nim-libp2p-experimental/libp2p/protocols/pubsub/rpc/protobuf.nim

267 lines
7.3 KiB
Nim
Raw Normal View History

PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
## Nim-LibP2P
## Copyright (c) 2019 Status Research & Development GmbH
## Licensed under either of
## * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE))
## * MIT license ([LICENSE-MIT](LICENSE-MIT))
## at your option.
## This file may not be copied, modified, or distributed except according to
## those terms.
import options
import chronicles
import messages,
../../../protobuf/minprotobuf,
../../../crypto/crypto,
../../../peer
proc encodeGraft*(graft: ControlGraft, pb: var ProtoBuffer) {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
pb.write(initProtoField(1, graft.topicID))
proc decodeGraft*(pb: var ProtoBuffer): seq[ControlGraft] {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
trace "decoding graft msg", buffer = pb.buffer.toHex()
while true:
var topic: string
if pb.getString(1, topic) < 0:
trace "unable to read topic field from graft msg, breaking"
break
trace "read topic field from graft msg", topicID = topic
result.add(ControlGraft(topicID: topic))
proc encodePrune*(prune: ControlPrune, pb: var ProtoBuffer) {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
pb.write(initProtoField(1, prune.topicID))
proc decodePrune*(pb: var ProtoBuffer): seq[ControlPrune] {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
trace "decoding prune msg"
while true:
var topic: string
if pb.getString(1, topic) < 0:
break
trace "read topic field", topicID = topic
result.add(ControlPrune(topicID: topic))
proc encodeIHave*(ihave: ControlIHave, pb: var ProtoBuffer) {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
pb.write(initProtoField(1, ihave.topicID))
for mid in ihave.messageIDs:
pb.write(initProtoField(2, mid))
proc decodeIHave*(pb: var ProtoBuffer): seq[ControlIHave] {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
trace "decoding ihave msg"
while true:
var control: ControlIHave
if pb.enterSubMessage() > 0:
if pb.getString(1, control.topicID) < 0:
trace "topic field missing from ihave msg"
break
trace "read topic field", topicID = control.topicID
while true:
var mid: string
if pb.getString(2, mid) < 0:
break
trace "read messageID field", mid = mid
control.messageIDs.add(mid)
result.add(control)
proc encodeIWant*(iwant: ControlIWant, pb: var ProtoBuffer) {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
for mid in iwant.messageIDs:
pb.write(initProtoField(1, mid))
proc decodeIWant*(pb: var ProtoBuffer): seq[ControlIWant] {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
trace "decoding ihave msg"
while pb.enterSubMessage() > 0:
var mid: string
var iWant: ControlIWant
while pb.getString(1, mid) > 0:
trace "read messageID field", mid = mid
iWant.messageIDs.add(mid)
result.add(iWant)
proc encodeControl*(control: ControlMessage, pb: var ProtoBuffer) {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
if control.ihave.len > 0:
var ihave = initProtoBuffer()
for h in control.ihave:
h.encodeIHave(ihave)
# write messages to protobuf
ihave.finish()
pb.write(initProtoField(1, ihave))
if control.iwant.len > 0:
var iwant = initProtoBuffer()
for w in control.iwant:
w.encodeIWant(iwant)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
# write messages to protobuf
iwant.finish()
pb.write(initProtoField(2, iwant))
if control.graft.len > 0:
var graft = initProtoBuffer()
for g in control.graft:
g.encodeGraft(graft)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
# write messages to protobuf
graft.finish()
pb.write(initProtoField(3, graft))
if control.prune.len > 0:
var prune = initProtoBuffer()
for p in control.prune:
p.encodePrune(prune)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
# write messages to protobuf
prune.finish()
pb.write(initProtoField(4, prune))
proc decodeControl*(pb: var ProtoBuffer): Option[ControlMessage] {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
trace "decoding control submessage"
var control: ControlMessage
