984 lines
43 KiB
Plaintext
984 lines
43 KiB
Plaintext
// Copyright (c) 2015-2017 The Khronos Group Inc.
|
|
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
|
|
|
|
[[queries]]
|
|
= Queries
|
|
|
|
_Queries_ provide a mechanism to return information about the processing of
|
|
a sequence of Vulkan commands.
|
|
Query operations are asynchronous, and as such, their results are not
|
|
returned immediately.
|
|
Instead, their results, and their availability status, are stored in a
|
|
<<queries-pools, Query Pool>>.
|
|
The state of these queries can: be read back on the host, or copied to a
|
|
buffer object on the device.
|
|
|
|
The supported query types are <<queries-occlusion,Occlusion Queries>>,
|
|
<<queries-pipestats,Pipeline Statistics Queries>>, and <<queries-timestamps,
|
|
Timestamp Queries>>.
|
|
|
|
|
|
[[queries-pools]]
|
|
== Query Pools
|
|
|
|
// refBegin VkQueryPool Opaque handle to a query pool object
|
|
|
|
Queries are managed using _query pool_ objects.
|
|
Each query pool is a collection of a specific number of queries of a
|
|
particular type.
|
|
|
|
Query pools are represented by sname:VkQueryPool handles:
|
|
|
|
include::../api/handles/VkQueryPool.txt[]
|
|
|
|
// refEnd VkQueryPool
|
|
|
|
// refBegin vkCreateQueryPool Create a new query pool object
|
|
|
|
To create a query pool, call:
|
|
|
|
include::../api/protos/vkCreateQueryPool.txt[]
|
|
|
|
* pname:device is the logical device that creates the query pool.
|
|
* pname:pCreateInfo is a pointer to an instance of the
|
|
sname:VkQueryPoolCreateInfo structure containing the number and type of
|
|
queries to be managed by the pool.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
* pname:pQueryPool is a pointer to a sname:VkQueryPool handle in which the
|
|
resulting query pool object is returned.
|
|
|
|
include::../validity/protos/vkCreateQueryPool.txt[]
|
|
|
|
// refBegin VkQueryPoolCreateInfo Structure specifying parameters of a newly created query pool
|
|
|
|
The sname:VkQueryPoolCreateInfo structure is defined as:
|
|
|
|
include::../api/structs/VkQueryPoolCreateInfo.txt[]
|
|
|
|
* pname:sType is the type of this structure.
|
|
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
|
|
* pname:flags is reserved for future use.
|
|
* pname:queryType is a elink:VkQueryType value specifying the type of
|
|
queries managed by the pool.
|
|
* pname:queryCount is the number of queries managed by the pool.
|
|
* pname:pipelineStatistics is a bitmask of
|
|
elink:VkQueryPipelineStatisticFlagBits specifying which counters will be
|
|
returned in queries on the new pool, as described below in
|
|
<<queries-pipestats>>.
|
|
|
|
pname:pipelineStatistics is ignored if pname:queryType is not
|
|
ename:VK_QUERY_TYPE_PIPELINE_STATISTICS.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-VkQueryPoolCreateInfo-queryType-00791]]
|
|
If the <<features-features-pipelineStatisticsQuery,pipeline statistics
|
|
queries>> feature is not enabled, pname:queryType must: not be
|
|
ename:VK_QUERY_TYPE_PIPELINE_STATISTICS
|
|
* [[VUID-VkQueryPoolCreateInfo-queryType-00792]]
|
|
If pname:queryType is ename:VK_QUERY_TYPE_PIPELINE_STATISTICS,
|
|
pname:pipelineStatistics must: be a valid combination of
|
|
elink:VkQueryPipelineStatisticFlagBits values
|
|
****
|
|
|
|
include::../validity/structs/VkQueryPoolCreateInfo.txt[]
|
|
|
|
// refBegin vkDestroyQueryPool Destroy a query pool object
|
|
|
|
To destroy a query pool, call:
|
|
|
|
include::../api/protos/vkDestroyQueryPool.txt[]
|
|
|
|
* pname:device is the logical device that destroys the query pool.
|
|
* pname:queryPool is the query pool to destroy.
|
|
* pname:pAllocator controls host memory allocation as described in the
|
|
<<memory-allocation, Memory Allocation>> chapter.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkDestroyQueryPool-queryPool-00793]]
|
|
All submitted commands that refer to pname:queryPool must: have
|
|
completed execution
|
|
* [[VUID-vkDestroyQueryPool-queryPool-00794]]
|
|
If sname:VkAllocationCallbacks were provided when pname:queryPool was
|
|
created, a compatible set of callbacks must: be provided here
|
|
* [[VUID-vkDestroyQueryPool-queryPool-00795]]
|
|
If no sname:VkAllocationCallbacks were provided when pname:queryPool was
|
|
created, pname:pAllocator must: be `NULL`
|
|
****
|
|
|
|
include::../validity/protos/vkDestroyQueryPool.txt[]
|
|
|
|
// refBegin VkQueryType Specify the type of queries managed by a query pool
|
|
|
|
Possible values of slink:VkQueryPoolCreateInfo::pname:queryType, specifying
|
|
the type of queries managed by the pool, are:
|
|
|
|
include::../api/enums/VkQueryType.txt[]
|
|
|
|
* ename:VK_QUERY_TYPE_OCCLUSION specifies an <<queries-occlusion,
|
|
occlusion query>>.
|
|
* ename:VK_QUERY_TYPE_PIPELINE_STATISTICS specifies a <<queries-pipestats,
|
|
pipeline statistics query>>.
|
|
* ename:VK_QUERY_TYPE_TIMESTAMP specifies a <<queries-timestamps,
|
|
timestamp query>>.
|
|
|
|
// refEnd VkQueryType
|
|
|
|
|
|
[[queries-operation]]
|
|
== Query Operation
|
|
|
|
The operation of queries is controlled by the commands
|
|
flink:vkCmdBeginQuery, flink:vkCmdEndQuery, flink:vkCmdResetQueryPool,
|
|
flink:vkCmdCopyQueryPoolResults, and flink:vkCmdWriteTimestamp.
