Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
## Nim-LibP2P
|
|
|
|
## Copyright (c) 2020 Status Research & Development GmbH
|
|
|
|
## Licensed under either of
|
|
|
|
## * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE))
|
|
|
|
## * MIT license ([LICENSE-MIT](LICENSE-MIT))
|
|
|
|
## at your option.
|
|
|
|
## This file may not be copied, modified, or distributed except according to
|
|
|
|
## those terms.
|
|
|
|
|
2020-09-06 08:31:47 +00:00
|
|
|
import std/[oids, strformat]
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
import chronos
|
|
|
|
import chronicles
|
2020-07-07 11:14:11 +00:00
|
|
|
import bearssl
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
import stew/[endians2, byteutils]
|
2020-07-07 11:14:11 +00:00
|
|
|
import nimcrypto/[utils, sha2, hmac]
|
2020-07-09 08:53:19 +00:00
|
|
|
import ../../stream/[connection, streamseq]
|
2020-07-01 06:25:09 +00:00
|
|
|
import ../../peerid
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
import ../../peerinfo
|
|
|
|
import ../../protobuf/minprotobuf
|
2020-03-23 06:03:36 +00:00
|
|
|
import ../../utility
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
import secure,
|
2020-07-09 08:53:19 +00:00
|
|
|
../../crypto/[crypto, chacha20poly1305, curve25519, hkdf]
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-09-15 09:16:43 +00:00
|
|
|
when defined(libp2p_dump):
|
|
|
|
import ../../debugutils
|
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
logScope:
|
2020-06-10 08:48:01 +00:00
|
|
|
topics = "noise"
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
|
|
|
const
|
|
|
|
# https://godoc.org/github.com/libp2p/go-libp2p-noise#pkg-constants
|
|
|
|
NoiseCodec* = "/noise"
|
2020-04-05 02:43:05 +00:00
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
PayloadString = "noise-libp2p-static-key:"
|
|
|
|
|
|
|
|
ProtocolXXName = "Noise_XX_25519_ChaChaPoly_SHA256"
|
|
|
|
|
|
|
|
# Empty is a special value which indicates k has not yet been initialized.
|
2020-07-09 08:53:19 +00:00
|
|
|
EmptyKey = default(ChaChaPolyKey)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
NonceMax = uint64.high - 1 # max is reserved
|
2020-03-25 07:10:11 +00:00
|
|
|
NoiseSize = 32
|
|
|
|
MaxPlainSize = int(uint16.high - NoiseSize - ChaChaPolyTag.len)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-08-04 08:04:16 +00:00
|
|
|
HandshakeTimeout = 1.minutes
|
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
type
|
|
|
|
KeyPair = object
|
|
|
|
privateKey: Curve25519Key
|
|
|
|
publicKey: Curve25519Key
|
2020-04-05 02:43:05 +00:00
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
# https://noiseprotocol.org/noise.html#the-cipherstate-object
|
|
|
|
CipherState = object
|
|
|
|
k: ChaChaPolyKey
|
|
|
|
n: uint64
|
|
|
|
|
|
|
|
# https://noiseprotocol.org/noise.html#the-symmetricstate-object
|
|
|
|
SymmetricState = object
|
|
|
|
cs: CipherState
|
|
|
|
ck: ChaChaPolyKey
|
|
|
|
h: MDigest[256]
|
|
|
|
|
|
|
|
# https://noiseprotocol.org/noise.html#the-handshakestate-object
|
|
|
|
HandshakeState = object
|
|
|
|
ss: SymmetricState
|
|
|
|
s: KeyPair
|
|
|
|
e: KeyPair
|
|
|
|
rs: Curve25519Key
|
|
|
|
re: Curve25519Key
|
|
|
|
|
|
|
|
HandshakeResult = object
|
|
|
|
cs1: CipherState
|
|
|
|
cs2: CipherState
|
|
|
|
remoteP2psecret: seq[byte]
|
|
|
|
rs: Curve25519Key
|
2020-04-05 02:43:05 +00:00
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
Noise* = ref object of Secure
|
2020-07-07 11:14:11 +00:00
|
|
|
rng: ref BrHmacDrbgContext
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
localPrivateKey: PrivateKey
|
2020-07-09 08:53:19 +00:00
|
|
|
localPublicKey: seq[byte]
|
2020-07-07 11:14:11 +00:00
|
|
|
noiseKeys: KeyPair
