The following three new functions introduced, for which password should be verified
on the client side (in case of a keycard user we don't have keystores to check pass):
- `AddAccountWithMnemonicPasswordVerified`
- `AddAccountWithMnemonicAndPathPasswordVerified`
- `AddAccountWithPrivateKeyPasswordVerified`
- `GenerateAccountPasswordVerified`
- `GenerateAccountWithDerivedPathPasswordVerified`
update
* feat(ActivityCenter): Add community request AC notification
* feat(ActivityCenter): Add CommunityID to AC notification
* feat(ActivityCenter): Add membership status for community membership AC notifications
* feat(ActivityCenter): Add tests for community notifications and fix naming
* Add notification for kicked from community action
* feat(ActivityCenter): Fix for missing notification objects for tests
Main changes:
- Extend saved addresses DB with sync info: sync timestamp, update timestamp
and soft removed flag
- Create custom protobuf message payload to sync saved addresses
- Cleanup saved addresses on each start of messenger, by deleting
soft removed older entries
- Sync all saved addresses on Messenger.SyncDevices calls
- Sync particular changes to saved addresses
- Add SavedAddressManager instance to messenger
- Note, can't find a clean way to pass the SavedAddressManager to the
messenger, so we create another one
- Add tests for sync and new DB API
Closes: #7229
- added `SpectateCommunity` endpoint, it is supposed to be used in
scenarios where we want to "Go to public Community" and see its
content without joining
- added `spectated` field to `Community`, it means we are observing the
community and its chats but we are not members
Use case:
https://github.com/status-im/status-desktop/issues/7072#issuecomment-1246560885
This adds a new `DownloadingHistoryArchivesFinished` signal to the
family of community archive signals. It's emitted when all to be
downloaded archives have been downloaded and handled.
Remove Favourites APIs and update the saved address APIs
Added up migration scripts that move the favourites from the old table
to the saved_addresses table with true flag and then drop the favourites table.
Required by #6546
`FirstMessageTimestamp` enables members of the community to determine if
there are any messages they can fetch on the community channel(chat).
`FirstMessageTimestamp` is advertised by admin for each community chat
through `CommunityDescription`. It assumes admin is online frequently
enough to capture the first channel message.
For existing communities admin determines first message timestamp by
finding oldest chat message in its local database.
task: status-im/status-desktop#6731
Add image_payload column to chats table.
Add Base64Image to chat struct.
Add ImageChange event to propagate image.
Change EditChat API - use CroppedImage.
Process and crop image in EditGroupChat.
As part of the new Discord <-> Status Community Import functionality,
we're adding an API that extracts all discord categories and channels
from a previously exported discord export file.
These APIs can be used in clients to show the user what categories and
channels will be imported later on.
There are two APIs:
1. `Messenger.ExtractDiscordCategoriesAndChannels(filesToimport
[]string) (*MessengerResponse, map[string]*discord.ImportError)`
This takes a list of exported discord export (JSON) files (typically one per
channel), reads them, and extracts the categories and channels into
dedicated data structures (`[]DiscordChannel` and `[]DiscordCategory`)
It also returns the oldest message timestamp found in all extracted
channels.
The API is synchronous and returns the extracted data as
a `*MessengerResponse`. This allows to make the API available
status-go's RPC interface.
The error case is a `map[string]*discord.ImportError` where each key
is a file path of a JSON file that we tried to extract data from, and
the value a `discord.ImportError` which holds an error message and an
error code, allowing for distinguishing between "critical" errors and
"non-critical" errors.
2. `Messenger.RequestExtractDiscordCategoriesAndChannels(filesToImport
[]string)`
This is the asynchronous counterpart to
`ExtractDiscordCategoriesAndChannels`. The reason this API has been
added is because discord servers can have a lot of message and
channel data, which causes `ExtractDiscordCategoriesAndChannels` to
block the thread for too long, making apps potentially feel like they
are stuck.
This API runs inside a go routine, eventually calls
`ExtractDiscordCategoriesAndChannels`, and then emits a newly
introduced `DiscordCategoriesAndChannelsExtractedSignal` that clients
can react to.
Failure of extraction has to be determined by the
`discord.ImportErrors` emitted by the signal.
**A note about exported discord history files**
We expect users to export their discord histories via the
[DiscordChatExporter](https://github.com/Tyrrrz/DiscordChatExporter/wiki/GUI%2C-CLI-and-Formats-explained#exportguild)
tool. The tool allows to export the data in different formats, such as
JSON, HTML and CSV.
We expect users to have their data exported as JSON.
Closes: https://github.com/status-im/status-desktop/issues/6690
This introduces a flag to configure whether `Messenger.CreateCommunity`
should create a default channel.
As discussed in https://github.com/status-im/status-go/issues/2758, this
is needed for the upcoming functionality to import discord communities.
Closes#2758
fix: add verification request to response
fix: code review
add missing functions and simplify timestamp usage
fix: sync verification requests
feat: add endpoint to fetch all received verification requests
feat: add signal when trusting verification request
Co-authored-by: Jonathan Rainville <rainville.jonathan@gmail.com>
This introduces a simple garbage collection which checks for all soft
deleted bookmarks (`removed = 1`) which have been marked for garbage
collection more than 30 days ago from the time of bootstapping the
messenger.
Closes#2705
These APIs are being introduced to address #2706 and #2704, provided
that clients will move to using these APIs instead of the currently
provided equivalent APIs in the browser service.
