// Copyright (c) 2015-2017 The Khronos Group Inc. // Copyright notice at https://www.khronos.org/registry/speccopyright.html [[queries]] = Queries _Queries_ provide a mechanism to return information about the processing of a sequence of Vulkan commands. Query operations are asynchronous, and as such, their results are not returned immediately. Instead, their results, and their availability status, are stored in a <>. The state of these queries can: be read back on the host, or copied to a buffer object on the device. The supported query types are <>, <>, and <>. [[queries-pools]] == Query Pools // refBegin VkQueryPool Opaque handle to a query pool object Queries are managed using _query pool_ objects. Each query pool is a collection of a specific number of queries of a particular type. Query pools are represented by sname:VkQueryPool handles: include::../api/handles/VkQueryPool.txt[] // refEnd VkQueryPool // refBegin vkCreateQueryPool Create a new query pool object To create a query pool, call: include::../api/protos/vkCreateQueryPool.txt[] * pname:device is the logical device that creates the query pool. * pname:pCreateInfo is a pointer to an instance of the sname:VkQueryPoolCreateInfo structure containing the number and type of queries to be managed by the pool. * pname:pAllocator controls host memory allocation as described in the <> chapter. * pname:pQueryPool is a pointer to a sname:VkQueryPool handle in which the resulting query pool object is returned. include::../validity/protos/vkCreateQueryPool.txt[] // refBegin VkQueryPoolCreateInfo Structure specifying parameters of a newly created query pool The sname:VkQueryPoolCreateInfo structure is defined as: include::../api/structs/VkQueryPoolCreateInfo.txt[] * pname:sType is the type of this structure. * pname:pNext is `NULL` or a pointer to an extension-specific structure. * pname:flags is reserved for future use. * pname:queryType is a elink:VkQueryType value specifying the type of queries managed by the pool. * pname:queryCount is the number of queries managed by the pool. * pname:pipelineStatistics is a bitmask of elink:VkQueryPipelineStatisticFlagBits specifying which counters will be returned in queries on the new pool, as described below in <>. pname:pipelineStatistics is ignored if pname:queryType is not ename:VK_QUERY_TYPE_PIPELINE_STATISTICS. .Valid Usage **** * [[VUID-VkQueryPoolCreateInfo-queryType-00791]] If the <> feature is not enabled, pname:queryType must: not be ename:VK_QUERY_TYPE_PIPELINE_STATISTICS * [[VUID-VkQueryPoolCreateInfo-queryType-00792]] If pname:queryType is ename:VK_QUERY_TYPE_PIPELINE_STATISTICS, pname:pipelineStatistics must: be a valid combination of elink:VkQueryPipelineStatisticFlagBits values **** include::../validity/structs/VkQueryPoolCreateInfo.txt[] // refBegin vkDestroyQueryPool Destroy a query pool object To destroy a query pool, call: include::../api/protos/vkDestroyQueryPool.txt[] * pname:device is the logical device that destroys the query pool. * pname:queryPool is the query pool to destroy. * pname:pAllocator controls host memory allocation as described in the <> chapter. .Valid Usage **** * [[VUID-vkDestroyQueryPool-queryPool-00793]] All submitted commands that refer to pname:queryPool must: have completed execution * [[VUID-vkDestroyQueryPool-queryPool-00794]] If sname:VkAllocationCallbacks were provided when pname:queryPool was created, a compatible set of callbacks must: be provided here * [[VUID-vkDestroyQueryPool-queryPool-00795]] If no sname:VkAllocationCallbacks were provided when pname:queryPool was created, pname:pAllocator must: be `NULL` **** include::../validity/protos/vkDestroyQueryPool.txt[] // refBegin VkQueryType Specify the type of queries managed by a query pool Possible values of slink:VkQueryPoolCreateInfo::pname:queryType, specifying the type of queries managed by the pool, are: include::../api/enums/VkQueryType.txt[] * ename:VK_QUERY_TYPE_OCCLUSION specifies an <>. * ename:VK_QUERY_TYPE_PIPELINE_STATISTICS specifies a <>. * ename:VK_QUERY_TYPE_TIMESTAMP specifies a <>. // refEnd VkQueryType [[queries-operation]] == Query Operation The operation of queries is controlled by the commands flink:vkCmdBeginQuery, flink:vkCmdEndQuery, flink:vkCmdResetQueryPool, flink:vkCmdCopyQueryPoolResults, and flink:vkCmdWriteTimestamp. In order for a sname:VkCommandBuffer to record query management commands, the queue family for which its sname:VkCommandPool was created must: support the appropriate type of operations (graphics, compute) suitable for the query type of a given query pool. Each query in a query pool has a status that is either _unavailable_ or _available_, and also has state to store the numerical results of a query operation of the type requested when the query pool was created. Resetting a query via flink:vkCmdResetQueryPool sets the status to unavailable and makes the numerical results undefined. Performing a query operation with flink:vkCmdBeginQuery and flink:vkCmdEndQuery changes the status to available when the query <>, and updates the numerical results. Both the availability status and numerical results are retrieved by