specs/standards/application/reliable-channel-api.md

title	name	category	status	tags	editor
RELIABLE-CHANNEL-API	Reliable Channel API definition	Standards Track	raw	reliability application api sds segmentation	Logos Messaging Team

Table of contents

• Table of contents
• Abstract
• Motivation
• Syntax
• API design
  • Architectural position
  • IDL
• Components
  • Segmentation
  • Scalable Data Sync (SDS)
  • Rate Limit Manager
  • Encryption Hook
• Procedures
  • State management
  • Outgoing message processing
  • Incoming message processing
  • Retransmission
  • Rate limiting
  • Encryption
• The Reliable Channel API
  • Type definitions
  • Channel lifecycle
  • Channel usage
• Security/Privacy Considerations
• Copyright

Abstract

This document specifies the Reliable Channel API, an application-level interface that sits between the application layer and the MESSAGING-API plus P2P-RELIABILITY, i.e., application <-> reliable-channel-api <-> messaging-api/p2p-reliability.

It bundles segmentation, end-to-end reliability via Scalable Data Sync (SDS), rate limit management, and a pluggable encryption hook into a single interface for sending and receiving messages reliably.

Motivation

The MESSAGING-API provides peer-to-peer reliability via P2P-RELIABILITY, but does not provide high end-to-end delivery guarantees from sender to recipient.

This API addresses that gap by introducing:

• SEGMENTATION-API to handle large messages exceeding network size limits.
• SDS to provide causal-history-based end-to-end acknowledgement and retransmission.
• Rate Limit Manager to comply with RLN constraints when sending segmented messages.
• Encryption Hook to allow upper layers to provide a pluggable encryption mechanism. The main motivation for encryption is to protect the payload.

The separation between Reliable Channels and encryption ensures the API remains agnostic to identity and key management concerns, which are handled by higher layers.

Syntax

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119.

API design

Architectural position

The Reliable Channel API sits between the application layer and the Messaging API, as follows:

┌────────────────────────────────────────────────────────────┐
│                   Application Layer                        │
└───────────────────────────┬────────────────────────────────┘
                            │
┌───────────────────────────▼────────────────────────────────┐
│                 Reliable Channel API                       │
│  ┌──────────────┐ ┌─────┐ ┌───────────────┐ ┌──────────┐   │
│  │ Segmentation │ │ SDS │ │ Rate Limit Mgr│ │Encryption│   │
│  │              │ │     │ │               │ │   Hook   │   │
│  └──────────────┘ └─────┘ └───────────────┘ └──────────┘   │
└───────────────────────────┬────────────────────────────────┘
                            │
┌───────────────────────────▼────────────────────────────────┐
│                    Messaging API                           │
│      (P2P Reliability, Relay, Filter, Lightpush, Store)    │
└────────────────────────────────────────────────────────────┘

IDL

A custom Interface Definition Language (IDL) in YAML is used, consistent with MESSAGING-API.

Components

Segmentation

See SEGMENTATION-API.

Scalable Data Sync (SDS)

SDS provides end-to-end delivery guarantees using causal history tracking.

• Each sent chunk is registered in an outgoing buffer.
• The recipient sends acknowledgements back to the sender upon receiving chunks.
• The sender removes acknowledged chunks from the outgoing buffer.
• Unacknowledged chunks are retransmitted after acknowledgementTimeoutMs.
• SDS state MUST be persisted using the persistence backend configured in SdsConfig.

Rate Limit Manager

The Rate Limit Manager ensures compliance with RLN rate constraints.

• It tracks how many messages have been sent in the current epoch (only the first chunk of each message counts toward the rate limit; subsequent chunks are exempt).
• When the limit is approached, chunk dispatch MUST be delayed to the next epoch.
• The epoch size MUST match the epochSizeMs configured in RateLimitConfig.

Encryption Hook

The Encryption Hook provides a pluggable interface for upper layers to inject encryption.

• The hook is optional; when not provided, messages are sent unencrypted.
• Encryption is applied per chunk, after segmentation and SDS registration.
• Decryption is applied per chunk, before SDS delivery.
• The IEncryption interface MUST be implemented by the caller.
• The Reliable Channel API MUST NOT impose any specific encryption scheme.

Procedures

State management

Each ReliableChannel MUST maintain internal state for SDS, keyed by channelId. This state MAY be persisted within the SDS implementation layer and includes:

• A committed message log recording sent messages and their acknowledgement status.
• An outgoing buffer of unacknowledged message chunks pending confirmation.
• An incoming buffer for partially received segmented messages awaiting full reassembly.

