Use the service-defaults configuration entry to set default configurations for services, such as upstreams, protocols, and namespaces. Learn how to configure service-defaults.
This topic describes how to configure service defaults configuration entries. The service defaults configuration entry contains common configuration settings for service mesh services, such as upstreams and gateways. Refer to [Define service defaults](/consul/docs/services/usage/define-services#define-service-defaults) for usage information.
The following list outlines field hierarchy, language-specific data types, requirements, and any applicable default values in service defaults configuration entries. Click on a property name to view additional details.
Specifies the name of the name of the Consul admin partition that the configuration entry applies to. Refer to [Admin Partitions](/consul/docs/enterprise/admin-partitions) for additional information.
Specifies the default protocol for the service. In service mesh use cases, the `protocol` configuration is required to enable the following features and components:
You can set the global protocol for proxies in the [`proxy-defaults`](/consul/docs/connect/config-entries/proxy-defaults#default-protocol) configuration entry, but the protocol specified in the `service-defaults` configuration entry overrides the `proxy-defaults` configuration.
Specifies the strategy for allocating inbound connections to the service across Envoy proxy threads. The only supported value is `exact_balance`. By default, no connections are balanced. Refer to the [Envoy documentation](https://cloudnative.to/envoy/api-v3/config/listener/v3/listener.proto.html#config-listener-v3-listener-connectionbalanceconfig) for details.
- `direct`: The proxy's listeners must be dialed directly by the local application and other proxies.
- `transparent`: The service captures inbound and outbound traffic and redirects it through the proxy. The mode does not enable the traffic redirection. It instructs Consul to configure Envoy as if traffic is already being redirected.
Specifies the average number of requests per second allowed to the service. If the [`RequestsMaxBurst`](#ratelimits-instancelevel-requestsmaxburst) parameter is set, the number of requests per second to the service can temporarily exceed the limit specified in the `RequestsPerSecond` up to the value specified in `RequestsMaxBurst`. Internally, this is the refill rate of the token bucket used for rate limiting.
Specifies the maximum number of concurrent requests momentarily allowed to the service. When the limit is reached, Consul blocks additional requests. You must specify a value equal to or greater than the [`RequestsPerSecond`](#ratelimits-instancelevel-requestspersecond) parameter. If unspecified, this parameter defaults to `RequestsPerSecond`. Internally, this is the maximum size of the token bucket used for rate limiting.
Specifies a list of rate limiting configurations to apply to specific routes to the service. Each member of the `Routes` list must configure the `RequestsPerSecond` parameter and one of the following route-matching parameters:
Consul applies the rate limit configuration to the first matching route for each request. Refer to [Examples](#enable-request-rate-limit-on-a-prefixed-path) for example configurations.
The following table describes the parameters you can specify in the `Routes` map:
| Parameter | Description | Data type | Default |
| --- | --- | --- | --- |
| `PathExact` | Specifies the exact path to match on the request path. When using this field, do not configure `PathPrefix` or `PathRegex` in the same `Routes` map. | String | None |
| `PathPrefix` | Specifies the path prefix to match on the request path. When using this field, do not configure `PathExact` or `PathRegex` in the same `Routes` map. | String | None |
| `PathRegex` | Specifies a regular expression to match on the request path. When using this field, do not configure `PathExact` or `PathPrefix` in the same `Routes` map. The syntax is proxy-specific. When [using Envoy](/consul/docs/connect/proxies/envoy), refer to [the documentation for Envoy v1.11.2 or newer](https://github.com/google/re2/wiki/Syntax) or [the documentation for Envoy v1.11.1 or older](https://en.cppreference.com/w/cpp/regex/ecmascript), depending on the version of Envoy you use. | String | None |
| `RequestsPerSecond` | Specifies the average number of requests per second allowed to the service. Overrides the [`RequestsPerSecond`](#ratelimits-instancelevel-requestspersecond) parameter specified for the service. | Integer | None |
| `RequestsMaxBurst` | Specifies the maximum number of concurrent requests temporarily allowed to the service. When the limit is reached, Consul blocks additional requests. You must specify a value equal to or greater than the `Routes.RequestsPerSecond` parameter. Overrides the [`RequestsMaxBurst`](#ratelimits-instancelevel-requestsmaxburst) parameter specified for the service. | Integer | None |
Controls default upstream connection settings and custom overrides for individual upstream services. If your network contains federated datacenters, individual upstream configurations apply to all pairs of source and upstream destination services in the network. Refer to the following fields for details:
Specifies the name of the upstream service that the configuration applies to. We recommend that you do not use the `*` wildcard to avoid applying the configuration to unintended upstreams.
