Commit Graph

442 Commits

Author SHA1 Message Date
Siddarth Kumar 761a7df06f
upgrade react-native to 0.72.5 (#17241)
This commit does many things :
- Upgrade `react-native ` to `0.72.5`
- Upgrade `react-native-reanimated` to  `3.5.4`
- Upgrade `react-native-navigation` to `7.37.0`
- `ndkVersion` has been bumped to `25.2.9519653`
- `cmakeVersion` has been bumped to `3.22.1`
- `kotlinVersion` has been bumped to `1.7.22`
- `AGP` has been bumped to `7.4.2`
- `Gradle` has been upgraded to `8.0.1`
- Android `CompileSDK` and `TargetSDK` have been bumped to 33
- `@react-native-async-storage/async-storage` has been upgraded to `1.19.3`
- `@walletconnect/client` has been nuked
- some of the old `react-native-reanimated` code has been nuked
- `react-native-keychain` fork has been replaced with `8.1.2`

- On Android we are currently relying on `Hermes` Engine.
- On iOS we are currently relying on `JSC`
- We are not enabling new architecture for now (I have plans for that in the future) ref: https://github.com/status-im/status-mobile/issues/18138

IOS only PR : https://github.com/status-im/status-mobile/pull/16721
Android only PR : https://github.com/status-im/status-mobile/pull/17062

- `make run-metro` now has a target of `android` which was `clojure` earlier, this will increase the time it takes to start metro terminal but this is needed otherwise you will get a nasty error while developing for android locally.
2023-12-11 21:22:23 +05:30
Siddarth Kumar 3ad345519b
nix: bump clang to 15 & patch Glog for CC,CXX flag (#18108)
After upgrading MacOS to Sonoma and Xcode to 15, pod install stage would fail with clang errors.
Turns out that react-native's configure glog script sets 2 additional flags, CC and CXX which conflicts with flags already set in nix iOS shell.

In this commit we :

- bump clang from 10.0.0 to 15.0.7
- patch glog configure script to avoid setting those flags

This fixes the iOS builds.
2023-12-07 15:36:08 +05:30
Icaro Motta 563f1c588d
Improve test failure readability (#18049)
Problem: failed equality checks as in "(is (= expected actual))" will give a
single, long line of output that for anything but the simplest data structures
is unreadable by humans, and the output doesn't give a useful diff.

Solution: use library https://github.com/nubank/matcher-combinators and its test
directive "match?" which will pinpoint where two data structures differ. Then,
instead of "(is (= ...", use "(is (match? expected actual)". It works
beautifully.

The library offers other nice matchers, but the majority of the time match? is
sufficient.

Can we use another test runner like Kaocha? kaocha-cljs2
(https://github.com/lambdaisland/kaocha-cljs2) would be able to print better
test errors out of the box, among other features, but I have no clue if it would
work well or at all in our stack (in theory yes, but it's a larger piece of
work).
2023-12-05 17:20:54 -03:00
Icaro Motta c1dcd7a764
Introduce malli library (#17867)
This commit is the foundational step to start using malli
(https://github.com/metosin/malli) in this project.

Take in consideration we will only be able to realize malli's full power in
future iterations.

For those without context: the mobile team watched a presentation about malli
and went through a light RFC to put everyone on the same page, among other
discussions here and there in PRs.

To keep things relatively short:

1. Unit, integration and component tests will short-circuit (fail) when
   inputs/outputs don't conform to their respective function schemas (CI should
   fail too).
2. Failed schema checks will not block the app from initializing, nor throw an
   exception that would trigger the LogBox. Exceptions are only thrown in the
   scope of automated tests.
3. There's zero performance impact in production code because we only
   instrument. Instrumentation is removed from the compiled code due to the
   usage of "^boolean js.goog/DEBUG".
4. We shouldn't expect any meaningful slowdown during development.

**What are we instrumenting in this PR?**

Per our team's agreement, we're only instrumenting the bare minimum to showcase 2 examples.

- Instrument a utility function utils.money/format-amount using the macro
  approach.
- Instrument a quo component quo.components.counter.step.view/view using the
  functional approach.

Both approaches are useful, the functional approach is powerful and allow us to
instrument anonymous functions, like the ones we pass to subscriptions or event
handlers, or the higher-order function quo.theme/with-theme. The macro approach
is perfect for functions already defined with defn.

**I evaluated the schema or function in the REPL but nothing changes**

- If you evaluate the source function, you need to evaluate schema/=> or
  schema/instrument as well.
- Remember to *var quote* when using schema/instrument.
- You must call "(status-im2.setup.schema/setup!)" after any var is
  re-instrumented. It's advisable to add a keybinding in your editor to send
  this expression automatically to the CLJS REPL, or add the call at the end of
  the namespace you are working on (similar to how some devs add "(run-tests)"
  at the end of test namespaces).

**Where should schemas be defined?**

For the moment, we should focus on instrumenting quo components, so define each
function schema in the same namespace as the component's public "view" var.

To be specific:

- A schema used only to instrument a single function and not used elsewhere,
  like a quo component schema, wouldn't benefit from being defined in a separate
  namespace because that would force the developer to constantly open two files
  instead of one to check function signatures.
- A common schema reused across the repo, like ":schema.common/theme" should be
  registered in the global registry "schema.registry" so that consumers can just
  refer to it by keyword, as if it was a built-in malli schema.
- A common schema describing status-go entities like message, notification,
  community, etc can be stored either in the respective
  "src/status_im2/contexts/*" or registered globally, or even somewhere else.
  This is yet to be defined, but since I chose not to include schemas for them,
  we can postpone this guideline.
2023-11-18 11:04:48 -03:00
Icaro Motta 17ebedd6b8
Fix: resolve our Clojure source dependencies first in the classpath (#17919)
In PR https://github.com/status-im/status-mobile/pull/17867 we have a namespace
named schema.core, but this namespace is taken by library prismatic/schema
already (see https://github.com/plumatic/schema/tree/master/src/cljc/schema), a
library used by our direct dependency on bidi 2.1.6. This leads to a broken
build where the ClojureScript compiler reports undeclared vars
(https://clojurescript.org/reference/compiler-options#warnings).

We change the order Java resolves dependencies via the classpath mechanism. We
now first resolve our own Clojure sources, and then project dependencies.
2023-11-18 08:50:11 -03:00
Dmitri Akatov a5bb95cd18
add translation linting to the "make lint" pipeline. (#17820) 2023-11-07 11:33:59 +01:00
yqrashawn 701df811b0
feat: lint direct require quo component outside src/quo (#17828) 2023-11-07 10:21:58 +08:00
Ibrahem Khalil b910f05286
Update `react-native-camera-kit` to latest beta to enable programmitcal zooming (#17708) 2023-10-24 11:48:36 +03:00
Icaro Motta ca6fd3df66
Upgrade Clojure libraries (#17690)
Upgrades and cleans up all production Clojure dependencies and 1 dev-only
dependency (com.taoensso/tufte).

