EIPs/EIPS/eip-2315.md

eip	title	status	type	category	author	discussions-to	created
2315	Simple Subroutines for the EVM	Review	Standards Track	Core	Greg Colvin <greg@colvin.org>, Martin Holst Swende (@holiman)	https://ethereum-magicians.org/t/eip-2315-simple-subroutines-for-the-evm/3941	2019-10-17

Abstract

This proposal introduces three opcodes to support subroutines: BEGINSUB, JUMPSUB and RETURNSUB.

Safety and amenability to static analysis equivalent to EIP-615 can be ensured by enforcing a few simple rules, and validated with the provided algorithm.

Motivation

The EVM does not provide subroutines as a primitive. Instead, calls can be synthesized by fetching and pushing the current program counter on the data stack and jumping to the subroutine address; returns can be synthesized by getting the return address to the top of the stack and jumping back to it. Over the course of 30 years the computer industry struggled with this complexity and cost and settled in on providing primitive operations to directly support subroutines. These are provided in some form by most all physical and virtual machines going back at least 50 years.

In whatever form, these operations provide for capturing the current context of execution, transferring control to a new context, and returning to original context.

We propose a safe, simple return-stack mechanism, proven to work well for stack machines, which we specify here. Note that this specification is entirely semantic. It constrains only stack usage and control flow and imposes no syntax on code beyond being a sequence of bytes to be executed.

Specification

We introduce one more stack into the EVM in addition to the existing data stack which we call the return stack. The return stack is limited to 1024 items.

BEGINSUB

Marks the entry point to a subroutine. Execution of a BEGINSUB is a no-op.

JUMPSUB

Transfers control to a subroutine.

1. Pop the location off the data stack.
2. If the opcode at location is not a BEGINSUB abort.
3. If the return stack already has 1024 items abort.
4. Push the current pc + 1 to the return stack.
5. Set pc to location + 1.

• pops one item off the data stack
• pushes one item on the return stack

RETURNSUB

Returns control to the caller of a subroutine.

1. If the return stack is empty abort.
2. Pop pc off the return stack.

• pops one item off the return stack

Note 1: If a resulting pc to be executed is beyond the last instruction then the opcode is implicitly a STOP, which is not an error.

Note 2: Values popped off the return stack do not need to be validated, since they are alterable only by JUMPSUB and RETURNSUB.

Note 3: The description above lays out the semantics of this feature in terms of a return stack. But the actual state of the return stack is not observable by EVM code or consensus-critical to the protocol. (For example, a node implementor may code JUMPSUB to unobservably push pc on the return stack rather than pc + 1, which is allowed so long as RETURNSUB observably returns control to the pc + 1 location.)

Indirect Jumps

If EIP-3337 BEGINDATA is implemented then the indirect jumps from EIP-615 -- JUMPV and JUMPSUBV -- can be implemented. These would take two arguments on the stack: a constant offset relative to BEGINDATA to a jump table, and a variable index into that table. Detailed specifications can await the acceptance EIP-3337.

Rationale

We modeled this design on the simple, proven, archetypal Forth virtual machine of 1970. It is a two-stack design -- the data stack is supplemented with a return stack to support jumping into and returning from subroutines, as specified above. The separate return stack ensures that the return address cannot be overwritten or mislaid, and obviates any need to swap the return address past the arguments on the stack. Importantly, a dynamic jump is not needed to implement subroutine returns, allowing for deprecation of dynamic uses of JUMP and JUMPI. Deprecating dynamic jumps is key to practical static analysis of code.

(JUMPSUB and RETURNSUB were also defined in terms of a return stack in EIP-615) .

Backwards and Forwards Compatibility

These changes do not affect the semantics of existing EVM code.

These changes are compatible with using EIP-3337 to provide stack frames, by associating a frame with each subroutine.

Implementations

Three clients have implemented this (or an earlier version of) this proposal:

• geth .
• besu, and
• openethereum.

Costs and Codes

We suggest that the cost of

• BEGINSUB be jumpdest (1)
• JUMPSUB be high (10)
  • This is the same as JUMPI, and 2 more than JUMP.
• RETURNSUB be low (5).

Benchmarking might be needed to tell if the costs are well-balanced.

