2021-09-09 16:28:54 +02:00
package transfer
2019-06-14 13:16:30 +03:00
import (
"context"
"math/big"
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
"sort"
2019-06-14 13:16:30 +03:00
"sync"
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
"time"
"github.com/pkg/errors"
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
"go.uber.org/zap"
2019-06-14 13:16:30 +03:00
"github.com/ethereum/go-ethereum/common"
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
"github.com/status-im/status-go/logutils"
2021-09-09 16:28:54 +02:00
"github.com/status-im/status-go/services/wallet/async"
2023-09-04 07:34:09 +02:00
"github.com/status-im/status-go/services/wallet/balance"
2019-06-14 13:16:30 +03:00
)
2023-05-08 08:02:00 +02:00
const (
2023-05-19 10:19:48 +02:00
NoThreadLimit uint32 = 0
SequentialThreadLimit uint32 = 10
2023-05-08 08:02:00 +02:00
)
2019-06-14 13:16:30 +03:00
// NewConcurrentDownloader creates ConcurrentDownloader instance.
2023-05-08 08:02:00 +02:00
func NewConcurrentDownloader ( ctx context . Context , limit uint32 ) * ConcurrentDownloader {
runner := async . NewQueuedAtomicGroup ( ctx , limit )
2019-06-14 13:16:30 +03:00
result := & Result { }
return & ConcurrentDownloader { runner , result }
}
type ConcurrentDownloader struct {
2023-05-08 08:02:00 +02:00
* async . QueuedAtomicGroup
2019-06-14 13:16:30 +03:00
* Result
}
type Result struct {
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
mu sync . Mutex
transfers [ ] Transfer
headers [ ] * DBHeader
blockRanges [ ] [ ] * big . Int
2019-06-14 13:16:30 +03:00
}
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
var errDownloaderStuck = errors . New ( "eth downloader is stuck" )
2019-06-14 13:16:30 +03:00
func ( r * Result ) Push ( transfers ... Transfer ) {
r . mu . Lock ( )
defer r . mu . Unlock ( )
r . transfers = append ( r . transfers , transfers ... )
}
func ( r * Result ) Get ( ) [ ] Transfer {
r . mu . Lock ( )
defer r . mu . Unlock ( )
rst := make ( [ ] Transfer , len ( r . transfers ) )
copy ( rst , r . transfers )
return rst
}
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
func ( r * Result ) PushHeader ( block * DBHeader ) {
r . mu . Lock ( )
defer r . mu . Unlock ( )
r . headers = append ( r . headers , block )
}
func ( r * Result ) GetHeaders ( ) [ ] * DBHeader {
r . mu . Lock ( )
defer r . mu . Unlock ( )
rst := make ( [ ] * DBHeader , len ( r . headers ) )
copy ( rst , r . headers )
return rst
}
func ( r * Result ) PushRange ( blockRange [ ] * big . Int ) {
r . mu . Lock ( )
defer r . mu . Unlock ( )
r . blockRanges = append ( r . blockRanges , blockRange )
}
func ( r * Result ) GetRanges ( ) [ ] [ ] * big . Int {
r . mu . Lock ( )
defer r . mu . Unlock ( )
rst := make ( [ ] [ ] * big . Int , len ( r . blockRanges ) )
copy ( rst , r . blockRanges )
r . blockRanges = [ ] [ ] * big . Int { }
return rst
}
2021-09-09 16:28:54 +02:00
// Downloader downloads transfers from single block using number.