|
|
|
|
In order for a sname:VkCommandBuffer to record query management commands,
|
|
the queue family for which its sname:VkCommandPool was created must: support
|
|
the appropriate type of operations (graphics, compute) suitable for the
|
|
query type of a given query pool.
|
|
|
|
Each query in a query pool has a status that is either _unavailable_ or
|
|
_available_, and also has state to store the numerical results of a query
|
|
operation of the type requested when the query pool was created.
|
|
Resetting a query via flink:vkCmdResetQueryPool sets the status to
|
|
unavailable and makes the numerical results undefined.
|
|
Performing a query operation with flink:vkCmdBeginQuery and
|
|
flink:vkCmdEndQuery changes the status to available when the query
|
|
<<queries-operation-finished,finishes>>, and updates the numerical results.
|
|
Both the availability status and numerical results are retrieved by calling
|
|
either flink:vkGetQueryPoolResults or flink:vkCmdCopyQueryPoolResults.
|
|
|
|
[[queries-order]]
|
|
Query commands, for the same query and submitted to the same queue, execute
|
|
in their entirety in <<synchronization-submission-order, submission order>>,
|
|
relative to each other.
|
|
In effect there is an implicit execution dependency from each such query
|
|
command to all query command previously submitted to the same queue.
|
|
There is one significant exception to this; if the pname:flags parameter of
|
|
flink:vkCmdCopyQueryPoolResults does not include
|
|
ename:VK_QUERY_RESULT_WAIT_BIT, execution of flink:vkCmdCopyQueryPoolResults
|
|
may: happen-before the results of flink:vkCmdEndQuery are available.
|
|
|
|
After query pool creation, each query is in an undefined state and must: be
|
|
reset prior to use.
|
|
Queries must: also be reset between uses.
|
|
Using a query that has not been reset will result in undefined behavior.
|
|
|
|
ifdef::VK_KHX_device_group[]
|
|
|
|
If a logical device includes multiple physical devices, then each command
|
|
that writes a query must: execute on a single physical device, and any call
|
|
to flink:vkCmdBeginQuery must: execute the corresponding flink:vkCmdEndQuery
|
|
command on the same physical device.
|
|
|
|
endif::VK_KHX_device_group[]
|
|
|
|
// refBegin vkCmdResetQueryPool Reset queries in a query pool
|
|
|
|
To reset a range of queries in a query pool, call:
|
|
|
|
include::../api/protos/vkCmdResetQueryPool.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which this command will
|
|
be recorded.
|
|
* pname:queryPool is the handle of the query pool managing the queries
|
|
being reset.
|
|
* pname:firstQuery is the initial query index to reset.
|
|
* pname:queryCount is the number of queries to reset.
|
|
|
|
When executed on a queue, this command sets the status of query indices
|
|
[eq]#[pname:firstQuery, pname:firstQuery {plus} pname:queryCount - 1]# to
|
|
unavailable.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdResetQueryPool-firstQuery-00796]]
|
|
pname:firstQuery must: be less than the number of queries in
|
|
pname:queryPool
|
|
* [[VUID-vkCmdResetQueryPool-firstQuery-00797]]
|
|
The sum of pname:firstQuery and pname:queryCount must: be less than or
|
|
equal to the number of queries in pname:queryPool
|
|
****
|
|
|
|
include::../validity/protos/vkCmdResetQueryPool.txt[]
|
|
|
|
Once queries are reset and ready for use, query commands can: be issued to a
|
|
command buffer.
|
|
Occlusion queries and pipeline statistics queries count events - drawn
|
|
samples and pipeline stage invocations, respectively - resulting from
|
|
commands that are recorded between a flink:vkCmdBeginQuery command and a
|
|
flink:vkCmdEndQuery command within a specified command buffer, effectively
|
|
scoping a set of drawing and/or compute commands.
|
|
Timestamp queries write timestamps to a query pool.
|
|
|
|
A query must: begin and end in the same command buffer, although if it is a
|
|
primary command buffer, and the
|
|
<<features-features-inheritedQueries,inherited queries>> feature is enabled,
|
|
it can: execute secondary command buffers during the query operation.
|
|
For a secondary command buffer to be executed while a query is active, it
|
|
must: set the pname:occlusionQueryEnable, pname:queryFlags, and/or
|
|
pname:pipelineStatistics members of slink:VkCommandBufferInheritanceInfo to
|
|
conservative values, as described in the <<commandbuffers-recording, Command
|
|
Buffer Recording>> section.
|
|
A query must: either begin and end inside the same subpass of a render pass
|
|
instance, or must: both begin and end outside of a render pass instance
|
|
(i.e. contain entire render pass instances).
|
|
|
|
ifdef::VK_KHX_multiview[]
|
|
|
|
If queries are used while executing a render pass instance that has
|
|
multiview enabled, the query uses [eq]#N# consecutive query indices in the
|
|
query pool (starting at pname:query) where [eq]#N# is the number of bits set
|
|
in the view mask in the subpass the query is used in.
|
|
How the numerical results of the query are distributed among the queries is
|
|
implementation-dependent.
|
|
For example, some implementations may: write each view's results to a
|
|
distinct query, while other implementations may: write the total result to
|
|
the first query and write zero to the other queries.
|
|
However, the sum of the results in all the queries must: accurately reflect
|
|
the total result of the query summed over all views.
|
|
Applications can: sum the results from all the queries to compute the total
|
|
result.
|
|
|
|
Queries used with multiview rendering must: not span subpasses, i.e. they
|
|
must: begin and end in the same subpass.
|
|
|
|
endif::VK_KHX_multiview[]
|
|
|
|
// refBegin vkCmdBeginQuery Begin a query
|
|
|
|
To begin a query, call:
|
|
|
|
include::../api/protos/vkCmdBeginQuery.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which this command will
|
|
be recorded.
|
|
* pname:queryPool is the query pool that will manage the results of the
|
|
query.
|
|
* pname:query is the query index within the query pool that will contain
|
|
the results.
