- reduce the duplication by moving the controllers (1 per type) to the
toplevel stores
- make sure the internal properties stay in sync between save/load now
that we have just 1 common controller
- fix navigating to the Hidden section from the toast
- finish impl of hiding the token from FirstTokenReceivedPopup
put the respective controller instances into WalletAssetsStore and
CollectiblesStore, so that they can be accessed from other places, like
the SendModal or some popups
Iterates #13293
It provides visual alignments to the current design and also
significantly improves performance because ListView components
are not "unrolled" causing instantiation of too many delegates.
Closes: #12703Closes: #13043
Now the header don't have to be reparented manually. Everything
is done internally in the component. Additionally the usage
in CollectiblesView is adjusted to the change.
- add new Hidden tab/section to Settings/Wallet/Manage tokens page and
storybook
- extract the controller(s) to ManageTokensView.qml to share them across
the tabs
- updated the grouped UI delegate
- adjust the tests
Fixes#13201Fixes#13188
- Added new role into ephemeral_notification_model: image.
- Added new view API to display ephemeral notifications with image and action.
- Added support to display asset or collectible image in a toast with different shape (circle or square).
- Default values assigned to the new parameters added in `CommunityTokensStore` meanwhile backend is not ready.
- Created page for `StatusToastMessage` in `storybook`.
Closes#13039
It's build on top DoubleFlickable, managing two Flickables in an
effective way. It adds specific behavior of foldable and always visible
section headers.
Closes: feat/issue-13193
Proxy decorating source mode with additional method move(from, to, count)
similar to that available in ListModel. The custom order is stored within
a proxy, not altering the original model. May be useful whenever UI needs
to allow user to set custom order. Temporary state can be held in the
proxy, and send to the backend when changes are accepted.
Closes: #12686
... under Settings/Wallet/Manage Tokens
- rename Tokens List tab to Advanced tab
- introduce a new `CurrencyAmountInput` component, backed by
`FormattedDoubleProperty` C++ class (plus the respective SB page)
- use `FastExpressionFoo` for the collectibles views as well
Fixes#12611Fixes#13040
WritableProxyModel is a QAbstractProxyModel that allows you to modify the data without modifying the source model.
It is useful for implementing a "dirty" state for a model, where you can modify the data and then commit the changes
to the source model.
Supported features (reimplemented):
- setData
- setItemData
- removeRows
- insertRows
- moveRows (TODO)
- toVariantMap
- to be continued...
.. to filter by community or collection name
- make the HistoryView own filter button look like the other combos
- fix some cosmetic issues for StatusCombo in small/secondary mode
- fix StatusBaseInput bg color in dark mode (was invisible)
- update CollectiblesViewPage with options to include regular and/or
community collectibles
Fixes#12969Fixes#12948
- add the sort combobox to assets/collectibles main wallet view pages
- preserve the current view settings
- add the possibility to navigate/drill down into wallet settings
(sub)subsection
- some other minor changes/fixes
Note: currently assets can't be sorted by "1W change" and collectibles
by "Date added" due to missing backend for these
Fixes#12517Fixes#12518
- Open wallet connect modal when the application is opened from a
deep link
- Add test entry that opens wallet connect modal with mocked
StatusDesktop app that can be used for testing
- Add tests
Closes#12641
turns out the model from the comminitiesModule doesn't contain the
members; use the sectionModel (as in all other places) instead which
already has the correct info
additionally, fix the InviteFriendsToCommunityPopup display, it appeared
empty all the time
Fixes#12967
- update the CollectiblesView.qml view and delegates according to the
latest design
- add CollectiblesView to Storybook
- add new section for Community Collectibles
- (re)use the community badge with tooltip and link action to take the
user to the respective community
- add Community Collectibles info icon + popup
- create context menu for token delegates with actions
(Send/Receive/Manage tokens/Hide)
- add confirmation popups when hiding a single or all community tokens
- emit a toast bubble after hiding the token(s)
- fix eliding the community name inside ManageTokensCommunityTag
- some smaller fixes/cleanups
Fixes#12519
Requires the specific status-go changes that brings WCChangePairingState
Process delete session and update internal pairing history state
Updated testing while fighting for the issue of not deleting the session
Found out that the client requests a different topic in the delete
session request.