type Downloader interface {
2019-06-14 13:16:30 +03:00
GetTransfersByNumber ( context . Context , * big . Int ) ( [ ] Transfer , error )
}
2023-05-19 10:19:48 +02:00
// Returns new block ranges that contain transfers and found block headers that contain transfers, and a block where
// beginning of trasfers history detected
2023-09-04 07:34:09 +02:00
func checkRangesWithStartBlock ( parent context . Context , client balance . Reader , cache balance . Cacher ,
2023-06-01 15:09:50 +02:00
account common . Address , ranges [ ] [ ] * big . Int , threadLimit uint32 , startBlock * big . Int ) (
resRanges [ ] [ ] * big . Int , headers [ ] * DBHeader , newStartBlock * big . Int , err error ) {
2023-05-19 10:19:48 +02:00
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "start checkRanges" ,
zap . Stringer ( "account" , account ) ,
zap . Int ( "ranges len" , len ( ranges ) ) ,
zap . Stringer ( "startBlock" , startBlock ) ,
)
2023-05-08 08:02:00 +02:00
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
ctx , cancel := context . WithTimeout ( parent , 30 * time . Second )
defer cancel ( )
2023-05-19 10:19:48 +02:00
c := NewConcurrentDownloader ( ctx , threadLimit )
newStartBlock = startBlock
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
for _ , blocksRange := range ranges {
from := blocksRange [ 0 ]
to := blocksRange [ 1 ]
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "check block range" ,
zap . Stringer ( "from" , from ) ,
zap . Stringer ( "to" , to ) ,
)
2023-10-04 14:00:12 +02:00
2023-05-19 10:19:48 +02:00
if startBlock != nil {
if to . Cmp ( newStartBlock ) <= 0 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "'to' block is less than 'start' block" ,
zap . Stringer ( "to" , to ) ,
zap . Stringer ( "startBlock" , startBlock ) ,
)
2023-05-19 10:19:48 +02:00
continue
}
}
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
c . Add ( func ( ctx context . Context ) error {
if from . Cmp ( to ) >= 0 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "'from' block is greater than or equal to 'to' block" ,
zap . Stringer ( "from" , from ) ,
zap . Stringer ( "to" , to ) ,
)
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
return nil
}
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "eth transfers comparing blocks" ,
zap . Stringer ( "from" , from ) ,
zap . Stringer ( "to" , to ) ,
)
2023-05-19 10:19:48 +02:00
if startBlock != nil {
if to . Cmp ( startBlock ) <= 0 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "'to' block is less than 'start' block" ,
zap . Stringer ( "to" , to ) ,
zap . Stringer ( "startBlock" , startBlock ) ,
)
2023-05-19 10:19:48 +02:00
return nil
}
}
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
lb , err := cache . BalanceAt ( ctx , client , account , from )
if err != nil {
return err
}
hb , err := cache . BalanceAt ( ctx , client , account , to )
2019-06-14 13:16:30 +03:00
if err != nil {
return err
}
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
if lb . Cmp ( hb ) == 0 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "balances are equal" ,
zap . Stringer ( "from" , from ) ,
zap . Stringer ( "to" , to ) ,
zap . Stringer ( "lb" , lb ) ,
zap . Stringer ( "hb" , hb ) ,
)
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
2021-02-19 15:34:24 +02:00
hn , err := cache . NonceAt ( ctx , client , account , to )
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
if err != nil {
return err
}
2021-02-16 13:30:29 +02:00
// if nonce is zero in a newer block then there is no need to check an older one
2021-02-19 15:34:24 +02:00
if * hn == 0 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "zero nonce" , zap . Stringer ( "to" , to ) )
2023-05-19 10:19:48 +02:00
2023-05-26 10:27:48 +02:00
if hb . Cmp ( big . NewInt ( 0 ) ) == 0 { // balance is 0, nonce is 0, we stop checking further, that will be the start block (even though the real one can be a later one)
if startBlock != nil {
2023-05-19 10:19:48 +02:00
if to . Cmp ( newStartBlock ) > 0 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "found possible start block, we should not search back" , zap . Stringer ( "block" , to ) )
2023-05-19 10:19:48 +02:00
newStartBlock = to // increase newStartBlock if we found a new higher block
}
2023-05-26 10:27:48 +02:00
} else {
newStartBlock = to
2023-05-19 10:19:48 +02:00
}
}
2021-02-16 13:30:29 +02:00
return nil
}
2021-02-19 15:34:24 +02:00
ln , err := cache . NonceAt ( ctx , client , account , from )
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
if err != nil {
return err
}
2021-02-19 15:34:24 +02:00
if * ln == * hn {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "transaction count is also equal" ,
zap . Stringer ( "from" , from ) ,
zap . Stringer ( "to" , to ) ,
zap . Int64p ( "ln" , ln ) ,
zap . Int64p ( "hn" , hn ) ,
)
