nim-libp2p-experimental/tests/pubsub/testgossipsub.nim

719 lines
19 KiB
Nim
Raw Normal View History

PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
## Nim-Libp2p
## Copyright (c) 2018 Status Research & Development GmbH
## Licensed under either of
## * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE))
## * MIT license ([LICENSE-MIT](LICENSE-MIT))
## at your option.
## This file may not be copied, modified, or distributed except according to
## those terms.
2020-05-08 20:58:23 +00:00
{.used.}
2020-01-10 03:59:27 +00:00
import unittest, sequtils, options, tables, sets
2020-06-03 02:21:11 +00:00
import chronos, stew/byteutils
import chronicles
import utils, ../../libp2p/[errors,
peerid,
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
peerinfo,
stream/connection,
stream/bufferstream,
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
crypto/crypto,
protocols/pubsub/pubsub,
protocols/pubsub/gossipsub,
protocols/pubsub/pubsubpeer,
protocols/pubsub/peertable,
protocols/pubsub/rpc/messages]
import ../helpers
proc waitSub(sender, receiver: auto; key: string) {.async, gcsafe.} =
if sender == receiver:
return
# turn things deterministic
# this is for testing purposes only
# peers can be inside `mesh` and `fanout`, not just `gossipsub`
var ceil = 15
let fsub = GossipSub(sender)
Gossip one one (#240) * allow multiple codecs per protocol (without breaking things) * add 1.1 protocol to gossip * explicit peering part 1 * explicit peering part 2 * explicit peering part 3 * PeerInfo and ControlPrune protocols * fix encodePrune * validated always, even explicit peers * prune by score (score is stub still) * add a way to pass parameters to gossip * standard setup fixes * take into account explicit direct peers in publish * add floodPublish logic * small fixes, publish still half broken * make sure to waitsub in sparse test * use var semantics to optimize table access * wip... lvalues don't work properly sadly... * big publish refactor, replenish and balance * fix internal tests * use g.peers for fanout (todo: don't include flood peers) * exclude non gossip from fanout * internal test fixes * fix flood tests * fix test's trypublish * test interop fixes * make sure to not remove peers from gossip table * restore old replenishFanout * cleanups * restore utility module import * restore trace vs debug in gossip * improve fanout replenish behavior further * triage publish nil peers (issue is on master too but just hidden behind a if/in) * getGossipPeers fixes * remove topics from pubsubpeer (was unused) * simplify rebalanceMesh (following spec) and make it finally reach D_high * better diagnostics * merge new pubsubpeer, copy 1.1 to new module * fix up merge * conditional enable gossip11 module * add back topics in peers, re-enable flood publish * add more heartbeat locking to prevent races * actually lock the heartbeat * minor fixes * with sugar * merge 1.0 * remove assertion in publish * fix multistream 1.1 multi proto * Fix merge oops * wip * fix gossip 11 upstream * gossipsub11 -> gossipsub * support interop testing * tests fixing * fix directchat build * control prune updates (pb) * wip parameters * gossip internal tests fixes * parameters wip * finishup with params * cleanups/wip * small sugar * grafted and pruned procs * wip updateScores * wip * fix logging issue * pubsubpeer, chronicles explicit override * fix internal gossip tests * wip * tables troubleshooting * score wip * score wip * fixes * fix test utils generateNodes * don't delete while iterating in score update * fix grafted defect * add a handleConnect in subscribeTopic * pruning improvements * wip * score fixes * post merge - builds gossip tests * further merge fixes * rebalance improvements and opportunistic grafting * fix test for now * restore explicit peering * implement peer exchange graft message * add an hard cap to PX * backoff time management * IWANT cap/budget * Adaptive gossip dissemination * outbound mesh quota, internal tests fixing * oversub prune score based, finish outbound quota * finishup with score and ihave budget * use go daemon 0.3.0 * import fixes * byScore cleanup score sorting * remove pointless scaling in `/` Duration operator * revert using libp2p org for daemon * interop fixes * fixes and cleanup * remove heartbeat assertion, minor debug fixes * logging improvements and cleaning up * (to revert) add some traces * add explicit topic to gossip rpcs * pubsub merge fixes and type fix in switch * Revert "(to revert) add some traces" This reverts commit 4663eaab6cc336c81cee50bc54025cf0b7bcbd99. * cleanup some now irrelevant todo * shuffle peers anyway as score might be disabled * add missing shuffle * old merge fix * more merge fixes * debug improvements * re-enable gossip internal tests * add gossip10 fallback (dormant but tested) * split gossipsub internal tests into 1.0 and 1.1 Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 09:16:29 +00:00
