There are two fixes needed here.
1. Status-go fix for unknown primitive when signing the message
2. Fix for Paraswap pairing failure due to required namespaces mismatch
Needs: https://github.com/status-im/status-go/pull/5755
- add a secondary "loading" state (`loadingWithText`), that is show the
loading indicator next to the text
- simplify the StatusBaseButton layout (esp. handling the overall
opacity/visibility)
- add a QML test suite; the code was becoming too complex and adding a
simple boolean prop was getting "dangerous"
- port the SwapModal to use the new `loadingWithText` property
Fixes#15313
- make it possible to configure the locale of the validator
- use the correct default decimal point in AmountValidator
- update/add the relevant tests for AmountToSendNew
1. Hiding DApps button on not supported wallet account selection
2. Filtering DApps in connected dApps list based on account selection
closes: #15589closes: #15647
- format Big decimal numbers correctly according to the current locale;
some precisions loss is tolerated here for the display purposes
- fixes wrong decimal separators in some places and aligns with the
standard in terms of number of decimals, as everywhere else in the app
Fixes#15612Fixes#15790
- set the correct widths and elide mode
- fixup the visuals of the NetworkFilter combo box (to disable it w/o
making it look disabled)
- fix passing the connection status down to DAppCard
- This commit temporarily disables the MaxAmount button in the `SwapInputPanel` and `SendModal` components.
- The MaxAmount button will be reintroduced with the correct behavior in issue #15709 for the 2.31 release.
closes: #15710
The requirements are that we allow all available networks
to Wallet Connect
Also temporarily disable the tests that validate selection working
Closes: #15638
We have no easy way to check the protocol and provide a customized
error message. Therefore we generalizes the error message to network
not supported.
Closes: #15649
- when we arrive to a point when all input params are empty, disable the
middle Exchange button
- add QML test for the Exchange button enabled/disabled state
Fixes#15751
Add helper function to filter out dApps with sessions that don't
have any supported account in the available accounts list.
Use helper function to filter out dApps connected on other profiles
when listing dApps in the dApps list.
When disconnecting an app only disconnect sessions for the current
profile.
Closes: #14888, #15707
Also
- don't report error in case of status-go returning nil instead
of an empty array.
- fix misleading alias to AmountsArithmetic
- minor improvements requested in previous discussions
Updates: #15707
Also differentiate between l1 and l2 fees and check them against the
specific chain balance
Also
- Included tests for the new functionality
- Fixed some inconsistencies in handling types
Updates: #15552
In comparison to the previous version it provides simpler API
and better validation based on AmountValidator.
Old version will be removed after full integration of the new version.
Compute max fees for transaction related requests and display the
results to user.
Also:
- Add helper to convert from hex (backend) to decimal (frontend) values.
- Add helper to convert from float gwei to hex wei
- Update tests to accommodate for the new dependencies.
Sourcing of account balances is not included therefore the transaction is
allowed to go through even if the account balance is insufficient. An error
will be generated by the backend in this case.
Updates: #15192
- remove old popup and related components/adaptors
- simplify the API of the Sign/Approve modals to take pre-formatted
amounts as strings
- correct login/auth icon
- SB: make it possible to open the new secondary modals
- SB: fix the `fetchSuggestedRoutes` response handling, pass around the
`uuid` and inject it to the mocked suggested routes
- adjust SB pages and tests
Fixes#15443
* feat(WalletConnect): Implement sign request modal
1. Implementing sign request modal based on SignTransactionModalBase
2. Adding storybook page
3. Integrate it in the app
4. Removing DAppRequestModal
5. Update RoundImageWithBadge to preserve aspect ratio between badge and main image
* fix(WalletConnect): Remove unneeded properties from WalletConnectService API
Removing `selectedAccountAddress` and `loginType`. These properties are now passed through DAppsWorkflow API
* fix(WalletConnect): Removing unnecessary changes
- Created data transformation file called `WalletAccountsAdaptor` for `SendModal`. Now it contains the owned wallet accounts model data transformations.
- Added common formatting method for short chain ids to some utils and partially removed backend dependency.
Extend support for legacy `eth_sign` and `eth_signTypedData`
methods.
Keep the `eth_sign` using the legacy method for compatibility
Use the newly added status-go apis for a safer implementation
of signing typed data by providing chain validation.
Closes: #15361
- some minor visual fixes (padding & clear button color)
- make it always paste plain text, eventhough the base component has to
stay RichText
- use it in SendModal->RecipientView
- add a storybook page
- added QML tests
Fixes#15252
Changes:
1. Align dialog with Figma design
2. Add new components for round image with badge and connection status tag
3. Add tests
4. Dapps service will now receive wallet `RootStore` as input and reuse existing models with account balance and other necessary info for account selection and chain selection
5. Minor updates in stores
6. Minor updates in WC toast messages to display app domain instead of app url
- create a common base for "sign" transaction popups/modals:
`SignTransactionModalBase`
- add SwapSignModal, deriving from the above common modal base
- add it to StoryBook; integration TBD as part of a different followup
PR
- add QML tests
Fixes#14785
Fixes#15314
The problem is that we used the `name` property to know if we have an ENS name, but we actually set it to whatever is available, so we need to validate that it's an ENS name
- create new dedicated (asset) token selector component
- integrate it into `SwapInputPanel` and `SwapModal`
- add respective SB page and QML tests suite
Fixes#14783
This commit creates a new component NetworkSelectorView and it's implementation will replace the NetworkSelectionView
+ Adding the storybook page
+ Adding tests
This is the first step in refactoring the NetworkFilter, by cleaning the base component that handles the check states.