calling either flink:vkGetQueryPoolResults or flink:vkCmdCopyQueryPoolResults. [[queries-order]] Query commands, for the same query and submitted to the same queue, execute in their entirety in <>, relative to each other. In effect there is an implicit execution dependency from each such query command to all query command previously submitted to the same queue. There is one significant exception to this; if the pname:flags parameter of flink:vkCmdCopyQueryPoolResults does not include ename:VK_QUERY_RESULT_WAIT_BIT, execution of flink:vkCmdCopyQueryPoolResults may: happen-before the results of flink:vkCmdEndQuery are available. After query pool creation, each query is in an undefined state and must: be reset prior to use. Queries must: also be reset between uses. Using a query that has not been reset will result in undefined behavior. ifdef::VK_KHX_device_group[] If a logical device includes multiple physical devices, then each command that writes a query must: execute on a single physical device, and any call to flink:vkCmdBeginQuery must: execute the corresponding flink:vkCmdEndQuery command on the same physical device. endif::VK_KHX_device_group[] // refBegin vkCmdResetQueryPool Reset queries in a query pool To reset a range of queries in a query pool, call: include::../api/protos/vkCmdResetQueryPool.txt[] * pname:commandBuffer is the command buffer into which this command will be recorded. * pname:queryPool is the handle of the query pool managing the queries being reset. * pname:firstQuery is the initial query index to reset. * pname:queryCount is the number of queries to reset. When executed on a queue, this command sets the status of query indices [eq]#[pname:firstQuery, pname:firstQuery {plus} pname:queryCount - 1]# to unavailable. .Valid Usage **** * [[VUID-vkCmdResetQueryPool-firstQuery-00796]] pname:firstQuery must: be less than the number of queries in pname:queryPool * [[VUID-vkCmdResetQueryPool-firstQuery-00797]] The sum of pname:firstQuery and pname:queryCount must: be less than or equal to the number of queries in pname:queryPool **** include::../validity/protos/vkCmdResetQueryPool.txt[] Once queries are reset and ready for use, query commands can: be issued to a command buffer. Occlusion queries and pipeline statistics queries count events - drawn samples and pipeline stage invocations, respectively - resulting from commands that are recorded between a flink:vkCmdBeginQuery command and a flink:vkCmdEndQuery command within a specified command buffer, effectively scoping a set of drawing and/or compute commands. Timestamp queries write timestamps to a query pool. A query must: begin and end in the same command buffer, although if it is a primary command buffer, and the <> feature is enabled, it can: execute secondary command buffers during the query operation. For a secondary command buffer to be executed while a query is active, it must: set the pname:occlusionQueryEnable, pname:queryFlags, and/or pname:pipelineStatistics members of slink:VkCommandBufferInheritanceInfo to conservative values, as described in the <> section. A query must: either begin and end inside the same subpass of a render pass instance, or must: both begin and end outside of a render pass instance (i.e. contain entire render pass instances). ifdef::VK_KHX_multiview[] If queries are used while executing a render pass instance that has multiview enabled, the query uses [eq]#N# consecutive query indices in the query pool (starting at pname:query) where [eq]#N# is the number of bits set in the view mask in the subpass the query is used in. How the numerical results of the query are distributed among the queries is implementation-dependent. For example, some implementations may: write each view's results to a distinct query, while other implementations may: write the total result to the first query and write zero to the other queries. However, the sum of the results in all the queries must: accurately reflect the total result of the query summed over all views. Applications can: sum the results from all the queries to compute the total result. Queries used with multiview rendering must: not span subpasses, i.e. they must: begin and end in the same subpass. endif::VK_KHX_multiview[] // refBegin vkCmdBeginQuery Begin a query To begin a query, call: include::../api/protos/vkCmdBeginQuery.txt[] * pname:commandBuffer is the command buffer into which this command will be recorded. * pname:queryPool is the query pool that will manage the results of the query. * pname:query is the query index within the query pool that will contain the results. * pname:flags is a bitmask of elink:VkQueryControlFlagBits specifying constraints on the types of queries that can: be performed. If the pname:queryType of the pool is ename:VK_QUERY_TYPE_OCCLUSION and pname:flags contains ename:VK_QUERY_CONTROL_PRECISE_BIT, an implementation must: return a result that matches the actual number of samples passed. This is described in more detail in <>. [[queries-operation-active]] After beginning a query, that query is considered _active_ within the command buffer it was called in until that same query is