The `bookmarks` table is being extended with a `deleted_at` field which
can later be used for garbage collection, as "removing" a bookmark is
merely soft deletion and doesn't actually remove the data from the
database.
In addition to those APIs adding and soft deleting bookmark entries,
they also automatically perform a sync operation to ensure that
bookmarks are synced in real-time (#2704).
Closes#2706, #2704
* Added function to get preffered network IP
Also done some refactor work oon server package to make a lot more reusable
* Added server.Option and simplified handler funcs
* Added serial number deterministically generated from pk
* Debugging TLS server connection
* Implemented configurable server ip
When accessing over the network the server needs to listen on the network port and not localhost or 127.0.0.1 . Also the cert can now have a dedicated IP
* Refactor of URL funcs to use the url package
* Removed redundant Options pattern in favour of config param
* Added full server test using GetOutboundIP
* Remove references and usage of Server.port
The application does not need to set the port, we rely on the net.Listener to pick a port.
* Version bump
* Added ToECDSA func and improved cert testing
* Added error check in test
* Split Server types, embedding raw Server funcs into specialised server types
* localhost
* Implemented DNS and IP based cert gen
ios doesn't allow for restricted ip addresses to be used in a valid tls cert
* Replace listener handling with original port store
Also added handlers as a parameter of the Server
Added functionality to find target address when 6th param in path is added
for ex: "m'/44'/60'/0'/0/500" reperents the Address at the 500th index
Added a api to get the Address derived from a private key
This introduces logic needed to:
- Create WakuMessageArchives and and indices from store waku messages
- History archive torrent data to disk and create .torrent file from
that
- Seed and unseed history archive torrents as necessary
- Starting/stopping the torrent client
- Enabling/disabling community history support for individual components
and starting/stopping the routine intervals accordingly
This does not yet handle magnet links (#2568)
Closes#2567
* Sync Settings
* Added valueHandlers and Database singleton
Some issues remain, need a way to comparing incoming sql.DB to check if the connection is to a different file or not. Maybe make singleton instance per filename
* Added functionality to check the sqlite filename
* Refactor of Database.SaveSyncSettings to be used as a handler
* Implemented inteface for setting sync protobuf factories
* Refactored and completed adhoc send setting sync
* Tidying up
* Immutability refactor
* Refactor settings into dedicated package
* Breakout structs
* Tidy up
* Refactor of bulk settings sync
* Bug fixes
* Addressing feedback
* Fix code dropped during rebase
* Fix for db closed
* Fix for node config related crashes
* Provisional fix for type assertion - issue 2
* Adding robust type assertion checks
* Partial fix for null literal db storage and json encoding
* Fix for passively handling nil sql.DB, and checking if elem has len and if len is 0
* Added test for preferred name behaviour
* Adding saved sync settings to MessengerResponse
* Completed granular initial sync and clock from network on save
* add Settings to isEmpty
* Refactor of protobufs, partially done
* Added syncSetting receiver handling, some bug fixes
* Fix for sticker packs
* Implement inactive flag on sync protobuf factory
* Refactor of types and structs
* Added SettingField.CanSync functionality
* Addressing rebase artifact
* Refactor of Setting SELECT queries
* Refactor of string return queries
* VERSION bump and migration index bump
* Deactiveate Sync Settings
* Deactiveated preferred_name and send_status_updates
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
These are used to store settings for individual communities a
user is part of, either as member or as owner.
This included whether or not the community history archive protocol
is enabled.
This adds a new `CommunitySettings` type and adds
a migration script that introduces a new `communities_settings`
table.
It also extends the `MessengerResponse` type to include
`CommunitySettings` which are honored when communities are being
added, edited, joined or left.
Lastly, this adds a new RPC API to retreive the settings.
Closes#2564
This commit introduces a new `TorrentConfig` as per #2563 with dedicated
default values and new options/flags for the status-go CLI.
Since it's part of `NodeConfig`, which is stored per user in the
database, this commit also adds a migration script that adds a new
`torrent_config` table and database APIs to insert and retreive the
torrent config.
Closes#2563
This commit enables mailserver cycle logic by default and make a few
changes:
1) Nodes are graylisted instead of being blacklisted for a set amount of
time. The reason is that if we blacklist, any cut in connectivity
might result in long delays before reconnecting, especially on spotty
connections.
2) Fixes an issue on the devp2p server, whereby the node would not
connect to one of the static nodes since all the connection slots
where filled. The fix is a bit inelegant, it always connects to
static nodes, ignoring maxpeers, but it's tricky to get it to work
since the code is clearly not written to select a specific node.
3) Adds support to pinned mailservers
4) Add retries to mailservers requests. It uses a closure for now, I
think we should eventually have a channel etc, but I'd leave that for
later.
We periodically check whether we should backup contacts through waku.
Currently it's not tied to any event, it will only schedule a backup on
a tick, or through the provided API endpoint.
* feat: Add more attributes from opensea
Add sale / orders information as well as collection traits
* feat: add background color to opensea response
* feat: Add max value and handle float to opensea response
* feat: enable wallet without network binding
* feat: make transfer network aware
* feat: allow to pass initial networks via config
* fix: nil check and feed
* feat: Add documentation with better function name
* fix: do not init the manager more than once
* fix: PR feedbacks
* Bump version
* Update Jenkinsfile.tests
* Convert int to string
Co-authored-by: RichΛrd <info@richardramos.me>
* Protobufs and adapters
* Added basic anon metric service and config init
* Added fibonacci interval incrementer
* Added basic Client.Start func and integrated interval incrementer
* Added new processed field to app metrics table
* Added id column to app metrics table
* Added migration clean up
* Added appmetrics GetUnprocessed and SetToProcessedByIDs and tests
There was a wierd bug where metrics in the db that did not explicitly insert a value would be NULL, so could not be found by . In addition I've added a new primary id field to the app_metrics table so that updates could be done against very specific metric rows.
