af168797a0
|
||
|---|---|---|
| .. | ||
| common | ||
| discovery | ||
| factory | ||
| incentivization | ||
| node | ||
| utils | ||
| waku_api | ||
| waku_archive | ||
| waku_archive_legacy | ||
| waku_core | ||
| waku_enr | ||
| waku_filter_v2 | ||
| waku_keystore | ||
| waku_lightpush | ||
| waku_metadata | ||
| waku_noise | ||
| waku_peer_exchange | ||
| waku_relay | ||
| waku_rendezvous | ||
| waku_rln_relay | ||
| waku_store | ||
| waku_store_legacy | ||
| waku_sync | ||
| README.md | ||
| waku_api.nim | ||
| waku_archive.nim | ||
| waku_archive_legacy.nim | ||
| waku_core.nim | ||
| waku_enr.nim | ||
| waku_filter_v2.nim | ||
| waku_keystore.nim | ||
| waku_lightpush.nim | ||
| waku_metadata.nim | ||
| waku_node.nim | ||
| waku_peer_exchange.nim | ||
| waku_relay.nim | ||
| waku_rendezvous.nim | ||
| waku_rln_relay.nim | ||
| waku_store.nim | ||
| waku_store_legacy.nim | ||
README.md
Waku
This folder contains code related to Waku, both as a node and as a protocol.
Introduction
This is an implementation in Nim of the Waku suite of protocols.
See specifications.
How to Build & Run
Prerequisites
- GNU Make, Bash and the usual POSIX utilities. Git 2.9.4 or newer.
Wakunode binary
# The first `make` invocation will update all Git submodules.
# You'll run `make update` after each `git pull`, in the future, to keep those submodules up to date.
make wakunode2
# See available command line options
./build/wakunode2 --help
# Connect the client directly with the Status test fleet
# TODO NYI
#./build/wakunode2 --log-level:debug --discovery:off --fleet:test --log-metrics
Note: building wakunode2 requires 2GB of RAM. The build will fail on systems not fulfilling this requirement.
Setting up a wakunode2 on the smallest digital ocean droplet, you can either
- compile on a stronger droplet featuring the same CPU architecture and downgrade after compiling, or
- activate swap on the smallest droplet, or
- use Docker.
Waku Protocol Test Suite
# Run all the Waku tests
make test
To run a specific test.
# Get a shell with the right environment variables set
./env.sh bash
# Run a specific test
nim c -r ./tests/test_waku_filter_legacy.nim
You can also alter compile options. For example, if you want a less verbose output you can do the following. For more, refer to the compiler flags and chronicles documentation.
nim c -r -d:chronicles_log_level=WARN --verbosity=0 --hints=off ./tests/waku_filter_v2/test_waku_filter.nim
You may also want to change the outdir to a folder ignored by git.
nim c -r -d:chronicles_log_level=WARN --verbosity=0 --hints=off --outdir=build ./tests/waku_filter_v2/test_waku_filter.nim
Waku Protocol Example
There are basic examples of both publishing and subscribing,
more limited in features and configuration than the wakunode2 binary,
located in examples/.
There is also a more full featured example in apps/chat2/.
Using Metrics
Metrics are available for Waku nodes.
make wakunode2
./build/wakunode2 --metrics-server
Ensure your Prometheus config prometheus.yml contains the targets you care about, e.g.:
scrape_configs:
- job_name: "waku"
static_configs:
- targets: ['localhost:8008', 'localhost:8009', 'localhost:8010']
For visualisation, similar steps can be used as is written down for Nimbus here.
There is a similar example dashboard that includes visualisation of the
envelopes available at metrics/waku-grafana-dashboard.json.
Spec support
All Waku RFCs reside at rfc.vac.dev.
Note that Waku specs are titled WAKU2-XXX
to differentiate them from a previous legacy version of Waku with RFC titles in the format WAKU-XXX.
The legacy Waku protocols are stable, but not under active development.
Generating and configuring a private key
By default a node will generate a new, random key pair each time it boots,
resulting in a different public libp2p multiaddrs after each restart.
To maintain consistent addressing across restarts,
it is possible to configure the node with a previously generated private key using the --nodekey option.
wakunode2 --nodekey=<64_char_hex>
This option takes a Secp256k1 private key in 64 char hexstring format.
