Otherwise we can't run tests in parallel on the same host. Also the
container name has to be different depending on executor.
Resolves errors like:
```
docker: Error response from daemon: Conflict.
The container name "/status-go-test-db" is already in use by container "123...".
You have to remove (or rename) that container to be able to reuse that name.
```
Resolves: https://github.com/status-im/status-go/issues/4040
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Linting tools should already be installed by Nix, and we should use
them.
Also switching most shells to pure mode to see what happens.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
The test running time can be a bit unpredictable due to server load,
which can result in tests that finish in 5 minutes, or over 20.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Using `sandbox: false` for `nix.shell()` call to avoid failures in
Xcode wrapper derivation due to missing permissions:
```
error: builder for '/nix/store/xxx-xcode-wrapper-14.3.drv' failed with exit code 1;
last 2 log lines:
> /nix/store/yyy-stdenv-darwin/setup: line 1391: /nix/store/yyy-xcode-wrapper-14.3/bin/xcodebuild: Operation not permitted
> We require xcodebuild version: 14.3
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This way we can easily build an image for `spiff-workflow` for example:
```
make docker-image BUILD_TARGET=spiff-workflow DOCKER_IMAGE_NAME=statusteam/spiff-workflow
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Otherwise we end up with leftover containers hanging around:
```
admin@linux-03.he-eu-hel1.ci.devel:~ % d ps -a
CONTAINER ID NAMES IMAGE CREATED STATUS
6c683f3083bf boring_yonath postgres:9.6-alpine 20 minutes ago Created
b3d462925a91 dazzling_albattani postgres:9.6-alpine 7 days ago Created
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Installing the SDK via Ansible is prone to error and not exactly
reproduceable. This way we can also track the exact tooling version as
used in Status Mobile app:
https://github.com/status-im/status-mobile/blob/develop/nix/pkgs.nix
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Not sure why that was added at some point, but it doesn't seem
necessary, and even if it was `go install` should be used.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Otherwise it fails with:
```
build github.com/status-im/status-go/cmd/statusd: cannot load github.com/lucas-clemente/quic-go/internal/qtls: no Go source files
```
We also add missing `g++` compiler for `go-libutp` to fix:
```
go build github.com/anacrolix/go-libutp: g++: exec: "g++": executable file not found in $PATH
```
As well as install `libgcc` and `libstdc++` to avoids failures like this:
```
Error loading shared library libstdc++.so.6: No such file or directory (needed by /usr/local/bin/statusd)
Error loading shared library libgcc_s.so.1: No such file or directory (needed by /usr/local/bin/statusd)
Error relocating /usr/local/bin/statusd: _Znwm: symbol not found
Error relocating /usr/local/bin/statusd: _ZdlPvm: symbol not found
Error relocating /usr/local/bin/statusd: _Unwind_Resume: symbol not found
Error relocating /usr/local/bin/statusd: __gxx_personality_v0: symbol not found
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Otherwise Go version upgrades are a pain due to randomly hitting a host
with newer version of Go compiler.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This fixes a type of CI failure:
https://ci.status.im/job/status-go/job/manual/1010
Which results in:
```
java.lang.NoSuchMethodError: No such DSL method 'suffix' found among steps ...
```
Also use release functions provided by `status-jenkins-lib`.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Using latest version every time is just asking for weird random issues.
This commit in `gomobile` has made Go `1.16` required:
80cb72e7af
Since we upgarded Go to 1.16 on CI hosts we can now use the recommended
method of installing tools, which is using `go install`.
In addition to that I've pinned other tools that we install to specific
versions, and dropped use of `modvendor` fork thanks to merging of:
https://github.com/goware/modvendor/pull/13
Signed-off-by: Jakub Sokołowski <jakub@status.im>
* feat: enable wallet without network binding
* feat: make transfer network aware
* feat: allow to pass initial networks via config
* fix: nil check and feed
* feat: Add documentation with better function name
* fix: do not init the manager more than once
* fix: PR feedbacks
* Bump version
* Update Jenkinsfile.tests
* Convert int to string
Co-authored-by: RichΛrd <info@richardramos.me>
The `--retry-all-errors` flag was added only in Curl `7.71.0`:
https://github.com/curl/curl/commit/b995bb58
So it fails on older distrubutions with:
```
curl: option --retry-all-errors: is unknown
curl: try 'curl --help' or 'curl --manual' for more information
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
It appears it is being used by Rendezvous, and if that protocol is not
being used there is no need to set `AdvertiseAddr` either.