The state MUST be persisted using the persistence backend specified in SdsConfig.

Outgoing message processing

When send is called, the implementation MUST process message in the following order:

1. Segment: Split the payload into chunks as defined in SEGMENTATION-API.
2. Apply SDS: Register each chunk with the SDS layer to track acknowledgements and enable retransmission.
3. Encrypt: If an IEncryption implementation is provided, encrypt each chunk before transmission.
4. Rate Limit: If RateLimitConfig.enabled is true, delay dispatch as needed to comply with RLN epoch constraints.
5. Dispatch: Send each chunk via the underlying MESSAGING-API.

Incoming message processing

When a chunk is received from the network, the implementation MUST process it in the following order:

1. Decrypt: If an IEncryption implementation is provided, decrypt the chunk.
2. Apply SDS: Deliver the chunk to the SDS layer, which emits acknowledgements and detects gaps.
3. Reassemble: Once all chunks for a message have been received, reassemble and emit a reliable:message:received event.

Retransmission

A certain Reliable Channel MUST retransmit unacknowledged chunks after acknowledgementTimeoutMs, according to the SDS channel state, up to maxRetransmissions times. If a chunk is not acknowledged after all retransmission attempts, a reliable:message:send-error event MUST be emitted.

Rate limiting

When RateLimitConfig.enabled is true, the implementation MUST space chunk transmissions to comply with the RLN epoch constraints defined in epochSizeMs. Chunks MUST NOT be sent at a rate that would violate the RLN message rate limit for the active epoch.

Encryption

The encryption parameter in createReliableChannel is intentionally optional. The Reliable Channel API is agnostic to encryption mechanisms.

When an IEncryption implementation is provided, it MUST be applied as described in Outgoing message processing and Incoming message processing.

The Reliable Channel API

This API considers the types defined by MESSAGING-API plus the following (including SdsConfig and RateLimitConfig). It also extends NodeConfig, defined in MESSAGING-API, with sds_config and rate_limit_config fields, whose types are defined here.

Type definitions

types:
  ReliableSendId:
    type: string
    description: "Unique identifier for a single `send` operation on a reliable channel.
    It groups all chunks produced by segmenting one message, so callers can correlate
    acknowledgement and error events back to the original send call.
    Internally, each chunk is dispatched as an independent [MESSAGING-API](/standards/application/messaging-api.md) call,
    producing one `RequestId` (as defined in [MESSAGING-API](/standards/application/messaging-api.md)) per chunk.
    A single `ReliableSendId` therefore maps to one or more underlying `RequestId` values,
    one per chunk sent."

  IEncryption:
    type: object
    description: "Interface for a pluggable encryption mechanism.
    When provided as a parameter to `createReliableChannel`, the API consumer MUST implement both encrypt and decrypt operations.
    Implementations MAY use different signatures than those described below, as long as each operation accepts a byte array and returns a byte array."
    fields:
      encrypt:
        type: function
        description: "Encrypts a byte payload. Returns the encrypted payload."
        parameters:
          - name: content
            type: array<byte>
        returns:
          type: result<array<byte>, error>
      decrypt:
        type: function
        description: "Decrypts a byte payload. Returns the decrypted payload."
        parameters:
          - name: payload
            type: array<byte>
        returns:
          type: result<array<byte>, error>

  IPersistence:
    type: object
    description: "Interface for a pluggable SDS persistence backend.
    Implementations MUST provide all functions required to save and retrieve SDS state per channel. Implementations MUST also provide the persistence method of interest, e.g., SQLite, custom encrypted storage, etc.
    Refer to the [SDS spec](https://lip.logos.co/ift-ts/raw/sds.html) for the full definition of what state must be persisted."

  ReliableChannel:
    type: object
    description: "A handle representing an open reliable channel.
    Returned by `createReliableChannel` and used to send messages and receive events.
    Internal state (SDS, segmentation, encryption) is managed by the implementation."
    fields:
      messageEvents:
        type: MessageEvents
        description: "Event emitter for reliable message events scoped to this channel."

      rateLimitConfig:
        type: RateLimitConfig
        default: DefaultRateLimitConfig
        description: "Configuration for rate limit management."

  NodeConfig:  # Extends NodeConfig defined in MESSAGING-API
    fields:
      sds_config:
        type: SdsConfig
        description: "SDS configuration. See SdsConfig defined in this spec."
      rate_limit_config:
        type: RateLimitConfig
        description: "Rate limiting configuration, including RLN-specific attributes. See RateLimitConfig defined in this spec."

