import confutils, config, strutils, chronos, json_rpc/rpcserver, metrics, chronicles/topics_registry, # TODO: What? Need this for setLoglevel, weird. eth/[keys, p2p, async_utils], eth/common/utils, eth/net/nat, eth/p2p/[discovery, enode, peer_pool, bootnodes, whispernodes], # TODO remove me ../v1/rpc/[wakusim, key_storage], libp2p/multiaddress, libp2p/crypto/crypto, libp2p/protocols/protocol, libp2p/peerinfo, rpc/wakurpc, ../../protocol/v2/waku_protocol, # TODO: Pull out standard switch from tests ../../tests/v2/standard_setup, waku_types # key and crypto modules different type KeyPair* = crypto.KeyPair PublicKey* = crypto.PublicKey PrivateKey* = crypto.PrivateKey const clientId = "Nimbus waku node" let globalListeningAddr = parseIpAddress("0.0.0.0") proc setBootNodes(nodes: openArray[string]): seq[ENode] = result = newSeqOfCap[ENode](nodes.len) for nodeId in nodes: # TODO: something more user friendly than an expect result.add(ENode.fromString(nodeId).expect("correct node")) proc initAddress(T: type MultiAddress, str: string): T = let address = MultiAddress.init(str) if IPFS.match(address) and matchPartial(multiaddress.TCP, address): result = address else: raise newException(MultiAddressError, "Invalid bootstrap node multi-address") proc dialPeer(p: WakuProto, address: string) {.async.} = info "dialPeer", address = address # XXX: This turns ipfs into p2p, not quite sure why let multiAddr = MultiAddress.initAddress(address) info "multiAddr", ma = multiAddr let parts = address.split("/") let remotePeer = PeerInfo.init(parts[^1], [multiAddr]) info "Dialing peer", multiAddr p.conn = await p.switch.dial(remotePeer, WakuSubCodec) info "Post switch dial" # Isn't there just one p instance? Why connected here? p.connected = true # TODO: Connect to multiple static nodes proc connectToNodes(p: WakuProto, nodes: openArray[string]) = let peerInfoStr = nodes[0] info "connectToNodes", node = peerInfoStr # XXX: Why is ipfs being replaced by p2p here? # Whats difference here? We don't have Whisper enodes etc discard dialPeer(p, peerInfoStr) # for nodeId in nodes: # info "connectToNodes nodeid", nodeId # # TODO: something more user friendly than an assert # let whisperENode = ENode.fromString(nodeId).expect("correct node") # # traceAsyncErrors node.peerPool.connectToNode(newNode(whisperENode)) # NOTE: Looks almost identical to beacon_chain/eth2_network.nim proc setupNat(conf: WakuNodeConf): tuple[ip: IpAddress, tcpPort: Port, udpPort: Port] = # defaults result.ip = globalListeningAddr result.tcpPort = Port(conf.tcpPort + conf.portsShift) result.udpPort = Port(conf.udpPort + conf.portsShift) var nat: NatStrategy case conf.nat.toLowerAscii(): of "any": nat = NatAny of "none": nat = NatNone of "upnp": nat = NatUpnp of "pmp": nat = NatPmp else: if conf.nat.startsWith("extip:") and isIpAddress(conf.nat[6..^1]): # any required port redirection is assumed to be done by hand result.ip = parseIpAddress(conf.nat[6..^1]) nat = NatNone else: error "not a valid NAT mechanism, nor a valid IP address", value = conf.nat quit(QuitFailure) if nat != NatNone: let extIP = getExternalIP(nat) if extIP.isSome: result.ip = extIP.get() let extPorts = redirectPorts(tcpPort = result.tcpPort, udpPort = result.udpPort, description = clientId) if extPorts.isSome: (result.tcpPort, result.udpPort) = extPorts.get() proc newWakuProto(switch: Switch): WakuProto = var wakuproto = WakuProto(switch: switch, codec: WakuSubCodec) proc handle(conn: Connection, proto: string) {.async, gcsafe.} = let msg = cast[string](await conn.readLp()) await conn.writeLp("Hello!") await conn.close() wakuproto.handler = handle return wakuproto proc run(config: WakuNodeConf) = info "libp2p support WIP" if config.logLevel != LogLevel.NONE: setLogLevel(config.logLevel) let # External TCP and UDP ports (ip, tcpPort, udpPort) = setupNat(config) address = Address(ip: ip, tcpPort: tcpPort, udpPort: udpPort) port = tcpPort # Using this for now DefaultAddr = "/ip4/127.0.0.1/tcp/55505" hostAddress = MultiAddress.init(DefaultAddr) # Difference between announced and host address relevant for running behind NAT, however doesn't seem like nim-libp2p supports this. GHI? # NOTE: This is a privatekey nodekey = config.nodekey keys = KeyPair(seckey: nodekey, pubkey: nodekey.getKey()) peerInfo = PeerInfo.init(nodekey) info "Initializing networking (host address and announced same)", address peerInfo.addrs.add(Multiaddress.init(DefaultAddr)) # TODO: Here setup a libp2p node # Essentially something like this in nbc/eth2_network: # proc createEth2Node*(conf: BeaconNodeConf): Future[Eth2Node] # TODO: Also see beacon_chain/beaconnode, RPC server etc # Also probably start with floodsub for simplicity # Slice it up only minimal parts here # HERE ATM # config.nodekey = KeyPair.random().tryGet() # address = set above; ip, tcp and udp port (incl NAT) # clientId = "Nimbus waku node" #let network = await createLibP2PNode(conf) # doing in-line # let rpcServer ... # Is it a "Standard" Switch? Assume