rnd-rfc.vac.dev/vac/70/eth-secpm.md

42 KiB
Raw Blame History

title name status category editor contributors sidebar_position
70/ETH-SECPM Secure channel setup using Ethereum accounts raw Standards Track Ramses Fernandez <ramses@status.im> 1

Motivation

The need for secure communications has become paramount. Traditional centralized messaging protocols are susceptible to various security threats, including unauthorized access, data breaches, and single points of failure. Therefore a decentralized approach to secure communication becomes increasingly relevant, offering a robust solution to address these challenges.

This specification outlines a private messaging service using the Ethereum blockchain as authentication service. Rooted in the existing model, this proposal addresses the deficiencies related to forward privacy and authentication inherent in the current framework. The specification is divided into 3 sections:

  • Private 1-to-1 communications protocol, based on Signal's double ratchet.
  • Private group messaging protocol, based on the MLS protocol.
  • Description of an Ethereum-based authentication protocol, based on SIWE.

Private 1-to-1 communications protocol

Theory

The specification is based on the noise protocol framework. It corresponds to the double ratchet scheme combined with the X3DH algorithm, which will be used to initialize the former. We chose to express the protocol in noise to be be able to use the noise streamlined implementation and proving features. The X3DH algorithm provides both authentication and forward secrecy, as stated in the X3DH specification.

This protocol will consist of several stages:

  1. Key setting for X3DH: this step will produce prekey bundles for Bob which will be fed into X3DH. It will also allow Alice to generate the keys required to run the X3DH algorithm correctly.
  2. Execution of X3DH: This step will output a common secret key SK together with an additional data vector AD. Both will be used in the double ratchet algorithm initialization.
  3. Execution of the double ratchet algorithm for forward secure, authenticated communications, using the common secret key SK, obtained from X3DH, as a root key.

The protocol assumes the following requirements:

  • Alice knows Bobs Ethereum address.
  • Bob is willing to participate in the protocol, and publishes his public key.
  • Bobs ownership of his public key is verifiable,
  • Alice wants to send message M to Bob.
  • An eavesdropper cannot read Ms content even if she is storing it or relaying it.

Syntax

Cryptographic suite

The following cryptographic functions MUST be used:

  • X488 as Diffie-Hellman function DH.
  • SHA256 as KDF.
  • AES256-GCM as AEAD algorithm.
  • SHA512 as hash function.
  • XEd448 for digital signatures.

X3DH initialization

This scheme MUST work on the curve curve448. The X3DH algorithm corresponds to the IX pattern in Noise.

Bob and Alice MUST define personal key pairs (ik_B, IK_B) and (ik_A, IK_A) respectively where:

  • The key ik must be kept secret,
  • and the key IK is public.

Bob MUST generate new keys using (ik_B, IK_B) = GENERATE_KEYPAIR(curve = curve448).

Bob MUST also generate a public key pair (spk_B, SPK_B) = GENERATE_KEYPAIR(curve = curve448).

SPK is a public key generated and stored at medium-term. Both signed prekey and the certificate MUST undergo periodic replacement. After replacing the key, Bob keeps the old private key of SPK for some interval, dependant on the implementation. This allows Bob to decrypt delayed messages.

Bob MUST sign SPK for authentication: SigSPK = XEd448(ik, Encode(SPK))

A final step requires the definition of prekey_bundle = (IK, SPK, SigSPK, OPK_i)

One-time keys OPK MUST be generated as (opk_B, OPK_B) = GENERATE_KEYPAIR(curve = curve448).

Before sending an initial message to Bob, Alice MUST generate an AD: AD = Encode(IK_A) || Encode(IK_B).

Alice MUST generate ephemeral key pairs (ek, EK) = GENERATE_KEYPAIR(curve = curve448).

The function Encode() transforms an curve448 public key into a byte sequence. This is specified in the RFC 7748 on elliptic curves for security.

