status-go/vendor/github.com/gballet/go-libpcsclite/error.go

247 lines
12 KiB
Go
Raw Normal View History

// BSD 3-Clause License
//
// Copyright (c) 2019, Guillaume Ballet
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice, this
// list of conditions and the following disclaimer.
//
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// * Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
package pcsc
import "fmt"
type ErrorCode uint32
const (
SCardSuccess ErrorCode = 0x00000000 /* No error was encountered. */
ErrSCardInternal ErrorCode = 0x80100001 /* An internal consistency check failed. */
ErrSCardCancelled ErrorCode = 0x80100002 /* The action was cancelled by an SCardCancel request. */
ErrSCardInvalidHandle ErrorCode = 0x80100003 /* The supplied handle was invalid. */
ErrSCardInvalidParameter ErrorCode = 0x80100004 /* One or more of the supplied parameters could not be properly interpreted. */
ErrSCardInvalidTarget ErrorCode = 0x80100005 /* Registry startup information is missing or invalid. */
ErrSCardNoMemory ErrorCode = 0x80100006 /* Not enough memory available to complete this command. */
ErrSCardWaitedTooLong ErrorCode = 0x80100007 /* An internal consistency timer has expired. */
ErrSCardInsufficientBuffer ErrorCode = 0x80100008 /* The data buffer to receive returned data is too small for the returned data. */
ErrScardUnknownReader ErrorCode = 0x80100009 /* The specified reader name is not recognized. */
ErrSCardTimeout ErrorCode = 0x8010000A /* The user-specified timeout value has expired. */
ErrSCardSharingViolation ErrorCode = 0x8010000B /* The smart card cannot be accessed because of other connections outstanding. */
ErrSCardNoSmartCard ErrorCode = 0x8010000C /* The operation requires a Smart Card, but no Smart Card is currently in the device. */
ErrSCardUnknownCard ErrorCode = 0x8010000D /* The specified smart card name is not recognized. */
ErrSCardCannotDispose ErrorCode = 0x8010000E /* The system could not dispose of the media in the requested manner. */
ErrSCardProtoMismatch ErrorCode = 0x8010000F /* The requested protocols are incompatible with the protocol currently in use with the smart card. */
ErrSCardNotReady ErrorCode = 0x80100010 /* The reader or smart card is not ready to accept commands. */
ErrSCardInvalidValue ErrorCode = 0x80100011 /* One or more of the supplied parameters values could not be properly interpreted. */
ErrSCardSystemCancelled ErrorCode = 0x80100012 /* The action was cancelled by the system, presumably to log off or shut down. */
ErrSCardCommError ErrorCode = 0x80100013 /* An internal communications error has been detected. */
ErrScardUnknownError ErrorCode = 0x80100014 /* An internal error has been detected, but the source is unknown. */
ErrSCardInvalidATR ErrorCode = 0x80100015 /* An ATR obtained from the registry is not a valid ATR string. */
ErrSCardNotTransacted ErrorCode = 0x80100016 /* An attempt was made to end a non-existent transaction. */
ErrSCardReaderUnavailable ErrorCode = 0x80100017 /* The specified reader is not currently available for use. */
ErrSCardShutdown ErrorCode = 0x80100018 /* The operation has been aborted to allow the server application to exit. */
ErrSCardPCITooSmall ErrorCode = 0x80100019 /* The PCI Receive buffer was too small. */
ErrSCardReaderUnsupported ErrorCode = 0x8010001A /* The reader driver does not meet minimal requirements for support. */
ErrSCardDuplicateReader ErrorCode = 0x8010001B /* The reader driver did not produce a unique reader name. */