|
|
* pname:flags is a bitmask of elink:VkQueryControlFlagBits specifying
|
|
constraints on the types of queries that can: be performed.
|
|
|
|
If the pname:queryType of the pool is ename:VK_QUERY_TYPE_OCCLUSION and
|
|
pname:flags contains ename:VK_QUERY_CONTROL_PRECISE_BIT, an implementation
|
|
must: return a result that matches the actual number of samples passed.
|
|
This is described in more detail in <<queries-occlusion,Occlusion Queries>>.
|
|
|
|
[[queries-operation-active]]
|
|
After beginning a query, that query is considered _active_ within the
|
|
command buffer it was called in until that same query is ended.
|
|
Queries active in a primary command buffer when secondary command buffers
|
|
are executed are considered active for those secondary command buffers.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdBeginQuery-queryPool-00798]]
|
|
The query identified by pname:queryPool and pname:query must: currently
|
|
not be <<queries-operation-active,active>>
|
|
* [[VUID-vkCmdBeginQuery-queryPool-00799]]
|
|
The query identified by pname:queryPool and pname:query must: be
|
|
unavailable
|
|
* [[VUID-vkCmdBeginQuery-queryType-00800]]
|
|
If the <<features-features-occlusionQueryPrecise,precise occlusion
|
|
queries>> feature is not enabled, or the pname:queryType used to create
|
|
pname:queryPool was not ename:VK_QUERY_TYPE_OCCLUSION, pname:flags must:
|
|
not contain ename:VK_QUERY_CONTROL_PRECISE_BIT
|
|
* [[VUID-vkCmdBeginQuery-queryPool-00801]]
|
|
pname:queryPool must: have been created with a pname:queryType that
|
|
differs from that of any other queries that have been made
|
|
<<queries-operation-active,active>>, and are currently still active
|
|
within pname:commandBuffer
|
|
* [[VUID-vkCmdBeginQuery-query-00802]]
|
|
pname:query must: be less than the number of queries in pname:queryPool
|
|
* [[VUID-vkCmdBeginQuery-queryType-00803]]
|
|
If the pname:queryType used to create pname:queryPool was
|
|
ename:VK_QUERY_TYPE_OCCLUSION, the sname:VkCommandPool that
|
|
pname:commandBuffer was allocated from must: support graphics operations
|
|
* [[VUID-vkCmdBeginQuery-queryType-00804]]
|
|
If the pname:queryType used to create pname:queryPool was
|
|
ename:VK_QUERY_TYPE_PIPELINE_STATISTICS and any of the
|
|
pname:pipelineStatistics indicate graphics operations, the
|
|
sname:VkCommandPool that pname:commandBuffer was allocated from must:
|
|
support graphics operations
|
|
* [[VUID-vkCmdBeginQuery-queryType-00805]]
|
|
If the pname:queryType used to create pname:queryPool was
|
|
ename:VK_QUERY_TYPE_PIPELINE_STATISTICS and any of the
|
|
pname:pipelineStatistics indicate compute operations, the
|
|
sname:VkCommandPool that pname:commandBuffer was allocated from must:
|
|
support compute operations
|
|
ifdef::VK_KHX_multiview[]
|
|
* [[VUID-vkCmdBeginQuery-None-00806]]
|
|
All queries used by the command must: not be active
|
|
* [[VUID-vkCmdBeginQuery-None-00807]]
|
|
All queries used by the command must: be unavailable
|
|
* [[VUID-vkCmdBeginQuery-query-00808]]
|
|
If fname:vkCmdBeginQuery is called within a render pass instance, the
|
|
sum of pname:query and the number of bits set in the current subpass's
|
|
view mask must: be less than or equal to the number of queries in
|
|
pname:queryPool
|
|
endif::VK_KHX_multiview[]
|
|
****
|
|
|
|
include::../validity/protos/vkCmdBeginQuery.txt[]
|
|
|
|
// refBegin VkQueryControlFlagBits Bitmask specifying constraints on a query
|
|
|
|
Bits which can: be set in flink:vkCmdBeginQuery::pname:flags, specifying
|
|
constraints on the types of queries that can: be performed, are:
|
|
|
|
include::../api/enums/VkQueryControlFlagBits.txt[]
|
|
|
|
* ename:VK_QUERY_CONTROL_PRECISE_BIT specifies the precision of
|
|
<<queries-occlusion, occlusion queries>>.
|
|
|
|
// refEnd VkQueryControlFlagBits
|
|
|
|
// refBegin vkCmdEndQuery Ends a query
|
|
|
|
To end a query after the set of desired draw or dispatch commands is
|
|
executed, call:
|
|
|
|
include::../api/protos/vkCmdEndQuery.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which this command will
|
|
be recorded.
|
|
* pname:queryPool is the query pool that is managing the results of the
|
|
query.
|
|
* pname:query is the query index within the query pool where the result is
|
|
stored.
|
|
|
|
[[queries-operation-finished]]
|
|
As queries operate asynchronously, ending a query does not immediately set
|
|
the query's status to available.
|
|
A query is considered _finished_ when the final results of the query are
|
|
ready to be retrieved by flink:vkGetQueryPoolResults and
|
|
flink:vkCmdCopyQueryPoolResults, and this is when the query's status is set
|
|
to available.
|
|
|
|
Once a query is ended the query must: finish in finite time, unless the
|
|
state of the query is changed using other commands, e.g. by issuing a reset
|
|
of the query.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdEndQuery-queryPool-00809]]
|
|
The query identified by pname:queryPool and pname:query must: currently
|
|
be <<queries-operation-active,active>>
|
|
* [[VUID-vkCmdEndQuery-query-00810]]
|
|
pname:query must: be less than the number of queries in pname:queryPool
|
|
ifdef::VK_KHX_multiview[]
|
|
* [[VUID-vkCmdEndQuery-None-00811]]
|
|
All queries used by the command must: be active
|
|
* [[VUID-vkCmdEndQuery-query-00812]]
|
|
If fname:vkCmdEndQuery is called within a render pass instance, the sum
|
|
of pname:query and the number of bits set in the current subpass's view
|
|
mask must: be less than or equal to the number of queries in
|
|
pname:queryPool
|
|
endif::VK_KHX_multiview[]
|
|
****
|
|
|
|
include::../validity/protos/vkCmdEndQuery.txt[]
|
|
|
|
[[queries-operation-memorylayout]]
|
|
An application can: retrieve results either by requesting they be written
|
|
into application-provided memory, or by requesting they be copied into a
|
|
sname:VkBuffer.
