Changes in the Permissions design:
1. If the collectible is unique the amount input is disabled. 1 is auto-selected
2. Show `Max. 1` for unique tokens and empty string for other tokens
Changes in the Airdrop design:
1. Show `Max. 1` for unique tokens
- It adds info panel when control node is offline.
- It modifies UI texts when control node is offline.
- It updates storybook updating permissions model and allowing permission state changes.
NOTE: Only UI, no backend. There is 1 expected integration point: permissions model item `permissionState` role.
Closes#11769
This commit includes the following changes:
1. Request from backend the messages count in a specific interval as opposed to all messages timestamps in that interval.
2. Update the chart end date before refreshing the data
3. Fix metrics type parsing in community service
4. Fix a bug where the new incoming data was not processed by ChartJs without a hover event on the chart. The fix here is to manually request paint() on model changes.d
Issues found and not handled here:
1. On large communities the backend request can take 3 minutes to complete
2. CPU usage can easily go to 100% when switching chart tabs on large communities. All the requests are processed by the backend.
It improves workaround for QTBUG-87804 in StatusDropdown, to work
nicely whenever content is set via contentItem or not. The same
solution is added to StatusDialog.
Closes: #11768
- In case of `Owner` and `TMaster` token deployment failed, a `Retry` button must be shown in minted tokens pages and it will navigate to the `Edit page` the same way it's done by using `Retry` button inside the item selected.
- Updated storybook accordingly.
Closes#11613
- Added `buttonEnabled` property to `StatusInfoBoxPanel` so it can be set from outside.
- Fixed airdrop button enable condition in minting flow. It is enabled when minting state is completed and if the token properties are infinite supply or there are still remaining tokens to be airdropped.
- Updated storybook accordingly.
Fixes#11496
Bump Status GO to support session based activity requests
Transaction module was replaced by activity module,
this change removes the old code.
Details:
- Remove transaction.Item and use the DTO directly
- Replace the still using missing functionality
- Remove old way of fetching transactions in response to the history event
- Use activity filter to provide history for "recents" in Send.
Closes#11339
- remove padding and use margins so that the listview can span the whole
width while having the scrollbar neatly next to it
- make the section header both inline and floatable (which makes it
always visible, even when scrolled away)
- fix the special search results "section" to behave the same way
- sort the results by category and name
- expose the `allTokensMode` for easy testing with storybook
Closes#10201
- Settings/About now displays the `status-go` version, read from its
`VERSION` file
- use the actual app icon, to differentiate between prod/dev version
- make the version numbers clickable, taking the user to either the
release notes (prod) or the GH commit browser (dev)
- add "Is production" switch to the About page in storybook
Closes#11424
This change corrects legacy naming that was causing confusion.
Community invites are no longer sent to users. Instead, the community is
just shared. If a user is interested in joining this shared commmunity,
they must submit a request to join.
- display an info box when in wallet testnet mode with a CTA to disable
it (functionality enabled for production builds only)
- the CTA can be tested/seen via OverviewSettingsPanelPage storybook page
Closes#11468
- Added `storybook` support to change minted tokens model with Owner and TMaster tokens.
- Added new properties into the `tokenModel` model.
- Extended `CollectiblesView` to allow Owner and TMaster tokens representation.
- Updated `MintedTokensView` in order to display Owner and TMaster tokens.
- Added logic to `enable/disable` MINT and AIRDROP token depending on the owner / tmaster tokens deploy state.
- Added temp buttons in MINT and AIRDROP pages that keeps enabled the flows although owner and tmaster backend is not ready.
- Extended navigation from outsite to minting section, depending on user profile and owner and tmaster states.
- Hide footer options in case of owner token item visualized.
- Added retry flow.
Closes#11299
Adding the export control node popup. The popup is behind an authentication wall.
1. Create ExportControlNodePopup qml
2. Add the popup in storybook
3. Create authentication flow with qml callback to open the popup after authentication
4. Add the popup open action in Global.qml
- It creates a generic `TokenInfoPanel` that will be reused in different mint token views.
- It creates new `EditOwnerTokenView` and storybook page support.
- It adds new `EditOwnerTokenView` into the minting flow, linking sign transaction flow and adding needed method to the store to do the deployment.
Closes#11296
- Added start panel in tokens welcome page.
- Added start panel in airdrop welcome page.
- Updated e2e tests according to new requirements.
Closes#11284
1. Adding OverviewSettingsFooter.qml according to design
2. Adding the footer to storybook
3. Add the footer in the overview page
4. Remove the squish tests for the old footer
- It creates specific token artwork panel for owner token and token master token representation.
