consul/agent/agent_test.go

6222 lines
167 KiB
Go
Raw Normal View History

2013-12-23 21:52:10 +00:00
package agent
import (
"bytes"
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
"context"
"crypto/md5"
"crypto/tls"
"crypto/x509"
"encoding/base64"
"encoding/json"
2013-12-23 21:52:10 +00:00
"fmt"
"math/rand"
"net"
"net/http"
"net/http/httptest"
"net/url"
2013-12-23 21:52:10 +00:00
"os"
2022-04-14 20:55:10 +00:00
"path"
"path/filepath"
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
"strconv"
2017-01-24 02:11:13 +00:00
"strings"
"sync"
2013-12-23 21:52:10 +00:00
"testing"
"time"
2014-11-19 19:51:25 +00:00
"github.com/golang/protobuf/jsonpb"
2022-04-14 20:55:10 +00:00
"github.com/google/go-cmp/cmp"
"github.com/google/go-cmp/cmp/cmpopts"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
"github.com/google/tcpproxy"
"github.com/hashicorp/go-hclog"
"github.com/hashicorp/hcp-scada-provider/capability"
"github.com/hashicorp/serf/coordinate"
"github.com/hashicorp/serf/serf"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/mock"
"github.com/stretchr/testify/require"
"golang.org/x/sync/errgroup"
"golang.org/x/time/rate"
"google.golang.org/grpc"
"gopkg.in/square/go-jose.v2/jwt"
"github.com/hashicorp/consul/agent/cache"
cachetype "github.com/hashicorp/consul/agent/cache-types"
"github.com/hashicorp/consul/agent/checks"
"github.com/hashicorp/consul/agent/config"
"github.com/hashicorp/consul/agent/connect"
"github.com/hashicorp/consul/agent/consul"
2022-09-30 15:33:49 +00:00
"github.com/hashicorp/consul/agent/hcp"
"github.com/hashicorp/consul/agent/hcp/scada"
"github.com/hashicorp/consul/agent/structs"
"github.com/hashicorp/consul/agent/token"
"github.com/hashicorp/consul/api"
"github.com/hashicorp/consul/internal/go-sso/oidcauth/oidcauthtest"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
"github.com/hashicorp/consul/ipaddr"
"github.com/hashicorp/consul/lib"
"github.com/hashicorp/consul/proto/pbautoconf"
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
"github.com/hashicorp/consul/sdk/freeport"
"github.com/hashicorp/consul/sdk/testutil"
"github.com/hashicorp/consul/sdk/testutil/retry"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
"github.com/hashicorp/consul/testrpc"
"github.com/hashicorp/consul/tlsutil"
2017-01-18 06:20:11 +00:00
"github.com/hashicorp/consul/types"
2013-12-23 21:52:10 +00:00
)
func getService(a *TestAgent, id string) *structs.NodeService {
return a.State.Service(structs.NewServiceID(id, nil))
}
func getCheck(a *TestAgent, id types.CheckID) *structs.HealthCheck {
return a.State.Check(structs.NewCheckID(id, nil))
}
func requireServiceExists(t *testing.T, a *TestAgent, id string) *structs.NodeService {
t.Helper()
svc := getService(a, id)
require.NotNil(t, svc, "missing service %q", id)
return svc
}
func requireServiceMissing(t *testing.T, a *TestAgent, id string) {
t.Helper()
require.Nil(t, getService(a, id), "have service %q (expected missing)", id)
}
func requireCheckExists(t *testing.T, a *TestAgent, id types.CheckID) *structs.HealthCheck {
t.Helper()
chk := getCheck(a, id)
require.NotNil(t, chk, "missing check %q", id)
return chk
}
func requireCheckMissing(t *testing.T, a *TestAgent, id types.CheckID) {
t.Helper()
require.Nil(t, getCheck(a, id), "have check %q (expected missing)", id)
}
func requireCheckExistsMap(t *testing.T, m interface{}, id types.CheckID) {
t.Helper()
require.Contains(t, m, structs.NewCheckID(id, nil), "missing check %q", id)
}
func requireCheckMissingMap(t *testing.T, m interface{}, id types.CheckID) {
t.Helper()
require.NotContains(t, m, structs.NewCheckID(id, nil), "have check %q (expected missing)", id)
}
func TestAgent_MultiStartStop(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
for i := 0; i < 10; i++ {
t.Run("", func(t *testing.T) {
t.Parallel()
a := NewTestAgent(t, "")
time.Sleep(250 * time.Millisecond)
a.Shutdown()
})
}
}
func TestAgent_ConnectClusterIDConfig(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
tests := []struct {
name string
hcl string
wantClusterID string
wantErr bool
}{
{
name: "default TestAgent has fixed cluster id",
hcl: "",
wantClusterID: connect.TestClusterID,
},
{
name: "no cluster ID specified sets to test ID",
hcl: "connect { enabled = true }",
wantClusterID: connect.TestClusterID,
},
{
2018-05-22 14:11:13 +00:00
name: "non-UUID cluster_id is fatal",
hcl: `connect {
enabled = true
ca_config {
cluster_id = "fake-id"
}
}`,
wantClusterID: "",
wantErr: true,
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
a := TestAgent{HCL: tt.hcl}
err := a.Start(t)
if tt.wantErr {
if err == nil {
t.Fatal("expected error, got nil")
}
return // don't run the rest of the test
2018-05-22 14:11:13 +00:00
}
if !tt.wantErr && err != nil {
t.Fatal(err)
2018-05-22 14:11:13 +00:00
}
defer a.Shutdown()
cfg := a.consulConfig()
assert.Equal(t, tt.wantClusterID, cfg.CAConfig.ClusterID)
})
}
}
func TestAgent_StartStop(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
2018-05-22 14:11:13 +00:00
defer a.Shutdown()
2013-12-23 21:52:10 +00:00
if err := a.Leave(); err != nil {
2013-12-23 21:52:10 +00:00
t.Fatalf("err: %v", err)
}
if err := a.Shutdown(); err != nil {
2013-12-23 21:52:10 +00:00
t.Fatalf("err: %v", err)
}
select {
case <-a.ShutdownCh():
2013-12-23 21:52:10 +00:00
default:
t.Fatalf("should be closed")
}
}
2015-01-16 01:24:15 +00:00
func TestAgent_RPCPing(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
2019-02-22 02:47:19 +00:00
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
2013-12-23 21:52:10 +00:00
var out struct{}
if err := a.RPC("Status.Ping", struct{}{}, &out); err != nil {
2013-12-23 21:52:10 +00:00
t.Fatalf("err: %v", err)
}
}
func TestAgent_TokenStore(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
acl {
tokens {
default = "user"
agent = "agent"
agent_recovery = "recovery"
}
}
`)
defer a.Shutdown()
if got, want := a.tokens.UserToken(), "user"; got != want {
t.Fatalf("got %q want %q", got, want)
}
if got, want := a.tokens.AgentToken(), "agent"; got != want {
t.Fatalf("got %q want %q", got, want)
}
if got, want := a.tokens.IsAgentRecoveryToken("recovery"), true; got != want {
t.Fatalf("got %v want %v", got, want)
}
}
func TestAgent_ReconnectConfigSettings(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
func() {
a := NewTestAgent(t, "")
defer a.Shutdown()
lan := a.consulConfig().SerfLANConfig.ReconnectTimeout
if lan != 3*24*time.Hour {
t.Fatalf("bad: %s", lan.String())
}
wan := a.consulConfig().SerfWANConfig.ReconnectTimeout
if wan != 3*24*time.Hour {
t.Fatalf("bad: %s", wan.String())
}
}()
func() {
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
reconnect_timeout = "24h"
reconnect_timeout_wan = "36h"
`)
defer a.Shutdown()
lan := a.consulConfig().SerfLANConfig.ReconnectTimeout
if lan != 24*time.Hour {
t.Fatalf("bad: %s", lan.String())
}
wan := a.consulConfig().SerfWANConfig.ReconnectTimeout
if wan != 36*time.Hour {
t.Fatalf("bad: %s", wan.String())
}
}()
}
func TestAgent_HTTPMaxHeaderBytes(t *testing.T) {
tests := []struct {
name string
maxHeaderBytes int
expectedHTTPResponse int
}{
{
"max header bytes 1 returns 431 http response when too large headers are sent",
1,
431,
},
{
"max header bytes 0 returns 200 http response, as the http.DefaultMaxHeaderBytes size of 1MB is used",
0,
200,
},
{
"negative maxHeaderBytes returns 200 http response, as the http.DefaultMaxHeaderBytes size of 1MB is used",
-10,
200,
},
}
for _, tt := range tests {
t.Run(tt.name, func(t *testing.T) {
caConfig := tlsutil.Config{}
tlsConf, err := tlsutil.NewConfigurator(caConfig, hclog.New(nil))
require.NoError(t, err)
bd := BaseDeps{
Deps: consul.Deps{
Logger: hclog.NewInterceptLogger(nil),
Tokens: new(token.Store),
TLSConfigurator: tlsConf,
GRPCConnPool: &fakeGRPCConnPool{},
},
RuntimeConfig: &config.RuntimeConfig{
HTTPAddrs: []net.Addr{
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: freeport.GetOne(t)},
},
HTTPMaxHeaderBytes: tt.maxHeaderBytes,
},
Cache: cache.New(cache.Options{}),
}
cfg := config.RuntimeConfig{BuildDate: time.Date(2000, 1, 1, 0, 0, 1, 0, time.UTC)}
bd, err = initEnterpriseBaseDeps(bd, &cfg)
require.NoError(t, err)
a, err := New(bd)
require.NoError(t, err)
a.startLicenseManager(testutil.TestContext(t))
srvs, err := a.listenHTTP()
require.NoError(t, err)
require.Equal(t, tt.maxHeaderBytes, a.config.HTTPMaxHeaderBytes)
ctx, cancel := context.WithTimeout(context.Background(), 2*time.Second)
t.Cleanup(cancel)
g := new(errgroup.Group)
for _, s := range srvs {
g.Go(s.Run)
}
require.Len(t, srvs, 1)
client := &http.Client{}
for _, s := range srvs {
u := url.URL{Scheme: s.Protocol, Host: s.Addr.String()}
req, err := http.NewRequest(http.MethodGet, u.String(), nil)
require.NoError(t, err)
// This is directly pulled from the testing of request limits in the net/http source
// https://github.com/golang/go/blob/go1.15.3/src/net/http/serve_test.go#L2897-L2900
var bytesPerHeader = len("header12345: val12345\r\n")
for i := 0; i < ((tt.maxHeaderBytes+4096)/bytesPerHeader)+1; i++ {
req.Header.Set(fmt.Sprintf("header%05d", i), fmt.Sprintf("val%05d", i))
}
resp, err := client.Do(req.WithContext(ctx))
require.NoError(t, err)
require.Equal(t, tt.expectedHTTPResponse, resp.StatusCode, "expected a '%d' http response, got '%d'", tt.expectedHTTPResponse, resp.StatusCode)
}
})
}
}
type fakeGRPCConnPool struct{}
func (f fakeGRPCConnPool) ClientConn(_ string) (*grpc.ClientConn, error) {
return nil, nil
}
func (f fakeGRPCConnPool) ClientConnLeader() (*grpc.ClientConn, error) {
return nil, nil
}
func (f fakeGRPCConnPool) SetGatewayResolver(_ func(string) string) {
}
func TestAgent_ReconnectConfigWanDisabled(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
ports { serf_wan = -1 }
reconnect_timeout_wan = "36h"
`)
defer a.Shutdown()
// This is also testing that we dont panic like before #4515
require.Nil(t, a.consulConfig().SerfWANConfig)
}
func TestAgent_AddService(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_AddService(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_AddService(t, "enable_central_service_config = true")
})
}
func testAgent_AddService(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
node_name = "node1"
`+extraHCL)
defer a.Shutdown()
duration3s, _ := time.ParseDuration("3s")
duration10s, _ := time.ParseDuration("10s")
tests := []struct {
desc string
srv *structs.NodeService
wantSrv func(ns *structs.NodeService)
chkTypes []*structs.CheckType
healthChks map[string]*structs.HealthCheck
}{
{
"one check",
&structs.NodeService{
ID: "svcid1",
Service: "svcname1",
Tags: []string{"tag1"},
Weights: nil, // nil weights...
Port: 8100,
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
// ... should be populated to avoid "IsSame" returning true during AE.
func(ns *structs.NodeService) {
ns.Weights = &structs.Weights{
Passing: 1,
Warning: 1,
}
},
[]*structs.CheckType{
{
CheckID: "check1",
Name: "name1",
TTL: time.Minute,
Notes: "note1",
},
},
map[string]*structs.HealthCheck{
"check1": {
Node: "node1",
CheckID: "check1",
Name: "name1",
Interval: "",
Timeout: "", // these are empty because a TTL was provided
Status: "critical",
Notes: "note1",
ServiceID: "svcid1",
ServiceName: "svcname1",
ServiceTags: []string{"tag1"},
Type: "ttl",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
},
},
{
"one http check with interval and duration",
&structs.NodeService{
ID: "svcid1",
Service: "svcname1",
Tags: []string{"tag1"},
Weights: nil, // nil weights...
Port: 8100,
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
// ... should be populated to avoid "IsSame" returning true during AE.
func(ns *structs.NodeService) {
ns.Weights = &structs.Weights{
Passing: 1,
Warning: 1,
}
},
[]*structs.CheckType{
{
CheckID: "check1",
Name: "name1",
HTTP: "http://localhost:8100/",
Interval: duration10s,
Timeout: duration3s,
Notes: "note1",
},
},
map[string]*structs.HealthCheck{
"check1": {
Node: "node1",
CheckID: "check1",
Name: "name1",
Interval: "10s",
Timeout: "3s",
Status: "critical",
Notes: "note1",
ServiceID: "svcid1",
ServiceName: "svcname1",
ServiceTags: []string{"tag1"},
Type: "http",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
},
},
{
"multiple checks",
&structs.NodeService{
ID: "svcid2",
Service: "svcname2",
Weights: &structs.Weights{
Passing: 2,
Warning: 1,
},
Tags: []string{"tag2"},
Port: 8200,
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
nil, // No change expected
[]*structs.CheckType{
{
CheckID: "check1",
Name: "name1",
TTL: time.Minute,
Notes: "note1",
},
{
CheckID: "check-noname",
TTL: time.Minute,
},
{
Name: "check-noid",
TTL: time.Minute,
},
{
TTL: time.Minute,
},
},
map[string]*structs.HealthCheck{
"check1": {
Node: "node1",
CheckID: "check1",
Name: "name1",
Interval: "",
Timeout: "", // these are empty bcause a TTL was provided
Status: "critical",
Notes: "note1",
ServiceID: "svcid2",
ServiceName: "svcname2",
ServiceTags: []string{"tag2"},
Type: "ttl",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
"check-noname": {
Node: "node1",
CheckID: "check-noname",
Name: "Service 'svcname2' check",
Interval: "",
Timeout: "", // these are empty because a TTL was provided
Status: "critical",
ServiceID: "svcid2",
ServiceName: "svcname2",
ServiceTags: []string{"tag2"},
Type: "ttl",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
"service:svcid2:3": {
Node: "node1",
CheckID: "service:svcid2:3",
Name: "check-noid",
Interval: "",
Timeout: "", // these are empty becuase a TTL was provided
Status: "critical",
ServiceID: "svcid2",
ServiceName: "svcname2",
ServiceTags: []string{"tag2"},
Type: "ttl",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
"service:svcid2:4": {
Node: "node1",
CheckID: "service:svcid2:4",
Name: "Service 'svcname2' check",
Interval: "",
Timeout: "", // these are empty because a TTL was provided
Status: "critical",
ServiceID: "svcid2",
ServiceName: "svcname2",
ServiceTags: []string{"tag2"},
Type: "ttl",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
},
},
},
}
for _, tt := range tests {
t.Run(tt.desc, func(t *testing.T) {
// check the service registration
t.Run(tt.srv.ID, func(t *testing.T) {
err := a.addServiceFromSource(tt.srv, tt.chkTypes, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
got := getService(a, tt.srv.ID)
// Make a copy since the tt.srv points to the one in memory in the local
// state still so changing it is a tautology!
want := *tt.srv
if tt.wantSrv != nil {
tt.wantSrv(&want)
}
require.Equal(t, &want, got)
require.True(t, got.IsSame(&want))
})
// check the health checks
for k, v := range tt.healthChks {
t.Run(k, func(t *testing.T) {
got := getCheck(a, types.CheckID(k))
require.Equal(t, v, got)
})
}
// check the ttl checks
for k := range tt.healthChks {
t.Run(k+" ttl", func(t *testing.T) {
chk := a.checkTTLs[structs.NewCheckID(types.CheckID(k), nil)]
if chk == nil {
t.Fatal("got nil want TTL check")
}
if got, want := string(chk.CheckID.ID), k; got != want {
t.Fatalf("got CheckID %v want %v", got, want)
}
if got, want := chk.TTL, time.Minute; got != want {
t.Fatalf("got TTL %v want %v", got, want)
}
})
}
})
}
}
// addServiceFromSource is a test helper that exists to maintain an old function
// signature that was used in many tests.
// Deprecated: use AddService
func (a *Agent) addServiceFromSource(service *structs.NodeService, chkTypes []*structs.CheckType, persist bool, token string, source configSource) error {
return a.AddService(AddServiceRequest{
Service: service,
chkTypes: chkTypes,
persist: persist,
token: token,
replaceExistingChecks: false,
Source: source,
})
}
func TestAgent_AddServices_AliasUpdateCheckNotReverted(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_AddServices_AliasUpdateCheckNotReverted(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_AddServices_AliasUpdateCheckNotReverted(t, "enable_central_service_config = true")
})
}
func testAgent_AddServices_AliasUpdateCheckNotReverted(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
node_name = "node1"
`+extraHCL)
defer a.Shutdown()
// It's tricky to get an UpdateCheck call to be timed properly so it lands
// right in the middle of an addServiceInternal call so we cheat a bit and
// rely upon alias checks to do that work for us. We add enough services
// that probabilistically one of them is going to end up properly in the
// critical section.
//
// The first number I picked here (10) surprisingly failed every time prior
// to PR #6144 solving the underlying problem.
const numServices = 10
services := make([]*structs.ServiceDefinition, numServices)
checkIDs := make([]types.CheckID, numServices)
services[0] = &structs.ServiceDefinition{
ID: "fake",
Name: "fake",
Port: 8080,
Checks: []*structs.CheckType{},
}
for i := 1; i < numServices; i++ {
name := fmt.Sprintf("web-%d", i)
services[i] = &structs.ServiceDefinition{
ID: name,
Name: name,
Port: 8080 + i,
Checks: []*structs.CheckType{
{
Name: "alias-for-fake-service",
AliasService: "fake",
},
},
}
checkIDs[i] = types.CheckID("service:" + name)
}
// Add all of the services quickly as you might do from config file snippets.
for _, service := range services {
ns := service.NodeService()
chkTypes, err := service.CheckTypes()
require.NoError(t, err)
require.NoError(t, a.addServiceFromSource(ns, chkTypes, false, service.Token, ConfigSourceLocal))
}
retry.Run(t, func(r *retry.R) {
gotChecks := a.State.Checks(nil)
for id, check := range gotChecks {
require.Equal(r, "passing", check.Status, "check %q is wrong", id)
require.Equal(r, "No checks found.", check.Output, "check %q is wrong", id)
}
})
}
func test_createAlias(t *testing.T, agent *TestAgent, chk *structs.CheckType, expectedResult string) func(r *retry.R) {
t.Helper()
serviceNum := rand.Int()
srv := &structs.NodeService{
Service: fmt.Sprintf("serviceAlias-%d", serviceNum),
Tags: []string{"tag1"},
Port: 8900 + serviceNum,
}
if srv.ID == "" {
srv.ID = fmt.Sprintf("serviceAlias-%d", serviceNum)
}
chk.Status = api.HealthWarning
if chk.CheckID == "" {
chk.CheckID = types.CheckID(fmt.Sprintf("check-%d", serviceNum))
}
err := agent.addServiceFromSource(srv, []*structs.CheckType{chk}, false, "", ConfigSourceLocal)
assert.NoError(t, err)
return func(r *retry.R) {
t.Helper()
found := false
for _, c := range agent.State.CheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()) {
if c.Check.CheckID == chk.CheckID {
found = true
assert.Equal(t, expectedResult, c.Check.Status, "Check state should be %s, was %s in %#v", expectedResult, c.Check.Status, c.Check)
srvID := structs.NewServiceID(srv.ID, structs.WildcardEnterpriseMetaInDefaultPartition())
if err := agent.Agent.State.RemoveService(srvID); err != nil {
fmt.Println("[DEBUG] Fail to remove service", srvID, ", err:=", err)
}
fmt.Println("[DEBUG] Service Removed", srvID, ", err:=", err)
break
}
}
assert.True(t, found)
}
}
// TestAgent_CheckAliasRPC test the Alias Check to be properly sync remotely
// and locally.