This component supports multiple configurations:
1. Single selection with or without radio button
2. Multiple selection with or without checkbox
3. Automatic handling of the check state. The component will change the check state based on user clicks
4. Manual handling of the check state. The component will not change the check state, but offers a toggled signal and expects the user to change the check state based on external flows
+ Fix minor bugs
The new account selector expects a generic account model. It will display all the account data if provided, including preferred chains, balance or asset balance. Otherwise it will display only the available data.
The account selector can receive an initial selection based on account address and will provide the current selected address and the current selected model item.
- Unify the account selector between communities and wallet
- Update the account selector to work with addresses instead of model indexes
- Adapt all components using the account selector or the account selection
- Move/reuse qml components involved in the account selector UI
- Remove nim logic used to handle index based account selection.
- Adding storybook page
TLDR: later this should form a basic building block for a new
TokenSelector picker component, potentially replacing the current
HoldingSelector* and TokenListView components (support for collectibles
TBD as part of https://github.com/status-im/status-desktop/issues/15121)
- create reusable `TokenSelectorAssetDelegate` and `TokenSelectorView`
- add corresponding SB page, showcasing the flow/integration and the
separation of concerns between the view, adaptor and delegate layers
- add QML testcase for TokenSelectorView
- don't display crypto symbol for token balances per chain tags
- update the stores and SB pages
- add some missing formatter functions to LocaleUtils and CurrenciesStore
Fixes#14716
Implement infrastructure and integration with status-go to support
general session requests
Supported methods:
- personal_sign
- eth_signTypedData_v4
depends on status-go change that exposes the signing methods
Also
- support hex or utf8 encoding for personal_sign
- format the typed data for display in the modal
Tests are disabled for now, as they are crashing on CI
Close: #14927
Trigger authentication with identity of the request
Track the authentication using the identity and allow only once
Add tests for the new functionality
Minor improvements around the code
Closes#15018
For start support showing sign message only
Support rejecting the request
Storybook integration
Add disabled tests for the main logic and sanity UI tests.
They crash on CI only and work locally on mac. Postponed finding out why
for now.
Closes: #14927
Abstract WalletConnectSDK to make it testable
Implement WC service pairing test
Bring back DAppsWorkflow tests back to life and add a pair modal test
Updates: #14927
- add new `showRadioButtons` and `showTitle` UI customization points
- adjust SB and expose all the existing modes, fix it to make it work
with multi selection
- integrate these new modes into SwapModal to align it with the Figma
design
Fixes#14780
- new panel created: `SwapInputPanel`
- some cleanups to the needed stores
- created a SB page demonstrating the use of 2 panels and the
`SwapExchangeButton`
- created QML tests
Fixes#14781
- Create row radiobutton component like the one defined in design
- It shall contain custom set of buttons
- It shall contain a Custom button that will be converted to an input
field
- Add the new component into a new storybook page
- Create necessary qml tests to cover the component logic
Fixes#14784
- created a new component (`ErrorTag`) based on the existing
`InformationTag`, suitable for displaying a row of icon (optional), text
and (optional) button in red/danger color
- add ErrorTagPage.qml to StoryBook
- add some basic QML tests
- InformationTag: make more properties customizable, use the same
`bgRadius` consistently
- StatusSmartIdenticon: some fixes for the MouseArea hover/click
behavior
Fixes#14792
Implement the initial Pairing user workflow and disconnect option for
the first session.
Also
- rename pairing modal accordingly (`PairWCModal.qml`) to make room for the proper
`ConnectDAppModal.qml`
- basic tests for service helpers
- update storybook to reflect the new user workflows
Closes#14607
Removed loading hidden groups from local settings and instead reload
them from the externally loaded settings.
Also move the local saving code from the controller to external,
therefore now it is implemented in storybook
Updates #14365
Add a specific state to the saveSettings action to update the model
by reloading the data.
The previous implementation was using the same save address which
doesn't update. Either in the past there was a side effect that made it
work or it was never working.
Closes#14365
Add a separation layer for save/load/clear to ManageTokensModel
so that we can save/load from external sources.
The separate layer is composed of JSON as protocol, a set of signals
and slots for interface. The implementation forwards data to current
QSettings for storybook and nim controllers for the app.
Updates #13313, #13312
Cuteivist
Seitseman
Alex Jbanca
Lukáš Tinkl
Sale Djenic
Khushboo Mehta
Roman Chornii
belalshehab
Stefan
Dario Gabriel Lipicar
Michał Cieślak
Alex Jbanca
Noelia
Jonathan Rainville