This is needed so that when they are bundled into archives, receiving
nodes can still verify the messages payload using its signature.
This commit introduces a new `waku_messages` table and APIs to store
such messages. Waku message payload is store for any message that has
a topic that matches any of the admin communities chats.
Closes#2566
* Sync Settings
* Added valueHandlers and Database singleton
Some issues remain, need a way to comparing incoming sql.DB to check if the connection is to a different file or not. Maybe make singleton instance per filename
* Added functionality to check the sqlite filename
* Refactor of Database.SaveSyncSettings to be used as a handler
* Implemented inteface for setting sync protobuf factories
* Refactored and completed adhoc send setting sync
* Tidying up
* Immutability refactor
* Refactor settings into dedicated package
* Breakout structs
* Tidy up
* Refactor of bulk settings sync
* Bug fixes
* Addressing feedback
* Fix code dropped during rebase
* Fix for db closed
* Fix for node config related crashes
* Provisional fix for type assertion - issue 2
* Adding robust type assertion checks
* Partial fix for null literal db storage and json encoding
* Fix for passively handling nil sql.DB, and checking if elem has len and if len is 0
* Added test for preferred name behaviour
* Adding saved sync settings to MessengerResponse
* Completed granular initial sync and clock from network on save
* add Settings to isEmpty
* Refactor of protobufs, partially done
* Added syncSetting receiver handling, some bug fixes
* Fix for sticker packs
* Implement inactive flag on sync protobuf factory
* Refactor of types and structs
* Added SettingField.CanSync functionality
* Addressing rebase artifact
* Refactor of Setting SELECT queries
* Refactor of string return queries
* VERSION bump and migration index bump
* Deactiveate Sync Settings
* Deactiveated preferred_name and send_status_updates
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
This commit introduces a new `TorrentConfig` as per #2563 with dedicated
default values and new options/flags for the status-go CLI.
Since it's part of `NodeConfig`, which is stored per user in the
database, this commit also adds a migration script that adds a new
`torrent_config` table and database APIs to insert and retreive the
torrent config.
Closes#2563
This commit enables mailserver cycle logic by default and make a few
changes:
1) Nodes are graylisted instead of being blacklisted for a set amount of
time. The reason is that if we blacklist, any cut in connectivity
might result in long delays before reconnecting, especially on spotty
connections.
2) Fixes an issue on the devp2p server, whereby the node would not
connect to one of the static nodes since all the connection slots
where filled. The fix is a bit inelegant, it always connects to
static nodes, ignoring maxpeers, but it's tricky to get it to work
since the code is clearly not written to select a specific node.
3) Adds support to pinned mailservers
4) Add retries to mailservers requests. It uses a closure for now, I
think we should eventually have a channel etc, but I'd leave that for
later.
* Added community sync protobuf
* Updated community sync send logic
* Integrated syncCommunity handling
* Added synced_at field and tidied up some other logic
* persistence testing
* Added testing and join functionality
* Fixed issue with empty scan params
* Finshed persistence tests for new db funcs
* Midway debug of description not persisting after sync
* Resolved final issues and tidied up
* Polish
* delint
* Fix error not handled on SetPrivateKey
* fix infinite loop, again
* Added muted option and test fix
* Added Muted to syncing functions, not just in persistence
* Fix bug introduced with Muted property
* Added a couple of notes for future devs
* Added most of the sync RequestToJoin functionality
Tests need to be completed and tests are giving some errors
* Finished tests for getJoinedAndPending
* Added note
* Resolving lint
* Fix of protobuf gen bug
* Fixes to community sync tests
* Fixes to test
* Continued fix of e2e
* Final fix to e2e testing
* Updated migration position
* resolve missing import
* Apparently the linter spellchecks
* Fix bug from #2276 merge
* Bug fix for leaving quirkiness
* Addressed superfluous MessengerResponse field
* Addressed feedback
* VERSION bump
This commit adds a setting for mailserver, that allows the client to
specify the syncing period.
Also fixes a minor issue with deletion of public chats.
This property is useful for clients to know when a channel or chat
was joined so they can use that to calculate the order of channels
and chats shown in applications.
Changes include a new joined property on the Chat struct,
as well as adjustments in the persistence layer to retreive and
update chat data in the database.
In addition there's a migration script that alters the existing
chat table to introduce a new column for the joined field.
It also updates all existing rows in the database to set `joined`
to `0`.
