Vulkan-Docs/doc/specs/vulkan/chapters/cmdbuffers.txt

// Copyright (c) 2015-2016 The Khronos Group Inc.
// Copyright notice at https://www.khronos.org/registry/speccopyright.html

[[commandbuffers]]
= Command Buffers

// refBegin VkCommandBuffer Opaque handle to a command buffer object

Command buffers are objects used to record commands which can: be
subsequently submitted to a device queue for execution.
There are two levels of command buffers - _primary command buffers_, which
can: execute secondary command buffers, and which are submitted to queues,
and _secondary command buffers_, which can: be executed by primary command
buffers, and which are not directly submitted to queues.

Command buffers are represented by sname:VkCommandBuffer handles:

include::../api/handles/VkCommandBuffer.txt[]

// refEnd VkCommandBuffer

Recorded commands include commands to bind pipelines and descriptor sets to
the command buffer, commands to modify dynamic state, commands to draw (for
graphics rendering), commands to dispatch (for compute), commands to execute
secondary command buffers (for primary command buffers only), commands to
copy buffers and images, and other commands.

[[commandbuffers-statereset]]
Each command buffer manages state independently of other command buffers.
There is no inheritance of state across primary and secondary command
buffers, or between secondary command buffers.
When a command buffer begins recording, all state in that command buffer is
undefined.
When secondary command buffer(s) are recorded to execute on a primary
command buffer, the secondary command buffer inherits no state from the
primary command buffer, and all state of the primary command buffer is
undefined after an execute secondary command buffer command is recorded.
There is one exception to this rule - if the primary command buffer is
inside a render pass instance, then the render pass and subpass state is not
disturbed by executing secondary command buffers.
Whenever the state of a command buffer is undefined, the application must:
set all relevant state on the command buffer before any state dependent
commands such as draws and dispatches are recorded, otherwise the behavior
of executing that command buffer is undefined.

Unless otherwise specified, and without explicit synchronization, the
various commands submitted to a queue via command buffers may: execute in
arbitrary order relative to each other, and/or concurrently.
Also, the memory side-effects of those commands may: not be directly visible
to other commands without memory barriers.
This is true within a command buffer, and across command buffers submitted
to a given queue.
See <<synchronization-events>>, <<synchronization-pipeline-barriers>> and
<<synchronization-memory-barriers>> about synchronization primitives
suitable to guarantee execution order and side-effect visibility between
commands on a given queue.

Each command buffer is always in one of three states:

  * _Initial state_: Before flink:vkBeginCommandBuffer.
    Either flink:vkBeginCommandBuffer has never been called, or the command
    buffer has been reset since it last recorded commands.
  * _Recording state_: Between flink:vkBeginCommandBuffer and
    flink:vkEndCommandBuffer.
    The command buffer is in a state where it can: record commands.
  * _Executable state_: After flink:vkEndCommandBuffer.
    The command buffer is in a state where it has finished recording
    commands and can: be executed.

_Resetting_ a command buffer is an operation that discards any previously
recorded commands and puts a command buffer in the initial state.
Resetting occurs as a result of flink:vkResetCommandBuffer or
flink:vkResetCommandPool, or as part of flink:vkBeginCommandBuffer (which
additionally puts the command buffer in the recording state).


[[commandbuffers-pools]]
== Command Pools

// refBegin VkCommandPool Opaque handle to a command pool object

Command pools are opaque objects that command buffer memory is allocated
from, and which allow the implementation to amortize the cost of resource
creation across multiple command buffers.
Command pools are application-synchronized, meaning that a command pool
must: not be used concurrently in multiple threads.
That includes use via recording commands on any command buffers allocated
from the pool, as well as operations that allocate, free, and reset command
buffers or the pool itself.

