status-go/waku/v0/peer.go

651 lines
19 KiB
Go
Raw Permalink Normal View History

Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
package v0
import (
"bytes"
"errors"
"fmt"
"io"
"io/ioutil"
"math"
"net"
"sync"
"time"
"go.uber.org/zap"
mapset "github.com/deckarep/golang-set"
gethcommon "github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/rlp"
"github.com/status-im/status-go/eth-node/types"
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
gocommon "github.com/status-im/status-go/common"
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
"github.com/status-im/status-go/waku/common"
)
// Peer is the implementation of the Peer interface and represents a remote Waku client with which the local host Waku
// instance exchanges data / messages.
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
type Peer struct {
host common.WakuHost
rw p2p.MsgReadWriter
p2pPeer *p2p.Peer
logger *zap.Logger
quit chan struct{}
trusted bool
powRequirement float64
// bloomMu is to allow thread safe access to
// the bloom filter
bloomMu sync.Mutex
bloomFilter []byte
// topicInterestMu is to allow thread safe access to
// the map of topic interests
topicInterestMu sync.Mutex
topicInterest map[common.TopicType]bool
// fullNode is used to indicate that the node will be accepting any
// envelope. The opposite is an "empty node" , which is when
// a bloom filter is all 0s or topic interest is an empty map (not nil).
// In that case no envelope is accepted.
fullNode bool
confirmationsEnabled bool
rateLimitsMu sync.Mutex
rateLimits common.RateLimits
stats *common.StatsTracker
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
known mapset.Set // Messages already known by the peer to avoid wasting bandwidth
}
func NewPeer(host common.WakuHost, p2pPeer *p2p.Peer, rw p2p.MsgReadWriter, logger *zap.Logger, stats *common.StatsTracker) common.Peer {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if logger == nil {
logger = zap.NewNop()
}
return &Peer{
host: host,
p2pPeer: p2pPeer,
logger: logger,
rw: rw,
trusted: false,
powRequirement: 0.0,
known: mapset.NewSet(),
quit: make(chan struct{}),
bloomFilter: common.MakeFullNodeBloom(),
fullNode: true,
stats: stats,
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
}
func (p *Peer) Start() error {
if err := p.handshake(); err != nil {
return err
}
go p.update()
p.logger.Debug("starting peer", zap.String("peerID", types.EncodeHex(p.ID())))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return nil
}
func (p *Peer) Stop() {
close(p.quit)
p.logger.Debug("stopping peer", zap.String("peerID", types.EncodeHex(p.ID())))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) NotifyAboutPowRequirementChange(pow float64) error {
i := math.Float64bits(pow)
return p2p.Send(p.rw, statusUpdateCode, StatusOptions{PoWRequirement: &i})
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) NotifyAboutBloomFilterChange(bloom []byte) error {
return p2p.Send(p.rw, statusUpdateCode, StatusOptions{BloomFilter: bloom})
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) NotifyAboutTopicInterestChange(topics []common.TopicType) error {
return p2p.Send(p.rw, statusUpdateCode, StatusOptions{TopicInterest: topics})
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) SetPeerTrusted(trusted bool) {
p.trusted = trusted
}
func (p *Peer) RequestHistoricMessages(envelope *common.Envelope) error {
return p2p.Send(p.rw, p2pRequestCode, envelope)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) SendHistoricMessageResponse(payload []byte) error {
size, r, err := rlp.EncodeToReader(payload)
if err != nil {
return err
}
return p.rw.WriteMsg(p2p.Msg{Code: p2pRequestCompleteCode, Size: uint32(size), Payload: r})
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) SendP2PMessages(envelopes []*common.Envelope) error {
return p2p.Send(p.rw, p2pMessageCode, envelopes)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) SendRawP2PDirect(envelopes []rlp.RawValue) error {
return p2p.Send(p.rw, p2pMessageCode, envelopes)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) SetRWWriter(rw p2p.MsgReadWriter) {
p.rw = rw
}
// Mark marks an envelope known to the peer so that it won't be sent back.
func (p *Peer) Mark(envelope *common.Envelope) {
p.known.Add(envelope.Hash())
}
// Marked checks if an envelope is already known to the remote peer.
