status-go/waku/common/message_test.go

502 lines
13 KiB
Go
Raw Normal View History

2019-12-20 09:40:50 +00:00
// Copyright 2019 The Waku Library Authors.
//
// The Waku library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The Waku library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty off
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the Waku library. If not, see <http://www.gnu.org/licenses/>.
//
// This software uses the go-ethereum library, which is licensed
// under the GNU Lesser General Public Library, version 3 or any later.
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
package common
2019-12-20 09:40:50 +00:00
import (
"bytes"
"crypto/aes"
"crypto/cipher"
mrand "math/rand"
"testing"
"time"
"github.com/stretchr/testify/require"
2019-12-20 09:40:50 +00:00
"github.com/ethereum/go-ethereum/common/hexutil"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/rlp"
)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
func GenerateMessageParams() (*MessageParams, error) {
2019-12-20 09:40:50 +00:00
// set all the parameters except p.Dst and p.Padding
buf := make([]byte, 4)
2020-12-28 09:09:45 +00:00
mrand.Read(buf) // nolint: gosec
sz := mrand.Intn(400) // nolint: gosec
2019-12-20 09:40:50 +00:00
var p MessageParams
p.PoW = 0.01
p.WorkTime = 1
2020-12-28 09:09:45 +00:00
p.TTL = uint32(mrand.Intn(1024)) // nolint: gosec
2019-12-20 09:40:50 +00:00
p.Payload = make([]byte, sz)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
p.KeySym = make([]byte, AESKeyLength)
mrand.Read(p.Payload) // nolint: gosec
mrand.Read(p.KeySym) // nolint: gosec
2019-12-20 09:40:50 +00:00
p.Topic = BytesToTopic(buf)
var err error
p.Src, err = crypto.GenerateKey()
if err != nil {
return nil, err
}
return &p, nil
}
func singleMessageTest(t *testing.T, symmetric bool) {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err := GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
key, err := crypto.GenerateKey()
if err != nil {
t.Fatalf("failed GenerateKey with seed %d: %s.", seed, err)
}
if !symmetric {
params.KeySym = nil
params.Dst = &key.PublicKey
}
text := make([]byte, 0, 512)
text = append(text, params.Payload...)
msg, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
env, err := msg.Wrap(params, time.Now())
if err != nil {
t.Fatalf("failed Wrap with seed %d: %s.", seed, err)
}
var decrypted *ReceivedMessage
if symmetric {
decrypted, err = env.OpenSymmetric(params.KeySym)
} else {
decrypted, err = env.OpenAsymmetric(key)
}
if err != nil {
t.Fatalf("failed to encrypt with seed %d: %s.", seed, err)
}
if !decrypted.ValidateAndParse() {
t.Fatalf("failed to validate with seed %d, symmetric = %v.", seed, symmetric)
}
if !bytes.Equal(text, decrypted.Payload) {
t.Fatalf("failed with seed %d: compare payload.", seed)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if !IsMessageSigned(decrypted.Raw[0]) {
2019-12-20 09:40:50 +00:00
t.Fatalf("failed with seed %d: unsigned.", seed)
}
if len(decrypted.Signature) != signatureLength {
t.Fatalf("failed with seed %d: signature len %d.", seed, len(decrypted.Signature))
}
if !IsPubKeyEqual(decrypted.Src, &params.Src.PublicKey) {
t.Fatalf("failed with seed %d: signature mismatch.", seed)
}
}
func TestMessageEncryption(t *testing.T) {
InitSingleTest()
var symmetric bool
for i := 0; i < 256; i++ {
singleMessageTest(t, symmetric)
symmetric = !symmetric
}
}
func TestMessageWrap(t *testing.T) {
seed = int64(1777444222)
mrand.Seed(seed)
target := 128.0
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err := GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
msg, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
params.TTL = 1
params.WorkTime = 12
params.PoW = target
env, err := msg.Wrap(params, time.Now())
if err != nil {
t.Fatalf("failed Wrap with seed %d: %s.", seed, err)
}
pow := env.PoW()
if pow < target {
t.Fatalf("failed Wrap with seed %d: pow < target (%f vs. %f).", seed, pow, target)
}
// set PoW target too high, expect error
msg2, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
params.TTL = 1000000
params.WorkTime = 1
params.PoW = 10000000.0
_, err = msg2.Wrap(params, time.Now())
if err == nil {
t.Fatalf("unexpectedly reached the PoW target with seed %d.", seed)
}
}
func TestMessageSeal(t *testing.T) {
// this test depends on deterministic choice of seed (1976726903)