One MUST consider q = 2^446 - 13818066809895115352007386748515426880336692474882178609894547503885 for digital signatures with (XEd448_sign, XEd448_verify):

XEd448_sign((ik, IK), message):
    Z = randbytes(64)  
    r = SHA512(2^456 - 2 || ik || message || Z )
    R = (r * convert_mont(5)) % q
    h = SHA512(R || IK || M)
    s = (r + h * ik) % q
    return (R || s)
XEd448_verify(u, message, (R || s)):
    if (R.y \>= 2^448) or (s \>= 2^446): return FALSE
    h = (SHA512(R || 156326 || message)) % q
    R_check = s * convert_mont(5) - h * 156326
    if R == R_check: return TRUE
    return FALSE 
convert_mont(u):
    u_masked = u % mod 2^448
    inv = ((1 - u_masked)^(2^448 - 2^224 - 3)) % (2^448 - 2^224 - 1)
    P.y = ((1 + u_masked) * inv)) % (2^448 - 2^224 - 1)
    P.s = 0
    return P

Use of X3DH

This specification combines the double ratchet with X3DH using the following data as initialization for the former:

  • The SK output from X3DH becomes the SK input of the double ratchet. See section 3.3 of Signal Specification for a detailed description.
  • The AD output from X3DH becomes the AD input of the double ratchet. See sections 3.4 and 3.5 of Signal Specification for a detailed description.
  • Bobs signed prekey SigSPKB from X3DH is used as Bobs initial ratchet public key of the double ratchet.

X3DH has three phases:

  1. Bob publishes his identity key and prekeys to a server, a network, or dedicated smart contract.
  2. Alice fetches a prekey bundle from the server, and uses it to send an initial message to Bob.
  3. Bob receives and processes Alice's initial message.

Alice MUST perform the following computations:

dh1 = DH(IK_A, SPK_B, curve = curve448)
dh2 = DH(EK_A, IK_B, curve = curve448)
dh3 = DH(EK_A, SPK_B)
SK = KDF(dh1 || dh2 || dh3)

Alice MUST send to Bob a message containing:

  • IK_A, EK_A.
  • An identifier to Bob's prekeys used.
  • A message encrypted with AES256-GCM using AD and SK.

Upon reception of the initial message, Bob MUST:

  1. Perform the same computations above with the DH() function.
  2. Derive SK and construct AD.
  3. Decrypt the initial message encrypted with AES256-GCM.
  4. If decryption fails, abort the protocol.

Initialization of the double datchet

In this stage Bob and Alice have generated key pairs and agreed a shared secret SK using X3DH.

Alice calls RatchetInitAlice() defined below:

RatchetInitAlice(SK, IK_B):
    state.DHs = GENERATE_KEYPAIR(curve = curve448)
    state.DHr = IK_B
    state.RK, state.CKs = HKDF(SK, DH(state.DHs, state.DHr)) 
    state.CKr = None
    state.Ns, state.Nr, state.PN = 0
    state.MKSKIPPED = {}

The HKDF function MUST be the proposal by Krawczyk and Eronen. In this proposal chaining_key and input_key_material MUST be replaced with SK and the output of DH respectively.

Similarly, Bob calls the function RatchetInitBob() defined below:

RatchetInitBob(SK, (ik_B,IK_B)):
    state.DHs = (ik_B, IK_B)
    state.Dhr = None
    state.RK = SK
    state.CKs, state.CKr = None
    state.Ns, state.Nr, state.PN = 0
    state.MKSKIPPED = {}

Encryption

This function performs the symmetric key ratchet.

RatchetEncrypt(state, plaintext, AD):
    state.CKs, mk = HMAC-SHA256(state.CKs)
    header = HEADER(state.DHs, state.PN, state.Ns)
    state.Ns = state.Ns + 1
	return header, AES256-GCM_Enc(mk, plaintext, AD || header)

The HEADER function creates a new message header containing the public key from the key pair output of the DHfunction.
It outputs the previous chain length pn, and the message number n. The returned header object contains ratchet public key dh and integers pn and n.

Decryption

The function RatchetDecrypt() decrypts incoming messages:

RatchetDecrypt(state, header, ciphertext, AD):
    plaintext = TrySkippedMessageKeys(state, header, ciphertext, AD)
    if plaintext != None:
        return plaintext
    if header.dh != state.DHr:
        SkipMessageKeys(state, header.pn)
        DHRatchet(state, header)
    SkipMessageKeys(state, header.n)
    state.CKr, mk = HMAC-SHA256(state.CKr)
    state.Nr = state.Nr + 1
    return AES256-GCM_Dec(mk, ciphertext, AD || header)

Auxiliary functions follow:

