Add wallet events feed to TransactionManager and send pending changed
events on add and delete
Also
- Remove hardcoded values in the filter query
- Small improvement to query
Updates status-desktop #11233
This fixes returning address identity after that was changed by
the real to/from fix. Previously the address was wrongly used as from
Updates status-desktop #11233
Added test to validate the fix
Also change JOIN to LEFT JOIN between `multi_transactions` and `transactions` table so that we return all entries from `multi_transactions` table even if there is no matching entry in `transactions` table, which might be the case for multi transactions that that could not be detected. This will postpone the error case until we get into details of the multi transaction.
Updates status-desktop #11233
Implement activity.Scheduler to serialize and limit the number of
calls on the activity service. This way we protect form inefficient
parallel queries and easy support async and rate limiting based on the
API requirements.
Refactor the activity APIs async and use the Scheduler for managing
the activity service calls configured with one of the two rules: cancel
ignore.
Updates status-desktop #11170
Main changes:
- Refactor activity API to propagate token identities.
- Extend service to convert token identities to symbols for filtering
multi-transaction
- Filter transfers, pending_transactions and multi-transactions based
on the provided token identities
- Return involved token identities in activity API
- Test token filtering
Also:
- Fixed calling cancel on a filer activity completed task to release
resources
Notes:
- Found limitations with the token identity which complicates things
by not allowing to filter by token groups (like token-code does)
Updates status-desktop #11025
The new API returns all known recipients of a wallet, by
sourcing transfers, pending_transactions and multi_transactions tables
The API is synchronous. Future work will be to make it async.
In some corner cases, when watching a famous wallet, it can
be that there are too many recipients to be returned in one go. Offset
and limit can be used to paginate through the results.
Updates status-desktop #10025
Change smart contract with new API.
Update gas amount for deployment.
Add Burn() and EstimateBurn() functions.
Add RemainingSupply() functions.
Issue #10816
fetch strategy:
Before:
- block fetching commands for different accounts were in the same wait
group, making them dependent on each iteration.
- transfers loading command was checking database for new unloaded
blocks on timeout and was in the same wait group with block fetching, so
it was often blocked until all block fetching commands finish for
iteration.
Now:
- block fetching commands run independently for each account
- transfers fetching command is run once on startup for unloaded blocks
from DB
- fetch history blocks commands are launched once on startup for
accounts with no full history loaded
- transfers are loaded on each iteration of block range check
without waiting for all ranges to be checked
Refactor the filter interface to be an async call which returns
the result using a wallet event
A call to the filter API will cancel the ongoing filter and receive
an error result event
Closes status-desktop #10994
Main changes:
- extend DB query include status for transactions and pending_transactions
- extend DB query to aggregate data from complex activity entries
- extend tests to include the new status values
Other changes:
- Improve tests with mocked addresses in DB to have a true to/from state
Update status-desktop #10746
Extended the migration process with a generic way of applying custom
migration code on top of the SQL files. The implementation provides
a safer way to run GO code along with the SQL migrations and possibility
of rolling back the changes in case of failure to keep the database
consistent.
This custom GO migration is needed to extract the status from
the JSON blob receipt and store it in transfers table.
Other changes:
- Add NULL DB value tracking to JSONBlob helper
- Index status column on transfers table
- Remove unnecessary panic calls
- Move log_parser to wallet's common package and use to extract token
identity from the logs
Notes:
- there is already an index on transfers table, sqlite creates one for
each unique constraint therefore add only status to a new index
- the planned refactoring and improvements to the database have been
postponed due to time constraints. Got the time to migrate the data
though, extracting it can be done later for a more efficient
implementation
Update status-desktop #10746
- reverted a change that stopped looking for ERC20 transfers if no nonce
and balance change found within a block range for ETH
- implemented sending EventRecentHistoryReady event at a proper time
- moved EventFetchingRecentHistory event to Strategy type as it does not make
sense to send this event in loop
- moved iterating through blocks logic to inside of `loadTransfers` command, which
now accepts a block range.