Specifies the namespace containing the upstream service that the configuration applies to. Do not use the `*` wildcard to prevent the configuration from applying to unintended upstreams.
We recommend configuring the protocol in the main [`Protocol`](#protocol) field of the configuration entry so that you can leverage [L7 features](/consul/docs/connect/manage-traffic). Setting the protocol in an upstream configuration limits L7 management functionality.
We recommend configuring the upstream timeout in the [`connection_timeout`](/consul/docs/connect/config-entries/service-resolver#connecttimeout) field of the `service-resolver` configuration entry for the upstream destination service. Doing so enables you to leverage [L7 features](/consul/docs/connect/manage-traffic). Configuring the timeout in the `service-defaults` upstream configuration limits L7 management functionality.
Map that contains the default mesh gateway `mode` field for the upstream. Refer to [Service Mesh Proxy Configuration](/consul/docs/connect/gateways/mesh-gateway#service-mesh-proxy-configuration) in the mesh gateway documentation for additional information.
- You can specify the following string values for the `mode` field:
- `none`: The service does not make outbound connections through a mesh gateway. Instead, the service makes outbound connections directly to the destination services.
The only supported value is `exact_balance`. By default, no connections are balanced. Refer to the [Envoy documentation](https://cloudnative.to/envoy/api-v3/config/listener/v3/listener.proto.html#config-listener-v3-listener-connectionbalanceconfig) for details.
| `MaxConnections` | Specifies the maximum number of connections a service instance can establish against the upstream. Define this limit for HTTP/1.1 traffic. | Integer | `0` |
| `MaxPendingRequests` | Specifies the maximum number of requests that are queued while waiting for a connection to establish. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
| `MaxConcurrentRequests` | Specifies the maximum number of concurrent requests. Define this limit for HTTP/2 traffic. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
| `Interval` | Specifies the time between checks. | String | `0s` |
| `MaxFailures` | Specifies the number of consecutive failures allowed per check interval. If exceeded, Consul removes the host from the load balancer. | Integer | `0` |
| `EnforcingConsecutive5xx` | Specifies a percentage that indicates how many times out of 100 that Consul ejects the host when it detects an outlier status. The outlier status is determined by consecutive errors in the 500-599 response range. | Integer | `100` |
| `MaxEjectionPercent` | Specifies the maximum percentage of an upstream cluster that Consul ejects when the proxy reports an outlier. Consul ejects at least one host when an outlier is detected regardless of the value. | Integer | `10` |
| `BaseEjectionTime` | Specifies the minimum amount of time that an ejected host must remain outside the cluster before rejoining. The real time is equal to the value of the `BaseEjectionTime` multiplied by the number of times the host has been ejected. | String | `30s` |
Specifies configurations that set default upstream settings. For information about overriding the default configurations for in for individual upstreams, refer to [`UpstreamConfig.Overrides`](#upstreamconfig-overrides).
We recommend configuring the protocol in the main [`Protocol`](#protocol) field of the configuration entry so that you can leverage [L7 features](/consul/docs/connect/manage-traffic). Setting the protocol in an upstream configuration limits L7 management functionality.