Also:
- update debugging UX to support session events
- update storybook to support mocking session events
- fix go test utility to account for refactoring
Updates #12858
- update the AssetsView.qml view and delegates according to the latest
design
- add AssetsView to Storybook
- add new section for Community Assets
- (re)use the community badge with tooltip and link action to take the
user to the respective community
- add Community Assets info icon + popup
- create context menu for token delegates with actions
(Send/Receive/Manage tokens/Hide)
- add confirmation popups when hiding a single or all community tokens
- emit a toast bubble after hiding the token(s)
- plus related controller/backend methods for handling the
settings-related actions
- some smaller fixes/cleanups
Fixes#12369Fixes#12372
This is required to control the resource consumption in case of no
usage of wallet connect
Hence we load the WebEngineView only if we have active pairings and
such that SDK events are expected from the paired dapps.
Also:
- Moved the generic WebEngineView communication bridge to StatusQ
- Added basic tests for WebEngineLoader
- Add a way to know when wallet is loaded (`walletReady`)
- Add storybook support for mock of nim sections as context properties
Updates: #12639
- It adds link to the corresponding tokens model in `EditCommunityTokenView`.
- It adds validation for `name` and `symbol`.
- It updates `storybook accordingly.`
Closes#12365
- display a customized floating bubble to save/apply the settings
- display a toast message on Apply with an action to jump to Wallet main
page
- add home/end/pgup/pgdown keyboard shortcuts to StatusScrollView to be
able to navigate more easily in long list views
- some smaller fixes and cleanups in wallet and settings related views
Fixes https://github.com/status-im/status-desktop/issues/12762
- implements a QML panel to organize collectibles
- factors out the delegates to separate files to be reusable with the
Assets tab
- adds QML tests to assess the UI functionality (move, show/hide, save/load)
- does not cover the problematic "Arrange by collection" switch (TBD
later)
Fixes: https://github.com/status-im/status-desktop/issues/12379
Bump status-go that brings the sign APIs support for send transaction
and personal sign
Extend SDK
- simple SDK event handling in QML
- support session request response APIs
- pairing management
Closes#12637
Implement Controller to forward requests between status-go and SDK
implementation in QML.
Other changes:
- Source Wallet Connect projectId from env vars
- Mock controller in storybook
Updates #12551
- implements the UI component to manage regular & community tokens
(drag'n'drop or context menu to reorder, show/hide, group by community)
- implements a custom C++ QAIM model which acts as a fake proxy model
for the above QML panel (internally it does all the
sorting/grouping/hiding and preserves the custom sort order)
- adds and corrects support for cascading submenus in StatusAction, and
StatusMenu[Item]
- adds support for mirrored (horizontally flipped) StatusSwitch
- adds a new SortOrderComboBox.qml (this was being used in the first
Figma version, can be ignored now, will be used by the main wallet view
later)
- some minor fixes and cleanups in the used components
Iterates #12377Closes#12587
Setting signer logic and computing fees.
AC messages for different transfer ownership states.
Declining ownership logic.
Added `CommunityTokensStore.qml` stub.
Removed deprecated property.
Issue #11964
- It created all possible AC notification types and notification component for transfer ownership flow.
- It adds `storybook` support for the new component.
- It adds call from activity center to finalise ownership popup.
Part of #12175
a
It allows transforming model, including submodels outside of the view
component consuming the model. Thanks to that now there is no need
to create proxies for submodels in view's delegate. It can be done
earlies, on the level of the main view.
Closes: #12630
- It creates new component `SupportedTokensListsPanel`.
- It updates tokens list tab content with the expected one.
- It creates new component `TokenListPopup`.
- It adds support to new created components in `storybook`.
