feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
package protocol
|
|
|
|
|
|
|
|
import (
|
|
|
|
"context"
|
|
|
|
"errors"
|
|
|
|
"time"
|
|
|
|
|
|
|
|
"github.com/golang/protobuf/proto"
|
|
|
|
"go.uber.org/zap"
|
|
|
|
|
|
|
|
"github.com/status-im/status-go/eth-node/crypto"
|
2024-09-19 08:17:46 +00:00
|
|
|
"github.com/status-im/status-go/eth-node/types"
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
"github.com/status-im/status-go/images"
|
|
|
|
"github.com/status-im/status-go/protocol/common"
|
|
|
|
"github.com/status-im/status-go/protocol/encryption/multidevice"
|
|
|
|
"github.com/status-im/status-go/protocol/protobuf"
|
|
|
|
"github.com/status-im/status-go/protocol/requests"
|
|
|
|
)
|
|
|
|
|
2024-10-07 14:05:37 +00:00
|
|
|
type InstallationIDProvider interface {
|
|
|
|
GetInstallationID() string
|
|
|
|
Validate() error
|
|
|
|
}
|
|
|
|
|
2024-09-19 08:17:46 +00:00
|
|
|
func (m *Messenger) EnableInstallationAndSync(request *requests.EnableInstallationAndSync) (*MessengerResponse, error) {
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
if err := request.Validate(); err != nil {
|
2024-09-19 08:17:46 +00:00
|
|
|
return nil, err
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
}
|
2024-10-07 14:05:37 +00:00
|
|
|
|
|
|
|
installation, err := m.EnableInstallation(request.InstallationID)
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
if err != nil {
|
2024-09-19 08:17:46 +00:00
|
|
|
return nil, err
|
|
|
|
}
|
2024-10-07 14:05:37 +00:00
|
|
|
|
|
|
|
response := &MessengerResponse{}
|
|
|
|
response.AddInstallation(installation)
|
|
|
|
|
|
|
|
pairResponse, err := m.SendPairInstallation(context.Background(), request.InstallationID, nil)
|
2024-09-19 08:17:46 +00:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2024-10-07 14:05:37 +00:00
|
|
|
|
|
|
|
if err = m.SyncDevices(context.Background(), "", "", nil); err != nil {
|
2024-09-19 08:17:46 +00:00
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
2024-10-07 14:05:37 +00:00
|
|
|
if err = m.deleteNotification(pairResponse, request.InstallationID); err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
if err = pairResponse.Merge(response); err != nil {
|
2024-09-19 08:17:46 +00:00
|
|
|
return nil, err
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
}
|
2024-09-19 08:17:46 +00:00
|
|
|
|
2024-10-07 14:05:37 +00:00
|
|
|
return pairResponse, nil
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
}
|
|
|
|
|
2024-10-07 14:05:37 +00:00
|
|
|
func (m *Messenger) EnableInstallationAndPair(request InstallationIDProvider) (*MessengerResponse, error) {
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
if err := request.Validate(); err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
myIdentity := crypto.CompressPubkey(&m.identity.PublicKey)
|
|
|
|
timestamp := time.Now().UnixNano()
|
2024-10-07 14:05:37 +00:00
|
|
|
installationID := request.GetInstallationID()
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
|
|
|
|
installation := &multidevice.Installation{
|
2024-10-07 14:05:37 +00:00
|
|
|
ID: installationID,
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
Enabled: true,
|
|
|
|
Version: 2,
|
|
|
|
Timestamp: timestamp,
|
|
|
|
}
|
|
|
|
|
|
|
|
_, err := m.encryptor.AddInstallation(myIdentity, timestamp, installation, true)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2024-10-07 14:05:37 +00:00
|
|
|
i, ok := m.allInstallations.Load(installationID)
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
if !ok {
|
|
|
|
i = installation
|
|
|
|
} else {
|
|
|
|
i.Enabled = true
|
|
|
|
}
|
2024-10-07 14:05:37 +00:00
|
|
|
m.allInstallations.Store(installationID, i)
|
|
|
|
response, err := m.SendPairInstallation(context.Background(), request.GetInstallationID(), nil)
|
2024-09-19 08:17:46 +00:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
notification := &ActivityCenterNotification{
|
2024-10-07 14:05:37 +00:00
|
|
|
ID: types.FromHex(installationID),
|
2024-09-19 08:17:46 +00:00
|
|
|
Type: ActivityCenterNotificationTypeNewInstallationCreated,
|
|
|
|
InstallationID: m.installationID, // Put our own installation ID, as we're the initiator of the pairing
|
|
|
|
Timestamp: m.getTimesource().GetCurrentTime(),
|
|
|
|
Read: false,
|
|
|
|
Deleted: false,
|
|
|
|
UpdatedAt: m.GetCurrentTimeInMillis(),
|
|
|
|
}
|
|
|
|
|
|
|
|
err = m.addActivityCenterNotification(response, notification, nil)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