For non-Kubernetes environments, we recommend configuring the upstream timeout in the [`connection_timeout`](/consul/docs/connect/config-entries/service-resolver#connecttimeout) field of the `service-resolver` configuration entry for the upstream destination service. Doing so enables you to leverage [L7 features](/consul/docs/connect/manage-traffic). Configuring the timeout in the `service-defaults` upstream configuration limits L7 management functionality.
Specifies the default mesh gateway `mode` field for all upstreams. Refer to [Service Mesh Proxy Configuration](/consul/docs/connect/gateways/mesh-gateway#service-mesh-proxy-configuration) in the mesh gateway documentation for additional information.
- `None`: The service does not make outbound connections through a mesh gateway. Instead, the service makes outbound connections directly to the destination services.
Sets the strategy for allocating outbound connections from upstreams across Envoy proxy threads. The only supported value is `exact_balance`. By default, no connections are balanced. Refer to the [Envoy documentation](https://cloudnative.to/envoy/api-v3/config/listener/v3/listener.proto.html#config-listener-v3-listener-connectionbalanceconfig) for details.
| `MaxConnections` | Specifies the maximum number of connections a service instance can establish against the upstream. Define this limit for HTTP/1.1 traffic. | Integer | `0` |
| `MaxPendingRequests` | Specifies the maximum number of requests that are queued while waiting for a connection to establish. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
| `MaxConcurrentRequests` | Specifies the maximum number of concurrent requests. Define this limit for HTTP/2 traffic. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
Map that specifies a set of rules that enable Consul to remove hosts from the upstream cluster that are unreachable or that return errors. The following table describes the health check parameters you can configure:
| `Interval` | Specifies the time between checks. | String | `0s` |
| `MaxFailures` | Specifies the number of consecutive failures allowed per check interval. If exceeded, Consul removes the host from the load balancer. | Integer | `0` |
| `EnforcingConsecutive5xx ` | Specifies a percentage that indicates how many times out of 100 that Consul ejects the host when it detects an outlier status. The outlier status is determined by consecutive errors in the 500-599 response range. | Integer | `100` |
| `MaxEjectionPercent` | Specifies the maximum percentage of an upstream cluster that Consul ejects when the proxy reports an outlier. Consul ejects at least one host when an outlier is detected regardless of the value. | Integer | `10` |
| `BaseEjectionTime` | Specifies the minimum amount of time that an ejected host must remain outside the cluster before rejoining. The real time is equal to the value of the `BaseEjectionTime` multiplied by the number of times the host has been ejected. | String | `30s` |
Controls configurations specific to proxies in transparent mode. Refer to [Transparent Proxy Mode](/consul/docs/k8s/connect/transparent-proxy) for additional information.
| `OutboundListenerPort` | Specifies the port that the proxy listens on for outbound traffic. This must be the same port number where outbound application traffic is redirected. | Integer | `15001` |
| `DialedDirectly` | Enables transparent proxies to dial the proxy instance's IP address directly when set to `true`. Transparent proxies commonly dial upstreams at the `"virtual"` tagged address, which load balances across instances. Dialing individual instances can be helpful for stateful services, such as a database cluster with a leader. | Boolean | `false` |
List of extensions to modify Envoy proxy configuration. Refer to [Envoy Extensions](/consul/docs/connect/proxies/envoy-extensions) for additional information.