Closes#12374
Implement a prototype of integrating [WalletConnect Web SDK]()
- integrate WalletConnect Web SDK using Node.js and packing it using
[webpack](https://webpack.js.org/guides/getting-started/)
- this way, we achieve the same versioning strategy for the SDK
- add WalletConnectSDK view
- it is used to load the web SDK via a WebView (validated working on
Mac and Windows)
- add new app dependency of WebView QT
- also update vendor packages `Dotherside` and `nimqml` to add
required WebView::initialize API used to initialize the WebView
integration at the app start
- add WalletConnectPage to Storybook for quick prototyping
- Also add dependency for WebView Qt lib
- index.js is the wrapper used to provide a simple stateful interface
with the WC SDK
- Entry in ui/generate-rcc.go ensures the node_modules cache is excluded
from the resource file
Notes:
- Added `com.apple.security.cs.allow-jit` entitlement when signing the
app package. This allows Execution of JIT-compiled Code Entitlement
required by the fast-path of the JavaScriptCore framework on MacOS
platforms.
- Keep some debugging entries expected to help debugging Linux package
- Removed outdated `DerivationPathInputRegressionTests` qml test
Closes#12301
* feat(StatusQ): Adding numberToLocaleStringInCompactForm function to LocaleUtils
This function will format the number in a compact form
E.g: 1000 -> 1K; 1000000 -> 1M; 1100000 -> 1.1M
+ adding tests
fix(statusQ): Update numberToLocaleStringInCompactForm to return the locale number when greter than 999T
fix(StatusQ): extend the test_numberToLocaleStringInCompactForm with new data
* feat(LinkPreviews): Update the link preview area in StatusChatInput to use the new model
Changes:
1. Create a new component `LinkPreviewMiniCardDelegate.qml` that filters the model data to properly fill the link preview card with the needed data based on the preview type
2. Update storybook pages
3. Small updates to LinkPreviewMiniCard
* feat(LinkPreviews): Update the link previews in message history to use the new backend
Changes:
1. Create delegate items for LinkPreviewCard and gif link preview to clean the LinksMessageView component and filter the model data based on the preview type
2. Remove UserProfileCard and reuse the LinkPreviewCard to display contacts link previews
3. Update LinkPreviewCard so that it can accommodate status link previews (communities, channels, contacts). The generic properties (title, description, footer) have been dropped and replaced with specialised properties for each preview type.
4. Fix LinkPreviewCard layout to better accommodate different content variants (missing properties, long/short title, missing description, missing icon)
5. Fixing the link preview context menu and click actions
fix: Move inline components to separate files
Fixing the linux builds using Qt 5.15.2 affected by this bug:
https://bugreports.qt.io/browse/QTBUG-89180
* fix: Align LinkPreviewMiniCard implementation with LinkPreviewCard and remove state based model filtering
The link preview model can be filtered, but the hyperlink detection needs an unfiltered model to properly highlight all URLs. This brought in the need to separate the urls model and the link previews model.
Adds target to run a storybook itself (run-storybook) and also
target to run all tests from storybook directory (run-storybook-tests):
- unit tests for storybook itself
- unit tests for the app using the same stubs mechanism (in offscreen
mode)
- PagesValidator
Tests are run via ctest.
Closes: #12448
Updating the `Undo` test that compares the `Undo` done in StatusChatInput with a standard TextEdit component.
Undo/Redo feature was changed by https://github.com/status-im/status-desktop/pull/12262. Now we're using a custom undo/redo logic and the undo is more granular as opposed to TextEdit.
This commit adds the link preview settings card in the chat input area and connects the settings to the controller.
Not included in this commit: Backend for the preserving the settings, syncing the settings and enforcing the settings on the backend side.
Whenever an url is detected in the chat input area, the link preview settings card is presented. This card enables the user to choose one of the following options:
1. `Show for this message` - All the link previews in the current message will be loaded without asking again. The current message can be defined as the message currently typed/pasted in the chat input. Deleting or sending the current content is resetting this setting and the link preview settings card will be presented again when a new url is detected.