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
commonPrologue: seq[byte]
|
|
|
|
outgoing: bool
|
|
|
|
|
|
|
|
NoiseConnection* = ref object of SecureConn
|
|
|
|
readCs: CipherState
|
|
|
|
writeCs: CipherState
|
|
|
|
|
|
|
|
NoiseHandshakeError* = object of CatchableError
|
|
|
|
NoiseDecryptTagError* = object of CatchableError
|
|
|
|
NoiseOversizedPayloadError* = object of CatchableError
|
|
|
|
NoiseNonceMaxError* = object of CatchableError # drop connection on purpose
|
|
|
|
|
|
|
|
# Utility
|
|
|
|
|
2020-09-06 08:31:47 +00:00
|
|
|
func shortLog*(conn: NoiseConnection): auto =
|
|
|
|
if conn.isNil: "NoiseConnection(nil)"
|
|
|
|
elif conn.peerInfo.isNil: $conn.oid
|
|
|
|
else: &"{shortLog(conn.peerInfo.peerId)}:{conn.oid}"
|
|
|
|
chronicles.formatIt(NoiseConnection): shortLog(it)
|
|
|
|
|
2020-07-07 11:14:11 +00:00
|
|
|
proc genKeyPair(rng: var BrHmacDrbgContext): KeyPair =
|
2020-07-09 08:53:19 +00:00
|
|
|
result.privateKey = Curve25519Key.random(rng)
|
2020-08-04 09:19:26 +00:00
|
|
|
result.publicKey = result.privateKey.public()
|
2020-04-05 02:43:05 +00:00
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
proc hashProtocol(name: string): MDigest[256] =
|
|
|
|
# If protocol_name is less than or equal to HASHLEN bytes in length,
|
|
|
|
# sets h equal to protocol_name with zero bytes appended to make HASHLEN bytes.
|
|
|
|
# Otherwise sets h = HASH(protocol_name).
|
|
|
|
|
|
|
|
if name.len <= 32:
|
|
|
|
result.data[0..name.high] = name.toBytes
|
|
|
|
else:
|
|
|
|
result = sha256.digest(name)
|
|
|
|
|
|
|
|
proc dh(priv: Curve25519Key, pub: Curve25519Key): Curve25519Key =
|
2020-08-04 09:19:26 +00:00
|
|
|
result = pub
|
|
|
|
Curve25519.mul(result, priv)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
|
|
|
# Cipherstate
|
|
|
|
|
|
|
|
proc hasKey(cs: CipherState): bool =
|
|
|
|
cs.k != EmptyKey
|
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
proc encryptWithAd(state: var CipherState, ad, data: openArray[byte]): seq[byte] =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
var
|
|
|
|
tag: ChaChaPolyTag
|
|
|
|
nonce: ChaChaPolyNonce
|
2020-07-09 08:53:19 +00:00
|
|
|
nonce[4..<12] = toBytesLE(state.n)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
result = @data
|
|
|
|
ChaChaPoly.encrypt(state.k, nonce, tag, result, ad)
|
|
|
|
inc state.n
|
|
|
|
if state.n > NonceMax:
|
|
|
|
raise newException(NoiseNonceMaxError, "Noise max nonce value reached")
|
|
|
|
result &= tag
|
2020-03-23 06:03:36 +00:00
|
|
|
trace "encryptWithAd", tag = byteutils.toHex(tag), data = result.shortLog, nonce = state.n - 1
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
proc decryptWithAd(state: var CipherState, ad, data: openArray[byte]): seq[byte] =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
var
|
2020-07-09 08:53:19 +00:00
|
|
|
tagIn = data.toOpenArray(data.len - ChaChaPolyTag.len, data.high).intoChaChaPolyTag
|
|
|
|
tagOut: ChaChaPolyTag
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
nonce: ChaChaPolyNonce
|
2020-07-09 08:53:19 +00:00
|
|
|
nonce[4..<12] = toBytesLE(state.n)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
result = data[0..(data.high - ChaChaPolyTag.len)]
|
|
|
|
ChaChaPoly.decrypt(state.k, nonce, tagOut, result, ad)
|
2020-03-23 06:03:36 +00:00
|
|
|
trace "decryptWithAd", tagIn = tagIn.shortLog, tagOut = tagOut.shortLog, nonce = state.n
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
if tagIn != tagOut:
|
2020-08-08 06:52:20 +00:00
|
|
|
debug "decryptWithAd failed", data = shortLog(data)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
raise newException(NoiseDecryptTagError, "decryptWithAd failed tag authentication.")
