specs/standards/application/messaging-api.md

title	name	category	tags	editor	contributors
MESSAGING-API	Messaging API definition	Standards Track	reliability application api protocol composition	Oleksandr Kozlov <oleksandr@status.im>	Oleksandr Kozlov <oleksandr@status.im> Prem Chaitanya Prathi <prem@status.im>

Table of Contents

• Abstract
• Design Requirements
• API design
  • Requirements
  • Initial configuration
  • Send
  • Subscribe
  • Message Storage
  • Health Indicator
  • Event Source

Abstract

This document specifies an Application Programming Interface (API) that is RECOMMENDED for developers of the WAKU2 clients to implement, and for consumers to use as a single entry point to its functionalities.

This API defines the RECOMMENDED interface for leveraging Waku protocols to send and receive messages. Applications SHOULD use it to access capabilities for peer discovery, message routing, and reliability.

This document defines the specifications and guidelines necessary for implementing the API, ensuring interoperability and consistency across the Waku protocol family.

Design Requirements

The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in RFC2119.

Definitions

This section defines key terms and concepts used throughout this document. Each term is detailed in dedicated subsections to ensure clarity and consistency in interpretation.

Multiaddr - a self-describing format for encoding network address of a remote peer as per libp2p addressing specification.

Motivation

Real-world application development has exposed challenges in achieving comprehensive usability guarantees for core Waku protocols. Although P2P-RELIABILITY have been introduced to enhance protocol robustness, the fragmented landscape of guidelines and the requirement to re-implement reliability strategies across diverse use cases remain evident.

A significant challenge has been the lack of a unified abstraction for message exchange. Developers require a straightforward mechanism to send, receive, and track messages—whether originating from a node or propagated throughout its connected network.

API design

Requirements

This API is designed for generic use and ease across all implementations and traditional REST architectures. From this point forward, relevant code blocks will be provided in JSON format, HTTP format or by using TypeScript syntax.

Initial configuration

The Messaging API is an abstraction layer built upon the basic functionality provided by a node.
The configuration definitions that follow omit implementation-specific details, focusing exclusively on settings explicitly required by the Messaging API.

{
  mode: "edge" | "relay";
  clusterId: number;
  shards: number[];
  shardsUnderCluster?: number;
  staticStoreNode?: string[];
  preferredServiceNodes?: string[];
  bootstrapNodes: string[];
  storeConfirmation?: boolean;
  receiveConfirmation?: boolean;
  confirmContentTopics?: string[];
}

Properties

mode

This property defines behavior of the node and MUST be specified.

If the node is operating in edge mode, it MUST:

• Employ LIGHTPUSH for sending messages.
• Utilize FILTER for receiving messages.
• Employ PEER-EXCHANGE to discover peers.
• Utilize STORE to obtain message acknowledgements, as described in the Message Storage API section.

If the node is configured in relay mode, it MUST:

• Deploy the RELAY protocol.
• Host endpoints for LIGHTPUSH and FILTER.
• Serve the PEER-EXCHANGE protocol.

edge mode SHOULD be used if node functions in resource restricted environment, where as relay SHOULD be used if node has no hard restrictions.

clusterId

This property MUST be provided. It signifies which cluster a node MUST be operating at as per RELAY-SHARDING.

shards

This property MUST be provided. An array of shard under a specified cluster that node MUST operate at as per RELAY-SHARDING.

shardsUnderCluster

This is an optional property that MUST be a positive integer. If not provided, it defaults to 8. This property is used to automatically map a provided contentTopic to the appropriate shards under the specified clusterId. For further details, refer to the RELAY-SHARDING specification.

staticStoreNode

A list of Multiaddr addresses to remote peers that MUST be used for retrieving past messages or performing infrequent queries using the STORE protocol. If not provided, the implementation SHOULD utilize either preferredServiceNodes or nodes discovered via the network.

preferredServiceNodes

A list of Multiaddr addresses to remote peers that SHOULD be used for obtaining various network resources.

These resources MAY include:

• infrequent STORE queries;
• a LIGHTPUSH endpoint for broadcasting data;
• a FILTER endpoint for receiving circulating data.

