- share requests to join with new privileged roles during reevaluating member role
- share requests to join with new members, joined the community as TOKEN_MASTER, ADMIN
- share requests to join revealed addresses to ADMINS and TOKEN_MASTERS
- refactor common test functionality to make them more predictable
- removed unused CommunityToken protobuf
refactor: associate chats to pubsub topics and populate these depending if the chat belongs to a community or not
refactor: add pubsub topic to mailserver batches
chore: ensure default relay messages continue working as they should
refactor: mailserver functions should be aware of pubsub topics
fix: use []byte for communityIDs
Adding new smart contracts and generated go files.
Deploy token owner function and master token address getter.
Adding deployer and privilegesLevel columns to community_tokens table.
Passing addressFrom to API calls.
Issue #11250
This is a bigger change in how community membership requests are handled
among admins, token masters, owners, and control nodes.
Prior to this commit, all privileged users, also known as
`EventSenders`, were able to accept and reject community membership
requests and those changes would be applied by all users.
This commit changes this behaviour such that:
1. EventSenders can make a decision (accept, reject), but merely forward
their decision to the control node, which ultimately has to confirm
it
2. EventSenders are no longer removing or adding members to and from
communities
3. When an eventsender signaled a decision, the membership request will
enter a pending state (acceptedPending or rejectedPending)
4. Once a decision was made by one eventsender, no other eventsender can
override that decision
This implementation is covered with a bunch of tests:
- Ensure that decision made by event sender is shared with other event
senders
- `testAcceptMemberRequestToJoinResponseSharedWithOtherEventSenders()`
- `testRejectMemberRequestToJoinResponseSharedWithOtherEventSenders()`
- Ensure memebrship request stays pending, until control node has
confirmed decision by event senders
- `testAcceptMemberRequestToJoinNotConfirmedByControlNode()`
- `testRejectMemberRequestToJoinNotConfirmedByControlNode()`
- Ensure that decision made by event sender cannot be overriden by other
event senders
- `testEventSenderCannotOverrideRequestToJoinState()`
These test cases live in three test suites for different event sender
types respectively
- `OwnerWithoutCommunityKeyCommunityEventsSuite`
- `TokenMasterCommunityEventsSuite`
- `AdminCommunityEventsSuite`
In addition to the changes mentioned above, there's also a smaller
changes that ensures membership requests to *not* attached revealed wallet
addresses when the requests are sent to event senders (in addition to
control nodes).
Requests send to a control node will still include revealed addresses as
the control node needs them to verify token permissions.
This commit does not yet handle the case of event senders attempting to
kick and ban members.
Similar to accepting and rejecting membership requests, kicking and
banning need a new pending state. However, we don't track such state in
local databases yet so those two cases will be handled in future commit
to not have this commit grow larger.
- distribute ratchet keys at both community and channel levels
- use explicit `HashRatchetGroupID` in ecryption layer, instead of
inheriting `groupID` from `CommunityID`
- populate `HashRatchetGroupID` with `CommunityID+ChannelID` for
channels, and `CommunityID` for whole community
- hydrate channels with members; channel members are now subset of
community members
- include channel permissions in periodic permissions check
closes: status-im/status-desktop#10998
This component decouples key distribution from the Messenger, enhancing
code maintainability, extensibility and testability.
It also alleviates the need to impact all methods potentially affecting
encryption keys.
Moreover, it allows key distribution inspection for integration tests.
part of: status-im/status-desktop#10998
**This is a breaking change!**
Prior to this commit we had `AddCommunityToken(token *communities,
croppedImage CroppedImage)` that we used to
1. add a `CommunityToken` to the user's database and
2. to create a `CommunityTokenMetadata` from it which is then added to
the community's `CommunityDescription` and published to its members
However, I've then discovered that we need to separate these two things,
such that we can deploy a community token, then add it to the database
only for tracking purposes, **then** add it to the community description
(and propagate to members) once we know that the deploy tx indeed went
through.
To implement this, this commit introduces a new API
`SaveCommunityToken(token *communities.CommunityToken, croppedImage
CroppedImage)` which adds the token to the database only and doesn't
touch the community description.
The `AddCommunityToken` API is then changed that it's exclusively used
for adding an already saved `CommunityToken` to the community
description so it can be published to members. Hence, the signature is
now `AddCommunityToken(communityID string, chainID int, address
string)`, which makes this a breaking change.
Clients that used `AddCommunityToken()` before now need to ensure that
they first call `SaveCommunityToken()` as `AddCommunityToken()` will
fail otherwise.
