status-go/services/wallet/transfer/commands.go

598 lines
19 KiB
Go
Raw Normal View History

package transfer
import (
"context"
"database/sql"
"math/big"
"time"
"golang.org/x/exp/maps"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/core/types"
"github.com/ethereum/go-ethereum/event"
"github.com/ethereum/go-ethereum/log"
2023-02-20 09:32:45 +00:00
"github.com/status-im/status-go/rpc/chain"
"github.com/status-im/status-go/services/wallet/async"
"github.com/status-im/status-go/services/wallet/balance"
w_common "github.com/status-im/status-go/services/wallet/common"
"github.com/status-im/status-go/services/wallet/token"
"github.com/status-im/status-go/services/wallet/walletevent"
"github.com/status-im/status-go/transactions"
)
const (
// EventNewTransfers emitted when new block was added to the same canonical chan.
EventNewTransfers walletevent.EventType = "new-transfers"
// EventFetchingRecentHistory emitted when fetching of lastest tx history is started
EventFetchingRecentHistory walletevent.EventType = "recent-history-fetching"
// EventRecentHistoryReady emitted when fetching of lastest tx history is started
EventRecentHistoryReady walletevent.EventType = "recent-history-ready"
// EventFetchingHistoryError emitted when fetching of tx history failed
EventFetchingHistoryError walletevent.EventType = "fetching-history-error"
// EventNonArchivalNodeDetected emitted when a connection to a non archival node is detected
EventNonArchivalNodeDetected walletevent.EventType = "non-archival-node-detected"
// Internal events emitted when different kinds of transfers are detected
EventInternalETHTransferDetected walletevent.EventType = walletevent.InternalEventTypePrefix + "eth-transfer-detected"
EventInternalERC20TransferDetected walletevent.EventType = walletevent.InternalEventTypePrefix + "erc20-transfer-detected"
EventInternalERC721TransferDetected walletevent.EventType = walletevent.InternalEventTypePrefix + "erc721-transfer-detected"
EventInternalERC1155TransferDetected walletevent.EventType = walletevent.InternalEventTypePrefix + "erc1155-transfer-detected"
numberOfBlocksCheckedPerIteration = 40
noBlockLimit = 0
)
2021-11-24 12:59:45 +00:00
var (
// This will work only for binance testnet as mainnet doesn't support
// archival request.
binanceChainErc20BatchSize = big.NewInt(5000)
goerliErc20BatchSize = big.NewInt(100000)
goerliErc20ArbitrumBatchSize = big.NewInt(10000)
goerliErc20OptimismBatchSize = big.NewInt(10000)
erc20BatchSize = big.NewInt(500000)
binancChainID = uint64(56)
goerliChainID = uint64(5)
goerliArbitrumChainID = uint64(421613)
goerliOptimismChainID = uint64(420)
binanceTestChainID = uint64(97)
2021-11-24 12:59:45 +00:00
)
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
type ethHistoricalCommand struct {
address common.Address
2023-09-19 11:17:36 +00:00
chainClient chain.ClientInterface
balanceCacher balance.Cacher
feed *event.Feed
foundHeaders []*DBHeader
error error
noLimit bool
from *Block
to, resultingFrom, startBlock *big.Int
threadLimit uint32
}
type Transaction []*Transfer
func (c *ethHistoricalCommand) Command() async.Command {
return async.FiniteCommand{
Interval: 5 * time.Second,
Runable: c.Run,
}.Run
}
func (c *ethHistoricalCommand) Run(ctx context.Context) (err error) {
log.Debug("eth historical downloader start", "chainID", c.chainClient.NetworkID(), "address", c.address,
"from", c.from.Number, "to", c.to, "noLimit", c.noLimit)
start := time.Now()
if c.from.Number != nil && c.from.Balance != nil {
2023-09-19 11:17:36 +00:00
c.balanceCacher.Cache().AddBalance(c.address, c.chainClient.NetworkID(), c.from.Number, c.from.Balance)
}
if c.from.Number != nil && c.from.Nonce != nil {
2023-09-19 11:17:36 +00:00
c.balanceCacher.Cache().AddNonce(c.address, c.chainClient.NetworkID(), c.from.Number, c.from.Nonce)
}
from, headers, startBlock, err := findBlocksWithEthTransfers(ctx, c.chainClient,
c.balanceCacher, c.address, c.from.Number, c.to, c.noLimit, c.threadLimit)
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
if err != nil {
2020-12-30 15:46:47 +00:00