|
|
|
|
inc state.n
|
|
|
|
if state.n > NonceMax:
|
|
|
|
raise newException(NoiseNonceMaxError, "Noise max nonce value reached")
|
|
|
|
|
|
|
|
# Symmetricstate
|
|
|
|
|
|
|
|
proc init(_: type[SymmetricState]): SymmetricState =
|
|
|
|
result.h = ProtocolXXName.hashProtocol
|
|
|
|
result.ck = result.h.data.intoChaChaPolyKey
|
|
|
|
result.cs = CipherState(k: EmptyKey)
|
|
|
|
|
|
|
|
proc mixKey(ss: var SymmetricState, ikm: ChaChaPolyKey) =
|
|
|
|
var
|
|
|
|
temp_keys: array[2, ChaChaPolyKey]
|
|
|
|
sha256.hkdf(ss.ck, ikm, [], temp_keys)
|
|
|
|
ss.ck = temp_keys[0]
|
|
|
|
ss.cs = CipherState(k: temp_keys[1])
|
2020-03-23 06:03:36 +00:00
|
|
|
trace "mixKey", key = ss.cs.k.shortLog
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
proc mixHash(ss: var SymmetricState; data: openArray[byte]) =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
var ctx: sha256
|
|
|
|
ctx.init()
|
|
|
|
ctx.update(ss.h.data)
|
|
|
|
ctx.update(data)
|
|
|
|
ss.h = ctx.finish()
|
2020-03-23 06:03:36 +00:00
|
|
|
trace "mixHash", hash = ss.h.data.shortLog
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
|
|
|
# We might use this for other handshake patterns/tokens
|
2020-07-09 08:53:19 +00:00
|
|
|
proc mixKeyAndHash(ss: var SymmetricState; ikm: openArray[byte]) {.used.} =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
var
|
|
|
|
temp_keys: array[3, ChaChaPolyKey]
|
|
|
|
sha256.hkdf(ss.ck, ikm, [], temp_keys)
|
|
|
|
ss.ck = temp_keys[0]
|
|
|
|
ss.mixHash(temp_keys[1])
|
|
|
|
ss.cs = CipherState(k: temp_keys[2])
|
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
proc encryptAndHash(ss: var SymmetricState, data: openArray[byte]): seq[byte] =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
# according to spec if key is empty leave plaintext
|
|
|
|
if ss.cs.hasKey:
|
|
|
|
result = ss.cs.encryptWithAd(ss.h.data, data)
|
|
|
|
else:
|
|
|
|
result = @data
|
|
|
|
ss.mixHash(result)
|
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
proc decryptAndHash(ss: var SymmetricState, data: openArray[byte]): seq[byte] =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
# according to spec if key is empty leave plaintext
|
|
|
|
if ss.cs.hasKey:
|
|
|
|
result = ss.cs.decryptWithAd(ss.h.data, data)
|
|
|
|
else:
|
|
|
|
result = @data
|
|
|
|
ss.mixHash(data)
|
|
|
|
|
|
|
|
proc split(ss: var SymmetricState): tuple[cs1, cs2: CipherState] =
|
|
|
|
var
|
|
|
|
temp_keys: array[2, ChaChaPolyKey]
|
|
|
|
sha256.hkdf(ss.ck, [], [], temp_keys)
|
|
|
|
return (CipherState(k: temp_keys[0]), CipherState(k: temp_keys[1]))
|
|
|
|
|
|
|
|
proc init(_: type[HandshakeState]): HandshakeState =
|
|
|
|
result.ss = SymmetricState.init()
|
2020-04-05 02:43:05 +00:00
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
template write_e: untyped =
|
|
|
|
trace "noise write e"
|
|
|
|
# Sets e (which must be empty) to GENERATE_KEYPAIR(). Appends e.public_key to the buffer. Calls MixHash(e.public_key).
|
2020-07-07 11:14:11 +00:00
|
|
|
hs.e = genKeyPair(p.rng[])
|
2020-07-09 08:53:19 +00:00
|
|
|
msg.add hs.e.publicKey
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
hs.ss.mixHash(hs.e.publicKey)
|
|
|
|
|
|
|
|
template write_s: untyped =
|
|
|
|
trace "noise write s"