|
|
In either case, the layout in memory is defined as follows:
|
|
|
|
* The first query's result is written starting at the first byte requested
|
|
by the command, and each subsequent query's result begins pname:stride
|
|
bytes later.
|
|
* Each query's result is a tightly packed array of unsigned integers,
|
|
either 32- or 64-bits as requested by the command, storing the numerical
|
|
results and, if requested, the availability status.
|
|
* If ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is used, the final
|
|
element of each query's result is an integer indicating whether the
|
|
query's result is available, with any non-zero value indicating that it
|
|
is available.
|
|
* Occlusion queries write one integer value - the number of samples
|
|
passed.
|
|
Pipeline statistics queries write one integer value for each bit that is
|
|
enabled in the pname:pipelineStatistics when the pool is created, and
|
|
the statistics values are written in bit order starting from the least
|
|
significant bit.
|
|
Timestamps write one integer value.
|
|
* If more than one query is retrieved and pname:stride is not at least as
|
|
large as the size of the array of integers corresponding to a single
|
|
query, the values written to memory are undefined.
|
|
|
|
// refBegin vkGetQueryPoolResults Copy results of queries in a query pool to a host memory region
|
|
|
|
To retrieve status and results for a set of queries, call:
|
|
|
|
include::../api/protos/vkGetQueryPoolResults.txt[]
|
|
|
|
* pname:device is the logical device that owns the query pool.
|
|
* pname:queryPool is the query pool managing the queries containing the
|
|
desired results.
|
|
* pname:firstQuery is the initial query index.
|
|
* pname:queryCount is the number of queries.
|
|
pname:firstQuery and pname:queryCount together define a range of
|
|
queries.
|
|
For pipeline statistics queries, each query index in the pool contains
|
|
one integer value for each bit that is enabled in
|
|
slink:VkQueryPoolCreateInfo::pname:pipelineStatistics when the pool is
|
|
created.
|
|
* pname:dataSize is the size in bytes of the buffer pointed to by
|
|
pname:pData.
|
|
* pname:pData is a pointer to a user-allocated buffer where the results
|
|
will be written
|
|
* pname:stride is the stride in bytes between results for individual
|
|
queries within pname:pData.
|
|
* pname:flags is a bitmask of elink:VkQueryResultFlagBits specifying how
|
|
and when results are returned.
|
|
|
|
If no bits are set in pname:flags, and all requested queries are in the
|
|
available state, results are written as an array of 32-bit unsigned integer
|
|
values.
|
|
The behavior when not all queries are available, is described
|
|
<<queries-wait-bit-not-set, below>>.
|
|
|
|
If ename:VK_QUERY_RESULT_64_BIT is not set and the result overflows a 32-bit
|
|
value, the value may: either wrap or saturate.
|
|
Similarly, if ename:VK_QUERY_RESULT_64_BIT is set and the result overflows a
|
|
64-bit value, the value may: either wrap or saturate.
|
|
|
|
If ename:VK_QUERY_RESULT_WAIT_BIT is set, Vulkan will wait for each query to
|
|
be in the available state before retrieving the numerical results for that
|
|
query.
|
|
In this case, fname:vkGetQueryPoolResults is guaranteed to succeed and
|
|
return ename:VK_SUCCESS if the queries become available in a finite time
|
|
(i.e. if they have been issued and not reset).
|
|
If queries will never finish (e.g. due to being reset but not issued), then
|
|
fname:vkGetQueryPoolResults may: not return in finite time.
|
|
|
|
[[queries-wait-bit-not-set]]
|
|
If ename:VK_QUERY_RESULT_WAIT_BIT and ename:VK_QUERY_RESULT_PARTIAL_BIT are
|
|
both not set then no result values are written to pname:pData for queries
|
|
that are in the unavailable state at the time of the call, and
|
|
fname:vkGetQueryPoolResults returns ename:VK_NOT_READY.
|
|
However, availability state is still written to pname:pData for those
|
|
queries if ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Applications must: take care to ensure that use of the
|
|
ename:VK_QUERY_RESULT_WAIT_BIT bit has the desired effect.
|
|
|
|
For example, if a query has been used previously and a command buffer
|
|
records the commands fname:vkCmdResetQueryPool, fname:vkCmdBeginQuery, and
|
|
fname:vkCmdEndQuery for that query, then the query will remain in the
|
|
available state until the fname:vkCmdResetQueryPool command executes on a
|
|
queue.
|
|
Applications can: use fences or events to ensure that a query has already
|
|
been reset before checking for its results or availability status.
|
|
Otherwise, a stale value could be returned from a previous use of the query.
|
|
|
|
The above also applies when ename:VK_QUERY_RESULT_WAIT_BIT is used in
|
|
combination with ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT.
|
|
In this case, the returned availability status may: reflect the result of a
|
|
previous use of the query unless the fname:vkCmdResetQueryPool command has
|
|
been executed since the last use of the query.
|
|
====
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Applications can: double-buffer query pool usage, with a pool per frame, and
|
|
reset queries at the end of the frame in which they are read.
|
|
====
|
|
|
|
If ename:VK_QUERY_RESULT_PARTIAL_BIT is set, ename:VK_QUERY_RESULT_WAIT_BIT
|
|
is not set, and the query's status is unavailable, an intermediate result
|
|
value between zero and the final result value is written to pname:pData for
|
|
that query.
|
|
|
|
ename:VK_QUERY_RESULT_PARTIAL_BIT must: not be used if the pool's
|
|
pname:queryType is ename:VK_QUERY_TYPE_TIMESTAMP.