If preferred nodes are not provided or are unreachable (i.e., a connection cannot be established due to errors or timeouts), the implementation SHOULD use nodes discovered through the network.

bootstrapNodes

This property MUST be provided.

A list of Multiaddr addresses to remote peers that MUST be used for any applicable method of discovery that MAY include:

• DNS Discovery;
• DISCV5;
• PEER-EXCHANGE.

storeConfirmation

This optional property defaults to true.

• If set to true, the stored field on MessageRecord MUST be populated, and implementations MUST employ store‑based reliability as specified in P2P‑RELIABILITY.
• If set to false, the stored field on MessageRecord MUST NOT be populated. For more information about the STORE query and the MessageRecord, refer to the Message Storage API section.

receiveConfirmation

This optional property defaults to true.

• If set to true, the node MUST initiate message‑reception detection as specified in P2P‑RELIABILITY and populate the received field on MessageRecord.
• If set to false, the received field MUST NOT be populated, unless the Subscribe API is invoked.

confirmContentTopics

An optional property that SHOULD be provided in conjunction with either storeConfirmation or receiveConfirmation. It includes an array of contentTopics that the node MUST start monitoring in the background upon initialization, as defined in the TOPICS specification.

Programmatic API / REST API

No methods or REST endpoints are provided for initial configuration. Instead, the initial configuration MUST be supplied at node creation time according to the guidelines of the chosen implementation.

Send

The Send API is responsible for broadcasting messages across the network using the configured protocol. The node SHOULD select the appropriate protocol based on its configuration and the protocols that are mounted:

• If the initial configuration specifies mode: edge, then LIGHTPUSH MUST be used to send messages.
• If the initial configuration specifies mode: relay, then RELAY MUST be used to send messages.

The Send API is also responsible for ensuring message delivery and MUST attempt retries:

• Whenever message loss is detected, in accordance with P2P‑RELIABILITY.
• Implementations MAY choose their own backoff timing, maximum number of retry attempts and prioritization of requests.

Programmatic API

type RequestID = string;

type Message = {
  meta?: UInt8Array;
  timestamp?: number;
  ephemeral?: boolean;
  payload: UInt8Array;
};

interface ISend {
  public send(encoder: Encoder, message: Message): RequestID;
  public cancelRequest(requestId: RequestID): void;
  public getPendingRequests(): RequestID[];
};

Encoder

The Encoder object encapsulates the logic for message handling. It MUST ensure that messages are encoded into the appropriate format for transmission. Additionally, it MUST provide information regarding the pubsubTopic and contentTopic to which messages SHOULD be sent. The specific types of encoders, their extended functionalities, and the mechanisms for their instantiation are considered out of scope for this document.

Message

A Message object MUST conform to the MESSAGE specification.

• The payload property MUST be provided.
• All other properties are optional; if omitted, they SHOULD be supplied by the Encoder.

RequestID

A RequestID is a GUID string that uniquely identifies a message send operation. This GUID MAY be used to cancel a scheduled request or to retrieve information about the associated message from the Message Storage API.

send

An Encoder and a Message MUST be provided as parameters. When invoked, the method schedules the message to be sent via LIGHTPUSH or RELAY based on the node’s configuration. The method MUST throw an error if the pubsubTopic provided by the Encoder is not supported by the underlying node. The method MUST return the associated RequestID for the scheduled send attempt. If the send operation fails, it MAY be retried from the Message Storage API using the RequestID. Additionally, send operation can be monitored by subscribing to message:sent or message:error events described in Event Source API below.

cancelRequest

Cancels a scheduled send attempt associated with a given RequestID. A call to this method MUST be ignored if the request has already been fulfilled (i.e., if it has succeeded, failed, or been canceled previously) or if the provided RequestID is invalid.

getPendingRequests

Returns an array of unique RequestID values corresponding to send operations that are still pending. A request is considered pending if it has not yet succeeded, and it may be actively retrying or scheduled for sending but has not yet been served. No duplicate RequestID values MUST appear in the returned array.