|
|
|
|
# Appends EncryptAndHash(s.public_key) to the buffer.
|
2020-07-09 08:53:19 +00:00
|
|
|
msg.add hs.ss.encryptAndHash(hs.s.publicKey)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
|
|
|
template dh_ee: untyped =
|
|
|
|
trace "noise dh ee"
|
|
|
|
# Calls MixKey(DH(e, re)).
|
|
|
|
hs.ss.mixKey(dh(hs.e.privateKey, hs.re))
|
|
|
|
|
|
|
|
template dh_es: untyped =
|
|
|
|
trace "noise dh es"
|
|
|
|
# Calls MixKey(DH(e, rs)) if initiator, MixKey(DH(s, re)) if responder.
|
|
|
|
when initiator:
|
|
|
|
hs.ss.mixKey(dh(hs.e.privateKey, hs.rs))
|
|
|
|
else:
|
|
|
|
hs.ss.mixKey(dh(hs.s.privateKey, hs.re))
|
|
|
|
|
|
|
|
template dh_se: untyped =
|
|
|
|
trace "noise dh se"
|
|
|
|
# Calls MixKey(DH(s, re)) if initiator, MixKey(DH(e, rs)) if responder.
|
|
|
|
when initiator:
|
|
|
|
hs.ss.mixKey(dh(hs.s.privateKey, hs.re))
|
|
|
|
else:
|
|
|
|
hs.ss.mixKey(dh(hs.e.privateKey, hs.rs))
|
|
|
|
|
|
|
|
# might be used for other token/handshakes
|
|
|
|
template dh_ss: untyped {.used.} =
|
|
|
|
trace "noise dh ss"
|
|
|
|
# Calls MixKey(DH(s, rs)).
|
|
|
|
hs.ss.mixKey(dh(hs.s.privateKey, hs.rs))
|
|
|
|
|
|
|
|
template read_e: untyped =
|
|
|
|
trace "noise read e", size = msg.len
|
|
|
|
|
|
|
|
if msg.len < Curve25519Key.len:
|
|
|
|
raise newException(NoiseHandshakeError, "Noise E, expected more data")
|
|
|
|
|
|
|
|
# Sets re (which must be empty) to the next DHLEN bytes from the message. Calls MixHash(re.public_key).
|
2020-07-09 08:53:19 +00:00
|
|
|
hs.re[0..Curve25519Key.high] = msg.toOpenArray(0, Curve25519Key.high)
|
|
|
|
msg.consume(Curve25519Key.len)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
hs.ss.mixHash(hs.re)
|
|
|
|
|
|
|
|
template read_s: untyped =
|
|
|
|
trace "noise read s", size = msg.len
|
|
|
|
# Sets temp to the next DHLEN + 16 bytes of the message if HasKey() == True, or to the next DHLEN bytes otherwise.
|
|
|
|
# Sets rs (which must be empty) to DecryptAndHash(temp).
|
|
|
|
let
|
2020-07-09 08:53:19 +00:00
|
|
|
rsLen =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
if hs.ss.cs.hasKey:
|
|
|
|
if msg.len < Curve25519Key.len + ChaChaPolyTag.len:
|
|
|
|
raise newException(NoiseHandshakeError, "Noise S, expected more data")
|
2020-07-09 08:53:19 +00:00
|
|
|
Curve25519Key.len + ChaChaPolyTag.len
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
else:
|
|
|
|
if msg.len < Curve25519Key.len:
|
|
|
|
raise newException(NoiseHandshakeError, "Noise S, expected more data")
|
2020-07-09 08:53:19 +00:00
|
|
|
Curve25519Key.len
|
|
|
|
hs.rs[0..Curve25519Key.high] =
|
|
|
|
hs.ss.decryptAndHash(msg.toOpenArray(0, rsLen - 1))
|
|
|
|
|
|
|
|
msg.consume(rsLen)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-09-16 09:55:25 +00:00
|
|
|
proc readFrame(sconn: Connection): Future[seq[byte]] {.async.} =
|
|
|
|
var besize {.noinit.}: array[2, byte]
|
|
|
|
await sconn.readExactly(addr besize[0], besize.len)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
let size = uint16.fromBytesBE(besize).int
|
2020-09-16 09:55:25 +00:00
|
|
|
trace "readFrame", sconn, size
|
2020-07-09 08:53:19 +00:00
|
|
|
if size == 0:
|
|
|
|
return
|
|
|
|
|
2020-09-16 09:55:25 +00:00
|
|
|
var buffer = newSeqUninitialized[byte](size)
|
|
|
|
await sconn.readExactly(addr buffer[0], buffer.len)
|
2020-04-22 14:36:59 +00:00
|
|
|
return buffer
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-09-16 09:55:25 +00:00
|
|
|
proc writeFrame(sconn: Connection, buf: openArray[byte]): Future[void] =
|
|
|
|
doAssert buf.len <= uint16.high.int