seed = int64(1976726903)
mrand.Seed(seed)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err := GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
msg, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
params.TTL = 1
env := NewEnvelope(params.TTL, params.Topic, msg, time.Now())
env.Expiry = uint32(seed) // make it deterministic
target := 32.0
params.WorkTime = 4
params.PoW = target
err = env.Seal(params)
if err != nil {
t.Logf("failed to seal envelope: %s", err)
}
2019-12-20 09:40:50 +00:00
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
env.CalculatePoW(0)
2019-12-20 09:40:50 +00:00
pow := env.PoW()
if pow < target {
t.Fatalf("failed Wrap with seed %d: pow < target (%f vs. %f).", seed, pow, target)
}
// Seal should fail as WorkTime is significantly lower than PoW would require
2019-12-20 09:40:50 +00:00
params.WorkTime = 1
params.PoW = 1000000000.0
err = env.Seal(params)
require.EqualError(t, err, "failed to reach the PoW target, specified pow time (1 seconds) was insufficient")
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
env.CalculatePoW(0)
2019-12-20 09:40:50 +00:00
pow = env.PoW()
if pow < 2*target {
t.Fatalf("failed Wrap with seed %d: pow too small %f.", seed, pow)
}
}
func TestEnvelopeOpen(t *testing.T) {
InitSingleTest()
var symmetric bool
for i := 0; i < 32; i++ {
singleEnvelopeOpenTest(t, symmetric)
symmetric = !symmetric
}
}
func singleEnvelopeOpenTest(t *testing.T, symmetric bool) {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err := GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
key, err := crypto.GenerateKey()
if err != nil {
t.Fatalf("failed GenerateKey with seed %d: %s.", seed, err)
}
if !symmetric {
params.KeySym = nil
params.Dst = &key.PublicKey
}
text := make([]byte, 0, 512)
text = append(text, params.Payload...)
msg, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
env, err := msg.Wrap(params, time.Now())
if err != nil {
t.Fatalf("failed Wrap with seed %d: %s.", seed, err)
}
var f Filter
if symmetric {
f = Filter{KeySym: params.KeySym}
} else {
f = Filter{KeyAsym: key}
}
decrypted := env.Open(&f)
if decrypted == nil {
t.Fatalf("failed to open with seed %d.", seed)
}
if !bytes.Equal(text, decrypted.Payload) {
t.Fatalf("failed with seed %d: compare payload.", seed)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if !IsMessageSigned(decrypted.Raw[0]) {
2019-12-20 09:40:50 +00:00
t.Fatalf("failed with seed %d: unsigned.", seed)
}
if len(decrypted.Signature) != signatureLength {
t.Fatalf("failed with seed %d: signature len %d.", seed, len(decrypted.Signature))
}
if !IsPubKeyEqual(decrypted.Src, &params.Src.PublicKey) {
t.Fatalf("failed with seed %d: signature mismatch.", seed)
}
if decrypted.isAsymmetricEncryption() == symmetric {
t.Fatalf("failed with seed %d: asymmetric %v vs. %v.", seed, decrypted.isAsymmetricEncryption(), symmetric)
}
if decrypted.isSymmetricEncryption() != symmetric {
t.Fatalf("failed with seed %d: symmetric %v vs. %v.", seed, decrypted.isSymmetricEncryption(), symmetric)
}
if !symmetric {
if decrypted.Dst == nil {
t.Fatalf("failed with seed %d: dst is nil.", seed)
}
if !IsPubKeyEqual(decrypted.Dst, &key.PublicKey) {
t.Fatalf("failed with seed %d: Dst.", seed)
}
}
}
func TestEncryptWithZeroKey(t *testing.T) {
InitSingleTest()
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err := GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
msg, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params.KeySym = make([]byte, AESKeyLength)
2019-12-20 09:40:50 +00:00
_, err = msg.Wrap(params, time.Now())
if err == nil {
t.Fatalf("wrapped with zero key, seed: %d.", seed)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err = GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
msg, err = NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
params.KeySym = make([]byte, 0)
_, err = msg.Wrap(params, time.Now())
if err == nil {
t.Fatalf("wrapped with empty key, seed: %d.", seed)
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err = GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
msg, err = NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
params.KeySym = nil
_, err = msg.Wrap(params, time.Now())
if err == nil {
t.Fatalf("wrapped with nil key, seed: %d.", seed)
}
}
func TestRlpEncode(t *testing.T) {
InitSingleTest()