Command pools are represented by sname:VkCommandPool handles:

include::../api/handles/VkCommandPool.txt[]

// refEnd VkCommandPool

// refBegin vkCreateCommandPool Create a new command pool object

To create a command pool, call:

include::../api/protos/vkCreateCommandPool.txt[]

  * pname:device is the logical device that creates the command pool.
  * pname:pCreateInfo contains information used to create the command pool.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.
  * pname:pCommandPool points to a sname:VkCommandPool handle in which the
    created pool is returned.

include::../validity/protos/vkCreateCommandPool.txt[]

// refBegin VkCommandPoolCreateInfo Structure specifying parameters of a newly created command pool

The sname:VkCommandPoolCreateInfo structure is defined as:

include::../api/structs/VkCommandPoolCreateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:flags is a bitmask indicating usage behavior for the pool and
    command buffers allocated from it.
    Bits which can: be set include:
+
--
// refBegin VkCommandPoolCreateFlagBits Bitmask specifying usage behavior for a command pool
include::../api/enums/VkCommandPoolCreateFlagBits.txt[]
--
+
  ** ename:VK_COMMAND_POOL_CREATE_TRANSIENT_BIT indicates that command
     buffers allocated from the pool will be short-lived, meaning that they
     will be reset or freed in a relatively short timeframe.
     This flag may: be used by the implementation to control memory
     allocation behavior within the pool.
  ** ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT controls whether
     command buffers allocated from the pool can: be individually reset.
     If this flag is set, individual command buffers allocated from the pool
     can: be reset either explicitly, by calling fname:vkResetCommandBuffer,
     or implicitly, by calling fname:vkBeginCommandBuffer on an executable
     command buffer.
     If this flag is not set, then fname:vkResetCommandBuffer and
     fname:vkBeginCommandBuffer (on an executable command buffer) must: not
     be called on the command buffers allocated from the pool, and they can:
     only be reset in bulk by calling fname:vkResetCommandPool.
  * pname:queueFamilyIndex designates a queue family as described in section
    <<devsandqueues-queueprops,Queue Family Properties>>.
    All command buffers allocated from this command pool must: be submitted
    on queues from the same queue family.

.Valid Usage
****
  * pname:queueFamilyIndex must: be the index of a queue family available in
    the calling command's pname:device parameter
****

include::../validity/structs/VkCommandPoolCreateInfo.txt[]

// refBegin vkResetCommandPool Reset a command pool

To reset a command pool, call:

include::../api/protos/vkResetCommandPool.txt[]

  * pname:device is the logical device that owns the command pool.
  * pname:commandPool is the command pool to reset.
  * pname:flags contains additional flags controlling the behavior of the
    reset.
    Bits which can: be set include:
+
--
// refBegin VkCommandPoolResetFlagBits Bitmask controlling behavior of a command pool reset
include::../api/enums/VkCommandPoolResetFlagBits.txt[]
--
+
If pname:flags includes ename:VK_COMMAND_POOL_RESET_RELEASE_RESOURCES_BIT,
resetting a command pool recycles all of the resources from the command pool
back to the system.

Resetting a command pool recycles all of the resources from all of the
command buffers allocated from the command pool back to the command pool.
All command buffers that have been allocated from the command pool are put
in the initial state.

.Valid Usage
****
  * All sname:VkCommandBuffer objects allocated from pname:commandPool must:
    not currently be pending execution
****

include::../validity/protos/vkResetCommandPool.txt[]

// refBegin vkDestroyCommandPool Destroy a command pool object

To destroy a command pool, call:

include::../api/protos/vkDestroyCommandPool.txt[]

  * pname:device is the logical device that destroys the command pool.
  * pname:commandPool is the handle of the command pool to destroy.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.

When a pool is destroyed, all command buffers allocated from the pool are
implicitly freed and become invalid.
Command buffers allocated from a given pool do not need to be freed before
destroying that command pool.