return response, err
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// SendPairInstallation sends a pair installation message
|
2024-10-07 14:05:37 +00:00
|
|
|
func (m *Messenger) SendPairInstallation(ctx context.Context, targetInstallationID string, rawMessageHandler RawMessageHandler) (*MessengerResponse, error) {
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
var err error
|
|
|
|
var response MessengerResponse
|
|
|
|
|
|
|
|
installation, ok := m.allInstallations.Load(m.installationID)
|
|
|
|
if !ok {
|
|
|
|
return nil, errors.New("no installation found")
|
|
|
|
}
|
|
|
|
|
|
|
|
if installation.InstallationMetadata == nil {
|
|
|
|
return nil, errors.New("no installation metadata")
|
|
|
|
}
|
|
|
|
|
|
|
|
clock, chat := m.getLastClockWithRelatedChat()
|
|
|
|
|
|
|
|
pairMessage := &protobuf.SyncPairInstallation{
|
2024-10-07 14:05:37 +00:00
|
|
|
Clock: clock,
|
|
|
|
Name: installation.InstallationMetadata.Name,
|
|
|
|
InstallationId: installation.ID,
|
|
|
|
DeviceType: installation.InstallationMetadata.DeviceType,
|
|
|
|
Version: installation.Version,
|
|
|
|
TargetInstallationId: targetInstallationID,
|
|
|
|
}
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
encodedMessage, err := proto.Marshal(pairMessage)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
if rawMessageHandler == nil {
|
|
|
|
rawMessageHandler = m.dispatchPairInstallationMessage
|
|
|
|
}
|
|
|
|
_, err = rawMessageHandler(ctx, common.RawMessage{
|
|
|
|
LocalChatID: chat.ID,
|
|
|
|
Payload: encodedMessage,
|
|
|
|
MessageType: protobuf.ApplicationMetadataMessage_SYNC_PAIR_INSTALLATION,
|
|
|
|
ResendType: common.ResendTypeDataSync,
|
|
|
|
})
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
response.AddChat(chat)
|
|
|
|
|
|
|
|
chat.LastClockValue = clock
|
|
|
|
err = m.saveChat(chat)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
return &response, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
// SyncDevices sends all public chats and contacts to paired devices
|
|
|
|
// TODO remove use of photoPath in contacts
|
|
|
|
func (m *Messenger) SyncDevices(ctx context.Context, ensName, photoPath string, rawMessageHandler RawMessageHandler) (err error) {
|
|
|
|
if rawMessageHandler == nil {
|
|
|
|
rawMessageHandler = m.dispatchMessage
|
|
|
|
}
|
|
|
|
|
|
|
|
myID := contactIDFromPublicKey(&m.identity.PublicKey)
|
|
|
|
|
|
|
|
displayName, err := m.settings.DisplayName()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
if _, err = m.sendContactUpdate(ctx, myID, displayName, ensName, photoPath, m.account.GetCustomizationColor(), rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
m.allChats.Range(func(chatID string, chat *Chat) bool {
|
|
|
|
if !chat.shouldBeSynced() {
|
|
|
|
return true
|
|
|
|
|
|
|
|
}
|
|
|
|
err = m.syncChat(ctx, chat, rawMessageHandler)
|
|
|
|
return err == nil
|
|
|
|
})
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
m.allContacts.Range(func(contactID string, contact *Contact) bool {
|
|
|
|
if contact.ID == myID {
|
|
|
|
return true
|
|
|
|
}
|
|
|
|
if contact.LocalNickname != "" || contact.added() || contact.hasAddedUs() || contact.Blocked {
|
|
|
|
if err = m.syncContact(ctx, contact, rawMessageHandler); err != nil {
|
|
|
|
return false
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return true
|
|
|
|
})
|
|
|
|
|
|
|
|
cs, err := m.communitiesManager.JoinedAndPendingCommunitiesWithRequests()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
for _, c := range cs {
|
|
|
|
if err = m.syncCommunity(ctx, c, rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
bookmarks, err := m.browserDatabase.GetBookmarks()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
for _, b := range bookmarks {
|
|
|
|
if err = m.SyncBookmark(ctx, b, rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
trustedUsers, err := m.verificationDatabase.GetAllTrustStatus()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
for id, ts := range trustedUsers {
|
|
|
|
if err = m.SyncTrustedUser(ctx, id, ts, rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
verificationRequests, err := m.verificationDatabase.GetVerificationRequests()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
for i := range verificationRequests {
|
|
|
|
if err = m.SyncVerificationRequest(ctx, &verificationRequests[i], rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
