We need to discard installations with no metadata, as some might be sent
before, so we need to check in the loop that the one we care about is
received.
When an error occours (or the peer disconnect), we return from decorator
as an error is published to the chan.
There are though still 5 or 6 goroutines that want to write on that
channel and at least 3/4 of them will be hanging, leaving them stuck
publishing on the chan.
This though is probably not the cause of
https://github.com/status-im/infra-eth-cluster/issues/39
fills up the stack trace with hung go routines.
There was a bug on status-react where it would save filters that were
not listened to.
This commit adds a task to clean up those filters as they might result
in long syncing times.
This commit also returns topics/ranges/mailserves from messenger in
order to make the initialization of the app simpler and start moving
logic to status-go.
It also removes whisper from vendor.
Marketing was relying on mailserver entries for checking the time a
give peer spent on the app.
This was not accurate as the assumption was that a peer would "ping" a
mailserver every 15s, which is not the case, it only hit the mailserver
as it comes from an "offline" state.
This commit changes the log level of two entries so that we have
connect/disconnect time for a given peer, which should be enough to
calculate roughly the time a peer has been online if connected to our
fleet.
Why make this change?
This change is useful so we can blacklist peer ids, without actually
disconnecting them, so that it's harder for them to tell that they are
being blacklisted. Envelopes will just be dropped.
What has changed?
In waku we pass a config with a list of hex-encoded peer ids, and we
check that against newly received envelopes.
If so we just drop the envelope and return
previously FullNode would only result in setting a bloom filter to full.
This behavior caused issues as you effectively cannot install a filter
on a FullNode, as it would advertise the new topic/bloom filter and stop
receiving all the messages.
This caused an issue when running push notifications servers together
with mailservers, also the behavior is a bit counter-intuitive as I
would expect the FullNode config to be honored no matter of what filters
are installed.
Why make this change?
Currently we only rate limit by number of messages.
This works well if we want to limit a large amount of small messages but
breaks down if sending a smaller amount of large messages.
This commit extends the current code to limit by size as well, setting
the default to 1MB per second, which should be enough.
What has changed?
- Rate limiter for waku only
* Added waku README.md, starting text and structure
Resolves GH-1944
* Added api, config and doc details
* Created Docs for waku.const, envelope and events
* Added notes on Filter
* Rewrote the filter section
* Restructured docs to match new versioning structure
* Moved package files out of the main ToC
* Added waku/common/README.md
* Added details to mailserver.go and notes to api.go
* Update to bloomfilter and const common
* Added common/ helpers.go, errors.go and message.go details
* Added common/metrics.go and protocol details
* Added rate_limiter and topic.go details
* fix rate limiter table
* Added Waku Versioning details
* Added Versioned sub-package file details
* Added better detail for Waku Filters
Addressing https://github.com/status-im/status-go/pull/1949#discussion_r419232235
* Added notes about light nodes not being actually new
* Added more detail for Waku node configs and defaults
* Added details to the version message.go section
* Added details to waku/common/rate_limiter
* Minor typo fix in docs
During the move to waku/1 we removed handing of a deprecated format.
aa7f591587 (diff-ea5e44cf3db4a12b3a2a246c7fa39602R290)
Turns out that no client is using the new format and the only live
client is using the deprecated format.
This commit re-introduces the functionality.
Moved sendBundle() from v*/message_response.go to v*/peer.go
Moved TestSendBundle() from v*/message_response_test.go to v*/peer_test.go
Renamed message.go to v*/message_response.go
Renamed message_test.go to v*/message_response_test.go
* Refactor tidy of waku package
* Added deprecation warning on whisper README.md
* Appeasing the lint gods and testing is good
* Place Whisper deprecation warning in the correct package README
:facepalm
* Implementing changes after team feedback
* More offerings to the lint gods
* Remove apparently redundant context params
* Correctly handle concurrent HandlePeer err
* Revert "Remove apparently redundant context params"
This reverts commit 557dbd0d64.
* Added note to waku/api.go about context
* renamed statusoptions and removed unused global
* Removed OnNewP2PEnvelopes() from WakuHost interface
* Matched v1 Peer with new interface sig
Also changed common/helper.go to common/helpers.go
* Formatting of waku tests and some additional error handling
* Changed version to 0.53.0
* Removed redundant type declaration
* Moved TopicToBloom function into a Topic{} method
* Moved GenerateSecureRandomData() into helpers.go
Why make the change?
This implements waku/1 which is a breaking change as waku/0 diverged
from the specs.
What has changed?
- Added v1 namespace
- Changed the testing code to test from the outside rather than stubbing
p2p specific messages, so that any version specific code is under `vx`
namespaces
- Split waku vs waku/x test code
- Added a test suite that can be used for different versions
Things still to do
I kept the tests we have for the versioned aspect of waku, probably we
want to add some or change other to provide the optimal test coverage.
This commit creates a waku/1 namespace and adds the code to it.
No changes in the protocol have been made (i.e waku/1 is the same as
waku/1 in this commit).
* Refactor tidy of waku package
* Added deprecation warning on whisper README.md
* Appeasing the lint gods and testing is good
* Place Whisper deprecation warning in the correct package README
:facepalm
* Implementing changes after team feedback
* More offerings to the lint gods
* Remove apparently redundant context params
* Correctly handle concurrent HandlePeer err
* Revert "Remove apparently redundant context params"
This reverts commit 557dbd0d64.
* Added note to waku/api.go about context
Why make the change?
As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.
This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .
All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.
In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.
This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.
What has changed?
- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`
Things still to do
Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.
Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
* Refactor of waku.doc.go
Moved out all code from docs.go, placed much of the seemingly misc code into much more closely related files, created a dedicated const file for housing all the package consts.
* Moved doc_test to message_test
* Refactored type collision and check on nil err
* message_test.go fmt
* Implemented whisper/doc.go refactor
* import order change to attempt to please the linter.
* Bug fix on whisper_test.go
I also spotted a load of redundant type casting and fixed some of them
* Add status-option code
This commits changes the behavior of waku introducing a new status-code,
`2`, that replaces the current single options codes.
* linting
Anthony Laibe
Andrea Maria Piana
RichΛrd
Jakub Sokołowski
Samuel Hawksby-Robinson