It appears it is being used by Rendezvous, and if that protocol is not
being used there is no need to set `AdvertiseAddr` either.
I also adjusted all the `Makefile`s to not depend on `PUBLIC_IP` variable.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Since we've broken LibP2P communication with our Rendezvous nodes
somewhere after `v0.79.11` we should not enable it by defaults since it
generates errors like these:
```
failed to dial 16Uiu2...d687e4: all dials failed
failed to negotiate security protocol: protocol not supported
```
Since normal bootnodes are defined as well as a list of static nodes
there should not be a need for using Rendezvous as well.
Resolves: https://github.com/status-im/status-go/issues/2309
Signed-off-by: Jakub Sokołowski <jakub@status.im>
* Adding wakunode module
* Adding wakuv2 fleet files
* Add waku fleets to update-fleet-config script
* Adding config items for waku v2
* Conditionally start waku v2 node depending on config
* Adapting common code to use go-waku
* Setting log level to info
* update dependencies
* update fleet config to use WakuNodes instead of BootNodes
* send and receive messages
* use hash returned when publishing a message
* add waku store protocol
* trigger signal after receiving store messages
* exclude linting rule SA1019 to check deprecated packages
* wip
* file rename
* Adding postgres docker to jenkins test
* update and fix to jenkins file
* More fixing
* tinker
* more tinkering
* agent in stage
* agent in stage fix
* Integrated Andrea's Docker compose work
* Rework to include dockerfile into jenkins unit test
* Customer dockerfile agent
* Change to ENTRYPOINT
* No dir() in Unit Tests
* Removal dir property of dockerfile
* Added lable to agent.dockerfile
* agent set only at stage level
* Added Jakub's suggestion
* removed stage level agent
* replaced docker host name with default 127.0.0.1
* Fix of old NewWhisperEnvelope
* removed user and password settings from postgres connection
* Set explicit postgres user and password
* Change postgres creds to be more generic
* Removed unneeded docker files
* POSTGRES_HOST_AUTH_METHOD because we hate passwords
* chicken chicken chicken
* indents 2 spaces
This should fix issues with re-running builds while skipping some initial stages.
Also removes two libraries we made use of before.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Using `latest` tag is dangerous for non-technical users.
And updating `latest` tag willy-nilly is also bad.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Why make this change?
We are adding support of audio recorded files, similarly to how we did
with images
What has changed?
- Added protobuf definition, only AAC supported
- Added migrations to store files
- Fixed an issue with nil pointer when transaction would fail to be
created, causing the application to crash
This commit adds support for images in protobuf messages.
The client can specify a path which will be used to load the image
and set the corresponding fields.
This makes the assumption that the RCP server runs on the same machine
as the client and they have access to the same files. This holds
currently for both status-react and status-console-client, we could
revisit and adds an upload if that changes in the future.
It was going to be used as proxy from discv5 to rendezvous for les nodes.
We are not using it at the moment, and not clear when we will be using it
and if we are going to use it all.
Additionally it has some memory leaks that need to be fixed, so it is better
to remove it for now and restore once/if we will need it again.
- Replace command line flags with `-c` config flag. Part of #1180
- Convert node config private keys to hex-encoded string versions.
- Remove `GenerateConfig` from library.
- Remove unused `FirebaseConfig` from library.
- Fix loading of `config/status-chain-genesis.json` in non-dev machines.