err = m.syncSettings(rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
err = m.syncProfilePicturesFromDatabase(rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
if err = m.syncLatestContactRequests(ctx, rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
// we have to sync deleted keypairs as well
|
|
|
|
keypairs, err := m.settings.GetAllKeypairs()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
for _, kp := range keypairs {
|
|
|
|
err = m.syncKeypair(kp, rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// we have to sync deleted watch only accounts as well
|
|
|
|
woAccounts, err := m.settings.GetAllWatchOnlyAccounts()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
for _, woAcc := range woAccounts {
|
|
|
|
err = m.syncWalletAccount(woAcc, rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
savedAddresses, err := m.savedAddressesManager.GetRawSavedAddresses()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
for i := range savedAddresses {
|
|
|
|
sa := savedAddresses[i]
|
|
|
|
|
|
|
|
err = m.syncSavedAddress(ctx, sa, rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if err = m.syncEnsUsernameDetails(ctx, rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
if err = m.syncDeleteForMeMessage(ctx, rawMessageHandler); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
err = m.syncAccountsPositions(rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
err = m.syncProfileShowcasePreferences(context.Background(), rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) syncProfilePictures(rawMessageHandler RawMessageHandler, identityImages []*images.IdentityImage) error {
|
|
|
|
if !m.hasPairedDevices() {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
ctx, cancel := context.WithTimeout(context.Background(), 5*time.Second)
|
|
|
|
defer cancel()
|
|
|
|
|
|
|
|
pictures := make([]*protobuf.SyncProfilePicture, len(identityImages))
|
|
|
|
clock, chat := m.getLastClockWithRelatedChat()
|
|
|
|
for i, image := range identityImages {
|
|
|
|
p := &protobuf.SyncProfilePicture{}
|
|
|
|
p.Name = image.Name
|
|
|
|
p.Payload = image.Payload
|
|
|
|
p.Width = uint32(image.Width)
|
|
|
|
p.Height = uint32(image.Height)
|
|
|
|
p.FileSize = uint32(image.FileSize)
|
|
|
|
p.ResizeTarget = uint32(image.ResizeTarget)
|
|
|
|
if image.Clock == 0 {
|
|
|
|
p.Clock = clock
|
|
|
|
} else {
|
|
|
|
p.Clock = image.Clock
|
|
|
|
}
|
|
|
|
pictures[i] = p
|
|
|
|
}
|
|
|
|
|
|
|
|
message := &protobuf.SyncProfilePictures{}
|
|
|
|
message.KeyUid = m.account.KeyUID
|
|
|
|
message.Pictures = pictures
|
|
|
|
|
|
|
|
encodedMessage, err := proto.Marshal(message)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
rawMessage := common.RawMessage{
|
|
|
|
LocalChatID: chat.ID,
|
|
|
|
Payload: encodedMessage,
|
|
|
|
MessageType: protobuf.ApplicationMetadataMessage_SYNC_PROFILE_PICTURES,
|
|
|
|
ResendType: common.ResendTypeDataSync,
|
|
|
|
}
|
|
|
|
|
|
|
|
_, err = rawMessageHandler(ctx, rawMessage)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
chat.LastClockValue = clock
|
|
|
|
return m.saveChat(chat)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) syncLatestContactRequests(ctx context.Context, rawMessageHandler RawMessageHandler) error {
|
|
|
|
latestContactRequests, err := m.persistence.LatestContactRequests()
|
|
|
|
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
for _, r := range latestContactRequests {
|
|
|
|
if r.ContactRequestState == common.ContactRequestStateAccepted || r.ContactRequestState == common.ContactRequestStateDismissed {
|
|
|
|
accepted := r.ContactRequestState == common.ContactRequestStateAccepted
|
|
|
|
err = m.syncContactRequestDecision(ctx, r.MessageID, r.ContactID, accepted, rawMessageHandler)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) syncContactRequestDecision(ctx context.Context, requestID, contactId string, accepted bool, rawMessageHandler RawMessageHandler) error {
|
|
|
|
m.logger.Info("syncContactRequestDecision", zap.Any("from", requestID))
|
|
|
|
if !m.hasPairedDevices() {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
clock, chat := m.getLastClockWithRelatedChat()
|
|
|
|
|
|
|
|
var status protobuf.SyncContactRequestDecision_DecisionStatus
|
|
|
|
if accepted {
|
|
|
|
status = protobuf.SyncContactRequestDecision_ACCEPTED
|
|
|
|
} else {
|
|
|
|
status = protobuf.SyncContactRequestDecision_DECLINED