func (p *Peer) Marked(envelope *common.Envelope) bool {
return p.known.Contains(envelope.Hash())
}
func (p *Peer) BloomFilter() []byte {
p.bloomMu.Lock()
defer p.bloomMu.Unlock()
bloomFilterCopy := make([]byte, len(p.bloomFilter))
copy(bloomFilterCopy, p.bloomFilter)
return bloomFilterCopy
}
func (p *Peer) PoWRequirement() float64 {
return p.powRequirement
}
func (p *Peer) ConfirmationsEnabled() bool {
return p.confirmationsEnabled
}
// ID returns a peer's id
func (p *Peer) ID() []byte {
id := p.p2pPeer.ID()
return id[:]
}
func (p *Peer) EnodeID() enode.ID {
return p.p2pPeer.ID()
}
func (p *Peer) IP() net.IP {
return p.p2pPeer.Node().IP()
}
func (p *Peer) Run() error {
logger := p.logger.Named("Run")
for {
// fetch the next packet
packet, err := p.rw.ReadMsg()
if err != nil {
logger.Info("failed to read a message", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
if packet.Size > p.host.MaxMessageSize() {
logger.Warn("oversize message received", zap.String("peerID", types.EncodeHex(p.ID())), zap.Uint32("size", packet.Size))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return errors.New("oversize message received")
}
if err := p.handlePacket(packet); err != nil {
logger.Warn("failed to handle packet message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
_ = packet.Discard()
}
}
func (p *Peer) handlePacket(packet p2p.Msg) error {
switch packet.Code {
case messagesCode:
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := p.handleMessagesCode(packet); err != nil {
p.logger.Warn("failed to handle messagesCode message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
case messageResponseCode:
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := p.handleMessageResponseCode(packet); err != nil {
p.logger.Warn("failed to handle messageResponseCode message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
case batchAcknowledgedCode:
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := p.handleBatchAcknowledgeCode(packet); err != nil {
p.logger.Warn("failed to handle batchAcknowledgedCode message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
case statusUpdateCode:
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := p.handleStatusUpdateCode(packet); err != nil {
p.logger.Warn("failed to decode status update message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
case p2pMessageCode:
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := p.handleP2PMessageCode(packet); err != nil {
p.logger.Warn("failed to decode direct message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
case p2pRequestCode:
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := p.handleP2PRequestCode(packet); err != nil {
p.logger.Warn("failed to decode p2p request message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
case p2pRequestCompleteCode:
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := p.handleP2PRequestCompleteCode(packet); err != nil {
p.logger.Warn("failed to decode p2p request complete message, peer will be disconnected", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
default:
// New message common might be implemented in the future versions of Waku.
// For forward compatibility, just ignore.
p.logger.Debug("ignored packet with message code", zap.Uint64("code", packet.Code))
}
return nil
}
func (p *Peer) handleMessagesCode(packet p2p.Msg) error {
// decode the contained envelopes
data, err := ioutil.ReadAll(packet.Payload)
if err != nil {
common.EnvelopesRejectedCounter.WithLabelValues("failed_read").Inc()
return fmt.Errorf("failed to read packet payload: %v", err)
}
var envelopes []*common.Envelope
if err := rlp.DecodeBytes(data, &envelopes); err != nil {
common.EnvelopesRejectedCounter.WithLabelValues("invalid_data").Inc()
return fmt.Errorf("invalid payload: %v", err)
}
envelopeErrors, err := p.host.OnNewEnvelopes(envelopes, p)
if p.host.ConfirmationsEnabled() {
go p.sendConfirmation(data, envelopeErrors) // nolint: errcheck
}
return err
}
func (p *Peer) handleMessageResponseCode(packet p2p.Msg) error {
var resp MultiVersionResponse
if err := packet.Decode(&resp); err != nil {
common.EnvelopesRejectedCounter.WithLabelValues("failed_read").Inc()
return fmt.Errorf("invalid response message: %v", err)
}
if resp.Version != 1 {
p.logger.Info("received unsupported version of MultiVersionResponse for messageResponseCode packet", zap.Uint("version", resp.Version))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return nil
}
response, err := resp.DecodeResponse1()
if err != nil {
common.EnvelopesRejectedCounter.WithLabelValues("invalid_data").Inc()
return fmt.Errorf("failed to decode response message: %v", err)
}
return p.host.OnMessagesResponse(response, p)
}
func (p *Peer) handleP2PRequestCode(packet p2p.Msg) error {
// Must be processed if mail server is implemented. Otherwise ignore.
if !p.host.Mailserver() {
return nil
}
// Read all data as we will try to decode it possibly twice.
