Remove FCM implementation

This commit is contained in:
Pedro Pombeiro 2019-11-15 17:25:12 +01:00 committed by Pedro Pombeiro
parent 009778929b
commit 6ce437255e
19 changed files with 8 additions and 1764 deletions

View File

@ -223,7 +223,6 @@ mock-install: ##@other Install mocking tools
go get -u github.com/golang/mock
mock: ##@other Regenerate mocks
mockgen -package=fcm -destination=notifications/push/fcm/client_mock.go -source=notifications/push/fcm/client.go
mockgen -package=fake -destination=transactions/fake/mock.go -source=transactions/fake/txservice.go
mockgen -package=status -destination=services/status/account_mock.go -source=services/status/service.go
mockgen -package=peer -destination=services/peer/discoverer_mock.go -source=services/peer/service.go

View File

@ -27,7 +27,6 @@ import (
"github.com/status-im/status-go/multiaccounts"
"github.com/status-im/status-go/multiaccounts/accounts"
"github.com/status-im/status-go/node"
"github.com/status-im/status-go/notifications/push/fcm"
"github.com/status-im/status-go/params"
"github.com/status-im/status-go/rpc"
accountssvc "github.com/status-im/status-go/services/accounts"
@ -44,8 +43,6 @@ import (
)
const (
//todo(jeka): should be removed
fcmServerKey = "AAAAxwa-r08:APA91bFtMIToDVKGAmVCm76iEXtA4dn9MPvLdYKIZqAlNpLJbd12EgdBI9DSDSXKdqvIAgLodepmRhGVaWvhxnXJzVpE6MoIRuKedDV3kfHSVBhWFqsyoLTwXY4xeufL9Sdzb581U-lx"
contractQueryTimeout = 1000 * time.Millisecond
)
@ -73,7 +70,6 @@ type StatusBackend struct {
multiaccountsDB *multiaccounts.Database
accountManager *account.Manager
transactor *transactions.Transactor
newNotification fcm.NotificationConstructor
connectionState connectionState
appState appState
log log.Logger
@ -88,16 +84,14 @@ func NewStatusBackend() *StatusBackend {
accountManager := account.NewManager()
transactor := transactions.NewTransactor()
personalAPI := personal.NewAPI()
notificationManager := fcm.NewNotification(fcmServerKey)
rpcFilters := rpcfilters.New(statusNode)
return &StatusBackend{
statusNode: statusNode,
accountManager: accountManager,
transactor: transactor,
personalAPI: personalAPI,
rpcFilters: rpcFilters,
newNotification: notificationManager,
log: log.New("package", "status-go/api.StatusBackend"),
statusNode: statusNode,
accountManager: accountManager,
transactor: transactor,
personalAPI: personalAPI,
rpcFilters: rpcFilters,
log: log.New("package", "status-go/api.StatusBackend"),
}
}
@ -898,28 +892,6 @@ func (b *StatusBackend) startWallet() error {
new(big.Int).SetUint64(b.statusNode.Config().NetworkID))
}
// SendDataNotification sends data push notifications to users.
// dataPayloadJSON is a JSON string that looks like this:
// {
// "data": {
// "msg-v2": {
// "from": "0x2cea3bd5", // hash of sender (first 10 characters/4 bytes of sha3 hash)
// "to": "0xb1f89744", // hash of recipient (first 10 characters/4 bytes of sha3 hash)
// "id": "0x872653ad", // message ID hash (first 10 characters/4 bytes of sha3 hash)
// }
// }
// }
func (b *StatusBackend) SendDataNotification(dataPayloadJSON string, tokens ...string) error {
log.Debug("sending data push notification")
err := b.newNotification().Send(dataPayloadJSON, tokens...)
if err != nil {
b.log.Error("SendDataNotification failed", "dataPayloadJSON", dataPayloadJSON, "error", err)
}
return err
}
// InjectChatAccount selects the current chat account using chatKeyHex and injects the key into whisper.
func (b *StatusBackend) InjectChatAccount(chatKeyHex, encryptionKeyHex string) error {
b.mu.Lock()

7
go.mod
View File

@ -4,14 +4,13 @@ go 1.13
replace github.com/ethereum/go-ethereum v1.9.5 => github.com/status-im/go-ethereum v1.9.5-status.4
replace github.com/NaySoftware/go-fcm => github.com/status-im/go-fcm v1.0.0-status
replace github.com/Sirupsen/logrus v1.4.2 => github.com/sirupsen/logrus v1.4.2
replace github.com/docker/docker => github.com/docker/engine v1.4.2-0.20190717161051-705d9623b7c1
replace github.com/gomarkdown/markdown => github.com/status-im/markdown v0.0.0-20191113114344-af599402d015
require (
github.com/NaySoftware/go-fcm v0.0.0-00010101000000-000000000000
github.com/beevik/ntp v0.2.0
github.com/btcsuite/btcd v0.0.0-20191011042131-c3151ef50de9
github.com/btcsuite/btcutil v0.0.0-20190425235716-9e5f4b9a998d
@ -44,5 +43,3 @@ require (
gopkg.in/go-playground/validator.v9 v9.29.1
gopkg.in/natefinch/lumberjack.v2 v2.0.0
)
replace github.com/gomarkdown/markdown => github.com/status-im/markdown v0.0.0-20191113114344-af599402d015