// It contains a few hacks such as unlockIndexOnNode because watch performed
// in CheckAlias.runQuery() waits for 1 min, so Shutdoww the agent might take time
// So, we ensure the agent will update regularilly the index
func TestAgent_CheckAliasRPC(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Helper()
a := NewTestAgent(t, `
node_name = "node1"
`)
srv := &structs.NodeService{
ID: "svcid1",
Service: "svcname1",
Tags: []string{"tag1"},
Port: 8100,
}
unlockIndexOnNode := func() {
// We ensure to not block and update Agent's index
srv.Tags = []string{fmt.Sprintf("tag-%s", time.Now())}
assert.NoError(t, a.waitForUp())
err := a.addServiceFromSource(srv, []*structs.CheckType{}, false, "", ConfigSourceLocal)
assert.NoError(t, err)
}
shutdownAgent := func() {
// This is to be sure Alias Checks on remote won't be blocked during 1 min
unlockIndexOnNode()
fmt.Println("[DEBUG] STARTING shutdown for TestAgent_CheckAliasRPC", time.Now())
go a.Shutdown()
unlockIndexOnNode()
fmt.Println("[DEBUG] DONE shutdown for TestAgent_CheckAliasRPC", time.Now())
}
defer shutdownAgent()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
assert.NoError(t, a.waitForUp())
err := a.addServiceFromSource(srv, []*structs.CheckType{}, false, "", ConfigSourceLocal)
assert.NoError(t, err)
retry.Run(t, func(r *retry.R) {
t.Helper()
var args structs.NodeSpecificRequest
args.Datacenter = "dc1"
args.Node = "node1"
args.AllowStale = true
var out structs.IndexedNodeServices
err := a.RPC("Catalog.NodeServices", &args, &out)
assert.NoError(r, err)
foundService := false
lookup := structs.NewServiceID("svcid1", structs.WildcardEnterpriseMetaInDefaultPartition())
for _, srv := range out.NodeServices.Services {
if lookup.Matches(srv.CompoundServiceID()) {
foundService = true
}
}
assert.True(r, foundService, "could not find svcid1 in %#v", out.NodeServices.Services)
})
checks := make([](func(*retry.R)), 0)
checks = append(checks, test_createAlias(t, a, &structs.CheckType{
Name: "Check_Local_Ok",
AliasService: "svcid1",
}, api.HealthPassing))
checks = append(checks, test_createAlias(t, a, &structs.CheckType{
Name: "Check_Local_Fail",
AliasService: "svcidNoExistingID",
}, api.HealthCritical))
checks = append(checks, test_createAlias(t, a, &structs.CheckType{
Name: "Check_Remote_Host_Ok",
AliasNode: "node1",
AliasService: "svcid1",
}, api.HealthPassing))
checks = append(checks, test_createAlias(t, a, &structs.CheckType{
Name: "Check_Remote_Host_Non_Existing_Service",
AliasNode: "node1",
AliasService: "svcidNoExistingID",
}, api.HealthCritical))
// We wait for max 5s for all checks to be in sync
{
for i := 0; i < 50; i++ {
unlockIndexOnNode()
allNonWarning := true
for _, chk := range a.State.Checks(structs.WildcardEnterpriseMetaInDefaultPartition()) {
if chk.Status == api.HealthWarning {
allNonWarning = false
}
}
if allNonWarning {
break
} else {
time.Sleep(100 * time.Millisecond)
}
}
}
for _, toRun := range checks {
unlockIndexOnNode()
retry.Run(t, toRun)
}
}
func TestAgent_AddServiceWithH2PINGCheck(t *testing.T) {
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
check := []*structs.CheckType{
{
CheckID: "test-h2ping-check",
Name: "test-h2ping-check",
H2PING: "localhost:12345",
TLSSkipVerify: true,
Interval: 10 * time.Second,
},
}
nodeService := &structs.NodeService{
ID: "test-h2ping-check-service",
Service: "test-h2ping-check-service",
}
err := a.addServiceFromSource(nodeService, check, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("Error registering service: %v", err)
}
requireCheckExists(t, a, "test-h2ping-check")
}
func TestAgent_AddServiceWithH2CPINGCheck(t *testing.T) {
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
check := []*structs.CheckType{
{
2021-10-05 02:12:26 +00:00
CheckID: "test-h2cping-check",
Name: "test-h2cping-check",
H2PING: "localhost:12345",
TLSSkipVerify: true,
Interval: 10 * time.Second,
H2PingUseTLS: false,
},
}
nodeService := &structs.NodeService{
ID: "test-h2cping-check-service",
Service: "test-h2cping-check-service",
}
err := a.addServiceFromSource(nodeService, check, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("Error registering service: %v", err)
}
requireCheckExists(t, a, "test-h2cping-check")
}
func TestAgent_AddServiceNoExec(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_AddServiceNoExec(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_AddServiceNoExec(t, "enable_central_service_config = true")
})
}
func testAgent_AddServiceNoExec(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
node_name = "node1"
`+extraHCL)
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
srv := &structs.NodeService{
ID: "svcid1",
Service: "svcname1",
Tags: []string{"tag1"},
Port: 8100,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: 15 * time.Second,
}
err := a.addServiceFromSource(srv, []*structs.CheckType{chk}, false, "", ConfigSourceLocal)
if err == nil || !strings.Contains(err.Error(), "Scripts are disabled on this agent") {
t.Fatalf("err: %v", err)
}
err = a.addServiceFromSource(srv, []*structs.CheckType{chk}, false, "", ConfigSourceRemote)
if err == nil || !strings.Contains(err.Error(), "Scripts are disabled on this agent") {
t.Fatalf("err: %v", err)
}
}
func TestAgent_AddServiceNoRemoteExec(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_AddServiceNoRemoteExec(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_AddServiceNoRemoteExec(t, "enable_central_service_config = true")
})
}
func testAgent_AddServiceNoRemoteExec(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
node_name = "node1"
enable_local_script_checks = true
`+extraHCL)
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
srv := &structs.NodeService{
ID: "svcid1",
Service: "svcname1",
Tags: []string{"tag1"},
Port: 8100,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: 15 * time.Second,
}
err := a.addServiceFromSource(srv, []*structs.CheckType{chk}, false, "", ConfigSourceRemote)
if err == nil || !strings.Contains(err.Error(), "Scripts are disabled on this agent") {
t.Fatalf("err: %v", err)
}
}
func TestAddServiceIPv4TaggedDefault(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Helper()
a := NewTestAgent(t, "")
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
srv := &structs.NodeService{
Service: "my_service",
ID: "my_service_id",
Port: 8100,
Address: "10.0.1.2",
}
err := a.addServiceFromSource(srv, []*structs.CheckType{}, false, "", ConfigSourceRemote)
require.Nil(t, err)
ns := a.State.Service(structs.NewServiceID("my_service_id", nil))
require.NotNil(t, ns)
svcAddr := structs.ServiceAddress{Address: srv.Address, Port: srv.Port}
require.Equal(t, svcAddr, ns.TaggedAddresses[structs.TaggedAddressLANIPv4])
require.Equal(t, svcAddr, ns.TaggedAddresses[structs.TaggedAddressWANIPv4])
_, ok := ns.TaggedAddresses[structs.TaggedAddressLANIPv6]
require.False(t, ok)
_, ok = ns.TaggedAddresses[structs.TaggedAddressWANIPv6]
require.False(t, ok)
}
func TestAddServiceIPv6TaggedDefault(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Helper()
a := NewTestAgent(t, "")
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
srv := &structs.NodeService{
Service: "my_service",
ID: "my_service_id",
Port: 8100,
Address: "::5",
}
err := a.addServiceFromSource(srv, []*structs.CheckType{}, false, "", ConfigSourceRemote)
require.Nil(t, err)
ns := a.State.Service(structs.NewServiceID("my_service_id", nil))
require.NotNil(t, ns)
svcAddr := structs.ServiceAddress{Address: srv.Address, Port: srv.Port}
require.Equal(t, svcAddr, ns.TaggedAddresses[structs.TaggedAddressLANIPv6])
require.Equal(t, svcAddr, ns.TaggedAddresses[structs.TaggedAddressWANIPv6])
_, ok := ns.TaggedAddresses[structs.TaggedAddressLANIPv4]
require.False(t, ok)
_, ok = ns.TaggedAddresses[structs.TaggedAddressWANIPv4]
require.False(t, ok)
}
func TestAddServiceIPv4TaggedSet(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Helper()
a := NewTestAgent(t, "")
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
srv := &structs.NodeService{
Service: "my_service",
ID: "my_service_id",
Port: 8100,
Address: "10.0.1.2",
TaggedAddresses: map[string]structs.ServiceAddress{
structs.TaggedAddressWANIPv4: {
Address: "10.100.200.5",
Port: 8100,
},
},
}
err := a.addServiceFromSource(srv, []*structs.CheckType{}, false, "", ConfigSourceRemote)
require.Nil(t, err)
ns := a.State.Service(structs.NewServiceID("my_service_id", nil))
require.NotNil(t, ns)
svcAddr := structs.ServiceAddress{Address: srv.Address, Port: srv.Port}
require.Equal(t, svcAddr, ns.TaggedAddresses[structs.TaggedAddressLANIPv4])
require.Equal(t, structs.ServiceAddress{Address: "10.100.200.5", Port: 8100}, ns.TaggedAddresses[structs.TaggedAddressWANIPv4])
_, ok := ns.TaggedAddresses[structs.TaggedAddressLANIPv6]
require.False(t, ok)
_, ok = ns.TaggedAddresses[structs.TaggedAddressWANIPv6]
require.False(t, ok)
}
func TestAddServiceIPv6TaggedSet(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Helper()
a := NewTestAgent(t, "")
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
srv := &structs.NodeService{
Service: "my_service",
ID: "my_service_id",
Port: 8100,
Address: "::5",
TaggedAddresses: map[string]structs.ServiceAddress{
structs.TaggedAddressWANIPv6: {
Address: "::6",
Port: 8100,
},
},
}
err := a.addServiceFromSource(srv, []*structs.CheckType{}, false, "", ConfigSourceRemote)
require.Nil(t, err)
ns := a.State.Service(structs.NewServiceID("my_service_id", nil))
require.NotNil(t, ns)
svcAddr := structs.ServiceAddress{Address: srv.Address, Port: srv.Port}
require.Equal(t, svcAddr, ns.TaggedAddresses[structs.TaggedAddressLANIPv6])
require.Equal(t, structs.ServiceAddress{Address: "::6", Port: 8100}, ns.TaggedAddresses[structs.TaggedAddressWANIPv6])
_, ok := ns.TaggedAddresses[structs.TaggedAddressLANIPv4]
require.False(t, ok)
_, ok = ns.TaggedAddresses[structs.TaggedAddressWANIPv4]
require.False(t, ok)
}
func TestAgent_RemoveService(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_RemoveService(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_RemoveService(t, "enable_central_service_config = true")
})
}
func testAgent_RemoveService(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, extraHCL)
defer a.Shutdown()
// Remove a service that doesn't exist
if err := a.RemoveService(structs.NewServiceID("redis", nil)); err != nil {
t.Fatalf("err: %v", err)
}
// Remove without an ID
if err := a.RemoveService(structs.NewServiceID("", nil)); err == nil {
t.Fatalf("should have errored")
}
// Removing a service with a single check works
{
srv := &structs.NodeService{
ID: "memcache",
Service: "memcache",
Port: 8000,
}
chkTypes := []*structs.CheckType{{TTL: time.Minute}}
if err := a.addServiceFromSource(srv, chkTypes, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Add a check after the fact with a specific check ID
check := &structs.CheckDefinition{
ID: "check2",
Name: "check2",
ServiceID: "memcache",
TTL: time.Minute,
}
hc := check.HealthCheck("node1")
if err := a.AddCheck(hc, check.CheckType(), false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %s", err)
}
if err := a.RemoveService(structs.NewServiceID("memcache", nil)); err != nil {
t.Fatalf("err: %s", err)
}
require.Nil(t, a.State.Check(structs.NewCheckID("service:memcache", nil)), "have memcache check")
require.Nil(t, a.State.Check(structs.NewCheckID("check2", nil)), "have check2 check")
}
// Removing a service with multiple checks works
{
// add a service to remove
srv := &structs.NodeService{
ID: "redis",
Service: "redis",
Port: 8000,
}
chkTypes := []*structs.CheckType{
{TTL: time.Minute},
{TTL: 30 * time.Second},
}
if err := a.addServiceFromSource(srv, chkTypes, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// add another service that wont be affected
srv = &structs.NodeService{
ID: "mysql",
Service: "mysql",
Port: 3306,
}
chkTypes = []*structs.CheckType{
{TTL: time.Minute},
{TTL: 30 * time.Second},
}
if err := a.addServiceFromSource(srv, chkTypes, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Remove the service
if err := a.RemoveService(structs.NewServiceID("redis", nil)); err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a state mapping
requireServiceMissing(t, a, "redis")
// Ensure checks were removed
requireCheckMissing(t, a, "service:redis:1")
requireCheckMissing(t, a, "service:redis:2")
requireCheckMissingMap(t, a.checkTTLs, "service:redis:1")
requireCheckMissingMap(t, a.checkTTLs, "service:redis:2")
// check the mysql service is unnafected
requireCheckExistsMap(t, a.checkTTLs, "service:mysql:1")
requireCheckExists(t, a, "service:mysql:1")
requireCheckExistsMap(t, a.checkTTLs, "service:mysql:2")
requireCheckExists(t, a, "service:mysql:2")
}
}
func TestAgent_RemoveServiceRemovesAllChecks(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_RemoveServiceRemovesAllChecks(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_RemoveServiceRemovesAllChecks(t, "enable_central_service_config = true")
})
}
func testAgent_RemoveServiceRemovesAllChecks(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
node_name = "node1"
`+extraHCL)
defer a.Shutdown()
svc := &structs.NodeService{ID: "redis", Service: "redis", Port: 8000, EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition()}
chk1 := &structs.CheckType{CheckID: "chk1", Name: "chk1", TTL: time.Minute}
chk2 := &structs.CheckType{CheckID: "chk2", Name: "chk2", TTL: 2 * time.Minute}
2019-10-17 18:33:11 +00:00
hchk1 := &structs.HealthCheck{
Node: "node1",
CheckID: "chk1",
Name: "chk1",
Status: "critical",
ServiceID: "redis",
ServiceName: "redis",
Type: "ttl",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
2019-10-17 18:33:11 +00:00
}
hchk2 := &structs.HealthCheck{Node: "node1",
CheckID: "chk2",
Name: "chk2",
Status: "critical",
ServiceID: "redis",
ServiceName: "redis",
Type: "ttl",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
2019-10-17 18:33:11 +00:00
}
// register service with chk1
if err := a.addServiceFromSource(svc, []*structs.CheckType{chk1}, false, "", ConfigSourceLocal); err != nil {
t.Fatal("Failed to register service", err)
}
// verify chk1 exists
requireCheckExists(t, a, "chk1")
// update the service with chk2
if err := a.addServiceFromSource(svc, []*structs.CheckType{chk2}, false, "", ConfigSourceLocal); err != nil {
t.Fatal("Failed to update service", err)
}
// check that both checks are there
require.Equal(t, hchk1, getCheck(a, "chk1"))
require.Equal(t, hchk2, getCheck(a, "chk2"))
// Remove service
if err := a.RemoveService(structs.NewServiceID("redis", nil)); err != nil {
t.Fatal("Failed to remove service", err)
}
// Check that both checks are gone
requireCheckMissing(t, a, "chk1")
requireCheckMissing(t, a, "chk2")
}
// TestAgent_IndexChurn is designed to detect a class of issues where
// we would have unnecessary catalog churn from anti-entropy. See issues
// #3259, #3642, #3845, and #3866.
func TestAgent_IndexChurn(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
2018-02-06 00:18:29 +00:00
t.Parallel()
t.Run("no tags", func(t *testing.T) {
verifyIndexChurn(t, nil)
})
t.Run("with tags", func(t *testing.T) {
verifyIndexChurn(t, []string{"foo", "bar"})
})
}
// verifyIndexChurn registers some things and runs anti-entropy a bunch of times
// in a row to make sure there are no index bumps.
func verifyIndexChurn(t *testing.T, tags []string) {
t.Helper()
a := NewTestAgent(t, "")
2018-02-06 00:18:29 +00:00
defer a.Shutdown()
2018-09-07 14:30:47 +00:00
weights := &structs.Weights{
Passing: 1,
Warning: 1,
}
// Ensure we have a leader before we start adding the services
testrpc.WaitForLeader(t, a.RPC, "dc1")
2018-02-06 00:18:29 +00:00
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Port: 8000,
Tags: tags,
2018-09-07 14:30:47 +00:00
Weights: weights,
2018-02-06 00:18:29 +00:00
}
if err := a.addServiceFromSource(svc, nil, true, "", ConfigSourceLocal); err != nil {
2018-02-06 00:18:29 +00:00
t.Fatalf("err: %v", err)
}
chk := &structs.HealthCheck{
CheckID: "redis-check",
Name: "Service-level check",
2018-02-06 00:18:29 +00:00
ServiceID: "redis",
Status: api.HealthCritical,
}
chkt := &structs.CheckType{
TTL: time.Hour,
}
if err := a.AddCheck(chk, chkt, true, "", ConfigSourceLocal); err != nil {
2018-02-06 00:18:29 +00:00
t.Fatalf("err: %v", err)
}
chk = &structs.HealthCheck{
CheckID: "node-check",
Name: "Node-level check",
Status: api.HealthCritical,
}
chkt = &structs.CheckType{
TTL: time.Hour,
}
if err := a.AddCheck(chk, chkt, true, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
2018-02-06 00:18:29 +00:00
if err := a.sync.State.SyncFull(); err != nil {
t.Fatalf("err: %v", err)
}
2018-02-06 00:18:29 +00:00
args := &structs.ServiceSpecificRequest{
Datacenter: "dc1",
ServiceName: "redis",
}
var before structs.IndexedCheckServiceNodes
// This sleep is so that the serfHealth check is added to the agent
// A value of 375ms is sufficient enough time to ensure the serfHealth
// check is added to an agent. 500ms so that we don't see flakiness ever.
time.Sleep(500 * time.Millisecond)
if err := a.RPC("Health.ServiceNodes", args, &before); err != nil {
2018-02-06 00:18:29 +00:00
t.Fatalf("err: %v", err)
}
for _, name := range before.Nodes[0].Checks {
a.logger.Debug("Registered node", "node", name.Name)
}
if got, want := len(before.Nodes), 1; got != want {
t.Fatalf("got %d want %d", got, want)
}
if got, want := len(before.Nodes[0].Checks), 3; /* incl. serfHealth */ got != want {
2018-02-06 00:18:29 +00:00
t.Fatalf("got %d want %d", got, want)
}
for i := 0; i < 10; i++ {
a.logger.Info("Sync in progress", "iteration", i+1)
2018-02-06 00:18:29 +00:00
if err := a.sync.State.SyncFull(); err != nil {
t.Fatalf("err: %v", err)
}
}
// If this test fails here this means that the Consul-X-Index
// has changed for the RPC, which means that idempotent ops
// are not working as intended.
var after structs.IndexedCheckServiceNodes
if err := a.RPC("Health.ServiceNodes", args, &after); err != nil {
2018-02-06 00:18:29 +00:00
t.Fatalf("err: %v", err)
}
require.Equal(t, before, after)
2018-02-06 00:18:29 +00:00
}
func TestAgent_AddCheck(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
enable_script_checks = true
`)
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "mem",
Name: "memory util",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: 15 * time.Second,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a check mapping
sChk := requireCheckExists(t, a, "mem")
// Ensure our check is in the right state
if sChk.Status != api.HealthCritical {
t.Fatalf("check not critical")
}
// Ensure a TTL is setup
requireCheckExistsMap(t, a.checkMonitors, "mem")
}
func TestAgent_AddCheck_StartPassing(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
enable_script_checks = true
`)
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "mem",
Name: "memory util",
Status: api.HealthPassing,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: 15 * time.Second,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a check mapping
sChk := requireCheckExists(t, a, "mem")
// Ensure our check is in the right state
if sChk.Status != api.HealthPassing {
t.Fatalf("check not passing")
}
// Ensure a TTL is setup
requireCheckExistsMap(t, a.checkMonitors, "mem")
}
func TestAgent_AddCheck_MinInterval(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
enable_script_checks = true
`)
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "mem",
Name: "memory util",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: time.Microsecond,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a check mapping
requireCheckExists(t, a, "mem")
// Ensure a TTL is setup
if mon, ok := a.checkMonitors[structs.NewCheckID("mem", nil)]; !ok {
t.Fatalf("missing mem monitor")
} else if mon.Interval != checks.MinInterval {
t.Fatalf("bad mem monitor interval")
}
}
func TestAgent_AddCheck_MissingService(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
enable_script_checks = true
`)
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "baz",
Name: "baz check 1",
ServiceID: "baz",
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: time.Microsecond,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err == nil || err.Error() != fmt.Sprintf("ServiceID %q does not exist", structs.ServiceIDString("baz", nil)) {
t.Fatalf("expected service id error, got: %v", err)
}
}
func TestAgent_AddCheck_RestoreState(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// Create some state and persist it
ttl := &checks.CheckTTL{
CheckID: structs.NewCheckID("baz", nil),
TTL: time.Minute,
}
err := a.persistCheckState(ttl, api.HealthPassing, "yup")
if err != nil {
t.Fatalf("err: %s", err)
}
// Build and register the check definition and initial state
health := &structs.HealthCheck{
Node: "foo",
CheckID: "baz",
Name: "baz check 1",
}
chk := &structs.CheckType{
TTL: time.Minute,
}
err = a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %s", err)
}
// Ensure the check status was restored during registration
check := requireCheckExists(t, a, "baz")
if check.Status != api.HealthPassing {
t.Fatalf("bad: %#v", check)
}
if check.Output != "yup" {
t.Fatalf("bad: %#v", check)
}
}
func TestAgent_AddCheck_ExecDisable(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "mem",
Name: "memory util",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: 15 * time.Second,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err == nil || !strings.Contains(err.Error(), "Scripts are disabled on this agent") {
t.Fatalf("err: %v", err)
}
// Ensure we don't have a check mapping
requireCheckMissing(t, a, "mem")
err = a.AddCheck(health, chk, false, "", ConfigSourceRemote)
if err == nil || !strings.Contains(err.Error(), "Scripts are disabled on this agent") {
t.Fatalf("err: %v", err)
}
// Ensure we don't have a check mapping
requireCheckMissing(t, a, "mem")
}
func TestAgent_AddCheck_ExecRemoteDisable(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
enable_local_script_checks = true
`)
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
health := &structs.HealthCheck{
Node: "foo",
CheckID: "mem",
Name: "memory util",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: 15 * time.Second,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceRemote)
if err == nil || !strings.Contains(err.Error(), "Scripts are disabled on this agent from remote calls") {
t.Fatalf("err: %v", err)
}
// Ensure we don't have a check mapping
requireCheckMissing(t, a, "mem")
}
2017-12-27 04:35:22 +00:00
func TestAgent_AddCheck_GRPC(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
2017-12-27 04:35:22 +00:00
t.Parallel()
a := NewTestAgent(t, "")
2017-12-27 04:35:22 +00:00
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "grpchealth",
Name: "grpc health checking protocol",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
GRPC: "localhost:12345/package.Service",
Interval: 15 * time.Second,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
2017-12-27 04:35:22 +00:00
if err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a check mapping
sChk := requireCheckExists(t, a, "grpchealth")
2017-12-27 04:35:22 +00:00
// Ensure our check is in the right state
if sChk.Status != api.HealthCritical {
t.Fatalf("check not critical")
}
// Ensure a check is setup
requireCheckExistsMap(t, a.checkGRPCs, "grpchealth")
2017-12-27 04:35:22 +00:00
}
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
func TestAgent_RestoreServiceWithAliasCheck(t *testing.T) {
// t.Parallel() don't even think about making this parallel
// This test is very contrived and tests for the absence of race conditions
// related to the implementation of alias checks. As such it is slow,
// serial, full of sleeps and retries, and not generally a great test to
// run all of the time.