DHRatchet(state, header):
    state.PN = state.Ns
    state.Ns = state.Nr = 0
    state.DHr = header.dh
    state.RK, state.CKr = HKDF(state.RK, DH(state.DHs, state.DHr))
    state.DHs = GENERATE_KEYPAIR(curve = curve448)
    state.RK, state.CKs = HKDF(state.RK, DH(state.DHs, state.DHr))
SkipMessageKeys(state, until):
    if state.NR + MAX_SKIP \< until:
        raise Error
    if state.CKr != none:
        while state.Nr \< until:
            state.CKr, mk = HMAC-SHA256(state.CKr)
            state.MKSKIPPED[state.DHr, state.Nr] = mk
            state.Nr = state.Nr + 1
TrySkippedMessageKey(state, header, ciphertext, AD):
    if (header.dh, header.n) in state.MKSKIPPED:
        mk = state.MKSKIPPED[header.dh, header.n]
        delete state.MKSKIPPED[header.dh, header.n]
        return AES256-GCM_Dec(mk, ciphertext, AD || header)
    else: return None

Information retrieval

Static data

Some data, such as the key pairs (ik, IK) for Alice and Bob, MAY NOT be regenerated after a period of time. Therefore the prekey bundle MAY be stored in long-term storage solutions, such as a dedicated smart contract which outputs such a key pair when receiving an Ethereum wallet address.

Storing static data is done using a dedicated smart contract PublicKeyStorage which associates the Ethereum wallet address of a user with his public key. This mapping is done by PublicKeyStorage using a publicKeys function, or a setPublicKey function. This mapping is done if the user passed an authorization process. A user who wants to retrieve a public key associated with a specific wallet address calls a function getPublicKey. The user provides the wallet address as the only input parameter for getPublicKey. The function outputs the associated public key from the smart contract.

Ephemeral data

Storing ephemeral data on Ethereum MAY be done using a combination of on-chain and off-chain solutions. This approach provides an efficient solution to the problem of storing updatable data in Ethereum.

  1. Ethereum stores a reference or a hash that points to the off-chain data.
  2. Off-chain solutions can include systems like IPFS, traditional cloud storage solutions, or decentralized storage networks such as a Swarm. In any case, the user stores the associated IPFS hash, URL or reference in Ethereum.

The fact of a user not updating the ephemeral information can be understood as Bob not willing to participate in any communication.

This applies to KeyPackage, which in the MLS specification are meant to be stored in a directory provided by the delivery service. If such an element does not exist, KeyPackage MUST be stored according to one of the two options outlined above.

Private group messaging protocol

Theory

The Messaging Layer Security(MLS) protocol aims at providing a group of users with end-to-end encryption in an authenticated and asynchronous way. The main security characteristics of the protocol are: Message confidentiality and authentication, sender authentication, membership agreement, post-remove and post-update security, and forward secrecy and post-compromise security. The MLS protocol achieves: low-complexity, group integrity, synchronization and extensibility.

The extension to group chat described in forthcoming sections is built upon the MLS protocol.

Syntax

Each MLS session uses a single cipher suite that specifies the primitives to be used in group key computations. The cipher suite MUST use:

  • X488 as Diffie-Hellman function.
  • SHA256 as KDF.
  • AES256-GCM as AEAD algorithm.
  • SHA512 as hash function.
  • XEd448 for digital signatures.

Formats for public keys, signatures and public-key encryption MUST follow Section 5.1 of RFC9420.

Hash-based identifiers

Some MLS messages refer to other MLS objects by hash. These identifiers MUST be computed according to Section 5.2 of RFC9420.

Credentials

Each member of a group presents a credential that provides one or more identities for the member and associates them with the member's signing key. The identities and signing key are verified by the Authentication Service in use for a group.

Credentials MUST follow the specifications of section 5.3 of RFC9420.

Message framing

Handshake and application messages use a common framing structure providing encryption to ensure confidentiality within the group, and signing to authenticate the sender.

The structure is:

  • PublicMessage: represents a message that is only signed, and not encrypted. The definition and the encoding/decoding of a PublicMessage MUST follow the specification in section 6.2 of RFC9420.
  • PrivateMessage: represents a signed and encrypted message, with protections for both the content of the message and related metadata. The definition, and the encoding/decoding of a PrivateMessage MUST follow the specification in section 6.3 of RFC9420.

Applications MUST use PrivateMessage to encrypt application messages.

Applications SHOULD use PrivateMessage to encode handshake messages.

Each encrypted MLS message carries a "generation" number which is a per-sender incrementing counter. If a group member observes a gap in the generation sequence for a sender, then they know that they have missed a message from that sender.