c.error = err
2023-09-19 11:17:36 +00:00
log.Error("failed to find blocks with transfers", "error", err, "chainID", c.chainClient.NetworkID(),
"address", c.address, "from", c.from.Number, "to", c.to)
2020-12-30 15:46:47 +00:00
return nil
}
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
c.foundHeaders = headers
c.resultingFrom = from
c.startBlock = startBlock
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
log.Debug("eth historical downloader finished successfully", "chain", c.chainClient.NetworkID(),
"address", c.address, "from", from, "to", c.to, "total blocks", len(headers), "time", time.Since(start))
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
return nil
}
type erc20HistoricalCommand struct {
erc20 BatchDownloader
2023-09-19 11:17:36 +00:00
chainClient chain.ClientInterface
feed *event.Feed
iterator *IterativeDownloader
to *big.Int
from *big.Int
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
foundHeaders []*DBHeader
}
func (c *erc20HistoricalCommand) Command() async.Command {
return async.FiniteCommand{
Interval: 5 * time.Second,
Runable: c.Run,
}.Run
}
2021-11-24 12:59:45 +00:00
func getErc20BatchSize(chainID uint64) *big.Int {
if isBinanceChain(chainID) {
return binanceChainErc20BatchSize
}
if chainID == goerliChainID {
return goerliErc20BatchSize
}
if chainID == goerliOptimismChainID {
return goerliErc20OptimismBatchSize
}
2023-03-28 12:46:46 +00:00
if chainID == goerliArbitrumChainID {
return goerliErc20ArbitrumBatchSize
}
2021-11-24 12:59:45 +00:00
return erc20BatchSize
}
func (c *erc20HistoricalCommand) Run(ctx context.Context) (err error) {
log.Debug("wallet historical downloader for erc20 transfers start", "chainID", c.chainClient.NetworkID(),
"from", c.from, "to", c.to)
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
start := time.Now()
if c.iterator == nil {
c.iterator, err = SetupIterativeDownloader(
c.chainClient,
2023-09-19 11:17:36 +00:00
c.erc20, getErc20BatchSize(c.chainClient.NetworkID()), c.to, c.from)
if err != nil {
log.Error("failed to setup historical downloader for erc20")
return err
}
}
for !c.iterator.Finished() {
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
headers, _, _, err := c.iterator.Next(ctx)
if err != nil {
log.Error("failed to get next batch", "error", err, "chainID", c.chainClient.NetworkID()) // TODO: stop inifinite command in case of an error that we can't fix like missing trie node
return err
}
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
c.foundHeaders = append(c.foundHeaders, headers...)
}
log.Debug("wallet historical downloader for erc20 transfers finished", "chainID", c.chainClient.NetworkID(),
"from", c.from, "to", c.to, "time", time.Since(start), "headers", len(c.foundHeaders))
return nil
}
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
type transfersCommand struct {
db *Database
blockDAO *BlockDAO
eth *ETHDownloader
blockNums []*big.Int
address common.Address
chainClient chain.ClientInterface
blocksLimit int
transactionManager *TransactionManager
pendingTxManager *transactions.PendingTxTracker
tokenManager *token.Manager
feed *event.Feed
// result
fetchedTransfers []Transfer
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
}
func (c *transfersCommand) Command() async.Command {
return async.FiniteCommand{
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
Interval: 5 * time.Second,
Runable: c.Run,
}.Run
}
func (c *transfersCommand) Run(ctx context.Context) (err error) {
// Take blocks from cache if available and disrespect the limit
// If no blocks are available in cache, take blocks from DB respecting the limit
// If no limit is set, take all blocks from DB
log.Debug("start transfersCommand", "chain", c.chainClient.NetworkID(), "address", c.address, "blockNums", c.blockNums)
startTs := time.Now()
for {
blocks := c.blockNums
if blocks == nil {
2023-09-19 11:17:36 +00:00
blocks, _ = c.blockDAO.GetBlocksToLoadByAddress(c.chainClient.NetworkID(), c.address, numberOfBlocksCheckedPerIteration)
}
for _, blockNum := range blocks {
2023-09-19 11:17:36 +00:00