* Added anon metrics send opt in setting
* resolved rebase conflict, renamed migration to use unixtimestamp
Theres always conflicts with migrations using sequential numbers, less so with unix timestamp
* Add extra event to capture other type of navigations, allow empty screen name, rename cofx to get rid of clj ns, update tests
* Some view ids are greater than 16 characters. Made it 32 to be safe.
* Tab navigation events occur outside nav, add a new validator for them
* Remove navigate to cofx event, capture screens on will focus, get rid of enum and make valid screens a string less than 32 characters
* Run make generate
* Fix test
* Bump version to 0.75.1
Sometimes eth_getBlockByNumber returns txs with chainId which is not
equal to chanin's id. That caused an error and tx fetching was
interrupted. From now on such txs will be skipped.
* Migrations in place, how to run them?
* Remove down migrations and touch database.go
* Database and Database Test package in place, added functions to get and store app metrics
* make generate output
* Minor bug fix on app metrics insert and select
* Add a validation layer to restrict what can be saved in the database
* Make validation more terse, throw error if schema doesn't exist, expose appmetrics service
* service updates
* Compute all errors before sending them out
* Trying to bring a closjure to appmetrics go
* Expose appmetrics via an api, skip fancy
* Address value as Jason Dawt Rawmasage to ease parsing
* Introduce a buffered chan with magic cap of 8 to minimize writes to DB. Tests for service and API. Also expose GetAppMetrics function.
* Lint issues
* Remove autoincrement, undo waku.json changes, fix error being shadowed, return nil where nil ought to be returned, get rid of buffered channel
* Bump migration number
* Fix API factory usage
* Add comment re:json.RawMessage instead of strings
* Get rid of test vars, throw save error inside the loop
* Update version
Co-authored-by: Samuel Hawksby-Robinson <samuel@samyoul.com>
This commit expands the confirmation mechanism to allow private group
chat messages to be confirmed:
Changes:
- Added a separate table for message confirmations as group chat
messages have same messageID but multiple datasyncID
- Removed DataSyncID from raw message (I haven't removed the column name
as it can't be done in sqlite without copying over the table)
There was a bug on status-react where it would save filters that were
not listened to.
This commit adds a task to clean up those filters as they might result
in long syncing times.
This commit also returns topics/ranges/mailserves from messenger in
order to make the initialization of the app simpler and start moving
logic to status-go.
It also removes whisper from vendor.
* Add status-option code
This commits changes the behavior of waku introducing a new status-code,
`2`, that replaces the current single options codes.
* linting
Storing absolute path for different configs breaks compatibility on iOS
as app's dir is changed after upgrade. The solution is to store relative
paths and to concatenate it with `backend.rootDataDir`. The only
exception is `LogFile` as it is stored outside `backend.rootDataDir` on
Android. `LogDir` config was added to allow adding of custom dir for log
file.
Configs concerned:
`DataDir`
`LogDir`
`LogFile`
`KeystoreDir`
`BackupDisabledDataDir`
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
Move settings table schema from a key-value store to a one row table with many columns.
We now save the first row with initial data in saveAccountAndLogin and follow up saveSetting calls are only saving one setting at a time.
Co-authored-by: Adam Babik <a.babik@designfortress.com>
Account's address was used as a primary key in accounts db and as a
deterministic id of an account in some API calls. Also it was used as a
part of the name of the account specific database. This revealed some
extra information about the account and wasn't necessary.
At first the hash of the address was planned to be used as a
deterministic id, but we already have a keyUid which is calculated as
sha256 hash of account's public key and has similar properties:
- it is deterministic
- doesn't reveal accounts public key or address in plain
* Use a single Message type `v1/message.go` and `message.go` are the same now, and they embed `protobuf.ChatMessage`
* Use `SendChatMessage` for sending chat messages, this is basically the old `Send` but a bit more flexible so we can send different message types (stickers,commands), and not just text.
* Remove dedup from services/shhext. Because now we process in status-protocol, dedup makes less sense, as those messages are going to be processed anyway, so removing for now, we can re-evaluate if bringing it to status-go or not.
* Change the various retrieveX method to a single one:
`RetrieveAll` will be processing those messages that it can process (Currently only `Message`), and return the rest in `RawMessages` (still transit). The format for the response is:
`Chats`: -> The chats updated by receiving the message
`Messages`: -> The messages retrieved (already matched to a chat)
`Contacts`: -> The contacts updated by the messages
`RawMessages` -> Anything else that can't be parsed, eventually as we move everything to status-protocol-go this will go away.
