status-go/server/pairing/connection.go

293 lines
7.4 KiB
Go
Raw Normal View History

package pairing
import (
"crypto/ecdsa"
"crypto/elliptic"
"fmt"
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
"log"
"math/big"
"net"
"net/url"
"strings"
"github.com/btcsuite/btcutil/base58"
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
"github.com/google/uuid"
"github.com/status-im/status-go/server/pairing/versioning"
)
const (
connectionStringID = "cs"
)
type ConnectionParams struct {
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
version versioning.ConnectionParamVersion
netIPs []net.IP
port int
publicKey *ecdsa.PublicKey
aesKey []byte
installationID string
keyUID string
}
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
func NewConnectionParams(netIPs []net.IP, port int, publicKey *ecdsa.PublicKey, aesKey []byte, installationID, keyUID string) *ConnectionParams {
cp := new(ConnectionParams)
cp.version = versioning.LatestConnectionParamVer
cp.netIPs = netIPs
cp.port = port
cp.publicKey = publicKey
cp.aesKey = aesKey
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
cp.installationID = installationID
cp.keyUID = keyUID
return cp
}
// ToString generates a string required for generating a secure connection to another Status device.
//
// The returned string will look like below:
2023-03-21 13:08:28 +00:00
// - "cs2:4FHRnp:H6G:uqnnMwVUfJc2Fkcaojet8F1ufKC3hZdGEt47joyBx9yd:BbnZ7Gc66t54a9kEFCf7FW8SGQuYypwHVeNkRYeNoqV6"
//
// Format bytes encoded into a base58 string, delimited by ":"
// - string type identifier
// - version
// - net.IP
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
// - array of IPs in next form:
// | 1 byte | 4*N bytes | 1 byte | 16*N bytes |
// | N | N * IPv4 | M | M * IPv6 |
// - port
// - ecdsa CompressedPublicKey
// - AES encryption key
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
// - string InstallationID of the sending device
// - string KeyUID of the sending device
// NOTE:
// - append(accrete) parameters instead of changing(breaking) existing parameters. Appending should **never** break, modifying existing parameters will break. Watch this before making changes: https://www.youtube.com/watch?v=oyLBGkS5ICk
// - never strictly check version, unless you really want to break
// This flag is used to keep compatibility with 2.29. It will output a 5 parameters connection string with version 3.
var keep229Compatibility bool = true
func (cp *ConnectionParams) ToString() string {
v := base58.Encode(new(big.Int).SetInt64(int64(cp.version)).Bytes())
ips := base58.Encode(SerializeNetIps(cp.netIPs))
p := base58.Encode(new(big.Int).SetInt64(int64(cp.port)).Bytes())
k := base58.Encode(elliptic.MarshalCompressed(cp.publicKey.Curve, cp.publicKey.X, cp.publicKey.Y))
ek := base58.Encode(cp.aesKey)
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
if keep229Compatibility {
return fmt.Sprintf("%s%s:%s:%s:%s:%s", connectionStringID, v, ips, p, k, ek)
}
var i string
if cp.installationID != "" {
u, err := uuid.Parse(cp.installationID)
if err != nil {
log.Fatalf("Failed to parse UUID: %v", err)
} else {
// Convert UUID to byte slice
byteSlice := u[:]
i = base58.Encode(byteSlice)
}
}
var kuid string
if cp.keyUID != "" {
kuid = base58.Encode([]byte(cp.keyUID))
}
return fmt.Sprintf("%s%s:%s:%s:%s:%s:%s:%s", connectionStringID, v, ips, p, k, ek, i, kuid)
}
func (cp *ConnectionParams) InstallationID() string {
return cp.installationID
}
func (cp *ConnectionParams) KeyUID() string {
return cp.keyUID
}
func SerializeNetIps(ips []net.IP) []byte {
var out []byte
var ipv4 []net.IP
var ipv6 []net.IP
for _, ip := range ips {
if v := ip.To4(); v != nil {
ipv4 = append(ipv4, v)
} else {
ipv6 = append(ipv6, ip)
}
}
for _, arr := range [][]net.IP{ipv4, ipv6} {
out = append(out, uint8(len(arr)))
for _, ip := range arr {
out = append(out, ip...)
}
}
return out
}
func ParseNetIps(in []byte) ([]net.IP, error) {
var out []net.IP
if len(in) < 1 {
return nil, fmt.Errorf("net.ip field is too short: '%d', at least 1 byte required", len(in))
}
for _, ipLen := range []int{net.IPv4len, net.IPv6len} {
count := int(in[0])
in = in[1:]
if expectedLen := ipLen * count; len(in) < expectedLen {
return nil, fmt.Errorf("net.ip.ip%d field is too short, expected at least '%d' bytes, '%d' bytes found", ipLen, expectedLen, len(in))
}
for i := 0; i < count; i++ {
offset := i * ipLen
ip := in[offset : ipLen+offset]
out = append(out, ip)
}
in = in[ipLen*count:]
}
return out, nil
}
// FromString parses a connection params string required for to securely connect to another Status device.