log.Debug("transfersCommand block start", "chain", c.chainClient.NetworkID(), "address", c.address, "block", blockNum)
allTransfers, err := c.eth.GetTransfersByNumber(ctx, blockNum)
if err != nil {
log.Error("getTransfersByBlocks error", "error", err)
return err
}
2023-08-31 07:47:24 +00:00
c.processUnknownErc20CommunityTransactions(ctx, allTransfers)
err = c.processMultiTransactions(ctx, allTransfers)
if err != nil {
log.Error("processMultiTransactions error", "error", err)
return err
}
if len(allTransfers) > 0 {
err := c.saveAndConfirmPending(allTransfers, blockNum)
if err != nil {
log.Error("saveAndConfirmPending error", "error", err)
return err
}
} else {
// If no transfers found, that is suspecting, because downloader returned this block as containing transfers
2023-09-19 11:17:36 +00:00
log.Error("no transfers found in block", "chain", c.chainClient.NetworkID(), "address", c.address, "block", blockNum)
2023-09-19 11:17:36 +00:00
err = markBlocksAsLoaded(c.chainClient.NetworkID(), c.db.client, c.address, []*big.Int{blockNum})
if err != nil {
log.Error("Mark blocks loaded error", "error", err)
return err
}
}
c.fetchedTransfers = append(c.fetchedTransfers, allTransfers...)
c.notifyOfNewTransfers(blockNum, allTransfers)
c.notifyOfLatestTransfers(allTransfers, w_common.EthTransfer)
c.notifyOfLatestTransfers(allTransfers, w_common.Erc20Transfer)
c.notifyOfLatestTransfers(allTransfers, w_common.Erc721Transfer)
c.notifyOfLatestTransfers(allTransfers, w_common.Erc1155Transfer)
2023-09-19 11:17:36 +00:00
log.Debug("transfersCommand block end", "chain", c.chainClient.NetworkID(), "address", c.address,
"block", blockNum, "tranfers.len", len(allTransfers), "fetchedTransfers.len", len(c.fetchedTransfers))
}
if c.blockNums != nil || len(blocks) == 0 ||
(c.blocksLimit > noBlockLimit && len(blocks) >= c.blocksLimit) {
2023-09-19 11:17:36 +00:00
log.Debug("loadTransfers breaking loop on block limits reached or 0 blocks", "chain", c.chainClient.NetworkID(),
"address", c.address, "limit", c.blocksLimit, "blocks", len(blocks))
break
}
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
}
log.Debug("end transfersCommand", "chain", c.chainClient.NetworkID(), "address", c.address,
"blocks.len", len(c.blockNums), "transfers.len", len(c.fetchedTransfers), "in", time.Since(startTs))
return nil
}
// saveAndConfirmPending ensures only the transaction that has owner (Address) as a sender is matched to the
// corresponding multi-transaction (by multi-transaction ID). This way we ensure that if receiver is in the list
// of accounts filter will discard the proper one
func (c *transfersCommand) saveAndConfirmPending(allTransfers []Transfer, blockNum *big.Int) error {
tx, resErr := c.db.client.Begin()
if resErr != nil {
return resErr
}
notifyFunctions := make([]func(), 0)
defer func() {
if resErr == nil {
commitErr := tx.Commit()
if commitErr != nil {
log.Error("failed to commit", "error", commitErr)
}
for _, notify := range notifyFunctions {
notify()
}
} else {
rollbackErr := tx.Rollback()
if rollbackErr != nil {
log.Error("failed to rollback", "error", rollbackErr)
}
}
}()
// Confirm all pending transactions that are included in this block
for i, tr := range allTransfers {
chainID := w_common.ChainID(tr.NetworkID)
txHash := tr.Receipt.TxHash
txType, mTID, err := transactions.GetOwnedPendingStatus(tx, chainID, txHash, tr.Address)
if err == sql.ErrNoRows {
if tr.MultiTransactionID > 0 {
continue
} else {
// Outside transaction, already confirmed by another duplicate or not yet downloaded
existingMTID, err := GetOwnedMultiTransactionID(tx, chainID, tr.ID, tr.Address)
if err == sql.ErrNoRows || existingMTID == 0 {
// Outside transaction, ignore it
continue
} else if err != nil {
log.Warn("GetOwnedMultiTransactionID", "error", err)
continue
}
mTID = w_common.NewAndSet(existingMTID)
}
} else if err != nil {
log.Warn("GetOwnedPendingStatus", "error", err)
continue
}
if mTID != nil {
allTransfers[i].MultiTransactionID = MultiTransactionIDType(*mTID)
}
if txType != nil && *txType == transactions.WalletTransfer {