* chore: make the owner without the community private key behave like an admin
* Add test for the owner without community key
* chore: refactor Community fn names related to the roles
* feat: add api to remove private key and separete owner from private key ownership
For https://github.com/status-im/status-desktop/issues/11475
* feat: introduce IsControlNode for Community
* feat: remove community private key from syncing
* feat: add IsControlNode flag to Community json serialisation
* Update protocol/protobuf/pairing.proto
Co-authored-by: Jonathan Rainville <rainville.jonathan@gmail.com>
---------
Co-authored-by: Jonathan Rainville <rainville.jonathan@gmail.com>
* mute and unmute all community chats when community mute status changes
* unmute community when atleast one channel is unmuted
* fix: save community, extend the function to save muted state and mute duration
chore:
- add CommunityEventsMessage
- refactor community_admin_event to accept a list of events and patch a CommunityDescription
- save/read community events into/from database
- publish and handle community events message
- fixed admin category tests
- rename AdminEvent to Events or CommunityEvents
Adds airdropAddress to the request to join params and a is_airdrop_address flag in the communities_requests_to_join_revealed_addresses table.
This airdropAddress is used by the owner to know which address to use when airdropping
Modify API to handle also ERC20 tokens.
Modify community_tokens table - keep supply as string since string is easly convertible to bigint.BigInt.
Use bigint.BigInt for supply functions and fields.
Issue #11129
This commit extends the `AddCommunityToken` API to also expect an
optional `CroppedImage`, which will be used instead of the `ImageBase64`
path provided by `CommunityToken`, to calculate the actual base64
encoded image.
This commit adds new tables to the database and APIs in `Messenger` and
communities `Manager` to store `CheckChannelPermissionsResponse`s.
The responses are stored whenever channel permissions have been checked.
The reason we're doing this is so that clients can retrieve the last
known channel permission state before waiting for onchain checks to
finish.
Improve `RequestToJoinCommunity` to accept `Addresses` in the request. If `Addresses` is not empty, we then only pass to the owner the selected addresses. The others are ignored.
Does not validate that the addresses in the slice are part of the user's wallet. Those not part of the wallet are just ignored.
This API is used to get a permission status of all channels of a given
community.
Clients can use this API to get the provided information for all
community channels with a single RPC call instead of doing one call
for each channel separately.
Similar to `CheckPermissionToJoin()` we now get
a `CheckChannelPermissions()` API.
It will rely on the same `PermissionResponse` types, but gives
information about both `ViewOnlyPermissions` and
`ViewAndPostPermissions`.
Change smart contract with new API.
Update gas amount for deployment.
Add Burn() and EstimateBurn() functions.
Add RemainingSupply() functions.
Issue #10816
This commit does a few things:
- Adds a migration that adds chainids to communities_request_to_join_revealed_addresses
- Removes RevealedAddress in favor of RevealedAccount which is now a struct that contains the revealed address, as well as the signature and a list of chain IDs on which to check for user funds
- Changes the logic of sending requests to join a community, such that after creating address signatures, the user node will also check which of the addresses has funds on which networks for the community's token permissions, and add the chainds to the RevealedAccount
- Updates checkPermissionToJoin() such that only relevant chainids are used when checking user's funds. Chain IDs are retrieved from RevealedAccounts and matched against token permission criteria chain IDs
There's two scenarios in which we're leaving a community:
We either get kicked or we leave ourselves.
In case of leaving ourselves it's fine to unsubscribe from further
community updates be cause we deliberately chose to leave.
In case of being kicked however, this is different.
Say I'm kicked from a community because its token permissions have
changed, in this case we don't want clients to manually re-subscribe to
the community to get informed when there were further changes.
status-go should rather not unsubscribe if we know for sure we've been
kicked by someone else.
fix flaky test: TestRetrieveBlockedContact
resolve conflict when rebase origin/develop
Feat/sync activity center notification (#3581)
* feat: sync activity center notification
* add test
* fix lint issue
* fix failed test
* addressed feedback from sale
* fix failed test
* addressed feedback from ilmotta
go generate ./protocol/migrations/sqlite/...
feat: add updated_at for syncing activity center notification
* fix(community): stop re-joining comm when receiving a sync community msg
Fixes an issue with chats being reset. Since joining a community resaves the chats with the synced default value, it resets the sate of the chats, losing the unread messages, the muted state and more.
The solution is to block the re-joining of the community. In the case of the sync, we catch that error and just continue on.