|
|
|
|
If ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set, the final integer
|
|
value written for each query is non-zero if the query's status was available
|
|
or zero if the status was unavailable.
|
|
When ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is used, implementations
|
|
must: guarantee that if they return a non-zero availability value then the
|
|
numerical results must: be valid, assuming the results are not reset by a
|
|
subsequent command.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Satisfying this guarantee may: require careful ordering by the application,
|
|
e.g. to read the availability status before reading the results.
|
|
====
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkGetQueryPoolResults-firstQuery-00813]]
|
|
pname:firstQuery must: be less than the number of queries in
|
|
pname:queryPool
|
|
* [[VUID-vkGetQueryPoolResults-flags-00814]]
|
|
If ename:VK_QUERY_RESULT_64_BIT is not set in pname:flags then
|
|
pname:pData and pname:stride must: be multiples of `4`
|
|
* [[VUID-vkGetQueryPoolResults-flags-00815]]
|
|
If ename:VK_QUERY_RESULT_64_BIT is set in pname:flags then pname:pData
|
|
and pname:stride must: be multiples of `8`
|
|
* [[VUID-vkGetQueryPoolResults-firstQuery-00816]]
|
|
The sum of pname:firstQuery and pname:queryCount must: be less than or
|
|
equal to the number of queries in pname:queryPool
|
|
* [[VUID-vkGetQueryPoolResults-dataSize-00817]]
|
|
pname:dataSize must: be large enough to contain the result of each
|
|
query, as described <<queries-operation-memorylayout,here>>
|
|
* [[VUID-vkGetQueryPoolResults-queryType-00818]]
|
|
If the pname:queryType used to create pname:queryPool was
|
|
ename:VK_QUERY_TYPE_TIMESTAMP, pname:flags must: not contain
|
|
ename:VK_QUERY_RESULT_PARTIAL_BIT
|
|
****
|
|
|
|
include::../validity/protos/vkGetQueryPoolResults.txt[]
|
|
|
|
// refBegin VkQueryResultFlagBits Bitmask specifying how and when query results are returned
|
|
|
|
Bits which can: be set in flink:vkGetQueryPoolResults::pname:flags and
|
|
flink:vkCmdCopyQueryPoolResults::pname:flags, specifying how and when
|
|
results are returned, are:
|
|
|
|
include::../api/enums/VkQueryResultFlagBits.txt[]
|
|
|
|
* ename:VK_QUERY_RESULT_64_BIT specifies the results will be written as an
|
|
array of 64-bit unsigned integer values.
|
|
If this bit is not set, the results will be written as an array of
|
|
32-bit unsigned integer values.
|
|
* ename:VK_QUERY_RESULT_WAIT_BIT specifies that Vulkan will wait for each
|
|
query's status to become available before retrieving its results.
|
|
* ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT specifies that the
|
|
availability status accompanies the results.
|
|
* ename:VK_QUERY_RESULT_PARTIAL_BIT specifies that returning partial
|
|
results is acceptable.
|
|
|
|
// refEnd VkQueryResultFlagBits
|
|
|
|
// refBegin vkCmdCopyQueryPoolResults Copy the results of queries in a query pool to a buffer object
|
|
|
|
To copy query statuses and numerical results directly to buffer memory,
|
|
call:
|
|
|
|
include::../api/protos/vkCmdCopyQueryPoolResults.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which this command will
|
|
be recorded.
|
|
* pname:queryPool is the query pool managing the queries containing the
|
|
desired results.
|
|
* pname:firstQuery is the initial query index.
|
|
* pname:queryCount is the number of queries.
|
|
pname:firstQuery and pname:queryCount together define a range of
|
|
queries.
|
|
* pname:dstBuffer is a sname:VkBuffer object that will receive the results
|
|
of the copy command.
|
|
* pname:dstOffset is an offset into pname:dstBuffer.
|
|
* pname:stride is the stride in bytes between results for individual
|
|
queries within pname:dstBuffer.
|
|
The required size of the backing memory for pname:dstBuffer is
|
|
determined as described above for flink:vkGetQueryPoolResults.
|
|
* pname:flags is a bitmask of elink:VkQueryResultFlagBits specifying how
|
|
and when results are returned.
|
|
|
|
fname:vkCmdCopyQueryPoolResults is guaranteed to see the effect of previous
|
|
uses of fname:vkCmdResetQueryPool in the same queue, without any additional
|
|
synchronization.
|
|
Thus, the results will always reflect the most recent use of the query.
|
|
|
|
pname:flags has the same possible values described above for the pname:flags
|
|
parameter of flink:vkGetQueryPoolResults, but the different style of
|
|
execution causes some subtle behavioral differences.
|
|
Because fname:vkCmdCopyQueryPoolResults executes in order with respect to
|
|
other query commands, there is less ambiguity about which use of a query is
|
|
being requested.
|
|
|
|
If no bits are set in pname:flags, results for all requested queries in the
|
|
available state are written as 32-bit unsigned integer values, and nothing
|
|
is written for queries in the unavailable state.
|
|
|
|
If ename:VK_QUERY_RESULT_64_BIT is set, the results are written as an array
|
|
of 64-bit unsigned integer values as described for
|
|
flink:vkGetQueryPoolResults.
|
|
|
|
If ename:VK_QUERY_RESULT_WAIT_BIT is set, the implementation will wait for
|
|
each query's status to be in the available state before retrieving the
|
|
numerical results for that query.
|
|
This is guaranteed to reflect the most recent use of the query on the same
|
|
queue, assuming that the query is not being simultaneously used by other
|
|
queues.
|
|
If the query does not become available in a finite amount of time (e.g. due
|
|
to not issuing a query since the last reset), a ename:VK_ERROR_DEVICE_LOST
|
|
error may: occur.
|
|
|
|
Similarly, if ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set and
|
|
ename:VK_QUERY_RESULT_WAIT_BIT is not set, the availability is guaranteed to
|
|
reflect the most recent use of the query on the same queue, assuming that
|
|
the query is not being simultaneously used by other queues.