REST API

send

Request:

POST /send HTTP/1.1
Accept: application/json
Content-Type: application/json

{
  "timestamp": 0,
  "ephemeral": false,
  "meta": "ZXhhbXBsZQ==",
  "pubsubTopic": "string",
  "contentTopic": "string",
  "payload": "ZXhhbXBsZQ=="
}

Response:

HTTP/1.1 200 OK
Content-Type: application/json

{
  "requestId": "9978c4f1-4465-4537-9d95-0cf016fb1080"
}

Example for 404:

HTTP/1.1 404 Not Found
Content-Type: application/json

{
  "error": "Failed to send message. Target pubsubTopic 'string' not supported."
}

cancelRequest

Request:

POST /send/cancel HTTP/1.1
Accept: application/json
Content-Type: application/json

{
  "requestId": "9978c4f1-4465-4537-9d95-0cf016fb1080"
}

Response:

HTTP/1.1 200 OK
Content-Type: application/json

{
  "status": "ok"
}

getPendingRequests

Request:

GET /send/requests HTTP/1.1
Accept: application/json

Response:

HTTP/1.1 200 OK
Content-Type: application/json

[
  "9978c4f1-4465-4537-9d95-0cf016fb1080"
]

Subscribe

The Subscribe API SHOULD be used to initiate a subscription over FILTER or RELAY for continuous message retrieval.

Upon invocation of the Subscribe API, implementations MUST:

• Establish a subscription via either the FILTER protocol or the RELAY protocol, based on the node’s configured reception method.
• Ensure active subscriptions comply with the recommendations defined in P2P‑RELIABILITY.

Once the Subscribe API is called, the received property in the MessageRecord (as described in the Message Storage API) MUST be populated.

When the subscription is active, the API MUST trigger the message:* event group as described in the Event Source API section.

Programmatic API

type SubscriptionID = string;

type SubscriptionListener = (message: MessageRecord) => void | Promise<void>;

interface ISubscribe {
  public subscribe(decoder: Decoder, fn: SubscriptionListener): SubscriptionID;
  public unsubscribe(id: SubscriptionID): void;
  public getActiveSubscriptions(): SubscriptionID[];
}

SubscriptionID

A unique identifier (GUID string) representing a subscription. This ID MUST be used to manage active subscriptions, allowing them to be terminated when they are no longer needed.

SubscriptionListener

A callback function that is invoked whenever a new MessageRecord is received. It processes the incoming message and MAY return a Promise to support asynchronous handling. The MessageRecord is defined in the Message Storage API section.

subscribe

Registers a new subscription to listen for messages processed by a given Decoder. The subscription is based on the pubsubTopic and contentTopic provided by the Decoder, which determine the scope of the subscription and the messages to be received. The subscription is uniquely identified by a SubscriptionID, which MUST be used for managing the subscription (e.g., for later unsubscribing). The method MUST throw an error if the pubsubTopic provided by the Decoder is not supported by the underlying node. No specific order is guaranteed for callback invocation; subscription callbacks MUST be executed as messages are received from the protocol in use.

unsubscribe

Removes a previously created subscription identified by its unique SubscriptionID. Once unsubscribed, the associated SubscriptionListener MUST NOT receive any further messages. If the provided SubscriptionID does not correspond to an active subscription, the call MUST be ignored. If recurring STORE query was initiated by this SubscriptionID, it MUST be stopped.

getActiveSubscriptions

Returns an array of unique SubscriptionID values representing all currently active subscriptions. Each identifier corresponds to a subscription that is in effect, and no duplicate values MUST be present in the returned array.

Decoder

The Decoder object encapsulates the logic for processing received messages. It MUST ensure that incoming messages are decoded from their received format into a usable structure. Additionally, it MUST filter messages based on the contentTopic to ensure that only relevant messages are processed. The specific types of decoders, their extended functionalities, and their instantiation mechanisms are considered out of scope for this document.