ended. Queries active in a primary command buffer when secondary command buffers are executed are considered active for those secondary command buffers. .Valid Usage **** * [[VUID-vkCmdBeginQuery-queryPool-00798]] The query identified by pname:queryPool and pname:query must: currently not be <> * [[VUID-vkCmdBeginQuery-queryPool-00799]] The query identified by pname:queryPool and pname:query must: be unavailable * [[VUID-vkCmdBeginQuery-queryType-00800]] If the <> feature is not enabled, or the pname:queryType used to create pname:queryPool was not ename:VK_QUERY_TYPE_OCCLUSION, pname:flags must: not contain ename:VK_QUERY_CONTROL_PRECISE_BIT * [[VUID-vkCmdBeginQuery-queryPool-00801]] pname:queryPool must: have been created with a pname:queryType that differs from that of any other queries that have been made <>, and are currently still active within pname:commandBuffer * [[VUID-vkCmdBeginQuery-query-00802]] pname:query must: be less than the number of queries in pname:queryPool * [[VUID-vkCmdBeginQuery-queryType-00803]] If the pname:queryType used to create pname:queryPool was ename:VK_QUERY_TYPE_OCCLUSION, the sname:VkCommandPool that pname:commandBuffer was allocated from must: support graphics operations * [[VUID-vkCmdBeginQuery-queryType-00804]] If the pname:queryType used to create pname:queryPool was ename:VK_QUERY_TYPE_PIPELINE_STATISTICS and any of the pname:pipelineStatistics indicate graphics operations, the sname:VkCommandPool that pname:commandBuffer was allocated from must: support graphics operations * [[VUID-vkCmdBeginQuery-queryType-00805]] If the pname:queryType used to create pname:queryPool was ename:VK_QUERY_TYPE_PIPELINE_STATISTICS and any of the pname:pipelineStatistics indicate compute operations, the sname:VkCommandPool that pname:commandBuffer was allocated from must: support compute operations ifdef::VK_KHX_multiview[] * [[VUID-vkCmdBeginQuery-None-00806]] All queries used by the command must: not be active * [[VUID-vkCmdBeginQuery-None-00807]] All queries used by the command must: be unavailable * [[VUID-vkCmdBeginQuery-query-00808]] If fname:vkCmdBeginQuery is called within a render pass instance, the sum of pname:query and the number of bits set in the current subpass's view mask must: be less than or equal to the number of queries in pname:queryPool endif::VK_KHX_multiview[] **** include::../validity/protos/vkCmdBeginQuery.txt[] // refBegin VkQueryControlFlagBits Bitmask specifying constraints on a query Bits which can: be set in flink:vkCmdBeginQuery::pname:flags, specifying constraints on the types of queries that can: be performed, are: include::../api/enums/VkQueryControlFlagBits.txt[] * ename:VK_QUERY_CONTROL_PRECISE_BIT specifies the precision of <>. // refEnd VkQueryControlFlagBits // refBegin vkCmdEndQuery Ends a query To end a query after the set of desired draw or dispatch commands is executed, call: include::../api/protos/vkCmdEndQuery.txt[] * pname:commandBuffer is the command buffer into which this command will be recorded. * pname:queryPool is the query pool that is managing the results of the query. * pname:query is the query index within the query pool where the result is stored. [[queries-operation-finished]] As queries operate asynchronously, ending a query does not immediately set the query's status to available. A query is considered _finished_ when the final results of the query are ready to be retrieved by flink:vkGetQueryPoolResults and flink:vkCmdCopyQueryPoolResults, and this is when the query's status is set to available. Once a query is ended the query must: finish in finite time, unless the state of the query is changed using other commands, e.g. by issuing a reset of the query. .Valid Usage **** * [[VUID-vkCmdEndQuery-queryPool-00809]] The query identified by pname:queryPool and pname:query must: currently be <> * [[VUID-vkCmdEndQuery-query-00810]] pname:query must: be less than the number of queries in pname:queryPool ifdef::VK_KHX_multiview[] * [[VUID-vkCmdEndQuery-None-00811]] All queries used by the command must: be active * [[VUID-vkCmdEndQuery-query-00812]] If fname:vkCmdEndQuery is called within a render pass instance, the sum of pname:query and the number of bits set in the current subpass's view mask must: be less than or equal to the number of queries in pname:queryPool endif::VK_KHX_multiview[] **** include::../validity/protos/vkCmdEndQuery.txt[] [[queries-operation-memorylayout]] An application can: retrieve results either by requesting they be written into application-provided memory, or by requesting they be copied into a sname:VkBuffer. In either case, the layout in memory is defined as follows: * The first query's result is written starting at the first byte requested by the command, and each subsequent query's result begins pname:stride bytes later. * Each query's result is a tightly packed array of unsigned integers, either 32- or 64-bits as requested by the command, storing the numerical results and, if requested, the availability status. * If ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is used, the final element of each query's result is an integer indicating