let ev = newAsyncEvent()
fsub.heartbeatEvents.add(ev)
# await first heartbeat
await ev.wait()
ev.clear()
while (not fsub.gossipsub.hasKey(key) or
not fsub.gossipsub.hasPeerID(key, receiver.peerInfo.peerId)) and
(not fsub.mesh.hasKey(key) or
not fsub.mesh.hasPeerID(key, receiver.peerInfo.peerId)) and
(not fsub.fanout.hasKey(key) or
not fsub.fanout.hasPeerID(key , receiver.peerInfo.peerId)):
trace "waitSub sleeping..."
Gossip one one (#240) * allow multiple codecs per protocol (without breaking things) * add 1.1 protocol to gossip * explicit peering part 1 * explicit peering part 2 * explicit peering part 3 * PeerInfo and ControlPrune protocols * fix encodePrune * validated always, even explicit peers * prune by score (score is stub still) * add a way to pass parameters to gossip * standard setup fixes * take into account explicit direct peers in publish * add floodPublish logic * small fixes, publish still half broken * make sure to waitsub in sparse test * use var semantics to optimize table access * wip... lvalues don't work properly sadly... * big publish refactor, replenish and balance * fix internal tests * use g.peers for fanout (todo: don't include flood peers) * exclude non gossip from fanout * internal test fixes * fix flood tests * fix test's trypublish * test interop fixes * make sure to not remove peers from gossip table * restore old replenishFanout * cleanups * restore utility module import * restore trace vs debug in gossip * improve fanout replenish behavior further * triage publish nil peers (issue is on master too but just hidden behind a if/in) * getGossipPeers fixes * remove topics from pubsubpeer (was unused) * simplify rebalanceMesh (following spec) and make it finally reach D_high * better diagnostics * merge new pubsubpeer, copy 1.1 to new module * fix up merge * conditional enable gossip11 module * add back topics in peers, re-enable flood publish * add more heartbeat locking to prevent races * actually lock the heartbeat * minor fixes * with sugar * merge 1.0 * remove assertion in publish * fix multistream 1.1 multi proto * Fix merge oops * wip * fix gossip 11 upstream * gossipsub11 -> gossipsub * support interop testing * tests fixing * fix directchat build * control prune updates (pb) * wip parameters * gossip internal tests fixes * parameters wip * finishup with params * cleanups/wip * small sugar * grafted and pruned procs * wip updateScores * wip * fix logging issue * pubsubpeer, chronicles explicit override * fix internal gossip tests * wip * tables troubleshooting * score wip * score wip * fixes * fix test utils generateNodes * don't delete while iterating in score update * fix grafted defect * add a handleConnect in subscribeTopic * pruning improvements * wip * score fixes * post merge - builds gossip tests * further merge fixes * rebalance improvements and opportunistic grafting * fix test for now * restore explicit peering * implement peer exchange graft message * add an hard cap to PX * backoff time management * IWANT cap/budget * Adaptive gossip dissemination * outbound mesh quota, internal tests fixing * oversub prune score based, finish outbound quota * finishup with score and ihave budget * use go daemon 0.3.0 * import fixes * byScore cleanup score sorting * remove pointless scaling in `/` Duration operator * revert using libp2p org for daemon * interop fixes * fixes and cleanup * remove heartbeat assertion, minor debug fixes * logging improvements and cleaning up * (to revert) add some traces * add explicit topic to gossip rpcs * pubsub merge fixes and type fix in switch * Revert "(to revert) add some traces" This reverts commit 4663eaab6cc336c81cee50bc54025cf0b7bcbd99. * cleanup some now irrelevant todo * shuffle peers anyway as score might be disabled * add missing shuffle * old merge fix * more merge fixes * debug improvements * re-enable gossip internal tests * add gossip10 fallback (dormant but tested) * split gossipsub internal tests into 1.0 and 1.1 Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 09:16:29 +00:00
# await more heartbeats
await ev.wait()
ev.clear()
dec ceil
doAssert(ceil > 0, "waitSub timeout!")