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
return nil
}
}
if new ( big . Int ) . Sub ( to , from ) . Cmp ( one ) == 0 {
header , err := client . HeaderByNumber ( ctx , to )
if err != nil {
return err
}
2024-09-26 08:38:22 -03:00
c . PushHeader ( toDBHeader ( header , account ) )
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
return nil
}
mid := new ( big . Int ) . Add ( from , to )
mid = mid . Div ( mid , two )
_ , err = cache . BalanceAt ( ctx , client , account , mid )
if err != nil {
return err
}
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "balances are not equal" ,
zap . Stringer ( "from" , from ) ,
zap . Stringer ( "mid" , mid ) ,
zap . Stringer ( "to" , to ) ,
)
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
c . PushRange ( [ ] * big . Int { mid , to } )
2023-05-19 10:19:48 +02:00
c . PushRange ( [ ] * big . Int { from , mid } )
2019-06-14 13:16:30 +03:00
return nil
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
} )
}
select {
case <- c . WaitAsync ( ) :
case <- ctx . Done ( ) :
2023-05-19 10:19:48 +02:00
return nil , nil , nil , errDownloaderStuck
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
}
if c . Error ( ) != nil {
2023-05-19 10:19:48 +02:00
return nil , nil , nil , errors . Wrap ( c . Error ( ) , "failed to dowload transfers using concurrent downloader" )
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
}
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "end checkRanges" ,
zap . Stringer ( "account" , account ) ,
zap . Stringer ( "newStartBlock" , newStartBlock ) ,
)
2023-05-19 10:19:48 +02:00
return c . GetRanges ( ) , c . GetHeaders ( ) , newStartBlock , nil
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
}
2023-09-04 07:34:09 +02:00
func findBlocksWithEthTransfers ( parent context . Context , client balance . Reader , cache balance . Cacher ,
2023-06-01 15:09:50 +02:00
account common . Address , low , high * big . Int , noLimit bool , threadLimit uint32 ) (
from * big . Int , headers [ ] * DBHeader , resStartBlock * big . Int , err error ) {
2023-05-08 08:02:00 +02:00
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
ranges := [ ] [ ] * big . Int { { low , high } }
2023-05-26 10:27:48 +02:00
from = big . NewInt ( low . Int64 ( ) )
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
headers = [ ] * DBHeader { }
var lvl = 1
2023-05-19 10:19:48 +02:00
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
for len ( ranges ) > 0 && lvl <= 30 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "check blocks ranges" ,
zap . Int ( "lvl" , lvl ) ,
zap . Int ( "ranges len" , len ( ranges ) ) ,
)
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
lvl ++
2023-05-19 10:19:48 +02:00
// Check if there are transfers in blocks in ranges. To do that, nonce and balance is checked
// the block ranges that have transfers are returned
newRanges , newHeaders , strtBlock , err := checkRangesWithStartBlock ( parent , client , cache ,
2023-06-01 15:09:50 +02:00
account , ranges , threadLimit , resStartBlock )
2023-05-19 10:19:48 +02:00
resStartBlock = strtBlock
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
if err != nil {
2023-05-19 10:19:48 +02:00
return nil , nil , nil , err
2019-06-14 13:16:30 +03:00
}
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
headers = append ( headers , newHeaders ... )
if len ( newRanges ) > 0 {
parent 3179532b645549c103266e007694d2c81a7091b4
author shashankshampi <shashank.sanket1995@gmail.com> 1729780155 +0530
committer shashankshampi <shashank.sanket1995@gmail.com> 1730274350 +0530
test: Code Migration from status-cli-tests
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
fix(ci)_: remove workspace and tmp dir
This ensures we do not encounter weird errors like:
```
+ ln -s /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907 /home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go
ln: failed to create symbolic link '/home/jenkins/workspace/go_prs_linux_x86_64_main_PR-5907@tmp/go/src/github.com/status-im/status-go': File exists
script returned exit code 1
```
Signed-off-by: Jakub Sokołowski <jakub@status.im>
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
cleanup
added logger and cleanup
review comments changes
fix_: functional tests (#5979)
* fix_: generate on test-functional
* chore(test)_: fix functional test assertion
---------
Co-authored-by: Siddarth Kumar <siddarthkay@gmail.com>
feat(accounts)_: cherry-pick Persist acceptance of Terms of Use & Privacy policy (#5766) (#5977)
* feat(accounts)_: Persist acceptance of Terms of Use & Privacy policy (#5766)
The original GH issue https://github.com/status-im/status-mobile/issues/21113
came from a request from the Legal team. We must show to Status v1 users the new
terms (Terms of Use & Privacy Policy) right after they upgrade to Status v2
from the stores.