|
|
As with fname:vkGetQueryPoolResults, implementations must: guarantee that if
|
|
they return a non-zero availability value, then the numerical results are
|
|
valid.
|
|
|
|
If ename:VK_QUERY_RESULT_PARTIAL_BIT is set, ename:VK_QUERY_RESULT_WAIT_BIT
|
|
is not set, and the query's status is unavailable, an intermediate result
|
|
value between zero and the final result value is written for that query.
|
|
|
|
ename:VK_QUERY_RESULT_PARTIAL_BIT must: not be used if the pool's
|
|
pname:queryType is ename:VK_QUERY_TYPE_TIMESTAMP.
|
|
|
|
fname:vkCmdCopyQueryPoolResults is considered to be a transfer operation,
|
|
and its writes to buffer memory must: be synchronized using
|
|
ename:VK_PIPELINE_STAGE_TRANSFER_BIT and ename:VK_ACCESS_TRANSFER_WRITE_BIT
|
|
before using the results.
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdCopyQueryPoolResults-dstOffset-00819]]
|
|
pname:dstOffset must: be less than the size of pname:dstBuffer
|
|
* [[VUID-vkCmdCopyQueryPoolResults-firstQuery-00820]]
|
|
pname:firstQuery must: be less than the number of queries in
|
|
pname:queryPool
|
|
* [[VUID-vkCmdCopyQueryPoolResults-firstQuery-00821]]
|
|
The sum of pname:firstQuery and pname:queryCount must: be less than or
|
|
equal to the number of queries in pname:queryPool
|
|
* [[VUID-vkCmdCopyQueryPoolResults-flags-00822]]
|
|
If ename:VK_QUERY_RESULT_64_BIT is not set in pname:flags then
|
|
pname:dstOffset and pname:stride must: be multiples of `4`
|
|
* [[VUID-vkCmdCopyQueryPoolResults-flags-00823]]
|
|
If ename:VK_QUERY_RESULT_64_BIT is set in pname:flags then
|
|
pname:dstOffset and pname:stride must: be multiples of `8`
|
|
* [[VUID-vkCmdCopyQueryPoolResults-dstBuffer-00824]]
|
|
pname:dstBuffer must: have enough storage, from pname:dstOffset, to
|
|
contain the result of each query, as described
|
|
<<queries-operation-memorylayout,here>>
|
|
* [[VUID-vkCmdCopyQueryPoolResults-dstBuffer-00825]]
|
|
pname:dstBuffer must: have been created with
|
|
ename:VK_BUFFER_USAGE_TRANSFER_DST_BIT usage flag
|
|
* [[VUID-vkCmdCopyQueryPoolResults-dstBuffer-00826]]
|
|
If pname:dstBuffer is non-sparse then it must: be bound completely and
|
|
contiguously to a single sname:VkDeviceMemory object
|
|
* [[VUID-vkCmdCopyQueryPoolResults-queryType-00827]]
|
|
If the pname:queryType used to create pname:queryPool was
|
|
ename:VK_QUERY_TYPE_TIMESTAMP, pname:flags must: not contain
|
|
ename:VK_QUERY_RESULT_PARTIAL_BIT
|
|
****
|
|
|
|
include::../validity/protos/vkCmdCopyQueryPoolResults.txt[]
|
|
|
|
|
|
[[queries-operation-undefined]]
|
|
Rendering operations such as clears, MSAA resolves, attachment load/store
|
|
operations, and blits may: count towards the results of queries.
|
|
This behavior is implementation-dependent and may: vary depending on the
|
|
path used within an implementation.
|
|
For example, some implementations have several types of clears, some of
|
|
which may: include vertices and some not.
|
|
|
|
|
|
[[queries-occlusion]]
|
|
== Occlusion Queries
|
|
|
|
Occlusion queries track the number of samples that pass the per-fragment
|
|
tests for a set of drawing commands.
|
|
As such, occlusion queries are only available on queue families supporting
|
|
graphics operations.
|
|
The application can: then use these results to inform future rendering
|
|
decisions.
|
|
An occlusion query is begun and ended by calling fname:vkCmdBeginQuery and
|
|
fname:vkCmdEndQuery, respectively.
|
|
When an occlusion query begins, the count of passing samples always starts
|
|
at zero.
|
|
For each drawing command, the count is incremented as described in
|
|
<<fragops-samplecount,Sample Counting>>.
|
|
If pname:flags does not contain ename:VK_QUERY_CONTROL_PRECISE_BIT an
|
|
implementation may: generate any non-zero result value for the query if the
|
|
count of passing samples is non-zero.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
Not setting ename:VK_QUERY_CONTROL_PRECISE_BIT mode may: be more efficient
|
|
on some implementations, and should: be used where it is sufficient to know
|
|
a boolean result on whether any samples passed the per-fragment tests.
|
|
In this case, some implementations may: only return zero or one, indifferent
|
|
to the actual number of samples passing the per-fragment tests.
|
|
====
|
|
|
|
When an occlusion query finishes, the result for that query is marked as
|
|
available.
|
|
The application can: then either copy the result to a buffer (via
|
|
fname:vkCmdCopyQueryPoolResults) or request it be put into host memory (via
|
|
fname:vkGetQueryPoolResults).
