status-go/waku/simulation_test.go

472 lines
13 KiB
Go
Raw Normal View History

2019-12-20 09:40:50 +00:00
// Copyright 2019 The Waku Library Authors.
//
// The Waku library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The Waku library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty off
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the Waku library. If not, see <http://www.gnu.org/licenses/>.
//
// This software uses the go-ethereum library, which is licensed
// under the GNU Lesser General Public Library, version 3 or any later.
package waku
import (
"bytes"
"crypto/ecdsa"
mrand "math/rand"
"net"
"sync"
"sync/atomic"
"testing"
"time"
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
gethcommon "github.com/ethereum/go-ethereum/common"
2019-12-20 09:40:50 +00:00
"github.com/ethereum/go-ethereum/common/hexutil"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/nat"
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
"github.com/status-im/status-go/waku/common"
2019-12-20 09:40:50 +00:00
)
var keys = []string{
"d49dcf37238dc8a7aac57dc61b9fee68f0a97f062968978b9fafa7d1033d03a9",
"73fd6143c48e80ed3c56ea159fe7494a0b6b393a392227b422f4c3e8f1b54f98",
"119dd32adb1daa7a4c7bf77f847fb28730785aa92947edf42fdd997b54de40dc",
"deeda8709dea935bb772248a3144dea449ffcc13e8e5a1fd4ef20ce4e9c87837",
"5bd208a079633befa349441bdfdc4d85ba9bd56081525008380a63ac38a407cf",
"1d27fb4912002d58a2a42a50c97edb05c1b3dffc665dbaa42df1fe8d3d95c9b5",
"15def52800c9d6b8ca6f3066b7767a76afc7b611786c1276165fbc61636afb68",
"51be6ab4b2dc89f251ff2ace10f3c1cc65d6855f3e083f91f6ff8efdfd28b48c",
"ef1ef7441bf3c6419b162f05da6037474664f198b58db7315a6f4de52414b4a0",
"09bdf6985aabc696dc1fbeb5381aebd7a6421727343872eb2fadfc6d82486fd9",
"15d811bf2e01f99a224cdc91d0cf76cea08e8c67905c16fee9725c9be71185c4",
"2f83e45cf1baaea779789f755b7da72d8857aeebff19362dd9af31d3c9d14620",
"73f04e34ac6532b19c2aae8f8e52f38df1ac8f5cd10369f92325b9b0494b0590",
"1e2e07b69e5025537fb73770f483dc8d64f84ae3403775ef61cd36e3faf162c1",
"8963d9bbb3911aac6d30388c786756b1c423c4fbbc95d1f96ddbddf39809e43a",
"0422da85abc48249270b45d8de38a4cc3c02032ede1fcf0864a51092d58a2f1f",
"8ae5c15b0e8c7cade201fdc149831aa9b11ff626a7ffd27188886cc108ad0fa8",
"acd8f5a71d4aecfcb9ad00d32aa4bcf2a602939b6a9dd071bab443154184f805",
"a285a922125a7481600782ad69debfbcdb0316c1e97c267aff29ef50001ec045",
"28fd4eee78c6cd4bf78f39f8ab30c32c67c24a6223baa40e6f9c9a0e1de7cef5",
"c5cca0c9e6f043b288c6f1aef448ab59132dab3e453671af5d0752961f013fc7",
"46df99b051838cb6f8d1b73f232af516886bd8c4d0ee07af9a0a033c391380fd",
"c6a06a53cbaadbb432884f36155c8f3244e244881b5ee3e92e974cfa166d793f",
"783b90c75c63dc72e2f8d11b6f1b4de54d63825330ec76ee8db34f06b38ea211",
"9450038f10ca2c097a8013e5121b36b422b95b04892232f930a29292d9935611",
"e215e6246ed1cfdcf7310d4d8cdbe370f0d6a8371e4eb1089e2ae05c0e1bc10f",
"487110939ed9d64ebbc1f300adeab358bc58875faf4ca64990fbd7fe03b78f2b",
"824a70ea76ac81366da1d4f4ac39de851c8ac49dca456bb3f0a186ceefa269a5",
"ba8f34fa40945560d1006a328fe70c42e35cc3d1017e72d26864cd0d1b150f15",
"30a5dfcfd144997f428901ea88a43c8d176b19c79dde54cc58eea001aa3d246c",
"de59f7183aca39aa245ce66a05245fecfc7e2c75884184b52b27734a4a58efa2",
"92629e2ff5f0cb4f5f08fffe0f64492024d36f045b901efb271674b801095c5a",
"7184c1701569e3a4c4d2ddce691edd983b81e42e09196d332e1ae2f1e062cff4",
}
type TestData struct {
started int64
counter [NumNodes]int
mutex sync.RWMutex
}
type TestNode struct {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
waku *Waku
2019-12-20 09:40:50 +00:00
id *ecdsa.PrivateKey
