Fixes#11514
The problem was that we were not handling the error from request to join correctly.
Then I added an event that sends a signal to the QML to show a toast about an error. I don't show the actual error to the user because usually it's not super helpful. It will be in the logs.
The status-go change makes it so that we don't save the request to join if the permission check failed.
- Added start panel in tokens welcome page.
- Added start panel in airdrop welcome page.
- Updated e2e tests according to new requirements.
Closes#11284
1. Adding OverviewSettingsFooter.qml according to design
2. Adding the footer to storybook
3. Add the footer in the overview page
4. Remove the squish tests for the old footer
The same components are used to display data from rootStore.assetsModel,
rootStore.collectiblesModel (permissions) and
root.community.communityTokens (airdrops). The models have different
roles and need adjustments before passing to ui components.
Closes: #11309
Additionally:
- stack components directly define content of the left list
- fixed navigation from Permissions section to minting
- various code style fixes
Closes: #11179
- It creates specific token artwork panel for owner token and token master token representation.
- It adds support to new component in storybook.
Closes#11294
Fixes#11272
The problem was that we didn't handle the cancelation (checking with password was empty).
Now we do and we send the signal to cancel when it's the case.
permissions
This commit fixes a bug that admins are not able to do any permission
actions (editing/deleting). The issue was that there was a check for
those CTAs only to be visible if the logged-in user is the owner of the
community, not an admin.
Closes#11092
Bump status-go to include required changes
Refactor the API usage to use the new async APIs.
Support multiple events in the same block
Report loading state for all the APIs
Also
- fix the loadingData state in the controller.nim
- reset the model to empty when the filter is invalidated due to
address and chain IDs change
Closes#11170
- header buttions/title/subtitle simplified
- no need to use states
- no need to use internal `d` object to pass data between pages
- permissions list scroll position preserved when navigation back from
other views
- storybook: allow "back" navigation to cover whole flow in sb
- fix some regressions in permissions-related pages
improved
- management of header simplified, no states needed
- no need to use StackViewStates helper
- no need to use internal `d` object as a proxy to pass data between
pages
- StackView used as a base class
- clipping problems fixed (#11285)
- scrolling problems fixed (#11289)
- all flows working from the storybook
- header management simplified
Closes: #11285Closes: #11298
Welcome info is a placeholder when list of tokens is empty. For that
reason is hander to keep in MintedTokensView instead of in MintedTokensSettingsPanel
and maintain additional state for that.
- Renamed main `CommunitiesPortal` folder to `Communities`.
- Created new `layouts` folder.
- Moved layout files from chat to communities.
- Created new `helpers` folder.
- Moved helpers files from chat to communities.
- Moved `controls/community` files from chat to communities `controls`.
- Moved `panels/communities` files from chat to communities `panels`.
- Moved `popups/community` files from chat to communities `popups`.
- Moved `views/community` files from chat to communities `views`.
- Moved `CommunityBanner` file from shared to `Communities/controls`. Only used in communities context.
- Moved `CommunitySettingsView` and `CommunityColumnView` files from chat to communities `views`.
- Moved `PermissionsStore.qml` file to `shared/stores`.
- Updated imports.
- Updated storybook.
Part of #6204
Fixes checking for duplicate token name in a case insensitive manner
Redo the `ModelUtils.contains(model, roleName, value, mode =
Qt.CaseSensitive)` in C++; more speed and add ability to search case in/
sensitive
Some more smaller fixes/speedups
Fixes#11204
Fixes#11125
Updates the communities asset and collectibles lists when a new token is deployed.
Also refactors the section module to remove all that code and use the communities token list instead.
Adds community ID to the token list model so that we can show only the global tokens and the tokens from the community are shown in the community
This hides the action items to kick or ban users if they happen to be
admins. There's also a change in status-go that prevents admins to kick
or ban other admins that has to land first here:
https://github.com/status-im/status-go/pull/3666Closes#10936
- Footer options must be disabled until minting process is completed.
- Airdrop footer option must be disabled if not available tokens to airdrop.
- Remotely destruct footer option must be disabled if no hodlers.
Fixes#11198
- After a rebase, signal properties were modified incorrectly.
- Also added protection to not push into the stack the same state more than ones and reset holdings model each time it is set.