- It adds support to new component in storybook.
Closes#11294
- header buttions/title/subtitle simplified
- no need to use states
- no need to use internal `d` object to pass data between pages
- permissions list scroll position preserved when navigation back from
other views
- storybook: allow "back" navigation to cover whole flow in sb
- fix some regressions in permissions-related pages
improved
- management of header simplified, no states needed
- no need to use StackViewStates helper
- no need to use internal `d` object as a proxy to pass data between
pages
- StackView used as a base class
- clipping problems fixed (#11285)
- scrolling problems fixed (#11289)
- all flows working from the storybook
- header management simplified
Closes: #11285Closes: #11298
- Renamed main `CommunitiesPortal` folder to `Communities`.
- Created new `layouts` folder.
- Moved layout files from chat to communities.
- Created new `helpers` folder.
- Moved helpers files from chat to communities.
- Moved `controls/community` files from chat to communities `controls`.
- Moved `panels/communities` files from chat to communities `panels`.
- Moved `popups/community` files from chat to communities `popups`.
- Moved `views/community` files from chat to communities `views`.
- Moved `CommunityBanner` file from shared to `Communities/controls`. Only used in communities context.
- Moved `CommunitySettingsView` and `CommunityColumnView` files from chat to communities `views`.
- Moved `PermissionsStore.qml` file to `shared/stores`.
- Updated imports.
- Updated storybook.
Part of #6204
Fixes checking for duplicate token name in a case insensitive manner
Redo the `ModelUtils.contains(model, roleName, value, mode =
Qt.CaseSensitive)` in C++; more speed and add ability to search case in/
sensitive
Some more smaller fixes/speedups
Fixes#11204
- introduce StatusButton storybook page with controls to play around
with the its options and variants
- StatusBaseButton: make the content item horizontally centered by
default
- StatusBaseButton: remove `textAlignment` and fix `textFillWidth` for
the intended usage
- fixup usage of the 2 above options which were introduced merely as a
workaround, mostly in wallet + corresponding storybook pages
Fixes#10903
- Added assets model.
- Added no data text for assets tab.
- Added navigation from airdrop to mint specific tab.
- Updated `HoldingsDropdown` component to allow network information for assets.
- Removed `isCollectiblesOnly` option in `HoldingsDropdown`. No longer needed.
- Updated `storybook` to support airdrop assets testing.
Closes#11056
- Added support for selecting a specific `chainId` in `NetworkFilter.qml`.
- Added `storybook` use case for selecting specific `chainId` in single selection mode.
Part of #11030
- simplify StatusChatListAndCategories, and propagate the width
- set the correct width in StatusChatList's actions (using
`Layout.fillWidth: true`)
- add a width slider to the storybook page to be able experiment with
the whole component width
Fixes#11047
- Created `TokenObject` files and use them inside `CommunityNewTokenView` instead of plain properties.
- Updated `CommunityTokenView` to use `TokenObject` properties instead of plain properties.
- Updated store calls to use `TokenObject` properties instead of plain properties.
- Remote destruct properties renames.
- Airdrop navigation extended passing token type (asset or collectible).
- Updated `storybook` according to new changes.
- introduce 2 new bool properties: `requiresPermissions` and `locked`
- import the new icons
- add a respective storybook to play around with the StatusChatListItem
properties
Fixes#11012
- exchange the direct input with a calendar popup
- extend the validation of the range (so that from < to === true, etc)
- remove direct input components (Status[Base]DateInput.qml)
Fixes#10900
- It refactors `SettingsPageLayout`.
- It adds `retry mint` and `delete` options when deploy process fails.
- It renames `RemotelyDestructAlertPopup` to generic name `AlertPopup`.
- Added assets list UI.
- Added shape rectangle for empty lists.
- Added filter by asset / by collectible
- Updated storybook accordingly.
- Added flow to open token view depending on type
Closes#10625
- It updates `CommunityCollectibleView` to display minting failure state.
- It updates `CommunityMintedTokensView` to display minting failure state.
- It exposes subtitle color property in `CollectibleView`.
- It updates `storybook` with more options to display minting failure state.
Closes#10620
- Added property `remotelyDestructState` and `burnState` in `CommunityCollectibleView`.
- Added `fire` and `loading` icons while destruct/burn is in progress.
- Added short animation when destruct/burn process is completed.
- Renamed `Constants.DeployState` to `Constants.BackendProcessState`, more generic one that can be used for different processes.
- Updated `storybook` with new options to test animation.