template tryPublish(call: untyped, require: int, wait: Duration = 1.seconds, times: int = 10): untyped =
var
limit = times
pubs = 0
while pubs < require and limit > 0:
pubs = pubs + call
await sleepAsync(wait)
limit.dec()
if limit == 0:
doAssert(false, "Failed to publish!")
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
suite "GossipSub":
teardown:
checkTrackers()
asyncTest "GossipSub validation should succeed":
var handlerFut = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
handlerFut.complete(true)
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
2020-01-07 08:06:27 +00:00
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
var subs: seq[Future[void]]
subs &= waitSub(nodes[1], nodes[0], "foobar")
subs &= waitSub(nodes[0], nodes[1], "foobar")
await allFuturesThrowing(subs)
var validatorFut = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
check topic == "foobar"
validatorFut.complete(true)
result = ValidationResult.Accept
nodes[1].addValidator("foobar", validator)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check (await validatorFut) and (await handlerFut)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
Gossip one one (#240) * allow multiple codecs per protocol (without breaking things) * add 1.1 protocol to gossip * explicit peering part 1 * explicit peering part 2 * explicit peering part 3 * PeerInfo and ControlPrune protocols * fix encodePrune * validated always, even explicit peers * prune by score (score is stub still) * add a way to pass parameters to gossip * standard setup fixes * take into account explicit direct peers in publish * add floodPublish logic * small fixes, publish still half broken * make sure to waitsub in sparse test * use var semantics to optimize table access * wip... lvalues don't work properly sadly... * big publish refactor, replenish and balance * fix internal tests * use g.peers for fanout (todo: don't include flood peers) * exclude non gossip from fanout * internal test fixes * fix flood tests * fix test's trypublish * test interop fixes * make sure to not remove peers from gossip table * restore old replenishFanout * cleanups * restore utility module import * restore trace vs debug in gossip * improve fanout replenish behavior further * triage publish nil peers (issue is on master too but just hidden behind a if/in) * getGossipPeers fixes * remove topics from pubsubpeer (was unused) * simplify rebalanceMesh (following spec) and make it finally reach D_high * better diagnostics * merge new pubsubpeer, copy 1.1 to new module * fix up merge * conditional enable gossip11 module * add back topics in peers, re-enable flood publish * add more heartbeat locking to prevent races * actually lock the heartbeat * minor fixes * with sugar * merge 1.0 * remove assertion in publish * fix multistream 1.1 multi proto * Fix merge oops * wip * fix gossip 11 upstream * gossipsub11 -> gossipsub * support interop testing * tests fixing * fix directchat build * control prune updates (pb) * wip parameters * gossip internal tests fixes * parameters wip * finishup with params * cleanups/wip * small sugar * grafted and pruned procs * wip updateScores * wip * fix logging issue * pubsubpeer, chronicles explicit override * fix internal gossip tests * wip * tables troubleshooting * score wip * score wip * fixes * fix test utils generateNodes * don't delete while iterating in score update * fix grafted defect * add a handleConnect in subscribeTopic * pruning improvements * wip * score fixes * post merge - builds gossip tests * further merge fixes * rebalance improvements and opportunistic grafting * fix test for now * restore explicit peering * implement peer exchange graft message * add an hard cap to PX * backoff time management * IWANT cap/budget * Adaptive gossip dissemination * outbound mesh quota, internal tests fixing * oversub prune score based, finish outbound quota * finishup with score and ihave budget * use go daemon 0.3.0 * import fixes * byScore cleanup score sorting * remove pointless scaling in `/` Duration operator * revert using libp2p org for daemon * interop fixes * fixes and cleanup * remove heartbeat assertion, minor debug fixes * logging improvements and cleaning up * (to revert) add some traces * add explicit topic to gossip rpcs * pubsub merge fixes and type fix in switch * Revert "(to revert) add some traces" This reverts commit 4663eaab6cc336c81cee50bc54025cf0b7bcbd99. * cleanup some now irrelevant todo * shuffle peers anyway as score might be disabled * add missing shuffle * old merge fix * more merge fixes * debug improvements * re-enable gossip internal tests * add gossip10 fallback (dormant but tested) * split gossipsub internal tests into 1.0 and 1.1 Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 09:16:29 +00:00