.Valid Usage
****
  * All sname:VkCommandBuffer objects allocated from pname:commandPool must:
    not be pending execution
  * If sname:VkAllocationCallbacks were provided when pname:commandPool was
    created, a compatible set of callbacks must: be provided here
  * If no sname:VkAllocationCallbacks were provided when pname:commandPool
    was created, pname:pAllocator must: be `NULL`
****

include::../validity/protos/vkDestroyCommandPool.txt[]


[[commandbuffer-allocation]]
== Command Buffer Allocation and Management

// refBegin vkAllocateCommandBuffers Allocate command buffers from an existing command pool

To allocate command buffers, call:

include::../api/protos/vkAllocateCommandBuffers.txt[]

  * pname:device is the logical device that owns the command pool.
  * pname:pAllocateInfo is a pointer to an instance of the
    sname:VkCommandBufferAllocateInfo structure describing parameters of the
    allocation.
  * pname:pCommandBuffers is a pointer to an array of sname:VkCommandBuffer
    handles in which the resulting command buffer objects are returned.
    The array must: be at least the length specified by the
    pname:commandBufferCount member of pname:pAllocateInfo.
    Each allocated command buffer begins in the initial state.

include::../validity/protos/vkAllocateCommandBuffers.txt[]

// refBegin VkCommandBufferAllocateInfo Structure specifying the allocation parameters for command buffer object

The sname:VkCommandBufferAllocateInfo structure is defined as:

include::../api/structs/VkCommandBufferAllocateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:commandPool is the name of the command pool that the command
    buffers allocate their memory from.
  * pname:level determines whether the command buffers are primary or
    secondary command buffers.
    Possible values include:
+
--
// refBegin VkCommandBufferLevel Structure specifying a command buffer level
include::../api/enums/VkCommandBufferLevel.txt[]
--
+
  * pname:commandBufferCount is the number of command buffers to allocate
    from the pool.

.Valid Usage
****
  * pname:commandBufferCount must: be greater than `0`
****

include::../validity/structs/VkCommandBufferAllocateInfo.txt[]

// refBegin vkResetCommandBuffer Reset a command buffer

To reset command buffers, call:

include::../api/protos/vkResetCommandBuffer.txt[]

  * pname:commandBuffer is the command buffer to reset.
    The command buffer can: be in any state, and is put in the initial
    state.
  * pname:flags is a bitmask controlling the reset operation.
    Bits which can: be set include:
+
--
// refBegin VkCommandBufferResetFlagBits Bitmask controlling behavior of a command buffer reset
include::../api/enums/VkCommandBufferResetFlagBits.txt[]
--
+
If pname:flags includes ename:VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT,
then most or all memory resources currently owned by the command buffer
should: be returned to the parent command pool.
If this flag is not set, then the command buffer may: hold onto memory
resources and reuse them when recording commands.

.Valid Usage
****
  * pname:commandBuffer must: not currently be pending execution
  * pname:commandBuffer must: have been allocated from a pool that was
    created with the ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT
****

include::../validity/protos/vkResetCommandBuffer.txt[]

// refBegin vkFreeCommandBuffers Free command buffers

To free command buffers, call:

include::../api/protos/vkFreeCommandBuffers.txt[]

  * pname:device is the logical device that owns the command pool.
  * pname:commandPool is the handle of the command pool that the command
    buffers were allocated from.
  * pname:commandBufferCount is the length of the pname:pCommandBuffers
    array.
  * pname:pCommandBuffers is an array of handles of command buffers to free.

.Valid Usage
****
  * All elements of pname:pCommandBuffers must: not be pending execution
  * pname:pCommandBuffers must: be a pointer to an array of
    pname:commandBufferCount sname:VkCommandBuffer handles, each element of
    which must: either be a valid handle or code:NULL
****

include::../validity/protos/vkFreeCommandBuffers.txt[]


[[commandbuffers-recording]]
== Command Buffer Recording

// refBegin vkBeginCommandBuffer Start recording a command buffer

To begin recording a command buffer, call:

include::../api/protos/vkBeginCommandBuffer.txt[]

  * pname:commandBuffer is the handle of the command buffer which is to be
    put in the recording state.
  * pname:pBeginInfo is an instance of the sname:VkCommandBufferBeginInfo
    structure, which defines additional information about how the command
    buffer begins recording.