| `Name` | Specifies the name of the extension. | String | None |
| `Required` | Specify `true` to require the extension to apply successfully. <p>Use this parameter to ensure that extensions required for secure communication are not unintentionally bypassed.</p><p>When Envoy fails to apply a required extension, Consul logs an error and skips all extensions, leaving xDS resources unchanged. </p> | String | None |
| `Arguments` | Specifies the arguments to pass to the extension. Refer to the documentation for the extension you want to implement for additional information. | Map | None |
| `ConsulVersion` | Specifies the Consul [version constraint](https://github.com/hashicorp/go-version) for the extension. Consul validates the version constraint against the runtime version during xDS updates. If a non-matching version is in use, Consul logs and skips the extension. <p>Use this parameter to avoid upgrade issues when a configured extension is not compatible with a new version of Consul.</p> | String | None |
| `EnvoyVersion` | Specifies the Envoy [version constraint](https://github.com/hashicorp/go-version) for the extension. Consul validates the version constraint against the version of the running Envoy proxy during xDS updates. If a non-matching version is in use, Consul logs and skips the extension. <p>Use this parameter to avoid upgrade issues when a configured extension is not compatible with a new version of Envoy.</p> | String | None |
Configures the destination for service traffic through terminating gateways. Refer to [Terminating Gateway](/consul/docs/connect/gateways/terminating-gateway) for additional information.
To use the `Destination` block, proxy services must be in transparent proxy mode. Refer to [Enable transparent proxy mode](/consul/docs/k8s/connect/transparent-proxy/enable-transparent-proxy) for additional information.
| `Addresses` | Specifies a list of addresses for the destination. You can configure a list of hostnames and IP addresses. Wildcards are not supported. | List | None |
| `Port` | Specifies the port number of the destination. | Integer | `0` |
Specifies the timeout for HTTP requests to the local application instance. Applies to HTTP-based protocols only. If not specified, inherits the Envoy default for route timeouts.
- Default: Inherits `15s` from Envoy as the default
Specifies the default mesh gateway `mode` field for the service. Refer to [Service Mesh Proxy Configuration](/consul/docs/connect/gateways/mesh-gateway#service-mesh-proxy-configuration) in the mesh gateway documentation for additional information.
You can specify the following string values for the `mode` field:
- `none`: The service does not make outbound connections through a mesh gateway. Instead, the service makes outbound connections directly to the destination services.
Specifies default configurations for exposing HTTP paths through Envoy. Exposing paths through Envoy enables services to listen on `localhost` only. Applications that are not Consul service mesh-enabled can still contact an HTTP endpoint. Refer to [Expose Paths Configuration Reference](/consul/docs/proxies/proxy-config-reference#expose-paths-configuration-reference) for additional information and example configurations.
Exposes all HTTP and gRPC checks registered with the agent if set to `true`. Envoy exposes listeners for the checks and only accepts connections originating from localhost or Consul's [`advertise_addr`](/consul/docs/agent/config/config-files#advertise_addr). The ports for the listeners are dynamically allocated from the agent's [`expose_min_port`](/consul/docs/agent/config/config-files#expose_min_port) and [`expose_max_port`](/consul/docs/agent/config/config-files#expose_max_port) configurations.
We recommend enabling the `Checks` configuration when a Consul client cannot reach registered services over localhost, such as when Consul agents run in their own pods in Kubernetes.
Specifies a list of configuration maps that define paths to expose through Envoy when `Expose.Checks` is set to `true`. You can configure the following parameters for each map in the list:
| `Path` | Specifies the HTTP path to expose. You must prepend the path with a forward slash (`/`). | String | None |
| `LocalPathPort` | Specifies the port where the local service listens for connections to the path. | Integer | `0` |
| `ListenPort` | Specifies the port where the proxy listens for connections. The port must be available. If the port is unavailable, Envoy does not expose a listener for the path and the proxy registration still succeeds. | Integer | `0` |
| `Protocol` | Specifies the protocol of the listener. You can configure one of the following values: <li>`http`</li><li>`http2`: Use with gRPC traffic</li> | Integer | `http` |
Specifies the version of the Consul API for integrating with Kubernetes. The value must be `consul.hashicorp.com/v1alpha1`. The `apiVersion` field is not supported for non-Kubernetes deployments.
Specifies the Consul namespace that the configuration entry applies to. Refer to [Consul Enterprise](/consul/docs/k8s/crds#consul-enterprise) for information about how Consul namespaces map to Kubernetes Namespaces. Consul Community Edition (Consul CE) ignores the `metadata.namespace` configuration.