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
If occluding geometry is not drawn first, samples can: pass the depth test,
|
|
but still not be visible in a final image.
|
|
====
|
|
|
|
|
|
[[queries-pipestats]]
|
|
== Pipeline Statistics Queries
|
|
|
|
Pipeline statistics queries allow the application to sample a specified set
|
|
of sname:VkPipeline counters.
|
|
These counters are accumulated by Vulkan for a set of either draw or
|
|
dispatch commands while a pipeline statistics query is active.
|
|
As such, pipeline statistics queries are available on queue families
|
|
supporting either graphics or compute operations.
|
|
Further, the availability of pipeline statistics queries is indicated by the
|
|
pname:pipelineStatisticsQuery member of the sname:VkPhysicalDeviceFeatures
|
|
object (see fname:vkGetPhysicalDeviceFeatures and fname:vkCreateDevice for
|
|
detecting and requesting this query type on a sname:VkDevice).
|
|
|
|
A pipeline statistics query is begun and ended by calling
|
|
fname:vkCmdBeginQuery and fname:vkCmdEndQuery, respectively.
|
|
When a pipeline statistics query begins, all statistics counters are set to
|
|
zero.
|
|
While the query is active, the pipeline type determines which set of
|
|
statistics are available, but these must: be configured on the query pool
|
|
when it is created.
|
|
If a statistic counter is issued on a command buffer that does not support
|
|
the corresponding operation, that counter is undefined after the query has
|
|
finished.
|
|
At least one statistic counter relevant to the operations supported on the
|
|
recording command buffer must: be enabled.
|
|
|
|
// refBegin VkQueryPipelineStatisticFlagBits Bitmask specifying queried pipeline statistics
|
|
|
|
Bits which can: be set to individually enable pipeline statistics counters
|
|
for query pools with slink:VkQueryPoolCreateInfo::pname:pipelineStatistics,
|
|
and for secondary command buffers with
|
|
slink:VkCommandBufferInheritanceInfo::pname:pipelineStatistics, are:
|
|
|
|
include::../api/enums/VkQueryPipelineStatisticFlagBits.txt[]
|
|
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_INPUT_ASSEMBLY_VERTICES_BIT specifies
|
|
that queries managed by the pool will count the number of vertices
|
|
processed by the <<drawing,input assembly>> stage.
|
|
Vertices corresponding to incomplete primitives may: contribute to the
|
|
count.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_INPUT_ASSEMBLY_PRIMITIVES_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
primitives processed by the <<drawing,input assembly>> stage.
|
|
If primitive restart is enabled, restarting the primitive topology has
|
|
no effect on the count.
|
|
Incomplete primitives may: be counted.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_VERTEX_SHADER_INVOCATIONS_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
vertex shader invocations.
|
|
This counter's value is incremented each time a vertex shader is
|
|
<<shaders-vertex-execution,invoked>>.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_GEOMETRY_SHADER_INVOCATIONS_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
geometry shader invocations.
|
|
This counter's value is incremented each time a geometry shader is
|
|
<<shaders-geometry-execution,invoked>>.
|
|
In the case of <<geometry-invocations,instanced geometry shaders>>, the
|
|
geometry shader invocations count is incremented for each separate
|
|
instanced invocation.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_GEOMETRY_SHADER_PRIMITIVES_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
primitives generated by geometry shader invocations.
|
|
The counter's value is incremented each time the geometry shader emits a
|
|
primitive.
|
|
Restarting primitive topology using the SPIR-V instructions
|
|
code:OpEndPrimitive or code:OpEndStreamPrimitive has no effect on the
|
|
geometry shader output primitives count.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_CLIPPING_INVOCATIONS_BIT specifies
|
|
that queries managed by the pool will count the number of primitives
|
|
processed by the <<vertexpostproc-clipping,Primitive Clipping>> stage of
|
|
the pipeline.
|
|
The counter's value is incremented each time a primitive reaches the
|
|
primitive clipping stage.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_CLIPPING_PRIMITIVES_BIT specifies that
|
|
queries managed by the pool will count the number of primitives output
|
|
by the <<vertexpostproc-clipping,Primitive Clipping>> stage of the
|
|
pipeline.
|
|
The counter's value is incremented each time a primitive passes the
|
|
primitive clipping stage.
|
|
The actual number of primitives output by the primitive clipping stage
|
|
for a particular input primitive is implementation-dependent but must:
|
|
satisfy the following conditions:
|
|
** If at least one vertex of the input primitive lies inside the clipping
|
|
volume, the counter is incremented by one or more.
|
|
** Otherwise, the counter is incremented by zero or more.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_FRAGMENT_SHADER_INVOCATIONS_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
fragment shader invocations.
|
|
The counter's value is incremented each time the fragment shader is
|
|
<<shaders-fragment-execution,invoked>>.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_TESSELLATION_CONTROL_SHADER_PATCHES_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
patches processed by the tessellation control shader.
|
|
The counter's value is incremented once for each patch for which a
|
|
tessellation control shader is
|
|
<<shaders-tessellation-control-execution,invoked>>.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_TESSELLATION_EVALUATION_SHADER_INVOCATIONS_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
invocations of the tessellation evaluation shader.
|
|
The counter's value is incremented each time the tessellation evaluation
|
|
shader is <<shaders-tessellation-evaluation-execution,invoked>>.
|
|
* ename:VK_QUERY_PIPELINE_STATISTIC_COMPUTE_SHADER_INVOCATIONS_BIT
|
|
specifies that queries managed by the pool will count the number of
|
|
compute shader invocations.
|
|
The counter's value is incremented every time the compute shader is
|
|
invoked.
|
|
Implementations may: skip the execution of certain compute shader
|
|
invocations or execute additional compute shader invocations for
|
|
implementation-dependent reasons as long as the results of rendering
|
|
otherwise remain unchanged.
|
|
|
|
These values are intended to measure relative statistics on one
|
|
implementation.
|
|
Various device architectures will count these values differently.
|
|
Any or all counters may: be affected by the issues described in
|
|
<<queries-operation-undefined,Query Operation>>.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
For example, tile-based rendering devices may: need to replay the scene
|
|
multiple times, affecting some of the counts.
|
|
====
|
|
|
|
If a pipeline has pname:rasterizerDiscardEnable enabled, implementations
|
|
may: discard primitives after the final vertex processing stage.
|
|
As a result, if pname:rasterizerDiscardEnable is enabled, the clipping input
|
|
and output primitives counters may: not be incremented.
|
|
|
|
When a pipeline statistics query finishes, the result for that query is
|
|
marked as available.
|
|
The application can: copy the result to a buffer (via
|
|
fname:vkCmdCopyQueryPoolResults), or request it be put into host memory (via
|
|
fname:vkGetQueryPoolResults).
