There were a couple of issues on how we handle pinned messages:
1) Clock of the message was only checked when saving, meaning that the
client would receive potentially updates that were not to be
processed.
2) We relied on the client to generate a notification for a pinned
message by sending a normal message through the wire. This PR changes
the behavior so that the notification is generated locally, either on
response to a network event or client event.
3) When deleting a message, we pull all the replies/pinned notifications
and send them over to the client so they know that those messages
needs updating.
Adds a new column named `deleted` to the table `activity_center_notifications`.
Related PR in Mobile https://github.com/status-im/status-mobile/pull/15106 for a lot more details of the feature.
Why? Relying on the `dismissed` column for soft deletion is no longer viable because the mobile & desktop clients should display dismissed notifications (sometimes), hence the need for a new column to truly represent soft deletion.
A migration was added out-of-order, which meant that in clients who
had already run the migration after, it would be skip.
This commit re-adds the migration so it's run, tested against an empty
account and one that had already migrated.
* feat: Add seen/unseen activity center state
* feat: ActivityCenterState for grouping ActivityCenter unread messages cnt and seen state
* feat: always use messenger's addActivityCenterNotification & add state to the response
* Remove unused activity center endpoints form api and fix test
* feat(ActivityCenter): Add community request AC notification
* feat(ActivityCenter): Add CommunityID to AC notification
* feat(ActivityCenter): Add membership status for community membership AC notifications
* feat(ActivityCenter): Add tests for community notifications and fix naming
* Add notification for kicked from community action
* feat(ActivityCenter): Fix for missing notification objects for tests
Main changes:
- Extend saved addresses DB with sync info: sync timestamp, update timestamp
and soft removed flag
- Create custom protobuf message payload to sync saved addresses
- Cleanup saved addresses on each start of messenger, by deleting
soft removed older entries
- Sync all saved addresses on Messenger.SyncDevices calls
- Sync particular changes to saved addresses
- Add SavedAddressManager instance to messenger
- Note, can't find a clean way to pass the SavedAddressManager to the
messenger, so we create another one
- Add tests for sync and new DB API
Closes: #7229
Restore the old, previously renamed, 1662447680_add_keypairs_table.up.sql
file while keeping the current one for those who already migrated to the
new one. The extra migration is noop and saves to keep consistency in
the user data states history.
`FirstMessageTimestamp` enables members of the community to determine if
there are any messages they can fetch on the community channel(chat).
`FirstMessageTimestamp` is advertised by admin for each community chat
through `CommunityDescription`. It assumes admin is online frequently
enough to capture the first channel message.
For existing communities admin determines first message timestamp by
finding oldest chat message in its local database.
task: status-im/status-desktop#6731
Add image_payload column to chats table.
Add Base64Image to chat struct.
Add ImageChange event to propagate image.
Change EditChat API - use CroppedImage.
Process and crop image in EditGroupChat.
This introduces a new table to store discord message authors.
The main reason this table is being introduce is so that we don't have
to duplicate discord message author information in the `user_messages`
table when importing discord communities (ongoing work).
In addition to the table there are also two new APIs on the messenger
persistence layer (which are later used in the import logic):
- `HasDiscordMessageAuthor`
- `SaveDiscordMessageAuthor`
Closes#2759
As part of the new Discord <-> Status Community Import functionality,
we're adding an API that extracts all discord categories and channels
from a previously exported discord export file.
These APIs can be used in clients to show the user what categories and
channels will be imported later on.
There are two APIs:
1. `Messenger.ExtractDiscordCategoriesAndChannels(filesToimport
[]string) (*MessengerResponse, map[string]*discord.ImportError)`
This takes a list of exported discord export (JSON) files (typically one per
channel), reads them, and extracts the categories and channels into
dedicated data structures (`[]DiscordChannel` and `[]DiscordCategory`)
It also returns the oldest message timestamp found in all extracted
channels.
The API is synchronous and returns the extracted data as
a `*MessengerResponse`. This allows to make the API available
status-go's RPC interface.
The error case is a `map[string]*discord.ImportError` where each key
is a file path of a JSON file that we tried to extract data from, and
the value a `discord.ImportError` which holds an error message and an
error code, allowing for distinguishing between "critical" errors and
"non-critical" errors.
2. `Messenger.RequestExtractDiscordCategoriesAndChannels(filesToImport
[]string)`
This is the asynchronous counterpart to
`ExtractDiscordCategoriesAndChannels`. The reason this API has been
added is because discord servers can have a lot of message and
channel data, which causes `ExtractDiscordCategoriesAndChannels` to
block the thread for too long, making apps potentially feel like they
are stuck.
This API runs inside a go routine, eventually calls
`ExtractDiscordCategoriesAndChannels`, and then emits a newly
introduced `DiscordCategoriesAndChannelsExtractedSignal` that clients
can react to.
Failure of extraction has to be determined by the
`discord.ImportErrors` emitted by the signal.
