* Remove unused are hosts set check
* Remove all traces of unused 'AreHostsSet' parameter
* Remove unused Hosts attribute
* Remove commented out use of snap.APIGateway.Hosts
Co-authored-by: Ashvitha Sridharan <ashvitha.sridharan@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Add a new envoy flag: "envoy_hcp_metrics_bind_socket_dir", a directory
where a unix socket will be created with the name
`<namespace>_<proxy_id>.sock` to forward Envoy metrics.
If set, this will configure:
- In bootstrap configuration a local stats_sink and static cluster.
These will forward metrics to a loopback listener sent over xDS.
- A dynamic listener listening at the socket path that the previously
defined static cluster is sending metrics to.
- A dynamic cluster that will forward traffic received at this listener
to the hcp-metrics-collector service.
Reasons for having a static cluster pointing at a dynamic listener:
- We want to secure the metrics stream using TLS, but the stats sink can
only be defined in bootstrap config. With dynamic listeners/clusters
we can use the proxy's leaf certificate issued by the Connect CA,
which isn't available at bootstrap time.
- We want to intelligently route to the HCP collector. Configuring its
addreess at bootstrap time limits our flexibility routing-wise. More
on this below.
Reasons for defining the collector as an upstream in `proxycfg`:
- The HCP collector will be deployed as a mesh service.
- Certificate management is taken care of, as mentioned above.
- Service discovery and routing logic is automatically taken care of,
meaning that no code changes are required in the xds package.
- Custom routing rules can be added for the collector using discovery
chain config entries. Initially the collector is expected to be
deployed to each admin partition, but in the future could be deployed
centrally in the default partition. These config entries could even be
managed by HCP itself.
Receiving an "acl not found" error from an RPC in the agent cache and the
streaming/event components will cause any request loops to cease under the
assumption that they will never work again if the token was destroyed. This
prevents log spam (#14144, #9738).
Unfortunately due to things like:
- authz requests going to stale servers that may not have witnessed the token
creation yet
- authz requests in a secondary datacenter happening before the tokens get
replicated to that datacenter
- authz requests from a primary TO a secondary datacenter happening before the
tokens get replicated to that datacenter
The caller will get an "acl not found" *before* the token exists, rather than
just after. The machinery added above in the linked PRs will kick in and
prevent the request loop from looping around again once the tokens actually
exist.
For `consul-dataplane` usages, where xDS is served by the Consul servers
rather than the clients ultimately this is not a problem because in that
scenario the `agent/proxycfg` machinery is on-demand and launched by a new xDS
stream needing data for a specific service in the catalog. If the watching
goroutines are terminated it ripples down and terminates the xDS stream, which
CDP will eventually re-establish and restart everything.
For Consul client usages, the `agent/proxycfg` machinery is ahead-of-time
launched at service registration time (called "local" in some of the proxycfg
machinery) so when the xDS stream comes in the data is already ready to go. If
the watching goroutines terminate it should terminate the xDS stream, but
there's no mechanism to re-spawn the watching goroutines. If the xDS stream
reconnects it will see no `ConfigSnapshot` and will not get one again until
the client agent is restarted, or the service is re-registered with something
changed in it.
This PR fixes a few things in the machinery:
- there was an inadvertent deadlock in fetching snapshot from the proxycfg
machinery by xDS, such that when the watching goroutine terminated the
snapshots would never be fetched. This caused some of the xDS machinery to
get indefinitely paused and not finish the teardown properly.
- Every 30s we now attempt to re-insert all locally registered services into
the proxycfg machinery.
- When services are re-inserted into the proxycfg machinery we special case
"dead" ones such that we unilaterally replace them rather that doing that
conditionally.
* Fix issue where terminating gateway service resolvers weren't properly cleaned up
* Add integration test for cleaning up resolvers
* Add changelog entry
* Use state test and drop integration test
* Leverage ServiceResolver ConnectTimeout for route timeouts to make TerminatingGateway upstream timeouts configurable
* Regenerate golden files
* Add RequestTimeout field
* Add changelog entry
Protobuf Refactoring for Multi-Module Cleanliness
This commit includes the following:
Moves all packages that were within proto/ to proto/private
Rewrites imports to account for the packages being moved
Adds in buf.work.yaml to enable buf workspaces
Names the proto-public buf module so that we can override the Go package imports within proto/buf.yaml
Bumps the buf version dependency to 1.14.0 (I was trying out the version to see if it would get around an issue - it didn't but it also doesn't break things and it seemed best to keep up with the toolchain changes)
Why:
In the future we will need to consume other protobuf dependencies such as the Google HTTP annotations for openapi generation or grpc-gateway usage.