Fixes#11147
Refactor code to use the token identity instead of token code
Removed the debugging activity view as now we have the API integrated
in the history view
Fixed the activity type in the activity entry
Closes: #11025
- introduce StatusButton storybook page with controls to play around
with the its options and variants
- StatusBaseButton: make the content item horizontally centered by
default
- StatusBaseButton: remove `textAlignment` and fix `textFillWidth` for
the intended usage
- fixup usage of the 2 above options which were introduced merely as a
workaround, mostly in wallet + corresponding storybook pages
Fixes#10903
Fixes#10410
Adds the permission model to the curated communities model.
Also fixes the assetsModel and collectiblesModel used by the community portal, because it was using the basic Chat Store created in AppMain, but that store doesn't have the assets model.
- Added assets model.
- Added no data text for assets tab.
- Added navigation from airdrop to mint specific tab.
- Updated `HoldingsDropdown` component to allow network information for assets.
- Removed `isCollectiblesOnly` option in `HoldingsDropdown`. No longer needed.
- Updated `storybook` to support airdrop assets testing.
Closes#11056
- differentiate between "Close" and "Leave" a community where the former
applies to spectated communities
- move the "leave community" confirmation popup to a shared place
(Popups.qml), extend it with the outro message and reuse it everywhere
- don't let admins leave a community
- some minor cleanups and dead code removals
Fixes#10963
- Added support for selecting a specific `chainId` in `NetworkFilter.qml`.
- Added `storybook` use case for selecting specific `chainId` in single selection mode.
Part of #11030
Fixes#10101
The problem was quite weird. The camera worked, but only when not **directly** in a Loader.
So I fixed by moving the Loader outside of StatusQrCodeScanner and into its parent SyncDeviceFromMobile.
The bahaviour is the same. We get a button asking to enable the camera, then we load the Scanner component. Before the Loader contained only the Camera component.
- Updated name and description regex rules.
- Extended name and symbol validation when retry minting to allow same text if we are in edition mode.
Fixes#10860
- Created `TokenObject` files and use them inside `CommunityNewTokenView` instead of plain properties.
- Updated `CommunityTokenView` to use `TokenObject` properties instead of plain properties.
- Updated store calls to use `TokenObject` properties instead of plain properties.
- Remote destruct properties renames.
- Airdrop navigation extended passing token type (asset or collectible).
- Updated `storybook` according to new changes.
New list contains also dropdown menu with some actions, basic
integration is done for holder types and actions supported currently
by the backend.
Closes: #10621
Set the `KeyNavigation.backtab` to itself to avoid accidentally pressing
`Shift+Tab` and tab away from the focused `StatusInput` (which makes it
look like it's disabled)
Fixes#10561
Detect the MIME type using `QMimeDatabase` from the actual content and
save it in that same format using `QSaveFile`, as `QImage` does NOT
support saving a GIF
Fixes#10747
- causing too many regressions along the way
- most of our popups are already destroyed properly inside Popups.qml
- in general, a Popup (Dialog, Menu, etc.) can be manually destroyed iff
it had been created using `Component.createObject()`, otherwise it's gone
for good until restart
- manually enabled the destroy-on-close in verified cases
Fixes#10948 (maybe some other dupes)
* feat(Chat): Display MutualStateUpdate system messages in 1-to-1 chats
* feat(ActivityCenter): Add AC notification when a user get removed by another contact
* fix: crutch fixing segfault on contact removal
- exchange the direct input with a calendar popup
- extend the validation of the range (so that from < to === true, etc)
- remove direct input components (Status[Base]DateInput.qml)
Fixes#10900
We no longer want to show pending membership requests in the left column
of the layout. Instead, community owners need to go to the community
settings -> members -> Pending requests
This however does not remove the legacy membership popup yet because
it's still used when users click the OS notification of incoming
community requests to join.
We don't yet have a mechanism to make the app navigate specifically to
that section of the community settings.
- It refactors `SettingsPageLayout`.
- It adds `retry mint` and `delete` options when deploy process fails.
- It renames `RemotelyDestructAlertPopup` to generic name `AlertPopup`.
- Added assets list UI.
- Added shape rectangle for empty lists.
- Added filter by asset / by collectible
- Updated storybook accordingly.
- Added flow to open token view depending on type
Closes#10625
Fixes#10501
The problem was that didn't have access to the updated contact from status-go after banning or unbanning, so we just changed the banned property, but there is more that gets changed in the backend, like `removed` being set to `true` as well.
