status-go/waku/common/rate_limiter_test.go

236 lines
5.6 KiB
Go
Raw Normal View History

2019-12-20 09:40:50 +00:00
// Copyright 2019 The Waku Library Authors.
//
// The Waku library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The Waku library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty off
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the Waku library. If not, see <http://www.gnu.org/licenses/>.
//
// This software uses the go-ethereum library, which is licensed
// under the GNU Lesser General Public Library, version 3 or any later.
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
package common
2019-12-20 09:40:50 +00:00
import (
"bytes"
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
"net"
2019-12-20 09:40:50 +00:00
"testing"
"time"
2020-01-02 09:10:19 +00:00
"github.com/stretchr/testify/require"
2019-12-20 09:40:50 +00:00
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
)
func TestPeerRateLimiterDecorator(t *testing.T) {
in, out := p2p.MsgPipe()
payload := []byte{0x01, 0x02, 0x03}
msg := p2p.Msg{
Code: 1,
Size: uint32(len(payload)),
Payload: bytes.NewReader(payload),
ReceivedAt: time.Now(),
}
go func() {
err := in.WriteMsg(msg)
require.NoError(t, err)
}()
messages := make(chan p2p.Msg, 1)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
runLoop := func(rw p2p.MsgReadWriter) error {
2019-12-20 09:40:50 +00:00
msg, err := rw.ReadMsg()
if err != nil {
return err
}
messages <- msg
return nil
}
r := NewPeerRateLimiter(nil, &mockRateLimiterHandler{})
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
err := r.Decorate(nil, out, runLoop)
2019-12-20 09:40:50 +00:00
require.NoError(t, err)
receivedMsg := <-messages
receivedPayload := make([]byte, receivedMsg.Size)
_, err = receivedMsg.Payload.Read(receivedPayload)
require.NoError(t, err)
require.Equal(t, msg.Code, receivedMsg.Code)
require.Equal(t, payload, receivedPayload)
}
func TestPeerLimiterThrottlingWithZeroLimit(t *testing.T) {
r := NewPeerRateLimiter(&PeerRateLimiterConfig{}, &mockRateLimiterHandler{})
for i := 0; i < 1000; i++ {
throttle := r.throttleIP("<nil>", 0)
2019-12-20 09:40:50 +00:00
require.False(t, throttle)
throttle = r.throttlePeer([]byte{0x01, 0x02, 0x03}, 0)
2019-12-20 09:40:50 +00:00
require.False(t, throttle)
}
}
func TestPeerPacketLimiterHandler(t *testing.T) {
2019-12-20 09:40:50 +00:00
h := &mockRateLimiterHandler{}
r := NewPeerRateLimiter(nil, h)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
p := &TestWakuPeer{
2019-12-20 09:40:50 +00:00
peer: p2p.NewPeer(enode.ID{0xaa, 0xbb, 0xcc}, "test-peer", nil),
}
rw1, rw2 := p2p.MsgPipe()
count := 100
go func() {
err := echoMessages(r, p, rw2)
require.NoError(t, err)
}()
done := make(chan struct{})
go func() {
for i := 0; i < count; i++ {
msg, err := rw1.ReadMsg()
require.NoError(t, err)
require.EqualValues(t, 101, msg.Code)
}
close(done)
}()
for i := 0; i < count; i++ {
2019-12-20 09:40:50 +00:00
err := rw1.WriteMsg(p2p.Msg{Code: 101})
require.NoError(t, err)
}
<-done
require.EqualValues(t, 100-defaultPeerRateLimiterConfig.PacketLimitPerSecIP, h.exceedIPLimit)
require.EqualValues(t, 100-defaultPeerRateLimiterConfig.PacketLimitPerSecPeerID, h.exceedPeerLimit)
2019-12-20 09:40:50 +00:00
}
func TestPeerBytesLimiterHandler(t *testing.T) {
2019-12-20 09:40:50 +00:00
h := &mockRateLimiterHandler{}
r := NewPeerRateLimiter(&PeerRateLimiterConfig{
BytesLimitPerSecIP: 30,
BytesLimitPerSecPeerID: 30,
}, h)
p := &TestWakuPeer{
peer: p2p.NewPeer(enode.ID{0xaa, 0xbb, 0xcc}, "test-peer", nil),
}
rw1, rw2 := p2p.MsgPipe()
count := 6
go func() {
err := echoMessages(r, p, rw2)
require.NoError(t, err)
}()
done := make(chan struct{})
go func() {
for i := 0; i < count; i++ {
msg, err := rw1.ReadMsg()
require.NoError(t, err)
require.EqualValues(t, 101, msg.Code)
require.NoError(t, msg.Discard())
}
close(done)
}()
for i := 0; i < count; i++ {
payload := make([]byte, 10)
msg := p2p.Msg{
Code: 101,
Size: uint32(len(payload)),
Payload: bytes.NewReader(payload),
}
err := rw1.WriteMsg(msg)
require.NoError(t, err)
}
<-done
require.EqualValues(t, 3, h.exceedIPLimit)
require.EqualValues(t, 3, h.exceedPeerLimit)
}
func TestPeerPacketLimiterHandlerWithWhitelisting(t *testing.T) {
h := &mockRateLimiterHandler{}
r := NewPeerRateLimiter(&PeerRateLimiterConfig{
PacketLimitPerSecIP: 1,
PacketLimitPerSecPeerID: 1,
WhitelistedIPs: []string{"<nil>"}, // no IP is represented as <nil> string
WhitelistedPeerIDs: []enode.ID{{0xaa, 0xbb, 0xcc}},
2019-12-20 09:40:50 +00:00
}, h)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
p := &TestWakuPeer{
2019-12-20 09:40:50 +00:00
peer: p2p.NewPeer(enode.ID{0xaa, 0xbb, 0xcc}, "test-peer", nil),
}
rw1, rw2 := p2p.MsgPipe()
count := 100
go func() {
err := echoMessages(r, p, rw2)
require.NoError(t, err)
}()
done := make(chan struct{})
go func() {
for i := 0; i < count; i++ {
msg, err := rw1.ReadMsg()
require.NoError(t, err)
require.EqualValues(t, 101, msg.Code)
}
close(done)
}()
for i := 0; i < count; i++ {
2019-12-20 09:40:50 +00:00
err := rw1.WriteMsg(p2p.Msg{Code: 101})
require.NoError(t, err)
}
<-done
require.Equal(t, 0, h.exceedIPLimit)
require.Equal(t, 0, h.exceedPeerLimit)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
func echoMessages(r *PeerRateLimiter, p RateLimiterPeer, rw p2p.MsgReadWriter) error {
return r.Decorate(p, rw, func(rw p2p.MsgReadWriter) error {
2019-12-20 09:40:50 +00:00
for {
msg, err := rw.ReadMsg()
if err != nil {
return err
}
err = rw.WriteMsg(msg)
if err != nil {
return err
}
}
})
}
type mockRateLimiterHandler struct {
exceedPeerLimit int
exceedIPLimit int
}
func (m *mockRateLimiterHandler) ExceedPeerLimit() error { m.exceedPeerLimit++; return nil }
func (m *mockRateLimiterHandler) ExceedIPLimit() error { m.exceedIPLimit++; return nil }
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
type TestWakuPeer struct {
peer *p2p.Peer
}
func (p *TestWakuPeer) IP() net.IP {
return p.peer.Node().IP()
}
func (p *TestWakuPeer) ID() []byte {
id := p.peer.ID()
return id[:]
}