Commit Graph

119 Commits

Author SHA1 Message Date
Siddarth Kumar 672358fbce
deps: bump react-native-linear-gradient library (#20329)
`react-native-linear-gradient` library has to be upgraded to `3.0.0-alpha.1` for new architecture support on `Android`.
2024-06-12 13:43:26 +05:30
Icaro Motta 615ad2f02b
dx(debug)_: Add FlowStorm, a tracing debugger for Clojure(Script) (#20054)
Adds FlowStorm https://github.com/flow-storm/flow-storm-debugger v3.7.5, a well
known (tracing) debugger for Clojure(Script).

With FlowStorm, you can debug almost any cljs function in status-mobile. And
although it is not as capable as on the JVM, its main features work well enough.

How do I use it? Please, check the markdown diff in this PR: doc/debugging.md.

When would you use FlowStorm in status-mobile? You can use it all the time if
you want, but FlowStorm can be a powerful tool to understand complex pieces of
code. Consider those large subscriptions or event handlers. Or all those
components with lots of bindings and calculations. Understanding some of these
things is no easy task, even with a REPL. It is not a replacement for re-frisk,
those are very different tools and each have their place.

Resources:

- Repository: https://github.com/flow-storm/flow-storm-debugger
- Documentation: https://flow-storm.github.io/flow-storm-debugger
- Features: https://github.com/flow-storm/flow-storm-debugger#features
- YouTube demos: https://github.com/flow-storm/flow-storm-debugger#some-demo-videos-newers-at-the-top
2024-06-03 19:47:10 -03:00
Siddarth Kumar f65c10502b
pick between JSC & Hermes for Android (#20171)
We implement both `JSC` and `Hermes` in build phase of `Android` which increases our `APK` size by ~ `2 MB`.
This was fine before but currently we have to get below the `100 MB` limit.

This commit implements the preferred engine after inferring `hermesEnabled`  property from gradle.properties
This property is modified at build time for release here
178d62bd27/nix/mobile/android/build.nix (L17)
and set for debug here
178d62bd27/Makefile (L280)

Which should further reduce the `APK` size by `2 MB`.
2024-05-24 21:02:32 +05:30
Siddarth Kumar 4cdbfb6cc6
enable proguard, modify rules & upgrade okhttp lib (#19975)
This commit enables proguard minification and adds exceptions in proguard rules for the following classes :
- org.bouncycastle
- im.status.ethereum.BuildConfig
- com.reactnativenavigation

This commit also upgrades okhttp gradle dependency to 4.11.0

This should shave off a few MBs in the android bundle.
2024-05-20 21:09:03 +05:30
Jamie Caprani 8f0840e913
chore(onboarding): remove parallax (#20026)
---------

Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
2024-05-15 14:31:25 +02:00
Icaro Motta 16398dfd55
Upgrade re-frame to latest (#19931)
Upgrade re-frame to latest, from v1.3.0 (released on
2022-08-27) to latest v1.4.3 (released on 2024-01-25).

Important changes:

- [Added] re-frame.alpha namespace, for testing proposed features (see flows
  (https://github.com/day8/re-frame/discussions/795) and polymorphic
  subscriptions https://github.com/day8/re-frame/issues/680#issuecomment-1676487563).
- [Added] dispatch-sync now emits a :sync trace to indicate when it has
  finished.
- Re-frame upgraded its dependency on Reagent to latest v1.2.0.
- There are two breaking changes in v1.4.0, but they don't affect us because we
  don't use interceptors path and unwrap.
2024-05-13 21:18:16 -03:00
Icaro Motta 52a6f5c17d
Upgrade clj-kondo to 2024.03.13 (#19930)
This PR upgrades clj-kondo (our Clojure linter) from v2023-09-07 to
v2024-03-13, so ~6 months of development updates.

You can check out the changes starting at
https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20231020.
Nothing terribly useful to us this time, but as usual, clj-kondo can catch
more problems and more reliably than before.
2024-05-09 12:04:31 -03:00
Brian Sztamfater 07fb3610d1
chore: add wallet connect library (#19758)
Signed-off-by: Brian Sztamfater <brian@status.im>
2024-05-08 05:51:45 -03:00
Siddarth Kumar 9db49b8ca0
move rn-mail code to our native modules (#19760)
In this commit we nuke the unmaintained library `react-native-mail` and move over the logic to our native modules.
This also helps to fix `make nix-update-gradle` which would fail because of that library.