whether the query's result is available, with any non-zero value indicating that it is available. * Occlusion queries write one integer value - the number of samples passed. Pipeline statistics queries write one integer value for each bit that is enabled in the pname:pipelineStatistics when the pool is created, and the statistics values are written in bit order starting from the least significant bit. Timestamps write one integer value. * If more than one query is retrieved and pname:stride is not at least as large as the size of the array of integers corresponding to a single query, the values written to memory are undefined. // refBegin vkGetQueryPoolResults Copy results of queries in a query pool to a host memory region To retrieve status and results for a set of queries, call: include::../api/protos/vkGetQueryPoolResults.txt[] * pname:device is the logical device that owns the query pool. * pname:queryPool is the query pool managing the queries containing the desired results. * pname:firstQuery is the initial query index. * pname:queryCount is the number of queries. pname:firstQuery and pname:queryCount together define a range of queries. For pipeline statistics queries, each query index in the pool contains one integer value for each bit that is enabled in slink:VkQueryPoolCreateInfo::pname:pipelineStatistics when the pool is created. * pname:dataSize is the size in bytes of the buffer pointed to by pname:pData. * pname:pData is a pointer to a user-allocated buffer where the results will be written * pname:stride is the stride in bytes between results for individual queries within pname:pData. * pname:flags is a bitmask of elink:VkQueryResultFlagBits specifying how and when results are returned. If no bits are set in pname:flags, and all requested queries are in the available state, results are written as an array of 32-bit unsigned integer values. The behavior when not all queries are available, is described <>. If ename:VK_QUERY_RESULT_64_BIT is not set and the result overflows a 32-bit value, the value may: either wrap or saturate. Similarly, if ename:VK_QUERY_RESULT_64_BIT is set and the result overflows a 64-bit value, the value may: either wrap or saturate. If ename:VK_QUERY_RESULT_WAIT_BIT is set, Vulkan will wait for each query to be in the available state before retrieving the numerical results for that query. In this case, fname:vkGetQueryPoolResults is guaranteed to succeed and return ename:VK_SUCCESS if the queries become available in a finite time (i.e. if they have been issued and not reset). If queries will never finish (e.g. due to being reset but not issued), then fname:vkGetQueryPoolResults may: not return in finite time. [[queries-wait-bit-not-set]] If ename:VK_QUERY_RESULT_WAIT_BIT and ename:VK_QUERY_RESULT_PARTIAL_BIT are both not set then no result values are written to pname:pData for queries that are in the unavailable state at the time of the call, and fname:vkGetQueryPoolResults returns ename:VK_NOT_READY. However, availability state is still written to pname:pData for those queries if ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set. [NOTE] .Note ==== Applications must: take care to ensure that use of the ename:VK_QUERY_RESULT_WAIT_BIT bit has the desired effect. For example, if a query has been used previously and a command buffer records the commands fname:vkCmdResetQueryPool, fname:vkCmdBeginQuery, and fname:vkCmdEndQuery for that query, then the query will remain in the available state until the fname:vkCmdResetQueryPool command executes on a queue. Applications can: use fences or events to ensure that a query has already been reset before checking for its results or availability status. Otherwise, a stale value could be returned from a previous use of the query. The above also applies when ename:VK_QUERY_RESULT_WAIT_BIT is used in combination with ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT. In this case, the returned availability status may: reflect the result of a previous use of the query unless the fname:vkCmdResetQueryPool command has been executed since the last use of the query. ==== [NOTE] .Note ==== Applications can: double-buffer query pool usage, with a pool per frame, and reset queries at the end of the frame in which they are read. ==== If ename:VK_QUERY_RESULT_PARTIAL_BIT is set, ename:VK_QUERY_RESULT_WAIT_BIT is not set, and the query's status is unavailable, an intermediate result value between zero and the final result value is written to pname:pData for that query. ename:VK_QUERY_RESULT_PARTIAL_BIT must: not be used if the pool's pname:queryType is ename:VK_QUERY_TYPE_TIMESTAMP. If ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set, the final integer value written for each query is non-zero if the query's status was available or zero if the status was unavailable. When ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is used, implementations must: guarantee that if they return a non-zero availability value then the numerical results must: be valid, assuming the results are not reset by a subsequent command. [NOTE] .Note ==== Satisfying this guarantee may: require careful