With this fix, when you unban someone, you go back to a fresh start, as **non** contact, so you need to send a request again. That was the state you got if you restarted the app, so "re-sync" the state with status-go.
Another issue was on the frontend (QML). When banned, and after restarting to get the right state, the unban button would be disabled and the Add contact request button would show, which is not good. We only want to send requests when unbanned.
Fixes#9736
When pasting the chat key of a user to whom you already sent a request to, but for which they haven't answered yet, we open the popup instead of doing nothing.
If you paste the chat key of a user you are not a contact at all and sent no request, it opens the contact request popup as before.
Also, same as before, if you paste the key of a mutual contact, their name will show in the suggestion list.
Bumps status-go HEAD to include required changes
Updates Nim filter components and APIs to follow API changes in
status-go
Complete the debugging code
Add TODO placeholders to be completed in follow up PRs: collectibles ...
General improvements and refactoring
Closes#10634
If selected origin is an origin migrate to a keycard the following options are disabled:
- drop down menu (where user is able to select one of predefined paths) in custom derivation section
- reset button
Add the possibility of retrieving the data of wallet activity based
on the given filter criteria.
Major changes:
- Bump status-go with the new equivalent API
- Add temporary developer tools
- Debugging ActivityView QML component to test filter and display
the activity
- Add activity Nim package and synchronous controller and model
Considerations
- Have the model synchronous for the first iteration and then move to
async while implementing the fetching mechanism
- Use QtObject instances in the model instead of roles over items as
agreed with the team
- Simplify the implementation by having a simple presentation layer
using backend (service also in the future)
- Small required fixes and improvements
Closes: #10633
Updates #10366
- It updates `CommunityCollectibleView` to display minting failure state.
- It updates `CommunityMintedTokensView` to display minting failure state.
- It exposes subtitle color property in `CollectibleView`.
- It updates `storybook` with more options to display minting failure state.
Closes#10620
- Added property `remotelyDestructState` and `burnState` in `CommunityCollectibleView`.
- Added `fire` and `loading` icons while destruct/burn is in progress.
- Added short animation when destruct/burn process is completed.
- Renamed `Constants.DeployState` to `Constants.BackendProcessState`, more generic one that can be used for different processes.
- Updated `storybook` with new options to test animation.
Closes#10603
- Title format changed. Now symbol is a title side text.
- Back button text changed.
- Description / boxes order changed.
- Boxes changed order and format.
- Warning description changed.
Closes#10601
Added available tokens and total supply as subtitle information in minted collectibles view.
Updated storybook model with new property `availableTokens`.
Closes#10606
Replaced basic image selector to `EditCroppedImagePanel` component in mint token workflow.
Extended `NoImageUploadedPanel` to allow custom texts and some sizing improvements.
UI part of #10317
- Updated expected model roles (removed `selfDestruct` and `selfDestructAmount`)
- Self destruct tokens list management is now done inside `SelfDestructPopup).
- Store receives a js array with {walletAddress, amount} roles.
- replace qml owners model with Nim one
- get token owners from wallet service
- keeping owners cache in community_tokens/service and refresh every 10 minutes
Issue #10254
Fixes#10523
The problem was that the CreateChatView now uses an isolated Chat RootStore, since we can't be sure if the personal chat section will be loaded yet.
To fix that, I created a new store that is only for storing the properties needed for that new chat. That way we are sure that it is created and shared to necessary components.
The warning for not supported bigger than 99 for the account index
make sense only for standard derivation paths that we support.
Also added test case to story book for investigating the issue #10479
updates #10479
- do not hardcode width of child elements (impossible to propagate
setting the width from the toplevel/parent component)
- made both the community and non-community chat item look the same and
according to the Figma designs (including margins, scrollbar positions,
spacing etc)
- cleaned up some hardcoded values and dead code
Fixes#10469
Boris Melnik
Jonathan Rainville
Noelia
Khushboo Mehta
Lukáš Tinkl
Anthony Laibe
Sale Djenic
Igor Sirotin
Cuteivist
Alex Jbanca
Alexandra Betouni
Michał Cieślak
Stefan
Pascal Precht
Jakub Sokołowski
Anthony Laibe
Michal Iskierko
Anastasiya Semiankevich
Dario Gabriel Lipicar
Ivan Belyakov
Mikhail Rogachev
Mykhailo Prakhov
Patryk Osmaczko
mprakhov
MishkaRogachev