server *p2p.Server
filerID string
}
const NumNodes = 8 // must not exceed the number of keys (32)
var result TestData
var nodes [NumNodes]*TestNode
var sharedKey = hexutil.MustDecode("0x03ca634cae0d49acb401d8a4c6b6fe8c55b70d115bf400769cc1400f3258cd31")
var wrongKey = hexutil.MustDecode("0xf91156714d7ec88d3edc1c652c2181dbb3044e8771c683f3b30d33c12b986b11")
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
var sharedTopic = common.TopicType{0xF, 0x1, 0x2, 0}
var wrongTopic = common.TopicType{0, 0, 0, 0}
2019-12-20 09:40:50 +00:00
var expectedMessage = []byte("per aspera ad astra")
var unexpectedMessage = []byte("per rectum ad astra")
var masterBloomFilter []byte
var masterPow = 0.00000001
var round = 1
func TestSimulationBloomFilter(t *testing.T) {
2019-12-20 09:40:50 +00:00
// create a chain of waku nodes,
// installs the filters with shared (predefined) parameters
initializeBloomFilterMode(t)
2019-12-20 09:40:50 +00:00
// each node sends one random (not decryptable) message
for i := 0; i < NumNodes; i++ {
sendMsg(t, false, i)
}
// node #0 sends one expected (decryptable) message
sendMsg(t, true, 0)
// check if each node have received and decrypted exactly one message
checkPropagation(t, true)
// check if Status message was correctly decoded
checkBloomFilterExchange(t)
checkPowExchange(t)
// send new pow and bloom exchange messages
resetParams()
2019-12-20 09:40:50 +00:00
// node #1 sends one expected (decryptable) message
sendMsg(t, true, 1)
// check if each node (except node #0) have received and decrypted exactly one message
checkPropagation(t, false)
// check if corresponding protocol-level messages were correctly decoded
checkPowExchangeForNodeZero(t)
checkBloomFilterExchange(t)
stopServers()
}
func resetParams() {
2019-12-20 09:40:50 +00:00
// change pow only for node zero
masterPow = 7777777.0
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
_ = nodes[0].waku.SetMinimumPoW(masterPow, true)
2019-12-20 09:40:50 +00:00
// change bloom for all nodes
masterBloomFilter = sharedTopic.ToBloom()
2019-12-20 09:40:50 +00:00
for i := 0; i < NumNodes; i++ {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
_ = nodes[i].waku.SetBloomFilter(masterBloomFilter)
2019-12-20 09:40:50 +00:00
}
round++
}
func initBloom(t *testing.T) {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
masterBloomFilter = make([]byte, common.BloomFilterSize)
_, err := mrand.Read(masterBloomFilter) // nolint: gosec
2019-12-20 09:40:50 +00:00
if err != nil {
t.Fatalf("rand failed: %s.", err)
}
msgBloom := sharedTopic.ToBloom()
2019-12-20 09:40:50 +00:00
masterBloomFilter = addBloom(masterBloomFilter, msgBloom)
for i := 0; i < 32; i++ {
masterBloomFilter[i] = 0xFF
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if !common.BloomFilterMatch(masterBloomFilter, msgBloom) {
2019-12-20 09:40:50 +00:00
t.Fatalf("bloom mismatch on initBloom.")
}
}
func initializeBloomFilterMode(t *testing.T) {
2019-12-20 09:40:50 +00:00
initBloom(t)
var err error
for i := 0; i < NumNodes; i++ {
var node TestNode
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
b := make([]byte, common.BloomFilterSize)
2019-12-20 09:40:50 +00:00
copy(b, masterBloomFilter)
config := DefaultConfig
config.BloomFilterMode = true
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
node.waku = New(&config, nil)
_ = node.waku.SetMinimumPoW(masterPow, false)
_ = node.waku.SetBloomFilter(b)
if !bytes.Equal(node.waku.BloomFilter(), masterBloomFilter) {
2019-12-20 09:40:50 +00:00
t.Fatalf("bloom mismatch on init.")