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
Gossip one one (#240) * allow multiple codecs per protocol (without breaking things) * add 1.1 protocol to gossip * explicit peering part 1 * explicit peering part 2 * explicit peering part 3 * PeerInfo and ControlPrune protocols * fix encodePrune * validated always, even explicit peers * prune by score (score is stub still) * add a way to pass parameters to gossip * standard setup fixes * take into account explicit direct peers in publish * add floodPublish logic * small fixes, publish still half broken * make sure to waitsub in sparse test * use var semantics to optimize table access * wip... lvalues don't work properly sadly... * big publish refactor, replenish and balance * fix internal tests * use g.peers for fanout (todo: don't include flood peers) * exclude non gossip from fanout * internal test fixes * fix flood tests * fix test's trypublish * test interop fixes * make sure to not remove peers from gossip table * restore old replenishFanout * cleanups * restore utility module import * restore trace vs debug in gossip * improve fanout replenish behavior further * triage publish nil peers (issue is on master too but just hidden behind a if/in) * getGossipPeers fixes * remove topics from pubsubpeer (was unused) * simplify rebalanceMesh (following spec) and make it finally reach D_high * better diagnostics * merge new pubsubpeer, copy 1.1 to new module * fix up merge * conditional enable gossip11 module * add back topics in peers, re-enable flood publish * add more heartbeat locking to prevent races * actually lock the heartbeat * minor fixes * with sugar * merge 1.0 * remove assertion in publish * fix multistream 1.1 multi proto * Fix merge oops * wip * fix gossip 11 upstream * gossipsub11 -> gossipsub * support interop testing * tests fixing * fix directchat build * control prune updates (pb) * wip parameters * gossip internal tests fixes * parameters wip * finishup with params * cleanups/wip * small sugar * grafted and pruned procs * wip updateScores * wip * fix logging issue * pubsubpeer, chronicles explicit override * fix internal gossip tests * wip * tables troubleshooting * score wip * score wip * fixes * fix test utils generateNodes * don't delete while iterating in score update * fix grafted defect * add a handleConnect in subscribeTopic * pruning improvements * wip * score fixes * post merge - builds gossip tests * further merge fixes * rebalance improvements and opportunistic grafting * fix test for now * restore explicit peering * implement peer exchange graft message * add an hard cap to PX * backoff time management * IWANT cap/budget * Adaptive gossip dissemination * outbound mesh quota, internal tests fixing * oversub prune score based, finish outbound quota * finishup with score and ihave budget * use go daemon 0.3.0 * import fixes * byScore cleanup score sorting * remove pointless scaling in `/` Duration operator * revert using libp2p org for daemon * interop fixes * fixes and cleanup * remove heartbeat assertion, minor debug fixes * logging improvements and cleaning up * (to revert) add some traces * add explicit topic to gossip rpcs * pubsub merge fixes and type fix in switch * Revert "(to revert) add some traces" This reverts commit 4663eaab6cc336c81cee50bc54025cf0b7bcbd99. * cleanup some now irrelevant todo * shuffle peers anyway as score might be disabled * add missing shuffle * old merge fix * more merge fixes * debug improvements * re-enable gossip internal tests * add gossip10 fallback (dormant but tested) * split gossipsub internal tests into 1.0 and 1.1 Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 09:16:29 +00:00
await allFuturesThrowing(nodesFut.concat())