* Updated adaptors and db to handle proto_id
I need a way to distinguish individual metric items from each other so that I can ignore the ones that have been seen before.
* Moved incrementer into dedicated file
* Resolve incrementer test fail
* Finalised the main loop functionality
* Implemented delete loop framework
* Updated adaptors file name
* Added delete loop delay and quit, and tweak on RawMessage gen
* Completed delete loop logic
* Added DBLock to prevent deletion during mainLoop
* Added postgres DB connection, integrated into anonmetrics.Server
* Removed proto_id from SQL migration and model
* Integrated postgres with Server and updated adaptors
* Function name update
* Added sample config files for client and server
* Fixes and testing for low level e2e
* make generate
* Fix lint
* Fix for receiving an anonMetricBatch not in server mode
* Postgres test fixes
* Tidy up, make vendor and make generate
* delinting
* Fixing database tests
* Attempted fix of does: cannot open `does' (No such file or directory)
not: cannot open `not' (No such file or directory)
exist: cannot open `exist' (No such file or directory) error on sql resource loas
* Moved all anon metric postgres migration logic and sources into a the protocol/anonmetrics package or sub packages. I don't know if this will fix the does: cannot open `does' (No such file or directory)
not: cannot open `not' (No such file or directory)
exist: cannot open `exist' (No such file or directory) error that happens in Jenkins but this could work
* Lint for the lint god
* Why doesn't the linter list all its problems at once?
* test tweaks
* Fix for wakuV2 change
* DB reset change
* Fix for postgres db migrations fails
* More robust implementation of postgres test setup and teardown
* Added block for anon metrics functionality
* Version Bump to 0.84.0
* Added test to check anon metrics broadcast is deactivated
* Protobufs and adapters
* Added basic anon metric service and config init
* Added new processed field to app metrics table
* Added id column to app metrics table
* Added migration clean up
* Added appmetrics GetUnprocessed and SetToProcessedByIDs and tests
There was a wierd bug where metrics in the db that did not explicitly insert a value would be NULL, so could not be found by . In addition I've added a new primary id field to the app_metrics table so that updates could be done against very specific metric rows.
* Updated adaptors and db to handle proto_id
I need a way to distinguish individual metric items from each other so that I can ignore the ones that have been seen before.
* Added postgres DB connection, integrated into anonmetrics.Server
* Removed proto_id from SQL migration and model
* Integrated postgres with Server and updated adaptors
* Added sample config files for client and server
* Fix lint
* Fix for receiving an anonMetricBatch not in server mode
* Postgres test fixes
* Tidy up, make vendor and make generate
* Moved all anon metric postgres migration logic and sources into a the protocol/anonmetrics package or sub packages. I don't know if this will fix the does: cannot open `does' (No such file or directory)
not: cannot open `not' (No such file or directory)
exist: cannot open `exist' (No such file or directory) error that happens in Jenkins but this could work
AllMessagesFromChatsAndCommunitiesWhichMatchTerm method added which returns all messages which
match the search term, if they belong to either any chat from the chatIds array or any channel of
any community from communityIds array.
This api point is necessary for desktop issue 2934.
Fixes: #2934
* feature(@status-go/chat): implement search on sqlcipher (status-go side)
Searching messages by some term for a specific channel is added on the side of status-go.
Fixes: #2912
* Linting
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
* Adding wakunode module
* Adding wakuv2 fleet files
* Add waku fleets to update-fleet-config script
* Adding config items for waku v2
* Conditionally start waku v2 node depending on config
* Adapting common code to use go-waku
* Setting log level to info
* update dependencies
* update fleet config to use WakuNodes instead of BootNodes
* send and receive messages
* use hash returned when publishing a message
* add waku store protocol
* trigger signal after receiving store messages
* exclude linting rule SA1019 to check deprecated packages
* feat: Add edit communities
Allow Communities to be edited, including display name, description, color, membership, and permissions.
* Added EditCommunity request type
* Fix lint errors
* Allow editing community without changing image
Previously, retaining an existing community image was not possible because the existing community image path had to be provided in the `editCommunity` RPC call to retain the image. However, once the image is processed by status-go, it is encoded as a base64 string and therefore it is not possible to get the original file path back from this string.
This commit allows for the original to be retained by passing an empty string for the image field in the RPC call.
* Don't change permissions. Fixed clock updating
Co-authored-by: Volodymyr Kozieiev <vkjr.sp@gmail.com>
* Updated Ramp siteUrl to use URL in docs and use the referral code
see https://docs.ramp.network/configuration
* Moved Ramp to the top
* Removed local cryptos and transak
* add PinMessage and PinnedMessage
* fix gruop pin messages
* add SkipGroupMessageWrap to pin messages
* update pinMessage ID generation to be symmetric
* Add extra event to capture other type of navigations, allow empty screen name, rename cofx to get rid of clj ns, update tests
* Some view ids are greater than 16 characters. Made it 32 to be safe.