Map that contains the details about the `ServiceDefaults` configuration entry. The `apiVersion`, `kind`, and `metadata` fields are siblings of the `spec` field. All other configurations are children.
Specifies the default protocol for the service. In service service mesh use cases, the `protocol` configuration is required to enable the following features and components:
You can set the global protocol for proxies in the [`ProxyDefaults` configuration entry](/consul/docs/connect/config-entries/proxy-defaults#default-protocol), but the protocol specified in the `ServiceDefaults` configuration entry overrides the `ProxyDefaults` configuration.
Specifies the strategy for allocating inbound connections to the service across Envoy proxy threads. The only supported value is `exact_balance`. By default, no connections are balanced. Refer to the [Envoy documentation](https://cloudnative.to/envoy/api-v3/config/listener/v3/listener.proto.html#config-listener-v3-listener-connectionbalanceconfig) for details.
- `direct`: The proxy's listeners must be dialed directly by the local application and other proxies.
- `transparent`: The service captures inbound and outbound traffic and redirects it through the proxy. The mode does not enable the traffic redirection. It instructs Consul to configure Envoy as if traffic is already being redirected.
Specifies the average number of requests per second allowed to the service. If the [`requestsMaxBurst`](#spec-ratelimits-instancelevel-requestsmaxburst) parameter is set, the number of requests per second to the service can temporarily exceed the limit specified in the `requestsPerSecond` up to the value specified in `requestsMaxBurst`. Internally, this is the refill rate of the token bucket used for rate limiting.
Specifies the maximum number of concurrent requests momentarily allowed to the service. When the limit is reached, Consul blocks additional requests. You must specify a value equal to or greater than the [`requestsPerSecond`](#spec-ratelimits-instancelevel-requestspersecond) parameter. If unspecified, this parameter defaults to `requestsPerSecond`. Internally, this is the maximum size of the token bucket used for rate limiting.
Specifies a list of rate limiting configurations to apply to specific routes to the service. Each member of the `routes` list must configure the `requestsPerSecond` parameter and one of the following route-matching parameters:
Refer to [Examples](#enable-request-rate-limit-on-a-prefixed-path) for example configurations.
#### Values
- Default: None
- Data type: Map
The following table describes the parameters you can specify in the `routes` map:
| Parameter | Description | Data type | Default |
| --- | --- | --- | --- |
| `pathExact` | Specifies the exact path to match on the request path. When using this field, do not configure `pathPrefix` or `pathRegex` in the same `routes` map. | String | None |
| `pathPrefix` | Specifies the path prefix to match on the request path. When using this field, do not configure `pathExact` or `pathRegex` in the same `routes` map. | String | None |
| `pathRegex` | Specifies a regular expression to match on the request path. When using this field, do not configure `pathExact` or `pathPrefix` in the same `routes` map. The syntax is proxy-specific. When [using Envoy](/consul/docs/connect/proxies/envoy), refer to [the documentation for Envoy v1.11.2 or newer](https://github.com/google/re2/wiki/Syntax) or [the documentation for Envoy v1.11.1 or older](https://en.cppreference.com/w/cpp/regex/ecmascript), depending on the version of Envoy you use. | String | None |
| `requestsPerSecond` | Specifies the average number of requests per second allowed to the service. Overrides the [`requestsPerSecond`](#spec-ratelimits-instancelevel-requestspersecond) parameter specified for the service. | Integer | None |
| `requestsMaxBurst` | Specifies the maximum number of concurrent requests temporarily allowed to the service. When the limit is reached, Consul blocks additional requests. You must specify a value equal to or greater than the `routes.requestsPerSecond` parameter. Overrides the [`requestsMaxBurst`](#spec-ratelimits-instancelevel-requestsmaxburst) parameter specified for the service. | Integer | None |
Specifies a map that controls default upstream connection settings and custom overrides for individual upstream services. If your network contains federated datacenters, individual upstream configurations apply to all pairs of source and upstream destination services in the network.