//
// That said it made it incredibly easy to root out various race conditions
// quite successfully.
//
// The original set of races was between:
//
// - agent startup reloading Services and Checks from disk
// - API requests to also re-register those same Services and Checks
// - the goroutines for the as-yet-to-be-stopped CheckAlias goroutines
if os.Getenv("SLOWTEST") != "1" {
t.Skip("skipping slow test; set SLOWTEST=1 to run")
return
}
// We do this so that the agent logs and the informational messages from
// the test itself are interwoven properly.
logf := func(t *testing.T, a *TestAgent, format string, args ...interface{}) {
a.logger.Info("testharness: " + fmt.Sprintf(format, args...))
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
}
cfg := `
server = false
bootstrap = false
enable_central_service_config = false
`
a := StartTestAgent(t, TestAgent{HCL: cfg})
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
defer a.Shutdown()
handler := http.HandlerFunc(func(w http.ResponseWriter, req *http.Request) {
w.WriteHeader(http.StatusOK)
_, _ = w.Write([]byte("OK\n"))
})
testHTTPServer := httptest.NewServer(handler)
t.Cleanup(testHTTPServer.Close)
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
registerServicesAndChecks := func(t *testing.T, a *TestAgent) {
// add one persistent service with a simple check
require.NoError(t, a.addServiceFromSource(
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
&structs.NodeService{
ID: "ping",
Service: "ping",
Port: 8000,
},
[]*structs.CheckType{
{
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
HTTP: testHTTPServer.URL,
Method: "GET",
Interval: 5 * time.Second,
Timeout: 1 * time.Second,
},
},
true, "", ConfigSourceLocal,
))
// add one persistent sidecar service with an alias check in the manner
// of how sidecar_service would add it
require.NoError(t, a.addServiceFromSource(
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
&structs.NodeService{
ID: "ping-sidecar-proxy",
Service: "ping-sidecar-proxy",
Port: 9000,
},
[]*structs.CheckType{
{
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
Name: "Connect Sidecar Aliasing ping",
AliasService: "ping",
},
},
true, "", ConfigSourceLocal,
))
}
retryUntilCheckState := func(t *testing.T, a *TestAgent, checkID string, expectedStatus string) {
t.Helper()
retry.Run(t, func(r *retry.R) {
chk := requireCheckExists(t, a, types.CheckID(checkID))
if chk.Status != expectedStatus {
logf(t, a, "check=%q expected status %q but got %q", checkID, expectedStatus, chk.Status)
r.Fatalf("check=%q expected status %q but got %q", checkID, expectedStatus, chk.Status)
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
}
logf(t, a, "check %q has reached desired status %q", checkID, expectedStatus)
})
}
registerServicesAndChecks(t, a)
time.Sleep(1 * time.Second)
retryUntilCheckState(t, a, "service:ping", api.HealthPassing)
retryUntilCheckState(t, a, "service:ping-sidecar-proxy", api.HealthPassing)
logf(t, a, "==== POWERING DOWN ORIGINAL ====")
require.NoError(t, a.Shutdown())
time.Sleep(1 * time.Second)
futureHCL := cfg + `
node_id = "` + string(a.Config.NodeID) + `"
node_name = "` + a.Config.NodeName + `"
`
restartOnce := func(idx int, t *testing.T) {
t.Helper()
// Reload and retain former NodeID and data directory.
a2 := StartTestAgent(t, TestAgent{HCL: futureHCL, DataDir: a.DataDir})
agent: fix several data races and bugs related to node-local alias checks (#5876) The observed bug was that a full restart of a consul datacenter (servers and clients) in conjunction with a restart of a connect-flavored application with bring-your-own-service-registration logic would very frequently cause the envoy sidecar service check to never reflect the aliased service. Over the course of investigation several bugs and unfortunate interactions were corrected: (1) local.CheckState objects were only shallow copied, but the key piece of data that gets read and updated is one of the things not copied (the underlying Check with a Status field). When the stock code was run with the race detector enabled this highly-relevant-to-the-test-scenario field was found to be racy. Changes: a) update the existing Clone method to include the Check field b) copy-on-write when those fields need to change rather than incrementally updating them in place. This made the observed behavior occur slightly less often. (2) If anything about how the runLocal method for node-local alias check logic was ever flawed, there was no fallback option. Those checks are purely edge-triggered and failure to properly notice a single edge transition would leave the alias check incorrect until the next flap of the aliased check. The change was to introduce a fallback timer to act as a control loop to double check the alias check matches the aliased check every minute (borrowing the duration from the non-local alias check logic body). This made the observed behavior eventually go away when it did occur. (3) Originally I thought there were two main actions involved in the data race: A. The act of adding the original check (from disk recovery) and its first health evaluation. B. The act of the HTTP API requests coming in and resetting the local state when re-registering the same services and checks. It took awhile for me to realize that there's a third action at work: C. The goroutines associated with the original check and the later checks. The actual sequence of actions that was causing the bad behavior was that the API actions result in the original check to be removed and re-added _without waiting for the original goroutine to terminate_. This means for brief windows of time during check definition edits there are two goroutines that can be sending updates for the alias check status. In extremely unlikely scenarios the original goroutine sees the aliased check start up in `critical` before being removed but does not get the notification about the nearly immediate update of that check to `passing`. This is interlaced wit the new goroutine coming up, initializing its base case to `passing` from the current state and then listening for new notifications of edge triggers. If the original goroutine "finishes" its update, it then commits one more write into the local state of `critical` and exits leaving the alias check no longer reflecting the underlying check. The correction here is to enforce that the old goroutines must terminate before spawning the new one for alias checks.
2019-05-24 18:36:56 +00:00
defer a2.Shutdown()
a = nil
// reregister during standup; we use an adjustable timing to try and force a race
sleepDur := time.Duration(idx+1) * 500 * time.Millisecond
time.Sleep(sleepDur)
logf(t, a2, "re-registering checks and services after a delay of %v", sleepDur)
for i := 0; i < 20; i++ { // RACE RACE RACE!
registerServicesAndChecks(t, a2)
time.Sleep(50 * time.Millisecond)
}
time.Sleep(1 * time.Second)
retryUntilCheckState(t, a2, "service:ping", api.HealthPassing)
logf(t, a2, "giving the alias check a chance to notice...")
time.Sleep(5 * time.Second)
retryUntilCheckState(t, a2, "service:ping-sidecar-proxy", api.HealthPassing)
}
for i := 0; i < 20; i++ {
name := "restart-" + strconv.Itoa(i)
ok := t.Run(name, func(t *testing.T) {
restartOnce(i, t)
})
require.True(t, ok, name+" failed")
}
}
func TestAgent_Alias_AddRemove(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
2018-06-30 13:38:56 +00:00
t.Parallel()
a := NewTestAgent(t, "")
2018-06-30 13:38:56 +00:00
defer a.Shutdown()
cid := structs.NewCheckID("aliashealth", nil)
2018-06-30 13:38:56 +00:00
testutil.RunStep(t, "add check", func(t *testing.T) {
health := &structs.HealthCheck{
Node: "foo",
CheckID: cid.ID,
Name: "Alias health check",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
AliasService: "foo",
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
require.NoError(t, err)
sChk := requireCheckExists(t, a, cid.ID)
require.Equal(t, api.HealthCritical, sChk.Status)
chkImpl, ok := a.checkAliases[cid]
require.True(t, ok, "missing aliashealth check")
require.Equal(t, "", chkImpl.RPCReq.Token)
cs := a.State.CheckState(cid)
require.NotNil(t, cs)
require.Equal(t, "", cs.Token)
})
testutil.RunStep(t, "remove check", func(t *testing.T) {
require.NoError(t, a.RemoveCheck(cid, false))
requireCheckMissing(t, a, cid.ID)
requireCheckMissingMap(t, a.checkAliases, cid.ID)
})
}
func TestAgent_AddCheck_Alias_setToken(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "aliashealth",
Name: "Alias health check",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
AliasService: "foo",
2018-06-30 13:38:56 +00:00
}
err := a.AddCheck(health, chk, false, "foo", ConfigSourceLocal)
require.NoError(t, err)
2018-06-30 13:38:56 +00:00
cs := a.State.CheckState(structs.NewCheckID("aliashealth", nil))
require.NotNil(t, cs)
require.Equal(t, "foo", cs.Token)
chkImpl, ok := a.checkAliases[structs.NewCheckID("aliashealth", nil)]
require.True(t, ok, "missing aliashealth check")
require.Equal(t, "foo", chkImpl.RPCReq.Token)
}
func TestAgent_AddCheck_Alias_userToken(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
acl_token = "hello"
`)
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "aliashealth",
Name: "Alias health check",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
AliasService: "foo",
2018-06-30 13:38:56 +00:00
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
require.NoError(t, err)
2018-06-30 13:38:56 +00:00
cs := a.State.CheckState(structs.NewCheckID("aliashealth", nil))
require.NotNil(t, cs)
require.Equal(t, "", cs.Token) // State token should still be empty
chkImpl, ok := a.checkAliases[structs.NewCheckID("aliashealth", nil)]
require.True(t, ok, "missing aliashealth check")
require.Equal(t, "hello", chkImpl.RPCReq.Token) // Check should use the token
}
func TestAgent_AddCheck_Alias_userAndSetToken(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
acl_token = "hello"
`)
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "aliashealth",
Name: "Alias health check",
Status: api.HealthCritical,
2018-06-30 13:38:56 +00:00
}
chk := &structs.CheckType{
AliasService: "foo",
}
err := a.AddCheck(health, chk, false, "goodbye", ConfigSourceLocal)
require.NoError(t, err)
cs := a.State.CheckState(structs.NewCheckID("aliashealth", nil))
require.NotNil(t, cs)
require.Equal(t, "goodbye", cs.Token)
chkImpl, ok := a.checkAliases[structs.NewCheckID("aliashealth", nil)]
require.True(t, ok, "missing aliashealth check")
require.Equal(t, "goodbye", chkImpl.RPCReq.Token)
2018-06-30 13:38:56 +00:00
}
func TestAgent_RemoveCheck(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
enable_script_checks = true
`)
defer a.Shutdown()
// Remove check that doesn't exist
if err := a.RemoveCheck(structs.NewCheckID("mem", nil), false); err != nil {
t.Fatalf("err: %v", err)
}
// Remove without an ID
if err := a.RemoveCheck(structs.NewCheckID("", nil), false); err == nil {
t.Fatalf("should have errored")
}
health := &structs.HealthCheck{
Node: "foo",
CheckID: "mem",
Name: "memory util",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
ScriptArgs: []string{"exit", "0"},
Interval: 15 * time.Second,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
// Remove check
if err := a.RemoveCheck(structs.NewCheckID("mem", nil), false); err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a check mapping
requireCheckMissing(t, a, "mem")
// Ensure a TTL is setup
requireCheckMissingMap(t, a.checkMonitors, "mem")
}
func TestAgent_HTTPCheck_TLSSkipVerify(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
handler := http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
fmt.Fprintln(w, "GOOD")
})
server := httptest.NewTLSServer(handler)
defer server.Close()
a := NewTestAgent(t, "")
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "tls",
Name: "tls check",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
HTTP: server.URL,
Interval: 20 * time.Millisecond,
TLSSkipVerify: true,
}
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
retry.Run(t, func(r *retry.R) {
status := getCheck(a, "tls")
if status.Status != api.HealthPassing {
r.Fatalf("bad: %v", status.Status)
}
if !strings.Contains(status.Output, "GOOD") {
r.Fatalf("bad: %v", status.Output)
}
})
}
func TestAgent_HTTPCheck_EnableAgentTLSForChecks(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
run := func(t *testing.T, ca string) {
a := StartTestAgent(t, TestAgent{
UseHTTPS: true,
HCL: `
enable_agent_tls_for_checks = true
verify_incoming = true
server_name = "consul.test"
key_file = "../test/client_certs/server.key"
cert_file = "../test/client_certs/server.crt"
` + ca,
})
defer a.Shutdown()
health := &structs.HealthCheck{
Node: "foo",
CheckID: "tls",
Name: "tls check",
Status: api.HealthCritical,
}
addr, err := firstAddr(a.Agent.apiServers, "https")
require.NoError(t, err)
url := fmt.Sprintf("https://%s/v1/agent/self", addr.String())
chk := &structs.CheckType{
HTTP: url,
Interval: 20 * time.Millisecond,
}
err = a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
retry.Run(t, func(r *retry.R) {
status := getCheck(a, "tls")
if status.Status != api.HealthPassing {
r.Fatalf("bad: %v", status.Status)
}
if !strings.Contains(status.Output, "200 OK") {
r.Fatalf("bad: %v", status.Output)
}
})
}
// We need to test both methods of passing the CA info to ensure that
// we propagate all the fields correctly. All the other fields are
// covered by the HCL in the test run function.
tests := []struct {
desc string
config string
}{
{"ca_file", `ca_file = "../test/client_certs/rootca.crt"`},
{"ca_path", `ca_path = "../test/client_certs/path"`},
}
for _, tt := range tests {
t.Run(tt.desc, func(t *testing.T) {
run(t, tt.config)
})
}
}
func TestAgent_updateTTLCheck(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
checkBufSize := 100
health := &structs.HealthCheck{
Node: "foo",
CheckID: "mem",
Name: "memory util",
Status: api.HealthCritical,
}
chk := &structs.CheckType{
TTL: 15 * time.Second,
OutputMaxSize: checkBufSize,
}
// Add check and update it.
err := a.AddCheck(health, chk, false, "", ConfigSourceLocal)
if err != nil {
t.Fatalf("err: %v", err)
}
if err := a.updateTTLCheck(structs.NewCheckID("mem", nil), api.HealthPassing, "foo"); err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a check mapping.
status := getCheck(a, "mem")
if status.Status != api.HealthPassing {
t.Fatalf("bad: %v", status)
}
if status.Output != "foo" {
t.Fatalf("bad: %v", status)
}
if err := a.updateTTLCheck(structs.NewCheckID("mem", nil), api.HealthCritical, strings.Repeat("--bad-- ", 5*checkBufSize)); err != nil {
t.Fatalf("err: %v", err)
}
// Ensure we have a check mapping.