- Android
- iOS

status: ready
2024-04-24 11:55:40 +02:00
Siddarth Kumar ce69df19ac
apply patches with patch files (#19451)
fixes #19449

In this commit we change the way patches are applied.
We no longer have to write patches in a patch phase like we used to, we can now place individual changes in a patch file inside the `patches` directory and they will be automatically applied.

Because of this change we can get rid of forks and instead have those changes in patch files.

To generate a patch file this make command can be used `make patch-file`
This will open an interactive shell which will allow you to specify which file you want to patch and then wait till you make those changes and generate a patch for it.

```
make patch-file
Configuring Nix shell for target 'default'...
Enter the path of the file to patch: ./node_modules/is-glob/index.js
File to patch: ./node_modules/is-glob/index.js
Temporary directory created: /tmp/tmp-status-mobile-40bc588fa/tmp.xrXarXoTPZ
Original file copied to temporary directory.
Please make the necessary changes to the file: ./node_modules/is-glob/index.js
Press any key when you are done with the changes...
Generating patch file...
Patch file created at /Users/siddarthkumar/code/status-im/PR/status-mobile/patches/index.js.patch
Info: Please execute 'make run-clojure' to test if the patch file works as expected.
```

- Android
- iOS
2024-04-08 21:06:41 +05:30
Siddarth Kumar da25280555
clean up unused libraries (#19456)
## Summary

This PR removes all of the unused `npm` libraries and their corresponding `gradle`/`cocoapods` dependencies.
The list of npm dependencies removed are :
- `@babel/preset-typescript`
- `create-react-class`
- `react-native-haptic-feedback`
- `react-native-image-viewing`
- `react-native-languages`
- `react-native-randombytes`
- `react-syntax-highlighter`
- `rn-emoji-keyboard`
- `tdigest`

This saves us some bytes in the bundle size.

## Platforms
- Android
- iOS
2024-04-02 16:32:54 +05:30
Siddarth Kumar a716f4e435
upgrade `react-native` to 0.73.5 (#18563)
fixes #18291

## Summary
Changes worth mentioning are :
- More hacks/patches
- Force app to use `Java 17` everywhere to compile `kotlin,java`
- `gems` were upgraded after a long time
- `aapt2` was bumped to `8.1.1`
- `metro` is now at `0.80.4`
- `xcbeautify` was bumped to `1.4.0`
- `@react-native-community/clipboard` lib was replaced with `@react-native-clipboard/clipboard`
- `react-native-dialogs` lib was upgraded to `1.1.2`
- `react-native-gesture-handler` lib was upgraded to `2.14.1`
- `react-native-navigation` was upgraded to `7.37.2`

## Platforms
- Android
- iOS
2024-03-22 19:51:44 +05:30
Lungu Cristian f8cd14296f
Add Promesa to simplify working with promises (#18767)
* added promesa (clj)

Signed-off-by: Cristian Lungu <lungucristian95@gmail.com>

* ref(resize): using promesa instead of passing cb

Signed-off-by: Cristian Lungu <lungucristian95@gmail.com>

---------

Signed-off-by: Cristian Lungu <lungucristian95@gmail.com>
2024-03-04 13:59:52 +02:00
Siddarth Kumar 2c96c38339
chore: disable hermes and cleanup gradle vars (#18832)
fixes #18831

We update the nix derivation to build android by passing `hermesEnabled` flag which checks the environment variable and if the environment variable is not set we default `hermesEnabled` to `true`.
This ensures that `hermes` is disabled for debug builds and enabled for release builds.

In this commit we also
- rename `nix/mobile/android/release.nix` → `nix/mobile/android/build.nix` since that nix file no longer generates release only builds.
- cleanup 2 other env vars and use the `gradle` project format
- replace `BUILD_NUMBER` with `verisonCode` for consistency
- replace `androidGradleOpts ` with `buildUrl ` 
- bump `status-jenkins-lib` to v1.8.7
2024-02-15 13:48:11 +05:30
Siddarth Kumar 59c07050b2
chore: remove hermes enable condition (#18723)
We recently disabled `hermes` for debug builds here -> https://github.com/status-im/status-mobile/pull/18675
A side effect of that is when we run `make nix-update-gradle` the `hermes` pom gets removed from `deps.list`
This pom is necessary for release builds.
Currently that pom exists in `deps.list` but someone may accidentally remove it when running `make nix-update-gradle`

In this commit we remove the conditional implementation of `hermes` or `jsc` in `build.gradle`
This ensures that the `hermes` pom we need during release builds is not removed from `deps.list`.