- reuse `uniqueHeaders` function in commands.go
- clean up
Updates #10246
- old `accounts` table is moved/mapped to `keypairs` and `keypairs_accounts`
- `keycards` table has foreign key which refers to `keypairs.key_uid`
- `Keypair` introduced as a new type
- api endpoints updated according to this change
It uses the current data only and doesn't extend with new types or
include new features in activity sources DBs.
Major changes:
- Partially filter by chain IDs
- Partially filter by Status if it is the case
- Partially filter by token types
- Filter by counterparty addresses
- Use wallet accounts for TO/FROM instead of filters
Closes: #10634
This commit does a few things:
1) Extend create/import account endpoint to get wallet config, some of
which has been moved to the backend
2) Set up a loop for retrieving balances every 10 minutes, caching the
balances
3) Return information about which checks are not passing when trying to
join a token gated community
4) Add tests to the token gated communities
5) Fixes an issue with addresses not matching when checking for
permissions
The move to the wallet as a background task is not yet complete, I need
to publish a signal, and most likely I will disable it before merging
for now, as it's currently not used by desktop/mobile, but the PR was
getting to big
were stored in cache by pointers, which caused falsy cache hits in loop
because pointers with same address were created for different block
numbers. Now cache uses block numbers of uint64 as key, which can
overflow but it is not a problem since we use this cache for values
comparison, not as user data.
Fix crash on nil pointer in log.
Remove some unused code.
Protect nonceRanges with mutex while reading.
Updates #10246
Add the possibility of retrieving the metadata of wallet activity based
on the given filter criteria.
Current implementation relies that after fetching the metadata, user
will follow up with more requests for details. However, after some
experimenting I'm considering extracting all required information
for the summary viewing while filtering. This way there will be no
need for another batch requests for transfers, multi-transactions and
pending transactions to show the summary. Only when user wants to see
the details for one will specifically request it.
For this first prototype, the filter criteria is limited to:
- time
- type
- addresses
Major changes:
- Add the filter definition to be used in propagating the filter
information
- Add GetActivityEntries API to return the list of activity entries
for the given addresses/chainIDs by a view in the complete list
- GetTransfersForIdentities to batch retrieve further details of the
transfers
- GetPendingTransactionsForIdentities to batch retrieve further details
of the pending transactions
- Added a new package testutils for tests.
- Added tests
Updates status-desktop #10366
Closes status-desktop #10633
This is done in Nim after the watched pending transaction changes state.
Note: tried to delete all transactions, not only multi-transaction,
as soon as the state is downloaded but it didn't work: noticed crashes
with minted transactions after restart.
Updates status-desktop #10474
strategies.
On mobile devices we might not want to load all transfers history
to avoid high internet traffic consumption or to save some space.
On desktop we will load all transfers in background.
- Moved current fetching transfers implementation to
OnDemandFetchStrategy
- Implemented QueuedAtomicGroup to cache outgoing commands above a
threshold
- Refactored some type names, methods for better clarity:
- LastKnownBlock name was misused
- Block renamed to BlockDAO to clarify what it does and avoid
confusion with geth Block type
- Cleanup - removed unused parameters and types' members
- Changed tests to use in memory DB for speedup
- Added more logging and comments
Updates #10246
The "not found" and "no contract" expected error is caught and wrapped
by ClientWithFallback. The fetching of balance history of next blocks
is aborted which is not desired.
Fix by not treating the error as a connection error in
ClientWithFallback.
prefixes. Changed primary keys and API methods.
Fixed tests and added new ones.
Fixed saved addresses and transaction tests to use ':memory:' sqlite
DB instead of a tmp file to speed up testing by hundred of times.
Fixes#8599
Also:
- extend maximum expected DB entries to fetch
- fix test TestBalanceHistoryGetWithoutOverlappingFetch passing because of all-time stride side effect
Closes status-desktop #9624
The L2 networks have their own block number and average block duration,
so we need to hardcode to keep the logic simplified.