Specifies the name of the upstream service that the configuration applies to. Do not use the `*` wildcard to prevent the configuration from applying to unintended upstreams.
Specifies the namespace containing the upstream service that the configuration applies to. Do not use the `*` wildcard to prevent the configuration from applying to unintended upstreams.
Specifies the protocol to use for requests to the upstream listener. We recommend configuring the protocol in the main [`protocol`](#protocol) field of the configuration entry so that you can leverage [L7 features](/consul/docs/connect/manage-traffic). Setting the protocol in an upstream configuration limits L7 management functionality.
We recommend configuring the upstream timeout in the [`connectTimeout`](/consul/docs/connect/config-entries/service-resolver#connecttimeout) field of the `ServiceResolver` CRD for the upstream destination service. Doing so enables you to leverage [L7 features](/consul/docs/connect/manage-traffic). Configuring the timeout in the `ServiceDefaults` upstream configuration limits L7 management functionality.
Map that contains the default mesh gateway `mode` field for the upstream. Refer to [Connect Proxy Configuration](/consul/docs/connect/gateways/mesh-gateway#connect-proxy-configuration) in the mesh gateway documentation for additional information.
You can specify the following string values for the `mode` field:
- `none`: The service does not make outbound connections through a mesh gateway. Instead, the service makes outbound connections directly to the destination services.
Sets the strategy for allocating outbound connections from the upstream across Envoy proxy threads. The only supported value is `exact_balance`. By default, no connections are balanced. Refer to the [Envoy documentation](https://cloudnative.to/envoy/api-v3/config/listener/v3/listener.proto.html#config-listener-v3-listener-connectionbalanceconfig) for details.
| `maxConnections` | Specifies the maximum number of connections a service instance can establish against the upstream. Define this limit for HTTP/1.1 traffic. | Integer | `0` |
| `maxPendingRequests` | Specifies the maximum number of requests that are queued while waiting for a connection to establish. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
| `maxConcurrentRequests` | Specifies the maximum number of concurrent requests. Define this limit for HTTP/2 traffic. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
| `interval` | Specifies the time between checks. | String | `0s` |
| `maxFailures` | Specifies the number of consecutive failures allowed per check interval. If exceeded, Consul removes the host from the load balancer. | Integer | `0` |
| `enforcingConsecutive5xx ` | Specifies a percentage that indicates how many times out of 100 that Consul ejects the host when it detects an outlier status. The outlier status is determined by consecutive errors in the 500-599 response range. | Integer | `100` |
| `maxEjectionPercent` | The maximum % of an upstream cluster that can be ejected due to outlier detection. Defaults to 10% but will eject at least one host regardless of the value. | Integer | `10` |
| `baseEjectionTime` | The base time that a host is ejected for. The real time is equal to the base time multiplied by the number of times the host has been ejected and is capped by max_ejection_time (Default 300s). Defaults to 30000ms or 30s. | String | `30s` |
Map of configurations that set default upstream configurations for the service. For information about overriding the default configurations for in for individual upstreams, refer to [`spec.upstreamConfig.overrides`](#spec-upstreamconfig-overrides).
Specifies default protocol for upstream listeners. We recommend configuring the protocol in the main [`Protocol`](#protocol) field of the configuration entry so that you can leverage [L7 features](/consul/docs/connect/manage-traffic). Setting the protocol in an upstream configuration limits L7 management functionality.
We recommend configuring the upstream timeout in the [`connectTimeout`](/consul/docs/connect/config-entries/service-resolver#connecttimeout) field of the `ServiceResolver` CRD for upstream destination services. Doing so enables you to leverage [L7 features](/consul/docs/connect/manage-traffic). Configuring the timeout in the `ServiceDefaults` upstream configuration limits L7 management functionality.