2
go.sum
View File

@ -586,8 +586,6 @@ github.com/status-im/doubleratchet v3.0.0+incompatible h1:aJ1ejcSERpSzmWZBgtfYti
github.com/status-im/doubleratchet v3.0.0+incompatible/go.mod h1:1sqR0+yhiM/bd+wrdX79AOt2csZuJOni0nUDzKNuqOU=
github.com/status-im/go-ethereum v1.9.5-status.4 h1:F5VrxH9LmTxWl4qwQjs0TI5TgG9dVuZKqGmdwHJ0cWk=
github.com/status-im/go-ethereum v1.9.5-status.4/go.mod h1:Ulij8LMpMvXnbnPcmDqrpI+iXoXSjxItuY/wmbasTZU=
github.com/status-im/go-fcm v1.0.0-status h1:eUNKm4ooAXdEf9/GaTYeTELna5aVMOEbzjbm2irQ0gY=
github.com/status-im/go-fcm v1.0.0-status/go.mod h1:0JGzul9SfemcbTdw0mkzLR42j+BTNci5aQWlI0o/uk8=
github.com/status-im/go-multiaddr-ethv4 v1.2.0 h1:OT84UsUzTCwguqCpJqkrCMiL4VZ1SvUtH9a5MsZupBk=
github.com/status-im/go-multiaddr-ethv4 v1.2.0/go.mod h1:2VQ3C+9zEurcceasz12gPAtmEzCeyLUGPeKLSXYQKHo=
github.com/status-im/keycard-go v0.0.0-20190424133014-d95853db0f48 h1:ju5UTwk5Odtm4trrY+4Ca4RMj5OyXbmVeDAVad2T0Jw=

View File

@ -11,7 +11,6 @@ import (
"unsafe"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/log"
"github.com/status-im/status-go/api"
"github.com/status-im/status-go/exportlogs"
"github.com/status-im/status-go/logutils"
@ -27,9 +26,6 @@ import (
validator "gopkg.in/go-playground/validator.v9"
)
// All general log messages in this package should be routed through this logger.
var logger = log.New("package", "status-go/lib")
// OpenAccounts opens database and returns accounts list.
//export OpenAccounts
func OpenAccounts(datadir *C.char) *C.char {
@ -579,56 +575,6 @@ func makeJSONResponse(err error) *C.char {
return C.CString(string(outBytes))
}
// SendDataNotification sends push notifications by given tokens.
// dataPayloadJSON is a JSON string that looks like this:
// {
// "data": {
// "msg-v2": {
// "from": "0x2cea3bd5", // hash of sender (first 10 characters/4 bytes of sha3 hash)
// "to": "0xb1f89744", // hash of recipient (first 10 characters/4 bytes of sha3 hash)
// "id": "0x872653ad", // message ID hash (first 10 characters/4 bytes of sha3 hash)
// }
// }
// }
//export SendDataNotification
func SendDataNotification(dataPayloadJSON, tokensArray *C.char) (outCBytes *C.char) {
var (
err error
outBytes []byte
)
errString := ""
defer func() {
out := SendDataNotificationResult{
Status: err == nil,
Error: errString,
}
outBytes, err = json.Marshal(out)
if err != nil {
logger.Error("failed to marshal SendDataNotification output", "error", err)
outCBytes = makeJSONResponse(err)
return
}
outCBytes = C.CString(string(outBytes))
}()
tokens, err := ParseJSONArray(C.GoString(tokensArray))
if err != nil {
errString = err.Error()
return
}
err = statusBackend.SendDataNotification(C.GoString(dataPayloadJSON), tokens...)
if err != nil {
errString = err.Error()
return
}
return
}
// UpdateMailservers updates mail servers in status backend.
//export UpdateMailservers
func UpdateMailservers(data *C.char) *C.char {

View File

@ -84,9 +84,3 @@ type OnboardingAccount struct {
ChatAddress string `json:"chatAddress"`
ChatPubKey string `json:"chatPubKey"`
}
// SendDataNotificationResult is a JSON returned from notify message.
type SendDataNotificationResult struct {
Status bool `json:"status"`
Error string `json:"error,omitempty"`
}

View File

@ -1,16 +0,0 @@
package main
import (
"encoding/json"
)
// ParseJSONArray parses JSON array into Go array of string.
func ParseJSONArray(items string) ([]string, error) {
var parsedItems []string
err := json.Unmarshal([]byte(items), &parsedItems)
if err != nil {
return nil, err
}
return parsedItems, nil
}

View File

@ -26,9 +26,6 @@ import (
var statusBackend = api.NewStatusBackend()
// All general log messages in this package should be routed through this logger.
var logger = log.New("package", "status-go/mobile")
// OpenAccounts opens database and returns accounts list.
func OpenAccounts(datadir string) string {
statusBackend.UpdateRootDataDir(datadir)
@ -593,56 +590,6 @@ func makeJSONResponse(err error) string {
return string(outBytes)
}
// SendDataNotification sends push notifications by given tokens.
// dataPayloadJSON is a JSON string that looks like this:
// {
// "data": {
// "msg-v2": {
// "from": "0x2cea3bd5", // hash of sender (first 10 characters/4 bytes of sha3 hash)
// "to": "0xb1f89744", // hash of recipient (first 10 characters/4 bytes of sha3 hash)
// "id": "0x872653ad", // message ID hash (first 10 characters/4 bytes of sha3 hash)
// }
// }
// }
func SendDataNotification(dataPayloadJSON, tokensArray string) (result string) {
var (
err error
errString string
)
defer func() {
out := SendDataNotificationResult{
Status: err == nil,
Error: errString,
}
var resultBytes []byte
resultBytes, err = json.Marshal(out)
if err != nil {
logger.Error("failed to marshal SendDataNotification output", "error", err)
result = makeJSONResponse(err)
return
}
result = string(resultBytes)
}()
tokens, err := ParseJSONArray((tokensArray))
if err != nil {
errString = err.Error()
return ""
}
err = statusBackend.SendDataNotification(dataPayloadJSON, tokens...)
if err != nil {
errString = err.Error()
return ""
}
return ""
}
// UpdateMailservers updates mail servers in status backend.
//export UpdateMailservers
func UpdateMailservers(data string) string {

View File

@ -96,9 +96,3 @@ type NotifyResult struct {
type SignalHandler interface {
HandleSignal(string)
}
// SendDataNotificationResult is a JSON returned from notify message.
type SendDataNotificationResult struct {
Status bool `json:"status"`
Error string `json:"error,omitempty"`
}