Gossip one one (#240) * allow multiple codecs per protocol (without breaking things) * add 1.1 protocol to gossip * explicit peering part 1 * explicit peering part 2 * explicit peering part 3 * PeerInfo and ControlPrune protocols * fix encodePrune * validated always, even explicit peers * prune by score (score is stub still) * add a way to pass parameters to gossip * standard setup fixes * take into account explicit direct peers in publish * add floodPublish logic * small fixes, publish still half broken * make sure to waitsub in sparse test * use var semantics to optimize table access * wip... lvalues don't work properly sadly... * big publish refactor, replenish and balance * fix internal tests * use g.peers for fanout (todo: don't include flood peers) * exclude non gossip from fanout * internal test fixes * fix flood tests * fix test's trypublish * test interop fixes * make sure to not remove peers from gossip table * restore old replenishFanout * cleanups * restore utility module import * restore trace vs debug in gossip * improve fanout replenish behavior further * triage publish nil peers (issue is on master too but just hidden behind a if/in) * getGossipPeers fixes * remove topics from pubsubpeer (was unused) * simplify rebalanceMesh (following spec) and make it finally reach D_high * better diagnostics * merge new pubsubpeer, copy 1.1 to new module * fix up merge * conditional enable gossip11 module * add back topics in peers, re-enable flood publish * add more heartbeat locking to prevent races * actually lock the heartbeat * minor fixes * with sugar * merge 1.0 * remove assertion in publish * fix multistream 1.1 multi proto * Fix merge oops * wip * fix gossip 11 upstream * gossipsub11 -> gossipsub * support interop testing * tests fixing * fix directchat build * control prune updates (pb) * wip parameters * gossip internal tests fixes * parameters wip * finishup with params * cleanups/wip * small sugar * grafted and pruned procs * wip updateScores * wip * fix logging issue * pubsubpeer, chronicles explicit override * fix internal gossip tests * wip * tables troubleshooting * score wip * score wip * fixes * fix test utils generateNodes * don't delete while iterating in score update * fix grafted defect * add a handleConnect in subscribeTopic * pruning improvements * wip * score fixes * post merge - builds gossip tests * further merge fixes * rebalance improvements and opportunistic grafting * fix test for now * restore explicit peering * implement peer exchange graft message * add an hard cap to PX * backoff time management * IWANT cap/budget * Adaptive gossip dissemination * outbound mesh quota, internal tests fixing * oversub prune score based, finish outbound quota * finishup with score and ihave budget * use go daemon 0.3.0 * import fixes * byScore cleanup score sorting * remove pointless scaling in `/` Duration operator * revert using libp2p org for daemon * interop fixes * fixes and cleanup * remove heartbeat assertion, minor debug fixes * logging improvements and cleaning up * (to revert) add some traces * add explicit topic to gossip rpcs * pubsub merge fixes and type fix in switch * Revert "(to revert) add some traces" This reverts commit 4663eaab6cc336c81cee50bc54025cf0b7bcbd99. * cleanup some now irrelevant todo * shuffle peers anyway as score might be disabled * add missing shuffle * old merge fix * more merge fixes * debug improvements * re-enable gossip internal tests * add gossip10 fallback (dormant but tested) * split gossipsub internal tests into 1.0 and 1.1 Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-09-21 09:16:29 +00:00
asyncTest "GossipSub validation should fail (reject)":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check false # if we get here, it should fail
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
var subs: seq[Future[void]]
subs &= waitSub(nodes[1], nodes[0], "foobar")
subs &= waitSub(nodes[0], nodes[1], "foobar")
await allFuturesThrowing(subs)
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
check:
gossip1.mesh["foobar"].len == 1 and "foobar" notin gossip1.fanout
gossip2.mesh["foobar"].len == 1 and "foobar" notin gossip2.fanout
var validatorFut = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
result = ValidationResult.Reject
validatorFut.complete(true)
nodes[1].addValidator("foobar", validator)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check (await validatorFut) == true
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "GossipSub validation should fail (ignore)":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check false # if we get here, it should fail
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
var subs: seq[Future[void]]
subs &= waitSub(nodes[1], nodes[0], "foobar")
subs &= waitSub(nodes[0], nodes[1], "foobar")
await allFuturesThrowing(subs)
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
check:
gossip1.mesh["foobar"].len == 1 and "foobar" notin gossip1.fanout