There were some recent changes to have our own ratelimiting annotations.
The two combined were not working when I was trying to use them together (attempting to rebase another branch)
Buf workspaces should be the solution to the problem
Buf workspaces means that each module will have generated Go code that embeds proto file names relative to the proto dir and not the top level repo root.
This resulted in proto file name conflicts in the Go global protobuf type registry.
The solution to that was to add in a private/ directory into the path within the proto/ directory.
That then required rewriting all the imports.
Is this safe?
AFAICT yes
The gRPC wire protocol doesn't seem to care about the proto file names (although the Go grpc code does tack on the proto file name as Metadata in the ServiceDesc)
Other than imports, there were no changes to any generated code as a result of this.
* Include secret type when building resources from config snapshot
* First pass at generating envoy secrets from api-gateway snapshot
* Update comments for xDS update order
* Add secret type + corresponding golden files to existing tests
* Initialize test helpers for testing api-gateway resource generation
* Generate golden files for new api-gateway xDS resource test
* Support ADS for TLS certificates on api-gateway
* Configure TLS on api-gateway listeners
* Inline TLS cert code
* update tests
* Add SNI support so we can have multiple certificates
* Remove commented out section from helper
* regen deep-copy
* Add tcp tls test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Simple API Gateway e2e test for tcp routes
* Drop DNSSans since we don't front the Gateway with a leaf cert
* WIP listener tests for api-gateway
* Return early if no routes
* Add back in leaf cert to testing
* Fix merge conflicts
* Re-add kind to setup
* Fix iteration over listener upstreams
* New tcp listener test
* Add tests for API Gateway with TCP and HTTP routes
* Move zero-route check back
* Drop generateIngressDNSSANs
* Check for chains not routes
---------
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
Fix mesh gateways incorrectly matching peer locality.
This fixes an issue where local mesh gateways use an
incorrect address when attempting to forward traffic to a
peered datacenter. Prior to this change it would use the
lan address instead of the wan if the locality matched. This
should never be done for peering, since we must route all
traffic through the remote mesh gateway.
Prior to this PR, servers / agents would panic and crash if an ingress
or api gateway were configured to use a discovery chain that both:
1. Referenced a peered service
2. Had a mesh gateway mode of local
This could occur, because code for handling upstream watches was shared
between both connect-proxy and the gateways. As a short-term fix, this
PR ensures that the maps are always initialized for these gateway services.
This PR also wraps the proxycfg execution and service
registration calls with recover statements to ensure that future issues
like this do not put the server into an unrecoverable state.
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* [API Gateway] Add integration test for HTTP routes
* [API Gateway] Add integration test for conflicted TCP listeners
* [API Gateway] Update simple test to leverage intentions and multiple listeners
* Fix broken unit test
* PR suggestions
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Begin stubbing for SDS
* Start adding tests
* Remove second BoundAPIGateway case in glue
* TO BE PICKED: fix formatting of str
* WIP
* Fix merge conflict
* Implement HTTP Route to Discovery Chain config entries
* Stub out function to create discovery chain
* Add discovery chain merging code (#16131)
* Test adding TCP and HTTP routes
* Add some tests for the synthesizer
* Run go mod tidy
* Pairing with N8
* Run deep copy
* Clean up GatewayChainSynthesizer
* Fix missing assignment of BoundAPIGateway topic
* Separate out synthesizeChains and toIngressTLS
* Fix build errors
* Ensure synthesizer skips non-matching routes by protocol
* Rebase on N8s work
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* fix protobuf import
* Fix more merge conflict errors
* Fix synthesize test
* Run deep copy
* Add URLRewrite to proto
* Update agent/consul/discoverychain/gateway_tcproute.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Remove APIGatewayConfigEntry that was extra
* Error out if route kind is unknown
* Fix formatting errors in proto
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: Andrew Stucki <andrew.stucki@hashicorp.com>
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* Temporarily remove the secret type from resource generation
* Add Tproxy support to Envoy Extensions (this is needed for service to service validation)
* Add validation for Envoy configuration for an upstream service
* Use both /config_dump and /cluster to validate Envoy configuration
This is because of a bug in Envoy where the EndpointsConfigDump does not
include a cluster_name, making it impossible to match an endpoint to
verify it exists.