ordering by the application, e.g. to read the availability status before reading the results. ==== .Valid Usage **** * [[VUID-vkGetQueryPoolResults-firstQuery-00813]] pname:firstQuery must: be less than the number of queries in pname:queryPool * [[VUID-vkGetQueryPoolResults-flags-00814]] If ename:VK_QUERY_RESULT_64_BIT is not set in pname:flags then pname:pData and pname:stride must: be multiples of `4` * [[VUID-vkGetQueryPoolResults-flags-00815]] If ename:VK_QUERY_RESULT_64_BIT is set in pname:flags then pname:pData and pname:stride must: be multiples of `8` * [[VUID-vkGetQueryPoolResults-firstQuery-00816]] The sum of pname:firstQuery and pname:queryCount must: be less than or equal to the number of queries in pname:queryPool * [[VUID-vkGetQueryPoolResults-dataSize-00817]] pname:dataSize must: be large enough to contain the result of each query, as described <> * [[VUID-vkGetQueryPoolResults-queryType-00818]] If the pname:queryType used to create pname:queryPool was ename:VK_QUERY_TYPE_TIMESTAMP, pname:flags must: not contain ename:VK_QUERY_RESULT_PARTIAL_BIT **** include::../validity/protos/vkGetQueryPoolResults.txt[] // refBegin VkQueryResultFlagBits Bitmask specifying how and when query results are returned Bits which can: be set in flink:vkGetQueryPoolResults::pname:flags and flink:vkCmdCopyQueryPoolResults::pname:flags, specifying how and when results are returned, are: include::../api/enums/VkQueryResultFlagBits.txt[] * ename:VK_QUERY_RESULT_64_BIT specifies the results will be written as an array of 64-bit unsigned integer values. If this bit is not set, the results will be written as an array of 32-bit unsigned integer values. * ename:VK_QUERY_RESULT_WAIT_BIT specifies that Vulkan will wait for each query's status to become available before retrieving its results. * ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT specifies that the availability status accompanies the results. * ename:VK_QUERY_RESULT_PARTIAL_BIT specifies that returning partial results is acceptable. // refEnd VkQueryResultFlagBits // refBegin vkCmdCopyQueryPoolResults Copy the results of queries in a query pool to a buffer object To copy query statuses and numerical results directly to buffer memory, call: include::../api/protos/vkCmdCopyQueryPoolResults.txt[] * pname:commandBuffer is the command buffer into which this command will be recorded. * pname:queryPool is the query pool managing the queries containing the desired results. * pname:firstQuery is the initial query index. * pname:queryCount is the number of queries. pname:firstQuery and pname:queryCount together define a range of queries. * pname:dstBuffer is a sname:VkBuffer object that will receive the results of the copy command. * pname:dstOffset is an offset into pname:dstBuffer. * pname:stride is the stride in bytes between results for individual queries within pname:dstBuffer. The required size of the backing memory for pname:dstBuffer is determined as described above for flink:vkGetQueryPoolResults. * pname:flags is a bitmask of elink:VkQueryResultFlagBits specifying how and when results are returned. fname:vkCmdCopyQueryPoolResults is guaranteed to see the effect of previous uses of fname:vkCmdResetQueryPool in the same queue, without any additional synchronization. Thus, the results will always reflect the most recent use of the query. pname:flags has the same possible values described above for the pname:flags parameter of flink:vkGetQueryPoolResults, but the different style of execution causes some subtle behavioral differences. Because fname:vkCmdCopyQueryPoolResults executes in order with respect to other query commands, there is less ambiguity about which use of a query is being requested. If no bits are set in pname:flags, results for all requested queries in the available state are written as 32-bit unsigned integer values, and nothing is written for queries in the unavailable state. If ename:VK_QUERY_RESULT_64_BIT is set, the results are written as an array of 64-bit unsigned integer values as described for flink:vkGetQueryPoolResults. If ename:VK_QUERY_RESULT_WAIT_BIT is set, the implementation will wait for each query's status to be in the available state before retrieving the numerical results for that query. This is guaranteed to reflect the most recent use of the query on the same queue, assuming that the query is not being simultaneously used by other queues. If the query does not become available in a finite amount of time (e.g. due to not issuing a query since the last reset), a ename:VK_ERROR_DEVICE_LOST error may: occur. Similarly, if ename:VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set and ename:VK_QUERY_RESULT_WAIT_BIT is not set, the availability is guaranteed to reflect the most recent use of the query on the same queue, assuming that the query is not being simultaneously used by other queues. As with fname:vkGetQueryPoolResults, implementations must: guarantee that if they return a non-zero availability value, then the numerical results are valid. If ename:VK_QUERY_RESULT_PARTIAL_BIT is set, ename:VK_QUERY_RESULT_WAIT_BIT is not set, and the query's status is unavailable, an