data, err := ioutil.ReadAll(packet.Payload)
if err != nil {
return fmt.Errorf("invalid p2p request messages: %v", err)
}
r := bytes.NewReader(data)
packet.Payload = r
var requestDeprecated common.Envelope
errDepReq := packet.Decode(&requestDeprecated)
if errDepReq == nil {
return p.host.OnDeprecatedMessagesRequest(&requestDeprecated, p)
}
p.logger.Info("failed to decode p2p request message (deprecated)", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(errDepReq))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
// As we failed to decode the request, let's set the offset
// to the beginning and try decode it again.
if _, err := r.Seek(0, io.SeekStart); err != nil {
return fmt.Errorf("invalid p2p request message: %v", err)
}
var request common.MessagesRequest
errReq := packet.Decode(&request)
if errReq == nil {
return p.host.OnMessagesRequest(request, p)
}
p.logger.Info("failed to decode p2p request message", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(errReq))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return errors.New("invalid p2p request message")
}
func (p *Peer) handleBatchAcknowledgeCode(packet p2p.Msg) error {
var batchHash gethcommon.Hash
if err := packet.Decode(&batchHash); err != nil {
return fmt.Errorf("invalid batch ack message: %v", err)
}
return p.host.OnBatchAcknowledged(batchHash, p)
}
func (p *Peer) handleStatusUpdateCode(packet p2p.Msg) error {
var StatusOptions StatusOptions
err := packet.Decode(&StatusOptions)
if err != nil {
p.logger.Error("failed to decode status-options", zap.Error(err))
common.EnvelopesRejectedCounter.WithLabelValues("invalid_settings_changed").Inc()
return err
}
return p.setOptions(StatusOptions)
}
func (p *Peer) handleP2PMessageCode(packet p2p.Msg) error {
// peer-to-peer message, sent directly to peer bypassing PoW checks, etc.
// this message is not supposed to be forwarded to other peers, and
// therefore might not satisfy the PoW, expiry and other requirements.
// these messages are only accepted from the trusted peer.
if !p.trusted {
return nil
}
var (
envelopes []*common.Envelope
err error
)
if err = packet.Decode(&envelopes); err != nil {
return fmt.Errorf("invalid direct message payload: %v", err)
}
return p.host.OnNewP2PEnvelopes(envelopes)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}
func (p *Peer) handleP2PRequestCompleteCode(packet p2p.Msg) error {
if !p.trusted {
return nil
}
var payload []byte
if err := packet.Decode(&payload); err != nil {
return fmt.Errorf("invalid p2p request complete message: %v", err)
}
return p.host.OnP2PRequestCompleted(payload, p)
}
// sendConfirmation sends messageResponseCode and batchAcknowledgedCode messages.
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
func (p *Peer) sendConfirmation(data []byte, envelopeErrors []common.EnvelopeError) (err error) {
defer gocommon.LogOnPanic()
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
batchHash := crypto.Keccak256Hash(data)
err = p2p.Send(p.rw, messageResponseCode, NewMessagesResponse(batchHash, envelopeErrors))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err != nil {
return
}
err = p2p.Send(p.rw, batchAcknowledgedCode, batchHash) // DEPRECATED
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return
}
// handshake sends the protocol initiation status message to the remote peer and
// verifies the remote status too.
func (p *Peer) handshake() error {
// Send the handshake status message asynchronously
errc := make(chan error, 1)
opts := StatusOptionsFromHost(p.host)
go func() {
defer gocommon.LogOnPanic()
errc <- p2p.SendItems(p.rw, statusCode, Version, opts)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
}()
// Fetch the remote status packet and verify protocol match
packet, err := p.rw.ReadMsg()
if err != nil {
return err
}
if packet.Code != statusCode {
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return fmt.Errorf("p [%x] sent packet %x before status packet", p.ID(), packet.Code)
}
var (
peerProtocolVersion uint64
peerOptions StatusOptions
)
s := rlp.NewStream(packet.Payload, uint64(packet.Size))
if _, err := s.List(); err != nil {
return fmt.Errorf("p [%x]: failed to decode status packet: %v", p.ID(), err)
}
// Validate protocol version.
if err := s.Decode(&peerProtocolVersion); err != nil {
return fmt.Errorf("p [%x]: failed to decode peer protocol version: %v", p.ID(), err)
}
if peerProtocolVersion != Version {
return fmt.Errorf("p [%x]: protocol version mismatch %d != %d", p.ID(), peerProtocolVersion, Version)
}
// Decode and validate other status packet options.