This removes endpoints support for builtin extensions since only the
validate plugin was using it, and it is no longer used. It also removes
test cases for endpoint validation. Endpoints validation now only occurs
in the top level test from config_dump and clusters json files.
Co-authored-by: Eric <eric@haberkorn.co>
* updated builtin extension to parse region directly from ARN
- added a unit test
- added some comments/light refactoring
* updated golden files with proper ARNs
- ARNs need to be right format now that they are being processed
* updated tests and integration tests
- removed 'region' from all EnvoyExtension arguments
- added properly formatted ARN which includes the same region found in the removed "Region" field: 'us-east-1'
Fix configuration merging for implicit tproxy upstreams.
Change the merging logic so that the wildcard upstream has correct proxy-defaults
and service-defaults values combined into it. It did not previously merge all fields,
and the wildcard upstream did not exist unless service-defaults existed (it ignored
proxy-defaults, essentially).
Change the way we fetch upstream configuration in the xDS layer so that it falls back
to the wildcard when no matching upstream is found. This is what allows implicit peer
upstreams to have the correct "merged" config.
Change proxycfg to always watch local mesh gateway endpoints whenever a peer upstream
is found. This simplifies the logic so that we do not have to inspect the "merged"
configuration on peer upstreams to extract the mesh gateway mode.
* extensions: refactor PluginConfiguration into a more generic type
ExtensionConfiguration
Also:
* adds endpoints configuration to lambda golden tests
* uses string constant for builtin/aws/lambda
Co-authored-by: Eric <eric@haberkorn.co>
* feat(ingress-gateway): support outlier detection of upstream service for ingress gateway
* changelog
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
Fix local mesh gateway with peering discovery chains.
Prior to this patch, discovery chains with peers would not
properly honor the mesh gateway mode for two reasons.
1. An incorrect target upstream ID was used to lookup the
mesh gateway mode. To fix this, the parent upstream uid is
now used instead of the discovery-chain-target-uid to find
the intended mesh gateway mode.
2. The watch for local mesh gateways was never initialized
for discovery chains. To fix this, the discovery chains are
now scanned, and a local GW watch is spawned if: the mesh
gateway mode is local and the target is a peering connection.
* update go version to 1.18 for api and sdk, go mod tidy
* removes ioutil usage everywhere which was deprecated in go1.16 in favour of io and os packages. Also introduces a lint rule which forbids use of ioutil going forward.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* Fix mesh gateway proxy-defaults not affecting upstreams.
* Clarify distinction with upstream settings
Top-level mesh gateway mode in proxy-defaults and service-defaults gets
merged into NodeService.Proxy.MeshGateway, and only gets merged with
the mode attached to an an upstream in proxycfg/xds.
* Fix mgw mode usage for peered upstreams
There were a couple issues with how mgw mode was being handled for
peered upstreams.
For starters, mesh gateway mode from proxy-defaults
and the top-level of service-defaults gets stored in
NodeService.Proxy.MeshGateway, but the upstream watch for peered data
was only considering the mesh gateway config attached in
NodeService.Proxy.Upstreams[i]. This means that applying a mesh gateway
mode via global proxy-defaults or service-defaults on the downstream
would not have an effect.
Separately, transparent proxy watches for peered upstreams didn't
consider mesh gateway mode at all.
This commit addresses the first issue by ensuring that we overlay the
upstream config for peered upstreams as we do for non-peered. The second
issue is addressed by re-using setupWatchesForPeeredUpstream when
handling transparent proxy updates.
Note that for transparent proxies we do not yet support mesh gateway
mode per upstream, so the NodeService.Proxy.MeshGateway mode is used.
* Fix upstream mesh gateway mode handling in xds
This commit ensures that when determining the mesh gateway mode for
peered upstreams we consider the NodeService.Proxy.MeshGateway config as
a baseline.