|
|
|
|
// refEnd VkQueryPipelineStatisticFlagBits
|
|
|
|
|
|
[[queries-timestamps]]
|
|
== Timestamp Queries
|
|
|
|
_Timestamps_ provide applications with a mechanism for timing the execution
|
|
of commands.
|
|
A timestamp is an integer value generated by the sname:VkPhysicalDevice.
|
|
Unlike other queries, timestamps do not operate over a range, and so do not
|
|
use flink:vkCmdBeginQuery or flink:vkCmdEndQuery.
|
|
The mechanism is built around a set of commands that allow the application
|
|
to tell the sname:VkPhysicalDevice to write timestamp values to a
|
|
<<queries-pools,query pool>> and then either read timestamp values on the
|
|
host (using flink:vkGetQueryPoolResults) or copy timestamp values to a
|
|
sname:VkBuffer (using flink:vkCmdCopyQueryPoolResults).
|
|
The application can: then compute differences between timestamps to
|
|
determine execution time.
|
|
|
|
The number of valid bits in a timestamp value is determined by the
|
|
sname:VkQueueFamilyProperties::pname:timestampValidBits property of the
|
|
queue on which the timestamp is written.
|
|
Timestamps are supported on any queue which reports a non-zero value for
|
|
pname:timestampValidBits via flink:vkGetPhysicalDeviceQueueFamilyProperties.
|
|
If the <<features-limits-timestampComputeAndGraphics,
|
|
pname:timestampComputeAndGraphics>> limit is ename:VK_TRUE, timestamps are
|
|
supported by every queue family that supports either graphics or compute
|
|
operations (see slink:VkQueueFamilyProperties).
|
|
|
|
The number of nanoseconds it takes for a timestamp value to be incremented
|
|
by 1 can: be obtained from
|
|
sname:VkPhysicalDeviceLimits::pname:timestampPeriod after a call to
|
|
fname:vkGetPhysicalDeviceProperties.
|
|
|
|
// refBegin vkCmdWriteTimestamp Write a device timestamp into a query object
|
|
|
|
To request a timestamp, call:
|
|
|
|
include::../api/protos/vkCmdWriteTimestamp.txt[]
|
|
|
|
* pname:commandBuffer is the command buffer into which the command will be
|
|
recorded.
|
|
* pname:pipelineStage is one of the elink:VkPipelineStageFlagBits,
|
|
specifying a stage of the pipeline.
|
|
* pname:queryPool is the query pool that will manage the timestamp.
|
|
* pname:query is the query within the query pool that will contain the
|
|
timestamp.
|
|
|
|
fname:vkCmdWriteTimestamp latches the value of the timer when all previous
|
|
commands have completed executing as far as the specified pipeline stage,
|
|
and writes the timestamp value to memory.
|
|
When the timestamp value is written, the availability status of the query is
|
|
set to available.
|
|
|
|
[NOTE]
|
|
.Note
|
|
====
|
|
If an implementation is unable to detect completion and latch the timer at
|
|
any specific stage of the pipeline, it may: instead do so at any logically
|
|
later stage.
|
|
====
|
|
|
|
flink:vkCmdCopyQueryPoolResults can: then be called to copy the timestamp
|
|
value from the query pool into buffer memory, with ordering and
|
|
synchronization behavior equivalent to how other queries operate.
|
|
Timestamp values can: also be retrieved from the query pool using
|
|
flink:vkGetQueryPoolResults.
|
|
As with other queries, the query must: be reset using
|
|
flink:vkCmdResetQueryPool before requesting the timestamp value be written
|
|
to it.
|
|
|
|
While fname:vkCmdWriteTimestamp can: be called inside or outside of a render
|
|
pass instance, flink:vkCmdCopyQueryPoolResults must: only be called outside
|
|
of a render pass instance.
|
|
|
|
ifdef::VK_KHX_multiview[]
|
|
|
|
If fname:vkCmdWriteTimestamp is called while executing a render pass
|
|
instance that has multiview enabled, the timestamp uses [eq]#N# consecutive
|
|
query indices in the query pool (starting at pname:query) where [eq]#N# is
|
|
the number of bits set in the view mask of the subpass the command is
|
|
executed in.
|
|
The resulting query values are determined by an implementation-dependent
|
|
choice of one of the following behaviors:
|
|
|
|
* The first query is a timestamp value and (if more than one bit is set in
|
|
the view mask) zero is written to the remaining queries.
|
|
If two timestamps are written in the same subpass, the sum of the
|
|
execution time of all views between those commands is the difference
|
|
between the first query written by each command.
|
|
* All [eq]#N# queries are timestamp values.
|
|
If two timestamps are written in the same subpass, the sum of the
|
|
execution time of all views between those commands is the sum of the
|
|
difference between corresponding queries written by each command.
|
|
The difference between corresponding queries may: be the execution time
|
|
of a single view.
|
|
|
|
In either case, the application can: sum the differences between all [eq]#N#
|
|
queries to determine the total execution time.
|
|
|
|
endif::VK_KHX_multiview[]
|
|
|
|
.Valid Usage
|
|
****
|
|
* [[VUID-vkCmdWriteTimestamp-queryPool-00828]]
|
|
The query identified by pname:queryPool and pname:query must: be
|
|
_unavailable_
|
|
* [[VUID-vkCmdWriteTimestamp-timestampValidBits-00829]]
|
|
The command pool's queue family must: support a non-zero
|
|
pname:timestampValidBits
|
|
ifdef::VK_KHX_multiview[]
|
|
* [[VUID-vkCmdWriteTimestamp-None-00830]]
|
|
All queries used by the command must: be unavailable
|
|
* [[VUID-vkCmdWriteTimestamp-query-00831]]
|
|
If fname:vkCmdWriteTimestamp is called within a render pass instance,
|
|
the sum of pname:query and the number of bits set in the current
|
|
subpass's view mask must: be less than or equal to the number of queries
|
|
in pname:queryPool
|
|
endif::VK_KHX_multiview[]
|
|
****
|
|
|
|
include::../validity/protos/vkCmdWriteTimestamp.txt[]
|