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
var
|
|
|
|
lesize = buf.len.uint16
|
|
|
|
besize = lesize.toBytesBE
|
2020-03-18 11:40:51 +00:00
|
|
|
outbuf = newSeqOfCap[byte](besize.len + buf.len)
|
2020-09-16 09:55:25 +00:00
|
|
|
trace "writeFrame", sconn, size = lesize, data = shortLog(buf)
|
2020-03-18 11:40:51 +00:00
|
|
|
outbuf &= besize
|
|
|
|
outbuf &= buf
|
2020-07-09 08:53:19 +00:00
|
|
|
sconn.write(outbuf)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-09-16 09:55:25 +00:00
|
|
|
proc receiveHSMessage(sconn: Connection): Future[seq[byte]] = readFrame(sconn)
|
|
|
|
proc sendHSMessage(sconn: Connection, buf: openArray[byte]): Future[void] =
|
|
|
|
writeFrame(sconn, buf)
|
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
proc handshakeXXOutbound(
|
|
|
|
p: Noise, conn: Connection,
|
|
|
|
p2pSecret: seq[byte]): Future[HandshakeResult] {.async.} =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
const initiator = true
|
|
|
|
var
|
|
|
|
hs = HandshakeState.init()
|
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
try:
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
hs.ss.mixHash(p.commonPrologue)
|
|
|
|
hs.s = p.noiseKeys
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# -> e
|
|
|
|
var msg: StreamSeq
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
write_e()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# IK might use this btw!
|
|
|
|
msg.add hs.ss.encryptAndHash([])
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
await conn.sendHSMessage(msg.data)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# <- e, ee, s, es
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
msg.assign(await conn.receiveHSMessage())
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
read_e()
|
|
|
|
dh_ee()
|
|
|
|
read_s()
|
|
|
|
dh_es()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
let remoteP2psecret = hs.ss.decryptAndHash(msg.data)
|
|
|
|
msg.clear()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# -> s, se
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
write_s()
|
|
|
|
dh_se()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# last payload must follow the encrypted way of sending
|
|
|
|
msg.add hs.ss.encryptAndHash(p2psecret)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
await conn.sendHSMessage(msg.data)
|
2020-04-05 02:43:05 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
let (cs1, cs2) = hs.ss.split()
|
|
|
|
return HandshakeResult(cs1: cs1, cs2: cs2, remoteP2psecret: remoteP2psecret, rs: hs.rs)
|
|
|
|
finally:
|
|
|
|
burnMem(hs)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
proc handshakeXXInbound(
|
|
|
|
p: Noise, conn: Connection,
|
|
|
|
p2pSecret: seq[byte]): Future[HandshakeResult] {.async.} =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
const initiator = false
|
|
|
|
|
|
|
|
var
|
|
|
|
hs = HandshakeState.init()
|
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
try:
|
|
|
|
hs.ss.mixHash(p.commonPrologue)
|
|
|
|
hs.s = p.noiseKeys
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# -> e
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
var msg: StreamSeq
|
|
|
|
msg.add(await conn.receiveHSMessage())
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
read_e()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# we might use this early data one day, keeping it here for clarity
|
|
|
|
let earlyData {.used.} = hs.ss.decryptAndHash(msg.data)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# <- e, ee, s, es
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