* Tab navigation events occur outside nav, add a new validator for them
* Remove navigate to cofx event, capture screens on will focus, get rid of enum and make valid screens a string less than 32 characters
* Run make generate
* Fix test
* Bump version to 0.75.1
This commit introduces the following changes:
- `local-notifications` require as body an interface complying with
`json.Marshaler`
- removed unmarshaling of `Notifications` as not used (we only Marshal
notifications)
- `protocol/messenger.go` creates directly a `Notification` instead of
having an intermediate format
- add community notifications on request to join
- move parsing of text in status-go for notifications
* Removed region field from on ramp struct
* Added basic placeholder for latamex
* Added latamex on ramp option
* fee rate change to Ramp
* Updated VERSION
* Bump to major version
Sometimes eth_getBlockByNumber returns txs with chainId which is not
equal to chanin's id. That caused an error and tx fetching was
interrupted. From now on such txs will be skipped.
* Migrations in place, how to run them?
* Remove down migrations and touch database.go
* Database and Database Test package in place, added functions to get and store app metrics
* make generate output
* Minor bug fix on app metrics insert and select
* Add a validation layer to restrict what can be saved in the database
* Make validation more terse, throw error if schema doesn't exist, expose appmetrics service
* service updates
* Compute all errors before sending them out
* Trying to bring a closjure to appmetrics go
* Expose appmetrics via an api, skip fancy
* Address value as Jason Dawt Rawmasage to ease parsing
* Introduce a buffered chan with magic cap of 8 to minimize writes to DB. Tests for service and API. Also expose GetAppMetrics function.
* Lint issues
* Remove autoincrement, undo waku.json changes, fix error being shadowed, return nil where nil ought to be returned, get rid of buffered channel
* Bump migration number
* Fix API factory usage
* Add comment re:json.RawMessage instead of strings
* Get rid of test vars, throw save error inside the loop
* Update version
Co-authored-by: Samuel Hawksby-Robinson <samuel@samyoul.com>
* Revert "Revert "Expand Local Notifications to support multiple Notification types (#2100)""
This reverts commit 5887337b88.
* Revert "Revert "fix protocol.MessageNotificationBody marshalling""
This reverts commit cf0a16dff1.
* Bump version to 0.70.0
* Added localnotifications for Transaction messages
* Fixed bug where Message.SigPubKey was presumed to be set
* Added lookup for contact existing in Messenger.allContacts
Additionally added functionality to add a contact to the messenger store if it isn't present
* Get chat directly from Messenger.allChats store
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
- avoid making RPC request for `zero - zero` range
- avoid checking of nonce for a lower block in the range if it is zero
in a higher block
- on `wallet_getTransfersByAddress` scanning of history is skipped if
zero block is already reached
- no need to fetch block num before fetching token balances
- old existing ranges are merged when wallet service is started
- a new range is merged with an existing one if possible
This will decrease the number of entries in blocks_range table as
currently it can grow indefinitely (@flexsurfer reported 23307 entries).
This change is also needed for further optimisations of RPC usage.
There was a bug on status-react where it would save filters that were
not listened to.
This commit adds a task to clean up those filters as they might result
in long syncing times.
This commit also returns topics/ranges/mailserves from messenger in
order to make the initialization of the app simpler and start moving
logic to status-go.
It also removes whisper from vendor.
* Initial work on expanding Local Notifications
Adding functionality to support multiple notification types in Notification.Body. Currently have a bug that I think is caused by a the jsonMarshal func not working as intented, need to resolve this next before proceeding
* Fixed json.Marshaller issue and implemented json.Unmarshaller
* Tweak errors, go convention is errors don't begin with capital letters
* Added notificationMessageBody with un/marshalling
Also removed the Body interface
* Added check for bodyType mismatch
* Implement building and sending new message notifications
* Refactor to remove cycle imports
* Resolved linting issue ... Hopefully
* Resolving an implicit memory aliasing in a for loop
* version bump
* Added Notification.Category consts
There was an issue in using the `Wallet` flag when checking accounts to
watch for transactions.
`Wallet` indicates that it's the default wallet, not whether is a wallet
account.
That can only be checked by looking at the type (and the `Wallet` flag).
If the type is `generated`, `key` or `seed` it should be watched for
transactions.
This commit adds an endpoint to batch the sending of messages.
This is useful to simplify client logic when sending a batch of messages
and ensuring the correct order in the message stream.
It currently implements only what's needed, and naively return an error
if any of the messages fail.
We were not actually passing the topics in the request, therefore we
were using bloom filter for query, which resulted in long syncing times
for some users.
- Wallet service is not started on foreground event on status-go side
anymore, it leaves a client side opportunity to decide whether new
blocks should be watched.
- `watchNewBlocks` parameter is added to `StartWallet`.
- Some requests are removed/moved to the place where they are necessary.
If one request failed, the whole batch would fail.
This caused issue as one of the contract is constantly returning an
error now, and essentially there was not way to fetch balance.
Also extend the timeout to 20s as we throw 165 request to Infura in one
go and it takes its time to reply to those, although it seems like we
should batch them on our side instead of sending them all cuncurrently.
For some reason when calling saveChat from desktop with `lastMessage`
set to null, a sigsev is received.
The issue seems to be in logFormat
05280a7ae3/log/format.go (L356)
which for some reason blows up if passed a nil pointer (`lastMessage`).
Can't replicate on any other platform or running it locally, but hey,
this fixes the issue.
StartWallet was called before service initialization.
After the recent changes this call was moved after initialization, but
the geth system automatically start services.
This meant that `IsStarted()` returned true, although the reactor was
not started, and only after calling `StopWallet()` and `StartWallet()`
again the system would reach the right state.
