Replaced basic image selector to `EditCroppedImagePanel` component in mint token workflow.
Extended `NoImageUploadedPanel` to allow custom texts and some sizing improvements.
UI part of #10317
- Updated expected model roles (removed `selfDestruct` and `selfDestructAmount`)
- Self destruct tokens list management is now done inside `SelfDestructPopup).
- Store receives a js array with {walletAddress, amount} roles.
- replace qml owners model with Nim one
- get token owners from wallet service
- keeping owners cache in community_tokens/service and refresh every 10 minutes
Issue #10254
Fixes#10523
The problem was that the CreateChatView now uses an isolated Chat RootStore, since we can't be sure if the personal chat section will be loaded yet.
To fix that, I created a new store that is only for storing the properties needed for that new chat. That way we are sure that it is created and shared to necessary components.
The warning for not supported bigger than 99 for the account index
make sense only for standard derivation paths that we support.
Also added test case to story book for investigating the issue #10479
updates #10479
- do not hardcode width of child elements (impossible to propagate
setting the width from the toplevel/parent component)
- made both the community and non-community chat item look the same and
according to the Figma designs (including margins, scrollbar positions,
spacing etc)
- cleaned up some hardcoded values and dead code
Fixes#10469
- CommunitiesPortalLayout was the last piece still unconditionally loaded
on startup -> fixed
- extract the `communitiesStore` into AppMain to be able to reuse it from
other components
- move the import/create community dialogs to `Popups` (reusability)
- cleanup and remove some dead code, fix warnings
Iterates #6204
Also:
test(suite_communities): Fixed community related tests
- A new intermediate popup is now displayed when user clicks on `Create New Community` button from `Community Portal`.
- Reformulated `tst_communityPermissions` since now it is a default option without the need of activating it from experimental feature's section.
Closes#10115
the StatusChatInput (among other things) was disabled due to wrong
`activeChatType` being passed down to `ChatContentView` which does all
sorts of checks whether we are allowed to chat with that contact
The `root.activeChatType` no longer reflects the chat that we are going
to activate (probably due to the extensive use of `Loader`s)
(plus remove some dead code)
Fixes: #10463
disable retranslation, display a confirmation dialog and apply the
language change after app restart
rationale: the way the retranslation works internally is that it force
reevaluation of _all_ QML bindings which:
- might lead to crashes (immediately or later)
- lots of warnings printed to console, some bindings can get broken as a result
- not all UI is correctly retranslated on the fly (we have lots of places
where we assign the text imperatively via JS code), so these wouldn't
appear translated before app restart anyway
Fixes#7823
- `StatusCommunityCard` updated with a new hearder component.
- `CommunitiesGridView` updated to use `CommunityPermissionsRow` component inside card.
- Added needed models.
- Updated storybook.
Pending backend integration: Part of task #10410
for everything that's not a user interface element, esp. for static/big
images or chat/message elements which get served from locally anyway from
status-go
Iterates #10339
- move the add/edit FAB icon to the topright corner as designed
- prepare UI changes for being able to delete banner/logo (missing impl
in status-go)
Fixes: #9680
Fixes#10384
The problem was that doing the sort inside the insertRows messed up the model.
I removed it and it fixed the issues. However, it created an other issue with ordering.
The problem this time is that when populating the model at the start, we do not get the chats in order, so calculating the right position to insert a chat is difficult.
Instead, I use a setData function to just put all the chats in the items list, sort it and call it done, using the resetModel function.
I also did some clean ups.
Please note that this solution serves as a temporary workaround and
comes with variety of limitations, particulary concerning the chat
input state. For instance, the reply area is not retained when switching
between chats.
Ideally the root cause, which is the high memory consumption of both
`StatusChatInput` and `MessageContextMenuView`, should be fixed. Once
this issue is addressed, the current workaround can be reverted.
fixes: #10378
Id removed from StatusBaseText used in default contentItem, what was
causing that default contentItem was instantiated even when overridden
by user. Radius and cursorShape properties exposed.