Nodes contents

The nodes of a ratchet tree contain several types of data:

  • Leaf nodes describe individual members.
  • Parent nodes describe subgroups.

Contents of each kind of node, and its structure MUST follow the indications described in sections 7.1 and 7.2 of RFC9420.

Leaf node validation

KeyPackage objects describe the client's capabilities and provides keys that can be used to add the client to a group.

The validity of a leaf node needs to be verified at the following stages:

  • When a leaf node is downloaded in a KeyPackage, before it is used to add the client to the group.
  • When a leaf node is received by a group member in an Add, Update, or Commit message.
  • When a client validates a ratchet tree.

A client MUST verify the validity of a leaf node following the instructions of section 7.3 in RFC9420.

Ratchet tree evolution

Whenever a member initiates an epoch change, they MAY need to refresh the key pairs of their leaf and of the nodes on their direct path. This is done to keep forward secrecy and post-compromise security. The member initiating the epoch change MUST follow this procedure procedure. A member updates the nodes along its direct path as follows:

  • Blank all the nodes on the direct path from the leaf to the root.
  • Generate a fresh HPKE key pair for the leaf.
  • Generate a sequence of path secrets, one for each node on the leaf's filtered direct path. It MUST follow the procedure described in section 7.4 of RFC9420.
  • Compute the sequence of HPKE key pairs (node_priv,node_pub), one for each node on the leaf's direct path. It MUST follow the procedure described in section 7.4 of RFC9420.

Views of the tree synchronization

After generating fresh key material and applying it to update their local tree state, the generator broadcasts this update to other members of the group. This operation MUST be done according to section 7.5 of RFC9420.

Leaf synchronization

Changes to group memberships MUST be represented by adding and removing leaves of the tree. This corresponds to increasing or decreasing the depth of the tree, resulting in the number of leaves being doubled or halved. These operations MUST be done as described in section 7.7 of RFC9420.

Tree and parent hashing

Group members can agree on the cryptographic state of the group by generating a hash value that represents the contents of the group ratchet tree and the members credentials. The hash of the tree is the hash of its root node, defined recursively from the leaves. Tree hashes summarize the state of a tree at point in time. The hash of a leaf is the hash of the LeafNodeHashInput object. At the same time, the hash of a parent node including the root, is the hash of a ParentNodeHashInput object. Parent hashes capture information about how keys in the tree were populated.

Tree and parent hashing MUST follow the directions in Sections 7.8 and 7.9 of RFC9420.

Key schedule

Group keys are derived using the Extract and Expand functions from the KDF for the group's cipher suite, as well as the functions defined below:

ExpandWithLabel(Secret, Label, Context, Length) = KDF.Expand(Secret, KDFLabel, Length)
DeriveSecret(Secret, Label) = ExpandWithLabel(Secret, Label, "", KDF.Nh)

KDFLabel MUST be specified as:

struct {
    uint16 length;
    opaque label\<V\>;
    opaque context\<V\>;
} KDFLabel;

The fields of KDFLabel MUST be:

length = Length;
label = "MLS 1.0 " + Label;
context = Context;

Each member of the group MUST maintaint a GroupContext object summarizing the state of the group. The sturcture of such object MUST be:

struct {
ProtocolVersion version = mls10;
CipherSuite cipher_suite;
opaque group_id\<V\>;
uint64 epoch;
opaque tree_hash\<V\>;
opaque confirmed_trasncript_hash\<V\>;
Extension extension\<V\>;
} GroupContext;

The use of key scheduling MUST follow the indications in sections 8.1 - 8.7 in RFC9420.

Secret trees

For the generation of encryption keys and nonces, the key schedule begins with the encryption_secret at the root and derives a tree of secrets with the same structure as the group's ratchet tree. Each leaf in the secret tree is associated with the same group member as the corresponding leaf in the ratchet tree.

If N is a parent node in the secret tree, the secrets of the children of N MUST be defined following section 9 of RFC9420.

Encryption keys

MLS encrypts three different types of information:

  • Metadata (sender information).
  • Handshake messages (Proposal and Commit).
  • Application messages.

For handshake and application messages, a sequence of keys is derived via a sender ratchet. Each sender has their own sender ratchet, and each step along the ratchet is called a generation. These procedures MUST follow section 9.1 of RFC9420.