intermediate result value between zero and the final result value is written for that query. ename:VK_QUERY_RESULT_PARTIAL_BIT must: not be used if the pool's pname:queryType is ename:VK_QUERY_TYPE_TIMESTAMP. fname:vkCmdCopyQueryPoolResults is considered to be a transfer operation, and its writes to buffer memory must: be synchronized using ename:VK_PIPELINE_STAGE_TRANSFER_BIT and ename:VK_ACCESS_TRANSFER_WRITE_BIT before using the results. .Valid Usage **** * [[VUID-vkCmdCopyQueryPoolResults-dstOffset-00819]] pname:dstOffset must: be less than the size of pname:dstBuffer * [[VUID-vkCmdCopyQueryPoolResults-firstQuery-00820]] pname:firstQuery must: be less than the number of queries in pname:queryPool * [[VUID-vkCmdCopyQueryPoolResults-firstQuery-00821]] The sum of pname:firstQuery and pname:queryCount must: be less than or equal to the number of queries in pname:queryPool * [[VUID-vkCmdCopyQueryPoolResults-flags-00822]] If ename:VK_QUERY_RESULT_64_BIT is not set in pname:flags then pname:dstOffset and pname:stride must: be multiples of `4` * [[VUID-vkCmdCopyQueryPoolResults-flags-00823]] If ename:VK_QUERY_RESULT_64_BIT is set in pname:flags then pname:dstOffset and pname:stride must: be multiples of `8` * [[VUID-vkCmdCopyQueryPoolResults-dstBuffer-00824]] pname:dstBuffer must: have enough storage, from pname:dstOffset, to contain the result of each query, as described <> * [[VUID-vkCmdCopyQueryPoolResults-dstBuffer-00825]] pname:dstBuffer must: have been created with ename:VK_BUFFER_USAGE_TRANSFER_DST_BIT usage flag * [[VUID-vkCmdCopyQueryPoolResults-dstBuffer-00826]] If pname:dstBuffer is non-sparse then it must: be bound completely and contiguously to a single sname:VkDeviceMemory object * [[VUID-vkCmdCopyQueryPoolResults-queryType-00827]] If the pname:queryType used to create pname:queryPool was ename:VK_QUERY_TYPE_TIMESTAMP, pname:flags must: not contain ename:VK_QUERY_RESULT_PARTIAL_BIT **** include::../validity/protos/vkCmdCopyQueryPoolResults.txt[] [[queries-operation-undefined]] Rendering operations such as clears, MSAA resolves, attachment load/store operations, and blits may: count towards the results of queries. This behavior is implementation-dependent and may: vary depending on the path used within an implementation. For example, some implementations have several types of clears, some of which may: include vertices and some not. [[queries-occlusion]] == Occlusion Queries Occlusion queries track the number of samples that pass the per-fragment tests for a set of drawing commands. As such, occlusion queries are only available on queue families supporting graphics operations. The application can: then use these results to inform future rendering decisions. An occlusion query is begun and ended by calling fname:vkCmdBeginQuery and fname:vkCmdEndQuery, respectively. When an occlusion query begins, the count of passing samples always starts at zero. For each drawing command, the count is incremented as described in <>. If pname:flags does not contain ename:VK_QUERY_CONTROL_PRECISE_BIT an implementation may: generate any non-zero result value for the query if the count of passing samples is non-zero. [NOTE] .Note ==== Not setting ename:VK_QUERY_CONTROL_PRECISE_BIT mode may: be more efficient on some implementations, and should: be used where it is sufficient to know a boolean result on whether any samples passed the per-fragment tests. In this case, some implementations may: only return zero or one, indifferent to the actual number of samples passing the per-fragment tests. ==== When an occlusion query finishes, the result for that query is marked as available. The application can: then either copy the result to a buffer (via fname:vkCmdCopyQueryPoolResults) or request it be put into host memory (via fname:vkGetQueryPoolResults). [NOTE] .Note ==== If occluding geometry is not drawn first, samples can: pass the depth test, but still not be visible in a final image. ==== [[queries-pipestats]] == Pipeline Statistics Queries Pipeline statistics queries allow the application to sample a specified set of sname:VkPipeline counters. These counters are accumulated by Vulkan for a set of either draw or dispatch commands while a pipeline statistics query is active. As such, pipeline statistics queries are available on queue families supporting either graphics or compute operations. Further, the availability of pipeline statistics queries is indicated by the pname:pipelineStatisticsQuery member of the sname:VkPhysicalDeviceFeatures object (see fname:vkGetPhysicalDeviceFeatures and fname:vkCreateDevice for detecting and requesting this query type on a sname:VkDevice). A pipeline statistics query is begun and ended by calling fname:vkCmdBeginQuery and fname:vkCmdEndQuery, respectively. When a pipeline statistics query begins, all statistics counters are set to zero. While the query is active, the pipeline type determines which set of statistics are available, but these must: be configured on the query pool when it is created. If a statistic counter is issued on a command buffer that does not support the corresponding operation, that counter is undefined