- Remove warning "WARNING: update-keys already refers to:
  #'clojure.core/update-keys in namespace: io.aviso.exception"
- Remove hickory and mvxcvi/alphabase dependencies they are not used.
- Upgrade com.taoensso/tufte from 2.1.0 to 2.6.3
- Upgrade transit-cljs from 0.8.248 to 0.8.280
- Upgrade cljs-bean from 1.3.0 to 1.9.0
- Remove workaround for com.taoensso/timbre in shadow-cljs.edn
- Upgrade com.taoensso/timbre from 4.10 (Status fork) to 6.3.1
2023-10-20 20:47:23 -03:00
Jakub Sokołowski 2df7a7cf6d
nix: do not exclude module files from Gradle deps
This is necessary for the React Native `0.72.5` build to work.
https://github.com/status-im/status-mobile/pull/17241

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-10-19 14:06:39 +02:00
yqrashawn 4c2ae2338a
chore: add lsp clean-ns in lint-fix (#17661) 2023-10-18 00:17:43 +08:00
Jakub Sokołowski 6bbe930425
nix: pin Ruby at 3.1, fastlane shell for nix-update-gems
Since the `default` shell doesn't have Ruby, the `nix-update-gems`
target would incorrectly use the system Ruby instead of the one from Nix.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-10-17 16:59:49 +02:00
Jakub Sokołowski d01c337a2c
nix: update Clojure dependencies to remove POMs
Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-10-13 15:23:42 +02:00
Jakub Sokołowski d1442b306a
nix: stop downloading POMs for Clojure dependencies
Clojure dependencies require only JARs to work. Downloading POMs is both
a waste of time, space, and bandwidth. In addition POMs create edge
cases that we would have to handle, an would rather avoid.

For example, the `guice` package which shows up in the classpath
includes a JAR named `guice-4.2.2-no_aop.jar`. The issue with that is
that there is no corresponding POM in the directory:
https://repo1.maven.org/maven2/com/google/inject/guice/4.2.2/

Either we have to make a special case for such packages, or we can just
skip POMs entirely and avoid the mess.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-10-13 15:23:41 +02:00
Icaro Motta 7f960f9be5
Add custom linter for i18n/label translation keywords (#17610)
This commit adds a custom linter to verify i18n/label is called with a qualified
keyword, like :t/foo. More sophisticated linters are possible too.

We also set the stage for other developers to consider more lint automation
instead of manually reviewing conventions in PRs.

If you want to understand how to write custom linters, check out
https://github.com/clj-kondo/clj-kondo/blob/master/doc/hooks.md. You can fire
the Clojure JVM REPL in status-mobile and play with the clj-kondo hook too, it
works beautifully.

Why do we care? By making sure all translation keywords are qualified with "t",
it is trivial to grep or replace them because they're unique in the repo, and
can't be confused with other words if you search by ":t/<something>".

Note: It's a best practice to commit clj-kondo configuration from external
libraries in the .clj-kondo directory. The directory .clj-kondo/babashka is
auto-generated, that's why it was added.
2023-10-11 18:53:34 -03:00
Icaro Motta b73ac6b107
Upgrade clj-kondo and configure new linters (#17543)
- Upgrade clj-kondo to latest version to take advantage of new linters. From
  version 2023.04.14
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230414 to
  2023.09.07
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230907
- Use new linter ":unused-alias" and set at WARN level for the moment, because
  otherwise the PR would increase a bit too much, but it did catch many unused
  "require" aliases. Added in version 2023.09.07
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230907
- Use new linter ":case-symbol-test" and fix the reported errors, added in
  version 2023.07.13
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230713
- Use new linters ":equals-true", ":plus-one", and ":minus-one" and fix reported
  errors, added in version 2023.05.18
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230518
- Raise level from WARN to ERROR for linter "uninitialized-var".
- Explicitly add ":case-duplicate-test" to clj-kondo config, renamed in version
  2023.07.13
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230713
- Explicitly add ":case-quoted-test" to clj-kondo config, renamed in version
  2023.07.13
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230713
- Explicitly add ":deprecated-namespace" to clj-kondo config, added in version
  2023.07.13
  https://github.com/clj-kondo/clj-kondo/blob/master/CHANGELOG.md#20230713

Fixes https://github.com/status-im/status-mobile/issues/17287
2023-10-05 15:50:57 -03:00
Vitaliy Vlasov fbe30d7b18
Update status-go to v0.167.6
b3213172...e1354016
Signed-off-by: Vitaliy Vlasov <siphiuel@protonmail.com>
2023-10-04 01:16:25 +03:00
Anton Iakimov b7a090716d
nix: set ios status-go targets 2023-09-07 14:15:30 +02:00
Andrea Maria Piana 155f57ca6b
Dont parse unused identicon 2023-09-06 14:09:37 +01:00
Jakub Sokołowski f433956657
nix: refresh Gradle dependenncies using new setup
Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-09-04 09:58:21 +02:00
Jakub Sokołowski 83f622d349
nix: make fetching Gradle dependencies more generic
Before what we did was essentially guess what files might exist for any
given package. This approach mostly works, but not entirely.
This is especially problematic when dealing with weird edge case
packages like `react-native`, which you can read about here:

https://github.com/react-native-community/discussions-and-proposals/pull/508
https://github.com/react-native-community/discussions-and-proposals/blob/4a06fc64/proposals/0508-out-of-npm-artifacts.md#the-react-native-android-archive

In order to avoid as much the guessing aspect of fetching Gradle
dependencies we are using both HTML listsings of files and
`artifact-metadata.json` files that exist for more recent packages.

This way we can avoid having to add special edge cases that have been
found out when working on React Native 72 upgrade in:
https://github.com/status-im/status-mobile/pull/17062

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-09-04 09:57:53 +02:00
Anton Iakimov 34f7a48503 nix: map android arch to status-go builds
Fixes partially #15595
In order to build less targets, when not needed we introduce this
mapping logic.
If only specific ABI is required - status-go will have the same
arhitecuture.
2023-08-23 12:15:05 +03:00
Anton Iakimov d5c1ecc104
nix: switch status-im config to env vars, cleanup
To help with #15595 changes, refactoring is required.
In this PR we switch from config to env vars.
Doing some cleanup meanwhile.
2023-08-07 14:50:36 +02:00
Mohamed Javid 162f02ea27
Implement `gradient cover` component (#16778)
This commit implements the "gradient cover" component which is needed for wallet screen development, and upgrades the "react-native-linear-gradient" library to "v2.8.0".

