Similar to `CheckPermissionToJoin()` we now get
a `CheckChannelPermissions()` API.
It will rely on the same `PermissionResponse` types, but gives
information about both `ViewOnlyPermissions` and
`ViewAndPostPermissions`.
This seems to be a bug that was introduced when two features, admin
permissions and "always reveal wallet accounts" where merged.
We need to make sure we **first** check the revealed accounts and only
**then** do we perform permission checks on them. Otherwise we can run
into scenarios where fake addresses are used and users will be accepted
to the community.
found
Turns out that, when we return with an error, instead of
a non-statisfied check permissions response, we can run into cases where
members that should be kicked are not kicked.
Change smart contract with new API.
Update gas amount for deployment.
Add Burn() and EstimateBurn() functions.
Add RemainingSupply() functions.
Issue #10816
This commit does a few things:
- Adds a migration that adds chainids to communities_request_to_join_revealed_addresses
- Removes RevealedAddress in favor of RevealedAccount which is now a struct that contains the revealed address, as well as the signature and a list of chain IDs on which to check for user funds
- Changes the logic of sending requests to join a community, such that after creating address signatures, the user node will also check which of the addresses has funds on which networks for the community's token permissions, and add the chainds to the RevealedAccount
- Updates checkPermissionToJoin() such that only relevant chainids are used when checking user's funds. Chain IDs are retrieved from RevealedAccounts and matched against token permission criteria chain IDs
* chore(upgradeSQLCipher): Upgrading SQLCipher to version 5.4.5
Changes:
### github.com/mutecomm/go-sqlcipher
1. The improved crypto argorighms from go-sqlcipher v3 are merged in v4
Tags:
v4.4.2-status.1 - merge `burn_stack` improvement
v4.4.2-status.2 - merge `SHA1` improvement
v4.4.2-status.4- merge 'AES' improvement
2. Fixed `go-sqlcipher` to support v3 database in compatibility mode (`sqlcipher` already supports this) (Tag: v4.4.2-status.3)
3. Upgrade `sqlcipher` to v5.4.5 (Tag: v4.5.4-status.1)
### github.com/status-im/migrate/v4
1. Upgrade `go-sqlcipher` version in `github.com/status-im/migrate/v4`
### status-go
1. Upgrade `go-sqlcipher` and `migrate` modules in status-go
2. Configure the DB connections to open the DB in v3 compatibility mode
* chore(upgradeSQLCipher): Use sqlcipher v3 configuration to encrypt a plain text database
* chore(upgradeSQLCipher): Scanning NULL BLOB value should return nil
Fixing failing tests: TestSyncDeviceSuite/TestPairingSyncDeviceClientAsReceiver; TestSyncDeviceSuite/TestPairingSyncDeviceClientAsSender
Considering the following configuration:
1. Table with BLOB column has 1 NULL value
2. Query the value
3. Rows.Scan(&dest sql.NullString)
Expected: dest.Valid == false; dest.String == nil
Actual: dest.Valid == true; dest.String == ""
* chore: Bump go-sqlcipher version to include NULL BLOB fix
* fix(community): stop re-joining comm when receiving a sync community msg
Fixes an issue with chats being reset. Since joining a community resaves the chats with the synced default value, it resets the sate of the chats, losing the unread messages, the muted state and more.
The solution is to block the re-joining of the community. In the case of the sync, we catch that error and just continue on.
* fix(import): fix HandleImport not saving the chat
Doesn't change much, but it could have caused issues in the future, so since we might have modified the chat, we make sure to save them
Also adds a test
* fix tests
This commit does a few things:
1) Extend create/import account endpoint to get wallet config, some of
which has been moved to the backend
2) Set up a loop for retrieving balances every 10 minutes, caching the
balances
3) Return information about which checks are not passing when trying to
join a token gated community
4) Add tests to the token gated communities
5) Fixes an issue with addresses not matching when checking for
permissions
The move to the wallet as a background task is not yet complete, I need
to publish a signal, and most likely I will disable it before merging
for now, as it's currently not used by desktop/mobile, but the PR was
getting to big
* Community request to join changes
* Fix read state for request to join notification
* Bring back deleted notification when updated with response
* Update Request timeout to 7 days
* Update VERSION
This adds an additional check for collectibles when community
permissions are validated.
Specifically this uses opensea to request all NFTs given an
owner wallet and a list of contract addresses (collectibles).
When community owners accept pending requests manually, they would be
declined in that process if the request doesn't fullfill the required
token permission criteria.
We don't want this to automatically reject those requests anymore,
instead, owners have to manually reject the requests.
When a community permission is edited, we need to revalidate
the token criteria with the existing member list, as members might
no longer fulfill the requirements.
This commit runs the checks in a go routine after the permission has
been updated.