REST API

Reading messages is performed via the /messages?subscriptionId="<GUID>" endpoint, as detailed in the Message Storage API section.

subscribe

Request:

POST /subscribe HTTP/1.1
Accept: application/json
Content-Type: application/json

{
  "pubsubTopic": "/waku/2/rs/0/2",
  "contentTopic": "/example/2/rfc/proto"
}

Response:

HTTP/1.1 200 OK
Content-Type: application/json

{
  "subscriptionId": "9978c4f1-4465-4537-9d95-0cf016fb1080"
}

Error for 404:

HTTP/1.1 404 Not Found
Content-Type: application/json

{
  "error": "Cannot create subscription. clusterId 0 is not supported."
}

unsubscribe

Request:

POST /unsubscribe HTTP/1.1
Accept: application/json
Content-Type: application/json

{
  "subscriptionId": "9978c4f1-4465-4537-9d95-0cf016fb1080"
}

Response:

HTTP/1.1 200 OK
Content-Type: application/json

{
  "status": "ok"
}

getActiveSubscriptions

Request:

GET /subscriptions HTTP/1.1
Accept: application/json

Response:

HTTP/1.1 200 OK
Content-Type: application/json

[
  "9978c4f1-4465-4537-9d95-0cf016fb1080",
  "a1b2c3d4-5678-90ab-cdef-1234567890ab"
]

Message Storage

The Message Storage API SHOULD be used to retrieve information about messages that have been sent, received, or stored.

Message storage is populated by:

• Messages sent by the underlying node via the Send API.
• Messages received through an active subscription initiated by the Subscribe API.
• Messages fetched using the History API.

Messages can be identified by:

• The message hash as described in the MESSAGE specification.
• The contentTopic associated with the message, as defined in the TOPICS specification.
• The RequestID described in the Send API section.
• The SubscriptionID described in the Subscribe API section.

These identifiers SHOULD be passed to the appropriate methods described below to retrieve or manage messages.

Depending on the presence of the storeConfirmation or receiveConfirmation options in the Initial configuration, the Message Storage API will trigger either the Subscribe API or Acknowledgements routine.

Once a message is added to the Message Storage API, or if any details about it change, the appropriate events from the message:* event family (as described in the Event Source API section) MUST be invoked after the message is added or updated in the underlying storage.

Acknowledgements

Message Acknowledgement mechanism is a background operation that MUST:

• Perform store‑based reliability checks as specified in P2P‑RELIABILITY.
• Halt when the node’s health status transitions to unhealthy (as defined by the Health API).
• Resume when the node’s health status transitions to either minimally healthy or healthy.
• Set the stored or received field on MessageRecord once the message is acknowledged according to store‑based reliability.

This operation MUST be initiated when any of the following conditions is met:

• The storeConfirmation or receiveConfirmation property is true and confirmContentTopics is provided.
• The Subscribe API is invoked for one or more content topics.
• The Send API has successfully sent one or more messages.

For the recurring STORE queries it is RECOMMENDED to prioritize nodes in this order:

1. staticStoreNode specified in the initial configuration.
2. preferredServiceNodes, if provided.
3. Nodes discovered via network discovery.

Programmatic API

type MessageRecord = {
  sending?: boolean;
  sent?: boolean;
  stored: boolean;
  received: boolean;
  requestId?: RequestID;
  message: IWakuMessage;
  error?: unknown;
};

interface MessageStorage {
  getByRequestId(id: RequestID): MessageRecord | undefined;
  getByHash(hash: string, skip?: number, take?: number): MessageRecord | undefined;
  getByContentTopic(contentTopic: string, skip?: number, take?: number): MessageRecord[];
  getBySubscriptionId(id: SubscriptionID, skip?: number, take?: number): MessageRecord[];
}

Properties of MessageRecord

sending

Defaults to false. Indicates whether a message, originating from the underlying node, is currently in the process of being transmitted via the Send API. This property is set to true while the message is actively being sent or during retry attempts. Once the send operation completes (either successfully or if retry attempts are halted), the property MUST transition back to false. This property is not applicable to messages that are received by the node.

sent

Defaults to false. This field is applicable only to messages sent by the underlying node. Indicates whether a message, sent by the underlying node via the Send API, was successfully transmitted. Once a message is sent successfully, the sent property becomes true and remains unchanged. If the transmission fails, the property transitions to false and the error field is populated with implementation-specific details. This update occurs only after the sending property has transitioned back to false.