View File

@ -1,11 +0,0 @@
package fcm
import (
gofcm "github.com/NaySoftware/go-fcm"
)
// FirebaseClient is a copy of "go-fcm" client methods.
type FirebaseClient interface {
NewFcmRegIdsMsg(tokens []string, body interface{}) *gofcm.FcmClient
Send() (*gofcm.FcmResponseStatus, error)
}

View File

@ -1,63 +0,0 @@
// Code generated by MockGen. DO NOT EDIT.
// Source: notifications/push/fcm/client.go
// Package fcm is a generated GoMock package.
package fcm
import (
go_fcm "github.com/NaySoftware/go-fcm"
gomock "github.com/golang/mock/gomock"
reflect "reflect"
)
// MockFirebaseClient is a mock of FirebaseClient interface
type MockFirebaseClient struct {
ctrl *gomock.Controller
recorder *MockFirebaseClientMockRecorder
}
// MockFirebaseClientMockRecorder is the mock recorder for MockFirebaseClient
type MockFirebaseClientMockRecorder struct {
mock *MockFirebaseClient
}
// NewMockFirebaseClient creates a new mock instance
func NewMockFirebaseClient(ctrl *gomock.Controller) *MockFirebaseClient {
mock := &MockFirebaseClient{ctrl: ctrl}
mock.recorder = &MockFirebaseClientMockRecorder{mock}
return mock
}
// EXPECT returns an object that allows the caller to indicate expected use
func (m *MockFirebaseClient) EXPECT() *MockFirebaseClientMockRecorder {
return m.recorder
}
// NewFcmRegIdsMsg mocks base method
func (m *MockFirebaseClient) NewFcmRegIdsMsg(tokens []string, body interface{}) *go_fcm.FcmClient {
m.ctrl.T.Helper()
ret := m.ctrl.Call(m, "NewFcmRegIdsMsg", tokens, body)
ret0, _ := ret[0].(*go_fcm.FcmClient)
return ret0
}
// NewFcmRegIdsMsg indicates an expected call of NewFcmRegIdsMsg
func (mr *MockFirebaseClientMockRecorder) NewFcmRegIdsMsg(tokens, body interface{}) *gomock.Call {
mr.mock.ctrl.T.Helper()
return mr.mock.ctrl.RecordCallWithMethodType(mr.mock, "NewFcmRegIdsMsg", reflect.TypeOf((*MockFirebaseClient)(nil).NewFcmRegIdsMsg), tokens, body)
}
// Send mocks base method
func (m *MockFirebaseClient) Send() (*go_fcm.FcmResponseStatus, error) {
m.ctrl.T.Helper()
ret := m.ctrl.Call(m, "Send")
ret0, _ := ret[0].(*go_fcm.FcmResponseStatus)
ret1, _ := ret[1].(error)
return ret0, ret1
}
// Send indicates an expected call of Send
func (mr *MockFirebaseClientMockRecorder) Send() *gomock.Call {
mr.mock.ctrl.T.Helper()
return mr.mock.ctrl.RecordCallWithMethodType(mr.mock, "Send", reflect.TypeOf((*MockFirebaseClient)(nil).Send))
}

View File

@ -1,55 +0,0 @@
package fcm
import (
"encoding/json"
"fmt"
"github.com/NaySoftware/go-fcm"
)
// Notifier manages Push Notifications.
type Notifier interface {
Send(dataPayloadJSON string, tokens ...string) error
}
// NotificationConstructor returns constructor of configured instance Notifier interface.
type NotificationConstructor func() Notifier
// Notification represents messaging provider for notifications.
type Notification struct {
client FirebaseClient
}
// NewNotification Firebase Cloud Messaging client constructor.
func NewNotification(key string) NotificationConstructor {
return func() Notifier {
client := fcm.NewFcmClient(key).
SetDelayWhileIdle(true).
SetContentAvailable(true).
SetPriority(fcm.Priority_HIGH). // Message needs to be marked as high-priority so that background task in an Android's recipient device can be invoked (https://github.com/invertase/react-native-firebase/blob/d13f0af53f1c8f20db8bc8d4b6f8c6d210e108b9/android/src/main/java/io/invertase/firebase/messaging/RNFirebaseMessagingService.java#L56)
SetTimeToLive(fcm.MAX_TTL)
return &Notification{client}
}
}
// Send sends a push notification to the tokens list.
func (n *Notification) Send(dataPayloadJSON string, tokens ...string) error {
var dataPayload map[string]string
err := json.Unmarshal([]byte(dataPayloadJSON), &dataPayload)
if err != nil {
return err
}
n.client.NewFcmRegIdsMsg(tokens, dataPayload)
resp, err := n.client.Send()
if err != nil {
return err
}
if resp != nil && !resp.Ok {
return fmt.Errorf("FCM error sending message, code=%d err=%s", resp.StatusCode, resp.Err)
}
return nil
}