To generate such a key on Linux systems,
use the openssl rand command to generate a pseudo-random 32 byte hexstring.
openssl rand -hex 32
Example output:
$ openssl rand -hex 32
6a29e767c96a2a380bb66b9a6ffcd6eb54049e14d796a1d866307b8beb7aee58
where the key 6a29e767c96a2a380bb66b9a6ffcd6eb54049e14d796a1d866307b8beb7aee58 can be used as nodekey.
To create a reusable keyfile on Linux using openssl,
use the ecparam command coupled with some standard utilities
whenever you want to extract the 32 byte private key in hex format.
# Generate keyfile
openssl ecparam -genkey -name secp256k1 -out my_private_key.pem
# Extract 32 byte private key
openssl ec -in my_private_key.pem -outform DER | tail -c +8 | head -c 32| xxd -p -c 32
Example output:
read EC key
writing EC key
0c687bb8a7984c770b566eae08520c67f53d302f24b8d4e5e47cc479a1e1ce23
where the key 0c687bb8a7984c770b566eae08520c67f53d302f24b8d4e5e47cc479a1e1ce23 can be used as nodekey.
wakunode2 --nodekey=0c687bb8a7984c770b566eae08520c67f53d302f24b8d4e5e47cc479a1e1ce23
Configuring a domain name
It is possible to configure an IPv4 DNS domain name that resolves to the node's public IPv4 address.
wakunode2 --dns4-domain-name=mynode.example.com
This allows for the node's publicly announced multiaddrs to use the /dns4 scheme.
In addition, nodes with domain name and secure websocket configured,
will generate a discoverable ENR containing the /wss multiaddr with /dns4 domain name.
This is necessary to verify domain certificates when connecting to this node over secure websocket.
Using DNS discovery to connect to existing nodes
A node can discover other nodes to connect to using DNS-based discovery. The following command line options are available:
--dns-discovery Enable DNS Discovery
--dns-discovery-url URL for DNS node list in format 'enrtree://<key>@<fqdn>'
--dns-discovery-name-server DNS name server IPs to query. Argument may be repeated.
--dns-discoveryis used to enable DNS discovery on the node. Waku DNS discovery is disabled by default.--dns-discovery-urlis mandatory if DNS discovery is enabled. It contains the URL for the node list. The URL must be in the formatenrtree://<key>@<fqdn>where<fqdn>is the fully qualified domain name and<key>is the base32 encoding of the compressed 32-byte public key that signed the list at that location.--dns-discovery-name-serveris optional and contains the IP(s) of the DNS name servers to query. If left unspecified, the Cloudflare servers1.1.1.1and1.0.0.1will be used by default.
A node will attempt connection to all discovered nodes.
This can be used, for example, to connect to one of the existing fleets. Current URLs for the published fleet lists:
- production fleet:
enrtree://AIRVQ5DDA4FFWLRBCHJWUWOO6X6S4ZTZ5B667LQ6AJU6PEYDLRD5O@sandbox.waku.nodes.status.im - test fleet:
enrtree://AOGYWMBYOUIMOENHXCHILPKY3ZRFEULMFI4DOM442QSZ73TT2A7VI@test.waku.nodes.status.im
See the separate tutorial for a complete guide to DNS discovery.
Enabling Websocket
Websocket is currently the only Waku transport supported by browser nodes that uses js-waku. Setting up websocket enables your node to directly serve browser peers.
A valid certificate is necessary to serve browser nodes,
you can use letsencrypt:
sudo letsencrypt -d <your.domain.name>
You will need the privkey.pem and fullchain.pem files.
To enable secure websocket, pass the generated files to wakunode2:
Note, the default port for websocket is 8000.
wakunode2 --websocket-secure-support=true --websocket-secure-key-path="<letsencrypt cert dir>/privkey.pem" --websocket-secure-cert-path="<letsencrypt cert dir>/fullchain.pem"
Self-signed certificates
Self-signed certificates are not recommended for production setups because:
- Browsers do not accept self-signed certificates
- Browsers do not display an error when rejecting a certificate for websocket.
However, they can be used for local testing purposes:
mkdir -p ./ssl_dir/
openssl req -x509 -newkey rsa:4096 -keyout ./ssl_dir/key.pem -out ./ssl_dir/cert.pem -sha256 -nodes
wakunode2 --websocket-secure-support=true --websocket-secure-key-path="./ssl_dir/key.pem" --websocket-secure-cert-path="./ssl_dir/cert.pem"