I also ran `make nix-update-gradle` just to be sure.
I compared the apk in this commit to other PRs and the size increased by 2MB.
A small price to pay so that the team can run Malli locally without crashing their debug app frequently.

I've added a FIXME comment in the code for when we want to cut back on bundle size later.
2024-02-06 16:57:05 +05:30
Lungu Cristian 901818492d
Replace unmaintained biometrics package (#18531)
* feat: added react-native-biometrics dependency

* chore: added malli schema to auth

* fix: malli schema

* feat: using react-native-biometrics

* fix: removed biometry not-enrolled error supression

* feat: added check for enabled biometric

* fix: biometrics error handling on ios

* chore: remove touch-id library

* chore: cleanup

* removed proj.list dep

* fix: gradle get_projects regex edge-case

Handles cases when the gradle project has a description, which shows up when running `gradle projects` as (`react-native-biometrics` - react-native-biometrics), breaking `make nix-update-gradle`. Here we're just adjusting the regex to ignore everything in the line after the closing (`).

* build: ran "make nix-update-gradle"

* chore: comment typo

* chore: replaced old lib in test mocks

* fix: addressed review comments

* fix: using event for standard-auth biometrics

* ref: using ex-cause for biometric error codes

* fix: removed promesa changes

* fix: auth slide biometric success not triggered
2024-01-29 13:33:46 +02:00
Siddarth Kumar 09bf6673cf
chore: upgrade `kotlinPluginVersion` to `1.9.0` (#18487)
### Summary

We need to bump `kotlin` Plugin version to `1.9.0` because the `nixpkgs` upgrade will set default `gradle` version to `8.4`.
`gradle` version `8.4` comes with a base `kotlin` version of `1.9.0` which becomes incompatible with our existing version of `1.7`

Otherwise we get errors like this :

```
e: /Users/siddarthkumar/code/experiments/status-mobile/node_modules/@react-native/
gradle-plugin/src/main/kotlin/com/facebook/react/utils/TaskUtils.kt: (25, 7): Class
'kotlin.collections.CollectionsKt__CollectionsKt' was compiled with an incompatible version of Kotlin.
The binary version of its metadata is 1.9.0, expected version is 1.7.1.
The class is loaded from /nix/store/3a228ppiiljfvsrxyq15h25chmiwsmbh-gradle-8.4/lib/gradle/lib/
kotlin-stdlib-1.9.10.jar!/kotlin/collections/CollectionsKt__CollectionsKt.class
.
.
.
```

needed for https://github.com/status-im/status-mobile/pull/18321

In this commit we set `kotlinPluginVersion` to `1.9.0` and update `gradle` dependencies.

#### Platforms
- Android
2024-01-16 21:18:15 +05:30
Siddarth Kumar f992f4addd
fix: boost checksum issue due to jfrog (#18434)
I tried doing a clean pod install and was faced with this : 

```
Installing Yoga (1.14.0)
Installing boost (1.76.0)

[!] Error installing boost
Verification checksum was incorrect, expected 
f0397ba6e982c4450f27bf32a2a83292aba035b827a5623a14636ea583318c41, got 
5e89103d9b70bba5c91a794126b169cb67654be2051f90cf7c22ba6893ede0ff
```

related issue in react-native repo : https://github.com/facebook/react-native/issues/42180 

In this commit we patch the pod specs provided by react native to rely on `sourceforge` instead `jfrog` to get boost.
2024-01-08 23:55:36 +05:30
Siddarth Kumar 7a4d79179d
chore: add Kotlin support (#18293)
This commit is a pre-requisite to upgrading `react-native` to `0.73.x`, now that react-native has completely moved their android code over from `Java` to `Kotlin` , it is also necessary for us to begin doing the same.

This commit converts just 2 files which are important at the moment.
- `android/app/src/main/java/im/status/ethereum/MainActivity.java`
- `android/app/src/main/java/im/status/ethereum/MainApplication.java`

I will can convert the remaining files in follow ups.
2023-12-28 20:20:25 +05:30
Icaro Motta 0b4a1545ae
Fix component tests, upgrade Jest & friends, and a few other goodies (#18276)
Fix all component tests after the latest RN upgrade.