The solution we use is to create a flag in the accounts table, named
hasAcceptedTerms. The flag will be set to true on the first account ever
created in v2 and we provide a native call in mobile/status.go#AcceptTerms,
which allows the client to persist the user's choice in case they are upgrading
(from v1 -> v2, or from a v2 older than this PR).
This solution is not the best because we should store the setting in a separate
table, not in the accounts table.
Related Mobile PR https://github.com/status-im/status-mobile/pull/21124
* fix(test)_: Compare addresses using uppercased strings
---------
Co-authored-by: Icaro Motta <icaro.ldm@gmail.com>
test_: restore account (#5960)
feat_: `LogOnPanic` linter (#5969)
* feat_: LogOnPanic linter
* fix_: add missing defer LogOnPanic
* chore_: make vendor
* fix_: tests, address pr comments
* fix_: address pr comments
chore_: enable windows and macos CI build (#5840)
- Added support for Windows and macOS in CI pipelines
- Added missing dependencies for Windows and x86-64-darwin
- Resolved macOS SDK version compatibility for darwin-x86_64
The `mkShell` override was necessary to ensure compatibility with the newer
macOS SDK (version 11.0) for x86_64. The default SDK (10.12) was causing build failures
because of the missing libs and frameworks. OverrideSDK creates a mapping from
the default SDK in all package categories to the requested SDK (11.0).
fix(contacts)_: fix trust status not being saved to cache when changed (#5965)
Fixes https://github.com/status-im/status-desktop/issues/16392
test_: remove port bind
chore(wallet)_: move route execution code to separate module
chore_: replace geth logger with zap logger (#5962)
closes: #6002
feat(telemetry)_: add metrics for message reliability (#5899)
* feat(telemetry)_: track message reliability
Add metrics for dial errors, missed messages,
missed relevant messages, and confirmed delivery.
* fix_: handle error from json marshal
chore_: use zap logger as request logger
iterates: status-im/status-desktop#16536
test_: unique project per run
test_: use docker compose v2, more concrete project name
fix(codecov)_: ignore folders without tests
Otherwise Codecov reports incorrect numbers when making changes.
https://docs.codecov.com/docs/ignoring-paths
Signed-off-by: Jakub Sokołowski <jakub@status.im>
test_: verify schema of signals during init; fix schema verification warnings (#5947)
fix_: update defaultGorushURL (#6011)
fix(tests)_: use non-standard port to avoid conflicts
We have observed `nimbus-eth2` build failures reporting this port:
```json
{
"lvl": "NTC",
"ts": "2024-10-28 13:51:32.308+00:00",
"msg": "REST HTTP server could not be started",
"topics": "beacnde",
"address": "127.0.0.1:5432",
"reason": "(98) Address already in use"
}
```
https://ci.status.im/job/nimbus-eth2/job/platforms/job/linux/job/x86_64/job/main/job/PR-6683/3/
Signed-off-by: Jakub Sokołowski <jakub@status.im>
fix_: create request logger ad-hoc in tests
Fixes `TestCall` failing when run concurrently.