Signed-off-by: Mohamed Javid <19339952+smohamedjavid@users.noreply.github.com>
2023-07-31 12:49:34 +05:30
Icaro Motta b9890a9d44
Upgrade shadow-cljs and ClojureScript (#15417)
This commit upgrades Shadow CLJS from 2.11.16 (released on Feb/21) to latest
2.25.0 (Jul/23), so ~1.5 years worth of upgrades. By upgrading shadow we
can finally use the latest major Clojure version 1.11.x.

Why upgrade shadow?

- Shadow CLJS controls the ClojureScript version we can use. In order to use the
  latest major Clojure version we must upgrade Shadow CLJS.

- Shadow CLJS releases new versions very frequently, and if you take a look at
  its changelog https://github.com/thheller/shadow-cljs/blob/master/CHANGELOG.md, you'll see
  it had tons and tons of bug fixes over the years. I hope some of them help
  improve the DX for certain contributors who recently reported issues with
  it.

- Clojure 1.11 brings new features, bug fixes and even performance improvements
  (although I think the performance mostly impacts Clojure on the JVM). See the
  changelog https://github.com/clojure/clojure/blob/master/changes.md#changes-to-clojure-in-version-1110

Things that can be beneficial to us, or are interesting nonetheless:

- New :as-alias to be used in require, which is like :as but does not require
  the namespace to load. This means namespaced keywords using :as-alias can't
  cause circular dependency errors. This feature would very useful if we used
  namespaced keywords, but we don't, so...
  https://github.com/clojure/clojure/blob/master/changes.md#22-as-alias-in-require
- New macros run-test and run-test-var to run single test with fixtures and
  report.
- New iteration function, useful for processing paginated data.
  https://www.abhinavomprakash.com/posts/clojure-iteration/
- New update-keys function: applies a function to every key in a map.
- New update-vals function: applies a function to every value in a map.

Examples for update-vals and update-keys. They should perform better than the
common reduce-kv approach since they use a transient data structure.

    (let [m {:a 1 :b 2}]
      (update-vals m inc)) ; => {:a 2, :b 3}
    
    (let [m {:a 1 :b 2}]
      (update-keys m name)) ; => {"a" 1, "b" 2}

Why change namespaces within __tests__ directories?

Any namespace with the word --tests-- throws an error, like the one below. I
didn't bother investigating why, so I changed the guidelines to reflect the new
convention. It's probably related to the double dashes in the name.

    Namespace quo2.components.dividers.--tests--.divider-label-component-spec has a
    segment starting with an invalid JavaScript identifier at line 1
2023-07-28 13:40:54 -03:00
Anton Iakimov 07d037f2e1
nix: downgrade watchman to 4.9.0
watchman was upgraded significantly during the last #14944 (4.9.0 (Aug 16, 2017) to 2023.01.30.00 - 6 years between):
status-im/nixpkgs@4e9c02b

Probably causing developers to have "too many files open" issue #16341

This PR is an attempt to fix the issue by downgrading the watchman

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-07-02 08:46:28 +02:00
Jakub Sokołowski 1503f6b250
nix: use Darwin stat command explicitly
Otherwise if in Nix context we can accidentally use GNU stat which
results in a different output due to different command line flags:
```
[nix-shell:~/status-mobile]$ stat -Lf "%Sg" "/nix/store"
stat: cannot read file system information for '%Sg': No such file or directory
  File: "/nix/store"
    ID: 10000110000001a Namelen: ?       Type: apfs
Block size: 4096       Fundamental block size: 4096
Blocks: Total: 242837545  Free: 199242283  Available: 199242283
Inodes: Total: 7971454780 Free: 7969691320
```
And it should be just owner group name or ID. Which in turn results in:
```
Unknown Nix installtion type!
```

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-27 13:25:41 +02:00
Anton Iakimov 5dcd64c478
nix: fix Android SDK on Darwin with nixpkgs system override
Android SDK in nixpkg doesn't support `aarch64-darwin`, for details see
https://github.com/status-im/status-mobile/issues/12794

The workaround was to run terminal application with Rosetta or make with `aarch` tool.

This PR overrides system architecture to always be `x86_64` for Android shell and build targets ran by make.
CI is not affected as it runs `nix` directly.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-26 17:33:44 +02:00
Siddarth Kumar 1c50dc7067
nix: skip git-lfs checks failing on darwin
On macOS `git-lfs` checks fail sometimes and they also take a lot of time to execute.

```log
FAIL    github.com/git-lfs/git-lfs/v3/lfshttp   0.820s
FAIL
error: builder for '/nix/store/abd6spw876qvcmlpcwsljsnbpbnvx1fg-git-lfs-3.3.0.drv' failed with exit code 1;
       last 10 log lines:
       >          Error Trace:    certs_test.go:210
       >              Error:          Expected value not to be nil.
       >          Test:           TestCertFromSSLCAPathEnv
       >     certs_test.go:210:
       >               Error Trace:    certs_test.go:210
       >              Error:          Expected value not to be nil.
       >          Test:           TestCertFromSSLCAPathEnv
       > FAIL
       > FAIL    github.com/git-lfs/git-lfs/v3/lfshttp   0.820s
       > FAIL
       For full logs, run 'nix-store -l /nix/store/abd6spw876qvcmlpcwsljsnbpbnvx1fg-git-lfs-3.3.0.drv'.
```
Failures initially observed by me and @smohamedjavid and then today again reported by @yqrashawn

This commit adds a `nix` overlay that skips those checks
2023-06-26 10:49:32 +02:00
Ibrahem 125d3239de
nix: build derivation from sources if cache fails
This is a workaround for a well known issue of Nix failing to download
bigger packages from Nix cache due to errors like this:
```
HTTP error 200 (curl error: Transferred a partial file)
```
or
```
HTTP error 200 (curl error: Stream error in the HTTP/2 framing layer)
```
From docs: https://nixos.org/manual/nix/stable/command-ref/conf-file.html#conf-fallback

>If set to true, Nix will fall back to building from source if a binary
>substitute fails. This is equivalent to the --fallback flag. The default is false.

Realted: https://github.com/status-im/infra-ci/issues/17

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-25 23:34:59 +02:00
Anton Iakimov 7e56e35f56
nix: add missing Apple SDKs to fix make test on macOS
Fixes following error:
```
ld: framework not found IOKit
clang-11: error: linker command failed with exit code 1 (use -v to see invocation)
make[1]: *** [status_nodejs_addon.target.mk:175: Release/status_nodejs_addon.node] Error 1
```
The `make test` target started to fail on macOS after #14944.

This PR adds 2 Apple SDK frameworks to default shell: `IOKit` and `CoreServices`

The other 2 mentioned in `binding.gyp` are not added, but build is ok.