Fixes https://github.com/status-im/status-mobile/issues/18157
Closes https://github.com/status-im/status-mobile/pull/18235

Dependency changes

- Upgraded Jest: from 26.6.3 to latest 29.7.0.
- Upgraded @testing-library/jest-native: from 5.3.0 to latest 5.4.3
- Upgraded @testing-library/react-native: from 11.5.4 to 12.4.2
- Removed explicit dependency on jest-circus, this is now the default test
  runner.
- Removed explicit dependency on jest-environment-node. This is handled by the
  package manager.
- Added jest-silent-reporter at version 0.5.0.

### Why component tests were failing?

Many tests were failing because we were using RN Testing Library (RNTL) in an
unreliable fashion. With the recent library upgrades, the unreliability was
excerbated. Other times, the tests were incorrectly arranging data.

### with-redefs does not work with async code

Generally speaking, with-redefs should not be used with async code, assume the
worst. The scope of the macro will cease to exist by the time the async code
runs. In many tests we were using with-redefs, then calling render, but for some
components that use use-effect, JS timers, animations, etc it's unreliable and
were the reason for failures.

It's easy to reproduce too:

```clojure
(defn foo []
  :foo)

(foo)
;; => :foo

(with-redefs [foo (constantly :bar)]
  (foo))
;; => :bar

(js/setTimeout
 (fn []
   (tap> [:calling-foo (foo)]))
 100)
;; Taps [:calling-foo :foo]
;; As you would expect, when running without with-redefs, it prints :foo.

;; So far so good, but whatch what happens with async code:

(with-redefs [foo (constantly :bar)]
  (js/setTimeout
   (fn []
     (tap> [:calling-foo (foo)]))
   100))
;; Taps [:calling-foo :foo]
;; ====> PROBLEM: Taps :foo, not :bar as one might expect
```

### Not waiting on wait-for

When test-helpers.component/wait-for is used, subsequent assertions/etc should
be done after the promise returned by wait-for is resolved. But remember to not
perform side-effects inside the wait-for callback (check out the docs
https://callstack.github.io/react-native-testing-library/docs/api#waitfor).
Most, if not all of our usages of wait-for were not waiting.

#### Improvement 1 - Silence Jest on demand

If you need to re-run component tests frequently, you may want to reduce the
output verbosity. By passing JEST_USE_SILENT_REPORTER=true to make
component-test or make component-test-watch you will see a lot less noise and be
able to focus on what really matters to you.

#### Improvement 2 - Selectively focus/disable tests

Because of our need to first compile CLJS to JS before running tests via Jest,
we couldn't easily skip or focus on specific tests. From this commit onwards, we
should never again have to change the list of requires in files core_spec.cljs.
Commenting out required namespaces gives a bad DX because it causes constant
rebasing issues.

#### Improvement 3 - Translations now work as in prod code (but only English)

Translations performed by *-by-translation-text can be done now without any
workaround under the hood. The query functions are now linted just like
i18n/label, which means static translation keywords must be qualified with :t/,
which is good for consistency.
2023-12-26 11:58:23 -03:00
Siddarth Kumar 761a7df06f
upgrade react-native to 0.72.5 (#17241)
This commit does many things :
- Upgrade `react-native ` to `0.72.5`
- Upgrade `react-native-reanimated` to  `3.5.4`
- Upgrade `react-native-navigation` to `7.37.0`
- `ndkVersion` has been bumped to `25.2.9519653`
- `cmakeVersion` has been bumped to `3.22.1`
- `kotlinVersion` has been bumped to `1.7.22`
- `AGP` has been bumped to `7.4.2`
- `Gradle` has been upgraded to `8.0.1`
- Android `CompileSDK` and `TargetSDK` have been bumped to 33
- `@react-native-async-storage/async-storage` has been upgraded to `1.19.3`
- `@walletconnect/client` has been nuked
- some of the old `react-native-reanimated` code has been nuked
- `react-native-keychain` fork has been replaced with `8.1.2`

- On Android we are currently relying on `Hermes` Engine.
- On iOS we are currently relying on `JSC`
- We are not enabling new architecture for now (I have plans for that in the future) ref: https://github.com/status-im/status-mobile/issues/18138

IOS only PR : https://github.com/status-im/status-mobile/pull/16721
Android only PR : https://github.com/status-im/status-mobile/pull/17062

- `make run-metro` now has a target of `android` which was `clojure` earlier, this will increase the time it takes to start metro terminal but this is needed otherwise you will get a nasty error while developing for android locally.
2023-12-11 21:22:23 +05:30
Siddarth Kumar 3ad345519b
nix: bump clang to 15 & patch Glog for CC,CXX flag (#18108)
After upgrading MacOS to Sonoma and Xcode to 15, pod install stage would fail with clang errors.
Turns out that react-native's configure glog script sets 2 additional flags, CC and CXX which conflicts with flags already set in nix iOS shell.