chore_: configure codecov (#6005)
* chore_: configure codecov
* fix_: after_n_builds
2024-10-24 19:59:15 +05:30
logutils . ZapLogger ( ) . Debug ( "found new ranges" ,
zap . Stringer ( "account" , account ) ,
zap . Int ( "lvl" , lvl ) ,
zap . Int ( "new ranges len" , len ( newRanges ) ) ,
)
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
}
2020-01-29 11:08:42 +02:00
if len ( newRanges ) > 60 && ! noLimit {
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
sort . SliceStable ( newRanges , func ( i , j int ) bool {
return newRanges [ i ] [ 0 ] . Cmp ( newRanges [ j ] [ 0 ] ) == 1
} )
newRanges = newRanges [ : 60 ]
2023-05-26 10:27:48 +02:00
from = newRanges [ len ( newRanges ) - 1 ] [ 0 ]
status-im/status-react#9203 Faster tx fetching with less request
*** How it worked before this PR on multiaccount creation:
- On multiacc creation we scanned chain for eth and erc20 transfers. For
each address of a new empty multiaccount this scan required
1. two `eth_getBalance` requests to find out that there is no any
balance change between zero and the last block, for eth transfers
2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests,
for erc20 transfers
- For some reason we scanned an address of the chat account as well, and
also accounts were not deduplicated. So even for an empty multiacc we
scanned chain twice for each chat and main wallet addresses, in result
app had to execute about 400 requests.
- As mentioned above, `eth_getBalance` requests were used to check if
there were any eth transfers, and that caused empty history in case
if user already used all available eth (so that both zero and latest
blocks show 0 eth for an address). There might have been transactions
but we wouldn't fetch/show them.
- There was no upper limit for the number of rpc requests during the
scan, so it could require indefinite number of requests; the scanning
algorithm was written so that we persisted the whole history of
transactions or tried to scan form the beginning again in case of
failure, giving up only after 10 minutes of failures. In result
addresses with sufficient number of transactions would never be fully
scanned and during these 10 minutes app could use gigabytes of
internet data.
- Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash`
requests. These requests return significantly bigger responses than
`eth_getBalance`/`eth_transactionsCount` and it is likely that
execution of thousands of them in parallel caused failures for
accounts with hundreds of transactions. Even for an account with 12k
we could successfully determine blocks with transaction in a few
minutes using `eth_getBalance` requests, but `eth_getBlock...`
couldn't be processed for this acc.
- There was no caching for for `eth_getBalance` requests, and this
caused in average 3-4 times more such requests than is needed.
*** How it works now on multiaccount creation:
- On multiacc creation we scan chain for last ~30 eth transactions and
then check erc20 in the range where these eth transactions were found.
For an empty address in multiacc this means:
1. two `eth_getBalance` transactions to determine that there was no
balance change between zero and the last block; two
`eth_transactionsCount` requests to determine there are no outgoing
transactions for this address; total 4 requests for eth transfers
2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered,
but that's not a big deal
- Deduplication of addresses is added and also we don't scan chat
account, so a new multiacc requires ~25 (we also request latest block
number and probably execute a few other calls) request to determine
that multiacc is empty (comparing to ~400 before)
- In case if address contains transactions we:
1. determine the range which contains 20-25 outgoing eth/erc20
transactions. This usually requires up to 10 `eth_transactionCount`
requests
2. then we scan chain for eth transfers using `eth_getBalance` and
`eth_transactionCount` (for double checking zero balances)
3. we make sure that we do not scan db for more than 30 blocks with
transfers. That's important for accounts with mostly incoming
transactions, because the range found on the first step might
contain any number of incoming transfers, but only 20-25 outgoing
transactions
4. when we found ~30 blocks in a given range, we update initial
range `from` block using the oldest found block
5. and now we scan db for erc20transfers using `eth_getLogs`
`oldest-found-eth-block`-`latest-block`, we make not more than 20 calls
6. when all blocks which contain incoming/outgoing transfers for a
given address are found, we save these blocks to db and mark that
transfers from these blocks are still to be fetched
7. Then we select latest ~30 (the number can be adjusted) blocks from
these which were found and fetch transfers, this requires 3-4
requests per transfer.
8. we persist scanned range so that we know were to start next time
9. we dispatch an event which tells client that transactions are found
10. client fetches latest 20 transfers
- when user presses "fetch more" button we check if app's db contains next
20 transfers, if not we scan chain again and return transfers after
small fixes
2019-12-18 13:01:46 +02:00
}
ranges = newRanges
}
2023-05-26 10:27:48 +02:00
return
2019-06-14 13:16:30 +03:00
}