We suggest the following opcodes:

0x5c BEGINSUB
0x5d RETURNSUB
0x5e JUMPSUB

Security Considerations

These changes do introduce new flow control instructions, so any software which does static/dynamic analysis of evm-code needs to be modified accordingly. The JUMPSUB semantics are similar to JUMP (but jumping to a BEGINSUB), whereas the RETURNSUB instruction is different, since it can 'land' on any opcode (but the possible destinations can be statically inferred).

The safety and amenability to static analysis of valid programs is equivalent to EIP-615, but without imposing syntactic constraints, and thus with minimal impact on low-level optimizations. Validity is ensured by the following rules, and programs can be validated with the provided algorithm.

As with EIP-615, contract code must be validated at deploy time for contracts created by external transactions. Internal calls must not be validated, as they may be from older contracts generating older, unsafe code. Unlike EIP-615, backwards compatibility means that no versioning is needed.

However, as soon as these rules are enforced compilers that generate dynamic jumps will be broken. Therefore, in the initial upgrade there should not be any deploy-time validation, though compilers are encouraged to emit only valid code from the start. A future upgrade will start enforcing the rules once compilers and tools are ready.

Validity

We would like to consider EVM code valid iff no execution of the program can lead to an exceptional halting state, but we must validate code in linear time. (More precisely, in time `O(vertices + edges) in the control-flow graph.) So our validation algorithm does not consider the code’s data and computations, only its control flow and stack use. This means we will reject programs with any invalid code paths, even if those paths are not reachable at runtime.

Execution is as defined in the Yellow Paper—a sequence of changes in the EVM state. The conditions on valid code are preserved by state changes. At runtime, if execution of an instruction would violate a condition the execution is in an exceptional halting state. The Yellow Paper defines five such states.

1. Insufficient gas
2. More than 1024 stack items
3. Insufficient stack items
4. Invalid jump destination
5. Invalid instruction

Conditions 1 and 2 -- Insufficient gas and stack overflow, must be checked at runtime. Conditions 3, 4, and 5 cannot occur if the code conforms to the following rules.

• JUMP and JUMPI address only valid JUMPDEST instructions.
• JUMPSUB addresses only valid BEGINSUB instructions.

Valid instructions are not part of PUSH data.

• JUMP, JUMPI and JUMPSUB are always preceded by one of the PUSH instructions.

Requiring a PUSH before each JUMP forbids dynamic jumps. Absent dynamic jumps another mechanism is needed for subroutine returns, as provided here.

The stack pointer or SP points just past the top item on the data stack. We define the stack depth as the number of stack elements between the current SP and the current stack base. The stack base was the SP at the previous JUMPSUB, or 0 on program entry. So we can check for all stack underflows and some stack overflows.

• The stack depth is always positive and at most 1024.

Control flows which return to the same place with a different stack depth are invalid. These can be caused by irreducible paths like jumping into loops and subroutines.

• For each instruction in the code the stack depth is always the same.

If EIP-3337 BEGINDATA is implemented we can add one last rule.

• All statically unreachable instructions must be INVALID.

Validation

The following is a pseudo-go specification of an algorithm for enforcing program validity. It recursively traverses the bytecode, following its control flow and stack use and checking for violations of the rules above. (For simplicity we ignore the issue of JUMPDEST or BEGINSUB bytes in PUSH data.) It runs in time == O(vertices + edges) in the program's control-flow graph.

   bytecode []byte
   stack_depth []int
   SP := 0
   validate(PC :=0)
   {
      // traverse code sequentially, recurse for subroutines and conditional jumps
      while true
      {
         instruction = bytecode[PC]
         if is_invalid(instruction)
            return false;

         // if stack depth set we have been here before 
         // check for constant depth and return to break cycle
         if stack_depth[PC] != 0 {
             if SP != stack_depth[PC]
                 return false
             return true
         }
         stack_depth[PC] = SP

         // effect of instruction on stack
         SP -= removed_items(instruction)
         SP += added_items(instruction)
         if SP < 0 || 1024 < SP 
             return false

         // successful validation of path
         if instruction == STOP, RETURN, or SUICIDE 
             return true

         if instruction == JUMP
         {
             // check for constant and correct destination
             if (bytecode[PC - 33] != PUSH32) 
                 return false
             PC = stack[PC-32]
             if byte_code[PC] != JUMPDEST
                 return false

             // reset PC to destination of jump 
             PC = stack[PC-32]
             continue
         }
         if instruction == JUMPI
         {
             // check for constant and correct destination
             if (bytecode[PC - 33] != PUSH32) 
                 return false
             PC = stack[PC-32]
             if byte_code[PC] != JUMPDEST
                 return false