gossip2.mesh["foobar"].len == 1 and "foobar" notin gossip2.fanout
var validatorFut = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
result = ValidationResult.Ignore
validatorFut.complete(true)
nodes[1].addValidator("foobar", validator)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
check (await validatorFut) == true
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "GossipSub validation one fails and one succeeds":
var handlerFut = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foo"
handlerFut.complete(true)
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
await subscribeNodes(nodes)
nodes[1].subscribe("foo", handler)
nodes[1].subscribe("bar", handler)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
var passed, failed: Future[bool] = newFuture[bool]()
proc validator(topic: string,
message: Message):
Future[ValidationResult] {.async.} =
result = if topic == "foo":
passed.complete(true)
ValidationResult.Accept
else:
failed.complete(true)
ValidationResult.Reject
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[1].addValidator("foo", "bar", validator)
tryPublish await nodes[0].publish("foo", "Hello!".toBytes()), 1
tryPublish await nodes[0].publish("bar", "Hello!".toBytes()), 1
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check ((await passed) and (await failed) and (await handlerFut))
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
check:
"foo" notin gossip1.mesh and gossip1.fanout["foo"].len == 1
"foo" notin gossip2.mesh and "foo" notin gossip2.fanout
"bar" notin gossip1.mesh and gossip1.fanout["bar"].len == 1
"bar" notin gossip2.mesh and "bar" notin gossip2.fanout
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub should add remote peer topic subscriptions":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
discard
let
nodes = generateNodes(
2,
gossip = true,
secureManagers = [SecureProtocol.Noise])
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
await subscribeNodes(nodes)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[1].subscribe("foobar", handler)
await sleepAsync(10.seconds)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
let gossip1 = GossipSub(nodes[0])
let gossip2 = GossipSub(nodes[1])
check:
"foobar" in gossip2.topics
"foobar" in gossip1.gossipsub
gossip1.gossipsub.hasPeerID("foobar", gossip2.peerInfo.peerId)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub should add remote peer topic subscriptions if both peers are subscribed":
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
discard
let
nodes = generateNodes(
2,
gossip = true,
secureManagers = [SecureProtocol.Secio])
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
var subs: seq[Future[void]]
subs &= waitSub(nodes[1], nodes[0], "foobar")
subs &= waitSub(nodes[0], nodes[1], "foobar")
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
await allFuturesThrowing(subs)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
let
gossip1 = GossipSub(nodes[0])
gossip2 = GossipSub(nodes[1])
check:
"foobar" in gossip1.topics
"foobar" in gossip2.topics
"foobar" in gossip1.gossipsub
"foobar" in gossip2.gossipsub
gossip1.gossipsub.hasPeerID("foobar", gossip2.peerInfo.peerId) or
gossip1.mesh.hasPeerID("foobar", gossip2.peerInfo.peerId)
gossip2.gossipsub.hasPeerID("foobar", gossip1.peerInfo.peerId) or
gossip2.mesh.hasPeerID("foobar", gossip1.peerInfo.peerId)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub send over fanout A -> B":
var passed = newFuture[void]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
passed.complete()
let
nodes = generateNodes(
2,
gossip = true,
secureManagers = [SecureProtocol.Secio])
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
await subscribeNodes(nodes)
nodes[1].subscribe("foobar", handler)
await waitSub(nodes[0], nodes[1], "foobar")
var observed = 0
let
obs1 = PubSubObserver(onRecv: proc(peer: PubSubPeer; msgs: var RPCMsg) =
inc observed
)
obs2 = PubSubObserver(onSend: proc(peer: PubSubPeer; msgs: var RPCMsg) =
inc observed
)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[1].addObserver(obs1)
nodes[0].addObserver(obs2)
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
var gossip1: GossipSub = GossipSub(nodes[0])
var gossip2: GossipSub = GossipSub(nodes[1])
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check:
"foobar" in gossip1.gossipsub
gossip1.fanout.hasPeerID("foobar", gossip2.peerInfo.peerId)
not gossip1.mesh.hasPeerID("foobar", gossip2.peerInfo.peerId)
await passed.wait(2.seconds)
trace "test done, stopping..."
