Commit Graph

29 Commits

Author SHA1 Message Date
André Medeiros be683556ff
fix: close resultsets so we don't leak them (#1809)
* fix: close resultsets so we don't leak them

* Refactor browsers/database

To implement PR suggestions and improve code quality.

* Refactor services/permissions/database

To implement PR suggestions and improve code quality.

Co-authored-by: Samuel Hawksby-Robinson <samuel@samyoul.com>
2020-05-14 11:51:32 +01:00
Andrea Maria Piana 070a5adbee Enable waku node default 2020-03-30 10:52:30 +02:00
Andrey Shovkoplyas 2ca9309953 uint 2020-03-25 07:42:52 +01:00
Andrea Maria Piana de3c33f009 Add appearance setting 2020-03-25 07:42:52 +01:00
Andrea Maria Piana 2d1e06f25f Pull waku-enabled from the database 2020-03-05 21:04:09 +01:00
Andrea Maria Piana 849492fda9
Add statusUpdate code (#1861)
* Add status-option code

This commits changes the behavior of waku introducing a new status-code,
`2`, that replaces the current single options codes.

* linting
2020-02-21 15:48:53 +01:00
Volodymyr Kozieiev 19fc448c85
pending-stickers field added to settings, unit-tests fixed (#1830) 2020-02-13 13:48:04 +02:00
Adam Babik 8b61d92d58
Remove protocol and eth-node submodules (#1835) 2020-02-10 12:22:37 +01:00
Roman Volosovskyi a92a95cf83
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
  each address of a new empty multiaccount this scan required
  1. two `eth_getBalance` requests to find out that there is no any
     balance change between zero and the last block, for eth transfers
  2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
     for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
  also accounts were not deduplicated. So even for an empty multiacc we
  scanned chain twice for each chat and main wallet addresses, in result
  app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
  there were any eth transfers, and that caused empty history in case
  if user already used all available eth (so that both zero and latest
  blocks show 0 eth for an address). There might have been transactions
  but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
  scan, so it could require indefinite number of requests; the scanning
  algorithm was written so that we persisted the whole history of
  transactions or tried to scan form the beginning again in case of
  failure, giving up only after 10 minutes of failures. In result
  addresses with sufficient number of transactions would never be fully
  scanned and during these 10 minutes app could use gigabytes of
  internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
  requests. These requests return significantly bigger responses than
  `eth_getBalance`/`eth_transactionsCount` and it is likely that
  execution of thousands of them in parallel caused failures for
  accounts with hundreds of transactions. Even for an account with 12k
  we could successfully determine blocks with transaction in a few
  minutes using `eth_getBalance` requests, but `eth_getBlock...`
  couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
  caused in average 3-4 times more such requests than is needed.

*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
  then check erc20 in the range where these eth transactions were found.
  For an empty address in multiacc this means:
  1. two `eth_getBalance` transactions to determine that there was no
     balance change between zero and the last block; two
     `eth_transactionsCount` requests to determine there are no outgoing
     transactions for this address; total 4 requests for eth transfers
  2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
     but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
  account, so a new multiacc requires ~25 (we also request latest block
  number and probably execute a few other calls) request to determine
  that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
  1. determine the range which contains 20-25 outgoing eth/erc20
     transactions. This usually requires up to 10 `eth_transactionCount`
     requests
  2. then we scan chain for eth transfers using `eth_getBalance` and
     `eth_transactionCount` (for double checking zero balances)
  3. we make sure that we do not scan db for more than 30 blocks with
     transfers. That's important for accounts with mostly incoming
     transactions, because the range found on the first step might
     contain any number of incoming transfers, but only 20-25 outgoing
     transactions
  4. when we found ~30 blocks in a given range, we update initial
     range `from` block using the oldest found block
  5. and now we scan db for erc20transfers using `eth_getLogs`
     `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
  6. when all blocks which contain incoming/outgoing transfers for a
     given address are found, we save these blocks to db and mark that
     transfers from these blocks are still to be fetched
  7. Then we select latest ~30 (the number can be adjusted) blocks from
     these which were found and fetch transfers, this requires 3-4
     requests per transfer.
  8. we persist scanned range so that we know were to start next time
  9. we dispatch an event which tells client that transactions are found
  10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
  20 transfers, if not we scan chain again and return transfers after

small fixes
2020-01-23 10:36:11 +02:00
yenda 0316f94907
addresses are stored as byte array not sting (#1801) 2020-01-15 21:33:15 +01:00
yenda eb93bab35d
fix error when removing mnemonic (#1790) 2020-01-14 10:55:06 +01:00
Adam Babik 44aa313981
Make shhext and protocol work with Waku (#1777)
This change makes shhext and protocol submodule work with Waku and Whisper.
2020-01-13 20:17:30 +01:00
Andrea Maria Piana 88a1d0111e
Add Commands (#1731)
This commit adds handling of Transaction commands.
2020-01-10 19:59:01 +01:00
yenda d3de88f790 fix stickers persistence (#1779) 2020-01-10 16:12:09 +01:00
Pedro Pombeiro c8a911ebd1 Use goimports instead of gofmt 2020-01-06 10:17:23 +01:00
yenda cf2d16d186
settings api fixes (#1758) 2020-01-02 18:01:38 +01:00
yenda 024f30f0b9 Put settings in a table with schema (#1746)
Move settings table schema from a key-value store to a one row table with many columns.