In absense of this change, setting a mesh gateway mode via
proxy-defaults or the top-level of service-defaults will not have an
effect for peered upstreams.
* Merge service/proxy defaults in cfg resolver
Previously the mesh gateway mode for connect proxies would be
merged at three points:
1. On servers, in ComputeResolvedServiceConfig.
2. On clients, in MergeServiceConfig.
3. On clients, in proxycfg/xds.
The first merge returns a ServiceConfigResponse where there is a
top-level MeshGateway config from proxy/service-defaults, along with
per-upstream config.
The second merge combines per-upstream config specified at the service
instance with per-upstream config specified centrally.
The third merge combines the NodeService.Proxy.MeshGateway
config containing proxy/service-defaults data with the per-upstream
mode. This third merge is easy to miss, which led to peered upstreams
not considering the mesh gateway mode from proxy-defaults.
This commit removes the third merge, and ensures that all mesh gateway
config is available at the upstream. This way proxycfg/xds do not need
to do additional overlays.
* Ensure that proxy-defaults is considered in wc
Upstream defaults become a synthetic Upstream definition under a
wildcard key "*". Now that proxycfg/xds expect Upstream definitions to
have the final MeshGateway values, this commit ensures that values from
proxy-defaults/service-defaults are the default for this synthetic
upstream.
* Add changelog.
Co-authored-by: freddygv <freddy@hashicorp.com>
Re-add ServerExternalAddresses parameter in GenerateToken endpoint
This reverts commit 5e156772f6
and adds extra functionality to support newer peering behaviors.
* ingress-gateways: don't log error when registering gateway
Previously, when an ingress gateway was registered without a
corresponding ingress gateway config entry, an error was logged
because the watch on the config entry returned a nil result.
This is expected so don't log an error.
Adds a user-configurable rate limiter to proxycfg snapshot delivery,
with a default limit of 250 updates per second.
This addresses a problem observed in our load testing of Consul
Dataplane where updating a "global" resource such as a wildcard
intention or the proxy-defaults config entry could starve the Raft or
Memberlist goroutines of CPU time, causing general cluster instability.
Replaces the reflection-based implementation of proxycfg's
ConfigSnapshot.Clone with code generated by deep-copy.
While load testing server-based xDS (for consul-dataplane) we discovered
this method is extremely expensive. The ConfigSnapshot struct, directly
or indirectly, contains a copy of many of the structs in the agent/structs
package, which creates a large graph for copystructure.Copy to traverse
at runtime, on every proxy reconfiguration.
Adds another datasource for proxycfg.HTTPChecks, for use on server agents. Typically these checks are performed by local client agents and there is no equivalent of this in agentless (where servers configure consul-dataplane proxies).
Hence, the data source is mostly a no-op on servers but in the case where the service is present within the local state, it delegates to the cache data source.
* Configure Envoy alpn_protocols based on service protocol
* define alpnProtocols in a more standard way
* http2 protocol should be h2 only
* formatting
* add test for getAlpnProtocol()
* create changelog entry
* change scope is connect-proxy
* ignore errors on ParseProxyConfig; fixes linter
* add tests for grpc and http2 public listeners
* remove newlines from PR
* Add alpn_protocol configuration for ingress gateway
* Guard against nil tlsContext
* add ingress gateway w/ TLS tests for gRPC and HTTP2
* getAlpnProtocols: add TCP protocol test
* add tests for ingress gateway with grpc/http2 and per-listener TLS config
* add tests for ingress gateway with grpc/http2 and per-listener TLS config
* add Gateway level TLS config with mixed protocol listeners to validate ALPN
* update changelog to include ingress-gateway
* add http/1.1 to http2 ALPN
* go fmt
* fix test on custom-trace-listener
Eric Haberkorn
John Maguire
Nitya Dhanushkodi
Ashvitha
R.B. Boyer
Andrew Stucki
Matt Keeler
Thomas Eckert
Derek Menteer
Nathan Coleman
Michael Wilkerson
cskh
James Oulman
Kyle Schochenmaier
Luke Kysow
Chris S. Kim
Dan Upton
Freddy
freddygv
Riddhi Shah