Specifies the default mesh gateway `mode` field for all upstreams. Refer to [Service Mesh Proxy Configuration](/consul/docs/connect/gateways/mesh-gateway#service-mesh-proxy-configuration) in the mesh gateway documentation for additional information.
You can specify the following string values for the `mode` field:
- `none`: The service does not make outbound connections through a mesh gateway. Instead, the service makes outbound connections directly to the destination services.
Sets the strategy for allocating outbound connections from upstreams across Envoy proxy threads. The only supported value is `exact_balance`. By default, no connections are balanced. Refer to the [Envoy documentation](https://cloudnative.to/envoy/api-v3/config/listener/v3/listener.proto.html#config-listener-v3-listener-connectionbalanceconfig) for details.
| `maxConnections` | Specifies the maximum number of connections a service instance can establish against the upstream. Define this limit for HTTP/1.1 traffic. | Integer | `0` |
| `maxPendingRequests` | Specifies the maximum number of requests that are queued while waiting for a connection to establish. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
| `maxConcurrentRequests` | Specifies the maximum number of concurrent requests. Define this limit for HTTP/2 traffic. An L7 protocol must be defined in the [`protocol`](#protocol) field for this limit to take effect. | Integer | `0` |
| `interval` | Specifies the time between checks. | String | `0s` |
| `maxFailures` | Specifies the number of consecutive failures allowed per check interval. If exceeded, Consul removes the host from the load balancer. | Integer | `0` |
| `enforcingConsecutive5xx ` | Specifies a percentage that indicates how many times out of 100 that Consul ejects the host when it detects an outlier status. The outlier status is determined by consecutive errors in the 500-599 response range. | Integer | `100` |
| `MaxEjectionPercent` | Specifies the maximum percentage of an upstream cluster that Consul ejects when the proxy reports an outlier. Consul ejects at least one host when an outlier is detected regardless of the value. | Integer | `10` |
| `BaseEjectionTime` | Specifies the minimum amount of time that an ejected host must remain outside the cluster before rejoining. The real time is equal to the value of the `BaseEjectionTime` multiplied by the number of times the host has been ejected. | String | `30s` |
Map of configurations specific to proxies in transparent mode. Refer to [Transparent Proxy](/consul/docs/connect/transparent-proxy) for additional information.
| `outboundListenerPort` | Specifies the port that the proxy listens on for outbound traffic. This must be the same port number where outbound application traffic is redirected. | Integer | `15001` |
| `dialedDirectly` | Enables transparent proxies to dial the proxy instance's IP address directly when set to `true`. Transparent proxies commonly dial upstreams at the `"virtual"` tagged address, which load balances across instances. Dialing individual instances can be helpful for stateful services, such as a database cluster with a leader. | Boolean | `false` |
List of extensions to modify Envoy proxy configuration. Refer to [Envoy Extensions](/consul/docs/connect/proxies/envoy-extensions) for additional information.
| `name` | Specifies the name of the extension. | String | None |
| `required` | Specify `true` to require the extension to apply successfully. <p>Use this parameter to ensure that extensions required for secure communication are not unintentionally bypassed.</p><p>When Envoy fails to apply a required extension, Consul logs an error and skips all extensions, leaving xDS resources unchanged. </p> | String | None |
| `arguments` | Specifies the arguments to pass to the extension. Refer to the documentation for the extension for additional information. | Map | None |
| `consulVersion` | Specifies the Consul [version constraint](https://github.com/hashicorp/go-version) for the extension. Consul validates the version constraint against the runtime version during xDS updates. If a non-matching version is in use, Consul logs and skips the extension. <p>Use this parameter to avoid upgrade issues when a configured extension is not compatible with a new version of Consul.</p> | String | None |
| `envoyVersion` | Specifies the Envoy [version constraint](https://github.com/hashicorp/go-version) for the extension. Consul validates the version constraint against the version of the running Envoy proxy during xDS updates. If a non-matching version is in use, Consul logs and skips the extension. <p>Use this parameter to avoid upgrade issues when a configured extension is not compatible with a new version of Envoy.</p> | String | None |
Map of configurations that specify one or more destinations for service traffic routed through terminating gateways. Refer to [Terminating Gateway](/consul/docs/connect/gateways/terminating-gateway) for additional information.