.Valid Usage
****
  * pname:commandBuffer must: not be in the recording state
  * pname:commandBuffer must: not currently be pending execution
  * If pname:commandBuffer was allocated from a sname:VkCommandPool which
    did not have the ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT
    flag set, pname:commandBuffer must: be in the initial state
  * If pname:commandBuffer is a secondary command buffer, the
    pname:pInheritanceInfo member of pname:pBeginInfo must: be a valid
    sname:VkCommandBufferInheritanceInfo structure
  * If pname:commandBuffer is a secondary command buffer and either the
    pname:occlusionQueryEnable member of the pname:pInheritanceInfo member
    of pname:pBeginInfo is ename:VK_FALSE, or the precise occlusion queries
    feature is not enabled, the pname:queryFlags member of the
    pname:pInheritanceInfo member pname:pBeginInfo must: not contain
    ename:VK_QUERY_CONTROL_PRECISE_BIT
****

include::../validity/protos/vkBeginCommandBuffer.txt[]

// refBegin VkCommandBufferBeginInfo Structure specifying a command buffer begin operation

The sname:VkCommandBufferBeginInfo structure is defined as:

include::../api/structs/VkCommandBufferBeginInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:flags is a bitmask indicating usage behavior for the command
    buffer.
    Bits which can: be set include:
+
--
// refBegin VkCommandBufferUsageFlagBits Bitmask specifying usage behavior for command buffer
include::../api/enums/VkCommandBufferUsageFlagBits.txt[]
--
+
  ** ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT indicates that each
     recording of the command buffer will only be submitted once, and the
     command buffer will be reset and recorded again between each
     submission.
  ** ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT indicates that a
     secondary command buffer is considered to be entirely inside a render
     pass.
     If this is a primary command buffer, then this bit is ignored.
  ** Setting ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT allows the
     command buffer to be resubmitted to a queue or recorded into a primary
     command buffer while it is pending execution.
  * pname:pInheritanceInfo is a pointer to a
    sname:VkCommandBufferInheritanceInfo structure, which is used if
    pname:commandBuffer is a secondary command buffer.
    If this is a primary command buffer, then this value is ignored.

.Valid Usage
****
  * If pname:flags contains
    ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT, the
    pname:renderPass member of pname:pInheritanceInfo must: be a valid
    sname:VkRenderPass
  * If pname:flags contains
    ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT, the
    pname:subpass member of pname:pInheritanceInfo must: be a valid subpass
    index within the pname:renderPass member of pname:pInheritanceInfo
  * If pname:flags contains
    ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT, the
    pname:framebuffer member of pname:pInheritanceInfo must: be either
    dlink:VK_NULL_HANDLE, or a valid sname:VkFramebuffer that is compatible
    with the pname:renderPass member of pname:pInheritanceInfo
****

include::../validity/structs/VkCommandBufferBeginInfo.txt[]

// refBegin VkCommandBufferInheritanceInfo Structure specifying command buffer inheritance info

If the command buffer is a secondary command buffer, then the
sname:VkCommandBufferInheritanceInfo structure defines any state that will
be inherited from the primary command buffer:

include::../api/structs/VkCommandBufferInheritanceInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:renderPass is a sname:VkRenderPass object defining which render
    passes the sname:VkCommandBuffer will be <<renderpass-compatibility,
    compatible>> with and can: be executed within.
    If the sname:VkCommandBuffer will not be executed within a render pass
    instance, pname:renderPass is ignored.
  * pname:subpass is the index of the subpass within the render pass
    instance that the sname:VkCommandBuffer will be executed within.
    If the sname:VkCommandBuffer will not be executed within a render pass
    instance, pname:subpass is ignored.
  * pname:framebuffer optionally refers to the sname:VkFramebuffer object
    that the sname:VkCommandBuffer will be rendering to if it is executed
    within a render pass instance.
    It can: be dlink:VK_NULL_HANDLE if the framebuffer is not known, or if
    the sname:VkCommandBuffer will not be executed within a render pass
    instance.
+
[NOTE]
.Note
====
Specifying the exact framebuffer that the secondary command buffer will be
executed with may: result in better performance at command buffer execution
time.
====
  * pname:occlusionQueryEnable indicates whether the command buffer can: be
    executed while an occlusion query is active in the primary command
    buffer.
    If this is ename:VK_TRUE, then this command buffer can: be executed
    whether the primary command buffer has an occlusion query active or not.
    If this is ename:VK_FALSE, then the primary command buffer must: not
    have an occlusion query active.
  * pname:queryFlags indicates the query flags that can: be used by an
    active occlusion query in the primary command buffer when this secondary
    command buffer is executed.
    If this value includes the ename:VK_QUERY_CONTROL_PRECISE_BIT bit, then
    the active query can: return boolean results or actual sample counts.
    If this bit is not set, then the active query must: not use the
    ename:VK_QUERY_CONTROL_PRECISE_BIT bit.
  * pname:pipelineStatistics indicates the set of pipeline statistics that
    can: be counted by an active query in the primary command buffer when
    this secondary command buffer is executed.
    If this value includes a given bit, then this command buffer can: be
    executed whether the primary command buffer has a pipeline statistics
    query active that includes this bit or not.
    If this value excludes a given bit, then the active pipeline statistics
    query must: not be from a query pool that counts that statistic.

.Valid Usage
****
  * If the <<features-features-inheritedQueries,inherited queries>> feature
    is not enabled, pname:occlusionQueryEnable must: be ename:VK_FALSE
  * If the <<features-features-inheritedQueries,inherited queries>> feature
    is enabled, pname:queryFlags must: be a valid combination of
    elink:VkQueryControlFlagBits values
  * If the <<features-features-pipelineStatisticsQuery,pipeline statistics
    queries>> feature is not enabled, pname:pipelineStatistics must: be
    code:0
****

include::../validity/structs/VkCommandBufferInheritanceInfo.txt[]

A primary command buffer is considered to be pending execution from the time
it is submitted via fname:vkQueueSubmit until that submission completes.

A secondary command buffer is considered to be pending execution from the
time its execution is recorded into a primary buffer (via
fname:vkCmdExecuteCommands) until the final time that primary buffer's
submission to a queue completes.
If, after the primary buffer completes, the secondary command buffer is
recorded to execute on a different primary buffer, the first primary buffer
must: not be resubmitted until after it is reset with
flink:vkResetCommandBuffer unless the secondary command buffer was recorded
with ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT.

If ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT is not set on a
secondary command buffer, that command buffer must: not be used more than
once in a given primary command buffer.
Furthermore, if a secondary command buffer without
ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT set is recorded to
execute in a primary command buffer with
ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT set, the primary command
buffer must: not be pending execution more than once at a time.

[NOTE]
.Note
====
On some implementations, not using the
ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT bit enables command
buffers to be patched in-place if needed, rather than creating a copy of the
command buffer.
====

If a command buffer is in the executable state and the command buffer was
allocated from a command pool with the
ename:VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT flag set, then
fname:vkBeginCommandBuffer implicitly resets the command buffer, behaving as
if fname:vkResetCommandBuffer had been called with
ename:VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT not set.
It then puts the command buffer in the recording state.

Once recording starts, an application records a sequence of commands
(ftext:vkCmd*) to set state in the command buffer, draw, dispatch, and other
commands.

// refBegin vkEndCommandBuffer Finish recording a command buffer

To complete recording of a command buffer, call:

include::../api/protos/vkEndCommandBuffer.txt[]

  * pname:commandBuffer is the command buffer to complete recording.
    The command buffer must: have been in the recording state, and is moved
    to the executable state.