|
|
|
|
}
|
|
|
|
|
|
|
|
message := &protobuf.SyncContactRequestDecision{
|
|
|
|
RequestId: requestID,
|
|
|
|
ContactId: contactId,
|
|
|
|
Clock: clock,
|
|
|
|
DecisionStatus: status,
|
|
|
|
}
|
|
|
|
|
|
|
|
encodedMessage, err := proto.Marshal(message)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
rawMessage := common.RawMessage{
|
|
|
|
LocalChatID: chat.ID,
|
|
|
|
Payload: encodedMessage,
|
|
|
|
MessageType: protobuf.ApplicationMetadataMessage_SYNC_CONTACT_REQUEST_DECISION,
|
|
|
|
ResendType: common.ResendTypeDataSync,
|
|
|
|
}
|
|
|
|
|
|
|
|
_, err = rawMessageHandler(ctx, rawMessage)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) getLastClockWithRelatedChat() (uint64, *Chat) {
|
|
|
|
chatID := contactIDFromPublicKey(&m.identity.PublicKey)
|
|
|
|
|
|
|
|
chat, ok := m.allChats.Load(chatID)
|
|
|
|
if !ok {
|
|
|
|
chat = OneToOneFromPublicKey(&m.identity.PublicKey, m.getTimesource())
|
|
|
|
// We don't want to show the chat to the user
|
|
|
|
chat.Active = false
|
|
|
|
}
|
|
|
|
|
|
|
|
m.allChats.Store(chat.ID, chat)
|
|
|
|
clock, _ := chat.NextClockAndTimestamp(m.getTimesource())
|
|
|
|
|
|
|
|
return clock, chat
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) syncProfilePicturesFromDatabase(rawMessageHandler RawMessageHandler) error {
|
|
|
|
keyUID := m.account.KeyUID
|
|
|
|
identityImages, err := m.multiAccounts.GetIdentityImages(keyUID)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
return m.syncProfilePictures(rawMessageHandler, identityImages)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) InitInstallations() error {
|
|
|
|
installations, err := m.encryptor.GetOurInstallations(&m.identity.PublicKey)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
for _, installation := range installations {
|
|
|
|
m.allInstallations.Store(installation.ID, installation)
|
|
|
|
}
|
|
|
|
|
|
|
|
err = m.setInstallationHostname()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2024-08-30 15:59:03 +00:00
|
|
|
if m.telemetryClient != nil {
|
|
|
|
installation, ok := m.allInstallations.Load(m.installationID)
|
|
|
|
if ok {
|
|
|
|
m.telemetryClient.SetDeviceType(installation.InstallationMetadata.DeviceType)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) Installations() []*multidevice.Installation {
|
|
|
|
installations := make([]*multidevice.Installation, m.allInstallations.Len())
|
|
|
|
|
|
|
|
var i = 0
|
|
|
|
m.allInstallations.Range(func(installationID string, installation *multidevice.Installation) (shouldContinue bool) {
|
|
|
|
installations[i] = installation
|
|
|
|
i++
|
|
|
|
return true
|
|
|
|
})
|
|
|
|
return installations
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) setInstallationMetadata(id string, data *multidevice.InstallationMetadata) error {
|
|
|
|
installation, ok := m.allInstallations.Load(id)
|
|
|
|
if !ok {
|
|
|
|
return errors.New("no installation found")
|
|
|
|
}
|
|
|
|
|
|
|
|
installation.InstallationMetadata = data
|
|
|
|
return m.encryptor.SetInstallationMetadata(m.IdentityPublicKey(), id, data)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) SetInstallationMetadata(id string, data *multidevice.InstallationMetadata) error {
|
|
|
|
return m.setInstallationMetadata(id, data)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) SetInstallationName(id string, name string) error {
|
|
|
|
installation, ok := m.allInstallations.Load(id)
|
|
|
|
if !ok {
|
|
|
|
return errors.New("no installation found")
|
|
|
|
}
|
|
|
|
|
|
|
|
installation.InstallationMetadata.Name = name
|
|
|
|
return m.encryptor.SetInstallationName(m.IdentityPublicKey(), id, name)
|
|
|
|
}
|
|
|
|
|
2024-10-07 14:05:37 +00:00
|
|
|
// EnableInstallation enables an installation and returns the installation
|
|
|
|
func (m *Messenger) EnableInstallation(id string) (*multidevice.Installation, error) {
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
installation, ok := m.allInstallations.Load(id)
|
|
|
|
if !ok {
|
2024-10-07 14:05:37 +00:00
|
|
|
return nil, errors.New("no installation found")
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
err := m.encryptor.EnableInstallation(&m.identity.PublicKey, id)
|
|
|
|
if err != nil {
|
2024-10-07 14:05:37 +00:00
|
|
|
return nil, err
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
}
|
|
|
|
installation.Enabled = true
|
|
|
|
// TODO(samyoul) remove storing of an updated reference pointer?