notify, err := c.pendingTxManager.DeleteBySQLTx(tx, chainID, txHash)
if err != nil && err != transactions.ErrStillPending {
log.Error("DeleteBySqlTx error", "error", err)
}
notifyFunctions = append(notifyFunctions, notify)
}
}
2023-09-19 11:17:36 +00:00
resErr = saveTransfersMarkBlocksLoaded(tx, c.chainClient.NetworkID(), c.address, allTransfers, []*big.Int{blockNum})
if resErr != nil {
log.Error("SaveTransfers error", "error", resErr)
}
return resErr
}
// Mark all subTxs of a given Tx with the same multiTxID
func setMultiTxID(tx Transaction, multiTxID MultiTransactionIDType) {
for _, subTx := range tx {
subTx.MultiTransactionID = multiTxID
}
}
func (c *transfersCommand) checkAndProcessSwapMultiTx(ctx context.Context, tx Transaction) (bool, error) {
for _, subTx := range tx {
switch subTx.Type {
// If the Tx contains any uniswapV2Swap/uniswapV3Swap subTx, generate a Swap multiTx
case w_common.UniswapV2Swap, w_common.UniswapV3Swap:
multiTransaction, err := buildUniswapSwapMultitransaction(ctx, c.chainClient, c.tokenManager, subTx)
if err != nil {
return false, err
}
if multiTransaction != nil {
id, err := c.transactionManager.InsertMultiTransaction(multiTransaction)
if err != nil {
return false, err
}
setMultiTxID(tx, id)
return true, nil
}
}
}
return false, nil
}
func (c *transfersCommand) checkAndProcessBridgeMultiTx(ctx context.Context, tx Transaction) (bool, error) {
for _, subTx := range tx {
switch subTx.Type {
// If the Tx contains any hopBridge subTx, create/update Bridge multiTx
case w_common.HopBridgeFrom, w_common.HopBridgeTo:
multiTransaction, err := buildHopBridgeMultitransaction(ctx, c.chainClient, c.transactionManager, c.tokenManager, subTx)
if err != nil {
return false, err
}
if multiTransaction != nil {
setMultiTxID(tx, MultiTransactionIDType(multiTransaction.ID))
return true, nil
}
}
}
return false, nil
}
2023-08-31 07:47:24 +00:00
func (c *transfersCommand) processUnknownErc20CommunityTransactions(ctx context.Context, allTransfers []Transfer) {
for _, tx := range allTransfers {
if tx.Type == w_common.Erc20Transfer {
// Find token in db or if this is a community token, find its metadata
_ = c.tokenManager.FindOrCreateTokenByAddress(ctx, tx.NetworkID, *tx.Transaction.To())
}
}
}
func (c *transfersCommand) processMultiTransactions(ctx context.Context, allTransfers []Transfer) error {
txByTxHash := subTransactionListToTransactionsByTxHash(allTransfers)
// Detect / Generate multitransactions
// Iterate over all detected transactions
for _, tx := range txByTxHash {
// Then check for a Swap transaction
txProcessed, err := c.checkAndProcessSwapMultiTx(ctx, tx)
if err != nil {
return err
}
if txProcessed {
continue
}
// Then check for a Bridge transaction
_, err = c.checkAndProcessBridgeMultiTx(ctx, tx)
if err != nil {
return err
}
}
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
return nil
}
func (c *transfersCommand) notifyOfNewTransfers(blockNum *big.Int, transfers []Transfer) {
if c.feed != nil {
if len(transfers) > 0 {
c.feed.Send(walletevent.Event{
Type: EventNewTransfers,
Accounts: []common.Address{c.address},
ChainID: c.chainClient.NetworkID(),
BlockNumber: blockNum,
})
}
}
}
func transferTypeToEventType(transferType w_common.Type) walletevent.EventType {
switch transferType {
case w_common.EthTransfer:
return EventInternalETHTransferDetected
case w_common.Erc20Transfer:
return EventInternalERC20TransferDetected
case w_common.Erc721Transfer:
return EventInternalERC721TransferDetected
case w_common.Erc1155Transfer:
return EventInternalERC1155TransferDetected
default:
return ""
}
}
func (c *transfersCommand) notifyOfLatestTransfers(transfers []Transfer, transferType w_common.Type) {
if c.feed != nil {
latestTransferTimestamp := uint64(0)
for _, transfer := range transfers {
if transfer.Type == transferType {
if transfer.Timestamp > latestTransferTimestamp {
latestTransferTimestamp = transfer.Timestamp
}
}
}
if latestTransferTimestamp > 0 {
c.feed.Send(walletevent.Event{
Type: transferTypeToEventType(transferType),
Accounts: []common.Address{c.address},