Updates status-desktop: #9582
Add history.exchange sub-package with following responsibilities
- fetch and caches daily exchange rates for tokens
- Partial update if missing form yesterday back
- Implement all time fetching special case
- Fetches the price of the token after merging entries for the selected
chains
history.service package changes
- Return ValuePoint instead of DataPoint
- Value point contains the value in fiat as float64 instead
- Convert merged values from tokens balance (wei) to fiat
Other changes
- Move start/stop balance history to startWallet/stopWallet
- Move cryptocompare to thirdparty package to avoid recursive import
- Rename DataPoint.Value to DataPoint.Balance
- Don't merge entries for single chain
This commit fixes an issue where when accepting a contact request
the other end would display an extra notification.
It also changes WaitOnResponse to collect results. This should make
tests less flaky, since sometimes messages are processed in different
batches.
Now we need to be though exact on what we expect from the response (i.e
use == instead of >, otherwise the same behavior applies)
This uncovered a couple of issues with messenger.Merge, so I have moved
the struct to use a map based collection instead of an array.
This change improves on the previous implementation which used
the block number that doesn't work with incompatible blockchains e.g. L1 vs. L2
Closes: #9205
Extends wallet module with the history package with the following
components:
BalanceDB (balance_db.go)
- Keeps track of balance information (token count, block, block timestamp)
for a token identity (chain, address, currency)
- The cached data is stored in `balance_history` table.
- Uniqueness constrained is enforced by the `balance_history_identify_entry`
UNIQUE index.
- Optimal DB fetching is ensured by the `balance_history_filter_entries`
index
Balance (balance.go)
- Provides two stages:
- Fetch of balance history using RPC calls (Balance.update function)
- Retrieving of cached balance data from the DB it exists (Balance.get
function)
- Fetching and retrieving of data is done for specific time intervals
defined by TimeInterval "enumeration"
- Update process is done for a token identity by the Balance.Update function
- The granularity of data points returned is defined by the constant
increment step define in `timeIntervalToStride` for each time interval.
- The `blocksStride` values have a common divisor to have cache hit
between time intervals.
Service (service.go)
- Main APIs
- StartBalanceHistory: Regularly updates balance history for all
enabled networks, available accounts and provided tokens.
- GetBalanceHistory: retrieves cached token count for a token identity
(chain, address, currency) for multiple chains
- UpdateVisibleTokens: will set the list of tokens to have historical
balance fetched. This is a simplification to limit tokens to a small
list that make sense
Fetch balance history for ECR20 tokens
- Add token.Manager.GetTokenBalanceAt to fetch balance of a specific
block number of ECR20.
- Add tokenChainClientSource concrete implementation of DataSource
to fetch balance of ECR20 tokens.
- Chose the correct DataSource implementation based on the token
"is native" property.
Tests
Tests are implemented using a mock of `DataSource` interface used
to intercept the RPC calls.
Notes:
- the timestamp used for retrieving block balance is constant
Closes status-desktop: #8175, #8226, #8862
* feat(@desktop/wallet): added iso4217 library for fiat currency display decimals
* feat(@desktop/wallet): added token peg info and use numbers for token market values
* feat(@desktop/wallet): added
* feat(@desktop/wallet): added iso4217 library for fiat currency display decimals
* feat(@desktop/wallet): added token peg info and use numbers for token market values
* feat(@desktop/wallet): extend wallet api to fetch prices in multiple currencies
* chore(@desktop/wallet): rename token peg field for clarity
Add functionality to sample and retrieve balance history and cache
it in memory for the current transfer controller.
The end of the balance history is snapped at twice per day to
avoid having to query the blockchain again for each fetching within
12 hours interval
The functionality will be extended with DB caching, API call batching,
"smarter" cache hitting and syncing between devices
Updates: #7662
Main changes:
- Extend saved addresses DB with sync info: sync timestamp, update timestamp
and soft removed flag
- Create custom protobuf message payload to sync saved addresses
- Cleanup saved addresses on each start of messenger, by deleting
soft removed older entries
- Sync all saved addresses on Messenger.SyncDevices calls
- Sync particular changes to saved addresses
- Add SavedAddressManager instance to messenger
- Note, can't find a clean way to pass the SavedAddressManager to the
messenger, so we create another one
- Add tests for sync and new DB API
Closes: #7229
Remove Favourites APIs and update the saved address APIs
Added up migration scripts that move the favourites from the old table
to the saved_addresses table with true flag and then drop the favourites table.