Resolves: https://github.com/status-im/status-mobile/issues/16356

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-24 10:56:21 +02:00
Jakub Sokołowski 5e6d488a3e
nix: fix cache usage by modifying global config
Otherwise Nix produces warnings like this:
```
warning: ignoring untrusted substituter 'https://nix-cache.status.im/', you are not a trusted user.
```
Since adding users to `trusted-users` essentially gives them `root`:

>Adding a user to trusted-users is essentially equivalent to giving that user root access to the system.
> — https://nixos.org/manual/nix/stable/command-ref/conf-file.html#conf-trusted-users

A more kosher approach might be to just add the cache config itself globally.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-23 18:02:38 +02:00
Jakub Sokołowski 33b2e12e3b
android: fix Gradle deps, drop Flipper, upgrade Fresco
There are a few fixes here:

* Changes format of Gradle deps to `:buildEnvironment` and `:dependencies`:
    ```
    Cannot locate tasks that match '::buildEnvironment'. The path should not include an empty segment (try ':buildEnvironment' instead).
    ```
* Fix for GNU Parallel tool to use stdin for list of arguments:
    ```
    nix/deps/gradle/generate.sh: line 55: parallel: Argument list too long
    ```
* Update of Facebook Fresco dependencies from `2.2.0` to `2.5.0` to fix:
    ```
     > echo com.facebook.fresco:animated-gif:2.2.0 | ./go-maven-resolver > /dev/null
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:imagepipeline-native:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:memory-type-native:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:imagepipeline:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:drawee:2.2.0 O=false S=runtime >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:memory-type-java:2.2.0 O=false S=compile >
    finder.go:121: error: 'no pom data' for: <Dep ID=com.facebook.fresco:fbcore:2.2.0 O=false S=runtime >
    ```
* Remove Flipper to avoid pulling in Fresco `2.2.0` versions:
    ```
    +--- com.facebook.flipper:flipper-fresco-plugin:0.54.0
    |    +--- com.facebook.fresco:fresco:2.2.0 -> 2.5.0
    |    +--- com.facebook.fresco🐬2.2.0
    |    \--- com.facebook.fresco:stetho:2.2.0
    ```

Thanks for help from Sidarth.

Resolves: https://github.com/status-im/status-mobile/issues/16367

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-23 12:02:18 +02:00
Jakub Sokołowski 7260c23e8e
nix: downgrade from 2.14.1 to 2.13.4
Should resolve errors like this:
```
error: file 'nixpkgs' was not found in the Nix search path (add it using $NIX_PATH or -I)
```

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-22 14:23:47 +02:00
Jakub Sokołowski c4b13eb043
nix: use builtins to not depend on channels
We use `builtins.fetchTarball` to avoid having to first import a
`nixpkgs` from existing channels, which breaks if there are no channels.

Otherwise new Nix 2.14 version can result in:
```
error: file 'nixpkgs' was not found in the Nix search path (add it using $NIX_PATH or -I)
```
Which happens due to no default `nixpkgs` channel existing:
```
 > nix-channel --list

```
Resolves: https://github.com/status-im/status-mobile/issues/16342

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-21 15:36:08 +02:00
Mohamed Javid b397411daa
Upgrade `react-native-camera-kit` library to resolve camera issues in Sign In screen (#16248)
Signed-off-by: Mohamed Javid <19339952+smohamedjavid@users.noreply.github.com>
2023-06-20 18:50:05 +05:30
Jakub Sokołowski 6f8dc27282
nix: fix applying nix.conf by using correct env var
According to this line from the docs:

>The system-wide configuration file sysconfdir/nix/nix.conf (i.e. /etc/nix/nix.conf),
>or $NIX_CONF_DIR/nix.conf if NIX_CONF_DIR is set. Values loaded in this file are not
>forwarded to the Nix daemon. The client assumes that the daemon has already loaded them.

https://nixos.org/manual/nix/stable/command-ref/conf-file.html#description

Our usage of `NIX_CONF_DIR` has been wrong for a while now.
The correct way of applying this config is using `NIX_USER_CONF_FILES`.

In addition the `extra-substituters` no longer exists in the docs.
Use of `trusted-substituters` is necessary according to:

>At least one of the following conditions must be met for Nix to use a substituter:
>
>- the substituter is in the trusted-substituters list
>- the user calling Nix is in the trusted-users list

https://nixos.org/manual/nix/stable/command-ref/conf-file.html#conf-substituters

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-20 13:55:07 +02:00
Jakub Sokołowski c97559793c
nix: upgrade nixpkgs to latest nixos-22.11
Notable upgrades:

* Bash `5.1` to `5.2`
* Git `2.37.3` to `2.40.1`
* Curl `7.85.0` to `8.0.1`
* OpenSSL `3.0.5` to `3.0.8`
* Go `1.18.6` to `1.18.9`
* NodeJS `18.9.1` to `18.16.0`
* Java `1.8.0_322` to `11.0.11`
* Ruby `3.1.2` to `3.1.4`
* Python `2.7.18` to `3.10.11`
* Clojure `1.11.1.1165` to `1.11.1.1273`
* Clj-kondo `v2022.10.05` to `v2023.04.14`
* Zprint `1.2.5` to `1.2.6`
* Bundler `2.3.22` to `2.4.13`
* Gradle `6.9.2` to `6.9.4`
* Android Platform Tools `33.0.2` to `33.0.3`
* Android SDK Tools to Android SDK Command-Line Tools

Removals:

* Zprint since the version in `nixpkgs` was newer than in overlay.
* Xcode wrapper definition was removed since my fixes were merged:
  - https://github.com/NixOS/nixpkgs/pull/204278
  - https://github.com/NixOS/nixpkgs/pull/228696

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-20 12:53:06 +02:00
Jakub Sokołowski 93cf54919f
nix: add upgrade script for Nix interpreter
Now developers can upgrade to current Nix version using just:
```sh
make nix-upgrade
```
For manual instructions see:
https://nixos.org/manual/nix/stable/installation/upgrading.html

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-19 12:21:00 +02:00
Jakub Sokołowski 5f50a8c39a
nix: upgrade interpreter from 2.11.1 to 2.14.1
This is a mild upgrade that should not cause any controversy.