stored

Defaults to false. Indicates whether a message has been confirmed to be present in the underlying STORE protocol. This property is populated based on a recurring STORE query described in Acknowledgements section or via the History API. Once a message is confirmed as stored, the stored property MUST be updated to true as a final state. If an error occurs during reception, the error field MUST be populated with implementation-specific details.

received

Defaults to false. Indicates whether a message was successfully received from the network via Subscribe API. Once a message is received, the received property MUST be updated to true as a final state. If an error occurs during reception, the error field MUST be populated with implementation-specific details.

requestId

Defaults to null. An optional property applicable only to messages sent by the underlying node via the Send API. When present, it corresponds to the RequestID from the Send API, remains constant once set.

message

This includes, but is not limited to, the following attributes:

• payload: MUST contain the message data payload.
• contentTopic: MUST specify a string identifier used for content-based filtering.
• meta: If present, contains an arbitrary application-specific variable-length byte array (maximum 64 bytes) for supplementary details.
• version: If present, contains a version number to distinguish different types of payload encryption; if omitted, it SHOULD be interpreted as version 0.
• timestamp: If present, indicates the time the message was generated (in Unix epoch nanoseconds); if omitted, it SHOULD be interpreted as 0.
• ephemeral: If present and true, the message is considered transient and SHOULD not be persisted; if omitted or false, the message is considered non-ephemeral.

For a complete description of the message attributes, refer to the MESSAGE specification.

error

An optional property that, if present, indicates that an error occurred during the processing of the message—whether while sending or upon receiving. This may include network, protocol, decoding errors, or other implementation-specific issues. Once set, the error persists; however, if a message that initially encountered an error (e.g., associated with a RequestID) is later successfully transmitted, the error information MUST be cleared.

Methods

getByRequestId

Retrieves the MessageRecord corresponding to the specified RequestID associated with a send request for a particular message. If the provided RequestID is invalid or no associated MessageRecord exists, the method MUST return nothing.

getByHash

Retrieves the MessageRecord corresponding to the provided message hash. The hash is computed deterministically based on the message content, as described in the MESSAGE specification. If the provided hash is invalid or no associated MessageRecord exists, the method MUST return nothing.

getByContentTopic

Retrieves an array of MessageRecord objects corresponding to messages that were circulated under the specified contentTopic. The method accepts two optional parameters for pagination:

• skip: A non-negative integer specifying the number of initial matching records to bypass. If skip exceeds the total number of matching records, the method MUST return an empty array.
• take: A non-negative integer specifying the maximum number of records to return. If take is 0, the method MUST return an empty array. If take is greater than the number of available records, all remaining matching records are returned.

If both skip and take are omitted, the method MUST return all matching records. If no records match the specified contentTopic, an empty array MUST be returned.

getBySubscriptionId

Retrieves an array of MessageRecord objects corresponding to messages received under the specified SubscriptionID (as defined in the Subscribe API section). The method accepts two optional parameters for pagination:

• skip: A non-negative integer specifying the number of initial matching records to bypass. If skip exceeds the total number of matching records, the method MUST return an empty array.
• take: A non-negative integer specifying the maximum number of records to return. If take is 0, the method MUST return an empty array. If take is greater than the number of available records, all remaining matching records are returned.

If both skip and take are omitted, the method MUST return all matching records. If no records match the specified SubscriptionID, an empty array MUST be returned.

REST API

By RequestID

Request:

GET /message?requestId=xyz789 HTTP/1.1
Accept: application/json

Response:

HTTP/1.1 200 OK
Content-Type: application/json

{
  "sending": true,
  "sent": false,
  "stored": false,
  "received": false,
  "requestId": "xyz789",
  "message": {
    "payload": "U29tZSBvdGhlciBkYXRh",
    "contentTopic": "/example/another-topic"
  }
}

Error for 404:

HTTP/1.1 404 Not Found
Content-Type: application/json

{
  "error": "Message with requestId 'xyz789' not found"
}

By hash

Request:

GET /message?hash=abc123 HTTP/1.1
Accept: application/json

Response:

