After a LOT of work from @jrainville bisecting the release branch he
identified the issue to be this commit:
https://github.com/status-im/status-desktop/commit/dad8e453
ci: bump client build retries to 20
Which actually was poorly squashed by @iurimatias and contains the
commit that also adds the retries in the first place:
https://github.com/status-im/status-desktop/commit/a5ba2537
ci: retry nim_status_client build 3 times
The reason why that's an issue is because normally it was caled by `make
tgz-linux` target which included this setting:
```
override RESOURCES_LAYOUT := $(PRODUCTION_PARAMETERS)
```
Which caused `NIM_PARAMS` to use `-d:development` instead of `-d:production`.
The result was the app trying to write config file changes to the read-only
filesystem of the AppImage.
Resolves: https://github.com/status-im/status-desktop/issues/11295
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Ubuntu 18.04 LTS support has ended on the 31st of May 2023. It's about
time we upgraded to 20.04, which uses Glibc `2.31` instead of `2.27`.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This is a temporary stop-gap fix for a known linux build issue:
https://github.com/status-im/infra-ci/issues/88
Since currently this issue is very hard to reproduce and there is no
good solution in sight this should minimize the pain caused by it.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This way we prevent situation in which a developer or QA engineer runs a
custom job with adjusted parameters, and then all following jobs use
those modified parameters implicitly. The more sane behavior is to
always revert to defaults for PR builds, but remember last used
parameters for non-PR builds.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Useful for tracking down which commit introduced a breaking change.
I'm lowering `maxConcurrentTotal` limit for e2e parallel build since the
release builds on `ci.infra.status.im` do not share the same throttling
limits across Jenkins instances, so we can hit a licenses usage limit.
Also increasing number of builds to keep to 30.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
The symlinks are temporary to avoid issues in PRs that won't be rebased
right away. We can remove them later.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
We're using a base ubuntu:18.04 Docker image and install Qt5.15.2 on top using aqt installer and linuxdeplyqt.
Upgrade of ubuntu_build_setup.sh is left to a separate PR due to Squish being tied to old Qt.
Fixes#9210
Adds the `TEST_ENVIRONMENT` that stops banners from showing and touch id to be activated (needs to be tested by someone on Mac).
Also improves the waiting time on verifying screens. Will undo that change if it becomes flaky.
To make sure your local tests still work well and hide the banner as well, make sure to put `TEST_ENVIRONMENT=1` in the suite settings' env vars
Otherwise we get failures when notarizing the app:
```json
{
"message": "Unable to upload your app for notarization.",
"userInfo": {
"NSLocalizedDescription": "Unable to upload your app for notarization.",
"NSLocalizedFailureReason": "--team-id DTX7Z4U3YA is not valid for the user name specified. Use --list-providers."
},
"code": -1027
}
```
Related: https://github.com/status-im/status-mobile/pull/14411
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Please do not run 20 different things in a single stage.
It makes debugging much harder than it needs to be, since now you can
see at a glance the startup of which container fails easily.
Changes:
- Starting of Ganache and Nim-Waku containers extracted to separate stages
- Cleanup of containers moved to `cleanup` step after tests are executed
- Many variables moved to `enrivonment` section for job and some stages
- The `throttle` effect narrowed down just to the `Tests` stage and not whole job
- RPC API is used to get the Multiaddress of Nim-Waku node instead of hardcoding key
- Removed no longer necessary `status-go` history node related files
- `Jenkinsfile.uitests` was renamed to `Jenkinsfile.e2e` to match CI job names
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Possible fix for slow upload speeds and failures caused by most probably
hitting per-bucket rate limits of DigitalOcean:
>- 500 total operations per second to any individual bucket.
>- 300 combined PUT, POST, COPY, DELETE, and LIST operations per second
> to any individual Space. We may further limit LIST operations if
> necessary under periods of high load.
https://docs.digitalocean.com/products/spaces/details/limits/#rate-limits
Depends on: https://github.com/status-im/status-jenkins-lib/pull/52
Signed-off-by: Jakub Sokołowski <jakub@status.im>
It needs to be separate script, because once the submodules are broken
and the `variables.mk` file is not available from `nimbus-build-system`
then we cannot even call `make clean-git` successfully because it will
be caught by the `if` clause that checks for `variables.mk`.
Possible fix for issues with submodules not being updated in some
windows release builds.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This was added to fix some build issues to Linux:
https://github.com/status-im/status-desktop/pull/8233
But other 2 platforms also have had the cleanup stage change which could
have cause these submodules update issues.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This is a continuation of attempts to fix provlems with Windows CI hosts
getting into a broken state due to `.git` directory becoming a file for
random submodules for unknown reason.
Instead of relying on Jenkins functionality of `cleanWs()` function
provided by the [Workspace Cleanup Plugin](https://plugins.jenkins.io/ws-cleanup)
we use Git which should be more reliable, and possibly also speed up the
initial checkout of the repo and submodules.
A nice side-effect is that the repo checkout on all builds after the first
one takes ~1 minute instead of ~5 minutes.