You can read about changes here:
- https://nixos.org/manual/nix/stable/release-notes/rl-2.12.html
- https://nixos.org/manual/nix/stable/release-notes/rl-2.13.html
- https://nixos.org/manual/nix/stable/release-notes/rl-2.14.html

Relevant `infra-ci` change:
- https://github.com/status-im/infra-ci/commit/e4e9796f

The simplest way to upgrade to `2.14` your version locally is using:
```sh
nix-channel --update
nix-env -iA nixpkgs.nixVersions.nix_2_14 nixpkgs.cacert
sudo systemctl daemon-reload
sudo systemctl restart nix-daemon
```
For MacOS the instructions are a bit different:
https://nixos.org/manual/nix/stable/installation/upgrading.html

Keep in mind you should use `nixpkgs.nixVersions.nix_2_14` instead
of just `nixpkgs.nix` to avoid getting newer than `2.14`.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-06-19 10:58:56 +02:00
Jamie Caprani 2cbc94320d
feat: add parallax component (#16277) 2023-06-16 03:09:10 -07:00
Siddarth Kumar 350303256b
upgrade `react-native` from 0.67.5 to 0.69.10 (#16016) 2023-06-14 07:17:41 +05:30
flexsurfer fb4d484d7d
bump reagent 1.2.0 (#16070) 2023-05-31 13:35:31 +02:00
Icaro Motta 9dad4716d6
Upgrade re-frame (#15997)
This commit upgrades re-frame to v1.3.0 (latest stable release), released ~9
months ago, in 2022-08-27. This is a solid upgrade, with no breaking changes as
far as I tested status-mobile. It's a great testament of re-frame's stability
and commitment to backwards compatibility, as are many Clojure libs.

Fixes https://github.com/status-im/status-mobile/issues/15963

The big, and truly relevant addition is the introduction of the :fx built-in
effect that was added ~3 years ago in Aug/2020 in v1.1.0.

Relevant changelog:

- Global interceptors are now supported (added in v1.0.0).
- reg-event-fx will just warn (not generate an error) if the effect map returned
  contains an unknown effect key.
- re-frame will now warn us when we are calling subscribe outside of a reactive
  context.
- "re-frame now guarantees that a :db effect, if present, will be actioned
  before any other sibling effects. re-frame continues to provide NO guarantees
  about the order in which other effects will be actioned."
  (https://day8.github.io/re-frame/releases/2020/#110-2020-08-24)
- There's syntactic sugar for trivial reg-sub declarations (added in v1.3.0).
  See the documentation for reg-sub for more details
  https://day8.github.io/re-frame/api-re-frame.core/#reg-sub
- "The built-in effect :dispatch-later can now take a single map value.
  Supplying a sequence of maps is now deprecated in favor of using multiple
  :dispatch-later effects within the new :fx effect."
  https://day8.github.io/re-frame/releases/2020/#111-2020-08-26
2023-05-31 06:08:34 -03:00
Jakub Sokołowski 58d20967ae
nix: use jsbundle derivation for iOS as well
For some unknown to me reason we are using a different Yarn call to
Shadow-cljs to generate the JSBundle for iOS builds, while the one
created by the Android derivation shoudl be exactly the same.

I'm changing the target to just be `make jsbundle` while keeping aliases
referencing old naming, and moving things around in `nix` folder to
reflect the fact that the derivation is no longer Android-specific.

Also, crucially, I've changed the `import` in `index.js` to use the
`./result/index.js` path, since that's what Nix creates. I'm not sure if
this clashes with any developer workflow that takes place locally, so
I'd appreciate some testing from developers.

Depends on: https://github.com/status-im/status-jenkins-lib/pull/67

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-05-22 10:31:09 +02:00
Jakub Sokołowski ac3eb3e660
nix: use SRI hashes for Gradle dependencies
This way we will use the same format as Nix logs and errors when a hash
changes, which avoids confusion.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-05-10 15:45:32 +02:00
Ajay Sivan 1aff364595
fix: android blur view hash mismatch in some locations 2023-05-09 21:36:12 +02:00
Jakub Sokołowski b7a138118a
nix: update Gradle dependencies
Contains changes that should have been included in:
https://github.com/status-im/status-mobile/pull/15713

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-05-08 16:22:18 +02:00
Jakub Sokołowski f03e11c877
nix: fix handling POMs without JARs
Otherwise we can get a failure like this:
```
Regenerating Nix files...
Found 40 sub-projects...
Found 609 direct dependencies...
Found 889 dependency URLs...
 ! Failed to fetch: https://repo.maven.apache.org/maven2/org/ow2/asm/asm-bom/9.5/asm-bom-9.5.jar
```
When using `make nix-update-gradle`.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-05-08 15:48:19 +02:00
Jakub Sokołowski 2f988fcd47
nix: disable sandboxing for xcodewrapper
Otherwise we see weird errors like this:
```
/nix/store/g0jijpgcb4q54zbvz5p8yvxcnb6lshnk-stdenv-darwin/setup: line 1391: /nix/store/sja8sqq4y5s9ijkb97i3pi2jrhsy40cz-xcode-wrapper-14.3/bin/xcodebuild: Operation not permitted
We require xcodebuild version: 14.3
error: builder for '/nix/store/d1dji0ywl851wgj9vv58ibpm32gq3wsm-xcode-wrapper-14.3.drv' failed with exit code 1;
       last 2 log lines:
       > /nix/store/g0jijpgcb4q54zbvz5p8yvxcnb6lshnk-stdenv-darwin/setup: line 1391: /nix/store/sja8sqq4y5s9ijkb97i3pi2jrhsy40cz-xcode-wrapper-14.3/bin/xcodebuild: Operation not permitted
       > We require xcodebuild version: 14.3
```
Related to: https://github.com/NixOS/nixpkgs/pull/228696

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-04-28 11:24:16 +02:00
Jakub Sokołowski 3e8647d626
nix: add ios-deploy package to ios shell
Also adds an assertion that gives a better error when trying to use an
`ios` Nix shell on an unsupported operating system.

Resolves:
https://github.com/status-im/status-mobile/issues/15695

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-04-20 20:17:38 +02:00
Jakub Sokołowski 40bb07a99b
ci: upgrade Xcode from 14.2 to 14.3
https://developer.apple.com/documentation/xcode-release-notes/xcode-14_3-release-notes

Related: https://github.com/status-im/infra-role-bootstrap-macos/commit/30656dc0

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-04-19 19:10:55 +02:00
Siddarth Kumar 8bf5abdf3d
patch react-native script to not look for `nvm` (#15681) 2023-04-18 22:16:12 +05:30
Jakub Sokołowski c3e52dbf47
ios: provide explicit NODE_ARGS in Nix shell
Some users have reported local `make run-ios` failures with errors like:
```
Command PhaseScriptExecution failed with a nonzero exit code
```
Where the actual error that can be found in `ios/logs/react-native-xcode.log` is:
```
node: bad option: --openssl-legacy-provider
```
Caused by a flag we apply to our pinned Node.js `18.9.1` to fix:
```
opensslErrorStack: [ 'error:03000086:digital envelope routines::initialization error' ],
library: 'digital envelope routines',
reason: 'unsupported',
code: 'ERR_OSSL_EVP_UNSUPPORTED'
```
From: https://github.com/status-im/status-mobile/pull/15167

And the need for that should go away once we upgrade Node.js further.
But for now a decent fix is to not apply that flag directly in Xcode
config so as to avoid the `bad option` error when Xcode us called
outside of Nix context.