|
|
|
|
m.allInstallations.Store(id, installation)
|
2024-10-07 14:05:37 +00:00
|
|
|
return installation, nil
|
feat: fallback pairing seed (#5614)
* feat(pairing)!: Add extra parameters and remove v2 compatibility
This commit includes the following changes:
I have added a flag to maintain 2.29 compatibility.
Breaking change in connection string
The local pairing code that was parsing the connection string had a few non-upgradable features:
It was strictly checking the number of parameters, throwing an error if the number was different. This made it impossible to add parameters to it without breaking.
It was strictly checking the version number. This made increasing the version number impossible as older client would just refuse to connect.
The code has been changed so that:
Two parameters have been added, installation-id and key-uid. Those are needed for the fallback flow.
I have also removed version from the payload, since it wasn't used.
This means that we don't support v1 anymore. V2 parsing is supported . Going forward there's a clear strategy on how to update the protocol (append parameters, don't change existing one).
https://www.youtube.com/watch?v=oyLBGkS5ICk Is a must watch video for understanding the strategy
Changed MessengerResponse to use internally a map of installations rather than an array (minor)
Just moving towards maps as arrays tend to lead to subtle bugs.
Moved pairing methods to messenger_pairing.go
Just moved some methods
Added 2 new methods for the fallback flow
FinishPairingThroughSeedPhraseProcess
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R29
EnableAndSyncInstallation
https://github.com/status-im/status-go/pull/5567/files#diff-1ad620b07fa3bd5fbc96c9f459d88829938a162bf1aaf41c61dea6e38b488d54R18
Flow for clients
Client A1 is logged in
Client A2 is logged out
Client A1 shows a QR code
Client A2 scans a QR code
If connection fails on A2, the user will be prompted to enter a seed phrase.
If the generated account matches the key-uid from the QR code, A2 should call FinishPairingThroughSeedPhraseProcess with the installation id passed in the QR code. This will send installation information over waku. The user should be shown its own installation id and prompted to check the other device.
Client A1 will receive new installation data through waku, if they are still on the qr code page, they should show a popup to the user showing the received installation id, and a way to Enable and Sync, which should call the EnableAndSyncInstallation endpoint. This should finish the fallback syncing flow.
Current issues
Currently I haven't tested that all the data is synced after finishing the flow. I see that the two devices are paired correctly, but for example the DisplayName is not changed on the receiving device. I haven't had time to look into it further.
* test_: add more test for connection string parser
* fix_: fix panic when parse old connection string
* test_: add comments for TestMessengerPairAfterSeedPhrase
* fix_: correct error description
* feat_:rename FinishPairingThroughSeedPhraseProcess to EnableInstallationAndPair
* fix_: delete leftover
* fix_: add UniqueKey method
* fix_: unify the response for InputConnectionStringForBootstrapping
* fix_: remove fields installationID and keyUID in GethStatusBackend
* fix_: rename messenger_pairing to messenger_pairing_and_syncing
---------
Co-authored-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
2024-07-30 09:14:05 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
func (m *Messenger) DisableInstallation(id string) error {
|
|
|
|
installation, ok := m.allInstallations.Load(id)
|
|
|
|
if !ok {
|
|
|
|
return errors.New("no installation found")
|
|
|
|
}
|
|
|
|
|
|
|
|
err := m.encryptor.DisableInstallation(&m.identity.PublicKey, id)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
installation.Enabled = false
|
|
|
|
// TODO(samyoul) remove storing of an updated reference pointer?
|
|
|
|
m.allInstallations.Store(id, installation)
|
|
|
|
return nil
|
|
|
|
}
|