}
_ = node.waku.Start()
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
topics := make([]common.TopicType, 0)
2019-12-20 09:40:50 +00:00
topics = append(topics, sharedTopic)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
f := common.Filter{KeySym: sharedKey, Messages: common.NewMemoryMessageStore()}
2019-12-20 09:40:50 +00:00
f.Topics = [][]byte{topics[0][:]}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
node.filerID, err = node.waku.Subscribe(&f)
2019-12-20 09:40:50 +00:00
if err != nil {
t.Fatalf("failed to install the filter: %s.", err)
}
node.id, err = crypto.HexToECDSA(keys[i])
if err != nil {
t.Fatalf("failed convert the key: %s.", keys[i])
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
name := gethcommon.MakeName("waku-go", "2.0")
2019-12-20 09:40:50 +00:00
node.server = &p2p.Server{
Config: p2p.Config{
PrivateKey: node.id,
MaxPeers: NumNodes/2 + 1,
Name: name,
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
Protocols: node.waku.Protocols(),
2019-12-20 09:40:50 +00:00
ListenAddr: "127.0.0.1:0",
NAT: nat.Any(),
},
}
2022-03-28 10:10:40 +00:00
go startServer(t, node.server) // nolint: staticcheck, govet
2019-12-20 09:40:50 +00:00
nodes[i] = &node
}
waitForServersToStart(t)
for i := 0; i < NumNodes; i++ {
for j := 0; j < i; j++ {
peerNodeID := nodes[j].id
2019-12-20 09:40:50 +00:00
address, _ := net.ResolveTCPAddr("tcp", nodes[j].server.ListenAddr)
peer := enode.NewV4(&peerNodeID.PublicKey, address.IP, address.Port, address.Port)
2019-12-20 09:40:50 +00:00
nodes[i].server.AddPeer(peer)
}
}
}
func startServer(t *testing.T, s *p2p.Server) {
err := s.Start()
if err != nil {
2022-03-28 10:10:40 +00:00
t.Fatalf("failed to start the first server. err: %v", err) // nolint: staticcheck
2019-12-20 09:40:50 +00:00
}
atomic.AddInt64(&result.started, 1)
}
func stopServers() {
for i := 0; i < NumNodes; i++ {
n := nodes[i]
if n != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
_ = n.waku.Unsubscribe(n.filerID)
_ = n.waku.Stop()
2019-12-20 09:40:50 +00:00
n.server.Stop()
}
}
}
func checkPropagation(t *testing.T, includingNodeZero bool) {
if t.Failed() {
return
}
// (cycle * iterations) should not exceed 50 seconds, since TTL=50
const cycle = 200 // time in milliseconds
const iterations = 250
first := 0
if !includingNodeZero {
first = 1
}
for j := 0; j < iterations; j++ {
for i := first; i < NumNodes; i++ {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
f := nodes[i].waku.GetFilter(nodes[i].filerID)
2019-12-20 09:40:50 +00:00
if f == nil {
t.Fatalf("failed to get filterId %s from node %d, round %d.", nodes[i].filerID, i, round)
}
mail := f.Retrieve()
validateMail(t, i, mail)
if isTestComplete() {
checkTestStatus()
return
}
}
checkTestStatus()
time.Sleep(cycle * time.Millisecond)
}
if !includingNodeZero {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
f := nodes[0].waku.GetFilter(nodes[0].filerID)
2019-12-20 09:40:50 +00:00
if f != nil {
t.Fatalf("node zero received a message with low PoW.")