ErrSCardCardUnsupported ErrorCode = 0x8010001C /* The smart card does not meet minimal requirements for support. */
ErrScardNoService ErrorCode = 0x8010001D /* The Smart card resource manager is not running. */
ErrSCardServiceStopped ErrorCode = 0x8010001E /* The Smart card resource manager has shut down. */
ErrSCardUnexpected ErrorCode = 0x8010001F /* An unexpected card error has occurred. */
ErrSCardUnsupportedFeature ErrorCode = 0x8010001F /* This smart card does not support the requested feature. */
ErrSCardICCInstallation ErrorCode = 0x80100020 /* No primary provider can be found for the smart card. */
ErrSCardICCCreateOrder ErrorCode = 0x80100021 /* The requested order of object creation is not supported. */
ErrSCardDirNotFound ErrorCode = 0x80100023 /* The identified directory does not exist in the smart card. */
ErrSCardFileNotFound ErrorCode = 0x80100024 /* The identified file does not exist in the smart card. */
ErrSCardNoDir ErrorCode = 0x80100025 /* The supplied path does not represent a smart card directory. */
ErrSCardNoFile ErrorCode = 0x80100026 /* The supplied path does not represent a smart card file. */
ErrScardNoAccess ErrorCode = 0x80100027 /* Access is denied to this file. */
ErrSCardWriteTooMany ErrorCode = 0x80100028 /* The smart card does not have enough memory to store the information. */
ErrSCardBadSeek ErrorCode = 0x80100029 /* There was an error trying to set the smart card file object pointer. */
ErrSCardInvalidCHV ErrorCode = 0x8010002A /* The supplied PIN is incorrect. */
ErrSCardUnknownResMNG ErrorCode = 0x8010002B /* An unrecognized error code was returned from a layered component. */
ErrSCardNoSuchCertificate ErrorCode = 0x8010002C /* The requested certificate does not exist. */
ErrSCardCertificateUnavailable ErrorCode = 0x8010002D /* The requested certificate could not be obtained. */
ErrSCardNoReadersAvailable ErrorCode = 0x8010002E /* Cannot find a smart card reader. */
ErrSCardCommDataLost ErrorCode = 0x8010002F /* A communications error with the smart card has been detected. Retry the operation. */
ErrScardNoKeyContainer ErrorCode = 0x80100030 /* The requested key container does not exist on the smart card. */
ErrSCardServerTooBusy ErrorCode = 0x80100031 /* The Smart Card Resource Manager is too busy to complete this operation. */
ErrSCardUnsupportedCard ErrorCode = 0x80100065 /* The reader cannot communicate with the card, due to ATR string configuration conflicts. */
ErrSCardUnresponsiveCard ErrorCode = 0x80100066 /* The smart card is not responding to a reset. */
ErrSCardUnpoweredCard ErrorCode = 0x80100067 /* Power has been removed from the smart card, so that further communication is not possible. */
ErrSCardResetCard ErrorCode = 0x80100068 /* The smart card has been reset, so any shared state information is invalid. */
ErrSCardRemovedCard ErrorCode = 0x80100069 /* The smart card has been removed, so further communication is not possible. */
ErrSCardSecurityViolation ErrorCode = 0x8010006A /* Access was denied because of a security violation. */
ErrSCardWrongCHV ErrorCode = 0x8010006B /* The card cannot be accessed because the wrong PIN was presented. */
ErrSCardCHVBlocked ErrorCode = 0x8010006C /* The card cannot be accessed because the maximum number of PIN entry attempts has been reached. */
ErrSCardEOF ErrorCode = 0x8010006D /* The end of the smart card file has been reached. */
ErrSCardCancelledByUser ErrorCode = 0x8010006E /* The user pressed "Cancel" on a Smart Card Selection Dialog. */
ErrSCardCardNotAuthenticated ErrorCode = 0x8010006F /* No PIN was presented to the smart card. */