We now save the first row with initial data in saveAccountAndLogin and follow up saveSetting calls are only saving one setting at a time.

Co-authored-by: Adam Babik <a.babik@designfortress.com>
2019-12-27 10:58:25 +01:00
Pedro Pombeiro dd894ece15 Start abstracting geth Keystore 2019-12-19 14:11:48 +01:00
yenda f855228010 add accounts_deleteAccount method (#1738)
* add accounts_deleteAccount method

* set account created and updated at dates, order by creation date
2019-12-16 10:23:36 -05:00
André Medeiros 0571f561f0
APIs to Get and Create custom Tokens (#1717) 2019-12-10 12:31:08 -05:00
Andrea Maria Piana baa0767c26
Handle membership update message
This commit does a few things:

1) Handle membership updates using protobuf and adds the relevant
endpoints.
2) Store in memory a map of chats + contacts for faster lookups, which
are then flushed to disk on each update
3) Validate incoming messages

Sorry for the large pr, but you know, v1 :)
2019-12-10 15:20:28 +01:00
Roman Volosovskyi 4c0d8dedea
Replace address with keyUid in accounts db
Account's address was used as a primary key in accounts db and as a
deterministic id of an account in some API calls. Also it was used as a
part of the name of the account specific database. This revealed some
extra information about the account and wasn't necessary.
At first the hash of the address was planned to be used as a
deterministic id, but we already have a keyUid which is calculated as
sha256 hash of account's public key and has similar properties:
- it is deterministic
- doesn't reveal accounts public key or address in plain
2019-12-09 11:20:12 +02:00
Andrea Maria Piana fd49b0140e
Move to protobuf for Message type (#1706)
* Use a single Message type `v1/message.go` and `message.go` are the same now, and they embed `protobuf.ChatMessage`

* Use `SendChatMessage` for sending chat messages, this is basically the old `Send` but a bit more flexible so we can send different message types (stickers,commands), and not just text.

* Remove dedup from services/shhext. Because now we process in status-protocol, dedup makes less sense, as those messages are going to be processed anyway, so removing for now, we can re-evaluate if bringing it to status-go or not.

* Change the various retrieveX method to a single one:
`RetrieveAll` will be processing those messages that it can process (Currently only `Message`), and return the rest in `RawMessages` (still transit). The format for the response is:
`Chats`: -> The chats updated by receiving the message
`Messages`: -> The messages retrieved (already matched to a chat)
`Contacts`: -> The contacts updated by the messages
`RawMessages` -> Anything else that can't be parsed, eventually as we move everything to status-protocol-go this will go away.
2019-12-05 17:25:34 +01:00
Roman Volosovskyi 5f6c7008e1
Add KeyUID to IdentifiedAccountInfo
This field will be used as a deterministic id of multiaccount on
status-react side instead of master key address. The reason why
it is calculated as sha256 of public key is that this way is
already used on keycard side and it will simplify integration.

Rename keycardKeyUid to keyUid

As long as this field will be present in all multiaccounts from now on it
shouldn't be named as keycard specific.
2019-11-22 17:50:24 +02:00
dmitry bf95a71f6f Verify valid sub-accounts using database 2019-08-30 14:11:00 +03:00
Dmitry cee3f70265 Add fields necessary for a login with keycard 2019-08-23 10:39:01 +03:00
Dmitry da5876f632 Add api method settings_getConfigs to retrieve list of configs in a batch quer 2019-08-22 17:32:44 +03:00
Dmitry 494cb5bb33 Create single database appdatase 2019-08-21 10:44:50 +03:00
Dmitry Shulyak be9c55bc16
Accounts data management (#1530)
* WIP accounts implementation

* Accounts datasore and changes to status mobile API

* Add library changes and method to update config

* Handle error after account selection

* Add two methods to start account to backend

* Use encrypted database for settings and add a service for them

* Resolve linter warning

* Bring back StartNode StopNode for tests

* Add sub accounts and get/save api

* Changes to accounts structure

* Login use root address and fetch necessary info from database

* Cover accounts store with tests

* Refactor in progress

* Initialize status keystore instance before starting ethereum node

* Rework library tests

* Resolve failures in private api test and send transaction test

* Pass pointer to initialized config to unmarshal

* Use multiaccounts/accounts naming consistently

Multiaccount is used as a login identifier
Account references an address and a key, if account is not watch-only.

* Add login timestamp stored in the database to accounts.Account object

* Add photo-path field for multiaccount struct

* Add multiaccoutns rpc with updateAccount method

Update to any other account that wasn't used for login will return an error

* Fix linter in services/accounts

* Select account before starting a node

* Save list of accounts on first login

* Pass account manager to accounts service to avoid selecting account before starting a node

* Add logs to login with save and regualr login
2019-08-20 18:38:40 +03:00