If there was an error during recording, the application will be notified by
an unsuccessful return code returned by fname:vkEndCommandBuffer.
If the application wishes to further use the command buffer, the command
buffer must: be reset.

.Valid Usage
****
  * pname:commandBuffer must: be in the recording state
  * If pname:commandBuffer is a primary command buffer, there must: not be
    an active render pass instance
  * All queries made <<queries-operation-active,active>> during the
    recording of pname:commandBuffer must: have been made inactive
****

include::../validity/protos/vkEndCommandBuffer.txt[]

When a command buffer is in the executable state, it can: be submitted to a
queue for execution.


[[commandbuffers-submission]]
== Command Buffer Submission

// refBegin vkQueueSubmit Submits a sequence of semaphores or command buffers to a queue

To submit command buffers to a queue, call:

include::../api/protos/vkQueueSubmit.txt[]

  * pname:queue is the queue that the command buffers will be submitted to.
  * pname:submitCount is the number of elements in the pname:pSubmits array.
  * pname:pSubmits is a pointer to an array of slink:VkSubmitInfo
    structures, each specifying a command buffer submission batch.
  * pname:fence is an optional handle to a fence to be signaled.
    If pname:fence is not dlink:VK_NULL_HANDLE, it defines a
    <<synchronization-fences-signaling, fence signal operation>>.

[NOTE]
.Note
====
Submission can be a high overhead operation, and applications should:
attempt to batch work together into as few calls to fname:vkQueueSubmit as
possible.
====

fname:vkQueueSubmit is a <<devsandqueues-submission,queue submission
command>>, with each batch defined by an element of pname:pSubmits as an
instance of the slink:VkSubmitInfo structure.

Fence and semaphore operations submitted with flink:vkQueueSubmit have
additional ordering constraints compared to other submission commands, with
dependencies involving previous and subsequent queue operations.
Information about these additional constraints can be found in the
<<synchronization-semaphores, semaphore>> and <<synchronization-fences,
fence>> sections of <<synchronization, the synchronization chapter>>.

Details on the interaction of pname:pWaitDstStageMask with synchronization
are described in the <<synchronization-semaphores-waiting, semaphore wait
operation>> section of <<synchronization, the synchronization chapter>>.

.Valid Usage
****
  * If pname:fence is not dlink:VK_NULL_HANDLE, pname:fence must: be
    unsignaled
  * If pname:fence is not dlink:VK_NULL_HANDLE, pname:fence must: not be
    associated with any other queue command that has not yet completed
    execution on that queue
****

include::../validity/protos/vkQueueSubmit.txt[]

// refBegin VkSubmitInfo Structure specifying a queue submit operation

The sname:VkSubmitInfo structure is defined as:

include::../api/structs/VkSubmitInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:waitSemaphoreCount is the number of semaphores upon which to wait
    before executing the command buffers for the batch.
  * pname:pWaitSemaphores is a pointer to an array of semaphores upon which
    to wait before the command buffers for this batch begin execution.
    If semaphores to wait on are provided, they define a
    <<synchronization-semaphores-waiting, semaphore wait operation>>.
  * pname:pWaitDstStageMask is a pointer to an array of pipeline stages at
    which each corresponding semaphore wait will occur.
  * pname:commandBufferCount is the number of command buffers to execute in
    the batch.
  * pname:pCommandBuffers is a pointer to an array of command buffers to
    execute in the batch.
    The command buffers submitted in a batch begin execution in the order
    they appear in pname:pCommandBuffers, but may: complete out of order.
  * pname:signalSemaphoreCount is the number of semaphores to be signaled
    once the commands specified in pname:pCommandBuffers have completed
    execution.
  * pname:pSignalSemaphores is a pointer to an array of semaphores which
    will be signaled when the command buffers for this batch have completed
    execution.
    If semaphores to be signaled are provided, they define a
    <<synchronization-semaphores-signaling, semaphore signal operation>>.