after the query has finished. At least one statistic counter relevant to the operations supported on the recording command buffer must: be enabled. // refBegin VkQueryPipelineStatisticFlagBits Bitmask specifying queried pipeline statistics Bits which can: be set to individually enable pipeline statistics counters for query pools with slink:VkQueryPoolCreateInfo::pname:pipelineStatistics, and for secondary command buffers with slink:VkCommandBufferInheritanceInfo::pname:pipelineStatistics, are: include::../api/enums/VkQueryPipelineStatisticFlagBits.txt[] * ename:VK_QUERY_PIPELINE_STATISTIC_INPUT_ASSEMBLY_VERTICES_BIT specifies that queries managed by the pool will count the number of vertices processed by the <> stage. Vertices corresponding to incomplete primitives may: contribute to the count. * ename:VK_QUERY_PIPELINE_STATISTIC_INPUT_ASSEMBLY_PRIMITIVES_BIT specifies that queries managed by the pool will count the number of primitives processed by the <> stage. If primitive restart is enabled, restarting the primitive topology has no effect on the count. Incomplete primitives may: be counted. * ename:VK_QUERY_PIPELINE_STATISTIC_VERTEX_SHADER_INVOCATIONS_BIT specifies that queries managed by the pool will count the number of vertex shader invocations. This counter's value is incremented each time a vertex shader is <>. * ename:VK_QUERY_PIPELINE_STATISTIC_GEOMETRY_SHADER_INVOCATIONS_BIT specifies that queries managed by the pool will count the number of geometry shader invocations. This counter's value is incremented each time a geometry shader is <>. In the case of <>, the geometry shader invocations count is incremented for each separate instanced invocation. * ename:VK_QUERY_PIPELINE_STATISTIC_GEOMETRY_SHADER_PRIMITIVES_BIT specifies that queries managed by the pool will count the number of primitives generated by geometry shader invocations. The counter's value is incremented each time the geometry shader emits a primitive. Restarting primitive topology using the SPIR-V instructions code:OpEndPrimitive or code:OpEndStreamPrimitive has no effect on the geometry shader output primitives count. * ename:VK_QUERY_PIPELINE_STATISTIC_CLIPPING_INVOCATIONS_BIT specifies that queries managed by the pool will count the number of primitives processed by the <> stage of the pipeline. The counter's value is incremented each time a primitive reaches the primitive clipping stage. * ename:VK_QUERY_PIPELINE_STATISTIC_CLIPPING_PRIMITIVES_BIT specifies that queries managed by the pool will count the number of primitives output by the <> stage of the pipeline. The counter's value is incremented each time a primitive passes the primitive clipping stage. The actual number of primitives output by the primitive clipping stage for a particular input primitive is implementation-dependent but must: satisfy the following conditions: ** If at least one vertex of the input primitive lies inside the clipping volume, the counter is incremented by one or more. ** Otherwise, the counter is incremented by zero or more. * ename:VK_QUERY_PIPELINE_STATISTIC_FRAGMENT_SHADER_INVOCATIONS_BIT specifies that queries managed by the pool will count the number of fragment shader invocations. The counter's value is incremented each time the fragment shader is <>. * ename:VK_QUERY_PIPELINE_STATISTIC_TESSELLATION_CONTROL_SHADER_PATCHES_BIT specifies that queries managed by the pool will count the number of patches processed by the tessellation control shader. The counter's value is incremented once for each patch for which a tessellation control shader is <>. * ename:VK_QUERY_PIPELINE_STATISTIC_TESSELLATION_EVALUATION_SHADER_INVOCATIONS_BIT specifies that queries managed by the pool will count the number of invocations of the tessellation evaluation shader. The counter's value is incremented each time the tessellation evaluation shader is <>. * ename:VK_QUERY_PIPELINE_STATISTIC_COMPUTE_SHADER_INVOCATIONS_BIT specifies that queries managed by the pool will count the number of compute shader invocations. The counter's value is incremented every time the compute shader is invoked. Implementations may: skip the execution of certain compute shader invocations or execute additional compute shader invocations for implementation-dependent reasons as long as the results of rendering otherwise remain unchanged. These values are intended to measure relative statistics on one implementation. Various device architectures will count these values differently. Any or all counters may: be affected by the issues described in <>. [NOTE] .Note ==== For example, tile-based rendering devices may: need to replay the scene multiple times, affecting some of the counts. ==== If a pipeline has pname:rasterizerDiscardEnable enabled, implementations may: discard primitives after the final vertex processing stage. As a result, if pname:rasterizerDiscardEnable is enabled, the clipping input and output primitives counters may: not be incremented. When a pipeline statistics query finishes, the result for that query is marked as available. The application can: copy the result to a buffer (via fname:vkCmdCopyQueryPoolResults), or