HTTP/1.1 200 OK
Content-Type: application/json

{
  "sending": false,
  "sent": false,
  "stored": true,
  "received": false,
  "message": {
    "payload": "SGVsbG8gd29ybGQ=",
    "contentTopic": "/example/topic"
  }
}

Error for 404:

HTTP/1.1 404 Not Found
Content-Type: application/json

{
  "error": "Message with hash 'abc123' not found"
}

By contentTopic

Request:

GET /messages?contentTopic=/messaging/2/api/utf8&skip=0&take=10 HTTP/1.1
Accept: application/json

Note: If skip and take are omitted, the request URL would be:

GET /messages?contentTopic=/messaging/2/api/utf8 HTTP/1.1

Response:

HTTP/1.1 200 OK
Content-Type: application/json

[
  {
    "sent": false,
    "stored": false,
    "received": true,
    "message": {
      "payload": "SW5pdGlhbCBtZXNzYWdl",
      "contentTopic": "/messaging/2/api/utf8"
    }
  }
]

Error for 404:

HTTP/1.1 404 Not Found
Content-Type: application/json

{
  "error": "No messages found for contentTopic '/messaging/2/api/utf8'"
}

By subscriptionId

Request:

GET /messages?subscriptionId=1692854c-cbde-4afe-901f-1c86ecbd9ea1&skip=0&take=10 HTTP/1.1
Accept: application/json

Note: When omitting pagination parameters, the URL would be:

GET /messages?subscriptionId=1692854c-cbde-4afe-901f-1c86ecbd9ea1 HTTP/1.1

Response:

HTTP/1.1 200 OK
Content-Type: application/json

[
  {
    "sent": false,
    "stored": false,
    "received": true,
    "message": {
      "payload": "SW5pdGlhbCBtZXNzYWdl",
      "contentTopic": "/messaging/2/api/utf8"
    }
  }
]

Error for 404:

HTTP/1.1 404 Not Found
Content-Type: application/json

{
  "error": "No messages found for subscriptionId '1692854c-cbde-4afe-901f-1c86ecbd9ea1'"
}

Health Indicator

The Health Indicator API SHOULD be used to monitor the operational health of a node operating under the Messaging API. The criteria for determining a node’s health state MAY vary depending on the protocols in use and the node’s configuration. Detailed criteria for each health state are provided in the subsequent sections.

For the purposes of this specification, three health states are defined:

• unhealthy: Indicates that the node has lost connectivity for message reception, sending, or both, and as a result, it cannot reliably process or transmit messages.
• minimally healthy: Indicates that the node meets the minimum operational requirements, although performance or reliability may be impacted.
• healthy: Indicates that the node is operating optimally, with full support for message processing and transmission.

Furthermore, any change in the node’s health state MUST trigger a health:change event via the Event Source API immediately after the state transition occurs. Refer to Event Source API for more details.

Health states

unhealthy

Indicates that the node’s connectivity is insufficient for reliable operation. In this state:

• No connections to service nodes are available, regardless of protocol.
• No peers are present in the RELAY mesh.

minimally healthy

Indicates that the node meets the minimum connectivity requirements necessary to function, although performance or reliability may be compromised. In this state:

• The node has at least one connection to a service node implementing FILTER and one connection to a service node implementing LIGHTPUSH.
• The RELAY mesh includes connections to at least four other peers.

healthy

Indicates that the node’s connectivity meets or exceeds optimal operational thresholds. In this state:

• The node has at least two connections to service nodes implementing FILTER and at least two connections to service nodes implementing LIGHTPUSH.
• The RELAY mesh includes connections to at least six other peers.

Programmatic API

enum HealthStatus {
  Unhealthy = "Unhealthy",
  MinimallyHealthy = "MinimallyHealthy",
  Healthy = "Healthy"
}

node.healthIndicator == "MinimallyHealthy";

REST API

Request:

GET /health HTTP/1.1
Accept: application/json

Response:

HTTP/1.1 200 OK
Content-Type: application/json

{
  status: "MinimallyHealthy"
}

Event source

One component of the Messaging API is an event emitter that SHOULD be used to track various internal activities. Consumers MAY subscribe to this event source to monitor message propagation, network changes, or the health status of the node. Events are dispatched only after an actual change to the underlying data occurs, ensuring that notifications reflect genuine updates.