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err := GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d: %s.", seed, err)
2019-12-20 09:40:50 +00:00
}
msg, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
env, err := msg.Wrap(params, time.Now())
if err != nil {
t.Fatalf("wrapped with zero key, seed: %d.", seed)
}
raw, err := rlp.EncodeToBytes(env)
if err != nil {
t.Fatalf("RLP encode failed: %s.", err)
}
var decoded Envelope
err = rlp.DecodeBytes(raw, &decoded)
2019-12-20 09:40:50 +00:00
if err != nil {
t.Fatalf("RLP decode failed: %s.", err)
}
he := env.Hash()
hd := decoded.Hash()
if he != hd {
t.Fatalf("Hashes are not equal: %x vs. %x", he, hd)
}
}
func singlePaddingTest(t *testing.T, padSize int) {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
params, err := GenerateMessageParams()
2019-12-20 09:40:50 +00:00
if err != nil {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
t.Fatalf("failed GenerateMessageParams with seed %d and sz=%d: %s.", seed, padSize, err)
2019-12-20 09:40:50 +00:00
}
params.Padding = make([]byte, padSize)
params.PoW = 0.0000000001
pad := make([]byte, padSize)
_, err = mrand.Read(pad) // nolint: gosec
2019-12-20 09:40:50 +00:00
if err != nil {
t.Fatalf("padding is not generated (seed %d): %s", seed, err)
}
n := copy(params.Padding, pad)
if n != padSize {
t.Fatalf("padding is not copied (seed %d): %s", seed, err)
}
msg, err := NewSentMessage(params)
if err != nil {
t.Fatalf("failed to create new message with seed %d: %s.", seed, err)
}
env, err := msg.Wrap(params, time.Now())
if err != nil {
t.Fatalf("failed to wrap, seed: %d and sz=%d.", seed, padSize)
}
f := Filter{KeySym: params.KeySym}
decrypted := env.Open(&f)
if decrypted == nil {
t.Fatalf("failed to open, seed and sz=%d: %d.", seed, padSize)
}
if !bytes.Equal(pad, decrypted.Padding) {
t.Fatalf("padding is not retireved as expected with seed %d and sz=%d:\n[%x]\n[%x].", seed, padSize, pad, decrypted.Padding)
}
}
func TestPadding(t *testing.T) {
InitSingleTest()
for i := 1; i < 260; i++ {
singlePaddingTest(t, i)
}
lim := 256 * 256
for i := lim - 5; i < lim+2; i++ {
singlePaddingTest(t, i)
}
for i := 0; i < 256; i++ {
2020-12-28 09:09:45 +00:00
n := mrand.Intn(256*254) + 256 // nolint: gosec
2019-12-20 09:40:50 +00:00
singlePaddingTest(t, n)
}
for i := 0; i < 256; i++ {
2020-12-28 09:09:45 +00:00
n := mrand.Intn(256*1024) + 256*256 // nolint: gosec
2019-12-20 09:40:50 +00:00
singlePaddingTest(t, n)
}
}
func TestPaddingAppendedToSymMessagesWithSignature(t *testing.T) {
params := &MessageParams{
Payload: make([]byte, 246),
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
KeySym: make([]byte, AESKeyLength),
2019-12-20 09:40:50 +00:00
}
pSrc, err := crypto.GenerateKey()
if err != nil {
t.Fatalf("Error creating the signature key %v", err)
return
}
params.Src = pSrc
// Simulate a message with a payload just under 256 so that
// payload + flag + signature > 256. Check that the result
// is padded on the next 256 boundary.
2022-03-28 10:10:40 +00:00
msg := SentMessage{}
2019-12-20 09:40:50 +00:00
const payloadSizeFieldMinSize = 1
msg.Raw = make([]byte, flagsLength+payloadSizeFieldMinSize+len(params.Payload))
err = msg.appendPadding(params)
if err != nil {
t.Fatalf("Error appending padding to message %v", err)
return
}
if len(msg.Raw) != 512-signatureLength {
t.Errorf("Invalid size %d != 512", len(msg.Raw))
}
}
func TestAesNonce(t *testing.T) {
key := hexutil.MustDecode("0x03ca634cae0d49acb401d8a4c6b6fe8c55b70d115bf400769cc1400f3258cd31")
block, err := aes.NewCipher(key)
if err != nil {
t.Fatalf("NewCipher failed: %s", err)
}
aesgcm, err := cipher.NewGCM(block)
if err != nil {
t.Fatalf("NewGCM failed: %s", err)
}
// This is the most important single test in this package.
// If it fails, waku will not be working.
if aesgcm.NonceSize() != aesNonceLength {
t.Fatalf("Nonce size is wrong. This is a critical error. Apparently AES nonce size have changed in the new version of AES GCM package. Waku will not be working until this problem is resolved.")
}
}
func TestValidateAndParseSizeOfPayloadSize(t *testing.T) {
testCases := []struct {
Name string
Raw []byte
}{
{
Name: "one byte of value 1",
Raw: []byte{1},
},
{
Name: "two bytes of values 1 and 1",
Raw: []byte{1, 1},
},
}
for _, tc := range testCases {
t.Run(tc.Name, func(t *testing.T) {
msg := ReceivedMessage{Raw: tc.Raw}
msg.ValidateAndParse()
})
}
}