View File

@ -1,80 +0,0 @@
package fcm
import (
"encoding/json"
"errors"
"testing"
"github.com/golang/mock/gomock"
"github.com/stretchr/testify/suite"
)
func TestFCMClientTestSuite(t *testing.T) {
suite.Run(t, new(NotifierTestSuite))
}
type NotifierTestSuite struct {
suite.Suite
fcmClientMock *MockFirebaseClient
fcmClientMockCtrl *gomock.Controller
}
func (s *NotifierTestSuite) SetupTest() {
s.fcmClientMockCtrl = gomock.NewController(s.T())
s.fcmClientMock = NewMockFirebaseClient(s.fcmClientMockCtrl)
}
func (s *NotifierTestSuite) TearDownTest() {
s.fcmClientMockCtrl.Finish()
}
func (s *NotifierTestSuite) TestSendSuccess() {
ids := []string{"1"}
dataPayload := make(map[string]string)
dataPayload["from"] = "a"
dataPayload["to"] = "b"
dataPayloadByteArray, err := json.Marshal(dataPayload)
s.Require().NoError(err)
dataPayloadJSON := string(dataPayloadByteArray)
s.fcmClientMock.EXPECT().NewFcmRegIdsMsg(ids, dataPayload).Times(1)
s.fcmClientMock.EXPECT().Send().Return(nil, nil).Times(1)
fcmClient := Notification{s.fcmClientMock}
err = fcmClient.Send(dataPayloadJSON, ids...)
s.NoError(err)
}
func (s *NotifierTestSuite) TestSendError() {
expectedError := errors.New("error")
ids := []string{"2"}
dataPayload := make(map[string]string)
dataPayload["from"] = "c"
dataPayload["to"] = "d"
dataPayloadByteArray, err := json.Marshal(dataPayload)
s.Require().NoError(err)
dataPayloadJSON := string(dataPayloadByteArray)
s.fcmClientMock.EXPECT().NewFcmRegIdsMsg(ids, dataPayload).Times(1)
s.fcmClientMock.EXPECT().Send().Return(nil, expectedError).Times(1)
fcmClient := Notification{s.fcmClientMock}
err = fcmClient.Send(dataPayloadJSON, ids...)
s.Equal(expectedError, err)
}
func (s *NotifierTestSuite) TestSendWithInvalidJSON() {
ids := []string{"3"}
dataPayloadJSON := "{a=b}"
fcmClient := Notification{s.fcmClientMock}
err := fcmClient.Send(dataPayloadJSON, ids...)
s.Require().Error(err)
_, ok := err.(*json.SyntaxError)
s.True(ok)
}

View File

@ -1,12 +0,0 @@
package notification
// Payload data of message.
type Payload struct {
Title string
Body string
Icon string
Sound string
Badge string
Tag string
Color string
}

View File

@ -1,339 +0,0 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., <http://fsf.org/>
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
{description}
Copyright (C) {year} {fullname}
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
{signature of Ty Coon}, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.

View File

@ -1,193 +0,0 @@
# go-fcm : FCM Library for Go
[![Donate](https://img.shields.io/badge/Donate-PayPal-green.svg?style=flat-square)](https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=MYW4MY786JXFN&lc=GB&item_name=go%2dfcm%20development&item_number=go%2dfcm&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted)
[![AUR](https://img.shields.io/aur/license/yaourt.svg?style=flat-square)](https://github.com/NaySoftware/go-fcm/blob/master/LICENSE)
Firebase Cloud Messaging ( FCM ) Library using golang ( Go )
This library uses HTTP/JSON Firebase Cloud Messaging connection server protocol
###### Features
* Send messages to a topic
* Send messages to a device list
* Message can be a notification or data payload
* Supports condition attribute (fcm only)
* Instace Id Features
- Get info about app Instance
- Subscribe app Instance to a topic
- Batch Subscribe/Unsubscribe to/from a topic
- Create registration tokens for APNs tokens
## Usage
```
go get github.com/NaySoftware/go-fcm
```
## Docs - go-fcm API
```
https://godoc.org/github.com/NaySoftware/go-fcm
```
#### Firebase Cloud Messaging HTTP Protocol Specs
```
https://firebase.google.com/docs/cloud-messaging/http-server-ref
```
#### Firebase Cloud Messaging Developer docs
```
https://firebase.google.com/docs/cloud-messaging/
```
#### (Google) Instance Id Server Reference
```
https://developers.google.com/instance-id/reference/server
```
### Notes
> a note from firebase console
```
Firebase Cloud Messaging tokens have replaced server keys for
sending messages. While you may continue to use them, support
is being deprecated for server keys.
```
###### Firebase Cloud Messaging token ( new token )
serverKey variable will also hold the new FCM token by Firebase Cloud Messaging
Firebase Cloud Messaging token can be found in:
1. Firebase project settings
2. Cloud Messaging
3. then copy the Firebase Cloud Messaging token
###### Server Key
serverKey is the server key by Firebase Cloud Messaging
Server Key can be found in:
1. Firebase project settings
2. Cloud Messaging
3. then copy the server key
[will be deprecated by firabase as mentioned above!]
###### Retry mechanism
Retry should be implemented based on the requirements.
Sending a request will result with a "FcmResponseStatus" struct, which holds
a detailed information based on the Firebase Response, with RetryAfter
(response header) if available - with a failed request.
its recommended to use a backoff time to retry the request - (if RetryAfter
header is not available).
# Examples
### Send to A topic
```go
package main
import (
"fmt"
"github.com/NaySoftware/go-fcm"
)
const (
serverKey = "YOUR-KEY"
topic = "/topics/someTopic"
)
func main() {
data := map[string]string{
"msg": "Hello World1",
"sum": "Happy Day",
}
c := fcm.NewFcmClient(serverKey)
c.NewFcmMsgTo(topic, data)
status, err := c.Send()
if err == nil {
status.PrintResults()
} else {
fmt.Println(err)
}
}
```
### Send to a list of Devices (tokens)
```go
package main
import (
"fmt"
"github.com/NaySoftware/go-fcm"
)
const (
serverKey = "YOUR-KEY"
)
func main() {
data := map[string]string{
"msg": "Hello World1",
"sum": "Happy Day",
}
ids := []string{
"token1",
}
xds := []string{
"token5",
"token6",
"token7",
}
c := fcm.NewFcmClient(serverKey)
c.NewFcmRegIdsMsg(ids, data)
c.AppendDevices(xds)
status, err := c.Send()
if err == nil {
status.PrintResults()
} else {
fmt.Println(err)
}
}
```