Closes#10603
The warning for not supported bigger than 99 for the account index
make sense only for standard derivation paths that we support.
Also added test case to story book for investigating the issue #10479
updates #10479
- `StatusCommunityCard` updated with a new hearder component.
- `CommunitiesGridView` updated to use `CommunityPermissionsRow` component inside card.
- Added needed models.
- Updated storybook.
Pending backend integration: Part of task #10410
Major changes:
- Don't allow empty network selection. End up using the nim model
directly instead because of individual row changes issues
encountered with nim models
- Made the clone model a generic implementation to be used in other
places where we need to clone a model: ReceiveModal,
AddEditSavedAddressPopup
- Use cloned model as alternative to NetworksExtraStoreProxy in
ReceiveModal
- Added tristate support to our generic checkbox control
- UX improvements as per design
- Fix save address tests naming and zero address issue
- Various fixes
Notes:
- Failed to make NetworkSelectPopup follow ground-truth: show partially
checked as user intention until the network is selected in the
source model. Got stuck on nim models not being stable models and
report wrong entry change when reset. Tried sorting and only updating
changes without reset but it didn't work.
- Moved grouped property SingleSelectionInfo to its own file from
an inline component after finding out that it fails to load on Linux
with error "Cannot assign to property of unknown type: "*".".
It works on MacOS as expected
Closes: #10119
Implement the UI part of Profile/Settings/Showcase:
- Communities/Accounts/Collectibles/Assets tabs
- drag and drop of items between "hidden" and "in showcase" sections
- ability to set individual items' visibility
- persistency (showcase saved across restarts), not exposed yet due to
missing backend API
Closes#9936
The non-standard derivation path was not allowed to be entered so paths
with custom indexes were not allowed.
Also implemented warning for non-ethereum coin
Added more tests for the new specifications
Other minor improvements and fixes
Closes#10135
The enforcing of the derivation path editing rules is done in a structured
way by handling all the changes on the array of `Element` stored in
d.elements and then recomposing the HTML string to be displayed after
every change.
Main limitation is the workaround in `onTextChanged` that regenerates
the text in order to dismiss foreign characters introduced by pasting
which I couldn't find a way to disable without disabling also the ability
to copy content to clipboard.
Highlights:
- Implement DerivationPathInput control that intercepts the modifiable
keyboard events in order to edit the visible TextEdit.text while
respecting the requirements of the derivation path editing
- Implement a JS Controller that handles the logic of the
decomposing and recomposing the derivation path string
- Add anew StatusQ with the TextEdit basic look and feel to be used
in DerivationPathInput control without duplicating the style
- Allow passing modifiable events that are not generating characters in
order to allow copy to clipboard
- Disable add account when control is in error state
- Limit to maximum 5 elements in the derivation path
Testing:
- Integrate the control with StoryBook for a quick preview of the
control
- Add unit tests for the Controller basic functionality and regression
for the main control Item
- Removed forcing x64 architecture on apple arm64 hardware from the
storybook build configuration
Note: initially the implementation was suppose to be simple parse the
derivation path string edit elements and format it. However, I could not
find a quick way fix the circular dependency issue between editing the
text and reformatting it. The solution was to use a one way from the
structured data to the formatted string which complicates the
implementation logic.
Closes: #9890
Fixing https://github.com/status-im/status-desktop/issues/9766
The main change is that the model will now provide the image type, on top of the image source. The image type can be either icon or image. Icons will be coloured with the same colour as the text.
Fixing: https://github.com/status-im/status-desktop/issues/9763
Changes:
1. Use int to pass around the supply amount from one component to another
2. Transform the supply amount to localised string when it is displayed to the user.
TLDR;
- all links visible in settings/popup
- persistent order of items
- drag'n'drop to reorder
- editing/deleting in a new popup
- several links of the same type
Needs changes in nimqml (to expose QAIM::begin/endMoveRows), in
DOtherSide (to expose those to NIM), in status-go (to preserve the links
order and fully save them to DB)
Fixes#9777
- Refactored minting components store access, since some panels were accessing stores directly. Now `CommunitySettingsView` is the single place where stores are accessed.
- Renamed store `CommunitesStore` to `CommunityTokensStore` for handling minting / airdrop actions / request models.
- `NetworkFilter` refactored to prevent direct access to store inside the component.
Closes#9663
- the goal of this PR is to get some bsais UI building blocks done for
the followup PRs
- the order of showcase tabs now is:
Communities/Accounts/Collectibles/Assets
- there will be further changes to accomodate for different types of
backend models as those get developed (for other users' profiles)
Fixes#9664
So far CP components (views, panels) were accessing stores directly.