For accessing events via the REST API, long polling SHOULD be used.

Programmatic API

type EventHandler = (event: CustomEvent<unknown>): void;

interface IEvents {
  public addEventListener(eventName: string, fn: EventHandler): void;
  public removeEventListener(eventName: string, fn: EventHandler): void;
}

CustomEvent

A container object that holds the payload of an event along with implementation-specific metadata. The detail property carries the event payload, while other metadata may vary based on the Waku implementation.

EventHandler

A callback function that is invoked whenever an event with a supported eventName is dispatched. Event handlers are triggered in the order in which they were added (i.e., in the order of subscription). The function receives a CustomEvent containing the event payload.

addEventListener

Registers an event listener for a specified eventName using the provided EventHandler. If the given eventName is not supported, the call MUST be silently ignored. Additionally, if an exception is thrown within the function passed to addEventListener, that error MUST be ignored and not affect subsequent event handling.

removeEventListener

Removes a previously registered event listener for the specified eventName and EventHandler. If the eventName is not supported or the EventHandler was not previously registered, the call MUST be silently ignored.

Events

health:change

This event MUST be emitted whenever the node’s health state changes, as determined by the Health Indicator API. The event’s payload (accessible via event.detail) is the new HealthStatus value (Unhealthy, MinimallyHealthy, or Healthy). The event is dispatched immediately after the underlying data is updated to reflect the health state change.

Programmatic API:

node.events.addEventListener("health:change", (event: CustomEvent<HealthStatus>) => {
  // event.detail holds the new HealthStatus value
  console.log(event.detail);
});

For accessing health change events via the REST API, long polling SHOULD be used. Refer to Health Indicator API section for REST API endpoint.

message:change

This event MUST be dispatched whenever any of the key properties of a MessageRecord change. Specifically stored, received,sent or sending. The event payload (accessible via event.detail) is the updated MessageRecord reflecting the changes.

node.events.addEventListener("message:change", (event: CustomEvent<MessageRecord>) => {
  // event.detail holds the updated MessageRecord
  console.log(event.detail);
});

For the REST API, long polling over the Message Store API SHOULD be used.

message:sent

This event MUST be dispatched immediately after a message that originated from the underlying node transitions from being in the sending state (i.e., when sending becomes false) to a state where it is confirmed as successfully transmitted (i.e., sent becomes true). The payload is the MessageRecord reflecting this updated status.

node.events.addEventListener("message:sent", (event: CustomEvent<MessageRecord>) => {
  // event.detail holds the updated MessageRecord
  console.log(event.detail);
});

For the REST API, long polling over the Message Store API SHOULD be used.

message:error

This event MUST be dispatched when an error occurs during the processing of a message whether while sending or receiving. In such cases, the error property of the corresponding MessageRecord is populated with implementation-specific error information. The event payload is the MessageRecord containing the error details. Once a previously errored message is successfully transmitted, the error information MUST be cleared and an updated event (such as message:sent or message:change) should be dispatched.

node.events.addEventListener("message:error", (event: CustomEvent<MessageRecord>) => {
  // event.detail holds the updated MessageRecord
  console.log(event.detail);
});

For the REST API, long polling over the Message Store API SHOULD be used.

message:received

This event MUST be dispatched when a message is successfully received from the network via the Subscribe API. The payload is the updated MessageRecord.

node.events.addEventListener("message:received", (event: CustomEvent<MessageRecord>) => {
  // event.detail holds the updated MessageRecord
  console.log(event.detail);
});

For the REST API, long polling over the Message Store API SHOULD be used.

message:stored

This event MUST be dispatched when a message is confirmed to be stored in accordance with Acknowledgements section. The payload is the updated MessageRecord.

node.events.addEventListener("message:stored", (event: CustomEvent<MessageRecord>) => {
  // event.detail holds the updated MessageRecord
  console.log(event.detail);
});

For the REST API, long polling over the Message Store API SHOULD be used.

Security/Privacy Considerations

See WAKU2-ADVERSARIAL-MODELS.

Copyright

Copyright and related rights waived via CC0.