status = getCheck(a, "mem")
if status.Status != api.HealthCritical {
t.Fatalf("bad: %v", status)
}
if len(status.Output) > checkBufSize*2 {
t.Fatalf("bad: %v", len(status.Output))
}
}
func TestAgent_PersistService(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_PersistService(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_PersistService(t, "enable_central_service_config = true")
})
}
func testAgent_PersistService(t *testing.T, extraHCL string) {
t.Helper()
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
cfg := `
server = false
bootstrap = false
` + extraHCL
a := StartTestAgent(t, TestAgent{HCL: cfg})
defer a.Shutdown()
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
file := filepath.Join(a.Config.DataDir, servicesDir, structs.NewServiceID(svc.ID, nil).StringHashSHA256())
// Check is not persisted unless requested
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
if _, err := os.Stat(file); err == nil {
t.Fatalf("should not persist")
}
// Persists to file if requested
if err := a.addServiceFromSource(svc, nil, true, "mytoken", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
if _, err := os.Stat(file); err != nil {
t.Fatalf("err: %s", err)
}
expected, err := json.Marshal(persistedService{
Token: "mytoken",
Service: svc,
Source: "local",
})
if err != nil {
t.Fatalf("err: %s", err)
}
content, err := os.ReadFile(file)
if err != nil {
t.Fatalf("err: %s", err)
}
if !bytes.Equal(expected, content) {
t.Fatalf("bad: %s", string(content))
}
// Updates service definition on disk
svc.Port = 8001
if err := a.addServiceFromSource(svc, nil, true, "mytoken", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
expected, err = json.Marshal(persistedService{
Token: "mytoken",
Service: svc,
Source: "local",
})
if err != nil {
t.Fatalf("err: %s", err)
}
content, err = os.ReadFile(file)
if err != nil {
t.Fatalf("err: %s", err)
}
if !bytes.Equal(expected, content) {
t.Fatalf("bad: %s", string(content))
}
a.Shutdown()
// Should load it back during later start
a2 := StartTestAgent(t, TestAgent{HCL: cfg, DataDir: a.DataDir})
defer a2.Shutdown()
restored := a2.State.ServiceState(structs.NewServiceID(svc.ID, nil))
2017-08-28 12:17:13 +00:00
if restored == nil {
t.Fatalf("service %q missing", svc.ID)
}
2017-08-28 12:17:13 +00:00
if got, want := restored.Token, "mytoken"; got != want {
t.Fatalf("got token %q want %q", got, want)
}
2017-08-28 12:17:14 +00:00
if got, want := restored.Service.Port, 8001; got != want {
2017-08-28 12:17:13 +00:00
t.Fatalf("got port %d want %d", got, want)
}
}
func TestAgent_persistedService_compat(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_persistedService_compat(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_persistedService_compat(t, "enable_central_service_config = true")
})
}
func testAgent_persistedService_compat(t *testing.T, extraHCL string) {
t.Helper()
// Tests backwards compatibility of persisted services from pre-0.5.1
a := NewTestAgent(t, extraHCL)
defer a.Shutdown()
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
TaggedAddresses: map[string]structs.ServiceAddress{},
Weights: &structs.Weights{Passing: 1, Warning: 1},
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
}
// Encode the NodeService directly. This is what previous versions
// would serialize to the file (without the wrapper)
encoded, err := json.Marshal(svc)
if err != nil {
t.Fatalf("err: %s", err)
}
// Write the content to the file
file := filepath.Join(a.Config.DataDir, servicesDir, structs.NewServiceID(svc.ID, nil).StringHashSHA256())
if err := os.MkdirAll(filepath.Dir(file), 0700); err != nil {
t.Fatalf("err: %s", err)
}
if err := os.WriteFile(file, encoded, 0600); err != nil {
t.Fatalf("err: %s", err)
}
// Load the services
if err := a.loadServices(a.Config, nil); err != nil {
t.Fatalf("err: %s", err)
}
// Ensure the service was restored
result := requireServiceExists(t, a, "redis")
require.Equal(t, svc, result)
}
func TestAgent_persistedService_compat_hash(t *testing.T) {
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_persistedService_compat_hash(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_persistedService_compat_hash(t, "enable_central_service_config = true")
})
}
func testAgent_persistedService_compat_hash(t *testing.T, extraHCL string) {
t.Helper()
// Tests backwards compatibility of persisted services from pre-0.5.1
a := NewTestAgent(t, extraHCL)
defer a.Shutdown()
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
TaggedAddresses: map[string]structs.ServiceAddress{},
Weights: &structs.Weights{Passing: 1, Warning: 1},
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
}
// Encode the NodeService directly. This is what previous versions
// would serialize to the file (without the wrapper)
encoded, err := json.Marshal(svc)
if err != nil {
t.Fatalf("err: %s", err)
}
// Write the content to the file using the old md5 based path
file := filepath.Join(a.Config.DataDir, servicesDir, stringHashMD5(svc.ID))
if err := os.MkdirAll(filepath.Dir(file), 0700); err != nil {
t.Fatalf("err: %s", err)
}
if err := os.WriteFile(file, encoded, 0600); err != nil {
t.Fatalf("err: %s", err)
}
wrapped := persistedServiceConfig{
ServiceID: "redis",
Defaults: &structs.ServiceConfigResponse{},
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
}
encodedConfig, err := json.Marshal(wrapped)
if err != nil {
t.Fatalf("err: %s", err)
}
configFile := filepath.Join(a.Config.DataDir, serviceConfigDir, stringHashMD5(svc.ID))
if err := os.MkdirAll(filepath.Dir(configFile), 0700); err != nil {
t.Fatalf("err: %s", err)
}
if err := os.WriteFile(configFile, encodedConfig, 0600); err != nil {
t.Fatalf("err: %s", err)
}
// Load the services
if err := a.loadServices(a.Config, nil); err != nil {
t.Fatalf("err: %s", err)
}
// Ensure the service was restored
result := requireServiceExists(t, a, "redis")
require.Equal(t, svc, result)
}
// Exists for backwards compatibility testing
func stringHashMD5(s string) string {
return fmt.Sprintf("%x", md5.Sum([]byte(s)))
}
func TestAgent_PurgeService(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_PurgeService(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_PurgeService(t, "enable_central_service_config = true")
})
}
func testAgent_PurgeService(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, extraHCL)
defer a.Shutdown()
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
file := filepath.Join(a.Config.DataDir, servicesDir, structs.NewServiceID(svc.ID, nil).StringHashSHA256())
if err := a.addServiceFromSource(svc, nil, true, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Exists
if _, err := os.Stat(file); err != nil {
t.Fatalf("err: %s", err)
}
// Not removed
if err := a.removeService(structs.NewServiceID(svc.ID, nil), false); err != nil {
t.Fatalf("err: %s", err)
}
if _, err := os.Stat(file); err != nil {
t.Fatalf("err: %s", err)
}
// Re-add the service
if err := a.addServiceFromSource(svc, nil, true, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Removed
if err := a.removeService(structs.NewServiceID(svc.ID, nil), true); err != nil {
t.Fatalf("err: %s", err)
}
if _, err := os.Stat(file); !os.IsNotExist(err) {
t.Fatalf("bad: %#v", err)
}
}
func TestAgent_PurgeServiceOnDuplicate(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_PurgeServiceOnDuplicate(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_PurgeServiceOnDuplicate(t, "enable_central_service_config = true")
})
}
func testAgent_PurgeServiceOnDuplicate(t *testing.T, extraHCL string) {
t.Helper()
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
cfg := `
server = false
bootstrap = false
` + extraHCL
a := StartTestAgent(t, TestAgent{HCL: cfg})
defer a.Shutdown()
svc1 := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
// First persist the service
require.NoError(t, a.addServiceFromSource(svc1, nil, true, "", ConfigSourceLocal))
a.Shutdown()
// Try bringing the agent back up with the service already
// existing in the config
a2 := StartTestAgent(t, TestAgent{Name: "Agent2", HCL: cfg + `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
service = {
id = "redis"
name = "redis"
tags = ["bar"]
port = 9000
}
`, DataDir: a.DataDir})
defer a2.Shutdown()
sid := svc1.CompoundServiceID()
file := filepath.Join(a.Config.DataDir, servicesDir, sid.StringHashSHA256())
_, err := os.Stat(file)
require.Error(t, err, "should have removed persisted service")
result := requireServiceExists(t, a, "redis")
require.NotEqual(t, []string{"bar"}, result.Tags)
require.NotEqual(t, 9000, result.Port)
}
func TestAgent_PersistCheck(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
cfg := `
server = false
bootstrap = false
enable_script_checks = true
`
a := StartTestAgent(t, TestAgent{HCL: cfg})
defer a.Shutdown()
check := &structs.HealthCheck{
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
Node: a.config.NodeName,
CheckID: "mem",
Name: "memory check",
Status: api.HealthPassing,
}
chkType := &structs.CheckType{
ScriptArgs: []string{"/bin/true"},
Interval: 10 * time.Second,
}
cid := check.CompoundCheckID()
file := filepath.Join(a.Config.DataDir, checksDir, cid.StringHashSHA256())
// Not persisted if not requested
require.NoError(t, a.AddCheck(check, chkType, false, "", ConfigSourceLocal))
_, err := os.Stat(file)
require.Error(t, err, "should not persist")
// Should persist if requested
require.NoError(t, a.AddCheck(check, chkType, true, "mytoken", ConfigSourceLocal))
_, err = os.Stat(file)
require.NoError(t, err)
expected, err := json.Marshal(persistedCheck{
Check: check,
ChkType: chkType,
Token: "mytoken",
Source: "local",
})
require.NoError(t, err)
content, err := os.ReadFile(file)
require.NoError(t, err)
require.Equal(t, expected, content)
// Updates the check definition on disk
check.Name = "mem1"
require.NoError(t, a.AddCheck(check, chkType, true, "mytoken", ConfigSourceLocal))
expected, err = json.Marshal(persistedCheck{
Check: check,
ChkType: chkType,
Token: "mytoken",
Source: "local",
})
require.NoError(t, err)
content, err = os.ReadFile(file)
require.NoError(t, err)
require.Equal(t, expected, content)
a.Shutdown()
// Should load it back during later start
a2 := StartTestAgent(t, TestAgent{Name: "Agent2", HCL: cfg, DataDir: a.DataDir})
defer a2.Shutdown()
result := requireCheckExists(t, a2, check.CheckID)
require.Equal(t, api.HealthCritical, result.Status)
require.Equal(t, "mem1", result.Name)
// Should have restored the monitor
requireCheckExistsMap(t, a2.checkMonitors, check.CheckID)
chkState := a2.State.CheckState(structs.NewCheckID(check.CheckID, nil))
require.NotNil(t, chkState)
require.Equal(t, "mytoken", chkState.Token)
}
func TestAgent_PurgeCheck(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
check := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "mem",
Name: "memory check",
Status: api.HealthPassing,
}
file := filepath.Join(a.Config.DataDir, checksDir, checkIDHash(check.CheckID))
if err := a.AddCheck(check, nil, true, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Not removed
if err := a.RemoveCheck(structs.NewCheckID(check.CheckID, nil), false); err != nil {
t.Fatalf("err: %s", err)
}
if _, err := os.Stat(file); err != nil {
t.Fatalf("err: %s", err)
}
// Removed
if err := a.RemoveCheck(structs.NewCheckID(check.CheckID, nil), true); err != nil {
t.Fatalf("err: %s", err)
}
if _, err := os.Stat(file); !os.IsNotExist(err) {
t.Fatalf("bad: %#v", err)
}
}
func TestAgent_PurgeCheckOnDuplicate(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
nodeID := NodeID()
a := StartTestAgent(t, TestAgent{
HCL: `
node_id = "` + nodeID + `"
node_name = "Node ` + nodeID + `"
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
server = false
bootstrap = false
enable_script_checks = true
`})
defer a.Shutdown()
check1 := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "mem",
Name: "memory check",
Status: api.HealthPassing,
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
}
// First persist the check
if err := a.AddCheck(check1, nil, true, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
a.Shutdown()
// Start again with the check registered in config
a2 := StartTestAgent(t, TestAgent{
Name: "Agent2",
DataDir: a.DataDir,
HCL: `
node_id = "` + nodeID + `"
node_name = "Node ` + nodeID + `"
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
server = false
bootstrap = false
enable_script_checks = true
check = {
id = "mem"
name = "memory check"
notes = "my cool notes"
args = ["/bin/check-redis.py"]
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
interval = "30s"
timeout = "5s"
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
}
`})
defer a2.Shutdown()
cid := check1.CompoundCheckID()
file := filepath.Join(a.DataDir, checksDir, cid.StringHashSHA256())
if _, err := os.Stat(file); err == nil {
t.Fatalf("should have removed persisted check")
}
result := requireCheckExists(t, a2, "mem")
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
expected := &structs.HealthCheck{
Node: a2.Config.NodeName,
CheckID: "mem",
Name: "memory check",
Status: api.HealthCritical,
Notes: "my cool notes",
Interval: "30s",
Timeout: "5s",
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
}
require.Equal(t, expected, result)
}
func TestAgent_DeregisterPersistedSidecarAfterRestart(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
nodeID := NodeID()
a := StartTestAgent(t, TestAgent{
HCL: `
node_id = "` + nodeID + `"
node_name = "Node ` + nodeID + `"
server = false
bootstrap = false
enable_central_service_config = false
`})
defer a.Shutdown()
srv := &structs.NodeService{
ID: "svc",
Service: "svc",
Weights: &structs.Weights{
Passing: 2,
Warning: 1,
},
Tags: []string{"tag2"},
Port: 8200,
EnterpriseMeta: *structs.DefaultEnterpriseMetaInDefaultPartition(),
Connect: structs.ServiceConnect{
SidecarService: &structs.ServiceDefinition{},
},
}
connectSrv, _, _, err := sidecarServiceFromNodeService(srv, "")
require.NoError(t, err)
// First persist the check
err = a.addServiceFromSource(srv, nil, true, "", ConfigSourceLocal)
require.NoError(t, err)
err = a.addServiceFromSource(connectSrv, nil, true, "", ConfigSourceLocal)
require.NoError(t, err)
// check both services were registered
require.NotNil(t, a.State.Service(srv.CompoundServiceID()))
require.NotNil(t, a.State.Service(connectSrv.CompoundServiceID()))
a.Shutdown()
// Start again with the check registered in config
a2 := StartTestAgent(t, TestAgent{
Name: "Agent2",
DataDir: a.DataDir,
HCL: `
node_id = "` + nodeID + `"
node_name = "Node ` + nodeID + `"
server = false
bootstrap = false
enable_central_service_config = false
`})
defer a2.Shutdown()
// check both services were restored
require.NotNil(t, a2.State.Service(srv.CompoundServiceID()))
require.NotNil(t, a2.State.Service(connectSrv.CompoundServiceID()))
err = a2.RemoveService(srv.CompoundServiceID())
require.NoError(t, err)
// check both services were deregistered
require.Nil(t, a2.State.Service(srv.CompoundServiceID()))
require.Nil(t, a2.State.Service(connectSrv.CompoundServiceID()))
}
func TestAgent_loadChecks_token(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
check = {
id = "rabbitmq"
name = "rabbitmq"
token = "abc123"
ttl = "10s"
}
`)
defer a.Shutdown()
requireCheckExists(t, a, "rabbitmq")
require.Equal(t, "abc123", a.State.CheckToken(structs.NewCheckID("rabbitmq", nil)))
}
func TestAgent_unloadChecks(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// First register a service
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Register a check
check1 := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "service:redis",
Name: "redischeck",
Status: api.HealthPassing,
ServiceID: "redis",
ServiceName: "redis",
}
if err := a.AddCheck(check1, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %s", err)
}
requireCheckExists(t, a, check1.CheckID)
// Unload all of the checks
if err := a.unloadChecks(); err != nil {
t.Fatalf("err: %s", err)
}
// Make sure it was unloaded
requireCheckMissing(t, a, check1.CheckID)
}
func TestAgent_loadServices_token(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_token(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_token(t, "enable_central_service_config = true")
})
}
func testAgent_loadServices_token(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
service = {
id = "rabbitmq"
name = "rabbitmq"
port = 5672
token = "abc123"
}
`+extraHCL)
defer a.Shutdown()
requireServiceExists(t, a, "rabbitmq")
if token := a.State.ServiceToken(structs.NewServiceID("rabbitmq", nil)); token != "abc123" {
t.Fatalf("bad: %s", token)
}
}
func TestAgent_loadServices_sidecar(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecar(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecar(t, "enable_central_service_config = true")
})
}
func testAgent_loadServices_sidecar(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
service = {
id = "rabbitmq"
name = "rabbitmq"
port = 5672
token = "abc123"
connect = {
sidecar_service {}
}
}
`+extraHCL)
defer a.Shutdown()
svc := requireServiceExists(t, a, "rabbitmq")
if token := a.State.ServiceToken(structs.NewServiceID("rabbitmq", nil)); token != "abc123" {
t.Fatalf("bad: %s", token)
}
sidecarSvc := requireServiceExists(t, a, "rabbitmq-sidecar-proxy")
if token := a.State.ServiceToken(structs.NewServiceID("rabbitmq-sidecar-proxy", nil)); token != "abc123" {
t.Fatalf("bad: %s", token)
}
// Verify default checks have been added
wantChecks := sidecarDefaultChecks(sidecarSvc.ID, sidecarSvc.Address, sidecarSvc.Proxy.LocalServiceAddress, sidecarSvc.Port)
gotChecks := a.State.ChecksForService(sidecarSvc.CompoundServiceID(), true)
gotChkNames := make(map[string]types.CheckID)
for _, check := range gotChecks {
requireCheckExists(t, a, check.CheckID)
gotChkNames[check.Name] = check.CheckID
}
for _, check := range wantChecks {
chkName := check.Name
require.NotNil(t, gotChkNames[chkName])
}
// Sanity check rabbitmq service should NOT have sidecar info in state since
// it's done it's job and should be a registration syntax sugar only.
assert.Nil(t, svc.Connect.SidecarService)
}
func TestAgent_loadServices_sidecarSeparateToken(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecarSeparateToken(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecarSeparateToken(t, "enable_central_service_config = true")
})
}
func testAgent_loadServices_sidecarSeparateToken(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
service = {
id = "rabbitmq"
name = "rabbitmq"
port = 5672
token = "abc123"
connect = {
sidecar_service {
token = "789xyz"
}
}
}
`+extraHCL)
defer a.Shutdown()
requireServiceExists(t, a, "rabbitmq")
if token := a.State.ServiceToken(structs.NewServiceID("rabbitmq", nil)); token != "abc123" {
t.Fatalf("bad: %s", token)
}
requireServiceExists(t, a, "rabbitmq-sidecar-proxy")
if token := a.State.ServiceToken(structs.NewServiceID("rabbitmq-sidecar-proxy", nil)); token != "789xyz" {
t.Fatalf("bad: %s", token)
}
}
func TestAgent_loadServices_sidecarInheritMeta(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecarInheritMeta(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecarInheritMeta(t, "enable_central_service_config = true")
})
}
func testAgent_loadServices_sidecarInheritMeta(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
service = {
id = "rabbitmq"
name = "rabbitmq"
port = 5672
tags = ["a", "b"],
meta = {
environment = "prod"
}
connect = {
sidecar_service {
}
}
}
`+extraHCL)
defer a.Shutdown()
svc := requireServiceExists(t, a, "rabbitmq")
require.Len(t, svc.Tags, 2)
require.Len(t, svc.Meta, 1)
sidecar := requireServiceExists(t, a, "rabbitmq-sidecar-proxy")
require.ElementsMatch(t, svc.Tags, sidecar.Tags)
require.Len(t, sidecar.Meta, 1)
meta, ok := sidecar.Meta["environment"]
require.True(t, ok, "missing sidecar service meta")
require.Equal(t, "prod", meta)
}
func TestAgent_loadServices_sidecarOverrideMeta(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecarOverrideMeta(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_loadServices_sidecarOverrideMeta(t, "enable_central_service_config = true")
})
}
func testAgent_loadServices_sidecarOverrideMeta(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, `
service = {
id = "rabbitmq"
name = "rabbitmq"
port = 5672
tags = ["a", "b"],
meta = {
environment = "prod"
}
connect = {
sidecar_service {
tags = ["foo"],
meta = {
environment = "qa"
}
}
}
}
`+extraHCL)
defer a.Shutdown()
svc := requireServiceExists(t, a, "rabbitmq")
require.Len(t, svc.Tags, 2)
require.Len(t, svc.Meta, 1)
sidecar := requireServiceExists(t, a, "rabbitmq-sidecar-proxy")
require.Len(t, sidecar.Tags, 1)
require.Equal(t, "foo", sidecar.Tags[0])
require.Len(t, sidecar.Meta, 1)
meta, ok := sidecar.Meta["environment"]
require.True(t, ok, "missing sidecar service meta")
require.Equal(t, "qa", meta)
}
func TestAgent_unloadServices(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_unloadServices(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_unloadServices(t, "enable_central_service_config = true")
})
}
func testAgent_unloadServices(t *testing.T, extraHCL string) {
t.Helper()
a := NewTestAgent(t, extraHCL)
defer a.Shutdown()
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
// Register the service
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
requireServiceExists(t, a, svc.ID)
// Unload all services
if err := a.unloadServices(); err != nil {
t.Fatalf("err: %s", err)
}
if len(a.State.Services(structs.WildcardEnterpriseMetaInDefaultPartition())) != 0 {
t.Fatalf("should have unloaded services")
}
}
func TestAgent_Service_MaintenanceMode(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
// Register the service
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
sid := structs.NewServiceID("redis", nil)
// Enter maintenance mode for the service
if err := a.EnableServiceMaintenance(sid, "broken", "mytoken"); err != nil {
t.Fatalf("err: %s", err)
}
// Make sure the critical health check was added
checkID := serviceMaintCheckID(sid)
check := a.State.Check(checkID)
if check == nil {
2015-01-15 19:26:14 +00:00
t.Fatalf("should have registered critical maintenance check")
}
// Check that the token was used to register the check
2017-08-28 12:17:13 +00:00
if token := a.State.CheckToken(checkID); token != "mytoken" {
t.Fatalf("expected 'mytoken', got: '%s'", token)
}
// Ensure the reason was set in notes
if check.Notes != "broken" {
t.Fatalf("bad: %#v", check)
}
// Leave maintenance mode
if err := a.DisableServiceMaintenance(sid); err != nil {
t.Fatalf("err: %s", err)
}
// Ensure the check was deregistered
if found := a.State.Check(checkID); found != nil {
2015-01-15 19:26:14 +00:00
t.Fatalf("should have deregistered maintenance check")
}
// Enter service maintenance mode without providing a reason
if err := a.EnableServiceMaintenance(sid, "", ""); err != nil {
t.Fatalf("err: %s", err)
}
// Ensure the check was registered with the default notes
check = a.State.Check(checkID)
if check == nil {
t.Fatalf("should have registered critical check")
}
if check.Notes != defaultServiceMaintReason {
t.Fatalf("bad: %#v", check)
}
2015-01-15 19:26:14 +00:00
}
func TestAgent_Service_Reap(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
// t.Parallel() // timing test. no parallel
a := StartTestAgent(t, TestAgent{Overrides: `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
check_reap_interval = "50ms"
check_deregister_interval_min = "0s"
`})
defer a.Shutdown()
2018-09-04 11:31:51 +00:00
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
chkTypes := []*structs.CheckType{
{
Status: api.HealthPassing,
TTL: 25 * time.Millisecond,
DeregisterCriticalServiceAfter: 200 * time.Millisecond,
},
}
// Register the service.
if err := a.addServiceFromSource(svc, chkTypes, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Make sure it's there and there's no critical check yet.
requireServiceExists(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()), 0, "should not have critical checks")
// Wait for the check TTL to fail but before the check is reaped.
time.Sleep(100 * time.Millisecond)
requireServiceExists(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(nil), 1, "should have 1 critical check")
// Pass the TTL.
if err := a.updateTTLCheck(structs.NewCheckID("service:redis", nil), api.HealthPassing, "foo"); err != nil {
t.Fatalf("err: %v", err)
}
requireServiceExists(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()), 0, "should not have critical checks")
// Wait for the check TTL to fail again.
time.Sleep(100 * time.Millisecond)
requireServiceExists(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()), 1, "should have 1 critical check")
// Wait for the reap.
time.Sleep(400 * time.Millisecond)
requireServiceMissing(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()), 0, "should not have critical checks")
}
func TestAgent_Service_NoReap(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
// t.Parallel() // timing test. no parallel
a := StartTestAgent(t, TestAgent{Overrides: `
New config parser, HCL support, multiple bind addrs (#3480) * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt
2017-09-25 18:40:42 +00:00
check_reap_interval = "50ms"
check_deregister_interval_min = "0s"
`})
defer a.Shutdown()
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
chkTypes := []*structs.CheckType{
{
Status: api.HealthPassing,
TTL: 25 * time.Millisecond,
},
}
// Register the service.
if err := a.addServiceFromSource(svc, chkTypes, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Make sure it's there and there's no critical check yet.