This commit changes the behavior so that we only check whether the
reactor has been started when calling `IsStarted()` and we allow
multiple calls to `Start()` on the signal service, which won't return an
error (it's a noop if callled multiple times).
Incentivisation was an experiment in running an incentivised fleet that
rewarded nodes based on their well behavior. It was heavily influenced
by https://docs.loki.network/ . It is currently not used anymore, so
removing.
* fix: close resultsets so we don't leak them
* Refactor browsers/database
To implement PR suggestions and improve code quality.
* Refactor services/permissions/database
To implement PR suggestions and improve code quality.
Co-authored-by: Samuel Hawksby-Robinson <samuel@samyoul.com>
Why make the change?
As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.
This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .
All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.
In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.
This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.
What has changed?
- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`
Things still to do
Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.
Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
This resolves a dependency conflict we have with MatterBridge
which was using a newer version of the same package.
This resulted in a JSON marshalling bug that would crash the bridge.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
- unused API methods are removed
- some unusued code is removed too
- API docs are updated
That's just a portion of clean up that should be done,
but the rest of it will probably happen in different PR
with changes to the way how we watch to chain updates.
Currently ENS are verified explicitly by status-react, this is not ideal
as if that fails it will have to be explicilty retried in status-react.
This commits changes that behavior so that ENS are verified in a loop
and updated if new messages are received.
- In order to avoid handling of the reorganized blocks we use an offset
from the latest known block when start listening to new blocks. Before
this commit the offset was 15 blocks for all networks. This offset is
too big for mainnet and causes noticeable delay of marking a transfer as
confirmed in Status (comparing to etherscan). So it was changed to be 5
blocks on mainnet and is still 15 blocks on other networks.
- Also before this commit all new blocks were handled one by one with
network specific interval (10s for mainnet), which means that in case of
lost internet connection or application suspension (happens on iOS)
receiving of new blocks would be paused and then resumed with the same
"speed" - 1 blocks per 10s. In case if that pause is big enough the
application would never catch up with the latest block in the network,
and this also causes the state of transfers to be delayed in the
application. In this commit in case if there was more than 40s delay
after receiving of the previous block the whole history in range between
the previous received block and ("latest"-reorgeSafetyDepth) block is
checked at once and app catches up with a recent state of the chain.
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
Move settings table schema from a key-value store to a one row table with many columns.
We now save the first row with initial data in saveAccountAndLogin and follow up saveSetting calls are only saving one setting at a time.
Co-authored-by: Adam Babik <a.babik@designfortress.com>
This commit does a few things:
1) Handle membership updates using protobuf and adds the relevant
endpoints.
2) Store in memory a map of chats + contacts for faster lookups, which
are then flushed to disk on each update
3) Validate incoming messages
Sorry for the large pr, but you know, v1 :)
Account's address was used as a primary key in accounts db and as a
deterministic id of an account in some API calls. Also it was used as a
part of the name of the account specific database. This revealed some
extra information about the account and wasn't necessary.
At first the hash of the address was planned to be used as a
deterministic id, but we already have a keyUid which is calculated as
sha256 hash of account's public key and has similar properties:
- it is deterministic
- doesn't reveal accounts public key or address in plain
* Use a single Message type `v1/message.go` and `message.go` are the same now, and they embed `protobuf.ChatMessage`
* Use `SendChatMessage` for sending chat messages, this is basically the old `Send` but a bit more flexible so we can send different message types (stickers,commands), and not just text.
* Remove dedup from services/shhext. Because now we process in status-protocol, dedup makes less sense, as those messages are going to be processed anyway, so removing for now, we can re-evaluate if bringing it to status-go or not.
* Change the various retrieveX method to a single one:
`RetrieveAll` will be processing those messages that it can process (Currently only `Message`), and return the rest in `RawMessages` (still transit). The format for the response is:
`Chats`: -> The chats updated by receiving the message
`Messages`: -> The messages retrieved (already matched to a chat)
`Contacts`: -> The contacts updated by the messages
`RawMessages` -> Anything else that can't be parsed, eventually as we move everything to status-protocol-go this will go away.
This commits add a field (parsedMessage) to the json payload sent to
status-react.
This field is the parsed version of the transit message.
The code is all in dedup, I will re-organize it once we made all the
necesseary changes.
Wallet database refactored so that every query ensures isolation by the network id.
Network id provided when database object is created, thus it is transparent to other parts
of the wallet module.
Additionally every uniqueness index is changed to ensure that it doesn't prevent adding
object with same id but from a different network.
* WIP accounts implementation
* Accounts datasore and changes to status mobile API
* Add library changes and method to update config
* Handle error after account selection
* Add two methods to start account to backend
* Use encrypted database for settings and add a service for them
* Resolve linter warning
* Bring back StartNode StopNode for tests
* Add sub accounts and get/save api
* Changes to accounts structure
* Login use root address and fetch necessary info from database
* Cover accounts store with tests
* Refactor in progress
* Initialize status keystore instance before starting ethereum node
* Rework library tests
* Resolve failures in private api test and send transaction test
* Pass pointer to initialized config to unmarshal
* Use multiaccounts/accounts naming consistently
Multiaccount is used as a login identifier
Account references an address and a key, if account is not watch-only.