**A note about exported discord history files**
We expect users to export their discord histories via the
[DiscordChatExporter](https://github.com/Tyrrrz/DiscordChatExporter/wiki/GUI%2C-CLI-and-Formats-explained#exportguild)
tool. The tool allows to export the data in different formats, such as
JSON, HTML and CSV.
We expect users to have their data exported as JSON.
Closes: https://github.com/status-im/status-desktop/issues/6690
This commit introduces a few changes regarding users accessing
communities:
While the APIs still exist, community invites should no longer be
used, instead communities should merely be "shared".
Sharing a community to users allows users to "join" the community,
which in reality makes them request access to that community.
This means, users have to request access to any community, even if
the community has permissions set to NO_MEMBERSHIP
Only difference between ON_REQUEST and NO_MEMBERSHIP is that
ON_REQUEST communities require manual approval of the owner/admin
to access a community. NO_MEMBERSHIP communities accept
automatically (as soon as owner/admin receives the request).
This also implies that users are no longer optimistically added to the
member list of communities, but only after they have been accepted.
This introduces a bit of a message ping-pong for users to know that
someone is now part of a community
fix: add verification request to response
fix: code review
add missing functions and simplify timestamp usage
fix: sync verification requests
feat: add endpoint to fetch all received verification requests
feat: add signal when trusting verification request
Co-authored-by: Jonathan Rainville <rainville.jonathan@gmail.com>
These APIs are being introduced to address #2706 and #2704, provided
that clients will move to using these APIs instead of the currently
provided equivalent APIs in the browser service.
The `bookmarks` table is being extended with a `deleted_at` field which
can later be used for garbage collection, as "removing" a bookmark is
merely soft deletion and doesn't actually remove the data from the
database.
In addition to those APIs adding and soft deleting bookmark entries,
they also automatically perform a sync operation to ensure that
bookmarks are synced in real-time (#2704).
Closes#2706, #2704
This commit introduces a new `clock` field in the
`communities_settings` table so that it can be leveraged for syncing
community settings across devices.
It alsoe exends existing `syncCommunity` APIs to generate
`SyncCommunitySettings` as well, avoiding sending additional sync messages
for community settings.
When editing communities however, we still sync community settings
explicitly are we aren't syncing the community itself in that case.
This allows to store community admin settings that are meant to be propagated
to community members (as opposed to the already existing
`CommunitySettings` which are considered local to every account).
The first setting introduced as part of this commit is one that enables
community admins to configure whether or not members of the community
are allowed to pin messages in community channels.
Prior to this commit, this was not restricted at all on the protocol
level and only enforced by clients via UI (e.g. members don't see an
option to pin messages, although they could).
This config setting now ensures that:
1. If turned off, members cannot send a pin message
2. If turned off, pin messages from members are not handled/processed
This is needed by https://github.com/status-im/status-desktop/issues/5662
This introduces the ability for status notes to handle community
history archive magnetlinks. To make this work, a few things are needed:
1. A new database table has been introduced to store message archive
hashes. This is necessary so status nodes can determine whether or
not they need to download a certain archive
2. The messenger's `handleRetrievedMessages()` has been exteded to take
magnetlink messages into account
3. New APIs were added to download torrent data given a magnetlink and
also to extract messages from downloaded archives, which are then
later fed to `handleRetrievedMessages`
Closes#2568
This introduces logic needed to:
- Create WakuMessageArchives and and indices from store waku messages
- History archive torrent data to disk and create .torrent file from
that
- Seed and unseed history archive torrents as necessary
- Starting/stopping the torrent client
- Enabling/disabling community history support for individual components
and starting/stopping the routine intervals accordingly
This does not yet handle magnet links (#2568)
Closes#2567
This is needed so that when they are bundled into archives, receiving
nodes can still verify the messages payload using its signature.
This commit introduces a new `waku_messages` table and APIs to store
such messages. Waku message payload is store for any message that has
a topic that matches any of the admin communities chats.
Closes#2566
* Sync Settings
* Added valueHandlers and Database singleton
Some issues remain, need a way to comparing incoming sql.DB to check if the connection is to a different file or not. Maybe make singleton instance per filename
* Added functionality to check the sqlite filename
* Refactor of Database.SaveSyncSettings to be used as a handler
* Implemented inteface for setting sync protobuf factories
* Refactored and completed adhoc send setting sync
* Tidying up
* Immutability refactor
* Refactor settings into dedicated package
* Breakout structs
* Tidy up
* Refactor of bulk settings sync
* Bug fixes
* Addressing feedback
* Fix code dropped during rebase
* Fix for db closed
* Fix for node config related crashes
* Provisional fix for type assertion - issue 2
* Adding robust type assertion checks
* Partial fix for null literal db storage and json encoding
* Fix for passively handling nil sql.DB, and checking if elem has len and if len is 0
* Added test for preferred name behaviour
* Adding saved sync settings to MessengerResponse
* Completed granular initial sync and clock from network on save
* add Settings to isEmpty
* Refactor of protobufs, partially done
* Added syncSetting receiver handling, some bug fixes
* Fix for sticker packs
* Implement inactive flag on sync protobuf factory
* Refactor of types and structs
* Added SettingField.CanSync functionality
* Addressing rebase artifact
* Refactor of Setting SELECT queries
* Refactor of string return queries
* VERSION bump and migration index bump
* Deactiveate Sync Settings
* Deactiveated preferred_name and send_status_updates
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
This commit introduces a new `TorrentConfig` as per #2563 with dedicated
default values and new options/flags for the status-go CLI.