To use the `destination` block, proxy services must be in transparent proxy mode. Refer to [Enable transparent proxy mode](/consul/docs/k8s/connect/transparent-proxy/enable-transparent-proxy) for additional information.
| `addresses` | Specifies a list of addresses for the destination. You can configure a list of hostnames and IP addresses. Wildcards are not supported. | List | None |
| `port` | Specifies the port number of the destination. | Integer | `0` |
Specifies the timeout for HTTP requests to the local application instance. Applies to HTTP-based protocols only. If not specified, inherits the Envoy default for route timeouts.
Specifies the default mesh gateway `mode` field for the service. Refer to [Service Mesh Proxy Configuration](/consul/docs/connect/gateways/mesh-gateway#service-mesh-proxy-configuration) in the mesh gateway documentation for additional information.
You can specify the following string values for the `mode` field:
- `none`: The service does not make outbound connections through a mesh gateway. Instead, the service makes outbound connections directly to the destination services.
Specifies default configurations for exposing HTTP paths through Envoy. Exposing paths through Envoy enables services to listen on `localhost` only. Applications that are not Consul service mesh-enabled can still contact an HTTP endpoint. Refer to [Expose Paths Configuration Reference](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference) for additional information and example configurations.
Exposes all HTTP and gRPC checks registered with the agent if set to `true`. Envoy exposes listeners for the checks and only accepts connections originating from localhost or Consul's [`advertise_addr`](/consul/docs/agent/config/config-files#advertise_addr). The ports for the listeners are dynamically allocated from the agent's [`expose_min_port`](/consul/docs/agent/config/config-files#expose_min_port) and [`expose_max_port`](/consul/docs/agent/config/config-files#expose_max_port) configurations.
We recommend enabling the `Checks` configuration when a Consul client cannot reach registered services over localhost, such as when Consul agents run in their own pods in Kubernetes.
| `path` | Specifies the HTTP path to expose. You must prepend the path with a forward slash (`/`). | String | None |
| `localPathPort` | Specifies the port where the local service listens for connections to the path. | Integer | `0` |
| `listenPort` | Specifies the port where the proxy listens for connections. The port must be available. If the port is unavailable, Envoy does not expose a listener for the path and the proxy registration still succeeds. | Integer | `0` |
| `protocol` | Specifies the protocol of the listener. You can configure one of the following values: <li>`http`</li><li>`http2`: Use with gRPC traffic</li> | Integer | `http` |
You can also set the global default protocol for all proxies in the [`proxy-defaults` configuration entry](/consul/docs/connect/config-entries/proxy-defaults#default-protocol), but the protocol specified for individual service instances in the `service-defaults` configuration entry takes precedence over the globally-configured value set in the `proxy-defaults`.
The following example configures the default connection limits and mesh gateway mode for all of the `counting` service's upstreams. It also overrides the mesh gateway mode used when dialing the `dashboard` service in the `frontend` namespace.
Proxy services must be in transparent proxy mode to configure destinations. Refer to [Enable transparent proxy mode](/consul/docs/k8s/connect/transparent-proxy/enable-transparent-proxy) for additional information.
### Enable request rate limit for a service on all paths
The following example limits the request rate on all paths to `service-foo` to an average of `1000` requests per second but allows up to `1500` temporary concurrent requests.
The following example limits the request rate on all paths to `service-foo` to an average of `1000` requests per second but allows up to `1500` temporary concurrent requests. Request paths that begin with `/admin`, however, are limited to `20` requests per second.