View File

@ -1,377 +0,0 @@
package fcm
import (
"bytes"
"encoding/json"
"fmt"
"io/ioutil"
"net/http"
"time"
)
const (
// fcm_server_url fcm server url
fcm_server_url = "https://fcm.googleapis.com/fcm/send"
// MAX_TTL the default ttl for a notification
MAX_TTL = 2419200
// Priority_HIGH notification priority
Priority_HIGH = "high"
// Priority_NORMAL notification priority
Priority_NORMAL = "normal"
// retry_after_header header name
retry_after_header = "Retry-After"
// error_key readable error caching !
error_key = "error"
)
var (
// retreyableErrors whether the error is a retryable
retreyableErrors = map[string]bool{
"Unavailable": true,
"InternalServerError": true,
}
// fcmServerUrl for testing purposes
fcmServerUrl = fcm_server_url
)
// FcmClient stores the key and the Message (FcmMsg)
type FcmClient struct {
ApiKey string
Message FcmMsg
}
// FcmMsg represents fcm request message
type FcmMsg struct {
Data interface{} `json:"data,omitempty"`
To string `json:"to,omitempty"`
RegistrationIds []string `json:"registration_ids,omitempty"`
CollapseKey string `json:"collapse_key,omitempty"`
Priority string `json:"priority,omitempty"`
Notification NotificationPayload `json:"notification,omitempty"`
ContentAvailable bool `json:"content_available,omitempty"`
DelayWhileIdle bool `json:"delay_while_idle,omitempty"`
TimeToLive int `json:"time_to_live,omitempty"`
RestrictedPackageName string `json:"restricted_package_name,omitempty"`
DryRun bool `json:"dry_run,omitempty"`
Condition string `json:"condition,omitempty"`
MutableContent bool `json:"mutable_content,omitempty"`
}
// FcmMsg represents fcm response message - (tokens and topics)
type FcmResponseStatus struct {
Ok bool
StatusCode int
MulticastId int64 `json:"multicast_id"`
Success int `json:"success"`
Fail int `json:"failure"`
Canonical_ids int `json:"canonical_ids"`
Results []map[string]string `json:"results,omitempty"`
MsgId int64 `json:"message_id,omitempty"`
Err string `json:"error,omitempty"`
RetryAfter string
}
// NotificationPayload notification message payload
type NotificationPayload struct {
Title string `json:"title,omitempty"`
Body string `json:"body,omitempty"`
Icon string `json:"icon,omitempty"`
Sound string `json:"sound,omitempty"`
Badge string `json:"badge,omitempty"`
Tag string `json:"tag,omitempty"`
Color string `json:"color,omitempty"`
ClickAction string `json:"click_action,omitempty"`
BodyLocKey string `json:"body_loc_key,omitempty"`
BodyLocArgs string `json:"body_loc_args,omitempty"`
TitleLocKey string `json:"title_loc_key,omitempty"`
TitleLocArgs string `json:"title_loc_args,omitempty"`
AndroidChannelID string `json:"android_channel_id,omitempty"`
}
// NewFcmClient init and create fcm client
func NewFcmClient(apiKey string) *FcmClient {
fcmc := new(FcmClient)
fcmc.ApiKey = apiKey
return fcmc
}
// NewFcmTopicMsg sets the targeted token/topic and the data payload
func (this *FcmClient) NewFcmTopicMsg(to string, body map[string]string) *FcmClient {
this.NewFcmMsgTo(to, body)
return this
}
// NewFcmMsgTo sets the targeted token/topic and the data payload
func (this *FcmClient) NewFcmMsgTo(to string, body interface{}) *FcmClient {
this.Message.To = to
this.Message.Data = body
return this
}
// SetMsgData sets data payload
func (this *FcmClient) SetMsgData(body interface{}) *FcmClient {
this.Message.Data = body
return this
}
// NewFcmRegIdsMsg gets a list of devices with data payload
func (this *FcmClient) NewFcmRegIdsMsg(list []string, body interface{}) *FcmClient {
this.newDevicesList(list)
this.Message.Data = body
return this
}
// newDevicesList init the devices list
func (this *FcmClient) newDevicesList(list []string) *FcmClient {
this.Message.RegistrationIds = make([]string, len(list))
copy(this.Message.RegistrationIds, list)
return this
}
// AppendDevices adds more devices/tokens to the Fcm request
func (this *FcmClient) AppendDevices(list []string) *FcmClient {
this.Message.RegistrationIds = append(this.Message.RegistrationIds, list...)
return this
}
// apiKeyHeader generates the value of the Authorization key
func (this *FcmClient) apiKeyHeader() string {
return fmt.Sprintf("key=%v", this.ApiKey)
}
// sendOnce send a single request to fcm
func (this *FcmClient) sendOnce() (*FcmResponseStatus, error) {
fcmRespStatus := new(FcmResponseStatus)
jsonByte, err := this.Message.toJsonByte()
if err != nil {
return fcmRespStatus, err
}
request, err := http.NewRequest("POST", fcmServerUrl, bytes.NewBuffer(jsonByte))
request.Header.Set("Authorization", this.apiKeyHeader())
request.Header.Set("Content-Type", "application/json")
client := &http.Client{}
response, err := client.Do(request)
if err != nil {
return fcmRespStatus, err
}
defer response.Body.Close()
body, err := ioutil.ReadAll(response.Body)
if err != nil {
return fcmRespStatus, err
}
fcmRespStatus.Err = string(body)
fcmRespStatus.StatusCode = response.StatusCode
fcmRespStatus.RetryAfter = response.Header.Get(retry_after_header)
if response.StatusCode != 200 {
return fcmRespStatus, nil
}
err = fcmRespStatus.parseStatusBody(body)
if err != nil {
return fcmRespStatus, err