Fixes: https://github.com/status-im/status-mobile/issues/15631

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-04-13 09:36:42 +02:00
Siddarth Kumar 3bd4038089
Upgrade `react-native` from 0.63.3 to 0.67.5 (#15486)
* [IOS Only] react-native 0.63 to 0.67

* [Android Only] react-native 0.63 to 0.67

* bring back all the jenkinsfiles

* make auto-complete prop for text-input compatible

* [IOS Only] react-native 0.63 to 0.67

* [Android Only] react-native 0.63 to 0.67

* bring back all the jenkinsfiles

* nix: drop unnecessary set -x from status-go build

Signed-off-by: Jakub Sokołowski <jakub@status.im>

* add explicity implementation line for soloader

And add deleteDebugFilesForVariant fix for libhermes.

Signed-off-by: Jakub Sokołowski <jakub@status.im>

* use fast-image for link previews

* fix extra line in message composer on android

This elevation prop is un-necessary and causes an extra line to appear which looks like a border but its actually a shadow.

* don't use `fast-image` for url preview favicon

* fix audio record button interfering cancel android

This fix was not needed in react-native 0.63.4 but is needed after we upgraded to 0.67.5

* get rid of unused platform import

---------
Co-authored-by: Jakub Sokołowski <jakub@status.im>
2023-04-12 15:25:19 +05:30
Ibrahem Khalil a46a3e2a93
Bump go version to work with latest status-go changes (#15614) 2023-04-11 10:11:06 +02:00
Jakub Sokołowski bb73bc76a0
nix: bump nixpkgs to include fix for apksigner
Without this fix:
https://github.com/NixOS/nixpkgs/commit/d0c06fa3

The `apksigner` utility is unavailable on macOS:
```
error: Package ‘apksigner-33.0.1’ in .../pkgs/development/tools/apksigner/default.nix:86
is not supported on ‘x86_64-darwin’, refusing to evaluate.
```

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-04-07 18:05:50 +02:00
Alexander 5be2cd949b
Patch react-native/Yoga to make it possible to build an app using Xcode 14.3 (#15589)
* Patch react-native/Yoga to make it possible to build an app using Xcode 14.3

* Update

* Update

* Comment update

* Comment update
2023-04-06 12:20:36 +02:00
Jakub Sokołowski d71cfd12c1
nix: unpatched Node modules for Gradle deps update
Otherwise we can end up with Gradle failing to find the dependencies
because we've patched away all entries referencing external repos.

Also made the regex in AWS parser a but more strict.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-21 15:21:58 +01:00
Jakub Sokołowski c38fdec5b7
ci: upgrade Node.js from 16.17.1 to 18.9.1
The End-of-Life for Node.js 16 is set to 11th of September 2023.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-21 13:12:56 +01:00
Brian Sztamfater 74da82c61a
feat: implement new splash screen static version
Signed-off-by: Brian Sztamfater <brian@status.im>
2023-03-16 12:57:32 -03:00
Jakub Sokołowski a0697d9242
ios: upgrade Cocoapods to 1.12.0, drop ancient fix
Upgrading to Cocoapods and Gems should remove the need for this hack-fix.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-16 10:24:27 +01:00
Jakub Sokołowski ff3249c514
nix: add procps to default shell, and tcl for darwin
Cocoapod installations can fail with errors like:
```
tclsh /Users/jenkins/Library/Caches/CocoaPods/Pods/Release/SQLCipher/3.4.2-f9fcf/tool/addopcodes.tcl parse.h.temp >parse.h
./configure: line 11729: tclsh: command not found
./configure: line 12262: tclsh: command not found
./configure: line 12276: tclsh: command not found
```
If a pure shell is used. Also `pgrep` would be missing from a pure shell.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-10 16:19:11 +01:00
Jakub Sokołowski 80a75c5232
nix: patch all Gradle configs of nodejs deps
Before we were patching only `build.gradle`, which is not the only type
of Gradle config file. If we do not cover them all we can encounter
errors about missing package because they will continue using remote
repositories instead of `mavenLocal()`, to which pass Nix store path.

We also need to cover `gradlePluginPortal()` to provide plugins.

This is also necessary for the React Native upgrade:
https://github.com/status-im/status-mobile/pull/15203

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-04 13:01:26 +01:00
Jakub Sokołowski 20a0cc01f6
nix: refactor Gradle deps to be more generic
Refactoring the derivation that fetches all the POMs, JARs,
and AARs in order to make it more generic and easier to extend.
The main change is adding `files` key in `deps.json` which contains
a dict of all the files reletad to given package.

This way we can more easily include other files that might be available
for download, like AARs with ASC suffix, or `nodeps` JARs.

This is also necessary for the React Native upgrade:
https://github.com/status-im/status-mobile/pull/15203

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-04 12:41:29 +01:00
Jakub Sokołowski 4fe8b81bf6
ios: fix xcode using system Node.js version
As discovered in:
https://github.com/status-im/status-mobile/pull/15225

The attempt to fix this in:
https://github.com/status-im/status-mobile/pull/15180

But it doesn't appear to work, so instead I'm allowing an override of
`NODE_BINARY` variable and spetting it when defining the Nix shell.

The key things here are:

* Xcode injects its own paths into `PATH` which breaks Nix env.
* Combining Nix shells with `inputsFrom` does not inherit all vars.

It's important to set these variables in `shellHook` and not elsewhere.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-03-02 17:32:52 +01:00
Jakub Sokołowski b72f0d4702
nix: fix Gradle nodeps JAR symlink filename
Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-02-28 17:57:39 +01:00
Jakub Sokołowski 51276237f2
nix: include nodeps JARs in Gradle deps (#15212)
* nix: update gradle dependencies

Signed-off-by: Jakub Sokołowski <jakub@status.im>

* nix: include nodeps JARs in Gradle deps

Signed-off-by: Jakub Sokołowski <jakub@status.im>

* nix: include nodeps JAR for semver4j 0.16.4

Can cause failures like in some cases:
```
A problem occurred configuring project ':react-native-hole-view'.
> Could not resolve all files for configuration ':react-native-hole-view:classpath'.
   > Could not find semver4j-0.16.4-nodeps.jar (com.github.gundy:semver4j:0.16.4).
     Searched in the following locations:
         file:/nix/store/3n2pxsqa2izlx8c23s6jgqai0bqaklm1-status-mobile-maven-deps/com/github/gundy/semver4j/0.16.4/semver4j-0.16.4-nodeps.jar
```