  SdsConfig:
    type: object
    description: Scalable Data Sync config items.
    fields:
      persistence:
        type: IPersistence
        description: "Backend for persisting the SDS local history. Implementations MAY support custom backends."
      acknowledgementTimeoutMs:
        type: uint
        default: 5000
        description: "Time in milliseconds to wait for acknowledgement before retransmitting."
      maxRetransmissions:
        type: uint
        default: 5
        description: "Maximum number of retransmission attempts before considering delivery failed."
      causalHistorySize:
        type: uint
        default: 2
        description: "Number of message IDs to consider in the causal history. With longer value, a stronger correctness is guaranteed but it requires higher bandwidth and memory."

  RateLimitConfig:
    type: object
    description: Rate limiting configuration, containing RLN-specific attributes.
    fields:
      enabled:
        type: bool
        default: false
        description: "Whether rate limiting is enforced. SHOULD be true when RLN is active."
      epochSizeMs:
        type: uint
        default: 600000  # 10 minutes
        description: "The epoch size used by the RLN relay, in milliseconds."

  MessageReceivedEvent:
    type: object
    description: "Event emitted when a complete message has been received and reassembled."
    fields:
      message:
        type: array<byte>
        description: "The reassembled message payload."

  MessageSentEvent:
    type: object
    description: "Event emitted when all chunks of a message have been acknowledged by the network."
    fields:
      requestId:
        type: ReliableSendId
        description: "The identifier of the `send` operation whose chunks have all been acknowledged."

  MessageSendErrorEvent:
    type: object
    description: "Event emitted when a message send operation fails after exhausting retransmission attempts."
    fields:
      requestId:
        type: ReliableSendId
        description: "The identifier of the `send` operation that failed after exhausting retransmission attempts."
      error:
        type: string
        description: "Error message describing what went wrong"

  MessageEvents:
    type: event_emitter
    description: "Event source for reliable message events on a channel"
    events:
      "reliable:message:received":
        type: MessageReceivedEvent
      "reliable:message:sent":
        type: MessageSentEvent
      "reliable:message:send-error":
        type: MessageSendErrorEvent

Channel lifecycle

functions:

  createReliableChannel:
    description: "Opens a reliable channel over the given content topic. Sets up the required SDS state,
    segmentation, and encryption, and subscribes to `contentTopic` via the underlying
    [MESSAGING-API](/standards/application/messaging-api.md)."
    parameters:
      - name: node
        type: WakuNode
        description: "The underlying messaging node, as defined in [MESSAGING-API](/standards/application/messaging-api.md).
        Used to send chunks and to subscribe/unsubscribe to the content topics."
      - name: channelId
        type: string
        description: "Unique identifier for this channel. Represents the reliable (SDS), segmented, and optionally-encrypted session."
      - name: contentTopic
        type: string
        description: "The topic this channel listens and sends on. This has routing and filtering connotations."
      - name: senderId
        type: string
        description: "An identifier for this sender. SHOULD be unique and persisted between sessions."
      - name: encryption
        type: optional<IEncryption>
        default: none
        description: "Optional pluggable encryption implementation. If none, messages are sent unencrypted."
    returns:
      type: result<ReliableChannel, error>

  closeChannel:
    description: "Closes a reliable channel, releases all associated resources and internal state,
    and unsubscribes from its content topic via the underlying [MESSAGING-API](/standards/application/messaging-api.md)."
    parameters:
      - name: channel
        type: ReliableChannel
        description: "The channel handle returned by `createReliableChannel`."
    returns:
      type: result<void, error>

Channel usage

functions:
  send:
    description: "Send a message through a reliable channel. The message is always segmented,
    SDS-tracked, rate-limited, and encrypted (if configured)."
    parameters:
      - name: channel
        type: ReliableChannel
        description: "The channel handle returned by `createReliableChannel`."
      - name: message
        type: array<byte>
        description: "The raw message payload to send."
    returns:
      type: result<ReliableSendId, error>
      description: "Returns a `ReliableSendId` that callers can use to correlate subsequent `MessageSentEvent` or `MessageSendErrorEvent` events."

Incoming events are emitted on channel.messageEvents as defined by MessageEvents.

Security/Privacy Considerations

• This API does not provide confidentiality by default. An IEncryption implementation MUST be supplied when confidentiality is required.
• Chunk metadata (message ID, chunk index, total chunks) is visible to network observers unless encrypted by the hook.
• SDS acknowledgement messages are sent over the same content topic and are subject to the same confidentiality concerns.
• Rate limiting compliance is required to avoid exclusion from the network by RLN-enforcing relays.

Copyright

Copyright and related rights waived via CC0.