}
fcmRespStatus.Ok = true
return fcmRespStatus, nil
}
// Send to fcm
func (this *FcmClient) Send() (*FcmResponseStatus, error) {
return this.sendOnce()
}
// toJsonByte converts FcmMsg to a json byte
func (this *FcmMsg) toJsonByte() ([]byte, error) {
return json.Marshal(this)
}
// parseStatusBody parse FCM response body
func (this *FcmResponseStatus) parseStatusBody(body []byte) error {
if err := json.Unmarshal([]byte(body), &this); err != nil {
return err
}
return nil
}
// SetPriority Sets the priority of the message.
// Priority_HIGH or Priority_NORMAL
func (this *FcmClient) SetPriority(p string) *FcmClient {
if p == Priority_HIGH {
this.Message.Priority = Priority_HIGH
} else {
this.Message.Priority = Priority_NORMAL
}
return this
}
// SetCollapseKey This parameter identifies a group of messages
// (e.g., with collapse_key: "Updates Available") that can be collapsed,
// so that only the last message gets sent when delivery can be resumed.
// This is intended to avoid sending too many of the same messages when the
// device comes back online or becomes active (see delay_while_idle).
func (this *FcmClient) SetCollapseKey(val string) *FcmClient {
this.Message.CollapseKey = val
return this
}
// SetNotificationPayload sets the notification payload based on the specs
// https://firebase.google.com/docs/cloud-messaging/http-server-ref
func (this *FcmClient) SetNotificationPayload(payload *NotificationPayload) *FcmClient {
this.Message.Notification = *payload
return this
}
// SetContentAvailable On iOS, use this field to represent content-available
// in the APNS payload. When a notification or message is sent and this is set
// to true, an inactive client app is awoken. On Android, data messages wake
// the app by default. On Chrome, currently not supported.
func (this *FcmClient) SetContentAvailable(isContentAvailable bool) *FcmClient {
this.Message.ContentAvailable = isContentAvailable
return this
}
// SetDelayWhileIdle When this parameter is set to true, it indicates that
// the message should not be sent until the device becomes active.
// The default value is false.
func (this *FcmClient) SetDelayWhileIdle(isDelayWhileIdle bool) *FcmClient {
this.Message.DelayWhileIdle = isDelayWhileIdle
return this
}
// SetTimeToLive This parameter specifies how long (in seconds) the message
// should be kept in FCM storage if the device is offline. The maximum time
// to live supported is 4 weeks, and the default value is 4 weeks.
// For more information, see
// https://firebase.google.com/docs/cloud-messaging/concept-options#ttl
func (this *FcmClient) SetTimeToLive(ttl int) *FcmClient {
if ttl > MAX_TTL {
this.Message.TimeToLive = MAX_TTL
} else {
this.Message.TimeToLive = ttl
}
return this
}
// SetRestrictedPackageName This parameter specifies the package name of the
// application where the registration tokens must match in order to
// receive the message.
func (this *FcmClient) SetRestrictedPackageName(pkg string) *FcmClient {
this.Message.RestrictedPackageName = pkg
return this
}
// SetDryRun This parameter, when set to true, allows developers to test
// a request without actually sending a message.
// The default value is false
func (this *FcmClient) SetDryRun(drun bool) *FcmClient {
this.Message.DryRun = drun
return this
}
// SetMutableContent Currently for iOS 10+ devices only. On iOS,
// use this field to represent mutable-content in the APNs payload.
// When a notification is sent and this is set to true, the content
// of the notification can be modified before it is displayed,
// using a Notification Service app extension.
// This parameter will be ignored for Android and web.
func (this *FcmClient) SetMutableContent(mc bool) *FcmClient {
this.Message.MutableContent = mc
return this
}
// PrintResults prints the FcmResponseStatus results for fast using and debugging
func (this *FcmResponseStatus) PrintResults() {
fmt.Println("Status Code :", this.StatusCode)
fmt.Println("Success :", this.Success)
fmt.Println("Fail :", this.Fail)
fmt.Println("Canonical_ids :", this.Canonical_ids)
fmt.Println("Topic MsgId :", this.MsgId)
fmt.Println("Topic Err :", this.Err)
for i, val := range this.Results {
fmt.Printf("Result(%d)> \n", i)
for k, v := range val {
fmt.Println("\t", k, " : ", v)
}
}
}
// IsTimeout check whether the response timeout based on http response status
// code and if any error is retryable
func (this *FcmResponseStatus) IsTimeout() bool {
if this.StatusCode >= 500 {
return true
} else if this.StatusCode == 200 {
for _, val := range this.Results {
for k, v := range val {
if k == error_key && retreyableErrors[v] == true {
return true
}
}
}
}
return false
}
// GetRetryAfterTime converts the retrey after response header
// to a time.Duration
func (this *FcmResponseStatus) GetRetryAfterTime() (t time.Duration, e error) {
t, e = time.ParseDuration(this.RetryAfter)
return
}
// SetCondition to set a logical expression of conditions that determine the message target
func (this *FcmClient) SetCondition(condition string) *FcmClient {
this.Message.Condition = condition
return this
}