Signed-off-by: Jakub Sokołowski <jakub@status.im>

---------

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-02-28 17:13:44 +05:30
Michele Balistreri 6a58f9552d
update keycard native module
Signed-off-by: Michele Balistreri <michele@bitgamma.com>
2023-02-23 11:11:20 +01:00
Jakub Sokołowski e2169cbbd4
ios: use --openssl-legacy-provider with iOS builds
Fixes issue with following failure:
```
Failed to construct transformer:  Error: error:0308010C:digital envelope routines::unsupported
    at new Hash (node:internal/crypto/hash:71:19)
    at Object.createHash (node:crypto:130:10)
    at stableHash (/Users/jenkins/workspace/status-mobile/platforms/ios/node_modules/metro-cache/src/stableHash.js:19:8)
    at JsTransformer.getCacheKey (/Users/jenkins/workspace/status-mobile/platforms/ios/node_modules/metro/src/JSTransformer/worker.js:471:7)
    at getTransformCacheKey (/Users/jenkins/workspace/status-mobile/platforms/ios/node_modules/metro/src/DeltaBundler/Transformer/getTransformCacheKey.js:39:29)
    at new Transformer (/Users/jenkins/workspace/status-mobile/platforms/ios/node_modules/metro/src/DeltaBundler/Transformer.js:147:28)
    at /Users/jenkins/workspace/status-mobile/platforms/ios/node_modules/metro/src/Bundler.js:54:29
    at runMicrotasks (<anonymous>)
    at processTicksAndRejections (node:internal/process/task_queues:96:5) {
  opensslErrorStack: [ 'error:03000086:digital envelope routines::initialization error' ],
  library: 'digital envelope routines',
  reason: 'unsupported',
  code: 'ERR_OSSL_EVP_UNSUPPORTED'
```
https://roytuts.com/how-to-fix-err_ossl_evp_unsupported-in-react-js-application/

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2023-02-22 18:48:03 +01:00
Jakub Sokołowski 0f8ad69319
Nix/upgrade zprint 1.2.5 (#15113)
* nix: upgrade zprint from 1.2.4 to 1.2.5

To address issue described in:
https://github.com/kkinnear/zprint/issues/273

Signed-off-by: Jakub Sokołowski <jakub@status.im>

* chore: use zprint :multi-lhs-hang

* refactor: re-format clojure using zprint 1.2.5

---------

Signed-off-by: Jakub Sokołowski <jakub@status.im>
Co-authored-by: yqrashawn <namy.19@gmail.com>
2023-02-17 20:10:00 +08:00
Parvesh Monu 612c17a8db
Add blur overlay for bottom tabs and shell top nav (#14783) 2023-01-25 20:08:11 +05:30
Alexander 27c8c5547c
[#14689] Link previews in chat (#14771)
* Initial

* Link fetching

* Post-merge fix
2023-01-18 22:43:26 +01:00
yqrashawn 9ded8bfe97
chore: tweak zprint conf (#14645) 2022-12-28 10:05:24 +08:00
yqrashawn 39e29cfb5a
feat: replace clj-fmt with zprint (#14520) 2022-12-20 21:57:49 +08:00
Parvesh Monu d4897de205
partially implement shell jump-to navigation (#14410) 2022-11-30 21:46:01 +05:30
Jamie Caprani 9de4417f03
chore: update nix config to reference babel.config.js file (#14436)
* chore: update nix config to reference babel.config.js file

* chore: update component test make command
2022-11-24 13:05:58 -08:00
Richard Ramos 0f6022a731 chore: set gowaku build tags for status-go
Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-11-09 18:47:15 +01:00
Jakub Sokołowski 93f5b2e32c
nix: fix shadow-cljs on M1 by upgrading to 2.11.16
On M1 calling `shadow-cljs` fails with:
```
Execution error (UnsatisfiedLinkError) at java.lang.ClassLoader$NativeLibrary/load (ClassLoader.java:-2).
/private/var/folders/__/x311ykg17rqgq2wyl4kn1pdr0001yh/T/jna8753030888504535661.tmp:
    dlopen(/private/var/folders/__/x311ykg17rqgq2wyl4kn1pdr0001yh/T/jna8753030888504535661.tmp, 0x0001):
        tried: '/private/var/folders/__/x311ykg17rqgq2wyl4kn1pdr0001yh/T/jna8753030888504535661.tmp'
            (fat file, but missing compatible architecture (have (unknown,i386,x86_64), need (arm64e)))
```
This is due to an outdeted dependency on JNA 3.2.2, which is pulled in
by `hawk` package which up until release `2.11.16` was a `shadow-clj`
dependency which was removed because it was:

>Only used to be used on macOS since it was slightly faster than the default
>JVM implementation. However in Big Sur it seems to cause issues and break
>completely or just be a lot slower.

https://github.com/thheller/shadow-cljs/commit/f3b89b5a

Dropped the explicit dependency on `org.clojure/core.async` to avoid:
```
WARNING: The org.clojure/core.async dependency in shadow-cljs.edn was ignored.
Default version is used and override is not allowed to ensure compatibility.
```

Resolves: https://github.com/status-im/status-mobile/issues/14196

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-10-20 17:54:02 +02:00
Roman Volosovskyi c017c01c53
[#11335] Use Pokt network as an infura replacement 2022-10-19 17:00:17 +02:00
Icaro Motta 5d775d93fa
Use native binary for the clj-kondo linter (#14179) 2022-10-19 09:54:01 -03:00
Jakub Sokołowski d6a8f912ea
nix: upgrade nixpkgs to latest nixos-unstable
Notable upgrades:

* Go `1.17.11` to `1.18.6`
* NodeJS `16.15.0` to `16.17.1`
* Clojure `1.11.1.1139` to `1.11.1.1165`
* Ruby Gem `3.2.26` to `3.3.20`
* Bundler `2.3.9` to `2.3.22`
* Git `2.36.1` to `2.37.3`
* Curl `7.83.1` to `7.85.0`
* OpenSSL `1.1.1o` to `3.0.5`
* PatchELF `0.14.5` to `0.15.0`
* Android SDK Platform Tools `33.0.1` to `33.0.2`

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-10-12 11:07:57 +02:00
Jakub Sokołowski 6a23f64550
nix: re-add step to call bundler install
Was removed in:
https://github.com/status-im/status-jenkins-lib/pull/48

But only causes issues when version of Ruby Gems change.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-10-12 11:07:56 +02:00
Jakub Sokołowski bcf919fcbb
nix: use android-sdk shell for fdroid-pr target
Also renamed `android-env` shell to `android-sdk` to be more descriptive.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-09-29 12:54:47 +02:00
Jakub Sokołowski 17bb87bb87
nix: upgrade from 2.8.0 to 2.11.1
This also includes the fix for too low `LimitNOFILE`:
https://github.com/NixOS/nix/pull/6553

https://github.com/NixOS/nix/releases/tag/2.11.1

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-09-20 19:03:10 +02:00
Audrius Molis 8ba4f9ebae
Migrate to API 31 for android (#14032) 2022-09-20 13:50:16 +03:00
Jakub Sokołowski 206deca961
nix: patch gomobile to sanitize xcrun output
This resolves issues with weird `status-go` build errors like:
```
cgo: C compiler "2022-09-07" not found: exec: "2022-09-07": executable file not found in $PATH
```
Such errors are caused by `xcrun` spewing warnings to `stdout`. The PR
to fix this issue permanently has been created but it might take a while
before it's merged.