await nodes[0].stop()
await nodes[1].stop()
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())
check observed == 2
asyncTest "e2e - GossipSub send over mesh A -> B":
var passed: Future[bool] = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
passed.complete(true)
let
nodes = generateNodes(
2,
gossip = true,
secureManagers = [SecureProtocol.Secio])
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
await subscribeNodes(nodes)
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
await waitSub(nodes[0], nodes[1], "foobar")
2020-01-07 08:06:27 +00:00
tryPublish await nodes[0].publish("foobar", "Hello!".toBytes()), 1
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check await passed
var gossip1: GossipSub = GossipSub(nodes[0])
var gossip2: GossipSub = GossipSub(nodes[1])
PubSub (Gossip & Flood) Implementation (#36) This adds gossipsub and floodsub, as well as basic interop testing with the go libp2p daemon. * add close event * wip: gossipsub * splitting rpc message * making message handling more consistent * initial gossipsub implementation * feat: nim 1.0 cleanup * wip: gossipsub protobuf * adding encoding/decoding of gossipsub messages * add disconnect handler * add proper gossipsub msg handling * misc: cleanup for nim 1.0 * splitting floodsub and gossipsub tests * feat: add mesh rebalansing * test pubsub * add mesh rebalansing tests * testing mesh maintenance * finishing mcache implementatin * wip: commenting out broken tests * wip: don't run heartbeat for now * switchout debug for trace logging * testing gossip peer selection algorithm * test stream piping * more work around message amplification * get the peerid from message * use timed cache as backing store * allow setting timeout in constructor * several changes to improve performance * more through testing of msg amplification * prevent gc issues * allow piping to self and prevent deadlocks * improove floodsub * allow running hook on cache eviction * prevent race conditions * prevent race conditions and improove tests * use hashes as cache keys * removing useless file * don't create a new seq * re-enable pubsub tests * fix imports * reduce number of runs to speed up tests * break out control message processing * normalize sleeps between steps * implement proper transport filtering * initial interop testing * clean up floodsub publish logic * allow dialing without a protocol * adding multiple reads/writes * use protobuf varint in mplex * don't loose conn's peerInfo * initial interop pubsub tests * don't duplicate connections/peers * bring back interop tests * wip: interop * re-enable interop and daemon tests * add multiple read write tests from handlers * don't cleanup channel prematurely * use correct channel to send/receive msgs * adjust tests with latest changes * include interop tests * remove temp logging output * fix ci * use correct public key serialization * additional tests for pubsub interop
2019-12-06 02:16:18 +00:00
check:
"foobar" in gossip1.gossipsub
"foobar" in gossip2.gossipsub
gossip1.mesh.hasPeerID("foobar", gossip2.peerInfo.peerId)
not gossip1.fanout.hasPeerID("foobar", gossip2.peerInfo.peerId)
gossip2.mesh.hasPeerID("foobar", gossip1.peerInfo.peerId)
not gossip2.fanout.hasPeerID("foobar", gossip1.peerInfo.peerId)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())
asyncTest "e2e - GossipSub with multiple peers":
var runs = 10
let