requireServiceExists(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()), 0)
// Wait for the check TTL to fail.
time.Sleep(200 * time.Millisecond)
requireServiceExists(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()), 1)
// Wait a while and make sure it doesn't reap.
time.Sleep(200 * time.Millisecond)
requireServiceExists(t, a, "redis")
require.Len(t, a.State.CriticalCheckStates(structs.WildcardEnterpriseMetaInDefaultPartition()), 1)
}
func TestAgent_AddService_restoresSnapshot(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_AddService_restoresSnapshot(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_AddService_restoresSnapshot(t, "enable_central_service_config = true")
})
}
func testAgent_AddService_restoresSnapshot(t *testing.T, extraHCL string) {
a := NewTestAgent(t, extraHCL)
defer a.Shutdown()
// First register a service
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
require.NoError(t, a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal))
// Register a check
check1 := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "service:redis",
Name: "redischeck",
Status: api.HealthPassing,
ServiceID: "redis",
ServiceName: "redis",
}
require.NoError(t, a.AddCheck(check1, nil, false, "", ConfigSourceLocal))
// Re-registering the service preserves the state of the check
chkTypes := []*structs.CheckType{{TTL: 30 * time.Second}}
require.NoError(t, a.addServiceFromSource(svc, chkTypes, false, "", ConfigSourceLocal))
check := requireCheckExists(t, a, "service:redis")
require.Equal(t, api.HealthPassing, check.Status)
}
func TestAgent_AddCheck_restoresSnapshot(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// First register a service
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Register a check
check1 := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "service:redis",
Name: "redischeck",
Status: api.HealthPassing,
ServiceID: "redis",
ServiceName: "redis",
}
if err := a.AddCheck(check1, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %s", err)
}
// Re-registering the check preserves its state
check1.Status = ""
if err := a.AddCheck(check1, &structs.CheckType{TTL: 30 * time.Second}, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %s", err)
}
check := requireCheckExists(t, a, "service:redis")
if check.Status != api.HealthPassing {
t.Fatalf("bad: %s", check.Status)
}
}
2015-01-15 19:26:14 +00:00
func TestAgent_NodeMaintenanceMode(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
2015-01-15 19:26:14 +00:00
// Enter maintenance mode for the node
a.EnableNodeMaintenance("broken", "mytoken")
2015-01-15 19:26:14 +00:00
// Make sure the critical health check was added
check := requireCheckExists(t, a, structs.NodeMaint)
2015-01-15 19:26:14 +00:00
// Check that the token was used to register the check
if token := a.State.CheckToken(structs.NodeMaintCheckID); token != "mytoken" {
t.Fatalf("expected 'mytoken', got: '%s'", token)
}
// Ensure the reason was set in notes
if check.Notes != "broken" {
t.Fatalf("bad: %#v", check)
}
2015-01-15 19:26:14 +00:00
// Leave maintenance mode
a.DisableNodeMaintenance()
2015-01-15 19:26:14 +00:00
// Ensure the check was deregistered
requireCheckMissing(t, a, structs.NodeMaint)
// Enter maintenance mode without passing a reason
a.EnableNodeMaintenance("", "")
// Make sure the check was registered with the default note
check = requireCheckExists(t, a, structs.NodeMaint)
if check.Notes != defaultNodeMaintReason {
t.Fatalf("bad: %#v", check)
}
}
func TestAgent_checkStateSnapshot(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// First register a service
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Register a check
check1 := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "service:redis",
Name: "redischeck",
Status: api.HealthPassing,
ServiceID: "redis",
ServiceName: "redis",
}
if err := a.AddCheck(check1, nil, true, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %s", err)
}
// Snapshot the state
snap := a.snapshotCheckState()
// Unload all of the checks
if err := a.unloadChecks(); err != nil {
t.Fatalf("err: %s", err)
}
// Reload the checks and restore the snapshot.
if err := a.loadChecks(a.Config, snap); err != nil {
t.Fatalf("err: %s", err)
}
// Search for the check
out := requireCheckExists(t, a, check1.CheckID)
// Make sure state was restored
if out.Status != api.HealthPassing {
t.Fatalf("should have restored check state")
}
}
func TestAgent_checkStateSnapshot_backcompat(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// First register a service
svc := &structs.NodeService{
ID: "redis",
Service: "redis",
Tags: []string{"foo"},
Port: 8000,
}
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %v", err)
}
// Register a check
check1 := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "service:redis",
Name: "redischeck",
Status: api.HealthPassing,
ServiceID: "redis",
ServiceName: "redis",
}
if err := a.AddCheck(check1, nil, true, "", ConfigSourceLocal); err != nil {
t.Fatalf("err: %s", err)
}
// Snapshot the state
snap := a.snapshotCheckState()
// Unload all of the checks
if err := a.unloadChecks(); err != nil {
t.Fatalf("err: %s", err)
}
// Mutate the path to look like the old md5 checksum
dir := filepath.Join(a.config.DataDir, checksDir)
new_path := filepath.Join(dir, check1.CompoundCheckID().StringHashSHA256())
old_path := filepath.Join(dir, check1.CompoundCheckID().StringHashMD5())
if err := os.Rename(new_path, old_path); err != nil {
t.Fatalf("err: %s", err)
}
// Reload the checks and restore the snapshot.
if err := a.loadChecks(a.Config, snap); err != nil {
t.Fatalf("err: %s", err)
}
// Search for the check
out := requireCheckExists(t, a, check1.CheckID)
// Make sure state was restored
if out.Status != api.HealthPassing {
t.Fatalf("should have restored check state")
}
}
func TestAgent_loadChecks_checkFails(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// Persist a health check with an invalid service ID
check := &structs.HealthCheck{
Node: a.Config.NodeName,
CheckID: "service:redis",
Name: "redischeck",
Status: api.HealthPassing,
ServiceID: "nope",
}
if err := a.persistCheck(check, nil, ConfigSourceLocal); err != nil {
t.Fatalf("err: %s", err)
}
// Check to make sure the check was persisted
checkHash := checkIDHash(check.CheckID)
checkPath := filepath.Join(a.Config.DataDir, checksDir, checkHash)
if _, err := os.Stat(checkPath); err != nil {
t.Fatalf("err: %s", err)
}
// Try loading the checks from the persisted files
if err := a.loadChecks(a.Config, nil); err != nil {
t.Fatalf("err: %s", err)
}
// Ensure the erroneous check was purged
if _, err := os.Stat(checkPath); err == nil {
t.Fatalf("should have purged check")
}
}
func TestAgent_persistCheckState(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
cid := structs.NewCheckID("check1", nil)
// Create the TTL check to persist
check := &checks.CheckTTL{
CheckID: cid,
TTL: 10 * time.Minute,
}
// Persist some check state for the check
err := a.persistCheckState(check, api.HealthCritical, "nope")
if err != nil {
t.Fatalf("err: %s", err)
}
// Check the persisted file exists and has the content
file := filepath.Join(a.Config.DataDir, checkStateDir, cid.StringHashSHA256())
buf, err := os.ReadFile(file)
if err != nil {
t.Fatalf("err: %s", err)
}
// Decode the state
var p persistedCheckState
if err := json.Unmarshal(buf, &p); err != nil {
t.Fatalf("err: %s", err)
}
// Check the fields
if p.CheckID != cid.ID {
t.Fatalf("bad: %#v", p)
}
if p.Output != "nope" {
t.Fatalf("bad: %#v", p)
}
if p.Status != api.HealthCritical {
t.Fatalf("bad: %#v", p)
}
// Check the expiration time was set
if p.Expires < time.Now().Unix() {
t.Fatalf("bad: %#v", p)
}
}
func TestAgent_loadCheckState(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// Create a check whose state will expire immediately
check := &checks.CheckTTL{
CheckID: structs.NewCheckID("check1", nil),
TTL: 0,
}
// Persist the check state
err := a.persistCheckState(check, api.HealthPassing, "yup")
if err != nil {
t.Fatalf("err: %s", err)
}
// Try to load the state
health := &structs.HealthCheck{
CheckID: "check1",
Status: api.HealthCritical,
}
if err := a.loadCheckState(health); err != nil {
t.Fatalf("err: %s", err)
}
// Should not have restored the status due to expiration
if health.Status != api.HealthCritical {
t.Fatalf("bad: %#v", health)
}
if health.Output != "" {
t.Fatalf("bad: %#v", health)
}
// Should have purged the state
file := filepath.Join(a.Config.DataDir, checksDir, structs.NewCheckID("check1", nil).StringHashSHA256())
if _, err := os.Stat(file); !os.IsNotExist(err) {
t.Fatalf("should have purged state")
}
// Set a TTL which will not expire before we check it
check.TTL = time.Minute
err = a.persistCheckState(check, api.HealthPassing, "yup")
if err != nil {
t.Fatalf("err: %s", err)
}
// Try to load
if err := a.loadCheckState(health); err != nil {
t.Fatalf("err: %s", err)
}
// Should have restored
if health.Status != api.HealthPassing {
t.Fatalf("bad: %#v", health)
}
if health.Output != "yup" {
t.Fatalf("bad: %#v", health)
}
}
func TestAgent_purgeCheckState(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
cid := structs.NewCheckID("check1", nil)
// No error if the state does not exist
if err := a.purgeCheckState(cid); err != nil {
t.Fatalf("err: %s", err)
}
// Persist some state to the data dir
check := &checks.CheckTTL{
CheckID: cid,
TTL: time.Minute,
}
err := a.persistCheckState(check, api.HealthPassing, "yup")
if err != nil {
t.Fatalf("err: %s", err)
}
// Purge the check state
if err := a.purgeCheckState(cid); err != nil {
t.Fatalf("err: %s", err)
}
// Removed the file
file := filepath.Join(a.Config.DataDir, checkStateDir, cid.StringHashSHA256())
if _, err := os.Stat(file); !os.IsNotExist(err) {
t.Fatalf("should have removed file")
}
}
func TestAgent_GetCoordinate(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
a := NewTestAgent(t, ``)
defer a.Shutdown()
coords, err := a.GetLANCoordinate()
require.NoError(t, err)
expected := lib.CoordinateSet{
"": &coordinate.Coordinate{
Error: 1.5,
Height: 1e-05,
Vec: []float64{0, 0, 0, 0, 0, 0, 0, 0},
},
}
require.Equal(t, expected, coords)
}
func TestAgent_reloadWatches(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
// Normal watch with http addr set, should succeed
newConf := *a.config
newConf.Watches = []map[string]interface{}{
{
"type": "key",
"key": "asdf",
"args": []interface{}{"ls"},
},
}
if err := a.reloadWatches(&newConf); err != nil {
t.Fatalf("bad: %s", err)
}
// Should fail to reload with connect watches
newConf.Watches = []map[string]interface{}{
{
"type": "connect_roots",
"key": "asdf",
"args": []interface{}{"ls"},
},
}
if err := a.reloadWatches(&newConf); err == nil || !strings.Contains(err.Error(), "not allowed in agent config") {
t.Fatalf("bad: %s", err)
}
// Should still succeed with only HTTPS addresses
newConf.HTTPSAddrs = newConf.HTTPAddrs
newConf.HTTPAddrs = make([]net.Addr, 0)
newConf.Watches = []map[string]interface{}{
{
"type": "key",
"key": "asdf",
"args": []interface{}{"ls"},
},
}
if err := a.reloadWatches(&newConf); err != nil {
t.Fatalf("bad: %s", err)
}
// Should fail to reload with no http or https addrs
newConf.HTTPSAddrs = make([]net.Addr, 0)
newConf.Watches = []map[string]interface{}{
{
"type": "key",
"key": "asdf",
"args": []interface{}{"ls"},
},
}
if err := a.reloadWatches(&newConf); err == nil || !strings.Contains(err.Error(), "watch plans require an HTTP or HTTPS endpoint") {
t.Fatalf("bad: %s", err)
}
}
func TestAgent_reloadWatchesHTTPS(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := TestAgent{UseHTTPS: true}
if err := a.Start(t); err != nil {
t.Fatal(err)
}
defer a.Shutdown()
// Normal watch with http addr set, should succeed
newConf := *a.config
newConf.Watches = []map[string]interface{}{
{
"type": "key",
"key": "asdf",
"args": []interface{}{"ls"},
},
}
if err := a.reloadWatches(&newConf); err != nil {
t.Fatalf("bad: %s", err)
}
}
func TestAgent_SecurityChecks(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
hcl := `
enable_script_checks = true
`
a := &TestAgent{Name: t.Name(), HCL: hcl}
defer a.Shutdown()
data := make([]byte, 0, 8192)
buf := &syncBuffer{b: bytes.NewBuffer(data)}
a.LogOutput = buf
assert.NoError(t, a.Start(t))
assert.Contains(t, buf.String(), "using enable-script-checks without ACLs and without allow_write_http_from is DANGEROUS")
}
type syncBuffer struct {
lock sync.RWMutex
b *bytes.Buffer
}
func (b *syncBuffer) Write(data []byte) (int, error) {
b.lock.Lock()
defer b.lock.Unlock()
return b.b.Write(data)
}
func (b *syncBuffer) String() string {
b.lock.Lock()
defer b.lock.Unlock()
return b.b.String()
}
func TestAgent_ReloadConfigOutgoingRPCConfig(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
dataDir := testutil.TempDir(t, "agent") // we manage the data dir
hcl := `
data_dir = "` + dataDir + `"
verify_outgoing = true
ca_file = "../test/ca/root.cer"
cert_file = "../test/key/ourdomain.cer"
key_file = "../test/key/ourdomain.key"
verify_server_hostname = false
`
a := NewTestAgent(t, hcl)
defer a.Shutdown()
tlsConf := a.tlsConfigurator.OutgoingRPCConfig()
2022-04-14 20:55:10 +00:00
require.True(t, tlsConf.InsecureSkipVerify)
2022-04-14 20:55:10 +00:00
expectedCaPoolByFile := getExpectedCaPoolByFile(t)
assertDeepEqual(t, expectedCaPoolByFile, tlsConf.RootCAs, cmpCertPool)
assertDeepEqual(t, expectedCaPoolByFile, tlsConf.ClientCAs, cmpCertPool)
hcl = `
data_dir = "` + dataDir + `"
verify_outgoing = true
ca_path = "../test/ca_path"
cert_file = "../test/key/ourdomain.cer"
key_file = "../test/key/ourdomain.key"
verify_server_hostname = true
`
c := TestConfig(testutil.Logger(t), config.FileSource{Name: t.Name(), Format: "hcl", Data: hcl})
require.NoError(t, a.reloadConfigInternal(c))
tlsConf = a.tlsConfigurator.OutgoingRPCConfig()
2022-04-14 20:55:10 +00:00
require.False(t, tlsConf.InsecureSkipVerify)
2022-04-14 20:55:10 +00:00
expectedCaPoolByDir := getExpectedCaPoolByDir(t)
assertDeepEqual(t, expectedCaPoolByDir, tlsConf.RootCAs, cmpCertPool)
assertDeepEqual(t, expectedCaPoolByDir, tlsConf.ClientCAs, cmpCertPool)
}
func TestAgent_ReloadConfigAndKeepChecksStatus(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Run("normal", func(t *testing.T) {
t.Parallel()
testAgent_ReloadConfigAndKeepChecksStatus(t, "enable_central_service_config = false")
})
t.Run("service manager", func(t *testing.T) {
t.Parallel()
testAgent_ReloadConfigAndKeepChecksStatus(t, "enable_central_service_config = true")
})
}
func testAgent_ReloadConfigAndKeepChecksStatus(t *testing.T, extraHCL string) {
dataDir := testutil.TempDir(t, "agent") // we manage the data dir
hcl := `data_dir = "` + dataDir + `"
enable_local_script_checks=true
services=[{
name="webserver1",
check{id="check1", ttl="30s"}
}] ` + extraHCL
a := NewTestAgent(t, hcl)
defer a.Shutdown()
require.NoError(t, a.updateTTLCheck(structs.NewCheckID("check1", nil), api.HealthPassing, "testing agent reload"))
// Make sure check is passing before we reload.