request it be put into host memory (via fname:vkGetQueryPoolResults). // refEnd VkQueryPipelineStatisticFlagBits [[queries-timestamps]] == Timestamp Queries _Timestamps_ provide applications with a mechanism for timing the execution of commands. A timestamp is an integer value generated by the sname:VkPhysicalDevice. Unlike other queries, timestamps do not operate over a range, and so do not use flink:vkCmdBeginQuery or flink:vkCmdEndQuery. The mechanism is built around a set of commands that allow the application to tell the sname:VkPhysicalDevice to write timestamp values to a <> and then either read timestamp values on the host (using flink:vkGetQueryPoolResults) or copy timestamp values to a sname:VkBuffer (using flink:vkCmdCopyQueryPoolResults). The application can: then compute differences between timestamps to determine execution time. The number of valid bits in a timestamp value is determined by the sname:VkQueueFamilyProperties::pname:timestampValidBits property of the queue on which the timestamp is written. Timestamps are supported on any queue which reports a non-zero value for pname:timestampValidBits via flink:vkGetPhysicalDeviceQueueFamilyProperties. If the <> limit is ename:VK_TRUE, timestamps are supported by every queue family that supports either graphics or compute operations (see slink:VkQueueFamilyProperties). The number of nanoseconds it takes for a timestamp value to be incremented by 1 can: be obtained from sname:VkPhysicalDeviceLimits::pname:timestampPeriod after a call to fname:vkGetPhysicalDeviceProperties. // refBegin vkCmdWriteTimestamp Write a device timestamp into a query object To request a timestamp, call: include::../api/protos/vkCmdWriteTimestamp.txt[] * pname:commandBuffer is the command buffer into which the command will be recorded. * pname:pipelineStage is one of the elink:VkPipelineStageFlagBits, specifying a stage of the pipeline. * pname:queryPool is the query pool that will manage the timestamp. * pname:query is the query within the query pool that will contain the timestamp. fname:vkCmdWriteTimestamp latches the value of the timer when all previous commands have completed executing as far as the specified pipeline stage, and writes the timestamp value to memory. When the timestamp value is written, the availability status of the query is set to available. [NOTE] .Note ==== If an implementation is unable to detect completion and latch the timer at any specific stage of the pipeline, it may: instead do so at any logically later stage. ==== flink:vkCmdCopyQueryPoolResults can: then be called to copy the timestamp value from the query pool into buffer memory, with ordering and synchronization behavior equivalent to how other queries operate. Timestamp values can: also be retrieved from the query pool using flink:vkGetQueryPoolResults. As with other queries, the query must: be reset using flink:vkCmdResetQueryPool before requesting the timestamp value be written to it. While fname:vkCmdWriteTimestamp can: be called inside or outside of a render pass instance, flink:vkCmdCopyQueryPoolResults must: only be called outside of a render pass instance. ifdef::VK_KHX_multiview[] If fname:vkCmdWriteTimestamp is called while executing a render pass instance that has multiview enabled, the timestamp uses [eq]#N# consecutive query indices in the query pool (starting at pname:query) where [eq]#N# is the number of bits set in the view mask of the subpass the command is executed in. The resulting query values are determined by an implementation-dependent choice of one of the following behaviors: * The first query is a timestamp value and (if more than one bit is set in the view mask) zero is written to the remaining queries. If two timestamps are written in the same subpass, the sum of the execution time of all views between those commands is the difference between the first query written by each command. * All [eq]#N# queries are timestamp values. If two timestamps are written in the same subpass, the sum of the execution time of all views between those commands is the sum of the difference between corresponding queries written by each command. The difference between corresponding queries may: be the execution time of a single view. In either case, the application can: sum the differences between all [eq]#N# queries to determine the total execution time. endif::VK_KHX_multiview[] .Valid Usage **** * [[VUID-vkCmdWriteTimestamp-queryPool-00828]] The query identified by pname:queryPool and pname:query must: be _unavailable_ * [[VUID-vkCmdWriteTimestamp-timestampValidBits-00829]] The command pool's queue family must: support a non-zero pname:timestampValidBits ifdef::VK_KHX_multiview[] * [[VUID-vkCmdWriteTimestamp-None-00830]] All queries used by the command must: be unavailable * [[VUID-vkCmdWriteTimestamp-query-00831]] If fname:vkCmdWriteTimestamp is called within a render pass instance, the sum of pname:query and the number of bits set in the current subpass's view mask must: be less than or equal to the number of queries in pname:queryPool endif::VK_KHX_multiview[] **** include::../validity/protos/vkCmdWriteTimestamp.txt[]