In this commit we :

- bump clang from 10.0.0 to 15.0.7
- patch glog configure script to avoid setting those flags

This fixes the iOS builds.
2023-12-07 15:36:08 +05:30
Icaro Motta 563f1c588d
Improve test failure readability (#18049)
Problem: failed equality checks as in "(is (= expected actual))" will give a
single, long line of output that for anything but the simplest data structures
is unreadable by humans, and the output doesn't give a useful diff.

Solution: use library https://github.com/nubank/matcher-combinators and its test
directive "match?" which will pinpoint where two data structures differ. Then,
instead of "(is (= ...", use "(is (match? expected actual)". It works
beautifully.

The library offers other nice matchers, but the majority of the time match? is
sufficient.

Can we use another test runner like Kaocha? kaocha-cljs2
(https://github.com/lambdaisland/kaocha-cljs2) would be able to print better
test errors out of the box, among other features, but I have no clue if it would
work well or at all in our stack (in theory yes, but it's a larger piece of
work).
2023-12-05 17:20:54 -03:00
Icaro Motta c1dcd7a764
Introduce malli library (#17867)
This commit is the foundational step to start using malli
(https://github.com/metosin/malli) in this project.

Take in consideration we will only be able to realize malli's full power in
future iterations.

For those without context: the mobile team watched a presentation about malli
and went through a light RFC to put everyone on the same page, among other
discussions here and there in PRs.

To keep things relatively short:

1. Unit, integration and component tests will short-circuit (fail) when
   inputs/outputs don't conform to their respective function schemas (CI should
   fail too).
2. Failed schema checks will not block the app from initializing, nor throw an
   exception that would trigger the LogBox. Exceptions are only thrown in the
   scope of automated tests.
3. There's zero performance impact in production code because we only
   instrument. Instrumentation is removed from the compiled code due to the
   usage of "^boolean js.goog/DEBUG".
4. We shouldn't expect any meaningful slowdown during development.

**What are we instrumenting in this PR?**

Per our team's agreement, we're only instrumenting the bare minimum to showcase 2 examples.

- Instrument a utility function utils.money/format-amount using the macro
  approach.
- Instrument a quo component quo.components.counter.step.view/view using the
  functional approach.

Both approaches are useful, the functional approach is powerful and allow us to
instrument anonymous functions, like the ones we pass to subscriptions or event
handlers, or the higher-order function quo.theme/with-theme. The macro approach
is perfect for functions already defined with defn.

**I evaluated the schema or function in the REPL but nothing changes**

- If you evaluate the source function, you need to evaluate schema/=> or
  schema/instrument as well.
- Remember to *var quote* when using schema/instrument.
- You must call "(status-im2.setup.schema/setup!)" after any var is
  re-instrumented. It's advisable to add a keybinding in your editor to send
  this expression automatically to the CLJS REPL, or add the call at the end of
  the namespace you are working on (similar to how some devs add "(run-tests)"
  at the end of test namespaces).

**Where should schemas be defined?**

For the moment, we should focus on instrumenting quo components, so define each
function schema in the same namespace as the component's public "view" var.

To be specific:

- A schema used only to instrument a single function and not used elsewhere,
  like a quo component schema, wouldn't benefit from being defined in a separate
  namespace because that would force the developer to constantly open two files
  instead of one to check function signatures.
- A common schema reused across the repo, like ":schema.common/theme" should be
  registered in the global registry "schema.registry" so that consumers can just
  refer to it by keyword, as if it was a built-in malli schema.
- A common schema describing status-go entities like message, notification,
  community, etc can be stored either in the respective
  "src/status_im2/contexts/*" or registered globally, or even somewhere else.
  This is yet to be defined, but since I chose not to include schemas for them,
  we can postpone this guideline.
2023-11-18 11:04:48 -03:00
Ibrahem Khalil b910f05286
Update `react-native-camera-kit` to latest beta to enable programmitcal zooming (#17708) 2023-10-24 11:48:36 +03:00
Icaro Motta ca6fd3df66
Upgrade Clojure libraries (#17690)
Upgrades and cleans up all production Clojure dependencies and 1 dev-only
dependency (com.taoensso/tufte).