gotChecks := a.State.Checks(nil)
require.Equal(t, 1, len(gotChecks), "Should have a check registered, but had %#v", gotChecks)
for id, check := range gotChecks {
require.Equal(t, "passing", check.Status, "check %q is wrong", id)
}
c := TestConfig(testutil.Logger(t), config.FileSource{Name: t.Name(), Format: "hcl", Data: hcl})
require.NoError(t, a.reloadConfigInternal(c))
// After reload, should be passing directly (no critical state)
for id, check := range a.State.Checks(nil) {
require.Equal(t, "passing", check.Status, "check %q is wrong", id)
}
}
func TestAgent_ReloadConfigIncomingRPCConfig(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
dataDir := testutil.TempDir(t, "agent") // we manage the data dir
hcl := `
data_dir = "` + dataDir + `"
verify_outgoing = true
ca_file = "../test/ca/root.cer"
cert_file = "../test/key/ourdomain.cer"
key_file = "../test/key/ourdomain.key"
verify_server_hostname = false
`
a := NewTestAgent(t, hcl)
defer a.Shutdown()
tlsConf := a.tlsConfigurator.IncomingRPCConfig()
require.NotNil(t, tlsConf.GetConfigForClient)
tlsConf, err := tlsConf.GetConfigForClient(nil)
require.NoError(t, err)
require.NotNil(t, tlsConf)
require.True(t, tlsConf.InsecureSkipVerify)
2022-04-14 20:55:10 +00:00
expectedCaPoolByFile := getExpectedCaPoolByFile(t)
assertDeepEqual(t, expectedCaPoolByFile, tlsConf.RootCAs, cmpCertPool)
assertDeepEqual(t, expectedCaPoolByFile, tlsConf.ClientCAs, cmpCertPool)
hcl = `
data_dir = "` + dataDir + `"
verify_outgoing = true
ca_path = "../test/ca_path"
cert_file = "../test/key/ourdomain.cer"
key_file = "../test/key/ourdomain.key"
verify_server_hostname = true
`
c := TestConfig(testutil.Logger(t), config.FileSource{Name: t.Name(), Format: "hcl", Data: hcl})
require.NoError(t, a.reloadConfigInternal(c))
tlsConf, err = tlsConf.GetConfigForClient(nil)
require.NoError(t, err)
require.False(t, tlsConf.InsecureSkipVerify)
2022-04-14 20:55:10 +00:00
expectedCaPoolByDir := getExpectedCaPoolByDir(t)
assertDeepEqual(t, expectedCaPoolByDir, tlsConf.RootCAs, cmpCertPool)
assertDeepEqual(t, expectedCaPoolByDir, tlsConf.ClientCAs, cmpCertPool)
}
func TestAgent_ReloadConfigTLSConfigFailure(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
dataDir := testutil.TempDir(t, "agent") // we manage the data dir
hcl := `
data_dir = "` + dataDir + `"
verify_outgoing = true
ca_file = "../test/ca/root.cer"
cert_file = "../test/key/ourdomain.cer"
key_file = "../test/key/ourdomain.key"
verify_server_hostname = false
`
a := NewTestAgent(t, hcl)
defer a.Shutdown()
tlsConf := a.tlsConfigurator.IncomingRPCConfig()
hcl = `
data_dir = "` + dataDir + `"
verify_incoming = true
`
c := TestConfig(testutil.Logger(t), config.FileSource{Name: t.Name(), Format: "hcl", Data: hcl})
require.Error(t, a.reloadConfigInternal(c))
tlsConf, err := tlsConf.GetConfigForClient(nil)
require.NoError(t, err)
require.Equal(t, tls.NoClientCert, tlsConf.ClientAuth)
2022-04-14 20:55:10 +00:00
expectedCaPoolByFile := getExpectedCaPoolByFile(t)
assertDeepEqual(t, expectedCaPoolByFile, tlsConf.RootCAs, cmpCertPool)
assertDeepEqual(t, expectedCaPoolByFile, tlsConf.ClientCAs, cmpCertPool)
}
func TestAgent_ReloadConfig_XDSUpdateRateLimit(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
cfg := fmt.Sprintf(`data_dir = %q`, testutil.TempDir(t, "agent"))
a := NewTestAgent(t, cfg)
defer a.Shutdown()
c := TestConfig(
testutil.Logger(t),
config.FileSource{
Name: t.Name(),
Format: "hcl",
Data: cfg + ` xds { update_max_per_second = 1000 }`,
},
)
require.NoError(t, a.reloadConfigInternal(c))
require.Equal(t, rate.Limit(1000), a.proxyConfig.UpdateRateLimit())
}
func TestAgent_consulConfig_AutoEncryptAllowTLS(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
dataDir := testutil.TempDir(t, "agent") // we manage the data dir
hcl := `
data_dir = "` + dataDir + `"
verify_incoming = true
ca_file = "../test/ca/root.cer"
cert_file = "../test/key/ourdomain.cer"
key_file = "../test/key/ourdomain.key"
auto_encrypt { allow_tls = true }
`
a := NewTestAgent(t, hcl)
defer a.Shutdown()
require.True(t, a.consulConfig().AutoEncryptAllowTLS)
}
func TestAgent_ReloadConfigRPCClientConfig(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
dataDir := testutil.TempDir(t, "agent") // we manage the data dir
hcl := `
data_dir = "` + dataDir + `"
server = false
bootstrap = false
`
a := NewTestAgent(t, hcl)
defaultRPCTimeout := 60 * time.Second
require.Equal(t, defaultRPCTimeout, a.baseDeps.ConnPool.RPCClientTimeout())
hcl = `
data_dir = "` + dataDir + `"
server = false
bootstrap = false
limits {
rpc_client_timeout = "2m"
}
`
c := TestConfig(testutil.Logger(t), config.FileSource{Name: t.Name(), Format: "hcl", Data: hcl})
require.NoError(t, a.reloadConfigInternal(c))
require.Equal(t, 2*time.Minute, a.baseDeps.ConnPool.RPCClientTimeout())
}
func TestAgent_consulConfig_RaftTrailingLogs(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
hcl := `
raft_trailing_logs = 812345
`
a := NewTestAgent(t, hcl)
defer a.Shutdown()
require.Equal(t, uint64(812345), a.consulConfig().RaftConfig.TrailingLogs)
}
func TestAgent_grpcInjectAddr(t *testing.T) {
tt := []struct {
name string
grpc string
ip string
port int
want string
}{
{
name: "localhost web svc",
grpc: "localhost:8080/web",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090/web",
},
{
name: "localhost no svc",
grpc: "localhost:8080",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090",
},
{
name: "ipv4 web svc",
grpc: "127.0.0.1:8080/web",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090/web",
},
{
name: "ipv4 no svc",
grpc: "127.0.0.1:8080",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090",
},
{
name: "ipv6 no svc",
grpc: "2001:db8:1f70::999:de8:7648:6e8:5000",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090",
},
{
name: "ipv6 web svc",
grpc: "2001:db8:1f70::999:de8:7648:6e8:5000/web",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090/web",
},
{
name: "zone ipv6 web svc",
grpc: "::FFFF:C0A8:1%1:5000/web",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090/web",
},
{
name: "ipv6 literal web svc",
grpc: "::FFFF:192.168.0.1:5000/web",
ip: "192.168.0.0",
port: 9090,
want: "192.168.0.0:9090/web",
},
{
name: "ipv6 injected into ipv6 url",
grpc: "2001:db8:1f70::999:de8:7648:6e8:5000",
ip: "::FFFF:C0A8:1",
port: 9090,
want: "::FFFF:C0A8:1:9090",
},
{
name: "ipv6 injected into ipv6 url with svc",
grpc: "2001:db8:1f70::999:de8:7648:6e8:5000/web",
ip: "::FFFF:C0A8:1",
port: 9090,
want: "::FFFF:C0A8:1:9090/web",
},
{
name: "ipv6 injected into ipv6 url with special",
grpc: "2001:db8:1f70::999:de8:7648:6e8:5000/service-$name:with@special:Chars",
ip: "::FFFF:C0A8:1",
port: 9090,
want: "::FFFF:C0A8:1:9090/service-$name:with@special:Chars",
},
}
for _, tt := range tt {
t.Run(tt.name, func(t *testing.T) {
got := grpcInjectAddr(tt.grpc, tt.ip, tt.port)
if got != tt.want {
t.Errorf("httpInjectAddr() got = %v, want %v", got, tt.want)
}
})
}
}
func TestAgent_httpInjectAddr(t *testing.T) {
tt := []struct {
name string
url string
ip string
port int
want string
}{
{
name: "localhost health",
url: "http://localhost:8080/health",
ip: "192.168.0.0",
port: 9090,
want: "http://192.168.0.0:9090/health",
},
{
name: "https localhost health",
url: "https://localhost:8080/health",
ip: "192.168.0.0",
port: 9090,
want: "https://192.168.0.0:9090/health",
},
{
name: "https ipv4 health",
url: "https://127.0.0.1:8080/health",
ip: "192.168.0.0",
port: 9090,
want: "https://192.168.0.0:9090/health",
},
{
name: "https ipv4 without path",
url: "https://127.0.0.1:8080",
ip: "192.168.0.0",
port: 9090,
want: "https://192.168.0.0:9090",
},
{
name: "https ipv6 health",
url: "https://[2001:db8:1f70::999:de8:7648:6e8]:5000/health",
ip: "192.168.0.0",
port: 9090,
want: "https://192.168.0.0:9090/health",
},
{
name: "https ipv6 with zone",
url: "https://[::FFFF:C0A8:1%1]:5000/health",
ip: "192.168.0.0",
port: 9090,
want: "https://192.168.0.0:9090/health",
},
{
name: "https ipv6 literal",
url: "https://[::FFFF:192.168.0.1]:5000/health",
ip: "192.168.0.0",
port: 9090,
want: "https://192.168.0.0:9090/health",
},
{
name: "https ipv6 without path",
url: "https://[2001:db8:1f70::999:de8:7648:6e8]:5000",
ip: "192.168.0.0",
port: 9090,
want: "https://192.168.0.0:9090",
},
{
name: "ipv6 injected into ipv6 url",
url: "https://[2001:db8:1f70::999:de8:7648:6e8]:5000",
ip: "::FFFF:C0A8:1",
port: 9090,
want: "https://[::FFFF:C0A8:1]:9090",
},
{
name: "ipv6 with brackets injected into ipv6 url",
url: "https://[2001:db8:1f70::999:de8:7648:6e8]:5000",
ip: "[::FFFF:C0A8:1]",
port: 9090,
want: "https://[::FFFF:C0A8:1]:9090",
},
{
name: "short domain health",
url: "http://i.co:8080/health",
ip: "192.168.0.0",
port: 9090,
want: "http://192.168.0.0:9090/health",
},
{
name: "nested url in query",
url: "http://my.corp.com:8080/health?from=http://google.com:8080",
ip: "192.168.0.0",
port: 9090,
want: "http://192.168.0.0:9090/health?from=http://google.com:8080",
},
}
for _, tt := range tt {
t.Run(tt.name, func(t *testing.T) {
got := httpInjectAddr(tt.url, tt.ip, tt.port)
if got != tt.want {
t.Errorf("httpInjectAddr() got = %v, want %v", got, tt.want)
}
})
}
}
func TestDefaultIfEmpty(t *testing.T) {
require.Equal(t, "", defaultIfEmpty("", ""))
require.Equal(t, "foo", defaultIfEmpty("", "foo"))
require.Equal(t, "bar", defaultIfEmpty("bar", "foo"))
require.Equal(t, "bar", defaultIfEmpty("bar", ""))
}
func TestConfigSourceFromName(t *testing.T) {
cases := []struct {
in string
expect configSource
bad bool
}{
{in: "local", expect: ConfigSourceLocal},
{in: "remote", expect: ConfigSourceRemote},
{in: "", expect: ConfigSourceLocal},
{in: "LOCAL", bad: true},
{in: "REMOTE", bad: true},
{in: "garbage", bad: true},
{in: " ", bad: true},
}
for _, tc := range cases {
tc := tc
t.Run(tc.in, func(t *testing.T) {
got, ok := ConfigSourceFromName(tc.in)
if tc.bad {
require.False(t, ok)
require.Empty(t, got)
} else {
require.True(t, ok)
require.Equal(t, tc.expect, got)
}
})
}
}
func TestAgent_RerouteExistingHTTPChecks(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
// Register a service without a ProxyAddr
svc := &structs.NodeService{
ID: "web",
Service: "web",
Address: "localhost",
Port: 8080,
}
chks := []*structs.CheckType{
{
CheckID: "http",
HTTP: "http://localhost:8080/mypath?query",
Interval: 20 * time.Millisecond,
TLSSkipVerify: true,
},
{
CheckID: "grpc",
GRPC: "localhost:8080/myservice",
Interval: 20 * time.Millisecond,
TLSSkipVerify: true,
},
}
if err := a.addServiceFromSource(svc, chks, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("failed to add svc: %v", err)
}
// Register a proxy and expose HTTP checks.
// This should trigger setting ProxyHTTP and ProxyGRPC in the checks.
proxy := &structs.NodeService{
Kind: "connect-proxy",
ID: "web-proxy",
Service: "web-proxy",
Address: "localhost",
Port: 21500,
Proxy: structs.ConnectProxyConfig{
DestinationServiceName: "web",
DestinationServiceID: "web",
LocalServiceAddress: "localhost",
LocalServicePort: 8080,
MeshGateway: structs.MeshGatewayConfig{},
Expose: structs.ExposeConfig{
Checks: true,
},
},
}
if err := a.addServiceFromSource(proxy, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("failed to add svc: %v", err)
}
retry.Run(t, func(r *retry.R) {
chks := a.ServiceHTTPBasedChecks(structs.NewServiceID("web", nil))
require.Equal(r, chks[0].ProxyHTTP, "http://localhost:21500/mypath?query")
})
retry.Run(t, func(r *retry.R) {
hc := a.State.Check(structs.NewCheckID("http", nil))
require.Equal(r, hc.ExposedPort, 21500)
})
retry.Run(t, func(r *retry.R) {
chks := a.ServiceHTTPBasedChecks(structs.NewServiceID("web", nil))
// GRPC check will be at a later index than HTTP check because of the fetching order in ServiceHTTPBasedChecks.
// Note that this relies on listener ports auto-incrementing in a.listenerPortLocked.
require.Equal(r, chks[1].ProxyGRPC, "localhost:21501/myservice")
})
retry.Run(t, func(r *retry.R) {
hc := a.State.Check(structs.NewCheckID("grpc", nil))
require.Equal(r, hc.ExposedPort, 21501)
})
// Re-register a proxy and disable exposing HTTP checks.
// This should trigger resetting ProxyHTTP and ProxyGRPC to empty strings
// and reset saved exposed ports in the agent's state.
proxy = &structs.NodeService{
Kind: "connect-proxy",
ID: "web-proxy",
Service: "web-proxy",
Address: "localhost",
Port: 21500,
Proxy: structs.ConnectProxyConfig{
DestinationServiceName: "web",
DestinationServiceID: "web",
LocalServiceAddress: "localhost",
LocalServicePort: 8080,
MeshGateway: structs.MeshGatewayConfig{},
Expose: structs.ExposeConfig{
Checks: false,
},
},
}
if err := a.addServiceFromSource(proxy, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("failed to add svc: %v", err)
}
retry.Run(t, func(r *retry.R) {
chks := a.ServiceHTTPBasedChecks(structs.NewServiceID("web", nil))
require.Empty(r, chks[0].ProxyHTTP, "ProxyHTTP addr was not reset")
})
retry.Run(t, func(r *retry.R) {
hc := a.State.Check(structs.NewCheckID("http", nil))
require.Equal(r, hc.ExposedPort, 0)
})
retry.Run(t, func(r *retry.R) {
chks := a.ServiceHTTPBasedChecks(structs.NewServiceID("web", nil))
// Will be at a later index than HTTP check because of the fetching order in ServiceHTTPBasedChecks.
require.Empty(r, chks[1].ProxyGRPC, "ProxyGRPC addr was not reset")
})
retry.Run(t, func(r *retry.R) {
hc := a.State.Check(structs.NewCheckID("grpc", nil))
require.Equal(r, hc.ExposedPort, 0)
})
}
func TestAgent_RerouteNewHTTPChecks(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
a := NewTestAgent(t, "")
defer a.Shutdown()
testrpc.WaitForTestAgent(t, a.RPC, "dc1")
// Register a service without a ProxyAddr
svc := &structs.NodeService{
ID: "web",
Service: "web",
Address: "localhost",
Port: 8080,
}
if err := a.addServiceFromSource(svc, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("failed to add svc: %v", err)
}
// Register a proxy and expose HTTP checks
proxy := &structs.NodeService{
Kind: "connect-proxy",
ID: "web-proxy",
Service: "web-proxy",
Address: "localhost",
Port: 21500,
Proxy: structs.ConnectProxyConfig{
DestinationServiceName: "web",
DestinationServiceID: "web",
LocalServiceAddress: "localhost",
LocalServicePort: 8080,
MeshGateway: structs.MeshGatewayConfig{},
Expose: structs.ExposeConfig{
Checks: true,
},
},
}
if err := a.addServiceFromSource(proxy, nil, false, "", ConfigSourceLocal); err != nil {
t.Fatalf("failed to add svc: %v", err)
}
checks := []*structs.HealthCheck{
{
CheckID: "http",
Name: "http",
ServiceID: "web",
Status: api.HealthCritical,
},
{
CheckID: "grpc",
Name: "grpc",
ServiceID: "web",
Status: api.HealthCritical,
},
}
chkTypes := []*structs.CheckType{
{
CheckID: "http",
HTTP: "http://localhost:8080/mypath?query",
Interval: 20 * time.Millisecond,
TLSSkipVerify: true,
},
{
CheckID: "grpc",
GRPC: "localhost:8080/myservice",
Interval: 20 * time.Millisecond,
TLSSkipVerify: true,
},
}
// ProxyGRPC and ProxyHTTP should be set when creating check
// since proxy.expose.checks is enabled on the proxy
if err := a.AddCheck(checks[0], chkTypes[0], false, "", ConfigSourceLocal); err != nil {
t.Fatalf("failed to add check: %v", err)
}
if err := a.AddCheck(checks[1], chkTypes[1], false, "", ConfigSourceLocal); err != nil {
t.Fatalf("failed to add check: %v", err)
}
retry.Run(t, func(r *retry.R) {
chks := a.ServiceHTTPBasedChecks(structs.NewServiceID("web", nil))
require.Equal(r, chks[0].ProxyHTTP, "http://localhost:21500/mypath?query")
})
retry.Run(t, func(r *retry.R) {
hc := a.State.Check(structs.NewCheckID("http", nil))
require.Equal(r, hc.ExposedPort, 21500)
})
retry.Run(t, func(r *retry.R) {
chks := a.ServiceHTTPBasedChecks(structs.NewServiceID("web", nil))
// GRPC check will be at a later index than HTTP check because of the fetching order in ServiceHTTPBasedChecks.
require.Equal(r, chks[1].ProxyGRPC, "localhost:21501/myservice")
})
retry.Run(t, func(r *retry.R) {
hc := a.State.Check(structs.NewCheckID("grpc", nil))
require.Equal(r, hc.ExposedPort, 21501)
})
}
func TestAgentCache_serviceInConfigFile_initialFetchErrors_Issue6521(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
// Ensure that initial failures to fetch the discovery chain via the agent
// cache using the notify API for a service with no config entries
// correctly recovers when those RPCs resume working. The key here is that
// the lack of config entries guarantees that the RPC will come back with a
// synthetic index of 1.
//
// The bug in the Cache.notifyBlockingQuery used to incorrectly "fix" the
// index for the next query from 0 to 1 for all queries, when it should
// have not done so for queries that errored.
a1 := StartTestAgent(t, TestAgent{Name: "Agent1"})
defer a1.Shutdown()
testrpc.WaitForLeader(t, a1.RPC, "dc1")
a2 := StartTestAgent(t, TestAgent{Name: "Agent2", HCL: `
server = false
bootstrap = false
services {
name = "echo-client"
port = 8080
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "echo"
local_bind_port = 9191
}
}
}
}
}
services {
name = "echo"
port = 9090
connect {
sidecar_service {}
}
}
`})
defer a2.Shutdown()
// Starting a client agent disconnected from a server with services.
ctx, cancel := context.WithCancel(context.Background())
defer cancel()
ch := make(chan cache.UpdateEvent, 1)
require.NoError(t, a2.cache.Notify(ctx, cachetype.CompiledDiscoveryChainName, &structs.DiscoveryChainRequest{
Datacenter: "dc1",
Name: "echo",
EvaluateInDatacenter: "dc1",
EvaluateInNamespace: "default",
}, "foo", ch))
{ // The first event is an error because we are not joined yet.
evt := <-ch
require.Equal(t, "foo", evt.CorrelationID)
require.Nil(t, evt.Result)
require.Error(t, evt.Err)
require.Equal(t, evt.Err, structs.ErrNoServers)
}
t.Logf("joining client to server")
// Now connect to server
_, err := a1.JoinLAN([]string{
fmt.Sprintf("127.0.0.1:%d", a2.Config.SerfPortLAN),
}, nil)
require.NoError(t, err)
t.Logf("joined client to server")
deadlineCh := time.After(10 * time.Second)
start := time.Now()
for {
select {
case evt := <-ch:
// We may receive several notifications of an error until we get the
// first successful reply.
require.Equal(t, "foo", evt.CorrelationID)
if evt.Err == nil {
require.NoError(t, evt.Err)
require.NotNil(t, evt.Result)
t.Logf("took %s to get first success", time.Since(start))
return
}
t.Logf("saw error: %v", evt.Err)
case <-deadlineCh:
t.Fatal("did not get notified successfully")
}
}
}
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
// This is a mirror of a similar test in agent/consul/server_test.go
//
// TODO(rb): implement something similar to this as a full containerized test suite with proper
// isolation so requests can't "cheat" and bypass the mesh gateways
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
func TestAgent_JoinWAN_viaMeshGateway(t *testing.T) {
// if this test is failing because of expired certificates
// use the procedure in test/CA-GENERATION.md
if testing.Short() {
t.Skip("too slow for testing.Short")
}
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
t.Parallel()
port := freeport.GetOne(t)
gwAddr := ipaddr.FormatAddressPort("127.0.0.1", port)
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
// Due to some ordering, we'll have to manually configure these ports in
// advance.
secondaryRPCPorts := freeport.GetN(t, 2)
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
a1 := StartTestAgent(t, TestAgent{Name: "bob", HCL: `
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
domain = "consul"
node_name = "bob"
datacenter = "dc1"
primary_datacenter = "dc1"
# tls
ca_file = "../test/hostname/CertAuth.crt"
cert_file = "../test/hostname/Bob.crt"
key_file = "../test/hostname/Bob.key"
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
# wanfed
connect {
enabled = true
enable_mesh_gateway_wan_federation = true
}
`})
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
defer a1.Shutdown()
testrpc.WaitForTestAgent(t, a1.RPC, "dc1")
// We'll use the same gateway for all datacenters since it doesn't care.
var (
rpcAddr1 = ipaddr.FormatAddressPort("127.0.0.1", a1.Config.ServerPort)
rpcAddr2 = ipaddr.FormatAddressPort("127.0.0.1", secondaryRPCPorts[0])
rpcAddr3 = ipaddr.FormatAddressPort("127.0.0.1", secondaryRPCPorts[1])
)
var p tcpproxy.Proxy
p.AddSNIRoute(gwAddr, "bob.server.dc1.consul", tcpproxy.To(rpcAddr1))
p.AddSNIRoute(gwAddr, "server.dc1.consul", tcpproxy.To(rpcAddr1))
p.AddSNIRoute(gwAddr, "betty.server.dc2.consul", tcpproxy.To(rpcAddr2))
p.AddSNIRoute(gwAddr, "server.dc2.consul", tcpproxy.To(rpcAddr2))
p.AddSNIRoute(gwAddr, "bonnie.server.dc3.consul", tcpproxy.To(rpcAddr3))
p.AddSNIRoute(gwAddr, "server.dc3.consul", tcpproxy.To(rpcAddr3))
p.AddStopACMESearch(gwAddr)
require.NoError(t, p.Start())
defer func() {
p.Close()
p.Wait()
}()
t.Logf("routing %s => %s", "{bob.,}server.dc1.consul", rpcAddr1)
t.Logf("routing %s => %s", "{betty.,}server.dc2.consul", rpcAddr2)
t.Logf("routing %s => %s", "{bonnie.,}server.dc3.consul", rpcAddr3)
// Register this into the agent in dc1.
{
args := &structs.ServiceDefinition{
Kind: structs.ServiceKindMeshGateway,
ID: "mesh-gateway",
Name: "mesh-gateway",
Meta: map[string]string{structs.MetaWANFederationKey: "1"},
Port: port,
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
}
req, err := http.NewRequest("PUT", "/v1/agent/service/register", jsonReader(args))
require.NoError(t, err)
obj, err := a1.srv.AgentRegisterService(nil, req)
require.NoError(t, err)
require.Nil(t, obj)
}
waitForFederationState := func(t *testing.T, a *TestAgent, dc string) {
retry.Run(t, func(r *retry.R) {
req, err := http.NewRequest("GET", "/v1/internal/federation-state/"+dc, nil)
require.NoError(r, err)
resp := httptest.NewRecorder()
obj, err := a.srv.FederationStateGet(resp, req)
require.NoError(r, err)
require.NotNil(r, obj)
out, ok := obj.(structs.FederationStateResponse)
require.True(r, ok)
require.NotNil(r, out.State)
require.Len(r, out.State.MeshGateways, 1)
})
}
// Wait until at least catalog AE and federation state AE fire.
waitForFederationState(t, a1, "dc1")
retry.Run(t, func(r *retry.R) {
require.NotEmpty(r, a1.PickRandomMeshGatewaySuitableForDialing("dc1"))
})
a2 := StartTestAgent(t, TestAgent{Name: "betty", HCL: `
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
domain = "consul"
node_name = "betty"
datacenter = "dc2"
primary_datacenter = "dc1"
# tls
ca_file = "../test/hostname/CertAuth.crt"
cert_file = "../test/hostname/Betty.crt"
key_file = "../test/hostname/Betty.key"
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ports {
server = ` + strconv.Itoa(secondaryRPCPorts[0]) + `
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
}
# wanfed
primary_gateways = ["` + gwAddr + `"]
retry_interval_wan = "250ms"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
connect {
enabled = true
enable_mesh_gateway_wan_federation = true
}
`})
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
defer a2.Shutdown()
testrpc.WaitForTestAgent(t, a2.RPC, "dc2")
a3 := StartTestAgent(t, TestAgent{Name: "bonnie", HCL: `
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
domain = "consul"
node_name = "bonnie"
datacenter = "dc3"
primary_datacenter = "dc1"
# tls
ca_file = "../test/hostname/CertAuth.crt"
cert_file = "../test/hostname/Bonnie.crt"
key_file = "../test/hostname/Bonnie.key"
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ports {
server = ` + strconv.Itoa(secondaryRPCPorts[1]) + `
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
}
# wanfed
primary_gateways = ["` + gwAddr + `"]
retry_interval_wan = "250ms"
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
connect {
enabled = true
enable_mesh_gateway_wan_federation = true
}
`})
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
defer a3.Shutdown()
testrpc.WaitForTestAgent(t, a3.RPC, "dc3")
// The primary_gateways config setting should cause automatic mesh join.