Now `CommunitySettingsView` is a single place where stores are accessed.
Other components no longer depend on stores.
Moreover:
- dedicated store `PermissionsStore` created for handling permissions
in a single, separated place
- storybook pages fixed
Closes: #9784
Community permissions model refers to channels by id instead of
taking/serving all details. UI fetches necessary metadata form
appropriate channels model.
Closes: #9588
Closing #9470
Adding Did You Know Splash Screen that will be shown when AppMain is completed.
The SplashScreen runs for 30 seconds and will randomly iterate through `fun messages` every 5 seconds.
- all remaining global popup components moved into a separate Popups
entity
- removed some static objects from the Global singleton (appMain,
pinnedMessagesPopup, communityProfilePopup, sounds); rationale:
singletons should not contain any state
- fixed support for popups in storybook
- fixed some warnings (most of them broke the popups in one way or the other)
- Updated initial dropdown view for assets and collectibles to directly show the list of corresponding elements.
- Updated assets and collectibles panel when an item is selected, according to new design.
- Updated collectibles logic when amount is 1.
- Added collectibles group item as part of the selectable's options.
- Updated `storybook` according to new changes.
- Created reusable `TokenItem` component.
- Updated `CommunityPermissionsHelpers`.
Closes#9043
- Logic related to operators removed.
- Dropdown `and/or` removed.
- Updated `PermissionItem` to display only the tag and not the operator.
- Updated `storybook` according to new changes.
Fixes#8500
1. Don't allow mention invalidation by altering mention with mouse or keyboard
2. Don't allow mention duplication on the same position
3. Clean mentions after text with mentions changes
4. Fix mention selection
5. Make sure mention is separated by text with valid separators (we're using only space)
6. Cursor will consider the mention as an object and will jump over it as it would be a single character (placing cursor inside leaves room for mention invalidation)
feat(CommunitySettings): Implement UI for`edit`, `duplicate` and `remove` actions in community permissions page
- Enabled `duplicate` action (mocked).
- Enabled `delete` action (mocked) and added / updated navigations in case all permissions are removed.
- Added delete confirmation popup.
- Enabled `edit` action (mocked) where changes are detected and the `dirty changes toast` appears properly.
Closes#8581
- Created page and added editor for specific page.
- Created needed mocked models.
- Added background in permission related pages to ensure correct dark mode visualization.
- Added `CommunityPermissionsSettingsPanel`.
- Created panel item editor and basic panel editor layout for `CommunityPermissionsSettingsPanelPage`. Still not linked to a model.
- Added mocked data for collectibles and tokens.
- Created `ChannelsModel` mocked data.
- Added edit / duplicate / remove signals logs.
- rework the way social links are displayed/editted; we now only allow to
enter a so called "handle" and then substitute that in the final URL
template
- move the "icon" model role to NIM backend
This has several advantages:
- we display only the "handle" and don't have to elide some long URL
- we won't let users enter random URLs into their profile and spoof the
viewing part into clicking it
Additionally, make the social link "button" clickable -> navigate to the
target URL, and make the tooltip behave as "usual" (on mouse hover).
The profile fetching view is part of the onboarding process. This view should be displayed on existing user onboarding flow, while the profile is being fetched in the backend.
It has 3 states:
1. Fetching in progress
2. Fetching completed
3. Fetching error
chore(@storybook): add language & currency settings view to storybook
chore(@storybook): add language & currency settings view to storybook
fix storybook menu
remove qsTr
This adds the ProfileDialogView to storybook pages
For now, there's just one control to switch between own profile and
another profile; more to come in later PRs.
The mocked global objects (mainModuleInst and globalUtilsInst) are
injected via QML
Fixes: #7820
In comparison to generic page-wise hot reloading, this technique
requires using dedicated component within a storybook page but
provides greater flexibility e.g. preserving component state across
source reloads.
Closes: #7975
Moreover:
- load asynchronously switch fixed
- storybook refactored to rely on build-in components only
- some explicit sizes/spacings removed
- some bigger components split into smaller
Closes: #7898
Alexandra Betouni
Alex Jbanca
Lukáš Tinkl
Khushboo Mehta
Noelia
Patryk Osmaczko
Michał Cieślak
Dario Gabriel Lipicar
Igor Sirotin
Mikhail Rogachev
Emil Sawicki
Anthony Laibe
Stefan
MishkaRogachev
Alexandra Betouni
Sale Djenic
alexjba
Jonathan Rainville
Iuri Matias