Deletion schedule

All security-sensitive values MUST be deleted as soon as they are consumed. A sensitive value S is consumed if:

  • S was used to encrypt or (successfully) decrypt a message.
  • A key, nonce, or secret derived from S has been consumed.

The deletion procedure MUST follow the instruction described in section 9.2 of RFC9420.

Key packages

KeyPackage objects are used to ease the addition of clients to a group asynchronously. A KeyPackage object specifies:

  • Protocol version and cipher suite supported by the client.
  • Public keys that can be used to encrypt Welcome messages. Welcome messages provide new members with the information to initialize their state for the epoch in which they were added or in which they want to add themselves to the group
  • The content of the leaf node that should be added to the tree to represent this client.

KeyPackages are intended to be used only once and SHOULD NOT be reused.

Clients MAY generate and publish multiple KeyPackages to support multiple cipher suites.

The structure of the object MUST be:

struct {
ProtocolVersion version;
CipherSuite cipher_suite;
HPKEPublicKey init_key;
LeafNode leaf_node;
Extension extensions\<V\>;
/* SignWithLabel(., "KeyPackageTBS", KeyPackageTBS) */
opaque signature\<V\>;
}
struct {
ProtocolVersion version;
CipheSuite cipher_suite;
HPKEPublicKey init_key;
LeafNode leaf_node;
Extension extensions\<V\>;
}

KeyPackage object MUST be verified when:

  • A KeyPackage is downloaded by a group member, before it is used to add the client to the group.
  • When a KeyPackage is received by a group member in an Add message.

Verification MUST be done as follows:

  • Verify that the cipher suite and protocol version of the KeyPackage match those in the GroupContext.
  • Verify that the leaf_node of the KeyPackage is valid for a KeyPackage.
  • Verify that the signature on the KeyPackage is valid.
  • Verify that the value of leaf_node.encryption_key is different from the value of the init_key field.

HPKE public keys are opaque values in a format defined by Section 4 of RFC9180.

Signature public keys are represented as opaque values in a format defined by the cipher suite's signature scheme.

Group creation

A group is always created with a single member. Other members are then added to the group using the usual Add/Commit mechanism. The creator of a group MUST set:

  • the group ID.
  • cipher suite.
  • initial extensions for the group.

If the creator intends to add other members at the time of creation, then it SHOULD fetch KeyPackages for those members, and select a cipher suite and extensions according to their capabilities.

The creator MUST use the capabilities information in these KeyPackages to verify that the chosen version and cipher suite is the best option supported by all members.

Group IDs SHOULD be constructed so they are unique with high probability.

To initialize a group, the creator of the group MUST initialize a one-member group with the following initial values:

  • Ratchet tree: A tree with a single node, a leaf node containing an HPKE public key and credential for the creator.
  • Group ID: A value set by the creator.
  • Epoch: 0.
  • Tree hash: The root hash of the above ratchet tree.
  • Confirmed transcript hash: The zero-length octet string.
  • Epoch secret: A fresh random value of size KDF.Nh.
  • Extensions: Any values of the creator's choosing.

The creator MUST also calculate the interim transcript hash:

  • Derive the confirmation_key for the epoch according to Section 8 of RFC9420.
  • Compute a confirmation_tag over the empty confirmed_transcript_hash using the confirmation_key as described in Section 8.1 of RFC9420.
  • Compute the updated interim_transcript_hash from the confirmed_transcript_hash and the confirmation_tag as described in Section 8.2 RFC9420.

All members of a group MUST support the cipher suite and protocol version in use. Additional requirements MAY be imposed by including a required_capabilities extension in the GroupContext.

struct {
ExtensionType extension_types\<V\>;
ProposalType proposal_types\<V\>;
CredentialType credential_types\<V\>;
}

Group evolution

Group membership can change, and existing members can change their keys in order to achieve post-compromise security. In MLS, each such change is accomplished by a two-step process:

  • A proposal to make the change is broadcast to the group in a Proposal message.
  • A member of the group or a new member broadcasts a Commit message that causes one or more proposed changes to enter into effect.

The group evolves from one cryptographic state to another each time a Commit message is sent and processed. These states are called epochs and are uniquely identified among states of the group by eight-octet epoch values.