* Add login timestamp stored in the database to accounts.Account object
* Add photo-path field for multiaccount struct
* Add multiaccoutns rpc with updateAccount method
Update to any other account that wasn't used for login will return an error
* Fix linter in services/accounts
* Select account before starting a node
* Save list of accounts on first login
* Pass account manager to accounts service to avoid selecting account before starting a node
* Add logs to login with save and regualr login
* Add Metadata to messages, expose new messenger methods
This commits modifies deduplicator so that it takes a `StatusMessage`
instead of `WhisperMessage` and also returns a `Metadata` field which is
then passed back by the client when confirming messages, which fixes the
issue we had with not confirming pfs messages.
This commit moves envelopes tracking to status-go.
Post endpoint is not going to track envelopes anymore, as that's taken
care on status-protocol-go side, so this is a breaking change, and
version is updated accordingly.
Adds support for datasync, V1Messages and disabling the discovery topic.
This is a backward compatible change as long as they are not toggled on
(they are not by default).
* multi-account login and signing
put methods count threshold back to 20
* validate login params
* refactoring
* use common.Address
* remove unused var in test
* Store tx and receipt in db and cast it to TransferView on read
* Store Log instead of log index
* Use contract from log and bring back address field
* Add tx status and id fields
[services/wallet] Several changes in API after feedback
- Timestamp from block header stored in blocks table and added to each transfers
- From field is computed from signature to offload this computation from client side
- `history` event is added back, so that client can ignore historical blocks when watching
only for new blocks
- block number and timestamp are marshalled in hex. consistent with ethereum data structures
When receiving a message from someone not targeting our device,
we reply with an empty message that includes our own devices, so next
time they send a message they will include our device.
This change flattens messaging/chat package. It also removes dependency between multidevice and chat/protobuf packages.
The Publisher interface was also changed a bit to support more native types.
Version got bumped to 0.29.0-beta.3.
* Move installations to status-go
This commit moves installations management/storage to status-go.
We remove the native binding and provide RPC endpoints to set the
metadata and return a list of our own installations.
* Cache keys
Generating a symkey can take up to a second on slow devices, this commit
makes so that keys are saved once generated and stored in the database.
This commit add topic negotiation to the protocol.
On receiving a message from a client with version >= 1, we will generate
a shared key using Diffie-Hellman. We will record also which
installationID has sent us a message.
This key will be passed back to the above layer, which will then use to
start listening to a whisper topic (the `chat` namespace has no
knowledge of whisper).
When sending a message to a set of InstallationIDs, we check whether we
have agreed on a topic with all of them, and if so, we will send on this
separate topic, otherwise we fallback on discovery.
This change is backward compatible, as long as there is no downgrade of
the app on the other side.
A few changes:
* Factored out the DB in a separate namespace as now it is
being used by multiple services (TopicService and EncryptionService).
* Factored out multidevice management in a separate namespace
* Moved all the test to test the whole protoocl rather than just the encryption service
* Moved all the filter management in status-go
In RequestMessagesSync subscriber is listening to a feed where all whisper
events are posted. After we received event with a request hash - subscriber will
stop actively consuming messages from a feed, as a subscription channel will
get overflow and whole feed will get blocked.
Some events are posted to a feed before request is sent, so blocked feed results
in blocked sending.
Now we will unsubscribe after relevant event was received, and terminate subscriber
explicitly by timeout.
This commits adds support for postgres database.
Currently two fields are stored: the bloom filter and the topic.
Only the bloom filter is actually used to query, but potentially we will
use also the topic in the future, so easier to separate it now in order
to avoid a migration.
As part of a performance profiling of mailserver we noticed that most of
the resources on a query are spend decoding the whisper envelope.
This PR changes the way we store envelopes encoding the Topic into the
database key, so we can check that and we are able to publish the
envelope rawValue if it matches.
The change is backward compatible as only newly added envelopes will
have the new key, while old ones will have to be unmarshaled.
* Replace request ID when same request is restarted
* Remove unnecessary changes
* Execute all writes atomically only if request was processed succesfully
* Fix linter
* Fix shadowed errors
* Fix spelling
* Do not append same reference to a byte slice
* Notify users that envelope was discarded and retry sending it
* Update Gopkg files with released whisper version
* Forgot to remove signal after refactoring
* Split shhext.tracker into envelopes and mail monitors
* Send envelopes on every new attempt to deliver a message
* Re-send user payloads if previous envelopes weren't acknowledged
* Remove debug api across the codebase
Currently we only decrypt messages if received on the current bundle.
This changes the behavior so that messages can be decrypted if sent to
previous bundles as well, as otherwise is a bit restrictive
Currently PFS messages are decrypted and therefore modified before being
passed to the client. This make IDs computation difficult, as we pass
the whole object to the client and expect the object be passed back once
confirmed.
This changes the behavior allowing confirmation by ID, which is passed
to the client instead of the raw object.
This is a breaking change, but status-react is already forward
compatible.
This PR does a few things:
1) Add a call GetContactCode to check whether we have a bundle for a
given user.
2) Add a DH flag to the API (non-breaking change), for those messages
that we want to target all devices (contact-requests for example).
3) Fixes a few small issues with installations, namely if for example a
messages is sent without a bundle (currently not done by any client),
we still infer installation info, so that we can communicate securely
and making it truly optional.
We change the protocol to accomodate publishing multiple bundles, in
order to propagate bundles for group chats and have a way to extend it
further.
This commit re-introduces backward compatibility for direct messages,
to be removed once that is not an issue anymore.