ChainID: c.chainClient.NetworkID(),
At: int64(latestTransferTimestamp),
})
}
}
}
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
type loadTransfersCommand struct {
accounts []common.Address
db *Database
blockDAO *BlockDAO
chainClient chain.ClientInterface
blocksByAddress map[common.Address][]*big.Int
transactionManager *TransactionManager
pendingTxManager *transactions.PendingTxTracker
blocksLimit int
tokenManager *token.Manager
feed *event.Feed
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
}
func (c *loadTransfersCommand) Command() async.Command {
return async.FiniteCommand{
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
Interval: 5 * time.Second,
Runable: c.Run,
}.Run
}
func (c *loadTransfersCommand) LoadTransfers(ctx context.Context, limit int, blocksByAddress map[common.Address][]*big.Int) error {
return loadTransfers(ctx, c.blockDAO, c.db, c.chainClient, limit, blocksByAddress,
c.transactionManager, c.pendingTxManager, c.tokenManager, c.feed)
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
}
func (c *loadTransfersCommand) Run(parent context.Context) (err error) {
err = c.LoadTransfers(parent, c.blocksLimit, c.blocksByAddress)
status-im/status-react#9203 Faster tx fetching with less request *** How it worked before this PR on multiaccount creation: - On multiacc creation we scanned chain for eth and erc20 transfers. For each address of a new empty multiaccount this scan required 1. two `eth_getBalance` requests to find out that there is no any balance change between zero and the last block, for eth transfers 2. and `chain-size/100000` (currently ~100) `eth_getLogs` requests, for erc20 transfers - For some reason we scanned an address of the chat account as well, and also accounts were not deduplicated. So even for an empty multiacc we scanned chain twice for each chat and main wallet addresses, in result app had to execute about 400 requests. - As mentioned above, `eth_getBalance` requests were used to check if there were any eth transfers, and that caused empty history in case if user already used all available eth (so that both zero and latest blocks show 0 eth for an address). There might have been transactions but we wouldn't fetch/show them. - There was no upper limit for the number of rpc requests during the scan, so it could require indefinite number of requests; the scanning algorithm was written so that we persisted the whole history of transactions or tried to scan form the beginning again in case of failure, giving up only after 10 minutes of failures. In result addresses with sufficient number of transactions would never be fully scanned and during these 10 minutes app could use gigabytes of internet data. - Failures were caused by `eth_getBlockByNumber`/`eth_getBlockByHash` requests. These requests return significantly bigger responses than `eth_getBalance`/`eth_transactionsCount` and it is likely that execution of thousands of them in parallel caused failures for accounts with hundreds of transactions. Even for an account with 12k we could successfully determine blocks with transaction in a few minutes using `eth_getBalance` requests, but `eth_getBlock...` couldn't be processed for this acc. - There was no caching for for `eth_getBalance` requests, and this caused in average 3-4 times more such requests than is needed. *** How it works now on multiaccount creation: - On multiacc creation we scan chain for last ~30 eth transactions and then check erc20 in the range where these eth transactions were found. For an empty address in multiacc this means: 1. two `eth_getBalance` transactions to determine that there was no balance change between zero and the last block; two `eth_transactionsCount` requests to determine there are no outgoing transactions for this address; total 4 requests for eth transfers 2. 