if err := s.Decode(&peerOptions); err != nil {
return fmt.Errorf("p [%x]: failed to decode status options: %v", p.ID(), err)
}
if err := s.ListEnd(); err != nil {
return fmt.Errorf("p [%x]: failed to decode status packet: %v", p.ID(), err)
}
if err := p.setOptions(peerOptions.WithDefaults()); err != nil {
return fmt.Errorf("p [%x]: failed to set options: %v", p.ID(), err)
}
if err := <-errc; err != nil {
return fmt.Errorf("p [%x] failed to send status packet: %v", p.ID(), err)
}
return nil
}
// update executes periodic operations on the peer, including message transmission
// and expiration.
func (p *Peer) update() {
defer gocommon.LogOnPanic()
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
// Start the tickers for the updates
expire := time.NewTicker(common.ExpirationCycle)
transmit := time.NewTicker(common.TransmissionCycle)
// Loop and transmit until termination is requested
for {
select {
case <-expire.C:
p.expire()
case <-transmit.C:
if err := p.broadcast(); err != nil {
p.logger.Debug("broadcasting failed", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return
}
case <-p.quit:
return
}
}
}
func (p *Peer) setOptions(peerOptions StatusOptions) error {
p.logger.Debug("settings options", zap.String("peerID", types.EncodeHex(p.ID())), zap.Any("Options", peerOptions))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err := peerOptions.Validate(); err != nil {
return fmt.Errorf("p [%x]: sent invalid options: %v", p.ID(), err)
}
// Validate and save peer's PoW.
pow := peerOptions.PoWRequirementF()
if pow != nil {
if math.IsInf(*pow, 0) || math.IsNaN(*pow) || *pow < 0.0 {
return fmt.Errorf("p [%x]: sent bad status message: invalid pow", p.ID())
}
p.powRequirement = *pow
}
if peerOptions.TopicInterest != nil {
p.setTopicInterest(peerOptions.TopicInterest)
} else if peerOptions.BloomFilter != nil {
// Validate and save peer's bloom filters.
bloom := peerOptions.BloomFilter
bloomSize := len(bloom)
if bloomSize != 0 && bloomSize != common.BloomFilterSize {
return fmt.Errorf("p [%x] sent bad status message: wrong bloom filter size %d", p.ID(), bloomSize)
}
p.setBloomFilter(bloom)
}
if peerOptions.LightNodeEnabled != nil {
// Validate and save other peer's options.
if *peerOptions.LightNodeEnabled && p.host.LightClientMode() && p.host.LightClientModeConnectionRestricted() {
return fmt.Errorf("p [%x] is useless: two light client communication restricted", p.ID())
}
}
if peerOptions.ConfirmationsEnabled != nil {
p.confirmationsEnabled = *peerOptions.ConfirmationsEnabled
}
if peerOptions.RateLimits != nil {
p.setRateLimits(*peerOptions.RateLimits)
}
return nil
}
// expire iterates over all the known envelopes in the host and removes all
// expired (unknown) ones from the known list.
func (p *Peer) expire() {
unmark := make(map[gethcommon.Hash]struct{})
p.known.Each(func(v interface{}) bool {
if !p.host.IsEnvelopeCached(v.(gethcommon.Hash)) {
unmark[v.(gethcommon.Hash)] = struct{}{}
}
return true
})
// Dump all known but no longer cached
for hash := range unmark {
p.known.Remove(hash)
}
}
// broadcast iterates over the collection of envelopes and transmits yet unknown
// ones over the network.
