`FirstMessageTimestamp` enables members of the community to determine if
there are any messages they can fetch on the community channel(chat).
`FirstMessageTimestamp` is advertised by admin for each community chat
through `CommunityDescription`. It assumes admin is online frequently
enough to capture the first channel message.
For existing communities admin determines first message timestamp by
finding oldest chat message in its local database.
task: status-im/status-desktop#6731
This is so that we can control whether we want to publish the community
when it, or it's categories and channels, are created.
This is needed for the discord import so that we can create communities,
channels and categories without publishing the community and have it
show up in UIs too early.
There are two types of errors "non-critical" (or "warning") and "critical".
These map to error codes `1` and `2` respectively.
The current error codes are a left-over of initial experimenting.
As part of the new Discord <-> Status Community Import functionality,
we're adding an API that extracts all discord categories and channels
from a previously exported discord export file.
These APIs can be used in clients to show the user what categories and
channels will be imported later on.
There are two APIs:
1. `Messenger.ExtractDiscordCategoriesAndChannels(filesToimport
[]string) (*MessengerResponse, map[string]*discord.ImportError)`
This takes a list of exported discord export (JSON) files (typically one per
channel), reads them, and extracts the categories and channels into
dedicated data structures (`[]DiscordChannel` and `[]DiscordCategory`)
It also returns the oldest message timestamp found in all extracted
channels.
The API is synchronous and returns the extracted data as
a `*MessengerResponse`. This allows to make the API available
status-go's RPC interface.
The error case is a `map[string]*discord.ImportError` where each key
is a file path of a JSON file that we tried to extract data from, and
the value a `discord.ImportError` which holds an error message and an
error code, allowing for distinguishing between "critical" errors and
"non-critical" errors.
2. `Messenger.RequestExtractDiscordCategoriesAndChannels(filesToImport
[]string)`
This is the asynchronous counterpart to
`ExtractDiscordCategoriesAndChannels`. The reason this API has been
added is because discord servers can have a lot of message and
channel data, which causes `ExtractDiscordCategoriesAndChannels` to
block the thread for too long, making apps potentially feel like they
are stuck.
This API runs inside a go routine, eventually calls
`ExtractDiscordCategoriesAndChannels`, and then emits a newly
introduced `DiscordCategoriesAndChannelsExtractedSignal` that clients
can react to.
Failure of extraction has to be determined by the
`discord.ImportErrors` emitted by the signal.
**A note about exported discord history files**
We expect users to export their discord histories via the
[DiscordChatExporter](https://github.com/Tyrrrz/DiscordChatExporter/wiki/GUI%2C-CLI-and-Formats-explained#exportguild)
tool. The tool allows to export the data in different formats, such as
JSON, HTML and CSV.
We expect users to have their data exported as JSON.
Closes: https://github.com/status-im/status-desktop/issues/6690
This introduces a flag to configure whether `Messenger.CreateCommunity`
should create a default channel.
As discussed in https://github.com/status-im/status-go/issues/2758, this
is needed for the upcoming functionality to import discord communities.
Closes#2758
This commit introduces a few changes regarding users accessing
communities:
While the APIs still exist, community invites should no longer be
used, instead communities should merely be "shared".
Sharing a community to users allows users to "join" the community,
which in reality makes them request access to that community.
This means, users have to request access to any community, even if
the community has permissions set to NO_MEMBERSHIP
Only difference between ON_REQUEST and NO_MEMBERSHIP is that
ON_REQUEST communities require manual approval of the owner/admin
to access a community. NO_MEMBERSHIP communities accept
automatically (as soon as owner/admin receives the request).
This also implies that users are no longer optimistically added to the
member list of communities, but only after they have been accepted.
This introduces a bit of a message ping-pong for users to know that
someone is now part of a community
This commit introduces a new `clock` field in the
`communities_settings` table so that it can be leveraged for syncing
community settings across devices.
It alsoe exends existing `syncCommunity` APIs to generate
`SyncCommunitySettings` as well, avoiding sending additional sync messages
for community settings.
When editing communities however, we still sync community settings
explicitly are we aren't syncing the community itself in that case.
Previously, we've turned archive support off by default, this means,
community member nodes won't try to download torrent data when they
receive a magnetlink.
This commit ensures that communities joined in the future will have
this setting on, and also all existing communities that the node
isn't admin of will have this feature enabled.