- expose "isEnsVerified" as model role
- fix returning "ensName" when the user is not ensVerified
- react to nickname updates correctly
- fix sorting in the user/member list view
the contact details are fetched imperatively in these popups (not via
model updates), so we need to setup a signal to be able to react to those
changes
Major changes:
- Don't allow empty network selection. End up using the nim model
directly instead because of individual row changes issues
encountered with nim models
- Made the clone model a generic implementation to be used in other
places where we need to clone a model: ReceiveModal,
AddEditSavedAddressPopup
- Use cloned model as alternative to NetworksExtraStoreProxy in
ReceiveModal
- Added tristate support to our generic checkbox control
- UX improvements as per design
- Fix save address tests naming and zero address issue
- Various fixes
Notes:
- Failed to make NetworkSelectPopup follow ground-truth: show partially
checked as user intention until the network is selected in the
source model. Got stuck on nim models not being stable models and
report wrong entry change when reset. Tried sorting and only updating
changes without reset but it didn't work.
- Moved grouped property SingleSelectionInfo to its own file from
an inline component after finding out that it fails to load on Linux
with error "Cannot assign to property of unknown type: "*".".
It works on MacOS as expected
Closes: #10119
It enables navigation from mint token page to airdrop page selecting a specific collectible to be airdropped.
It is now used `symbol` property as the identifier for a collectible but will be needed to update it to `key` once this key property is build in backend by hash(chainId + contractAddress).
Closes#10047
Part of #3364
To make the drag and drop reorder work correctly on channels, we needed to change the model again so that it was sorted in the model itself.
That is because the drag and drop gives us the value of the position it is dropped to as a single list, so dragging the second item of the second category would mean from position 5 to position to position 4, but what the backend wants is moving the item 2 to position 1.
Sorting the model enables us to get the category that is the parent of that position and call the service with the right positions and id.
It also enables us to reorder the channel in and out of the category.
See the module code to see how the calculation is done with an explanatory comment.
The model needed some changes to support that. Some of the function where changed from dataChange calls to resetModel calls, since we need to re-sort the model.
I tried using beginMove, but it would crash. Maybe there is a bug in NimQML or I used it badly, I'm not sure.
Lazily load chat and community sections but do not unload them,
otherwise all temporary data such as scroll position, text input,
cursor position, etc., would vanish
iterates: #10286
- hide the market and other stuff that can't be used while offline
- recent stickers and already installed packs can still be used; they
will be sent when we return online
- when we return online, reload the views instead of closing the popup
- fix an evil NIM typo that prevented reloading the already installed
sticker packs
- remove the NIM parts that haven't been ported to the async nature; just
`loadStickers()` on the QMl side does the trick
the button to (un)install would be either greyed out or result in a crash:
- we were passing the popup a wrong store (w/o networkConnectionStore)
- the condition to `greyedOut` was inverted
fixes the currently selected sticker pack not being highlighted in the
popup footer
The strict equality operator would no longer yield true here:
```
property int selectedPackId
...
selected: stickerPackListView.selectedPackId === packId
```
the AC popup was being recreated on every click and never destroyed,
leading to:
- memory leaks
- slow operation on opening (it's not trivial to create)
Now we keep a reference the the created popup object, thus making it
faster to appear on every (second) click. It gets destroyed via its
parent at the application shutdown
the Popup has to be modal and the overlay should catch/eat all the mouse
events to prevent them from propagating to the contents behind the popup
Fixes#9838
Implementation of rounded corner line has been changed from Canvas to
plain Rectangle, fixing problem with Canvas not repainting when
dependent properties are changed.
Closes: #9668
Khushboo Mehta
Alexandra Betouni
Jonathan Rainville
Cuteivist
Noelia
Dario Gabriel Lipicar
Mikhail Rogachev
Sale Djenic
Michał Cieślak
Anthony Laibe
Michal Iskierko
mprakhov
Alex Jbanca
Igor Sirotin
Anastasiya S
Boris Melnik
Vladimir Druzhinin
Patryk Osmaczko
Stefan
Lukáš Tinkl
MishkaRogachev