Proposals are included in a FramedContent by way of a Proposal structure that indicates their type:

struct {
ProposalType proposal_type;
select (Proposal.proposal_type) {
case add:			Add:
case update:			Update;
case remove:			Remove;
case psk:			PreSharedKey;
case reinit:			ReInit;
case external_init:		ExternalInit;
case group_context_extensions:	GroupContextExtensions;
}

On receiving a FramedContent containing a Proposal, a client MUST verify the signature inside FramedContentAuthData and that the epoch field of the enclosing FramedContent is equal to the epoch field of the current GroupContext object. If the verification is successful, then the Proposal SHOULD be cached in such a way that it can be retrieved by hash in a later Commit message.

Proposals are organized as follows:

  • Add: requests that a client with a specified KeyPackage be added to the group.
  • Update: similar to Add, it replaces the sender's LeafNode in the tree instead of adding a new leaf to the tree.
  • Remove: requests that the member with the leaf index removed be removed from the group.
  • ReInit: requests to reinitialize the group with different parameters.
  • ExternalInit: used by new members that want to join a group by using an external commit.
  • GroupContentExtensions: it is used to update the list of extensions in the GroupContext for the group.

Proposals structure and semantics MUST follow sections 12.1.1 - 12.1.7 of RFC9420.

Any list of commited proposals MUST be validated either by a the group member who created the commit, or any group member processing such commit. The validation MUST be done according to one of the procedures described in Section 12.2 of RFC9420.

When creating or processing a Commit, a client applies a list of proposals to the ratchet tree and GroupContext. The client MUST apply the proposals in the list in the order described in Section 12.3 of RFC9420.

Commit messages

Commit messages initiate new group epochs. It informs group members to update their representation of the state of the group by applying the proposals and advancing the key schedule.

Each proposal covered by the Commit is included by a ProposalOrRef value. ProposalOrRef identify the proposal to be applied by value or by reference. Commits that refer to new Proposals from the committer can be included by value. Commits for previously sent proposals from anyone can be sent by reference. Proposals sent by reference are specified by including the hash of the AuthenticatedContent.

Group members that have observed one or more valid proposals within an epoch MUST send a Commit message before sending application data. A sender and a receiver of a Commit MUST verify that the committed list of proposals is valid. The sender of a Commit SHOULD include all valid proposals received during the current epoch.

Functioning of commits MUST follow the instructions of Section 12.4 of RFC9420.

Application messages

Handshake messages provide an authenticated group key exchange to clients. To protect application messages sent among the members of a group, the encryption_secret provided by the key schedule is used to derive a sequence of nonces and keys for message encryption.

Each client MUST maintain their local copy of the key schedule for each epoch during which they are a group member. They derive new keys, nonces, and secrets as needed. This data MUST be deleted as soon as they have been used.

Group members MUST use the AEAD algorithm associated with the negotiated MLS ciphersuite to encrypt and decrypt Application messages according to the Message Framing section. The group identifier and epoch allow a device to know which group secrets should be used and from which Epoch secret to start computing other secrets and keys. Application messages SHOULD be padded to provide resistance against traffic analysis techniques. This avoids additional information to be provided to an attacker in order to guess the length of the encrypted message. Padding SHOULD be used on messages with zero-valued bytes before AEAD encryption.

Functioning of application messages MUST follow the instructions of Section 15 of RFC9420.

Considerations with respect to decentralization

The MLS protocol assumes the existence on a (central, untrusted) delivery service, whose responsabilites include:

  • Acting as a directory service providing the initial keying material for clients to use.
  • Routing MLS messages among clients.

The central delivery service can be avoided in protocols using the publish/gossip approach, such as gossipsub.

Concerning keys, each node can generate and disseminate their encryption key among the other nodes, so they can create a local version of the tree that allows for the generation of the group key.

Another important component is the authentication service, which is replaced with SIWE in this specification.

Ethereum-based authentication protocol

Theory

Sign-in with Ethereum describes how Ethereum accounts authenticate with off-chain services by signing a standard message format parameterized by scope, session details, and security mechanisms. Sign-in with Ethereum (SIWE), which is described in the EIP 4361, MUST be the authentication method required.