// Assert that the secondaries have joined the primary.
findPrimary := func(r *retry.R, a *TestAgent) *serf.Member {
var primary *serf.Member
for _, m := range a.WANMembers() {
if m.Tags["dc"] == "dc1" {
require.Nil(r, primary, "already found one node in dc1")
primary = &m
}
}
require.NotNil(r, primary)
return primary
}
retry.Run(t, func(r *retry.R) {
p2, p3 := findPrimary(r, a2), findPrimary(r, a3)
require.Equal(r, "bob.dc1", p2.Name)
require.Equal(r, "bob.dc1", p3.Name)
})
testrpc.WaitForLeader(t, a2.RPC, "dc2")
testrpc.WaitForLeader(t, a3.RPC, "dc3")
// Now we can register this into the catalog in dc2 and dc3.
{
args := &structs.ServiceDefinition{
Kind: structs.ServiceKindMeshGateway,
ID: "mesh-gateway",
Name: "mesh-gateway",
Meta: map[string]string{structs.MetaWANFederationKey: "1"},
Port: port,
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
}
req, err := http.NewRequest("PUT", "/v1/agent/service/register", jsonReader(args))
require.NoError(t, err)
obj, err := a2.srv.AgentRegisterService(nil, req)
require.NoError(t, err)
require.Nil(t, obj)
}
{
args := &structs.ServiceDefinition{
Kind: structs.ServiceKindMeshGateway,
ID: "mesh-gateway",
Name: "mesh-gateway",
Meta: map[string]string{structs.MetaWANFederationKey: "1"},
Port: port,
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
}
req, err := http.NewRequest("PUT", "/v1/agent/service/register", jsonReader(args))
require.NoError(t, err)
obj, err := a3.srv.AgentRegisterService(nil, req)
require.NoError(t, err)
require.Nil(t, obj)
}
// Wait until federation state replication functions
waitForFederationState(t, a1, "dc1")
waitForFederationState(t, a1, "dc2")
waitForFederationState(t, a1, "dc3")
waitForFederationState(t, a2, "dc1")
waitForFederationState(t, a2, "dc2")
waitForFederationState(t, a2, "dc3")
waitForFederationState(t, a3, "dc1")
waitForFederationState(t, a3, "dc2")
waitForFederationState(t, a3, "dc3")
retry.Run(t, func(r *retry.R) {
require.NotEmpty(r, a1.PickRandomMeshGatewaySuitableForDialing("dc1"))
require.NotEmpty(r, a1.PickRandomMeshGatewaySuitableForDialing("dc2"))
require.NotEmpty(r, a1.PickRandomMeshGatewaySuitableForDialing("dc3"))
require.NotEmpty(r, a2.PickRandomMeshGatewaySuitableForDialing("dc1"))
require.NotEmpty(r, a2.PickRandomMeshGatewaySuitableForDialing("dc2"))
require.NotEmpty(r, a2.PickRandomMeshGatewaySuitableForDialing("dc3"))
require.NotEmpty(r, a3.PickRandomMeshGatewaySuitableForDialing("dc1"))
require.NotEmpty(r, a3.PickRandomMeshGatewaySuitableForDialing("dc2"))
require.NotEmpty(r, a3.PickRandomMeshGatewaySuitableForDialing("dc3"))
})
retry.Run(t, func(r *retry.R) {
if got, want := len(a1.WANMembers()), 3; got != want {
r.Fatalf("got %d WAN members want at least %d", got, want)
}
if got, want := len(a2.WANMembers()), 3; got != want {
r.Fatalf("got %d WAN members want at least %d", got, want)
}
if got, want := len(a3.WANMembers()), 3; got != want {
r.Fatalf("got %d WAN members want at least %d", got, want)
}
})
// Ensure we can do some trivial RPC in all directions.
//
// NOTE: we explicitly make streaming and non-streaming assertions here to
// verify both rpc and grpc codepaths.
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
agents := map[string]*TestAgent{"dc1": a1, "dc2": a2, "dc3": a3}
names := map[string]string{"dc1": "bob", "dc2": "betty", "dc3": "bonnie"}
for _, srcDC := range []string{"dc1", "dc2", "dc3"} {
a := agents[srcDC]
for _, dstDC := range []string{"dc1", "dc2", "dc3"} {
if srcDC == dstDC {
continue
}
t.Run(srcDC+" to "+dstDC, func(t *testing.T) {
t.Run("normal-rpc", func(t *testing.T) {
req, err := http.NewRequest("GET", "/v1/catalog/nodes?dc="+dstDC, nil)
require.NoError(t, err)
resp := httptest.NewRecorder()
obj, err := a.srv.CatalogNodes(resp, req)
require.NoError(t, err)
require.NotNil(t, obj)
nodes, ok := obj.(structs.Nodes)
require.True(t, ok)
require.Len(t, nodes, 1)
node := nodes[0]
require.Equal(t, dstDC, node.Datacenter)
require.Equal(t, names[dstDC], node.Node)
})
t.Run("streaming-grpc", func(t *testing.T) {
req, err := http.NewRequest("GET", "/v1/health/service/consul?cached&dc="+dstDC, nil)
require.NoError(t, err)
resp := httptest.NewRecorder()
obj, err := a.srv.HealthServiceNodes(resp, req)
require.NoError(t, err)
require.NotNil(t, obj)
csns, ok := obj.(structs.CheckServiceNodes)
require.True(t, ok)
require.Len(t, csns, 1)
csn := csns[0]
require.Equal(t, dstDC, csn.Node.Datacenter)
require.Equal(t, names[dstDC], csn.Node.Node)
})
wan federation via mesh gateways (#6884) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 20:59:02 +00:00
})
}
}
}
func TestAutoConfig_Integration(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
// eventually this test should really live with integration tests
// the goal here is to have one test server and another test client
// spin up both agents and allow the server to authorize the auto config
// request and then see the client joined. Finally we force a CA roots
// update and wait to see that the agents TLS certificate gets updated.
cfgDir := testutil.TempDir(t, "auto-config")
// write some test TLS certificates out to the cfg dir
cert, key, cacert, err := testTLSCertificates("server.dc1.consul")
require.NoError(t, err)
certFile := filepath.Join(cfgDir, "cert.pem")
caFile := filepath.Join(cfgDir, "cacert.pem")
keyFile := filepath.Join(cfgDir, "key.pem")
require.NoError(t, os.WriteFile(certFile, []byte(cert), 0600))
require.NoError(t, os.WriteFile(caFile, []byte(cacert), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(key), 0600))
// generate a gossip key
gossipKey := make([]byte, 32)
n, err := rand.Read(gossipKey)
require.NoError(t, err)
require.Equal(t, 32, n)
gossipKeyEncoded := base64.StdEncoding.EncodeToString(gossipKey)
// generate the JWT signing keys
pub, priv, err := oidcauthtest.GenerateKey()
require.NoError(t, err)
hclConfig := TestACLConfigWithParams(nil) + `
encrypt = "` + gossipKeyEncoded + `"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "` + caFile + `"
cert_file = "` + certFile + `"
key_file = "` + keyFile + `"
connect { enabled = true }
auto_config {
authorization {
enabled = true
static {
claim_mappings = {
consul_node_name = "node"
}
claim_assertions = [
"value.node == \"${node}\""
]
bound_issuer = "consul"
bound_audiences = [
"consul"
]
jwt_validation_pub_keys = ["` + strings.ReplaceAll(pub, "\n", "\\n") + `"]
}
}
}
`
srv := StartTestAgent(t, TestAgent{Name: "TestAgent-Server", HCL: hclConfig})
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
// sign a JWT token
now := time.Now()
token, err := oidcauthtest.SignJWT(priv, jwt.Claims{
Subject: "consul",
Issuer: "consul",
Audience: jwt.Audience{"consul"},
NotBefore: jwt.NewNumericDate(now.Add(-1 * time.Second)),
Expiry: jwt.NewNumericDate(now.Add(5 * time.Minute)),
}, map[string]interface{}{
"consul_node_name": "test-client",
})
require.NoError(t, err)
client := StartTestAgent(t, TestAgent{Name: "test-client",
Overrides: `
connect {
test_ca_leaf_root_change_spread = "1ns"
}
`,
HCL: `
bootstrap = false
server = false
ca_file = "` + caFile + `"
verify_outgoing = true
verify_server_hostname = true
node_name = "test-client"
ports {
server = ` + strconv.Itoa(srv.Config.RPCBindAddr.Port) + `
}
auto_config {
enabled = true
intro_token = "` + token + `"
server_addresses = ["` + srv.Config.RPCBindAddr.String() + `"]
}`,
})
defer client.Shutdown()
retry.Run(t, func(r *retry.R) {
require.NotNil(r, client.Agent.tlsConfigurator.Cert())
})
// when this is successful we managed to get the gossip key and serf addresses to bind to
// and then connect. Additionally we would have to have certificates or else the
// verify_incoming config on the server would not let it work.
testrpc.WaitForTestAgent(t, client.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
// spot check that we now have an ACL token
require.NotEmpty(t, client.tokens.AgentToken())
// grab the existing cert
cert1 := client.Agent.tlsConfigurator.Cert()
require.NotNil(t, cert1)
// force a roots rotation by updating the CA config
t.Logf("Forcing roots rotation on the server")
ca := connect.TestCA(t, nil)
req := &structs.CARequest{
Datacenter: "dc1",
WriteRequest: structs.WriteRequest{Token: TestDefaultInitialManagementToken},
Config: &structs.CAConfiguration{
Provider: "consul",
Config: map[string]interface{}{
"LeafCertTTL": "1h",
"PrivateKey": ca.SigningKey,
"RootCert": ca.RootCert,
"IntermediateCertTTL": "3h",
},
},
}
var reply interface{}
require.NoError(t, srv.RPC("ConnectCA.ConfigurationSet", &req, &reply))
// ensure that a new cert gets generated and pushed into the TLS configurator
retry.Run(t, func(r *retry.R) {
require.NotEqual(r, cert1, client.Agent.tlsConfigurator.Cert())
// check that the on disk certs match expectations
data, err := os.ReadFile(filepath.Join(client.DataDir, "auto-config.json"))
require.NoError(r, err)
rdr := strings.NewReader(string(data))
var resp pbautoconf.AutoConfigResponse
pbUnmarshaler := &jsonpb.Unmarshaler{
AllowUnknownFields: false,
}
require.NoError(r, pbUnmarshaler.Unmarshal(rdr, &resp), "data: %s", data)
actual, err := tls.X509KeyPair([]byte(resp.Certificate.CertPEM), []byte(resp.Certificate.PrivateKeyPEM))
require.NoError(r, err)
require.Equal(r, client.Agent.tlsConfigurator.Cert(), &actual)
})
}
func TestAgent_AutoEncrypt(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
// eventually this test should really live with integration tests
// the goal here is to have one test server and another test client
// spin up both agents and allow the server to authorize the auto encrypt
// request and then see the client get a TLS certificate
cfgDir := testutil.TempDir(t, "auto-encrypt")
// write some test TLS certificates out to the cfg dir
cert, key, cacert, err := testTLSCertificates("server.dc1.consul")
require.NoError(t, err)
certFile := filepath.Join(cfgDir, "cert.pem")
caFile := filepath.Join(cfgDir, "cacert.pem")
keyFile := filepath.Join(cfgDir, "key.pem")
require.NoError(t, os.WriteFile(certFile, []byte(cert), 0600))
require.NoError(t, os.WriteFile(caFile, []byte(cacert), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(key), 0600))
hclConfig := TestACLConfigWithParams(nil) + `
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "` + caFile + `"
cert_file = "` + certFile + `"
key_file = "` + keyFile + `"
connect { enabled = true }
auto_encrypt { allow_tls = true }
`
srv := StartTestAgent(t, TestAgent{Name: "test-server", HCL: hclConfig})
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
client := StartTestAgent(t, TestAgent{Name: "test-client", HCL: TestACLConfigWithParams(nil) + `
bootstrap = false
server = false
ca_file = "` + caFile + `"
verify_outgoing = true
verify_server_hostname = true
node_name = "test-client"
auto_encrypt {
tls = true
}
ports {
server = ` + strconv.Itoa(srv.Config.RPCBindAddr.Port) + `
}
retry_join = ["` + srv.Config.SerfBindAddrLAN.String() + `"]`,
UseHTTPS: true,
})
defer client.Shutdown()
// when this is successful we managed to get a TLS certificate and are using it for
// encrypted RPC connections.
testrpc.WaitForTestAgent(t, client.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
// now we need to validate that our certificate has the correct CN
aeCert := client.tlsConfigurator.Cert()
require.NotNil(t, aeCert)
id := connect.SpiffeIDAgent{
Host: connect.TestClusterID + ".consul",
Datacenter: "dc1",
Agent: "test-client",
}
x509Cert, err := x509.ParseCertificate(aeCert.Certificate[0])
require.NoError(t, err)
require.Empty(t, x509Cert.Subject.CommonName)
require.Len(t, x509Cert.URIs, 1)
require.Equal(t, id.URI(), x509Cert.URIs[0])
}
func TestSharedRPCRouter(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
// this test runs both a server and client and ensures that the shared
// router is being used. It would be possible for the Client and Server
// types to create and use their own routers and for RPCs such as the
// ones used in WaitForTestAgent to succeed. However accessing the
// router stored on the agent ensures that Serf information from the
// Client/Server types are being set in the same shared rpc router.
srv := NewTestAgent(t, "")
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1")
mgr, server := srv.Agent.baseDeps.Router.FindLANRoute()
require.NotNil(t, mgr)
require.NotNil(t, server)
client := NewTestAgent(t, `
server = false
bootstrap = false
retry_join = ["`+srv.Config.SerfBindAddrLAN.String()+`"]
`)
testrpc.WaitForTestAgent(t, client.RPC, "dc1")
mgr, server = client.Agent.baseDeps.Router.FindLANRoute()
require.NotNil(t, mgr)
require.NotNil(t, server)
}
func TestAgent_ListenHTTP_MultipleAddresses(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
ports := freeport.GetN(t, 2)
caConfig := tlsutil.Config{}
tlsConf, err := tlsutil.NewConfigurator(caConfig, hclog.New(nil))
require.NoError(t, err)
bd := BaseDeps{
Deps: consul.Deps{
Logger: hclog.NewInterceptLogger(nil),
Tokens: new(token.Store),
TLSConfigurator: tlsConf,
GRPCConnPool: &fakeGRPCConnPool{},
},
RuntimeConfig: &config.RuntimeConfig{
HTTPAddrs: []net.Addr{
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[0]},
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[1]},
},
},
Cache: cache.New(cache.Options{}),
}
cfg := config.RuntimeConfig{BuildDate: time.Date(2000, 1, 1, 0, 0, 1, 0, time.UTC)}
bd, err = initEnterpriseBaseDeps(bd, &cfg)
require.NoError(t, err)
agent, err := New(bd)
require.NoError(t, err)
agent.startLicenseManager(testutil.TestContext(t))
srvs, err := agent.listenHTTP()
require.NoError(t, err)
defer func() {
ctx := context.Background()
for _, srv := range srvs {
srv.Shutdown(ctx)
}
}()
ctx, cancel := context.WithTimeout(context.Background(), 2*time.Second)
t.Cleanup(cancel)
g := new(errgroup.Group)
for _, s := range srvs {
g.Go(s.Run)
}
require.Len(t, srvs, 2)
require.Len(t, uniqueAddrs(srvs), 2)
client := &http.Client{}
for _, s := range srvs {
u := url.URL{Scheme: s.Protocol, Host: s.Addr.String()}
req, err := http.NewRequest(http.MethodGet, u.String(), nil)
require.NoError(t, err)
resp, err := client.Do(req.WithContext(ctx))
require.NoError(t, err)
require.Equal(t, 200, resp.StatusCode)
}
}
func uniqueAddrs(srvs []apiServer) map[string]struct{} {
result := make(map[string]struct{}, len(srvs))
for _, s := range srvs {
result[s.Addr.String()] = struct{}{}
}
return result
}
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
func TestAgent_AutoReloadDoReload_WhenCertAndKeyUpdated(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
certsDir := testutil.TempDir(t, "auto-config")
// write some test TLS certificates out to the cfg dir
serverName := "server.dc1.consul"
signer, _, err := tlsutil.GeneratePrivateKey()
require.NoError(t, err)
ca, _, err := tlsutil.GenerateCA(tlsutil.CAOpts{Signer: signer})
require.NoError(t, err)
cert, privateKey, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFile := filepath.Join(certsDir, "cert.pem")
caFile := filepath.Join(certsDir, "cacert.pem")
keyFile := filepath.Join(certsDir, "key.pem")
require.NoError(t, os.WriteFile(certFile, []byte(cert), 0600))
require.NoError(t, os.WriteFile(caFile, []byte(ca), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(privateKey), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// generate a gossip key
gossipKey := make([]byte, 32)
n, err := rand.Read(gossipKey)
require.NoError(t, err)
require.Equal(t, 32, n)
gossipKeyEncoded := base64.StdEncoding.EncodeToString(gossipKey)
hclConfig := TestACLConfigWithParams(nil) + `
encrypt = "` + gossipKeyEncoded + `"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "` + caFile + `"
cert_file = "` + certFile + `"
key_file = "` + keyFile + `"
connect { enabled = true }
auto_reload_config = true
`
srv := StartTestAgent(t, TestAgent{Name: "TestAgent-Server", HCL: hclConfig})
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
aeCert := srv.tlsConfigurator.Cert()
require.NotNil(t, aeCert)
cert2, privateKey2, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
require.NoError(t, os.WriteFile(certFile, []byte(cert2), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(privateKey2), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
retry.Run(t, func(r *retry.R) {
aeCert2 := srv.tlsConfigurator.Cert()
require.NotEqual(r, aeCert.Certificate, aeCert2.Certificate)
})
}
func TestAgent_AutoReloadDoNotReload_WhenCaUpdated(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
certsDir := testutil.TempDir(t, "auto-config")
// write some test TLS certificates out to the cfg dir
serverName := "server.dc1.consul"
signer, _, err := tlsutil.GeneratePrivateKey()
require.NoError(t, err)
ca, _, err := tlsutil.GenerateCA(tlsutil.CAOpts{Signer: signer})
require.NoError(t, err)
cert, privateKey, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFile := filepath.Join(certsDir, "cert.pem")
caFile := filepath.Join(certsDir, "cacert.pem")
keyFile := filepath.Join(certsDir, "key.pem")
require.NoError(t, os.WriteFile(certFile, []byte(cert), 0600))
require.NoError(t, os.WriteFile(caFile, []byte(ca), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(privateKey), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// generate a gossip key
gossipKey := make([]byte, 32)
n, err := rand.Read(gossipKey)
require.NoError(t, err)
require.Equal(t, 32, n)
gossipKeyEncoded := base64.StdEncoding.EncodeToString(gossipKey)
hclConfig := TestACLConfigWithParams(nil) + `
encrypt = "` + gossipKeyEncoded + `"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "` + caFile + `"
cert_file = "` + certFile + `"
key_file = "` + keyFile + `"
connect { enabled = true }
auto_reload_config = true
`
srv := StartTestAgent(t, TestAgent{Name: "TestAgent-Server", HCL: hclConfig})
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
aeCA := srv.tlsConfigurator.ManualCAPems()
require.NotNil(t, aeCA)
ca2, _, err := tlsutil.GenerateCA(tlsutil.CAOpts{Signer: signer})
require.NoError(t, err)
require.NoError(t, os.WriteFile(caFile, []byte(ca2), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// wait a bit to see if it get updated.