This adds checks to `HandleCommunityRequestToJoin` and
`AcceptRequestToJoinCommunity` that ensure a given user's revealed
wallet addresses own the token funds required by a community.
When community has token permissions of type `BECOME_MEMBER`, the
following happens when the owner receives a request:
1. Upon verifying provided wallet addresses by the requester, the owner
node accumulates all token funds related to the given wallets that
match the token criteria in the configured permissions
2. If the requester does not meet the necessary requirements, the
request to join will be declined. If the requester does have the
funds, he'll either be automatically accepted to the community, or
enters the next stage where an owner needs to manually accept the
request.
3. The the community does not automatically accept users, then the funds
check will happen again, when the owner tries to manually accept the
request. If the necessary funds do not exist at this stage, the
request will be declined
4. Upon accepting, whether automatically or manually, the owner adds the
requester's wallet addresses to the `CommunityDescription`, such that
they can be retrieved later when doing periodic checks or when
permissions have changed.
This commit extends the `CommunityRequestToJoin` with `RevealedAddresses` which represent wallet addresses and signatures provided by the sender, to proof a community owner ownership of those wallet addresses.
**Note: This only works with keystore files maanged by status-go**
At high level, the follwing happens:
1. User instructs Status to send a request to join to a community. By adding a password hash to the instruction, Status will try to unlock the users keystore and verify each wallet account.
2. For every verified wallet account, a signature is created for the following payload, using each wallet's private key
``` keccak256(chatkey + communityID + requestToJoinID) ``` A map of walletAddress->signature is then attached to the community request to join, which will be sent to the community owner
3. The owner node receives the request, and if the community requires users to hold tokens to become a member, it will check and verify whether the given wallet addresses are indeed owned by the sender. If any signature provided by the request cannot be recovered, the request is immediately declined by the owner.
4. The verified addresses are then added to the owner node's database such that, once the request should be accepted, the addresses can be used to check on chain whether they own the necessary funds to fulfill the community's permissions
The checking of required funds is **not** part of this commit. It will be added in a follow-up commit.
The `Edit()` method on `Community` merely updates "primitive" values
that live inside a community description. For any data that is more complex,
we typically have dedicated methods.
Because `Edit()` was expecting `CommunityTokensMetadata`, it would
override it with empty data every time we would edit a community.
This is because we typically don't update that kind of data as part
of `Edit()`.
In addition, `CommunityTokensMetadata` is append-only anyways,
so there wouldn't be any other way to update that field, other than
adding new items to it, which is done in a dedicated method.
Community tokens has some metadata (image, description) which must be kept in waku(CommunityDescription).
Add CommunityTokenMetadata message to communities.proto.
Add []CommunityTokenMetadata to CommunityDescription.
Issue #9545
In general, any time a piece of state is updated in the backend, that
should be propagated to the client through signals.
In this case, when a request was accepted, the client wasn't notified,
requiring them to re-fetch the accepted requests and causing
inconsistent state between status-go and client.
This commit refactors the discord import tool such that,
instead of loading all data to be imported into memory at
once, it will now perform the import on a per file basis.
This improves the memory pressure for the node performing
the import and seems to increase its performance as well.
There were cases where this caused a crash, as handling magnetlinks would try to close
an already closed tasked channel
See https://github.com/status-im/status-desktop/issues/8996 for more information.
This commit extends the task struct such that it can be marked as cancelled and safely
read and written by multiple go routines.
This introduces an addition constraint to archive generation, in which the payload + signature size of all partitioned message that go into an archive should not exceed a certain
threshold.
This is to ensure that archives won't get too big when they are later read into memory.
Instead of loading the entire torrent file into memory when trying
to extrract active messages, we now only read the chunks that are
necessary to decode any individual archive and then process
extracted messages in chunks.
This doesn't introduce a max cap of allowed memory yet, since the
chunk size depends entirely on the size of the archive, but this
will be done soon.
This commit makes a few changes to the community history archive
download routine to make it more robust:
1. Prior to this commit, even when there were no archives to be
downloaded, we were still trying to extract messages from archive
data.
2. Logs have been improved as they were sometimes showing confusing
information
3. We now handle interruption of ongoing download + data import much
better in case of multiple magnetlinks being processed in roughly the
same time.
4. We now keep track of which archive has been successfully imported
into the database. Without this, Status would consider any downloaded
archives as "done" even though they haven't actually been imported
into the database yet. This way Status should be able to pick up its
work were it left of the last time, in case a user closes the app, or
another magnetlink interrupts the ongoing process.
Pascal Precht
Boris Melnik
Mikhail Rogachev
Michal Iskierko
Mykhailo Prakhov
Alex Jbanca
Patryk Osmaczko
Jonathan Rainville
Andrea Maria Piana
osmaczko
mprakhov
Mohamed Javid
Anthony Laibe
Richard Ramos
Pascal Precht