msg.consume(msg.len)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
write_e()
|
|
|
|
dh_ee()
|
|
|
|
write_s()
|
|
|
|
dh_es()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
msg.add hs.ss.encryptAndHash(p2psecret)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
await conn.sendHSMessage(msg.data)
|
|
|
|
msg.clear()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
# -> s, se
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
msg.add(await conn.receiveHSMessage())
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
read_s()
|
|
|
|
dh_se()
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
let
|
|
|
|
remoteP2psecret = hs.ss.decryptAndHash(msg.data)
|
|
|
|
(cs1, cs2) = hs.ss.split()
|
|
|
|
return HandshakeResult(cs1: cs1, cs2: cs2, remoteP2psecret: remoteP2psecret, rs: hs.rs)
|
|
|
|
finally:
|
|
|
|
burnMem(hs)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-05-07 20:37:46 +00:00
|
|
|
method readMessage*(sconn: NoiseConnection): Future[seq[byte]] {.async.} =
|
|
|
|
while true: # Discard 0-length payloads
|
2020-09-16 09:55:25 +00:00
|
|
|
let frame = await sconn.stream.readFrame()
|
|
|
|
sconn.activity = true
|
|
|
|
if frame.len > 0:
|
|
|
|
let res = sconn.readCs.decryptWithAd([], frame)
|
|
|
|
if res.len > 0:
|
|
|
|
when defined(libp2p_dump):
|
|
|
|
dumpMessage(sconn, FlowDirection.Incoming, res)
|
2020-09-15 09:16:43 +00:00
|
|
|
return res
|
2020-09-16 09:55:25 +00:00
|
|
|
|
|
|
|
when defined(libp2p_dump):
|
|
|
|
dumpMessage(sconn, FlowDirection.Incoming, [])
|
|
|
|
trace "Received 0-length message", sconn
|
2020-05-07 20:37:46 +00:00
|
|
|
|
|
|
|
method write*(sconn: NoiseConnection, message: seq[byte]): Future[void] {.async.} =
|
|
|
|
if message.len == 0:
|
|
|
|
return
|
|
|
|
|
2020-05-21 15:01:36 +00:00
|
|
|
var
|
|
|
|
left = message.len
|
|
|
|
offset = 0
|
|
|
|
while left > 0:
|
|
|
|
let
|
2020-09-16 09:55:25 +00:00
|
|
|
chunkSize = min(MaxPlainSize, left)
|
2020-07-09 08:53:19 +00:00
|
|
|
cipher = sconn.writeCs.encryptWithAd(
|
|
|
|
[], message.toOpenArray(offset, offset + chunkSize - 1))
|
2020-09-16 09:55:25 +00:00
|
|
|
|
|
|
|
await sconn.stream.writeFrame(cipher)
|
2020-09-15 09:16:43 +00:00
|
|
|
|
|
|
|
when defined(libp2p_dump):
|
2020-09-16 09:55:25 +00:00
|
|
|
dumpMessage(
|
|
|
|
sconn, FlowDirection.Outgoing,
|
|
|
|
message.toOpenArray(offset, offset + chunkSize - 1))
|
2020-09-15 09:16:43 +00:00
|
|
|
|
2020-09-16 09:55:25 +00:00
|
|
|
left = left - chunkSize
|
|
|
|
offset = offset + chunkSize
|
2020-08-15 05:36:15 +00:00
|
|
|
sconn.activity = true
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-06-20 10:56:55 +00:00
|
|
|
method handshake*(p: Noise, conn: Connection, initiator: bool): Future[SecureConn] {.async.} =
|
2020-09-06 08:31:47 +00:00
|
|
|
trace "Starting Noise handshake", conn, initiator
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-09-16 09:55:25 +00:00
|
|
|
let timeout = conn.timeout
|
|
|
|
conn.timeout = HandshakeTimeout
|
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
# https://github.com/libp2p/specs/tree/master/noise#libp2p-data-in-handshake-messages
|
|
|
|
let
|
2020-05-18 05:25:55 +00:00
|
|
|
signedPayload = p.localPrivateKey.sign(
|
2020-07-07 11:14:11 +00:00
|
|
|
PayloadString.toBytes & p.noiseKeys.publicKey.getBytes).tryGet()
|
2020-04-05 02:43:05 +00:00
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
var
|
|
|
|
libp2pProof = initProtoBuffer()
|
2020-07-13 12:43:07 +00:00
|
|
|
libp2pProof.write(1, p.localPublicKey)
|
|
|
|
libp2pProof.write(2, signedPayload.getBytes())
