2020-04-23 19:54:24 +00:00
|
|
|
// Copyright 2019 The Waku Library Authors.
|
|
|
|
//
|
|
|
|
// The Waku library is free software: you can redistribute it and/or modify
|
|
|
|
// it under the terms of the GNU Lesser General Public License as published by
|
|
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
|
|
// (at your option) any later version.
|
|
|
|
//
|
|
|
|
// The Waku library is distributed in the hope that it will be useful,
|
|
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty off
|
|
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
// GNU Lesser General Public License for more details.
|
|
|
|
//
|
|
|
|
// You should have received a copy of the GNU Lesser General Public License
|
|
|
|
// along with the Waku library. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
//
|
|
|
|
// This software uses the go-ethereum library, which is licensed
|
|
|
|
// under the GNU Lesser General Public Library, version 3 or any later.
|
|
|
|
|
Move networking code for waku under `v0` namespace
Why make the change?
As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.
This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .
All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.
In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.
This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.
What has changed?
- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`
Things still to do
Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.
Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
|
|
|
package common
|
2020-04-23 19:54:24 +00:00
|
|
|
|
|
|
|
import (
|
|
|
|
"time"
|
|
|
|
|
|
|
|
"github.com/ethereum/go-ethereum/crypto"
|
|
|
|
)
|
|
|
|
|
|
|
|
// Waku protocol parameters
|
|
|
|
const (
|
|
|
|
SizeMask = byte(3) // mask used to extract the size of payload size field from the flags
|
|
|
|
signatureFlag = byte(4)
|
|
|
|
|
|
|
|
TopicLength = 4 // in bytes
|
|
|
|
signatureLength = crypto.SignatureLength // in bytes
|
Move networking code for waku under `v0` namespace
Why make the change?
As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.
This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .
All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.
In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.
This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.
What has changed?
- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`
Things still to do
Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.
Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
|
|
|
AESKeyLength = 32 // in bytes
|
2020-04-23 19:54:24 +00:00
|
|
|
aesNonceLength = 12 // in bytes; for more info please see cipher.gcmStandardNonceSize & aesgcm.NonceSize()
|
Move networking code for waku under `v0` namespace
Why make the change?
As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.
This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .
All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.
In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.
This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.
What has changed?
- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`
Things still to do
Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.
Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
|
|
|
KeyIDSize = 32 // in bytes
|
2020-04-23 19:54:24 +00:00
|
|
|
BloomFilterSize = 64 // in bytes
|
|
|
|
MaxTopicInterest = 10000
|
|
|
|
flagsLength = 1
|
|
|
|
|
|
|
|
EnvelopeHeaderLength = 20
|
|
|
|
|
|
|
|
MaxMessageSize = uint32(10 * 1024 * 1024) // maximum accepted size of a message.
|
|
|
|
DefaultMaxMessageSize = uint32(1024 * 1024)
|
|
|
|
DefaultMinimumPoW = 0.2
|
|
|
|
|
Move networking code for waku under `v0` namespace
Why make the change?
As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.
This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .
All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.
In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.
This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.
What has changed?
- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`
Things still to do
Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.
Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
|
|
|
padSizeLimit = 256 // just an arbitrary number, could be changed without breaking the protocol
|
2020-04-23 19:54:24 +00:00
|
|
|
|
Move networking code for waku under `v0` namespace
Why make the change?
As discussed previously, the way we will move across versions is to maintain completely separate
codebases and eventually remove those that are not supported anymore.
This has the drawback of some code duplication, but the advantage is that is more
explicit what each version requires, and changes in one version will not
impact the other, so we won't pile up backward compatible code.
This is the same strategy used by `whisper` in go ethereum and is influenced by
https://www.youtube.com/watch?v=oyLBGkS5ICk .
All the code that is used for the networking protocol is now under `v0/`.
Some of the common parts might still be refactored out.
The main namespace `waku` deals with `host`->`waku` interactions (through RPC),
while `v0` deals with `waku`->`remote-waku` interactions.
In order to support `v1`, the namespace `v0` will be copied over, and changed to
support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed.
This PR does not actually implement `v1`, I'd rather get things looked over to
make sure the structure is what we would like before implementing the changes.
What has changed?
- Moved all code for the common parts under `waku/common/` namespace
- Moved code used for bloomfilters in `waku/common/bloomfilter.go`
- Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc)
- Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go`
Things still to do
Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`).
I started moving those tests to instead of stubbing using the actual component, which increases
the testing surface. Some other tests that can't be easily ported should be likely moved under
`v0` instead. Ideally no version specif code should be exported from a version namespace (for
example the various codes, as those might change across versions). But this will be a work-in-progress.
Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only
when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
|
|
|
ExpirationCycle = time.Second
|
|
|
|
TransmissionCycle = 300 * time.Millisecond
|
2020-04-23 19:54:24 +00:00
|
|
|
|
|
|
|
DefaultTTL = 50 // seconds
|
|
|
|
DefaultSyncAllowance = 10 // seconds
|
|
|
|
|
|
|
|
MaxLimitInSyncMailRequest = 1000
|
|
|
|
|
|
|
|
EnvelopeTimeNotSynced uint = iota + 1
|
|
|
|
EnvelopeOtherError
|
|
|
|
|
|
|
|
MaxLimitInMessagesRequest = 1000
|
|
|
|
)
|