.Valid Usage
****
  * Any given element of pname:pSignalSemaphores must: currently be
    unsignaled
  * Any given element of pname:pCommandBuffers must: either have been
    recorded with the ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT, or
    not currently be executing on the device
  * Any given element of pname:pCommandBuffers must: be in the executable
    state
  * If any given element of pname:pCommandBuffers contains commands that
    execute secondary command buffers, those secondary command buffers must:
    have been recorded with the
    ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT, or not currently be
    executing on the device
  * If any given element of pname:pCommandBuffers was recorded with
    ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT, it must: not have
    been previously submitted without re-recording that command buffer
  * If any given element of pname:pCommandBuffers contains commands that
    execute secondary command buffers recorded with
    ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT, each such secondary
    command buffer must: not have been previously submitted without
    re-recording that command buffer
  * Any given element of pname:pCommandBuffers must: not contain commands
    that execute a secondary command buffer, if that secondary command
    buffer has been recorded in another primary command buffer after it was
    recorded into this sname:VkCommandBuffer
  * Any given element of pname:pCommandBuffers must: have been allocated
    from a sname:VkCommandPool that was created for the same queue family
    that the calling command's pname:queue belongs to
  * Any given element of pname:pCommandBuffers must: not have been allocated
    with ename:VK_COMMAND_BUFFER_LEVEL_SECONDARY
  * Any given element of sname:VkSemaphore in pname:pWaitSemaphores must:
    refer to a prior signal of that sname:VkSemaphore that will not be
    consumed by any other wait on that semaphore
  * If the <<features-features-geometryShader,geometry shaders>> feature is
    not enabled, any given element of pname:pWaitDstStageMask must: not
    contain ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
  * If the <<features-features-tessellationShader,tessellation shaders>>
    feature is not enabled, any given element of pname:pWaitDstStageMask
    must: not contain
    ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
    ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
****

include::../validity/structs/VkSubmitInfo.txt[]

ifdef::VK_NV_win32_keyed_mutex[]
include::VK_NV_win32_keyed_mutex/keyed_mutex_submit.txt[]
endif::VK_NV_win32_keyed_mutex[]


[[commandbuffers-submission-progress]]
== Queue Forward Progress

The application must: ensure that command buffer submissions will be able to
complete without any subsequent operations by the application on any queue.
After any call to fname:vkQueueSubmit, for every queued wait on a semaphore
there must: be a prior signal of that semaphore that will not be consumed by
a different wait on the semaphore.

Command buffers in the submission can: include flink:vkCmdWaitEvents
commands that wait on events that will not be signaled by earlier commands
in the queue.
Such events must: be signaled by the application using flink:vkSetEvent, and
the fname:vkCmdWaitEvents commands that wait upon them must: not be inside a
render pass instance.
Implementations may: have limits on how long the command buffer will wait,
in order to avoid interfering with progress of other clients of the device.
If the event is not signaled within these limits, results are undefined and
may: include device loss.


[[commandbuffers-secondary]]
== Secondary Command Buffer Execution

// refBegin vkCmdExecuteCommands Execute a secondary command buffer from a primary command buffer

A secondary command buffer must: not be directly submitted to a queue.
Instead, secondary command buffers are recorded to execute as part of a
primary command buffer with the command:

include::../api/protos/vkCmdExecuteCommands.txt[]

  * pname:commandBuffer is a handle to a primary command buffer that the
    secondary command buffers are executed in.
  * pname:commandBufferCount is the length of the pname:pCommandBuffers
    array.
  * pname:pCommandBuffers is an array of secondary command buffer handles,
    which are recorded to execute in the primary command buffer in the order
    they are listed in the array.

Once fname:vkCmdExecuteCommands has been called, any prior executions of the
secondary command buffers specified by pname:pCommandBuffers in any other
primary command buffer become invalidated, unless those secondary command
buffers were recorded with
ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT.