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
# data field also there but not used!
|
|
|
|
libp2pProof.finish()
|
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
var handshakeRes =
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
if initiator:
|
2020-07-09 08:53:19 +00:00
|
|
|
await handshakeXXOutbound(p, conn, libp2pProof.buffer)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
else:
|
2020-07-09 08:53:19 +00:00
|
|
|
await handshakeXXInbound(p, conn, libp2pProof.buffer)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
var secure = try:
|
|
|
|
var
|
|
|
|
remoteProof = initProtoBuffer(handshakeRes.remoteP2psecret)
|
|
|
|
remotePubKey: PublicKey
|
|
|
|
remotePubKeyBytes: seq[byte]
|
|
|
|
remoteSig: Signature
|
|
|
|
remoteSigBytes: seq[byte]
|
|
|
|
|
2020-07-15 08:25:39 +00:00
|
|
|
let r1 = remoteProof.getField(1, remotePubKeyBytes)
|
|
|
|
let r2 = remoteProof.getField(2, remoteSigBytes)
|
|
|
|
if r1.isErr() or not(r1.get()):
|
2020-08-06 07:29:27 +00:00
|
|
|
raise newException(NoiseHandshakeError, "Failed to deserialize remote public key bytes. (initiator: " & $initiator & ")")
|
2020-07-15 08:25:39 +00:00
|
|
|
if r2.isErr() or not(r2.get()):
|
2020-08-06 07:29:27 +00:00
|
|
|
raise newException(NoiseHandshakeError, "Failed to deserialize remote signature bytes. (initiator: " & $initiator & ")")
|
2020-07-09 08:53:19 +00:00
|
|
|
|
|
|
|
if not remotePubKey.init(remotePubKeyBytes):
|
2020-08-06 07:29:27 +00:00
|
|
|
raise newException(NoiseHandshakeError, "Failed to decode remote public key. (initiator: " & $initiator & ")")
|
2020-07-09 08:53:19 +00:00
|
|
|
if not remoteSig.init(remoteSigBytes):
|
2020-08-06 07:29:27 +00:00
|
|
|
raise newException(NoiseHandshakeError, "Failed to decode remote signature. (initiator: " & $initiator & ")")
|
2020-07-09 08:53:19 +00:00
|
|
|
|
|
|
|
let verifyPayload = PayloadString.toBytes & handshakeRes.rs.getBytes
|
|
|
|
if not remoteSig.verify(verifyPayload, remotePubKey):
|
|
|
|
raise newException(NoiseHandshakeError, "Noise handshake signature verify failed.")
|
|
|
|
else:
|
2020-09-06 08:31:47 +00:00
|
|
|
trace "Remote signature verified", conn
|
2020-07-09 08:53:19 +00:00
|
|
|
|
|
|
|
if initiator and not isNil(conn.peerInfo):
|
|
|
|
let pid = PeerID.init(remotePubKey)
|
|
|
|
if not conn.peerInfo.peerId.validate():
|
|
|
|
raise newException(NoiseHandshakeError, "Failed to validate peerId.")
|
|
|
|
if pid.isErr or pid.get() != conn.peerInfo.peerId:
|
|
|
|
var
|
|
|
|
failedKey: PublicKey
|
|
|
|
discard extractPublicKey(conn.peerInfo.peerId, failedKey)
|
2020-08-06 07:29:27 +00:00
|
|
|
debug "Noise handshake, peer infos don't match!",
|
2020-09-06 08:31:47 +00:00
|
|
|
initiator, dealt_peer = conn,
|
2020-08-06 07:29:27 +00:00
|
|
|
dealt_key = $failedKey, received_peer = $pid,
|
|
|
|
received_key = $remotePubKey
|
2020-07-09 08:53:19 +00:00
|
|
|
raise newException(NoiseHandshakeError, "Noise handshake, peer infos don't match! " & $pid & " != " & $conn.peerInfo.peerId)
|
|
|
|
|
2020-08-06 07:29:27 +00:00
|
|
|
let peerInfo =
|
|
|
|
if conn.peerInfo != nil: conn.peerInfo
|
|
|
|
else: PeerInfo.init(remotePubKey)
|
|
|
|
|
|
|
|
var tmp = NoiseConnection.init(conn, peerInfo, conn.observedAddr)
|
2020-07-09 08:53:19 +00:00
|
|
|
|
|
|
|
if initiator:
|
|
|
|
tmp.readCs = handshakeRes.cs2
|
|
|
|
tmp.writeCs = handshakeRes.cs1
|
|
|
|
else:
|
|
|
|
tmp.readCs = handshakeRes.cs1
|
|
|
|
tmp.writeCs = handshakeRes.cs2
|
|
|
|
tmp
|
|
|
|
finally:
|
|
|
|
burnMem(handshakeRes)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-08-06 07:29:27 +00:00
|
|
|
trace "Noise handshake completed!", initiator, peer = shortLog(secure.peerInfo)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