it is for now # NOTE: This should be WakuSub here # XXX: Do we want to use this wakuProto? Or Switch? # We need access to the WakuSub thing # switch.pubsub = wakusub, plus all the peer info etc # And it has wakuProto lets use wakuProto maybe, cause it has switch var switch = newStandardSwitch(some keys.seckey, hostAddress, triggerSelf = true, gossip = false) let wakuProto = newWakuProto(switch) switch.mount(wakuProto) if config.rpc: let ta = initTAddress(config.rpcAddress, Port(config.rpcPort + config.portsShift)) var rpcServer = newRpcHttpServer([ta]) setupWakuRPC(wakuProto, rpcServer) rpcServer.start() info "rpcServer started", ta=ta # TODO: Make context async #let fut = await switch.start() discard switch.start() wakuProto.started = true let id = peerInfo.peerId.pretty info "PeerInfo", id = id, addrs = peerInfo.addrs # Try p2p instead let listenStr = $peerInfo.addrs[0] & "/p2p/" & id #let listenStr = $peerInfo.addrs[0] & "/ipfs/" & id # XXX: this should be /ip4..., / stripped? info "Listening on", full = listenStr # XXX: So doing this _after_ other setup # Optionally direct connect with a set of nodes if config.staticnodes.len > 0: connectToNodes(wakuProto, config.staticnodes) # Here directchat uses rwLoop for protocol # What if we dial here? How dial? # Feels very ghetto, this hookup # Once we have a switch and started it, we need to connect the them # Then we can dial a peer on a protocol # If we start node 2 this should do: # let conn = switch.dial(peerInfo, WakuCodec) # (testswitch.nim) Conn write hello # Aight so we calling here, but where # This is why nice to have RPC - how does this look in libp2p? # Is this doable with RPC in DevP2P? Probably. How? For quicksim # (quicksim.nim) Basically RPC HTTP Client and connect # Ok, now what? Quick break. Probably RPC etc? Try to dial, 1:1 style # Also not actually using GossipSub so far # We want to dial with another node # Set-up node # var node = newEthereumNode(config.nodekey, address, 1, nil, clientId, # addAllCapabilities = false) # if not config.bootnodeOnly: # node.addCapability Waku # Always enable Waku protocol # var topicInterest: Option[seq[waku_protocol.Topic]] # var bloom: Option[Bloom] # if config.wakuTopicInterest: # var topics: seq[waku_protocol.Topic] # topicInterest = some(topics) # else: # bloom = some(fullBloom()) # let wakuConfig = WakuConfig(powRequirement: config.wakuPow, # bloom: bloom, # isLightNode: config.lightNode, # maxMsgSize: waku_protocol.defaultMaxMsgSize, # topics: topicInterest) # node.configureWaku(wakuConfig) # if config.whisper or config.whisperBridge: # node.addCapability Whisper # node.protocolState(Whisper).config.powRequirement = 0.002 # if config.whisperBridge: # node.shareMessageQueue() # # # TODO: Status fleet bootnodes are discv5? That will not work. # let bootnodes = if config.bootnodes.len > 0: setBootNodes(config.bootnodes) # elif config.fleet == prod: setBootNodes(StatusBootNodes) # elif config.fleet == staging: setBootNodes(StatusBootNodesStaging) # elif config.fleet == test : setBootNodes(StatusBootNodesTest) # else: @[] # # traceAsyncErrors node.connectToNetwork(bootnodes, not config.noListen, # config.discovery) # # if not config.bootnodeOnly: # # Optionally direct connect with a set of nodes # if config.staticnodes.len > 0: connectToNodes(node, config.staticnodes) # elif config.fleet == prod: connectToNodes(node, WhisperNodes) # elif config.fleet == staging: connectToNodes(node, WhisperNodesStaging) # elif config.fleet == test: connectToNodes(node, WhisperNodesTest) # # if config.rpc: # let ta = initTAddress(config.rpcAddress, # Port(config.rpcPort + config.portsShift)) # var rpcServer = newRpcHttpServer([ta]) # let keys = newKeyStorage() # setupWakuRPC(node, keys, rpcServer) # setupWakuSimRPC(node, rpcServer) # rpcServer.start() # # when defined(insecure): # if config.metricsServer: # let # address = config.metricsServerAddress # port = config.metricsServerPort + config.portsShift # info "Starting metrics HTTP server", address, port # metrics.startHttpServer($address, Port(port)) # # if config.logMetrics: # proc logMetrics(udata: pointer) {.closure, gcsafe.} = # {.gcsafe.}: # let # connectedPeers = connected_peers.value # validEnvelopes = waku_protocol.valid_envelopes.value # invalidEnvelopes = waku_protocol.dropped_expired_envelopes.value + # waku_protocol.dropped_from_future_envelopes.value + # waku_protocol.dropped_low_pow_envelopes.value + # waku_protocol.dropped_too_large_envelopes.value + # waku_protocol.dropped_bloom_filter_mismatch_envelopes.value + # waku_protocol.dropped_topic_mismatch_envelopes.value + # waku_protocol.dropped_benign_duplicate_envelopes.value + # waku_protocol.dropped_duplicate_envelopes.value # # info "Node metrics", connectedPeers, validEnvelopes, invalidEnvelopes # addTimer(Moment.fromNow(2.seconds), logMetrics) # addTimer(Moment.fromNow(2.seconds), logMetrics) # runForever() when isMainModule: let conf = WakuNodeConf.load() run(conf)