* fix(import): fix HandleImport not saving the chat
Doesn't change much, but it could have caused issues in the future, so since we might have modified the chat, we make sure to save them
Also adds a test
* fix tests
This commit does a few things:
1) Extend create/import account endpoint to get wallet config, some of
which has been moved to the backend
2) Set up a loop for retrieving balances every 10 minutes, caching the
balances
3) Return information about which checks are not passing when trying to
join a token gated community
4) Add tests to the token gated communities
5) Fixes an issue with addresses not matching when checking for
permissions
The move to the wallet as a background task is not yet complete, I need
to publish a signal, and most likely I will disable it before merging
for now, as it's currently not used by desktop/mobile, but the PR was
getting to big
* Community request to join changes
* Fix read state for request to join notification
* Bring back deleted notification when updated with response
* Update Request timeout to 7 days
* Update VERSION
When community owners accept pending requests manually, they would be
declined in that process if the request doesn't fullfill the required
token permission criteria.
We don't want this to automatically reject those requests anymore,
instead, owners have to manually reject the requests.
This adds checks to `HandleCommunityRequestToJoin` and
`AcceptRequestToJoinCommunity` that ensure a given user's revealed
wallet addresses own the token funds required by a community.
When community has token permissions of type `BECOME_MEMBER`, the
following happens when the owner receives a request:
1. Upon verifying provided wallet addresses by the requester, the owner
node accumulates all token funds related to the given wallets that
match the token criteria in the configured permissions
2. If the requester does not meet the necessary requirements, the
request to join will be declined. If the requester does have the
funds, he'll either be automatically accepted to the community, or
enters the next stage where an owner needs to manually accept the
request.
3. The the community does not automatically accept users, then the funds
check will happen again, when the owner tries to manually accept the
request. If the necessary funds do not exist at this stage, the
request will be declined
4. Upon accepting, whether automatically or manually, the owner adds the
requester's wallet addresses to the `CommunityDescription`, such that
they can be retrieved later when doing periodic checks or when
permissions have changed.
This commit extends the `CommunityRequestToJoin` with `RevealedAddresses` which represent wallet addresses and signatures provided by the sender, to proof a community owner ownership of those wallet addresses.
**Note: This only works with keystore files maanged by status-go**
At high level, the follwing happens:
1. User instructs Status to send a request to join to a community. By adding a password hash to the instruction, Status will try to unlock the users keystore and verify each wallet account.
2. For every verified wallet account, a signature is created for the following payload, using each wallet's private key
``` keccak256(chatkey + communityID + requestToJoinID) ``` A map of walletAddress->signature is then attached to the community request to join, which will be sent to the community owner
3. The owner node receives the request, and if the community requires users to hold tokens to become a member, it will check and verify whether the given wallet addresses are indeed owned by the sender. If any signature provided by the request cannot be recovered, the request is immediately declined by the owner.
4. The verified addresses are then added to the owner node's database such that, once the request should be accepted, the addresses can be used to check on chain whether they own the necessary funds to fulfill the community's permissions
The checking of required funds is **not** part of this commit. It will be added in a follow-up commit.
* feat: Add seen/unseen activity center state
* feat: ActivityCenterState for grouping ActivityCenter unread messages cnt and seen state
* feat: always use messenger's addActivityCenterNotification & add state to the response
* Remove unused activity center endpoints form api and fix test
This commit refactors the discord import tool such that,
instead of loading all data to be imported into memory at
once, it will now perform the import on a per file basis.
This improves the memory pressure for the node performing
the import and seems to increase its performance as well.
* fix: Accepting or dismissing contact request should mark AC notification as read
* fix: Accepting or declining community request should mark AC notification as read
* fix: Read notification status fo identity verification requests
* fix: Save whole notification object while handling contact requests
* fix: Remove unused functions from activity_center_persistence
* fix: Use Accepted and Dismissed flags for AC notifications with CTA
* fix: Mark notification as unread when we handle accepted verification request
* fix: Replace Warn with Error on fail to save notification, test fixes
* fix: Fix conditions for fetching AC notifications from the db
* fix: Review fixes for err name and conditions array
There were cases where this caused a crash, as handling magnetlinks would try to close
an already closed tasked channel
See https://github.com/status-im/status-desktop/issues/8996 for more information.
This commit extends the task struct such that it can be marked as cancelled and safely
read and written by multiple go routines.
This introduces an addition constraint to archive generation, in which the payload + signature size of all partitioned message that go into an archive should not exceed a certain
threshold.
This is to ensure that archives won't get too big when they are later read into memory.
Jonathan Rainville
Dario Gabriel Lipicar
Mykhailo Prakhov
Igor Sirotin
Boris Melnik
Andrea Maria Piana
Richard Ramos
Mikhail Rogachev
Michal Iskierko
Patryk Osmaczko
Pascal Precht
Volodymyr Kozieiev
Sale Djenic
Samuel Hawksby-Robinson
John Ngei
frank
osmaczko
mprakhov
Mohamed Javid
Ibrahem Khalil