- Remove warning "WARNING: update-keys already refers to:
  #'clojure.core/update-keys in namespace: io.aviso.exception"
- Remove hickory and mvxcvi/alphabase dependencies they are not used.
- Upgrade com.taoensso/tufte from 2.1.0 to 2.6.3
- Upgrade transit-cljs from 0.8.248 to 0.8.280
- Upgrade cljs-bean from 1.3.0 to 1.9.0
- Remove workaround for com.taoensso/timbre in shadow-cljs.edn
- Upgrade com.taoensso/timbre from 4.10 (Status fork) to 6.3.1
2023-10-20 20:47:23 -03:00
Jakub Sokołowski 2df7a7cf6d
nix: do not exclude module files from Gradle deps
This is necessary for the React Native `0.72.5` build to work.
https://github.com/status-im/status-mobile/pull/17241

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-10-19 14:06:39 +02:00
Jakub Sokołowski d01c337a2c
nix: update Clojure dependencies to remove POMs
Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-10-13 15:23:42 +02:00
Jakub Sokołowski d1442b306a
nix: stop downloading POMs for Clojure dependencies
Clojure dependencies require only JARs to work. Downloading POMs is both
a waste of time, space, and bandwidth. In addition POMs create edge
cases that we would have to handle, an would rather avoid.

For example, the `guice` package which shows up in the classpath
includes a JAR named `guice-4.2.2-no_aop.jar`. The issue with that is
that there is no corresponding POM in the directory:
https://repo1.maven.org/maven2/com/google/inject/guice/4.2.2/

Either we have to make a special case for such packages, or we can just
skip POMs entirely and avoid the mess.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-10-13 15:23:41 +02:00
Icaro Motta 7f960f9be5
Add custom linter for i18n/label translation keywords (#17610)
This commit adds a custom linter to verify i18n/label is called with a qualified
keyword, like :t/foo. More sophisticated linters are possible too.

We also set the stage for other developers to consider more lint automation
instead of manually reviewing conventions in PRs.

If you want to understand how to write custom linters, check out
https://github.com/clj-kondo/clj-kondo/blob/master/doc/hooks.md. You can fire
the Clojure JVM REPL in status-mobile and play with the clj-kondo hook too, it
works beautifully.

Why do we care? By making sure all translation keywords are qualified with "t",
it is trivial to grep or replace them because they're unique in the repo, and
can't be confused with other words if you search by ":t/<something>".

Note: It's a best practice to commit clj-kondo configuration from external
libraries in the .clj-kondo directory. The directory .clj-kondo/babashka is
auto-generated, that's why it was added.
2023-10-11 18:53:34 -03:00
Andrea Maria Piana 155f57ca6b
Dont parse unused identicon 2023-09-06 14:09:37 +01:00
Jakub Sokołowski f433956657
nix: refresh Gradle dependenncies using new setup
Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-09-04 09:58:21 +02:00
Jakub Sokołowski 83f622d349
nix: make fetching Gradle dependencies more generic
Before what we did was essentially guess what files might exist for any
given package. This approach mostly works, but not entirely.
This is especially problematic when dealing with weird edge case
packages like `react-native`, which you can read about here:

https://github.com/react-native-community/discussions-and-proposals/pull/508
https://github.com/react-native-community/discussions-and-proposals/blob/4a06fc64/proposals/0508-out-of-npm-artifacts.md#the-react-native-android-archive

In order to avoid as much the guessing aspect of fetching Gradle
dependencies we are using both HTML listsings of files and
`artifact-metadata.json` files that exist for more recent packages.

This way we can avoid having to add special edge cases that have been
found out when working on React Native 72 upgrade in:
https://github.com/status-im/status-mobile/pull/17062

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-09-04 09:57:53 +02:00
Mohamed Javid 162f02ea27
Implement `gradient cover` component (#16778)
This commit implements the "gradient cover" component which is needed for wallet screen development, and upgrades the "react-native-linear-gradient" library to "v2.8.0".

Signed-off-by: Mohamed Javid <19339952+smohamedjavid@users.noreply.github.com>
2023-07-31 12:49:34 +05:30
Icaro Motta b9890a9d44
Upgrade shadow-cljs and ClojureScript (#15417)
This commit upgrades Shadow CLJS from 2.11.16 (released on Feb/21) to latest
2.25.0 (Jul/23), so ~1.5 years worth of upgrades. By upgrading shadow we
can finally use the latest major Clojure version 1.11.x.

Why upgrade shadow?

- Shadow CLJS controls the ClojureScript version we can use. In order to use the
  latest major Clojure version we must upgrade Shadow CLJS.