nodes = generateNodes(runs, gossip = true, triggerSelf = true)
nodesFut = nodes.mapIt(it.switch.start())
await allFuturesThrowing(nodes.mapIt(it.start()))
await subscribeNodes(nodes)
var seen: Table[string, int]
var seenFut = newFuture[void]()
for i in 0..<nodes.len:
let dialer = nodes[i]
var handler: TopicHandler
closureScope:
var peerName = $dialer.peerInfo.peerId
handler = proc(topic: string, data: seq[byte]) {.async, gcsafe, closure.} =
if peerName notin seen:
seen[peerName] = 0
seen[peerName].inc
check topic == "foobar"
if not seenFut.finished() and seen.len >= runs:
seenFut.complete()
dialer.subscribe("foobar", handler)
await waitSub(nodes[0], dialer, "foobar")
tryPublish await wait(nodes[0].publish("foobar",
toBytes("from node " &
$nodes[0].peerInfo.peerId)),
1.minutes), 1, 5.seconds
await wait(seenFut, 2.minutes)
check: seen.len >= runs
for k, v in seen.pairs:
check: v >= 1
for node in nodes:
var gossip = GossipSub(node)
check:
"foobar" in gossip.gossipsub
await allFuturesThrowing(
nodes.mapIt(
allFutures(
it.stop(),
it.switch.stop())))
await allFuturesThrowing(nodesFut)
asyncTest "e2e - GossipSub with multiple peers (sparse)":
var runs = 10
let
nodes = generateNodes(runs, gossip = true, triggerSelf = true)
nodesFut = nodes.mapIt(it.switch.start())
await allFuturesThrowing(nodes.mapIt(it.start()))
await subscribeNodes(nodes)
var seen: Table[string, int]
var seenFut = newFuture[void]()
for i in 0..<nodes.len:
let dialer = nodes[i]
var handler: TopicHandler
closureScope:
var peerName = $dialer.peerInfo.peerId
handler = proc(topic: string, data: seq[byte]) {.async, gcsafe, closure.} =
if peerName notin seen:
seen[peerName] = 0
seen[peerName].inc
check topic == "foobar"
if not seenFut.finished() and seen.len >= runs:
seenFut.complete()
dialer.subscribe("foobar", handler)
await waitSub(nodes[0], dialer, "foobar")
tryPublish await wait(nodes[0].publish("foobar",
toBytes("from node " &
$nodes[0].peerInfo.peerId)),
1.minutes), 1, 5.seconds
await wait(seenFut, 5.minutes)
check: seen.len >= runs
for k, v in seen.pairs:
check: v >= 1
for node in nodes:
var gossip = GossipSub(node)
check:
"foobar" in gossip.gossipsub
gossip.fanout.len == 0
gossip.mesh["foobar"].len > 0
await allFuturesThrowing(
nodes.mapIt(
allFutures(
it.stop(),
it.switch.stop())))
2020-01-10 03:59:27 +00:00
await allFuturesThrowing(nodesFut)
asyncTest "GossipSub invalid topic subscription":
var handlerFut = newFuture[bool]()
proc handler(topic: string, data: seq[byte]) {.async, gcsafe.} =
check topic == "foobar"
handlerFut.complete(true)
let
nodes = generateNodes(2, gossip = true)
# start switches
nodesFut = await allFinished(
nodes[0].switch.start(),
nodes[1].switch.start(),
)
# start pubsub
await allFuturesThrowing(
allFinished(
nodes[0].start(),
nodes[1].start(),
))
var gossip = GossipSub(nodes[0])
let invalidDetected = newFuture[void]()
gossip.subscriptionValidator =
proc(topic: string): bool =
if topic == "foobar":
try:
invalidDetected.complete()
except:
raise newException(Defect, "Exception during subscriptionValidator")
false
else:
true
await subscribeNodes(nodes)
nodes[0].subscribe("foobar", handler)
nodes[1].subscribe("foobar", handler)
await invalidDetected.wait(10.seconds)
await allFuturesThrowing(
nodes[0].switch.stop(),
nodes[1].switch.stop()
)
await allFuturesThrowing(
nodes[0].stop(),
nodes[1].stop()
)
await allFuturesThrowing(nodesFut.concat())