* Update to geth v1.8.14
* Remove patches that were merged upstream
* Apply patches before 0016
* Fix 0016 and apply it
* Apply everything else
* Pass gas limit as a second argument to simulated backend
* mailserver sends envelopes in descending order
* add limit value in mailserver request payload
* mailserver sends messages up to the limit specified in the request
* update Archive method to return key and error
* processRequest returns the next page cursor
* add cursor to mailserver request
* add limit and cursor to request payload
* fix request limit encoding
* wait for request completed event in TrackerSuite/TestRequestCompleted
* add cursor to mailserver response
* fix cursor position in payload
* add e2e test for mail server pagination
* validate mail server response size
* remove old limitReached var
* fix lint warnings
* add whisper patch
* fix tests after rebase
* check all return values to avoid lint warnings
* check that all messages have been retrieved after 2 paginated requests
* fix lint warnings
* rename geth patch
* merge mailserver patches into one
* add last envelope hash to mailserver response and EventEnvelopeAvailable event
* update whisper patch
* add docs to MailServerResponse
* update whisper patch
* fix tests and lint warnings
* send mailserver response data on EventMailServerRequestCompleted signal
* update tracker tests
* optimise pagination test waiting for mailserver to archive only before requesting
* rollback mailserver interface changes
* refactoring and docs changes
* fix payload size check to determine if a limit is specified
* add more docs to the processRequest method
* add constants for request payload field lengths
* add const noLimits to specify that limit=0 means no limits
- Replace deprecated common.Hex with hexutil.Encode.
- Remove upstreamed 0010-geth-17-fix-npe-in-filter-system.patch.
- Remove upstreamed 0020-discv5-metrics.patch.
- Remove upstreamed 0026-ethdb-error-deadlock.patch.
- Update goleveldb to same version used by geth 1.8.11.
- Update PublicTransactionPoolAPI.GasPrice return type to match type in internal geth interface.
* refactor TestRequestMessageFromMailboxAsync to use s.requestHistoricMessages helper
* send p2pRequestResponseCode from mailserver
* send p2p message response to after sending all historic messages
* mailserver sends `whisper.NewSentMessage` as response
* add mailserver Client and p2pRequestAckCode watchers
* send event with envelopeFeed when p2pRequestAckCode is received
* test request completed event in tracker
* rename mailserver response events and code to RequestCompleteCode
* wait for mailserver response in e2e test
* use SendHistoricMessageResponse method name for mailserver response
* fix lint warnings
* add mailserver request expiration
* send mailserver response without envelope
* add `ttl` to Request struct in shhext_requestMessages
* test that tracker calls handler.MailServerRequestExpired
* add geth patch
* rename TTL to Timeout
* split tracker.handleEvent in multiple methods
Other changes:
* needed to patch that loop implementation in Discover V5 implementation in go-ethereum,
* fixed TestStatusNodeReconnectStaticPeers,
* fixed TestBackendAccountsConcurrently.
This change makes invalidation mechanism more aggressive. With a primary goal to invalidate short living nodes faster. In current setup any node that became known in terms of discovery will stay in this state until it will fail to respond to 5 queries. Removing them earlier from a table allows to reduce latency for finding required nodes.
The second change, one adds a version for discovery, separates status dht from ethereum dht.
After we rolled out discovery it became obvious that our boot nodes became spammed with irrelevant nodes. And this made discovery process very long, for example with separate dht discovery takes ~2s, with mutual dht - it can take 1m-10m and there is still no guarantee to find a max amount of peers, cause status nodes is a very small part of whole ethereum infra.
In my understanding, we don't need to be a part of ethereum dht, and lower latency is way more important for us.
Closes: #941
Partially closes: #960 (960 requires futher investigations on devices)
Now if Add is to be called it will be called before Wait, this is achieved
by doing following:
- if cancel() gets lock first and closes channelCh before spawnSync is called
we will exit right away
- if not than we will ensure that we hold a lock until syncers are spawned
so that cancel() will be blocked for this time and it will prevent whole Terminate() from
progressing
This change adds adds an ability to use different source of time for whisper:
when envelope is created it is used to set expiry
to track when envelope needs to be expired
This time is then used to check validity of the envelope when it is received. Currently If we receive an envelope that is sent from future - peer will get disconnected. If envelope that was received has an expiry less then now it will be simply dropped, if expiry is less than now + 10*2 seconds peer will get dropped.
So, it is clear that whisper depends on time. And any time we get a skew with peers that is > 20s reliability will be grealy reduced.