.Valid Usage
****
  * pname:commandBuffer must: have been allocated with a pname:level of
    ename:VK_COMMAND_BUFFER_LEVEL_PRIMARY
  * Any given element of pname:pCommandBuffers must: have been allocated
    with a pname:level of ename:VK_COMMAND_BUFFER_LEVEL_SECONDARY
  * Any given element of pname:pCommandBuffers must: not be already pending
    execution in pname:commandBuffer, or appear twice in
    pname:pCommandBuffers, unless it was recorded with the
    ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT flag
  * Any given element of pname:pCommandBuffers must: not be already pending
    execution in any other sname:VkCommandBuffer, unless it was recorded
    with the ename:VK_COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT flag
  * Any given element of pname:pCommandBuffers must: be in the executable
    state
  * Any given element of pname:pCommandBuffers must: have been allocated
    from a sname:VkCommandPool that was created for the same queue family as
    the sname:VkCommandPool from which pname:commandBuffer was allocated
  * If fname:vkCmdExecuteCommands is being called within a render pass
    instance, that render pass instance must: have been begun with the
    pname:contents parameter of fname:vkCmdBeginRenderPass set to
    ename:VK_SUBPASS_CONTENTS_SECONDARY_COMMAND_BUFFERS
  * If fname:vkCmdExecuteCommands is being called within a render pass
    instance, any given element of pname:pCommandBuffers must: have been
    recorded with the ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT
  * If fname:vkCmdExecuteCommands is being called within a render pass
    instance, any given element of pname:pCommandBuffers must: have been
    recorded with sname:VkCommandBufferInheritanceInfo::pname:subpass set to
    the index of the subpass which the given command buffer will be executed
    in
  * If fname:vkCmdExecuteCommands is being called within a render pass
    instance, any given element of pname:pCommandBuffers must: have been
    recorded with a render pass that is compatible with the current render
    pass - see <<renderpass-compatibility>>
  * If fname:vkCmdExecuteCommands is being called within a render pass
    instance, and any given element of pname:pCommandBuffers was recorded
    with sname:VkCommandBufferInheritanceInfo::pname:framebuffer not equal
    to dlink:VK_NULL_HANDLE, that sname:VkFramebuffer must: match the
    sname:VkFramebuffer used in the current render pass instance
  * If fname:vkCmdExecuteCommands is not being called within a render pass
    instance, any given element of pname:pCommandBuffers must: not have been
    recorded with the ename:VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT
  * If the <<features-features-inheritedQueries,inherited queries>> feature
    is not enabled, pname:commandBuffer must: not have any queries
    <<queries-operation-active,active>>
  * If pname:commandBuffer has a ename:VK_QUERY_TYPE_OCCLUSION query
    <<queries-operation-active,active>>, then each element of
    pname:pCommandBuffers must: have been recorded with
    sname:VkCommandBufferInheritanceInfo::pname:occlusionQueryEnable set to
    ename:VK_TRUE
  * If pname:commandBuffer has a ename:VK_QUERY_TYPE_OCCLUSION query
    <<queries-operation-active,active>>, then each element of
    pname:pCommandBuffers must: have been recorded with
    sname:VkCommandBufferInheritanceInfo::pname:queryFlags having all bits
    set that are set for the query
  * If pname:commandBuffer has a ename:VK_QUERY_TYPE_PIPELINE_STATISTICS
    query <<queries-operation-active,active>>, then each element of
    pname:pCommandBuffers must: have been recorded with
    sname:VkCommandBufferInheritanceInfo::pname:pipelineStatistics having
    all bits set that are set in the sname:VkQueryPool the query uses
  * Any given element of pname:pCommandBuffers must: not begin any query
    types that are <<queries-operation-active,active>> in
    pname:commandBuffer
****

include::../validity/protos/vkCmdExecuteCommands.txt[]