// This function parses a connection string generated by ToString
func (cp *ConnectionParams) FromString(s string) error {
if len(s) < 2 {
return fmt.Errorf("connection string is too short: '%s'", s)
}
if s[:2] != connectionStringID {
return fmt.Errorf("connection string doesn't begin with identifier '%s'", connectionStringID)
}
2023-03-21 13:08:28 +00:00
requiredParams := 5
sData := strings.Split(s[2:], ":")
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
// NOTE: always allow extra parameters for forward compatibility, error on not enough required parameters or failing to parse
if len(sData) < requiredParams {
return fmt.Errorf("expected data '%s' to have length of '%d', received '%d'", s, requiredParams, len(sData))
}
netIpsBytes := base58.Decode(sData[1])
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
netIps, err := ParseNetIps(netIpsBytes)
if err != nil {
return err
}
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
cp.netIPs = netIps
cp.port = int(new(big.Int).SetBytes(base58.Decode(sData[2])).Int64())
cp.publicKey = new(ecdsa.PublicKey)
cp.publicKey.X, cp.publicKey.Y = elliptic.UnmarshalCompressed(elliptic.P256(), base58.Decode(sData[3]))
cp.publicKey.Curve = elliptic.P256()
cp.aesKey = base58.Decode(sData[4])
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
if len(sData) > 5 && len(sData[5]) != 0 {
installationIDBytes := base58.Decode(sData[5])
installationID, err := uuid.FromBytes(installationIDBytes)
if err != nil {
return err
}
cp.installationID = installationID.String()
}
if len(sData) > 6 && len(sData[6]) != 0 {
decodedBytes := base58.Decode(sData[6])
cp.keyUID = string(decodedBytes)
}
return cp.validate()
}
func (cp *ConnectionParams) validate() error {
feat: fallback pairing seed (#5614) * feat(pairing)!: Add extra parameters and remove v2 compatibility This commit includes the following changes: I have added a flag to maintain 2.29 compatibility. Breaking change in connection string The local pairing code that was parsing the connection string had a few non-upgradable features: It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking. It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect. The code has been changed so that: Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow. I have also removed version from the payload, since it wasn't used. This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one). https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy Changed MessengerResponse to use internally a map of installations rather than an array (minor) Just moving towards maps as arrays tend to lead to subtle bugs. Moved pairing methods to messenger_pairing.go Just moved some methods Added 2 new methods for the fallback flow FinishPairingThroughSeedPhraseProcess https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29 EnableAndSyncInstallation https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18 Flow for clients Client A1 is logged in Client A2 is logged out Client A1 shows a QR code Client A2 scans a QR code If connection fails on A2, the user will be prompted to enter a seed phrase. If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device. Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow. Current issues Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further. * test_: add more test for connection string parser * fix_: fix panic when parse old connection string * test_: add comments for TestMessengerPairAfterSeedPhrase * fix_: correct error description * feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair * fix_: delete leftover * fix_: add UniqueKey method * fix_: unify the response for InputConnectionStringForBootstrapping * fix_: remove fields installationID and keyUID in GethStatusBackend * fix_: rename messenger_pairing to messenger_pairing_and_syncing --------- Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
err := cp.validateNetIP()
if err != nil {
return err
}
err = cp.validatePort()
if err != nil {
return err
}
err = cp.validatePublicKey()
if err != nil {
return err
}
2023-03-21 13:08:28 +00:00
return cp.validateAESKey()
}
func (cp *ConnectionParams) validateNetIP() error {
for _, ip := range cp.netIPs {
if ok := net.ParseIP(ip.String()); ok == nil {
return fmt.Errorf("invalid net ip '%s'", cp.netIPs)
}
}
return nil
}
func (cp *ConnectionParams) validatePort() error {
if cp.port > 0 && cp.port < 0x10000 {
return nil
}
return fmt.Errorf("port '%d' outside of bounds of 1 - 65535", cp.port)
}
func (cp *ConnectionParams) validatePublicKey() error {
switch {
case cp.publicKey.Curve == nil, cp.publicKey.Curve != elliptic.P256():
return fmt.Errorf("public key Curve not `elliptic.P256`")
case cp.publicKey.X == nil, cp.publicKey.X.Cmp(big.NewInt(0)) == 0:
return fmt.Errorf("public key X not set")
case cp.publicKey.Y == nil, cp.publicKey.Y.Cmp(big.NewInt(0)) == 0:
return fmt.Errorf("public key Y not set")
default:
return nil
}
}
func (cp *ConnectionParams) validateAESKey() error {
if len(cp.aesKey) != 32 {
return fmt.Errorf("AES key invalid length, expect length 32, received length '%d'", len(cp.aesKey))
}
return nil
}
func (cp *ConnectionParams) URL(IPIndex int) (*url.URL, error) {
if IPIndex < 0 || IPIndex >= len(cp.netIPs) {
return nil, fmt.Errorf("invalid IP index '%d'", IPIndex)
}
2022-05-03 14:50:40 +00:00
err := cp.validate()
if err != nil {
return nil, err
2022-05-03 14:50:40 +00:00
}
return cp.BuildURL(cp.netIPs[IPIndex]), nil
}
func (cp *ConnectionParams) BuildURL(ip net.IP) *url.URL {
return &url.URL{
Scheme: "https",
Host: fmt.Sprintf("%s:%d", ip, cp.port),
}
}
func ValidateConnectionString(cs string) error {
ccp := ConnectionParams{}
err := ccp.FromString(cs)
return err
}