Required by #6546
Added functionality to find target address when 6th param in path is added
for ex: "m'/44'/60'/0'/0/500" reperents the Address at the 500th index
Added a api to get the Address derived from a private key
* Sync Settings
* Added valueHandlers and Database singleton
Some issues remain, need a way to comparing incoming sql.DB to check if the connection is to a different file or not. Maybe make singleton instance per filename
* Added functionality to check the sqlite filename
* Refactor of Database.SaveSyncSettings to be used as a handler
* Implemented inteface for setting sync protobuf factories
* Refactored and completed adhoc send setting sync
* Tidying up
* Immutability refactor
* Refactor settings into dedicated package
* Breakout structs
* Tidy up
* Refactor of bulk settings sync
* Bug fixes
* Addressing feedback
* Fix code dropped during rebase
* Fix for db closed
* Fix for node config related crashes
* Provisional fix for type assertion - issue 2
* Adding robust type assertion checks
* Partial fix for null literal db storage and json encoding
* Fix for passively handling nil sql.DB, and checking if elem has len and if len is 0
* Added test for preferred name behaviour
* Adding saved sync settings to MessengerResponse
* Completed granular initial sync and clock from network on save
* add Settings to isEmpty
* Refactor of protobufs, partially done
* Added syncSetting receiver handling, some bug fixes
* Fix for sticker packs
* Implement inactive flag on sync protobuf factory
* Refactor of types and structs
* Added SettingField.CanSync functionality
* Addressing rebase artifact
* Refactor of Setting SELECT queries
* Refactor of string return queries
* VERSION bump and migration index bump
* Deactiveate Sync Settings
* Deactiveated preferred_name and send_status_updates
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
* feat: Add more attributes from opensea
Add sale / orders information as well as collection traits
* feat: add background color to opensea response
* feat: Add max value and handle float to opensea response
* feat: enable wallet without network binding
* feat: make transfer network aware
* feat: allow to pass initial networks via config
* fix: nil check and feed
* feat: Add documentation with better function name
* fix: do not init the manager more than once
* fix: PR feedbacks
* Bump version
* Update Jenkinsfile.tests
* Convert int to string
Co-authored-by: RichΛrd <info@richardramos.me>
* Updated Ramp siteUrl to use URL in docs and use the referral code
see https://docs.ramp.network/configuration
* Moved Ramp to the top
* Removed local cryptos and transak
* Removed region field from on ramp struct
* Added basic placeholder for latamex
* Added latamex on ramp option
* fee rate change to Ramp
* Updated VERSION
* Bump to major version
Sometimes eth_getBlockByNumber returns txs with chainId which is not
equal to chanin's id. That caused an error and tx fetching was
interrupted. From now on such txs will be skipped.
- avoid making RPC request for `zero - zero` range
- avoid checking of nonce for a lower block in the range if it is zero
in a higher block
- on `wallet_getTransfersByAddress` scanning of history is skipped if
zero block is already reached
- no need to fetch block num before fetching token balances
- old existing ranges are merged when wallet service is started
- a new range is merged with an existing one if possible
This will decrease the number of entries in blocks_range table as
currently it can grow indefinitely (@flexsurfer reported 23307 entries).
This change is also needed for further optimisations of RPC usage.
- Wallet service is not started on foreground event on status-go side
anymore, it leaves a client side opportunity to decide whether new
blocks should be watched.
- `watchNewBlocks` parameter is added to `StartWallet`.
- Some requests are removed/moved to the place where they are necessary.
Stefan
Dario Gabriel Lipicar
Anthony Laibe
Anthony Laibe
Ivan Belyakov
Emil Sawicki
Michal Iskierko
Sale Djenic
Roman Volosovskyi
Andrea Maria Piana
Khushboo-dev-cpp
frank
dlipicar
Richard Ramos
Samuel Hawksby-Robinson
Churikova Tetiana
Jakub Sokołowski
Vitaliy Vlasov
andrey
Eric Mastro