Previous issues:
- https://github.com/status-im/status-desktop/pull/7968
- https://github.com/status-im/status-desktop/pull/8046
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This is a continuation of a fix done in:
https://github.com/status-im/status-desktop/pull/7968
This adds `deleteDirs` option to delete the whole workspace:
>When deferred wipeout is disabled, the old implementation of
>filesystem content deletion is used. If you want the same
>behavior as with deferred wipeout, you have to set the plugin
>attribute `deleteDirs` to true as well.
https://github.com/jenkinsci/ws-cleanup-plugin#deferred-wipeout
Because otherwise the `vendor` folder remains and causes
issues when `.git` is a file.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
A potential partial fix found for an issue found in:
https://github.com/status-im/status-desktop/pull/7789
Where an incomplete broken checkout of a `vendor` module which crated a
`.git` file instead of a directory in `vendor/nimPNG` caused the error:
```
$ git submodule update --init --recursive vendor/nimPNG
fatal: Needed a single revision
Unable to find current revision in submodule path '../nimPNG'
```
Which then was not correctly cleaned up and in turn caused error:
```
org.jenkinsci.plugins.workflow.steps.MissingContextVariableException: Required context class hudson.FilePath is missing
Perhaps you forgot to surround the code with a step that provides this, such as: node, dockerNode
...
```
The last known successful CI build for that PR showed in logs:
```
00:05:13 [WS-CLEANUP] Deleting project workspace...
00:05:13 [WS-CLEANUP] Deferred wipeout is used...
00:05:13 [WS-CLEANUP] done
```
Which means the `Workspace Cleanup` plugin uses the `Resource Disposer`
plugin to wipe the workspaace in the background, which could potentially fail:
https://plugins.jenkins.io/ws-cleanup/#plugin-content-deferred-wipeout
Signed-off-by: Jakub Sokołowski <jakub@status.im>
- Reviewed `suite_messaging/tst_ChatFlow` feature: Cleanup of duplicated steps and separation of action / validation applied.
- Reviewed `suite_messaging/tst_groupChat` feature.
- Added new tag to `Jenkins` file: `relyon-mailserver`.
- Added new `StartupSteps` class to manage init / startup static methods outside bdd steps. It can be used as a util in `hooks` and `steps`.
Closes#7931
By using `s3cmd` through PowerShell instead of Git Bash we improve
upload speeds on Windows slightly, as described here:
https://github.com/status-im/infra-ci/issues/40
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Fix BigInt compilation on linux
Remove c++20 optimization for NamedType
Add assert for failing getChats that was providing an easy to miss warning
Enable linux CI build
Don't run tests. They fail to run in docker with
"malloc_consolidate(): invalid chunk size", probably due to status-go
Contains minimal account creation and login
Considerations:
- migrated status-go wrapper and login code from the fix/cpp-structure (241eec)
- Minimal refactoring and changes at the moment. Expect further refactoring
follow up to reach the desired state.
- Fix missing keychain initialization
- Fix accounts DB initialization call done by startup -> Controller.openedAccounts -> status-go.OpenAccounts calls
- Small refactoring and todos for other steps
- fix SignalsManager
- fix async access to dereferenced status-go memory from SignalsManager
- fix SignalsManager not starting when registering
- finish dev end to end test for create account and login
- small improvements and added TODOs for future work
- add onboarding test helpers and start messaging test
- Refactoring towards Login UI integration
Closes: #5909Closes: #6028
Linux dockerized build and AppDir generation for compilation errors
Also added AppImage TODOs, basic setup for MacOS and Windows but they
still need work to have at least validation running
Temporary disable CPP windows/mac until limitations are
addressed in a follow up commit
Extra: add build configuration fixes for rest of the platforms
closes: #5998
For some release builds the notarization step fails because Apple
backend takes too long to return results. But the timeout triggered is
the Jenkins job timeout and no the notarization timeout.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Upgrade of Jenkins to `2.343` has introduced a security fix that breaks
caching plugin when it's configured to store cache on Master host:
https://issues.jenkins.io/browse/JENKINS-67173
Sine the [Caching plugin](https://plugins.jenkins.io/jobcacher/) hasn't
been upgraded in 5 years the only good temporary workaround is just drop
caching of dependencies like Nim compiler entirely.
In the future we can try some other caching methods.
Related: https://github.com/status-im/nimbus-eth2/pull/3594
Signed-off-by: Jakub Sokołowski <jakub@status.im>
It appears this was some leftover from ancient times and wasn't being used.
On the other hand the `RELEASE` environment variable controls if Nim builds
of the client binary include debug symbols:
ba7a6d5d34/Makefile (L177-L184)
The shorthand `?:` symbol means that if this is changed for a given job it stays changed.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Qt provides support for various input methods through plugins.
Since the fcitx plugin is not delivered with Qt, it needs to be
built and deployed by us.
Fixes: #4436
Jakub Sokołowski
Lukáš Tinkl
Igor Sirotin
Jonathan Rainville
Noelia
Anthony Laibe
Alex Jbanca
Patryk Osmaczko
Richard Ramos
Stefan
Michele Balistreri