View File

@ -1,455 +0,0 @@
package fcm
import (
"bytes"
"encoding/json"
"errors"
"fmt"
"io/ioutil"
"net/http"
"strings"
)
const (
// instance_id_info_with_details_srv_url
instance_id_info_with_details_srv_url = "https://iid.googleapis.com/iid/info/%s?details=true"
// instance_id_info_no_details_srv_url
instance_id_info_no_details_srv_url = "https://iid.googleapis.com/iid/info/%s"
// subscribe_instanceid_to_topic_srv_url
subscribe_instanceid_to_topic_srv_url = "https://iid.googleapis.com/iid/v1/%s/rel/topics/%s"
// batch_add_srv_url
batch_add_srv_url = "https://iid.googleapis.com/iid/v1:batchAdd"
// batch_rem_srv_url
batch_rem_srv_url = "https://iid.googleapis.com/iid/v1:batchRemove"
// apns_batch_import_srv_url
apns_batch_import_srv_url = "https://iid.googleapis.com/iid/v1:batchImport"
// apns_token_key
apns_token_key = "apns_token"
// status_key
status_key = "status"
// reg_token_key
reg_token_key = "registration_token"
// topics
topics = "/topics/"
)
var (
// batchErrors response errors
batchErrors = map[string]bool{
"NOT_FOUND": true,
"INVALID_ARGUMENT": true,
"INTERNAL": true,
"TOO_MANY_TOPICS": true,
}
)
// InstanceIdInfoResponse response for instance id info request
type InstanceIdInfoResponse struct {
Application string `json:"application,omitempty"`
AuthorizedEntity string `json:"authorizedEntity,omitempty"`
ApplicationVersion string `json:"applicationVersion,omitempty"`
AppSigner string `json:"appSigner,omitempty"`
AttestStatus string `json:"attestStatus,omitempty"`
Platform string `json:"platform,omitempty"`
ConnectionType string `json:"connectionType,omitempty"`
ConnectDate string `json:"connectDate,omitempty"`
Error string `json:"error,omitempty"`
Rel map[string]map[string]map[string]string `json:"rel,omitempty"`
}
// SubscribeResponse response for single topic subscribtion
type SubscribeResponse struct {
Error string `json:"error,omitempty"`
Status string
StatusCode int
}
// BatchRequest add/remove request
type BatchRequest struct {
To string `json:"to,omitempty"`
RegTokens []string `json:"registration_tokens,omitempty"`
}
// BatchResponse add/remove response
type BatchResponse struct {
Error string `json:"error,omitempty"`
Results []map[string]string `json:"results,omitempty"`
Status string
StatusCode int
}
// ApnsBatchRequest apns import request
type ApnsBatchRequest struct {
App string `json:"application,omitempty"`
Sandbox bool `json:"sandbox,omitempty"`
ApnsTokens []string `json:"apns_tokens,omitempty"`
}
// ApnsBatchResponse apns import response
type ApnsBatchResponse struct {
Results []map[string]string `json:"results,omitempty"`
Error string `json:"error,omitempty"`
Status string
StatusCode int
}
// GetInfo gets the instance id info
func (this *FcmClient) GetInfo(withDetails bool, instanceIdToken string) (*InstanceIdInfoResponse, error) {
var request_url string = generateGetInfoUrl(instance_id_info_no_details_srv_url, instanceIdToken)
if withDetails == true {
request_url = generateGetInfoUrl(instance_id_info_with_details_srv_url, instanceIdToken)
}
request, err := http.NewRequest("GET", request_url, nil)
request.Header.Set("Authorization", this.apiKeyHeader())
request.Header.Set("Content-Type", "application/json")
if err != nil {
return nil, err
}
client := &http.Client{}
response, err := client.Do(request)
if err != nil {
return nil, err
}
defer response.Body.Close()
body, err := ioutil.ReadAll(response.Body)
if err != nil {
return nil, err
}
infoResponse, err := parseGetInfo(body)
if err != nil {
return nil, err
}
return infoResponse, nil
}
// parseGetInfo parses response to InstanceIdInfoResponse
func parseGetInfo(body []byte) (*InstanceIdInfoResponse, error) {
info := new(InstanceIdInfoResponse)
if err := json.Unmarshal([]byte(body), &info); err != nil {
return nil, err
}
return info, nil
}
// PrintResults prints InstanceIdInfoResponse, for faster debugging
func (this *InstanceIdInfoResponse) PrintResults() {
fmt.Println("Error : ", this.Error)
fmt.Println("App : ", this.Application)
fmt.Println("Auth : ", this.AuthorizedEntity)
fmt.Println("Ver : ", this.ApplicationVersion)
fmt.Println("Sig : ", this.AppSigner)
fmt.Println("Att : ", this.AttestStatus)
fmt.Println("Platform : ", this.Platform)
fmt.Println("Connection: ", this.ConnectionType)
fmt.Println("ConnDate : ", this.ConnectDate)
fmt.Println("Rel : ")
for k, v := range this.Rel {
fmt.Println(k, " --> ")
for k2, v2 := range v {
fmt.Println("\t", k2, "\t|")
fmt.Println("\t\t", "addDate", " : ", v2["addDate"])
}
}
}
// generateGetInfoUrl generate based on with details and the instance token
func generateGetInfoUrl(srv string, instanceIdToken string) string {
return fmt.Sprintf(srv, instanceIdToken)
}
// SubscribeToTopic subscribes a single device/token to a topic
func (this *FcmClient) SubscribeToTopic(instanceIdToken string, topic string) (*SubscribeResponse, error) {
request, err := http.NewRequest("POST", generateSubToTopicUrl(instanceIdToken, topic), nil)
request.Header.Set("Authorization", this.apiKeyHeader())
request.Header.Set("Content-Type", "application/json")
if err != nil {
return nil, err
}
client := &http.Client{}
response, err := client.Do(request)
if err != nil {
return nil, err
}
defer response.Body.Close()
body, err := ioutil.ReadAll(response.Body)
if err != nil {
return nil, err
}
subResponse, err := parseSubscribeResponse(body, response)
if err != nil {
return nil, err
}
return subResponse, nil
}
// parseSubscribeResponse converts a byte response to a SubscribeResponse
func parseSubscribeResponse(body []byte, resp *http.Response) (*SubscribeResponse, error) {
subResp := new(SubscribeResponse)
subResp.Status = resp.Status
subResp.StatusCode = resp.StatusCode
if err := json.Unmarshal(body, &subResp); err != nil {
return nil, err
}
return subResp, nil
}
// PrintResults prints SubscribeResponse, for faster debugging