* select account decrypting wallet and chat keys
* adapt account tests to use chat and wallet account/keys
* fix tests using chat address
* changes after review
* fix status service e2e tests
* add account.Info struct returned when creating and recovering an account
* use s.EqualValues to compare recovered accounts
* return Info instead of *Info
* add both address and walletAddress to responses
* Update lib/types.go
Co-Authored-By: gravityblast <andrea@gravityblast.com>
* Update lib/types.go
Co-Authored-By: gravityblast <andrea@gravityblast.com>
* update comment to fix lint
`kdf_iter` parameter is reduced to 3200. This change is done because of
performance reasons, currently key derivation is too slow on some mobile
devices. The number of iterations before this commit is 64000, default
value in `sqlcipher` from version `3.0.0`.
fda4c68bb4/CHANGELOG.md (300---2013-11-05)
Implementation:
`sqlcipher_export` is used for migration, check out the link below
for details
https://www.zetetic.net/sqlcipher/sqlcipher-api/#sqlcipher_export
Change to support sending multiple bundles, as needed for group chats,
limit number of devices to 3 as already done in the UI and refresh
bundle daily.
This change allows to connect to the mail server that we were using before the app was restarted. Separate loop is listening for whisper events, and when we receive event that request was completed we will update time on a peer record.
Records are stored in leveldb. Body of the record is marshaled using json. At this point the only field is a timestamp when record was used.
This loop doesn't control connections, it only tracks what mail server we ended up using. It works asynchronously to connection management loop. Which tracks events that are related to connection state and expiry of the requests.
When app starts we look into the database and select the most recently used record. This record is added to connection management loop first. So if this server is available we will stick to using it. If we weren't able to connect to the same server in configured timeout (5s) we will try to connect to any other server from list of active servers.
closes: #1285
In previous change i used same filtering for a handler that processes confirmations.
But if we are connected with peers that do not support confirmations on whisper level,
whisper may send "Sent" event when envelope is written to a socket. This is our old behaviour.
So, this PR allows to use confirmations from a mail servers and ensure that transition between
multiple version of peers will be smooth.
This change implements connection manager that monitors 3 types of events:
1. update of the selected mail servers
2. disconnect from a mail server
3. errors for requesting mail history
When selected mail servers provided we will try to connect with as many as possible, and later disconnect the surplus. For example if we want to connect with one mail server and 3 were selected, we try to connect with all (3), and later disconnect with 2. It will to establish connection with live mail server faster.
If mail server disconnects we will choose any other mail server from the list of selected. Unless we have only one mail server. In such case we don't have any other choice and we will leave things as is.
If request for history was expired we will disconnect such peer and try to find another one. We will follow same rules as described above.
We will have two components that will rely on this logic:
1. requesting history
If target peer is provided we will use that peer, otherwise we will request history from any selected mail server that is connected at the time of request.
2. confirmation from selected mail server
Confirmation from any selected mail server will bee used to send a feedback that envelope was sent.
I will add several extensions, but probably in separate PRs:
1. prioritize connection with mail server that was used before reboot
2. disconnect from mail servers if history request wasn't expired but failed.
3. wait some time in RequestsMessage RPC to establish connection with any mail server
Currently this feature is hidden, as certain changes will be necessary in status-react.
partially implements: https://github.com/status-im/status-go/issues/1285
We are preparing for the release of this to general public, so a few
things have been added:
1) Add versioning for bundles, and make refresh interval configurable
2) Move files to installationID so no metadata is leaked
3) Re-key using user password db
This commit updates geth to 1.8.17 and adds a possibility to enable metrics during compilation time.
The cascade of issues forced us to upgrade geth to 1.8.17 in order to allow enabling metrics during compilation time. 1.8.17 introduced `NodeID` refactoring and `enode` package which affected our peers pool and integration with Discovery V5.
This commit adds a list new table, installations, which is used to keep
track of which installation are active for a given identity key.
In general, we limit the number of installation that we keep
synchronized to 5, to avoid excessive usage of resources.
Any installation coming from our own identity, will have to be manually
enabled, otherwise we trust the other peer has correctly paired their
devices.
We use a timestamp to decide which installations to keep synchronized as
a logical clock would have make the creation of the bundle more
complicated, but this can always be converted to a logical clock at
later stages without breaking compatibility.
* Implement EIP 712
* Cover majority of cases with tests
* Add solidity and signer tests and cover integer edges case
* Add thin api to sign type data using selected status account
* All integers are extended to int256 and marshalled into big.Int
* Document how deps works
* Fix linter
* Fix errors test
* Add validation tests
* Unmarshal every atomic type in separate functions
- Skipped keys
The purpose of limiting the number of skipped keys generated is to avoid a dos
attack whereby an attacker would send a large N, forcing the device to
compute all the keys between currentN..N .
Previously the logic for handling skipped keys was:
- If in the current receiving chain there are more than maxSkip keys,
throw an error
This is problematic as in long-lived session dropped/unreceived messages starts
piling up, eventually reaching the threshold (1000 dropped/unreceived
messages).
This logic has been changed to be more inline with signals spec, and now
it is:
- If N is > currentN + maxSkip, throw an error
The purpose of limiting the number of skipped keys stored is to avoid a dos
attack whereby an attacker would force us to store a large number of
keys, filling up our storage.
Previously the logic for handling old keys was:
- Once you have maxKeep ratchet steps, delete any key from
currentRatchet - maxKeep.
This, in combination with the maxSkip implementation, capped the number of stored keys to
maxSkip * maxKeep.