             // recurse to jump to code to validate 
             if !validate(stack[SP])) 
                 return false
             continue 
         }
         if instruction == JUMPSUB
         {
            // check for constant and correct destination
            if (bytecode[PC - 33] != PUSH32) 
               return false
             prevPC = PC
             PC = stack[PC-32]
             if byte_code[PC] != BEGINSUB
                 return false

             // recurse to jump to code to validate
             prevSP = SP
             depth = SP - prevSP
             SP = depth
             if  !validate(stack[SP]+1))
                 return false
             SP = prevSP - depth + SP
             PC = prevPC
             continue
         }
         if instruction == RETURNSUB
         {
             // successful return from recursion
             PC = prevPC
             return true
         }

         // advance PC according to instruction
         PC = advance_pc(PC, instruction)
      }
      return true       
   }

Test Cases

Simple routine

This should jump into a subroutine, back out and stop.

Bytecode: 0x60045e005c5d (PUSH1 0x04, JUMPSUB, STOP, BEGINSUB, RETURNSUB)

Pc	Op	Cost	Stack	RStack
0	PUSH1	3	[]	[]
2	JUMPSUB	10	[4]	[]
5	RETURNSUB	5	[]	[ 2]
3	STOP	0	[]	[]

Output: 0x Consumed gas: 18

Two levels of subroutines

This should execute fine, going into one two depths of subroutines

Bytecode: 0x6800000000000000000c5e005c60115e5d5c5d (PUSH9 0x00000000000000000c, JUMPSUB, STOP, BEGINSUB, PUSH1 0x11, JUMPSUB, RETURNSUB, BEGINSUB, RETURNSUB)

Pc	Op	Cost	Stack	RStack
0	PUSH9	3	[]	[]
10	JUMPSUB	10	[12]	[]
13	PUSH1	3	[]	[10]
15	JUMPSUB	10	[17]	[10]
18	RETURNSUB	5	[]	[10,15]
16	RETURNSUB	5	[]	[10]
11	STOP	0	[]	[]

Consumed gas: 36

Failure 1: invalid jump

This should fail, since the given location is outside of the code-range. The code is the same as previous example, except that the pushed location is 0x01000000000000000c instead of 0x0c.

Bytecode: 0x6801000000000000000c5e005c60115e5d5c5d (PUSH9 0x01000000000000000c, JUMPSUB, STOP, BEGINSUB, PUSH1 0x11, JUMPSUB, RETURNSUB, BEGINSUB, RETURNSUB)

Pc	Op	Cost	Stack	RStack
0	PUSH9	3	[]	[]
10	JUMPSUB	10	[18446744073709551628]	[]

Error: at pc=10, op=JUMPSUB: invalid jump destination

Failure 2: shallow return stack

This should fail at first opcode, due to shallow return_stack

Bytecode: 0x5d5858 (RETURNSUB, PC, PC)

Pc	Op	Cost	Stack	RStack
0	RETURNSUB	5	[]	[]

Error: at pc=0, op=RETURNSUB: invalid retsub

Subroutine at end of code

In this example. the JUMPSUB is on the last byte of code. When the subroutine returns, it should hit the 'virtual stop' after the bytecode, and not exit with error

Bytecode: 0x6005565c5d5b60035e (PUSH1 0x05, JUMP, BEGINSUB, RETURNSUB, JUMPDEST, PUSH1 0x03, JUMPSUB)

Pc	Op	Cost	Stack	RStack
0	PUSH1	3	[]	[]
2	JUMP	8	[5]	[]
5	JUMPDEST	1	[]	[]
6	PUSH1	3	[]	[]
8	JUMPSUB	10	[3]	[]
4	RETURNSUB	5	[]	[ 8]
9	STOP	0	[]	[]

Consumed gas: 30

References

Gavin Wood, Ethereum: A Secure Decentralized Generalized Transaction Ledger, 2014-2021 Greg Colvin, Brooklyn Zelenka, Paweł Bylica, Christian Reitwiessner, EIP-615: Subroutines and Static Jumps for the EVM, 2016-2019 Martin Lundfall, EIP-2327: BEGINDATA Opcode, 2019 Nick Johnson, EIP-3337: Frame pointer support for memory load and store operations, 2021

Copyright

Copyright and related rights waived via CC0.