while true:
var field = pb.enterSubMessage()
trace "processing submessage", field = field
case field:
of 0:
trace "no submessage found in Control msg"
break
of 1:
control.ihave = pb.decodeIHave()
of 2:
control.iwant = pb.decodeIWant()
of 3:
control.graft = pb.decodeGraft()
of 4:
control.prune = pb.decodePrune()
else:
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
raise newException(CatchableError, "message type not recognized")
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
if result.isNone:
result = some(control)
proc encodeSubs*(subs: SubOpts, pb: var ProtoBuffer) {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
pb.write(initProtoField(1, subs.subscribe))
pb.write(initProtoField(2, subs.topic))
proc decodeSubs*(pb: var ProtoBuffer): seq[SubOpts] {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
while true:
var subOpt: SubOpts
var subscr: uint
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
discard pb.getVarintValue(1, subscr)
subOpt.subscribe = cast[bool](subscr)
trace "read subscribe field", subscribe = subOpt.subscribe
if pb.getString(2, subOpt.topic) < 0:
break
trace "read subscribe field", topicName = subOpt.topic
result.add(subOpt)
trace "got subscriptions", subscriptions = result
proc encodeMessage*(msg: Message, pb: var ProtoBuffer) {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
pb.write(initProtoField(1, msg.fromPeer))
pb.write(initProtoField(2, msg.data))
pb.write(initProtoField(3, msg.seqno))
for t in msg.topicIDs:
pb.write(initProtoField(4, t))
if msg.signature.len > 0:
pb.write(initProtoField(5, msg.signature))
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
if msg.key.len > 0:
pb.write(initProtoField(6, msg.key))
pb.finish()
proc decodeMessages*(pb: var ProtoBuffer): seq[Message] {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
# TODO: which of this fields are really optional?
while true:
var msg: Message
if pb.getBytes(1, msg.fromPeer) < 0:
break
trace "read message field", fromPeer = msg.fromPeer
if pb.getBytes(2, msg.data) < 0:
break
trace "read message field", data = msg.data
if pb.getBytes(3, msg.seqno) < 0:
break
trace "read message field", seqno = msg.seqno
var topic: string
while true:
if pb.getString(4, topic) < 0:
break
msg.topicIDs.add(topic)
trace "read message field", topicName = topic
topic = ""
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
discard pb.getBytes(5, msg.signature)
trace "read message field", signature = msg.signature
discard pb.getBytes(6, msg.key)
trace "read message field", key = msg.key
result.add(msg)
proc encodeRpcMsg*(msg: RPCMsg): ProtoBuffer {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
result = initProtoBuffer()
trace "encoding msg: ", msg = $msg
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
if msg.subscriptions.len > 0:
var subs = initProtoBuffer()
for s in msg.subscriptions:
encodeSubs(s, subs)
# write subscriptions to protobuf
subs.finish()
result.write(initProtoField(1, subs))
if msg.messages.len > 0:
var messages = initProtoBuffer()
for m in msg.messages:
encodeMessage(m, messages)
# write messages to protobuf
messages.finish()
result.write(initProtoField(2, messages))
if msg.control.isSome:
var control = initProtoBuffer()
msg.control.get.encodeControl(control)
# write messages to protobuf
control.finish()
result.write(initProtoField(3, control))
if result.buffer.len > 0:
result.finish()
proc decodeRpcMsg*(msg: seq[byte]): RPCMsg {.gcsafe.} =
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
var pb = initProtoBuffer(msg)
result.subscriptions = newSeq[SubOpts]()
while true:
# decode SubOpts array
var field = pb.enterSubMessage()
trace "processing submessage", field = field
case field:
of 0:
trace "no submessage found in RPC msg"
break
of 1:
result.subscriptions = pb.decodeSubs()
of 2:
result.messages = pb.decodeMessages()
of 3:
result.control = pb.decodeControl()
else:
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
raise newException(CatchableError, "message type not recognized")