time.Sleep(time.Second)
aeCA2 := srv.tlsConfigurator.ManualCAPems()
require.NotNil(t, aeCA2)
require.Equal(t, aeCA, aeCA2)
}
func TestAgent_AutoReloadDoReload_WhenCertThenKeyUpdated(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
certsDir := testutil.TempDir(t, "auto-config")
// write some test TLS certificates out to the cfg dir
serverName := "server.dc1.consul"
signer, _, err := tlsutil.GeneratePrivateKey()
require.NoError(t, err)
ca, _, err := tlsutil.GenerateCA(tlsutil.CAOpts{Signer: signer})
require.NoError(t, err)
cert, privateKey, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFile := filepath.Join(certsDir, "cert.pem")
caFile := filepath.Join(certsDir, "cacert.pem")
keyFile := filepath.Join(certsDir, "key.pem")
require.NoError(t, os.WriteFile(certFile, []byte(cert), 0600))
require.NoError(t, os.WriteFile(caFile, []byte(ca), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(privateKey), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// generate a gossip key
gossipKey := make([]byte, 32)
n, err := rand.Read(gossipKey)
require.NoError(t, err)
require.Equal(t, 32, n)
gossipKeyEncoded := base64.StdEncoding.EncodeToString(gossipKey)
hclConfig := TestACLConfigWithParams(nil)
configFile := testutil.TempDir(t, "config") + "/config.hcl"
require.NoError(t, os.WriteFile(configFile, []byte(`
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
encrypt = "`+gossipKeyEncoded+`"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "`+caFile+`"
cert_file = "`+certFile+`"
key_file = "`+keyFile+`"
connect { enabled = true }
auto_reload_config = true
`), 0600))
srv := StartTestAgent(t, TestAgent{Name: "TestAgent-Server", HCL: hclConfig, configFiles: []string{configFile}})
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert1Pub := srv.tlsConfigurator.Cert().Certificate
cert1Key := srv.tlsConfigurator.Cert().PrivateKey
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
certNew, privateKeyNew, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFileNew := filepath.Join(certsDir, "cert_new.pem")
require.NoError(t, os.WriteFile(certFileNew, []byte(certNew), 0600))
require.NoError(t, os.WriteFile(configFile, []byte(`
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
encrypt = "`+gossipKeyEncoded+`"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "`+caFile+`"
cert_file = "`+certFileNew+`"
key_file = "`+keyFile+`"
connect { enabled = true }
auto_reload_config = true
`), 0600))
// cert should not change as we did not update the associated key
time.Sleep(1 * time.Second)
retry.Run(t, func(r *retry.R) {
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert := srv.tlsConfigurator.Cert()
require.NotNil(r, cert)
require.Equal(r, cert1Pub, cert.Certificate)
require.Equal(r, cert1Key, cert.PrivateKey)
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
})
require.NoError(t, os.WriteFile(keyFile, []byte(privateKeyNew), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// cert should change as we did not update the associated key
time.Sleep(1 * time.Second)
retry.Run(t, func(r *retry.R) {
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
require.NotEqual(r, cert1Pub, srv.tlsConfigurator.Cert().Certificate)
require.NotEqual(r, cert1Key, srv.tlsConfigurator.Cert().PrivateKey)
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
})
}
func TestAgent_AutoReloadDoReload_WhenKeyThenCertUpdated(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
certsDir := testutil.TempDir(t, "auto-config")
// write some test TLS certificates out to the cfg dir
serverName := "server.dc1.consul"
signer, _, err := tlsutil.GeneratePrivateKey()
require.NoError(t, err)
ca, _, err := tlsutil.GenerateCA(tlsutil.CAOpts{Signer: signer})
require.NoError(t, err)
cert, privateKey, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFile := filepath.Join(certsDir, "cert.pem")
caFile := filepath.Join(certsDir, "cacert.pem")
keyFile := filepath.Join(certsDir, "key.pem")
require.NoError(t, os.WriteFile(certFile, []byte(cert), 0600))
require.NoError(t, os.WriteFile(caFile, []byte(ca), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(privateKey), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// generate a gossip key
gossipKey := make([]byte, 32)
n, err := rand.Read(gossipKey)
require.NoError(t, err)
require.Equal(t, 32, n)
gossipKeyEncoded := base64.StdEncoding.EncodeToString(gossipKey)
hclConfig := TestACLConfigWithParams(nil)
configFile := testutil.TempDir(t, "config") + "/config.hcl"
require.NoError(t, os.WriteFile(configFile, []byte(`
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
encrypt = "`+gossipKeyEncoded+`"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "`+caFile+`"
cert_file = "`+certFile+`"
key_file = "`+keyFile+`"
connect { enabled = true }
auto_reload_config = true
`), 0600))
srv := StartTestAgent(t, TestAgent{Name: "TestAgent-Server", HCL: hclConfig, configFiles: []string{configFile}})
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert1Pub := srv.tlsConfigurator.Cert().Certificate
cert1Key := srv.tlsConfigurator.Cert().PrivateKey
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
certNew, privateKeyNew, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFileNew := filepath.Join(certsDir, "cert_new.pem")
require.NoError(t, os.WriteFile(keyFile, []byte(privateKeyNew), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// cert should not change as we did not update the associated key
time.Sleep(1 * time.Second)
retry.Run(t, func(r *retry.R) {
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert := srv.tlsConfigurator.Cert()
require.NotNil(r, cert)
require.Equal(r, cert1Pub, cert.Certificate)
require.Equal(r, cert1Key, cert.PrivateKey)
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
})
require.NoError(t, os.WriteFile(certFileNew, []byte(certNew), 0600))
require.NoError(t, os.WriteFile(configFile, []byte(`
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
encrypt = "`+gossipKeyEncoded+`"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "`+caFile+`"
cert_file = "`+certFileNew+`"
key_file = "`+keyFile+`"
connect { enabled = true }
auto_reload_config = true
`), 0600))
// cert should change as we did not update the associated key
time.Sleep(1 * time.Second)
retry.Run(t, func(r *retry.R) {
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert := srv.tlsConfigurator.Cert()
require.NotNil(r, cert)
require.NotEqual(r, cert1Key, cert.Certificate)
require.NotEqual(r, cert1Key, cert.PrivateKey)
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
})
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert2Pub := srv.tlsConfigurator.Cert().Certificate
cert2Key := srv.tlsConfigurator.Cert().PrivateKey
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
certNew2, privateKeyNew2, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
require.NoError(t, os.WriteFile(keyFile, []byte(privateKeyNew2), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// cert should not change as we did not update the associated cert
time.Sleep(1 * time.Second)
retry.Run(t, func(r *retry.R) {
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert := srv.tlsConfigurator.Cert()
require.NotNil(r, cert)
require.Equal(r, cert2Pub, cert.Certificate)
require.Equal(r, cert2Key, cert.PrivateKey)
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
})
require.NoError(t, os.WriteFile(certFileNew, []byte(certNew2), 0600))
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
// cert should change as we did update the associated key
time.Sleep(1 * time.Second)
retry.Run(t, func(r *retry.R) {
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
cert := srv.tlsConfigurator.Cert()
require.NotNil(r, cert)
require.NotEqual(r, cert2Pub, cert.Certificate)
require.NotEqual(r, cert2Key, cert.PrivateKey)
})
}
func Test_coalesceTimerTwoPeriods(t *testing.T) {
certsDir := testutil.TempDir(t, "auto-config")
// write some test TLS certificates out to the cfg dir
serverName := "server.dc1.consul"
signer, _, err := tlsutil.GeneratePrivateKey()
require.NoError(t, err)
ca, _, err := tlsutil.GenerateCA(tlsutil.CAOpts{Signer: signer})
require.NoError(t, err)
cert, privateKey, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFile := filepath.Join(certsDir, "cert.pem")
caFile := filepath.Join(certsDir, "cacert.pem")
keyFile := filepath.Join(certsDir, "key.pem")
require.NoError(t, os.WriteFile(certFile, []byte(cert), 0600))
require.NoError(t, os.WriteFile(caFile, []byte(ca), 0600))
require.NoError(t, os.WriteFile(keyFile, []byte(privateKey), 0600))
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
// generate a gossip key
gossipKey := make([]byte, 32)
n, err := rand.Read(gossipKey)
require.NoError(t, err)
require.Equal(t, 32, n)
gossipKeyEncoded := base64.StdEncoding.EncodeToString(gossipKey)
hclConfig := TestACLConfigWithParams(nil)
configFile := testutil.TempDir(t, "config") + "/config.hcl"
require.NoError(t, os.WriteFile(configFile, []byte(`
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
encrypt = "`+gossipKeyEncoded+`"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "`+caFile+`"
cert_file = "`+certFile+`"
key_file = "`+keyFile+`"
connect { enabled = true }
auto_reload_config = true
`), 0600))
coalesceInterval := 100 * time.Millisecond
testAgent := TestAgent{Name: "TestAgent-Server", HCL: hclConfig, configFiles: []string{configFile}, Config: &config.RuntimeConfig{
AutoReloadConfigCoalesceInterval: coalesceInterval,
}}
srv := StartTestAgent(t, testAgent)
defer srv.Shutdown()
testrpc.WaitForTestAgent(t, srv.RPC, "dc1", testrpc.WithToken(TestDefaultInitialManagementToken))
cert1Pub := srv.tlsConfigurator.Cert().Certificate
cert1Key := srv.tlsConfigurator.Cert().PrivateKey
certNew, privateKeyNew, err := tlsutil.GenerateCert(tlsutil.CertOpts{
Signer: signer,
CA: ca,
Name: "Test Cert Name",
Days: 365,
DNSNames: []string{serverName},
ExtKeyUsage: []x509.ExtKeyUsage{x509.ExtKeyUsageServerAuth, x509.ExtKeyUsageClientAuth},
})
require.NoError(t, err)
certFileNew := filepath.Join(certsDir, "cert_new.pem")
require.NoError(t, os.WriteFile(certFileNew, []byte(certNew), 0600))
require.NoError(t, os.WriteFile(configFile, []byte(`
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
encrypt = "`+gossipKeyEncoded+`"
encrypt_verify_incoming = true
encrypt_verify_outgoing = true
verify_incoming = true
verify_outgoing = true
verify_server_hostname = true
ca_file = "`+caFile+`"
cert_file = "`+certFileNew+`"
key_file = "`+keyFile+`"
connect { enabled = true }
auto_reload_config = true
`), 0600))
// cert should not change as we did not update the associated key
time.Sleep(coalesceInterval * 2)
retry.Run(t, func(r *retry.R) {
cert := srv.tlsConfigurator.Cert()
require.NotNil(r, cert)
require.Equal(r, cert1Pub, cert.Certificate)
require.Equal(r, cert1Key, cert.PrivateKey)
})
require.NoError(t, os.WriteFile(keyFile, []byte(privateKeyNew), 0600))
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
// cert should change as we did not update the associated key
time.Sleep(coalesceInterval * 2)
retry.Run(t, func(r *retry.R) {
require.NotEqual(r, cert1Pub, srv.tlsConfigurator.Cert().Certificate)
require.NotEqual(r, cert1Key, srv.tlsConfigurator.Cert().PrivateKey)
auto-reload configuration when config files change (#12329) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co>
2022-03-31 19:11:49 +00:00
})
add a rate limiter to config auto-reload (#12490) * add config watcher to the config package * add logging to watcher * add test and refactor to add WatcherEvent. * add all API calls and fix a bug with recreated files * add tests for watcher * remove the unnecessary use of context * Add debug log and a test for file rename * use inode to detect if the file is recreated/replaced and only listen to create events. * tidy ups (#1535) * tidy ups * Add tests for inode reconcile * fix linux vs windows syscall * fix linux vs windows syscall * fix windows compile error * increase timeout * use ctime ID * remove remove/creation test as it's a use case that fail in linux * fix linux/windows to use Ino/CreationTime * fix the watcher to only overwrite current file id * fix linter error * fix remove/create test * set reconcile loop to 200 Milliseconds * fix watcher to not trigger event on remove, add more tests * on a remove event try to add the file back to the watcher and trigger the handler if success * fix race condition * fix flaky test * fix race conditions * set level to info * fix when file is removed and get an event for it after * fix to trigger handler when we get a remove but re-add fail * fix error message * add tests for directory watch and fixes * detect if a file is a symlink and return an error on Add * rename Watcher to FileWatcher and remove symlink deref * add fsnotify@v1.5.1 * fix go mod * do not reset timer on errors, rename OS specific files * rename New func * events trigger on write and rename * add missing test * fix flaking tests * fix flaky test * check reconcile when removed * delete invalid file * fix test to create files with different mod time. * back date file instead of sleeping * add watching file in agent command. * fix watcher call to use new API * add configuration and stop watcher when server stop * add certs as watched files * move FileWatcher to the agent start instead of the command code * stop watcher before replacing it * save watched files in agent * add add and remove interfaces to the file watcher * fix remove to not return an error * use `Add` and `Remove` to update certs files * fix tests * close events channel on the file watcher even when the context is done * extract `NotAutoReloadableRuntimeConfig` is a separate struct * fix linter errors * add Ca configs and outgoing verify to the not auto reloadable config * add some logs and fix to use background context * add tests to auto-config reload * remove stale test * add tests to changes to config files * add check to see if old cert files still trigger updates * rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig` * fix to re add both key and cert file. Add test to cover this case. * review suggestion Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * add check to static runtime config changes * fix test * add changelog file * fix review comments * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * update flag description Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> * fix compilation error * add static runtime config support * fix test * fix review comments * fix log test * Update .changelog/12329.txt Co-authored-by: Dan Upton <daniel@floppy.co> * transfer tests to runtime_test.go * fix filewatcher Replace to not deadlock. * avoid having lingering locks Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * split ReloadConfig func * fix warning message Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * convert `FileWatcher` into an interface * fix compilation errors * fix tests * extract func for adding and removing files * add a coalesceTimer with a very small timer * extract coaelsce Timer and add a shim for testing * add tests to coalesceTimer fix to send remaining events * set `coalesceTimer` to 1 Second * support symlink, fix a nil deref. * fix compile error * fix compile error * refactor file watcher rate limiting to be a Watcher implementation * fix linter issue * fix runtime config * fix runtime test * fix flaky tests * fix compile error * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> * fix agent New to return an error if File watcher New return an error * quit timer loop if ctx is canceled * Apply suggestions from code review Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: FFMMM <FFMMM@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-04-04 15:31:39 +00:00
}
2022-04-14 20:55:10 +00:00
func TestAgent_startListeners(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
t.Parallel()
ports := freeport.GetN(t, 3)
bd := BaseDeps{
Deps: consul.Deps{
Logger: hclog.NewInterceptLogger(nil),
Tokens: new(token.Store),
GRPCConnPool: &fakeGRPCConnPool{},
},
RuntimeConfig: &config.RuntimeConfig{
HTTPAddrs: []net.Addr{},
},
Cache: cache.New(cache.Options{}),
}
bd, err := initEnterpriseBaseDeps(bd, &config.RuntimeConfig{})
require.NoError(t, err)
agent, err := New(bd)
require.NoError(t, err)
// use up an address
used := net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[2]}
l, err := net.Listen("tcp", used.String())
require.NoError(t, err)
t.Cleanup(func() { l.Close() })
var lns []net.Listener
t.Cleanup(func() {
for _, ln := range lns {
ln.Close()
}
})
// first two addresses open listeners but third address should fail
lns, err = agent.startListeners([]net.Addr{
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[0]},
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[1]},
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[2]},
})
require.Contains(t, err.Error(), "address already in use")
// first two ports should be freed up
retry.Run(t, func(r *retry.R) {
lns, err = agent.startListeners([]net.Addr{
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[0]},
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[1]},
})
require.NoError(r, err)
require.Len(r, lns, 2)
})
// first two ports should be in use
retry.Run(t, func(r *retry.R) {
_, err = agent.startListeners([]net.Addr{
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[0]},
&net.TCPAddr{IP: net.ParseIP("127.0.0.1"), Port: ports[1]},
})
require.Contains(r, err.Error(), "address already in use")
})
}
func TestAgent_ServerCertificate(t *testing.T) {
if testing.Short() {
t.Skip("too slow for testing.Short")
}
const expectURI = "spiffe://11111111-2222-3333-4444-555555555555.consul/agent/server/dc/dc1"
// Leader should acquire a sever cert after bootstrapping.
a1 := NewTestAgent(t, `
node_name = "a1"
acl {
enabled = true
tokens {
initial_management = "root"
default = "root"
}
}
connect {
enabled = true
}
peering {
enabled = true
}`)
defer a1.Shutdown()
testrpc.WaitForTestAgent(t, a1.RPC, "dc1")
retry.Run(t, func(r *retry.R) {
cert := a1.tlsConfigurator.AutoEncryptCert()
require.NotNil(r, cert)
require.Len(r, cert.URIs, 1)
require.Equal(r, expectURI, cert.URIs[0].String())
})
// Join a follower, and it should be able to acquire a server cert as well.
a2 := NewTestAgent(t, `
node_name = "a2"
bootstrap = false
acl {
enabled = true
tokens {
initial_management = "root"
default = "root"
}
}
connect {
enabled = true
}
peering {
enabled = true
}`)
defer a2.Shutdown()
_, err := a2.JoinLAN([]string{fmt.Sprintf("127.0.0.1:%d", a1.Config.SerfPortLAN)}, nil)
require.NoError(t, err)
testrpc.WaitForTestAgent(t, a2.RPC, "dc1")
retry.Run(t, func(r *retry.R) {
cert := a2.tlsConfigurator.AutoEncryptCert()
require.NotNil(r, cert)
require.Len(r, cert.URIs, 1)
require.Equal(r, expectURI, cert.URIs[0].String())
})
}
func TestAgent_startListeners_scada(t *testing.T) {
t.Parallel()
pvd := scada.NewMockProvider(t)
c := capability.NewAddr("testcap")
pvd.EXPECT().Listen(c.Capability()).Return(nil, nil).Once()
bd := BaseDeps{
Deps: consul.Deps{
Logger: hclog.NewInterceptLogger(nil),
Tokens: new(token.Store),
GRPCConnPool: &fakeGRPCConnPool{},
HCP: hcp.Deps{
Provider: pvd,
},
},
RuntimeConfig: &config.RuntimeConfig{},
Cache: cache.New(cache.Options{}),
}
cfg := config.RuntimeConfig{BuildDate: time.Date(2000, 1, 1, 0, 0, 1, 0, time.UTC)}
bd, err := initEnterpriseBaseDeps(bd, &cfg)
require.NoError(t, err)
agent, err := New(bd)
require.NoError(t, err)
_, err = agent.startListeners([]net.Addr{c})
require.NoError(t, err)
}
func TestAgent_scadaProvider(t *testing.T) {
pvd := scada.NewMockProvider(t)
// this listener is used when mocking out the scada provider
l, err := net.Listen("tcp4", fmt.Sprintf("127.0.0.1:%d", freeport.GetOne(t)))
require.NoError(t, err)
defer require.NoError(t, l.Close())
pvd.EXPECT().UpdateMeta(mock.Anything).Once()
pvd.EXPECT().Start().Return(nil).Once()
pvd.EXPECT().Listen(scada.CAPCoreAPI.Capability()).Return(l, nil).Once()
pvd.EXPECT().Stop().Return(nil).Once()
2022-09-30 15:33:49 +00:00
pvd.EXPECT().SessionStatus().Return("test")
a := TestAgent{
OverrideDeps: func(deps *BaseDeps) {
deps.HCP.Provider = pvd
},
Overrides: `
cloud {
resource_id = "organization/0b9de9a3-8403-4ca6-aba8-fca752f42100/project/0b9de9a3-8403-4ca6-aba8-fca752f42100/consul.cluster/0b9de9a3-8403-4ca6-aba8-fca752f42100"
client_id = "test"
client_secret = "test"
}`,
}
defer a.Shutdown()
require.NoError(t, a.Start(t))
_, err = api.NewClient(&api.Config{Address: l.Addr().String()})
require.NoError(t, err)
}
2022-04-14 20:55:10 +00:00
func getExpectedCaPoolByFile(t *testing.T) *x509.CertPool {
pool := x509.NewCertPool()
data, err := os.ReadFile("../test/ca/root.cer")
2022-04-14 20:55:10 +00:00
require.NoError(t, err)
if !pool.AppendCertsFromPEM(data) {
t.Fatal("could not add test ca ../test/ca/root.cer to pool")
}
return pool
}
func getExpectedCaPoolByDir(t *testing.T) *x509.CertPool {
pool := x509.NewCertPool()
entries, err := os.ReadDir("../test/ca_path")
require.NoError(t, err)
for _, entry := range entries {
filename := path.Join("../test/ca_path", entry.Name())
data, err := os.ReadFile(filename)
2022-04-14 20:55:10 +00:00
require.NoError(t, err)
if !pool.AppendCertsFromPEM(data) {
t.Fatalf("could not add test ca %s to pool", filename)
}
}
return pool
}
// lazyCerts has a func field which can't be compared.
var cmpCertPool = cmp.Options{
cmpopts.IgnoreFields(x509.CertPool{}, "lazyCerts"),
cmp.AllowUnexported(x509.CertPool{}),
}
func assertDeepEqual(t *testing.T, x, y interface{}, opts ...cmp.Option) {
t.Helper()
if diff := cmp.Diff(x, y, opts...); diff != "" {
t.Fatalf("assertion failed: values are not equal\n--- expected\n+++ actual\n%v", diff)
}
}