|
2020-09-16 09:55:25 +00:00
|
|
|
conn.timeout = timeout
|
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
return secure
|
2020-04-05 02:43:05 +00:00
|
|
|
|
2020-07-09 08:53:19 +00:00
|
|
|
method close*(s: NoiseConnection) {.async.} =
|
|
|
|
await procCall SecureConn(s).close()
|
|
|
|
|
|
|
|
burnMem(s.readCs)
|
|
|
|
burnMem(s.writeCs)
|
|
|
|
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
method init*(p: Noise) {.gcsafe.} =
|
|
|
|
procCall Secure(p).init()
|
|
|
|
p.codec = NoiseCodec
|
|
|
|
|
2020-07-07 11:14:11 +00:00
|
|
|
proc newNoise*(
|
|
|
|
rng: ref BrHmacDrbgContext, privateKey: PrivateKey;
|
|
|
|
outgoing: bool = true; commonPrologue: seq[byte] = @[]): Noise =
|
|
|
|
result = Noise(
|
|
|
|
rng: rng,
|
|
|
|
outgoing: outgoing,
|
|
|
|
localPrivateKey: privateKey,
|
2020-07-09 08:53:19 +00:00
|
|
|
localPublicKey: privateKey.getKey().tryGet().getBytes().tryGet(),
|
2020-07-07 11:14:11 +00:00
|
|
|
noiseKeys: genKeyPair(rng[]),
|
|
|
|
commonPrologue: commonPrologue,
|
|
|
|
)
|
Noise (#90)
* Start ChaCha20Poly1305 integration (BearSSL)
* Add Curve25519 (BearSSL) required operations for noise
* Fix curve mulgen iterate/derive
* Fix misleading header
* Add chachapoly proper test
* Curve25519 integration tests (failing, something is wrong)
* Add few converters, finish c25519 integration tests
* Remove implicit converters
* removed internal globals
* Start noise implementation
* Fix public() using proper bear mulgen
* Noise protocol WIP
* Noise progress
* Add a quick nim version of HKDF
* Converted hkdf to iterator, useful for noise
* Noise protocol implementation progress
* Noise progress
* XX handshake almost there
* noise progress
* Noise, testing handshake with test vectors
* Noise handshake progress, still wrong somewhere!
* Noise handshake success!
* Full verified noise XX handshake completed
* Fix and rewrite test to be similar to switch one
* Start with connection upgrade
* Switch chachapoly to CT implementations
* Improve HKDF implementation
* Use a type insted of tuple for HandshakeResult
* Remove unnecessary Let
* More cosmetic fixes
* Properly check randomBytes result
* Fix chachapoly signature
* Noise full circle (altho dispatcher is nil cursed)
* Allow nil aads in chachapoly routines
* Noise implementation up to running full test
* Use bearssl HKDF as well
* Directly use bearssl rng for curve25519 keys
* Add a (disabled/no CI) noise interop test server
* WIP on fixing interop issues
* More fixes in noise implementation for interop
* bump chronos requirement (nimble)
* Add a chachapoly test for very small size payloads
* Noise, more tracing
* Add 2 properly working noise tests
* Fix payload packing, following the spec properly (and not go version but
rather rust)
* Sanity, replace discard with asyncCheck
* Small fixes and optimization
* Use stew endian2 rather then system endian module
* Update nimble deps (chronos)
* Minor cosmetic/code sanity fixes
* Noise, handle Nonce max
* Noise tests, make sure to close secured conns
* More polish, improve code readability too
* More polish and testing again which test fails
* Further polishing
* Restore noise tests
* Remove useless Future[void]
* Remove useless CipherState initializer
* add a proper read wait future in second noise test
* Remove noise generic secure implementation for now
* Few fixes to run eth2 sim
* Add more debug info in noise traces
* Merge size + payload write in sendEncryptedMessage
* Revert secure interface, add outgoing property directly in newNoise
* remove sendEncrypted and receiveEncrypted
* Use openarray in chachapoly and curve25519 helpers
2020-03-17 12:30:01 +00:00
|
|
|
result.init()
|