- Shadow CLJS releases new versions very frequently, and if you take a look at
  its changelog https://github.com/thheller/shadow-cljs/blob/master/CHANGELOG.md, you'll see
  it had tons and tons of bug fixes over the years. I hope some of them help
  improve the DX for certain contributors who recently reported issues with
  it.

- Clojure 1.11 brings new features, bug fixes and even performance improvements
  (although I think the performance mostly impacts Clojure on the JVM). See the
  changelog https://github.com/clojure/clojure/blob/master/changes.md#changes-to-clojure-in-version-1110

Things that can be beneficial to us, or are interesting nonetheless:

- New :as-alias to be used in require, which is like :as but does not require
  the namespace to load. This means namespaced keywords using :as-alias can't
  cause circular dependency errors. This feature would very useful if we used
  namespaced keywords, but we don't, so...
  https://github.com/clojure/clojure/blob/master/changes.md#22-as-alias-in-require
- New macros run-test and run-test-var to run single test with fixtures and
  report.
- New iteration function, useful for processing paginated data.
  https://www.abhinavomprakash.com/posts/clojure-iteration/
- New update-keys function: applies a function to every key in a map.
- New update-vals function: applies a function to every value in a map.

Examples for update-vals and update-keys. They should perform better than the
common reduce-kv approach since they use a transient data structure.

    (let [m {:a 1 :b 2}]
      (update-vals m inc)) ; => {:a 2, :b 3}
    
    (let [m {:a 1 :b 2}]
      (update-keys m name)) ; => {"a" 1, "b" 2}

Why change namespaces within __tests__ directories?

Any namespace with the word --tests-- throws an error, like the one below. I
didn't bother investigating why, so I changed the guidelines to reflect the new
convention. It's probably related to the double dashes in the name.

    Namespace quo2.components.dividers.--tests--.divider-label-component-spec has a
    segment starting with an invalid JavaScript identifier at line 1
2023-07-28 13:40:54 -03:00
Jakub Sokołowski 33b2e12e3b
android: fix Gradle deps, drop Flipper, upgrade Fresco
There are a few fixes here:

* Changes format of Gradle deps to `:buildEnvironment` and `:dependencies`:
    ```
    Cannot locate tasks that match '::buildEnvironment'. The path should not include an empty segment (try ':buildEnvironment' instead).
    ```
* Fix for GNU Parallel tool to use stdin for list of arguments:
    ```
    nix/deps/gradle/generate.sh: line 55: parallel: Argument list too long
    ```
* Update of Facebook Fresco dependencies from `2.2.0` to `2.5.0` to fix:
    ```
     > echo com.facebook.fresco:animated-gif:2.2.0 | ./go-maven-resolver > /dev/null
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:imagepipeline-native:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:memory-type-native:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:imagepipeline:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:drawee:2.2.0 O=false S=runtime >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:memory-type-java:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:fbcore:2.2.0 O=false S=runtime >
    ```
* Remove Flipper to avoid pulling in Fresco `2.2.0` versions:
    ```
    +--- com.facebook.flipper:flipper-fresco-plugin:0.54.0
    |    +--- com.facebook.fresco:fresco:2.2.0 -> 2.5.0
    |    +--- com.facebook.fresco🐬2.2.0
    |    \--- com.facebook.fresco:stetho:2.2.0
    ```

Thanks for help from Sidarth.

Resolves: https://github.com/status-im/status-mobile/issues/16367

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-23 12:02:18 +02:00
Mohamed Javid b397411daa
Upgrade `react-native-camera-kit` library to resolve camera issues in Sign In screen (#16248)
Signed-off-by: Mohamed Javid <19339952+smohamedjavid@users.noreply.github.com>
2023-06-20 18:50:05 +05:30
Jamie Caprani 2cbc94320d
feat: add parallax component (#16277) 2023-06-16 03:09:10 -07:00
Siddarth Kumar 350303256b
upgrade `react-native` from 0.67.5 to 0.69.10 (#16016) 2023-06-14 07:17:41 +05:30
flexsurfer fb4d484d7d
bump reagent 1.2.0 (#16070) 2023-05-31 13:35:31 +02:00
Icaro Motta 9dad4716d6
Upgrade re-frame (#15997)
This commit upgrades re-frame to v1.3.0 (latest stable release), released ~9
months ago, in 2022-08-27. This is a solid upgrade, with no breaking changes as
far as I tested status-mobile. It's a great testament of re-frame's stability
and commitment to backwards compatibility, as are many Clojure libs.

