Commit Graph

82 Commits

Author SHA1 Message Date
Volodymyr Kozieiev 09942bf200 Confirmation settings now correctly processed on mailserver 2021-03-01 11:23:17 +01:00
Andrea Maria Piana a1b3e3a772
Clean topics that we don't listen to
There was a bug on status-react where it would save filters that were
not listened to.
This commit adds a task to clean up those filters as they might result
in long syncing times.

This commit also returns topics/ranges/mailserves from messenger in
order to make the initialization of the app simpler and start moving
logic to status-go.

It also removes whisper from vendor.
2021-01-26 09:39:57 +01:00
Andrea Maria Piana 7387049d4b Upgrade linter and address issues 2020-12-28 16:55:14 +01:00
Gheorghe Pinzaru d04e54e54e
Local notifications service (#2026)
Also adds implementation for eth transactions notifications
2020-10-28 10:56:14 +03:00
Andrea Maria Piana 76a37c1b7f Skip flaky test 2020-10-08 13:23:00 +02:00
Andrea Maria Piana 916ed1068f Skip bridge flaky test 2020-10-08 09:48:06 +02:00
Andrea Maria Piana e836ffb47f Soft blacklist peer ids
Why make this change?

This change is useful so we can blacklist peer ids, without actually
disconnecting them, so that it's harder for them to tell that they are
being blacklisted. Envelopes will just be dropped.

What has changed?

In waku we pass a config with a list of hex-encoded peer ids, and we
check that against newly received envelopes.
If so we just drop the envelope and return
2020-09-09 22:57:15 +02:00
Andrea Maria Piana 401d18e558
Enabled push notifications by default and add fleet 2020-08-27 18:54:06 +02:00
Andrea Maria Piana c5577418b7 Implement rate limiting by bytes
Why make this change?

Currently we only rate limit by number of messages.
This works well if we want to limit a large amount of small messages but
breaks down if sending a smaller amount of large messages.

This commit extends the current code to limit by size as well, setting
the default to 1MB per second, which should be enough.

What has changed?

- Rate limiter for waku only
2020-06-15 19:46:23 +02:00
Andrea Maria Piana 2d12ac4fbb Rename rate limiting to packet rate limiting 2020-06-15 19:46:23 +02:00
Andrea Maria Piana d5086d6e89 Remove incentivisation service
Incentivisation was an experiment in running an incentivised fleet that
rewarded nodes based on their well behavior. It was heavily influenced
by https://docs.loki.network/ . It is currently not used anymore, so
removing.
2020-06-01 11:30:04 +02:00
Andrea Maria Piana aa7f591587 Move networking code for waku under `v0` namespace
Why make the change?

As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.

This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .

All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.

In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.

This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.

What has changed?

- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`

Things still to do

Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.

Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
2020-04-27 14:58:02 +02:00
Adam Babik b33ad8147d
Add example to demonstrate Whisper-Waku bridge (#1875) 2020-02-26 20:36:25 +01:00
Adam Babik f335d1cf7e
Prevent starting node without APIModules (#1876) 2020-02-26 20:35:47 +01:00
Andrea Maria Piana 849492fda9
Add statusUpdate code (#1861)
* Add status-option code

This commits changes the behavior of waku introducing a new status-code,
`2`, that replaces the current single options codes.

* linting
2020-02-21 15:48:53 +01:00
Adam Babik e4b0a97cc5
add bridge metrics to Whisper and Waku (#1864) 2020-02-19 15:36:16 +01:00
Adam Babik 76b5dc29dc
Integrate Whisper-Waku bridge in status-go (#1854) 2020-02-18 12:21:01 +01:00
Andrea Maria Piana 141f917e7c
Initialize protocol when waku active (#1832) 2020-02-17 15:38:59 +01:00
Volodymyr Kozieiev 19fc448c85
pending-stickers field added to settings, unit-tests fixed (#1830) 2020-02-13 13:48:04 +02:00
Roman Volosovskyi 9cf640842b
[status-im/status-react#9942] Upgradable paths in configs
Storing absolute path for different configs breaks compatibility on iOS
as app's dir is changed after upgrade. The solution is to store relative
paths and to concatenate it with `backend.rootDataDir`. The only
exception is `LogFile` as it is stored outside `backend.rootDataDir` on
Android. `LogDir` config was added to allow adding of custom dir for log
file.
Configs concerned:
`DataDir`
`LogDir`
`LogFile`
`KeystoreDir`
`BackupDisabledDataDir`
2020-02-03 20:02:01 +02:00
Adam Babik 79b8112f89
Split shhext into shhext and wakuext (#1803) 2020-01-20 21:56:06 +01:00
Pedro Pombeiro 6537cae606 Nimbus node support 2020-01-20 13:15:17 +01:00
Adam Babik 44aa313981
Make shhext and protocol work with Waku (#1777)
This change makes shhext and protocol submodule work with Waku and Whisper.
2020-01-13 20:17:30 +01:00
Adam Babik 37a508a97b
Integrate Waku service (#1759) 2020-01-08 12:12:23 +01:00
Pedro Pombeiro c8a911ebd1 Use goimports instead of gofmt 2020-01-06 10:17:23 +01:00
Adam Babik 4f45bceb9a
Drop peers when rate limit is exceeded (#1732) 2019-12-16 20:38:50 +01:00
Adam Babik a636f33109
Set Whisper version submodule to v6 (#1725) 2019-12-09 11:36:14 +01:00
Adam Babik 4ac4a61e20
Move whisper to status-go monorepo (#1720) 2019-12-09 11:06:04 +01:00
Pedro Pombeiro 26b6d7c36a Create a home submodule for Eth node bridges- Rename StatusBackend to GethStatusBackend 2019-11-27 17:02:09 +01:00
Pedro Pombeiro ed5a5c154d
Move to monorepo structure (#1684)
Move to a monorepo structure with submodules