In this change another source of time for whisper will be used. This time source will use ntp servers from pool.ntp.org to compute offset. When whisper queries time - this offset will be added/substracted from current time.
Query is executed every 2 mins, queries 5 different servers, cut offs min and max and the computes mean value. pool.ntp.org is resolved to different servers and according to documentation you will rarely hit the same.
Closes: #687
* Rebase on 1.8.5
* Remove outdated patches and apply all others
* Use shh_post that returns hash
* Use bloom filter for request to mailserver
* Remove tests for sending messages without subbing first
* Fix deadlock in ethdb
* Expect null if receipt is not yet created
* Subscribe to messages before sending them in whisper test
* Add default peer limits configuration
If discovery is enabled for a given cluster - we will set a default
expected number of peers for each enabled service. For example:
- if cluster is rinkeby has a discovery enabled we will
check which services are enabled
- if whisper is enabled we will set min and max limits by default
- if les is enabled and infura is not used we will set limits too
When statusd is used - configuration must be provided using configuration
supported by statusd.
* Fix deadlock in les peer set
* Implement shh api extension that allows to confirm that message is sent
* Add a patch
* Fix linter
* Add readme
* Add tests for tracker
* Address review
* Add debug log to test package t
* Add comments for test restrictions
* Add explicit errors for mainnet
* Panic instead of error in case of mainnet during tests
* Now panic with illegal network
* Validate the compiler flag for mainnet
* Made test for unset mainnet explicit
* Forgot to use my flag
* Linter has troubles with unused field
* Add default network id
In e2e tests there's no default anymore in go code. So ensure in Makefile.
* Fix dumb syntax error
* CI needs build with Mainnet
* Explicit rebuild only for tests
* No more separation of mainnet and testnet builds
* Build flags now set in Makefile
* Update project to use Whisper v6. Part of #638
* Revert "Add patch to downgrade usage of Whisper v6 to v5 in some geth 1.8.1 vendor files. Part of #665" - this reverts commit 6aefb4c8fd02dbcfffac6b69e8bb22b13ef86b6b.
* Enable light mode on Whisper v6 for non-mail servers. Part of #638
* Fix race condition in whisperv6/peer.go. Part of #665 (PR already accepted upstream for 1.8.2)
* Update bootnode addresses in staticnodes.json. Part of #638
* Add `shh.lightclient` flag and tests for bloom filter setting logic. Part of #638
* Move MakeTestNodeConfig to utils. Part of #638
* Reduce PoW in `whisper_jail_test.go` to fix flaky test. Part of #638
* Update `github.com/ethereum/go-ethereum` package to 1.8.1 branch. Part of #638
* Fix code due to some signature changes. Part of #638
* use upstream for whisper backend
* Add patch to downgrade usage of Whisper v6 to v5 in some geth 1.8.1 vendor files. Part of #638
* Take into account the DNS rebinding protection introduced in 1.8.0 by adding exception for localhost. Part of #638
* Add patches required for cross-compiled builds starting with geth 1.8.0. Only applied during build. Part of #638
* Update expected JSON result in `TestRegressionGetTransactionReceipt()` and `TestCallRawResultGetTransactionReceipt()`. Part of #665
* Fix some failing e2e tests. Part of #638
* Address comments in PR #702. Part of #638
Improve patcher tool:
* fix broken `-p` flag,
* rename it to `-b`,
* add a new `-p` flag that allows specifying the source of the patches, so that it can be used for more than just go-ethereum patches,
* make it work correctly independently of the order that options are specified in the command line.
Jakub Sokołowski
Andrea Maria Piana
RichΛrd
Samuel Hawksby-Robinson
Adam Babik
Pedro Pombeiro
Jalil F
Adam Babik
Dmitry Shulyak
Jakub
Andrea Franz
Ivan Daniluk
Adam Babik
Adrià Cidre
Dmitry Shulyak
Igor Mandrigin
Evgeny Danienko
Frank Mueller
Igor Mandrigin
Caner Çıdam
Alex Kohler