2. `Always show previews` - All the link previews will be loaded automatically. The link preview settings card will not be presented again (in the current state, this settings is enabled for the lifetime of the controller. This will change once the settings are preserved and synced)
3. `Never show previews` - No link preview will be loaded. Same as the `Always show previews` option, this will be preserved for the lifetime of the controller for now.
4. Dismiss (x button) - The link preview settings card will be dismissed. It will be loaded again when a new link preview is detected
The same options can be loaded as a context menu on the link preview card.
Changes:
1. Adding `LinkPreviewSettingsCard`
2. Adding the settings context menu to `LinkPreviewSettingsCard` and `LinkPreviewMiniCard`
3. Connect settings events to the nim controller
4. Adding the controller logic for settings change
5. Adding the link preview dismiss settings flag to the preserverd properties and use it as a condition to load the settings.
6. Adding/Updating corresponding storybook pages
This component is a wrapper for LinkPreviewMiniCard and StatusChatInputImageArea. The purpose of this component is to arrange the cards in a row layout and provide scrolling behaviour. This component also has an opacity mask that will provide a fade out appearance when the items are scrolled out of view.
+ adding storybook page
+ integrate ChatInputLinksPreviewArea in StatusChatInput
Adding LinkPreviewMiniCard component based on Figma designs. This component is similar to LinkPreviewCard, but has less info and a different format.
There is also some additional functionality attached to this card: close button, reload button and hovered state. The LinkPreviewMiniCard can have multiple states, based on content type and loading state.
+ Adding storybook page
Figma design: https://www.figma.com/file/Mr3rqxxgKJ2zMQ06UAKiWL/💬-Chat⎜Desktop?type=design&node-id=22341-184809&mode=design&t=151TjdzkzI7flR4P-0
* feat(Communities): Introduce pending states for kick, ban and unban actions
Close#11795
* feat(Communities): Show bannedMembers pending states on the UI
* feat(Communities:) make kick, ban and unban methods async
* feat(Communities): add signal about community membership status change
* fix(Communities): move membership managment to to the appropriate model
* chore: review fixes
- Button from community column.
- Button from community overview.
- Updated storybook pages (settings overview related) according to new components requirements.
Part of #12174
which can disable or launch editting of the shard index for a given
community
- integrate it into community settings
- add a dedicated storybook page and make it also available from
EditSettingsPanelPage
Needed for https://github.com/status-im/status-desktop/issues/12197
which can configure and enable the shard index for a given community
- integrate it into community settings
- add a dedicated storybook page and make it also available from
EditSettingsPanelPage
Needed for https://github.com/status-im/status-desktop/issues/12197
It opens information popups when community owner token is still not created:
- From Overview / Transfer ownership button
- From Overview / How to move control node button
- Added support into storybook
Closes#12173
- Applied new design to transfer ownership popup.
- Added support in storybook.
- Added navigation to transfer ownership popup from community settings / owner token footer.
- Added navigation to transfer ownership popup from community settings / overview.
- Linked wallet send modal to the transactions popup with the needed pre-populated data.
Closes#12171
Implementing the new design for the following preview types:
- Community and channel
- General link previews (Youtube, github etc)
- Image link preview
The storybook implementation has all these links available for testing.
Missing features in the app:
- Logo (favicon)
- Community card
- Image preview details (title, domain name)
- Mint Owner token / TokenMaster token form: Changed text description for network field.
- Mint asset / collectible: Lock network. It should be the same network than the owner token one.
- Mint asset / collectible: Additional simplification / clean-up of description field.
- Added network model helper file.