I also adjusted all the `Makefile`s to not depend on `PUBLIC_IP` variable.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Since we've broken LibP2P communication with our Rendezvous nodes
somewhere after `v0.79.11` we should not enable it by defaults since it
generates errors like these:
```
failed to dial 16Uiu2...d687e4: all dials failed
failed to negotiate security protocol: protocol not supported
```
Since normal bootnodes are defined as well as a list of static nodes
there should not be a need for using Rendezvous as well.
Resolves: https://github.com/status-im/status-go/issues/2309
Signed-off-by: Jakub Sokołowski <jakub@status.im>
* Adding wakunode module
* Adding wakuv2 fleet files
* Add waku fleets to update-fleet-config script
* Adding config items for waku v2
* Conditionally start waku v2 node depending on config
* Adapting common code to use go-waku
* Setting log level to info
* update dependencies
* update fleet config to use WakuNodes instead of BootNodes
* send and receive messages
* use hash returned when publishing a message
* add waku store protocol
* trigger signal after receiving store messages
* exclude linting rule SA1019 to check deprecated packages
* wip
* file rename
* Adding postgres docker to jenkins test
* update and fix to jenkins file
* More fixing
* tinker
* more tinkering
* agent in stage
* agent in stage fix
* Integrated Andrea's Docker compose work
* Rework to include dockerfile into jenkins unit test
* Customer dockerfile agent
* Change to ENTRYPOINT
* No dir() in Unit Tests
* Removal dir property of dockerfile
* Added lable to agent.dockerfile
* agent set only at stage level
* Added Jakub's suggestion
* removed stage level agent
* replaced docker host name with default 127.0.0.1
* Fix of old NewWhisperEnvelope
* removed user and password settings from postgres connection
* Set explicit postgres user and password
* Change postgres creds to be more generic
* Removed unneeded docker files
* POSTGRES_HOST_AUTH_METHOD because we hate passwords
* chicken chicken chicken
* indents 2 spaces
This should fix issues with re-running builds while skipping some initial stages.
Also removes two libraries we made use of before.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Using `latest` tag is dangerous for non-technical users.
And updating `latest` tag willy-nilly is also bad.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Why make this change?
We are adding support of audio recorded files, similarly to how we did
with images
What has changed?
- Added protobuf definition, only AAC supported
- Added migrations to store files
- Fixed an issue with nil pointer when transaction would fail to be
created, causing the application to crash
This commit adds support for images in protobuf messages.
The client can specify a path which will be used to load the image
and set the corresponding fields.
This makes the assumption that the RCP server runs on the same machine
as the client and they have access to the same files. This holds
currently for both status-react and status-console-client, we could
revisit and adds an upload if that changes in the future.
It was going to be used as proxy from discv5 to rendezvous for les nodes.
We are not using it at the moment, and not clear when we will be using it
and if we are going to use it all.
Additionally it has some memory leaks that need to be fixed, so it is better
to remove it for now and restore once/if we will need it again.
- Replace command line flags with `-c` config flag. Part of #1180
- Convert node config private keys to hex-encoded string versions.
- Remove `GenerateConfig` from library.
- Remove unused `FirebaseConfig` from library.
- Fix loading of `config/status-chain-genesis.json` in non-dev machines.
* Update to geth v1.8.14
* Remove patches that were merged upstream
* Apply patches before 0016
* Fix 0016 and apply it
* Apply everything else
* Pass gas limit as a second argument to simulated backend
Ivan Belyakov
Jakub Sokołowski
Anton Iakimov
Igor Sirotin
Andrea Maria Piana
frank
Siddarth Kumar
RichΛrd
Samuel Hawksby-Robinson
yqrashawn
Anthony Laibe
Adam Babik
Pedro Pombeiro
Jalil F
Adam Babik
Dmitry Shulyak
Jakub
Andrea Franz
Ivan Daniluk
Adam Babik