- Rename status-protocol-go to status-go/protocol
2019-11-21 17:19:22 +01:00
Pedro Pombeiro 2dd74da23d Integrate Nimbus status-protocol-go 2019-11-18 14:30:03 +01:00
Adam Babik c199c8f342
Update Whisper and introduce rate limiting (#1673) 2019-11-18 11:22:23 +01:00
Pedro Pombeiro c874960215
Use status-protocol-go/bridge/geth (#1638)
* Use status-protocol-go/bridge/geth
2019-10-14 09:53:38 +02:00
Pedro Pombeiro a2f106e4c5
Update for status-protocol-go API changes (#1627) 2019-10-09 16:22:53 +02:00
Adam Babik 26880b83d7
Upgrade geth to 1.9.5 and Whisper (#1617) 2019-10-04 17:21:24 +02:00
Dmitry 494cb5bb33 Create single database appdatase 2019-08-21 10:44:50 +03:00
Dmitry Shulyak be9c55bc16
Accounts data management (#1530)
* WIP accounts implementation

* Accounts datasore and changes to status mobile API

* Add library changes and method to update config

* Handle error after account selection

* Add two methods to start account to backend

* Use encrypted database for settings and add a service for them

* Resolve linter warning

* Bring back StartNode StopNode for tests

* Add sub accounts and get/save api

* Changes to accounts structure

* Login use root address and fetch necessary info from database

* Cover accounts store with tests

* Refactor in progress

* Initialize status keystore instance before starting ethereum node

* Rework library tests

* Resolve failures in private api test and send transaction test

* Pass pointer to initialized config to unmarshal

* Use multiaccounts/accounts naming consistently

Multiaccount is used as a login identifier
Account references an address and a key, if account is not watch-only.

* Add login timestamp stored in the database to accounts.Account object

* Add photo-path field for multiaccount struct

* Add multiaccoutns rpc with updateAccount method

Update to any other account that wasn't used for login will return an error

* Fix linter in services/accounts

* Select account before starting a node

* Save list of accounts on first login

* Pass account manager to accounts service to avoid selecting account before starting a node

* Add logs to login with save and regualr login
2019-08-20 18:38:40 +03:00
Andrea Maria Piana cb769ccca9 Revert "Initialize status keystore instance before starting ethereum node"
This reverts commit 476240fbd1.
2019-08-05 16:03:18 +02:00
Dmitry 476240fbd1 Initialize status keystore instance before starting ethereum node 2019-08-01 11:01:02 +03:00
Andrea Franz dcb0fa5262
add multi-account support (#1500)
* add multiaccount support

add multi account ImportPrivateKey and StoreAccount

test derivation from normal keys

* add multiaccount to mobile pkg

* use multiaccount params structs from the mobile pkg

* move multiaccount tests together with the other lib tests

* fix codeclimate warning and temporarily increase methods threshold

* split library_test_utils.go to avoid linter warnings
2019-07-24 20:59:15 +02:00
Dmitry Shulyak 9723b64827
Permissions api (#1524)
* Add permissions api

* Integrate permissions service

* Reduce cyclomatic complexity of the MakeNode function
2019-07-21 08:41:30 +03:00
Dmitry Shulyak 9dbf5a0c86
Add browsers API (#1523)
Add browsers API
2019-07-17 08:28:37 +03:00
Andrea Maria Piana 0ade9a6cbb
Cache keys (#1497)
* Cache keys

Generating a symkey can take up to a second on slow devices, this commit
makes so that keys are saved once generated and stored in the database.
2019-06-24 09:26:25 +02:00
Dmitry Shulyak 047c9b5263
Download transfers starting from latest block header (#1467) 2019-06-14 13:16:30 +03:00
Andrea Maria Piana 354e6981ba
Add network incentivisation service (#1452) 2019-04-29 14:05:49 +02:00
Adam Babik 4c1b6c12e4 [Chaos Unicorn] Expose ChaosModeUpdate (#1422) 2019-03-29 12:55:54 +01:00
Dmitry eeaf669006 Add goerli testnet 2019-03-19 10:56:09 +02:00
Ivan Daniluk 4f3f5ee574 Gomobile support (#1164) 2019-02-01 18:02:52 +01:00
Adam Babik 838acce91f
fix deadlock on starting discovery with custom AdvertiseAddr (#1363) 2019-01-25 19:17:08 +01:00
Dmitry Shulyak 863d07f798 Accept status service config directly from json input (#1337) 2019-01-17 13:56:22 +01:00