Syntax

Message format (ABNF)

A SIWE Message MUST conform with the following Augmented BackusNaur Form (RFC 5234) expression.

sign-in-with-ethereum =
    [ scheme "://" ] domain %s" wants you to sign in with your Ethereum account:" LF
    address LF
    LF
    [ statement LF ]
    LF
    %s"URI: " uri LF
    %s"Version: " version LF
    %s"Chain ID: " chain-id LF
    %s"Nonce: " nonce LF
    %s"Issued At: " issued-at
    [ LF %s"Expiration Time: " expiration-time ]
    [ LF %s"Not Before: " not-before ]
    [ LF %s"Request ID: " request-id ]
    [ LF %s"Resources:"
    resources ]

scheme = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
    ; See RFC 3986 for the fully contextualized
    ; definition of "scheme".

domain = authority
    ; From RFC 3986:
    ;     authority     = [ userinfo "@" ] host [ ":" port ]
    ; See RFC 3986 for the fully contextualized
    ; definition of "authority".

address = "0x" 40*40HEXDIG
    ; Must also conform to captilization
    ; checksum encoding specified in EIP-55
    ; where applicable (EOAs).

statement = *( reserved / unreserved / " " )
    ; See RFC 3986 for the definition
    ; of "reserved" and "unreserved".
    ; The purpose is to exclude LF (line break).

uri = URI
    ; See RFC 3986 for the definition of "URI".

version = "1"

chain-id = 1*DIGIT
    ; See EIP-155 for valid CHAIN_IDs.

nonce = 8*( ALPHA / DIGIT )
    ; See RFC 5234 for the definition
    ; of "ALPHA" and "DIGIT".

issued-at = date-time
expiration-time = date-time
not-before = date-time
    ; See RFC 3339 (ISO 8601) for the
    ; definition of "date-time".

request-id = *pchar
    ; See RFC 3986 for the definition of "pchar".

resources = *( LF resource )

resource = "- " URI

This specification defines the following SIWE Message fields that can be parsed from a SIWE Message by following the rules in ABNF Message Format:

  • scheme OPTIONAL. The URI scheme of the origin of the request. Its value MUST be a RFC 3986 URI scheme.

  • domain REQUIRED. The domain that is requesting the signing. Its value MUST be a RFC 3986 authority. The authority includes an OPTIONAL port. If the port is not specified, the default port for the provided scheme is assumed.

If scheme is not specified, HTTPS is assumed by default.

  • address REQUIRED. The Ethereum address performing the signing. Its value SHOULD be conformant to mixed-case checksum address encoding specified in ERC-55 where applicable.

  • statement OPTIONAL. A human-readable ASCII assertion that the user will sign which MUST NOT include '\n' (the byte 0x0a).

  • uri REQUIRED. An RFC 3986 URI referring to the resource that is the subject of the signing.

  • version REQUIRED. The current version of the SIWE Message, which MUST be 1 for this specification.

  • chain-id REQUIRED. The EIP-155 Chain ID to which the session is bound, and the network where Contract Accounts MUST be resolved.

  • nonce REQUIRED. A random string (minimum 8 alphanumeric characters) chosen by the relying party and used to prevent replay attacks.

  • issued-at REQUIRED. The time when the message was generated, typically the current time. Its value MUST be an ISO 8601 datetime string.

  • expiration-time OPTIONAL. The time when the signed authentication message is no longer valid. Its value MUST be an ISO 8601 datetime string.

  • not-before OPTIONAL. The time when the signed authentication message will become valid. Its value MUST be an ISO 8601 datetime string.

  • request-id OPTIONAL. An system-specific identifier that MAY be used to uniquely refer to the sign-in request.

  • resources OPTIONAL. A list of information or references to information the user wishes to have resolved as part of authentication by the relying party. Every resource MUST be a RFC 3986 URI separated by "\n- " where \n is the byte 0x0a.

Signing and Verifying Messages with Ethereum Accounts

  • For Externally Owned Accounts, the verification method specified in ERC-191 MUST be used.

  • For Contract Accounts,

    • The verification method specified in ERC-1271 SHOULD be used. Otherwise, the implementer MUST clearly define the verification method to attain security and interoperability for both wallets and relying parties.

    • When performing ERC-1271 signature verification, the contract performing the verification MUST be resolved from the specified chain-id.

    • Implementers SHOULD take into consideration that ERC-1271 implementations are not required to be pure functions. They can return different results for the same inputs depending on blockchain state. This can affect the security model and session validation rules.

Resolving Ethereum Name Service (ENS) Data

  • The relying party or wallet MAY additionally perform resolution of ENS data, as this can improve the user experience by displaying human-friendly information that is related to the address. Resolvable ENS data include:

    • The primary ENS name.
    • The ENS avatar.
    • Any other resolvable resources specified in the ENS documentation.
  • If resolution of ENS data is performed, implementers SHOULD take precautions to preserve user privacy and consent. Their address could be forwarded to third party services as part of the resolution process.