This introduces logic needed to:
- Create WakuMessageArchives and and indices from store waku messages
- History archive torrent data to disk and create .torrent file from
that
- Seed and unseed history archive torrents as necessary
- Starting/stopping the torrent client
- Enabling/disabling community history support for individual components
and starting/stopping the routine intervals accordingly
This does not yet handle magnet links (#2568)
Closes#2567
These are used to store settings for individual communities a
user is part of, either as member or as owner.
This included whether or not the community history archive protocol
is enabled.
This adds a new `CommunitySettings` type and adds
a migration script that introduces a new `communities_settings`
table.
It also extends the `MessengerResponse` type to include
`CommunitySettings` which are honored when communities are being
added, edited, joined or left.
Lastly, this adds a new RPC API to retreive the settings.
Closes#2564
This commit enables mailserver cycle logic by default and make a few
changes:
1) Nodes are graylisted instead of being blacklisted for a set amount of
time. The reason is that if we blacklist, any cut in connectivity
might result in long delays before reconnecting, especially on spotty
connections.
2) Fixes an issue on the devp2p server, whereby the node would not
connect to one of the static nodes since all the connection slots
where filled. The fix is a bit inelegant, it always connects to
static nodes, ignoring maxpeers, but it's tricky to get it to work
since the code is clearly not written to select a specific node.
3) Adds support to pinned mailservers
4) Add retries to mailservers requests. It uses a closure for now, I
think we should eventually have a channel etc, but I'd leave that for
later.
* Added community sync protobuf
* Updated community sync send logic
* Integrated syncCommunity handling
* Added synced_at field and tidied up some other logic
* persistence testing
* Added testing and join functionality
* Fixed issue with empty scan params
* Finshed persistence tests for new db funcs
* Midway debug of description not persisting after sync
* Resolved final issues and tidied up
* Polish
* delint
* Fix error not handled on SetPrivateKey
* fix infinite loop, again
* Added muted option and test fix
* Added Muted to syncing functions, not just in persistence
* Fix bug introduced with Muted property
* Added a couple of notes for future devs
* Added most of the sync RequestToJoin functionality
Tests need to be completed and tests are giving some errors
* Finished tests for getJoinedAndPending
* Added note
* Resolving lint
* Fix of protobuf gen bug
* Fixes to community sync tests
* Fixes to test
* Continued fix of e2e
* Final fix to e2e testing
* Updated migration position
* resolve missing import
* Apparently the linter spellchecks
* Fix bug from #2276 merge
* Bug fix for leaving quirkiness
* Addressed superfluous MessengerResponse field
* Addressed feedback
* VERSION bump
Changes the community invitation text notifications from
“Upgrade to see a community invitation”
to
**InviteUsersToCommunity**
```golang
fmt.Sprintf("You have been invited to the community %s", community.Name())
```
**ShareCommunity**
```golang
fmt.Sprintf("Community %s has been shared with you", community.Name())
```
This commit adds a setting for mailserver, that allows the client to
specify the syncing period.
Also fixes a minor issue with deletion of public chats.
* feat: Add edit communities
Allow Communities to be edited, including display name, description, color, membership, and permissions.
* Added EditCommunity request type
* Fix lint errors
* Allow editing community without changing image
Previously, retaining an existing community image was not possible because the existing community image path had to be provided in the `editCommunity` RPC call to retain the image. However, once the image is processed by status-go, it is encoded as a base64 string and therefore it is not possible to get the original file path back from this string.
This commit allows for the original to be retained by passing an empty string for the image field in the RPC call.
* Don't change permissions. Fixed clock updating
Co-authored-by: Volodymyr Kozieiev <vkjr.sp@gmail.com>
This commit introduces the following changes:
- `local-notifications` require as body an interface complying with
`json.Marshaler`
- removed unmarshaling of `Notifications` as not used (we only Marshal
notifications)
- `protocol/messenger.go` creates directly a `Notification` instead of
having an intermediate format
- add community notifications on request to join
- move parsing of text in status-go for notifications
Patryk Osmaczko
Richard Ramos
Pascal Precht
Michal Iskierko
Mikhail Rogachev
Parvesh Monu
Boris Melnik
frank
Vitaliy Vlasov
Anthony Laibe
Andrea Maria Piana
Jonathan Rainville
Samuel Hawksby-Robinson
Roman Volosovskyi
Eric Mastro
Volodymyr Kozieiev