20 `eth_getLogs` for erc20 transfers. This number can be lowered, but that's not a big deal - Deduplication of addresses is added and also we don't scan chat account, so a new multiacc requires ~25 (we also request latest block number and probably execute a few other calls) request to determine that multiacc is empty (comparing to ~400 before) - In case if address contains transactions we: 1. determine the range which contains 20-25 outgoing eth/erc20 transactions. This usually requires up to 10 `eth_transactionCount` requests 2. then we scan chain for eth transfers using `eth_getBalance` and `eth_transactionCount` (for double checking zero balances) 3. we make sure that we do not scan db for more than 30 blocks with transfers. That's important for accounts with mostly incoming transactions, because the range found on the first step might contain any number of incoming transfers, but only 20-25 outgoing transactions 4. when we found ~30 blocks in a given range, we update initial range `from` block using the oldest found block 5. and now we scan db for erc20transfers using `eth_getLogs` `oldest-found-eth-block`-`latest-block`, we make not more than 20 calls 6. when all blocks which contain incoming/outgoing transfers for a given address are found, we save these blocks to db and mark that transfers from these blocks are still to be fetched 7. Then we select latest ~30 (the number can be adjusted) blocks from these which were found and fetch transfers, this requires 3-4 requests per transfer. 8. we persist scanned range so that we know were to start next time 9. we dispatch an event which tells client that transactions are found 10. client fetches latest 20 transfers - when user presses "fetch more" button we check if app's db contains next 20 transfers, if not we scan chain again and return transfers after small fixes
2019-12-18 11:01:46 +00:00
return
}
func loadTransfers(ctx context.Context, blockDAO *BlockDAO, db *Database,
chainClient chain.ClientInterface, blocksLimitPerAccount int, blocksByAddress map[common.Address][]*big.Int,
transactionManager *TransactionManager, pendingTxManager *transactions.PendingTxTracker,
tokenManager *token.Manager, feed *event.Feed) error {
log.Debug("loadTransfers start", "chain", chainClient.NetworkID(), "limit", blocksLimitPerAccount)
start := time.Now()
group := async.NewGroup(ctx)
accounts := maps.Keys(blocksByAddress)
for _, address := range accounts {
transfers := &transfersCommand{
db: db,
blockDAO: blockDAO,
chainClient: chainClient,
address: address,
eth: &ETHDownloader{
chainClient: chainClient,
accounts: []common.Address{address},
signer: types.LatestSignerForChainID(chainClient.ToBigInt()),
db: db,
},
blockNums: blocksByAddress[address],
transactionManager: transactionManager,
pendingTxManager: pendingTxManager,
tokenManager: tokenManager,
feed: feed,
}
group.Add(transfers.Command())
}
select {
case <-ctx.Done():
return ctx.Err()
case <-group.WaitAsync():
log.Debug("loadTransfers finished for account", "in", time.Since(start), "chain", chainClient.NetworkID())
return nil
}
}
2021-11-24 12:59:45 +00:00
func isBinanceChain(chainID uint64) bool {
return chainID == binancChainID || chainID == binanceTestChainID
}
// Ensure 1 DBHeader per Block Hash
func uniqueHeaderPerBlockHash(allHeaders []*DBHeader) []*DBHeader {
uniqHeadersByHash := map[common.Hash]*DBHeader{}
for _, header := range allHeaders {
uniqHeader, ok := uniqHeadersByHash[header.Hash]
if ok {
if len(header.PreloadedTransactions) > 0 {
uniqHeader.PreloadedTransactions = append(uniqHeader.PreloadedTransactions, header.PreloadedTransactions...)
}
uniqHeadersByHash[header.Hash] = uniqHeader
} else {
uniqHeadersByHash[header.Hash] = header
}
}
uniqHeaders := []*DBHeader{}
for _, header := range uniqHeadersByHash {
uniqHeaders = append(uniqHeaders, header)
}
return uniqHeaders
}
// Organize subTransactions by Transaction Hash
func subTransactionListToTransactionsByTxHash(subTransactions []Transfer) map[common.Hash]Transaction {
rst := map[common.Hash]Transaction{}
for index := range subTransactions {
subTx := &subTransactions[index]
txHash := subTx.Transaction.Hash()
if _, ok := rst[txHash]; !ok {
rst[txHash] = make([]*Transfer, 0)
}
rst[txHash] = append(rst[txHash], subTx)
}
return rst
}