The logic has been changed to:
- Keep a maximum of MaxMessageKeysPerSession
and additionally we delete any key that has a sequence number <
currentSeqNum - maxKeep
- Version
We check now the version of the bundle so that when we get a bundle from
the same installationID with a higher version, we mark the previous
bundle as expired and use the new bundle the next time a message is sent
* Implement subscriptions and filtering
* Add e2e test with log filter polling logs from EVM with clique backend
* Apply review comments
* Move devnode to t/devtests to avoid cycle in imports
* allow multiple topics in mailserver requests
* simplify topicsToBloom function
* create test topics simply from the string without hash
* add deprecated comment to MessagesRequest.Topic
Remove `PendingSignRequests` queue from the sign module.
This closes#1027 by removing the pending sign requests queue dependency from the SendTransaction, SignMessage and Recover.
* mailserver sends envelopes in descending order
* add limit value in mailserver request payload
* mailserver sends messages up to the limit specified in the request
* update Archive method to return key and error
* processRequest returns the next page cursor
* add cursor to mailserver request
* add limit and cursor to request payload
* fix request limit encoding
* wait for request completed event in TrackerSuite/TestRequestCompleted
* add cursor to mailserver response
* fix cursor position in payload
* add e2e test for mail server pagination
* validate mail server response size
* remove old limitReached var
* fix lint warnings
* add whisper patch
* fix tests after rebase
* check all return values to avoid lint warnings
* check that all messages have been retrieved after 2 paginated requests
* fix lint warnings
* rename geth patch
* merge mailserver patches into one
* add last envelope hash to mailserver response and EventEnvelopeAvailable event
* update whisper patch
* add docs to MailServerResponse
* update whisper patch
* fix tests and lint warnings
* send mailserver response data on EventMailServerRequestCompleted signal
* update tracker tests
* optimise pagination test waiting for mailserver to archive only before requesting
* rollback mailserver interface changes
* refactoring and docs changes
* fix payload size check to determine if a limit is specified
* add more docs to the processRequest method
* add constants for request payload field lengths
* add const noLimits to specify that limit=0 means no limits
* refactor TestRequestMessageFromMailboxAsync to use s.requestHistoricMessages helper
* send p2pRequestResponseCode from mailserver
* send p2p message response to after sending all historic messages
* mailserver sends `whisper.NewSentMessage` as response
* add mailserver Client and p2pRequestAckCode watchers
* send event with envelopeFeed when p2pRequestAckCode is received
* test request completed event in tracker
* rename mailserver response events and code to RequestCompleteCode
* wait for mailserver response in e2e test
* use SendHistoricMessageResponse method name for mailserver response
* fix lint warnings
* add mailserver request expiration
* send mailserver response without envelope
* add `ttl` to Request struct in shhext_requestMessages
* test that tracker calls handler.MailServerRequestExpired
* add geth patch
* rename TTL to Timeout
* split tracker.handleEvent in multiple methods
Some operations (like deploying contracts) require filter APIs to work.
Since these operations aren't supported on Infura anymore, and we don't
run LES, a separate implemenation of filters is required.
Signed-off-by: Igor Mandrigin <i@mandrigin.ru>
This change adds adds an ability to use different source of time for whisper:
when envelope is created it is used to set expiry
to track when envelope needs to be expired
This time is then used to check validity of the envelope when it is received. Currently If we receive an envelope that is sent from future - peer will get disconnected. If envelope that was received has an expiry less then now it will be simply dropped, if expiry is less than now + 10*2 seconds peer will get dropped.
So, it is clear that whisper depends on time. And any time we get a skew with peers that is > 20s reliability will be grealy reduced.
In this change another source of time for whisper will be used. This time source will use ntp servers from pool.ntp.org to compute offset. When whisper queries time - this offset will be added/substracted from current time.
Query is executed every 2 mins, queries 5 different servers, cut offs min and max and the computes mean value. pool.ntp.org is resolved to different servers and according to documentation you will rarely hit the same.
Closes: #687
* Add RequestMessage to sshext
* E2E tests now use shhext_requestMessages
* Typo in comment
* Enhanced maintainability
* Drop former mailservice
* Code reorg after review
* Fix missed changes after update to 1.8.5
* Rebase on 1.8.5
* Remove outdated patches and apply all others
* Use shh_post that returns hash
* Use bloom filter for request to mailserver
* Remove tests for sending messages without subbing first
* Fix deadlock in ethdb
* Expect null if receipt is not yet created
* Subscribe to messages before sending them in whisper test
Andrea Maria Piana
Sale Djenic
Boris Melnik
Anthony Laibe
Pascal Precht
Mikhail Rogachev
Anthony Laibe
Roman Volosovskyi
Khushboo-dev-cpp
Richard Ramos
Stefan
Patryk Osmaczko
yqrashawn
frank
Samuel Hawksby-Robinson
Michal Iskierko
Ibrahem Khalil
siddarthkay
Parvesh Monu
Churikova Tetiana
Jakub Sokołowski
Vitaliy Vlasov
Vitaliy Vlasov
Jonathan Rainville
andrey
osmaczko
jo-mut
Michele Balistreri
Volodymyr Kozieiev
Pascal Precht
saledjenic
Brian Sztamfater
Shivek Khurana
Eric Mastro
Andrea Franz
Shivek Khurana
Gheorghe Pinzaru
André Medeiros
Adam Babik
Pedro Pombeiro
Pedro Pombeiro
Adam Babik
yenda
dmitry
Igor Mandrigin
Ivan Daniluk
b00ris
Sebastian Delgado
Adrià Cidre
Adam Babik
Igor Mandrigin
Frank Mueller