)
// Code returns the error code, with an uint32 type to be used in PutUInt32
func (code ErrorCode) Code() uint32 {
return uint32(code)
}
func (code ErrorCode) Error() error {
switch code {
case SCardSuccess:
return fmt.Errorf("command successful")
case ErrSCardInternal:
return fmt.Errorf("internal error")
case ErrSCardCancelled:
return fmt.Errorf("command cancelled")
case ErrSCardInvalidHandle:
return fmt.Errorf("invalid handle")
case ErrSCardInvalidParameter:
return fmt.Errorf("invalid parameter given")
case ErrSCardInvalidTarget:
return fmt.Errorf("invalid target given")
case ErrSCardNoMemory:
return fmt.Errorf("not enough memory")
case ErrSCardWaitedTooLong:
return fmt.Errorf("waited too long")
case ErrSCardInsufficientBuffer:
return fmt.Errorf("insufficient buffer")
case ErrScardUnknownReader:
return fmt.Errorf("unknown reader specified")
case ErrSCardTimeout:
return fmt.Errorf("command timeout")
case ErrSCardSharingViolation:
return fmt.Errorf("sharing violation")
case ErrSCardNoSmartCard:
return fmt.Errorf("no smart card inserted")
case ErrSCardUnknownCard:
return fmt.Errorf("unknown card")
case ErrSCardCannotDispose:
return fmt.Errorf("cannot dispose handle")
case ErrSCardProtoMismatch:
return fmt.Errorf("card protocol mismatch")
case ErrSCardNotReady:
return fmt.Errorf("subsystem not ready")
case ErrSCardInvalidValue:
return fmt.Errorf("invalid value given")
case ErrSCardSystemCancelled:
return fmt.Errorf("system cancelled")
case ErrSCardCommError:
return fmt.Errorf("rpc transport error")
case ErrScardUnknownError:
return fmt.Errorf("unknown error")
case ErrSCardInvalidATR:
return fmt.Errorf("invalid ATR")
case ErrSCardNotTransacted:
return fmt.Errorf("transaction failed")
case ErrSCardReaderUnavailable:
return fmt.Errorf("reader is unavailable")
/* case SCARD_P_SHUTDOWN: */
case ErrSCardPCITooSmall:
return fmt.Errorf("PCI struct too small")
case ErrSCardReaderUnsupported:
return fmt.Errorf("reader is unsupported")
case ErrSCardDuplicateReader:
return fmt.Errorf("reader already exists")
case ErrSCardCardUnsupported:
return fmt.Errorf("card is unsupported")
case ErrScardNoService:
return fmt.Errorf("service not available")
case ErrSCardServiceStopped:
return fmt.Errorf("service was stopped")
/* case SCARD_E_UNEXPECTED: */
/* case SCARD_E_ICC_CREATEORDER: */
/* case SCARD_E_UNSUPPORTED_FEATURE: */
/* case SCARD_E_DIR_NOT_FOUND: */
/* case SCARD_E_NO_DIR: */
/* case SCARD_E_NO_FILE: */
/* case SCARD_E_NO_ACCESS: */
/* case SCARD_E_WRITE_TOO_MANY: */
/* case SCARD_E_BAD_SEEK: */
/* case SCARD_E_INVALID_CHV: */
/* case SCARD_E_UNKNOWN_RES_MNG: */
/* case SCARD_E_NO_SUCH_CERTIFICATE: */
/* case SCARD_E_CERTIFICATE_UNAVAILABLE: */
case ErrSCardNoReadersAvailable:
return fmt.Errorf("cannot find a smart card reader")
/* case SCARD_E_COMM_DATA_LOST: */
/* case SCARD_E_NO_KEY_CONTAINER: */
/* case SCARD_E_SERVER_TOO_BUSY: */
case ErrSCardUnsupportedCard:
return fmt.Errorf("Card is not supported")
case ErrSCardUnresponsiveCard:
return fmt.Errorf("Card is unresponsive")
case ErrSCardUnpoweredCard:
return fmt.Errorf("Card is unpowered")
case ErrSCardResetCard:
return fmt.Errorf("Card was reset")
case ErrSCardRemovedCard:
return fmt.Errorf("Card was removed")
/* case SCARD_W_SECURITY_VIOLATION: */
/* case SCARD_W_WRONG_CHV: */
/* case SCARD_W_CHV_BLOCKED: */
/* case SCARD_W_EOF: */
/* case SCARD_W_CANCELLED_BY_USER: */
/* case SCARD_W_CARD_NOT_AUTHENTICATED: */
case ErrSCardUnsupportedFeature:
return fmt.Errorf("feature not supported")
default:
return fmt.Errorf("unknown error: %08x", code)
}
}