Implementer steps: specifying the request origin

The domain and, if present, the scheme, in the SIWE Message MUST correspond to the origin from where the signing request was made.

Implementer steps: verifying a signed message

The SIWE Message MUST be checked for conformance to the ABNF Message Format and its signature MUST be checked as defined in Signing and Verifying Messages with Ethereum Accounts.

Implementer steps: creating sessions

Sessions MUST be bound to the address and not to further resolved resources that can change.

Implementer steps: interpreting and resolving resources

Implementers SHOULD ensure that that URIs in the listed resources are human-friendly when expressed in plaintext form.

Wallet implementer steps: verifying the message format

The full SIWE message MUST be checked for conformance to the ABNF defined in ABNF Message Format.

Wallet implementers SHOULD warn users if the substring "wants you to sign in with your Ethereum account" appears anywhere in an ERC-191 message signing request unless the message fully conforms to the format defined ABNF Message Format.

Wallet implementer steps: verifying the request origin

Wallet implementers MUST prevent phishing attacks by verifying the origin of the request against the scheme and domain fields in the SIWE Message.

The origin SHOULD be read from a trusted data source such as the browser window or over WalletConnect ERC-1328 sessions for comparison against the signing message contents.

Wallet implementers MAY warn instead of rejecting the verification if the origin is pointing to localhost.

The following is a RECOMMENDED algorithm for Wallets to conform with the requirements on request origin verification defined by this specification.

The algorithm takes the following input variables:

  • fields from the SIWE message.
  • origin of the signing request: the origin of the page which requested the signin via the provider.
  • allowedSchemes: a list of schemes allowed by the Wallet.
  • defaultScheme: a scheme to assume when none was provided. Wallet implementers in the browser SHOULD use https.
  • developer mode indication: a setting deciding if certain risks should be a warning instead of rejection. Can be manually configured or derived from origin being localhost.

The algorithm is described as follows:

  • If scheme was not provided, then assign defaultScheme as scheme.
  • If scheme is not contained in allowedSchemes, then the scheme is not expected and the Wallet MUST reject the request. Wallet implementers in the browser SHOULD limit the list of allowedSchemes to just 'https' unless a developer mode is activated.
  • If scheme does not match the scheme of origin, the Wallet SHOULD reject the request. Wallet implementers MAY show a warning instead of rejecting the request if a developer mode is activated. In that case the Wallet continues processing the request.
  • If the host part of the domain and origin do not match, the Wallet MUST reject the request unless the Wallet is in developer mode. In developer mode the Wallet MAY show a warning instead and continues procesing the request.
  • If domain and origin have mismatching subdomains, the Wallet SHOULD reject the request unless the Wallet is in developer mode. In developer mode the Wallet MAY show a warning instead and continues procesing the request.
  • Let port be the port component of domain, and if no port is contained in domain, assign port the default port specified for the scheme.
  • If port is not empty, then the Wallet SHOULD show a warning if the port does not match the port of origin.
  • If port is empty, then the Wallet MAY show a warning if origin contains a specific port.
  • Return request origin verification completed.

Wallet implementer steps: creating SIWE interfaces

Wallet implementers MUST display to the user the following fields from the SIWE Message request by default and prior to signing, if they are present: scheme, domain, address, statement, and resources. Other present fields MUST also be made available to the user prior to signing either by default or through an extended interface.

Wallet implementers displaying a plaintext SIWE Message to the user SHOULD require the user to scroll to the bottom of the text area prior to signing.

Wallet implementers MAY construct a custom SIWE user interface by parsing the ABNF terms into data elements for use in the interface. The display rules above still apply to custom interfaces.

Wallet implementer steps: supporting internationalization (i18n)

After successfully parsing the message into ABNF terms, translation MAY happen at the UX level per human language.

Privacy and Security Considerations

  • The double ratchet "recommends" using AES in CBC mode. Since encryption must be with an AEAD encryption scheme, we will use AES in GCM mode instead (supported by Noise).
  • For the information retrieval, the algorithm MUST include a access control mechanisms to restrict who can call the set and get functions.
  • One SHOULD include event logs to track changes in public keys.
  • The curve vurve448 MUST be chosen due to its higher security level: 224-bit security instead of the 128-bit security provided by X25519.
  • It is important that Bob MUST NOT reuse SPK.

Copyright and related rights waived via CC0.

References