* WIP accounts implementation
* Accounts datasore and changes to status mobile API
* Add library changes and method to update config
* Handle error after account selection
* Add two methods to start account to backend
* Use encrypted database for settings and add a service for them
* Resolve linter warning
* Bring back StartNode StopNode for tests
* Add sub accounts and get/save api
* Changes to accounts structure
* Login use root address and fetch necessary info from database
* Cover accounts store with tests
* Refactor in progress
* Initialize status keystore instance before starting ethereum node
* Rework library tests
* Resolve failures in private api test and send transaction test
* Pass pointer to initialized config to unmarshal
* Use multiaccounts/accounts naming consistently
Multiaccount is used as a login identifier
Account references an address and a key, if account is not watch-only.
* Add login timestamp stored in the database to accounts.Account object
* Add photo-path field for multiaccount struct
* Add multiaccoutns rpc with updateAccount method
Update to any other account that wasn't used for login will return an error
* Fix linter in services/accounts
* Select account before starting a node
* Save list of accounts on first login
* Pass account manager to accounts service to avoid selecting account before starting a node
* Add logs to login with save and regualr login
This commit moves envelopes tracking to status-go.
Post endpoint is not going to track envelopes anymore, as that's taken
care on status-protocol-go side, so this is a breaking change, and
version is updated accordingly.
* multi-account login and signing
put methods count threshold back to 20
* validate login params
* refactoring
* use common.Address
* remove unused var in test
* add multiaccount support
add multi account ImportPrivateKey and StoreAccount
test derivation from normal keys
* add multiaccount to mobile pkg
* use multiaccount params structs from the mobile pkg
* move multiaccount tests together with the other lib tests
* fix codeclimate warning and temporarily increase methods threshold
* split library_test_utils.go to avoid linter warnings
* Store tx and receipt in db and cast it to TransferView on read
* Store Log instead of log index
* Use contract from log and bring back address field
* Add tx status and id fields
[services/wallet] Several changes in API after feedback
- Timestamp from block header stored in blocks table and added to each transfers
- From field is computed from signature to offload this computation from client side
- `history` event is added back, so that client can ignore historical blocks when watching
only for new blocks
- block number and timestamp are marshalled in hex. consistent with ethereum data structures
This commit add topic negotiation to the protocol.
On receiving a message from a client with version >= 1, we will generate
a shared key using Diffie-Hellman. We will record also which
installationID has sent us a message.
This key will be passed back to the above layer, which will then use to
start listening to a whisper topic (the `chat` namespace has no
knowledge of whisper).
When sending a message to a set of InstallationIDs, we check whether we
have agreed on a topic with all of them, and if so, we will send on this
separate topic, otherwise we fallback on discovery.
This change is backward compatible, as long as there is no downgrade of
the app on the other side.
A few changes:
* Factored out the DB in a separate namespace as now it is
being used by multiple services (TopicService and EncryptionService).
* Factored out multidevice management in a separate namespace
* Moved all the test to test the whole protoocl rather than just the encryption service
* Moved all the filter management in status-go
* Split shhext.tracker into envelopes and mail monitors
* Send envelopes on every new attempt to deliver a message
* Re-send user payloads if previous envelopes weren't acknowledged
* Remove debug api across the codebase
* select account decrypting wallet and chat keys
* adapt account tests to use chat and wallet account/keys
* fix tests using chat address
* changes after review
* fix status service e2e tests
* add account.Info struct returned when creating and recovering an account
* use s.EqualValues to compare recovered accounts
* return Info instead of *Info
* add both address and walletAddress to responses
* Update lib/types.go
Co-Authored-By: gravityblast <andrea@gravityblast.com>
* Update lib/types.go
Co-Authored-By: gravityblast <andrea@gravityblast.com>
* update comment to fix lint
Pascal Precht
Samuel Hawksby-Robinson
Andrea Maria Piana
Parvesh Monu
Roman Volosovskyi
Jonathan Rainville
Brian Sztamfater
Richard Ramos
Brian Sztamfater
Pascal Precht
Shivek Khurana
Volodymyr Kozieiev
Adam Babik
Pedro Pombeiro
Adam Babik
yenda
André Medeiros
dmitry
Andrea Franz
Ivan Daniluk