func (p *Peer) broadcast() error {
envelopes := p.host.Envelopes()
bundle := make([]*common.Envelope, 0, len(envelopes))
for _, envelope := range envelopes {
if !p.Marked(envelope) && envelope.PoW() >= p.powRequirement && p.topicOrBloomMatch(envelope) {
bundle = append(bundle, envelope)
}
}
if len(bundle) == 0 {
return nil
}
batchHash, err := p.SendBundle(bundle)
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
if err != nil {
p.logger.Debug("failed to deliver envelopes", zap.String("peerID", types.EncodeHex(p.ID())), zap.Error(err))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return err
}
// mark envelopes only if they were successfully sent
for _, e := range bundle {
p.Mark(e)
event := common.EnvelopeEvent{
Event: common.EventEnvelopeSent,
Hash: e.Hash(),
Peer: p.EnodeID(),
}
if p.confirmationsEnabled {
event.Batch = batchHash
}
p.host.SendEnvelopeEvent(event)
}
p.logger.Debug("broadcasted bundles successfully", zap.String("peerID", types.EncodeHex(p.ID())), zap.Int("count", len(bundle)))
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
return nil
}
func (p *Peer) SendBundle(bundle []*common.Envelope) (rst gethcommon.Hash, err error) {
data, err := rlp.EncodeToBytes(bundle)
if err != nil {
return
}
err = p.rw.WriteMsg(p2p.Msg{
Code: messagesCode,
Size: uint32(len(data)),
Payload: bytes.NewBuffer(data),
})
if err != nil {
return
}
return crypto.Keccak256Hash(data), nil
}
Move networking code for waku under `v0` namespace Why make the change? As discussed previously, the way we will move across versions is to maintain completely separate codebases and eventually remove those that are not supported anymore. This has the drawback of some code duplication, but the advantage is that is more explicit what each version requires, and changes in one version will not impact the other, so we won't pile up backward compatible code. This is the same strategy used by `whisper` in go ethereum and is influenced by https://www.youtube.com/watch?v=oyLBGkS5ICk . All the code that is used for the networking protocol is now under `v0/`. Some of the common parts might still be refactored out. The main namespace `waku` deals with `host`->`waku` interactions (through RPC), while `v0` deals with `waku`->`remote-waku` interactions. In order to support `v1`, the namespace `v0` will be copied over, and changed to support `v1`. Once `v0` will be not used anymore, the whole namespace will be removed. This PR does not actually implement `v1`, I'd rather get things looked over to make sure the structure is what we would like before implementing the changes. What has changed? - Moved all code for the common parts under `waku/common/` namespace - Moved code used for bloomfilters in `waku/common/bloomfilter.go` - Removed all version specific code from `waku/common/const` (`ProtocolVersion`, status-codes etc) - Added interfaces for `WakuHost` and `Peer` under `waku/common/protocol.go` Things still to do Some tests in `waku/` are still testing by stubbing components of a particular version (`v0`). I started moving those tests to instead of stubbing using the actual component, which increases the testing surface. Some other tests that can't be easily ported should be likely moved under `v0` instead. Ideally no version specif code should be exported from a version namespace (for example the various codes, as those might change across versions). But this will be a work-in-progress. Some code that will be common in `v0`/`v1` could still be extract to avoid duplication, and duplicated only when implementations diverge across versions.
2020-04-21 12:40:30 +00:00
func (p *Peer) setBloomFilter(bloom []byte) {
p.bloomMu.Lock()
defer p.bloomMu.Unlock()
p.bloomFilter = bloom
p.fullNode = common.IsFullNode(bloom)
if p.fullNode && p.bloomFilter == nil {
p.bloomFilter = common.MakeFullNodeBloom()
}
p.topicInterest = nil
}
func (p *Peer) setTopicInterest(topicInterest []common.TopicType) {
p.topicInterestMu.Lock()
defer p.topicInterestMu.Unlock()
if topicInterest == nil {
p.topicInterest = nil
return
}
p.topicInterest = make(map[common.TopicType]bool)
for _, topic := range topicInterest {
p.topicInterest[topic] = true
}
p.fullNode = false
p.bloomFilter = nil
}
func (p *Peer) setRateLimits(r common.RateLimits) {
p.rateLimitsMu.Lock()
p.rateLimits = r
p.rateLimitsMu.Unlock()
}
// topicOrBloomMatch matches against topic-interest if topic interest
// is not nil. Otherwise it will match against the bloom-filter.
// If the bloom-filter is nil, or full, the node is considered a full-node
// and any envelope will be accepted. An empty topic-interest (but not nil)
// signals that we are not interested in any envelope.
func (p *Peer) topicOrBloomMatch(env *common.Envelope) bool {
p.topicInterestMu.Lock()
topicInterestMode := p.topicInterest != nil
p.topicInterestMu.Unlock()
if topicInterestMode {
return p.topicInterestMatch(env)
}
return p.bloomMatch(env)
}
func (p *Peer) topicInterestMatch(env *common.Envelope) bool {
p.topicInterestMu.Lock()
defer p.topicInterestMu.Unlock()
if p.topicInterest == nil {
return false
}
return p.topicInterest[env.Topic]
}
func (p *Peer) bloomMatch(env *common.Envelope) bool {
p.bloomMu.Lock()
defer p.bloomMu.Unlock()
return p.fullNode || common.BloomFilterMatch(p.bloomFilter, env.Bloom())
}