func (this *SubscribeResponse) PrintResults() {
fmt.Println("Response Status: ", this.Status)
fmt.Println("Response Code : ", this.StatusCode)
if this.StatusCode != 200 {
fmt.Println("Error : ", this.Error)
}
}
// generateSubToTopicUrl generates a url based on the instnace id and topic name
func generateSubToTopicUrl(instaceId string, topic string) string {
Tmptopic := strings.ToLower(topic)
if strings.Contains(Tmptopic, "/topics/") {
tmp := strings.Split(topic, "/")
topic = tmp[len(tmp)-1]
}
return fmt.Sprintf(subscribe_instanceid_to_topic_srv_url, instaceId, topic)
}
// BatchSubscribeToTopic subscribes (many) devices/tokens to a given topic
func (this *FcmClient) BatchSubscribeToTopic(tokens []string, topic string) (*BatchResponse, error) {
jsonByte, err := generateBatchRequest(tokens, topic)
if err != nil {
return nil, err
}
request, err := http.NewRequest("POST", batch_add_srv_url, bytes.NewBuffer(jsonByte))
request.Header.Set("Authorization", this.apiKeyHeader())
request.Header.Set("Content-Type", "application/json")
if err != nil {
fmt.Println(err)
}
client := &http.Client{}
response, err := client.Do(request)
if err != nil {
fmt.Println(err)
}
defer response.Body.Close()
body, err := ioutil.ReadAll(response.Body)
if err != nil {
return nil, err
}
result, err := generateBatchResponse(body)
if err != nil {
return nil, err
}
if result == nil {
return nil, errors.New("Parsing response error")
}
result.Status = response.Status
result.StatusCode = response.StatusCode
return result, nil
}
// BatchUnsubscribeFromTopic unsubscribes (many) devices/tokens from a given topic
func (this *FcmClient) BatchUnsubscribeFromTopic(tokens []string, topic string) (*BatchResponse, error) {
jsonByte, err := generateBatchRequest(tokens, topic)
if err != nil {
fmt.Println(err)
return nil, err
}
request, err := http.NewRequest("POST", batch_rem_srv_url, bytes.NewBuffer(jsonByte))
request.Header.Set("Authorization", this.apiKeyHeader())
request.Header.Set("Content-Type", "application/json")
if err != nil {
fmt.Println(err)
}
client := &http.Client{}
response, err := client.Do(request)
if err != nil {
fmt.Println(err)
}
defer response.Body.Close()
body, err := ioutil.ReadAll(response.Body)
if err != nil {
return nil, err
}
result, err := generateBatchResponse(body)
if err != nil {
return nil, err
}
if result == nil {
return nil, errors.New("Parsing response error")
}
result.Status = response.Status
result.StatusCode = response.StatusCode
return result, nil
}
// PrintResults prints BatchResponse, for faster debugging
func (this *BatchResponse) PrintResults() {
fmt.Println("Error : ", this.Error)
fmt.Println("Status : ", this.Status)
fmt.Println("Status Code : ", this.StatusCode)
for i, val := range this.Results {
if batchErrors[val["error"]] == true {
fmt.Println("ID: ", i, " | ", val["error"])
}
}
}
// generateBatchRequest based on tokens and topic
func generateBatchRequest(tokens []string, topic string) ([]byte, error) {
envelope := new(BatchRequest)
envelope.To = topics + extractTopicName(topic)
envelope.RegTokens = make([]string, len(tokens))
copy(envelope.RegTokens, tokens)
return json.Marshal(envelope)
}
// extractTopicName extract topic name for valid topic name input
func extractTopicName(inTopic string) (result string) {
Tmptopic := strings.ToLower(inTopic)
if strings.Contains(Tmptopic, "/topics/") {
tmp := strings.Split(inTopic, "/")
result = tmp[len(tmp)-1]
return
}
result = inTopic
return
}
// generateBatchResponse converts a byte response to BatchResponse
func generateBatchResponse(resp []byte) (*BatchResponse, error) {
result := new(BatchResponse)
if err := json.Unmarshal(resp, &result); err != nil {
return nil, err
}
return result, nil
}
// ApnsBatchImportRequest apns import requst
func (this *FcmClient) ApnsBatchImportRequest(apnsReq *ApnsBatchRequest) (*ApnsBatchResponse, error) {
jsonByte, err := apnsReq.ToByte()
if err != nil {
return nil, err
}
request, err := http.NewRequest("POST", apns_batch_import_srv_url, bytes.NewBuffer(jsonByte))
request.Header.Set("Authorization", this.apiKeyHeader())
request.Header.Set("Content-Type", "application/json")
if err != nil {
return nil, err
}
client := &http.Client{}
response, err := client.Do(request)
if err != nil {
return nil, err
}
defer response.Body.Close()
body, err := ioutil.ReadAll(response.Body)
if err != nil {
return nil, err
}
result, err := parseApnsBatchResponse(body)
if err != nil {
return nil, err
}
if result == nil {
return nil, errors.New("Parsing Request error")
}
result.Status = response.Status
result.StatusCode = response.StatusCode
return result, nil
}
// ToByte converts ApnsBatchRequest to a byte
func (this *ApnsBatchRequest) ToByte() ([]byte, error) {
data, err := json.Marshal(this)
if err != nil {
return nil, err
}
return data, nil
}
// parseApnsBatchResponse converts apns byte response to ApnsBatchResponse
func parseApnsBatchResponse(resp []byte) (*ApnsBatchResponse, error) {
result := new(ApnsBatchResponse)
if err := json.Unmarshal(resp, &result); err != nil {
return nil, err
}
return result, nil
}
// PrintResults prints ApnsBatchResponse, for faster debugging
func (this *ApnsBatchResponse) PrintResults() {
fmt.Println("Status : ", this.Status)
fmt.Println("StatusCode : ", this.StatusCode)
fmt.Println("Error : ", this.Error)
for i, val := range this.Results {
fmt.Println(i, ":")
fmt.Println("\tAPNS Token", val[apns_token_key])
fmt.Println("\tStatus ", val[status_key])
fmt.Println("\tReg Token ", val[reg_token_key])
}
}

2
vendor/modules.txt vendored
View File

@ -1,5 +1,3 @@
# github.com/NaySoftware/go-fcm v0.0.0-00010101000000-000000000000 => github.com/status-im/go-fcm v1.0.0-status
github.com/NaySoftware/go-fcm
# github.com/allegro/bigcache v1.2.0
github.com/allegro/bigcache
github.com/allegro/bigcache/queue