Fix PR: https://github.com/golang/mobile/pull/84
Resolves: https://github.com/status-im/status-mobile/issues/13949

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-09-12 12:22:37 +02:00
Jakub Sokołowski 718e6cdbb3
ci: disable sandbox for status-go iOS builds
Otherwise we get weird failures like these:
```
clang-11: error: cannot use 'cpp-output' output with multiple -arch options
clang-11: error: invalid argument '-mmacos-version-min=10.12' not allowed with '-miphoneos-version-min=8.0'
clang-11: error: invalid argument '-mmacos-version-min=10.12' not allowed with '-miphoneos-version-min=8.0'
```
Depends on: https://github.com/status-im/status-jenkins-lib/pull/47

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-09-01 16:17:47 +02:00
Jakub Sokołowski ca8b721135
nix: fix order of iOS shell components
Possible fix for errors like:
```
bundler: failed to load command: fastlane (/Users/jenkins/.bundle/ruby/2.7.0/bin/fastlane)
/Users/jenkins/.bundle/ruby/2.7.0/gems/fastlane-2.205.2/fastlane_core/lib/fastlane_core/ui/interface.rb:153:in `shell_error!': [!] Shell command exited with exit status 51 instead of 0. (FastlaneCore::Interface::FastlaneShellError)
```

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-08-30 09:27:49 +02:00
Parvesh Monu 05219bd721
Implement react-native-hole-view (#13868) 2022-08-29 21:32:30 +05:30
Jakub Sokołowski 1b8aea87b2
ci: use different IPFS gateway for release builds
f43f43cc...86054875

Depends on: https://github.com/status-im/status-jenkins-lib/pull/44

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-08-26 20:02:27 +02:00
Jakub Sokołowski 5903cf73fb
nix: stop passing watchman socket to Nix builds
This passing of Watchman socket was implemented in order to avoid this:
```
Error: EMFILE: too many open files, watch
    at FSEvent.FSWatcher._handle.onchange (node:internal/fs/watchers:204:21)
Emitted 'error' event on NodeWatcher instance at:
    at NodeWatcher.checkedEmitError (/private/tmp/nix-build-status-mobile-build-nightly-android.drv-0/node_modules/sane/src/node_watcher.js:143:12)
    at FSWatcher.emit (node:events:527:28)
    at FSEvent.FSWatcher._handle.onchange (node:internal/fs/watchers:210:12) {
  errno: -24,
  syscall: 'watch',
  code: 'EMFILE',
  filename: null
}
```
Which is caused by `jest-haste-map` used by `metro` starting to watch
the filesystem for file changes, which is pointless when doing a
one-off build using Nix.

But by setting `CI=true` we can make `metro` not start this waching of
files in the first place, removing the need for use of Watchman entirely.

By entirely dropping use of Watchman we also fix the following issue:
```
[cli] unable to talk to your watchman on /tmp/tmp-status-mobile-ABC/jenkins-state/sock! (Permission denied)
```
Which happens on multi-user Nix installations becuase the user that the
Nix build is executed as is not the same as the user that starts
Watchman and creates the socket file.

Issue: https://github.com/status-im/status-mobile/issues/13783

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-08-10 02:21:12 +02:00
Jakub Sokołowski 8ec2f23203
nix: pass OPENSEA_API_KEY via saveAccountAndLogin
Here the injection of OpenSea API key was done at compile time:
https://github.com/status-im/status-mobile/commit/aa72ac57

But this makes `status-go` builds impure, and also prevents them from
being extracted from `status-mobile` into `status-go` repo.

Instead we pass the `OPENSEA_API_KEY` env variable to JS bundle at build
time, which is then passed to `status-go` via the
`Statusgo.saveAccountAndLogin` call in `saveAccountAndLogin`:
https://github.com/status-im/status-mobile/blob/51174f84/modules/react-native-status/android/src/main/java/im/status/ethereum/module/StatusModule.java#L323-L327

Which sends `NodeConfig` that also contains `WalletConfig` which can
include `OpenseaAPIKey`:
```go
type WalletConfig struct {
    Enabled       bool
    OpenseaAPIKey string `json:"OpenseaAPIKey"`
}
```
https://github.com/status-im/status-go/blob/0135cc15/params/config.go#L510-L514

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-08-05 14:23:33 +02:00
yqrashawn 98ca311a97
feat: lottie splash screen (#13714)
[#13714] feat: lottie splash screen
2022-08-02 12:48:12 +02:00
Jakub Sokołowski c27a74e378
nix: quote path uses to avoid issues with spaces
This is most important on MacOS, but in general is a good idea.

Resolves:
https://github.com/status-im/status-mobile/issues/13715

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-07-27 16:11:28 +02:00
Jakub Sokołowski 1f7fd17ff1
rename status-react to status-mobile
This way the name of the repo makes at least some sense and
matches the `status-desktop` repo naming.

Also updated `status-jenkins-lib` since it also contained
references to `status-react` repo and job names.

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-07-17 14:46:16 +02:00
Parvesh Monu 236bbff493
Implement react-native-blur for android (#13663) 2022-07-14 17:27:04 +05:30
Parvesh Monu 1047c26f69
Switcher and Bottom Tabs Animations and UI Performance Improvements
- Migrated Switcher animations to Reanimated V2
- Added bottom tabs & Stacks Animations
- Improved bottom tabs, tab changing performance
- Polished android & IOS UI
2022-06-28 23:51:24 +05:30
Parvesh Monu d9d3f2bb73
Implement React Native Reanimated V2 2022-06-28 23:51:23 +05:30
Jakub Sokołowski 61653888f8
nix: upgrade gomobile to 2022-05-04 version
Possible fix fix failing `status-go` builds:
https://github.com/status-im/status-react/issues/13346

Other notable upgrades:

* NodeJS `16.15.1` to `16.15.0`
* Yarn `1.22.18` to `1.22.19`
* Clojure `1.11.1.1113` to `1.11.1.1139`

Signed-off-by: Jakub Sokołowski <jakub@status.im>
2022-06-20 19:01:14 +02:00