}
}
t.Fatalf("Test was not complete (%d round): timeout %d seconds. nodes=%v", round, iterations*cycle/1000, nodes)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
func validateMail(t *testing.T, index int, mail []*common.ReceivedMessage) {
2019-12-20 09:40:50 +00:00
var cnt int
for _, m := range mail {
if bytes.Equal(m.Payload, expectedMessage) {
cnt++
}
}
if cnt == 0 {
// no messages received yet: nothing is wrong
return
}
if cnt > 1 {
t.Fatalf("node %d received %d.", index, cnt)
}
if cnt == 1 {
result.mutex.Lock()
defer result.mutex.Unlock()
result.counter[index] += cnt
if result.counter[index] > 1 {
t.Fatalf("node %d accumulated %d.", index, result.counter[index])
}
}
}
func checkTestStatus() {
var cnt int
var arr [NumNodes]int
for i := 0; i < NumNodes; i++ {
arr[i] = nodes[i].server.PeerCount()
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
envelopes := nodes[i].waku.Envelopes()
2019-12-20 09:40:50 +00:00
if len(envelopes) >= NumNodes {
cnt++
}
}
}
func isTestComplete() bool {
result.mutex.RLock()
defer result.mutex.RUnlock()
for i := 0; i < NumNodes; i++ {
if result.counter[i] < 1 {
return false
}
}
for i := 0; i < NumNodes; i++ {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
envelopes := nodes[i].waku.Envelopes()
2019-12-20 09:40:50 +00:00
if len(envelopes) < NumNodes+1 {
return false
}
}
return true
}
func sendMsg(t *testing.T, expected bool, id int) {
if t.Failed() {
return
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
opt := common.MessageParams{KeySym: sharedKey, Topic: sharedTopic, Payload: expectedMessage, PoW: 0.00000001, WorkTime: 1}
2019-12-20 09:40:50 +00:00
if !expected {
opt.KeySym = wrongKey
opt.Topic = wrongTopic
opt.Payload = unexpectedMessage
opt.Payload[0] = byte(id)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
msg, err := common.NewSentMessage(&opt)
2019-12-20 09:40:50 +00:00
if err != nil {
t.Fatalf("failed to create new message: %s.", err)
2019-12-20 09:40:50 +00:00
}
envelope, err := msg.Wrap(&opt, time.Now())
if err != nil {
t.Fatalf("failed to seal message: %s", err)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
err = nodes[id].waku.Send(envelope)
2019-12-20 09:40:50 +00:00
if err != nil {
t.Fatalf("failed to send message: %s", err)
}
}
func checkPowExchangeForNodeZero(t *testing.T) {
const iterations = 200
for j := 0; j < iterations; j++ {
lastCycle := j == iterations-1
2019-12-20 09:40:50 +00:00
ok := checkPowExchangeForNodeZeroOnce(t, lastCycle)
if ok {
break
}
time.Sleep(50 * time.Millisecond)
}
}
func checkPowExchangeForNodeZeroOnce(t *testing.T, mustPass bool) bool {
cnt := 0
for i, node := range nodes {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
for protocol := range node.waku.peers {
if protocol.EnodeID() == nodes[0].server.Self().ID() {
2019-12-20 09:40:50 +00:00
cnt++
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if protocol.PoWRequirement() != masterPow {
2019-12-20 09:40:50 +00:00
if mustPass {
t.Fatalf("node %d: failed to set the new pow requirement for node zero.", i)
} else {
return false
}
}
}
}
}
if cnt == 0 {
t.Fatalf("looking for node zero: no matching peers found.")
}
return true
}
func checkPowExchange(t *testing.T) {
for i, node := range nodes {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
for protocol := range node.waku.peers {
if protocol.EnodeID() != nodes[0].server.Self().ID() {
if protocol.PoWRequirement() != masterPow {
2019-12-20 09:40:50 +00:00
t.Fatalf("node %d: failed to exchange pow requirement in round %d; expected %f, got %f",
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
i, round, masterPow, protocol.PoWRequirement())
2019-12-20 09:40:50 +00:00
}
}
}
}
}
func checkBloomFilterExchangeOnce(t *testing.T, mustPass bool) bool {
for i, node := range nodes {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
for protocol := range node.waku.peers {
equals := bytes.Equal(protocol.BloomFilter(), masterBloomFilter)
2019-12-20 09:40:50 +00:00
if !equals {
if mustPass {
t.Fatalf("node %d: failed to exchange bloom filter requirement in round %d. \n%x expected \n%x got",
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
i, round, masterBloomFilter, protocol.BloomFilter())
2019-12-20 09:40:50 +00:00
} else {
return false
}
}
}
}
return true
}
func checkBloomFilterExchange(t *testing.T) {
const iterations = 200
for j := 0; j < iterations; j++ {
lastCycle := j == iterations-1
2019-12-20 09:40:50 +00:00
ok := checkBloomFilterExchangeOnce(t, lastCycle)
if ok {
break
}
time.Sleep(50 * time.Millisecond)
}
}
func waitForServersToStart(t *testing.T) {
const iterations = 200
var started int64
for j := 0; j < iterations; j++ {
time.Sleep(50 * time.Millisecond)
started = atomic.LoadInt64(&result.started)
if started == NumNodes {
return
}
}
t.Fatalf("Failed to start all the servers, running: %d", started)
}