Fixes https://github.com/status-im/status-mobile/issues/15963

The big, and truly relevant addition is the introduction of the :fx built-in
effect that was added ~3 years ago in Aug/2020 in v1.1.0.

Relevant changelog:

- Global interceptors are now supported (added in v1.0.0).
- reg-event-fx will just warn (not generate an error) if the effect map returned
  contains an unknown effect key.
- re-frame will now warn us when we are calling subscribe outside of a reactive
  context.
- "re-frame now guarantees that a :db effect, if present, will be actioned
  before any other sibling effects. re-frame continues to provide NO guarantees
  about the order in which other effects will be actioned."
  (https://day8.github.io/re-frame/releases/2020/#110-2020-08-24)
- There's syntactic sugar for trivial reg-sub declarations (added in v1.3.0).
  See the documentation for reg-sub for more details
  https://day8.github.io/re-frame/api-re-frame.core/#reg-sub
- "The built-in effect :dispatch-later can now take a single map value.
  Supplying a sequence of maps is now deprecated in favor of using multiple
  :dispatch-later effects within the new :fx effect."
  https://day8.github.io/re-frame/releases/2020/#111-2020-08-26
2023-05-31 06:08:34 -03:00
Jakub Sokołowski ac3eb3e660
nix: use SRI hashes for Gradle dependencies
This way we will use the same format as Nix logs and errors when a hash
changes, which avoids confusion.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-05-10 15:45:32 +02:00
Ajay Sivan 1aff364595
fix: android blur view hash mismatch in some locations 2023-05-09 21:36:12 +02:00
Jakub Sokołowski b7a138118a
nix: update Gradle dependencies
Contains changes that should have been included in:
https://github.com/status-im/status-mobile/pull/15713

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-05-08 16:22:18 +02:00
Jakub Sokołowski f03e11c877
nix: fix handling POMs without JARs
Otherwise we can get a failure like this:
```
Regenerating Nix files...
Found 40 sub-projects...
Found 609 direct dependencies...
Found 889 dependency URLs...
 ! Failed to fetch: https://repo.maven.apache.org/maven2/org/ow2/asm/asm-bom/9.5/asm-bom-9.5.jar
```
When using `make nix-update-gradle`.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-05-08 15:48:19 +02:00
Siddarth Kumar 8bf5abdf3d
patch react-native script to not look for `nvm` (#15681) 2023-04-18 22:16:12 +05:30
Siddarth Kumar 3bd4038089
Upgrade `react-native` from 0.63.3 to 0.67.5 (#15486)
* [IOS Only] react-native 0.63 to 0.67

* [Android Only] react-native 0.63 to 0.67

* bring back all the jenkinsfiles

* make auto-complete prop for text-input compatible

* [IOS Only] react-native 0.63 to 0.67

* [Android Only] react-native 0.63 to 0.67

* bring back all the jenkinsfiles

* nix: drop unnecessary set -x from status-go build

Signed-off-by: Jakub Sokołowski <jakub@status.im>

* add explicity implementation line for soloader

And add deleteDebugFilesForVariant fix for libhermes.

Signed-off-by: Jakub Sokołowski <jakub@status.im>

* use fast-image for link previews

* fix extra line in message composer on android

This elevation prop is un-necessary and causes an extra line to appear which looks like a border but its actually a shadow.

* don't use `fast-image` for url preview favicon

* fix audio record button interfering cancel android

This fix was not needed in react-native 0.63.4 but is needed after we upgraded to 0.67.5

* get rid of unused platform import

---------
Co-authored-by: Jakub Sokołowski <jakub@status.im>
2023-04-12 15:25:19 +05:30
Alexander 5be2cd949b
Patch react-native/Yoga to make it possible to build an app using Xcode 14.3 (#15589)
* Patch react-native/Yoga to make it possible to build an app using Xcode 14.3

* Update

* Update

* Comment update

* Comment update
2023-04-06 12:20:36 +02:00
Jakub Sokołowski d71cfd12c1
nix: unpatched Node modules for Gradle deps update
Otherwise we can end up with Gradle failing to find the dependencies
because we've patched away all entries referencing external repos.

Also made the regex in AWS parser a but more strict.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-21 15:21:58 +01:00
Brian Sztamfater 74da82c61a
feat: implement new splash screen static version
Signed-off-by: Brian Sztamfater <brian@status.im>
2023-03-16 12:57:32 -03:00