Since it's part of `NodeConfig`, which is stored per user in the
database, this commit also adds a migration script that adds a new
`torrent_config` table and database APIs to insert and retreive the
torrent config.
Closes#2563
This commit enables mailserver cycle logic by default and make a few
changes:
1) Nodes are graylisted instead of being blacklisted for a set amount of
time. The reason is that if we blacklist, any cut in connectivity
might result in long delays before reconnecting, especially on spotty
connections.
2) Fixes an issue on the devp2p server, whereby the node would not
connect to one of the static nodes since all the connection slots
where filled. The fix is a bit inelegant, it always connects to
static nodes, ignoring maxpeers, but it's tricky to get it to work
since the code is clearly not written to select a specific node.
3) Adds support to pinned mailservers
4) Add retries to mailservers requests. It uses a closure for now, I
think we should eventually have a channel etc, but I'd leave that for
later.
* Protobufs and adapters
* Added basic anon metric service and config init
* Added fibonacci interval incrementer
* Added basic Client.Start func and integrated interval incrementer
* Added new processed field to app metrics table
* Added id column to app metrics table
* Added migration clean up
* Added appmetrics GetUnprocessed and SetToProcessedByIDs and tests
There was a wierd bug where metrics in the db that did not explicitly insert a value would be NULL, so could not be found by . In addition I've added a new primary id field to the app_metrics table so that updates could be done against very specific metric rows.
* Updated adaptors and db to handle proto_id
I need a way to distinguish individual metric items from each other so that I can ignore the ones that have been seen before.
* Moved incrementer into dedicated file
* Resolve incrementer test fail
* Finalised the main loop functionality
* Implemented delete loop framework
* Updated adaptors file name
* Added delete loop delay and quit, and tweak on RawMessage gen
* Completed delete loop logic
* Added DBLock to prevent deletion during mainLoop
* Added postgres DB connection, integrated into anonmetrics.Server
* Removed proto_id from SQL migration and model
* Integrated postgres with Server and updated adaptors
* Function name update
* Added sample config files for client and server
* Fixes and testing for low level e2e
* make generate
* Fix lint
* Fix for receiving an anonMetricBatch not in server mode
* Postgres test fixes
* Tidy up, make vendor and make generate
* delinting
* Fixing database tests
* Attempted fix of does: cannot open `does' (No such file or directory)
not: cannot open `not' (No such file or directory)
exist: cannot open `exist' (No such file or directory) error on sql resource loas
* Moved all anon metric postgres migration logic and sources into a the protocol/anonmetrics package or sub packages. I don't know if this will fix the does: cannot open `does' (No such file or directory)
not: cannot open `not' (No such file or directory)
exist: cannot open `exist' (No such file or directory) error that happens in Jenkins but this could work
* Lint for the lint god
* Why doesn't the linter list all its problems at once?
* test tweaks
* Fix for wakuV2 change
* DB reset change
* Fix for postgres db migrations fails
* More robust implementation of postgres test setup and teardown
* Added block for anon metrics functionality
* Version Bump to 0.84.0
* Added test to check anon metrics broadcast is deactivated
* Protobufs and adapters
* Added basic anon metric service and config init
* Added new processed field to app metrics table
* Added id column to app metrics table
* Added migration clean up
* Added appmetrics GetUnprocessed and SetToProcessedByIDs and tests
There was a wierd bug where metrics in the db that did not explicitly insert a value would be NULL, so could not be found by . In addition I've added a new primary id field to the app_metrics table so that updates could be done against very specific metric rows.
* Updated adaptors and db to handle proto_id
I need a way to distinguish individual metric items from each other so that I can ignore the ones that have been seen before.
* Added postgres DB connection, integrated into anonmetrics.Server
* Removed proto_id from SQL migration and model
* Integrated postgres with Server and updated adaptors
* Added sample config files for client and server
* Fix lint
* Fix for receiving an anonMetricBatch not in server mode
* Postgres test fixes
* Tidy up, make vendor and make generate
* Moved all anon metric postgres migration logic and sources into a the protocol/anonmetrics package or sub packages. I don't know if this will fix the does: cannot open `does' (No such file or directory)
not: cannot open `not' (No such file or directory)
exist: cannot open `exist' (No such file or directory) error that happens in Jenkins but this could work
Andrea Maria Piana
frank
Samuel Hawksby-Robinson
Ibrahem Khalil
Boris Melnik
Icaro Motta
Mikhail Rogachev
Stefan
Igor Sirotin
Parvesh Monu
Pascal Precht
Patryk Osmaczko
Michal Iskierko
Roman Volosovskyi
siddarthkay
Vitaliy Vlasov
Richard Ramos