mirror of
https://github.com/logos-blockchain/lez-programs.git
synced 2026-08-25 14:11:09 +00:00
r4bbit
d045dca1f1
Migrate the active-pool branch of the liquidity form onto the new addLiquidity
op (quoting stays on legacy quoteNewPosition for now, as agreed).
- AmmUiBackend: add the addLiquidity QtRO slot; forwards to the module and
refreshes balances (mirrors createPool).
- NewPositionFlow: route the active-pool confirm to addLiquidity, minting a
fresh LP holding then submitting {tokenA/B, holdingA/B, lpHolding, maxAmountA/B,
minLpRaw, deadline}. minLpRaw comes from the legacy quote's minimumLpRaw.
- NewPositionForm: show the per-side account selectors in add mode; gate the CTA
on both holdings and on the deposit amounts being present (hasDepositAmounts) —
the pair's probe quote otherwise reports canSubmit on simulated amounts and
wrongly enables the button before any amount is entered.
- amm_ffi: fix add_liquidity_plan to orient the (max amount, holding) pair to the
pool's STORED definition order, not is_canonical_pair — a pool created outside
the FFI (the testnet setup's spel new-definition) can store a non-canonical
order, which otherwise sent a holding into the wrong vault (Transfer
sender/recipient definition mismatch). Test uses a non-canonical pool.
Adds add-liquidity.mjs: asserts the CTA stays disabled with no amounts, submits
an add to the seeded A/B pool, and verifies reserveA grew on-chain.
89 lines
4.1 KiB
Markdown
89 lines
4.1 KiB
Markdown
# AMM UI tests
|
|
|
|
UI-driven tests for the AMM app, driving the running app through the QML
|
|
inspector (framework from
|
|
[`logos-co/logos-qt-mcp`](https://github.com/logos-co/logos-qt-mcp)):
|
|
|
|
- `swap.mjs` selects two tokens, enters an amount, submits a swap, and verifies
|
|
the **A/B** pool reserves changed **on-chain**.
|
|
- `create-pool.mjs` selects the **A/C** pair (which the setup script leaves
|
|
unseeded — only A/B is created), submits a pool creation, and verifies the A/C
|
|
pool now exists **on-chain**.
|
|
- `add-liquidity.mjs` selects the seeded **A/B** pair, asserts the CTA stays
|
|
disabled until deposit amounts are entered, submits an add, and verifies the
|
|
A/B pool reserves grew **on-chain**.
|
|
|
|
## Isolation
|
|
|
|
Test runs never touch your personal setup. Everything test-related lives under
|
|
`apps/amm/tests/testnet/` and is git-ignored:
|
|
|
|
| Concern | Test (isolated) | Your local dev |
|
|
| --- | --- | --- |
|
|
| Wallet home | `apps/amm/tests/testnet/.wallet/` | `~/.lee/wallet/` |
|
|
| Token config | `apps/amm/tests/testnet/amm-tokens.json` | `apps/amm/amm-tokens.json` |
|
|
|
|
`testnet/setup-amm-testnet.sh` bootstraps an isolated wallet from a **fixed
|
|
mnemonic** (`test test … junk`) so the token/holding account ids are
|
|
deterministic and reproducible across machines, then deploys the programs,
|
|
creates a seeded pool, and writes the test token config.
|
|
|
|
## Full isolated run
|
|
|
|
From the **repo root**, with `wallet` / `spel` / `cargo` / `nix` on `PATH`, a
|
|
local sequencer running, and the guest binaries built (`make build-programs`):
|
|
|
|
```bash
|
|
# 0. Once: build the JS test framework (symlinked where swap.mjs expects it)
|
|
nix build .#test-framework -o apps/amm/result-mcp
|
|
|
|
# 1. Bootstrap the isolated wallet + deploy programs + create the pool.
|
|
# Writes apps/amm/tests/testnet/{.wallet, amm-tokens.json}. Nothing else is touched.
|
|
TEST_SEQUENCER_ADDR=http://127.0.0.1:3040 apps/amm/tests/testnet/setup-amm-testnet.sh
|
|
|
|
# 2. Terminal 1 — launch the UI against ONLY the isolated wallet + test tokens.
|
|
LEE_WALLET_HOME_DIR=$(pwd)/apps/amm/tests/testnet/.wallet \
|
|
AMM_PROGRAM_BIN=$(pwd)/programs/amm/methods/guest/target/riscv32im-risc0-zkvm-elf/docker/amm.bin \
|
|
TOKENS_CONFIG=$(pwd)/apps/amm/tests/testnet/amm-tokens.json \
|
|
nix run .#amm-ui
|
|
|
|
# 3. Terminal 2 — drive a test; watch it click through the live UI.
|
|
node apps/amm/tests/swap.mjs # swap against the seeded A/B pool
|
|
node apps/amm/tests/create-pool.mjs # create the (unseeded) A/C pool
|
|
node apps/amm/tests/add-liquidity.mjs # add liquidity to the seeded A/B pool
|
|
```
|
|
|
|
Headless CI variant (no window, launches the app itself, pass/fail only):
|
|
|
|
```bash
|
|
nix build .#integration-test -L
|
|
```
|
|
|
|
## Notes
|
|
|
|
- **Wallet password.** The wallet's key storage is encrypted with a password —
|
|
the one you enter to **unlock** it (the UI's **Connect** modal) so the app can
|
|
sign transactions. First-time setup reads a throwaway password (the script
|
|
feeds it via stdin, so it doesn't block), then `restore-keys` rebuilds the
|
|
wallet from the test mnemonic and sets the **real** password to
|
|
`TEST_WALLET_PASSWORD` (default `test`). So **unlock the UI with `test`**.
|
|
Prefer no password? Run with `TEST_WALLET_PASSWORD=""` and unlock with an empty
|
|
password.
|
|
- **Re-bootstrap.** `FORCE_BOOTSTRAP=1 apps/amm/tests/testnet/setup-amm-testnet.sh`
|
|
re-restores the isolated `.wallet` (rewrites only that directory).
|
|
- **Overrides.** `TEST_WALLET_HOME`, `TEST_MNEMONIC`, `TEST_WALLET_PASSWORD`,
|
|
`TEST_WALLET_DEPTH`, `TEST_SEQUENCER_ADDR` — see the script header.
|
|
- **Framework location.** `swap.mjs` loads `../result-mcp` by default; override
|
|
with `LOGOS_QT_MCP=/abs/path/to/result-mcp`.
|
|
- **Artifacts.** On failure `swap.mjs` prints the `SwapCard` state and saves
|
|
`apps/amm/tests/swap-*.png` (git-ignored) for inspection.
|
|
|
|
## Files
|
|
|
|
- `swap.mjs` — the end-to-end swap UI test (A/B pool).
|
|
- `create-pool.mjs` — the end-to-end create-pool UI test (creates the A/C pool).
|
|
- `add-liquidity.mjs` — the end-to-end add-liquidity UI test (adds to the A/B pool).
|
|
- `testnet/setup-amm-testnet.sh` — isolated testnet + wallet bootstrap (TKA/TKB/TKC,
|
|
seeds the A/B pool only).
|
|
- `qml/`, `cpp/` — the module's own QML/C++ unit tests.
|