Fixes#11989
* feat(Communities): Refactor token holder list item to separate file
Close#11858
* feat(Communities): Use contact details for community member info
* feat(Communities): reuse StatusMemberListItem for member token holder
* Review fixes
Co-authored-by: Michał Iskierko <61889657+endulab@users.noreply.github.com>
---------
Co-authored-by: Michał Iskierko <61889657+endulab@users.noreply.github.com>
Also fix other smaller issues found in this panel:
- display correct user name (not just `model.displayName`)
- do not display tooltips for invisible buttons
- vertically center the action buttons
- use `SearchBox` for consistency
Fixes#11848
* feat(CommunityTokens): proposal of CommunityCollectibleOwner
Close#11143
* feat(Communities): implement viewProfile from token holders list
* fix: re-request community token owners after a contact get removed from a community
Changes in the Permissions design:
1. If the collectible is unique the amount input is disabled. 1 is auto-selected
2. Show `Max. 1` for unique tokens and empty string for other tokens
Changes in the Airdrop design:
1. Show `Max. 1` for unique tokens
- It adds proxy of wallet accounts only in a single place (wallet root store) and pass the tuned model through the rest of views.
- It updates `storybook` accordingly.
Closes#11829
- It adds info panel when control node is offline.
- It modifies UI texts when control node is offline.
- It updates storybook updating permissions model and allowing permission state changes.
NOTE: Only UI, no backend. There is 1 expected integration point: permissions model item `permissionState` role.
Closes#11769
This commit includes the following changes:
1. Request from backend the messages count in a specific interval as opposed to all messages timestamps in that interval.
2. Update the chart end date before refreshing the data
3. Fix metrics type parsing in community service
4. Fix a bug where the new incoming data was not processed by ChartJs without a hover event on the chart. The fix here is to manually request paint() on model changes.d
Issues found and not handled here:
1. On large communities the backend request can take 3 minutes to complete
2. CPU usage can easily go to 100% when switching chart tabs on large communities. All the requests are processed by the backend.
It improves workaround for QTBUG-87804 in StatusDropdown, to work
nicely whenever content is set via contentItem or not. The same
solution is added to StatusDialog.
Closes: #11768
- In case of `Owner` and `TMaster` token deployment failed, a `Retry` button must be shown in minted tokens pages and it will navigate to the `Edit page` the same way it's done by using `Retry` button inside the item selected.
- Updated storybook accordingly.
Closes#11613
- Added `buttonEnabled` property to `StatusInfoBoxPanel` so it can be set from outside.
- Fixed airdrop button enable condition in minting flow. It is enabled when minting state is completed and if the token properties are infinite supply or there are still remaining tokens to be airdropped.
- Updated storybook accordingly.
Fixes#11496
Bump Status GO to support session based activity requests
Transaction module was replaced by activity module,
this change removes the old code.
Details:
- Remove transaction.Item and use the DTO directly
- Replace the still using missing functionality
- Remove old way of fetching transactions in response to the history event
- Use activity filter to provide history for "recents" in Send.
Closes#11339
- remove padding and use margins so that the listview can span the whole
width while having the scrollbar neatly next to it
- make the section header both inline and floatable (which makes it
always visible, even when scrolled away)
- fix the special search results "section" to behave the same way
- sort the results by category and name
- expose the `allTokensMode` for easy testing with storybook
Closes#10201
- Settings/About now displays the `status-go` version, read from its
`VERSION` file
- use the actual app icon, to differentiate between prod/dev version
- make the version numbers clickable, taking the user to either the
release notes (prod) or the GH commit browser (dev)
- add "Is production" switch to the About page in storybook
Closes#11424
This change corrects legacy naming that was causing confusion.
Community invites are no longer sent to users. Instead, the community is
just shared. If a user is interested in joining this shared commmunity,
they must submit a request to join.
- display an info box when in wallet testnet mode with a CTA to disable
it (functionality enabled for production builds only)
- the CTA can be tested/seen via OverviewSettingsPanelPage storybook page
Closes#11468
- Added `storybook` support to change minted tokens model with Owner and TMaster tokens.
- Added new properties into the `tokenModel` model.
- Extended `CollectiblesView` to allow Owner and TMaster tokens representation.
- Updated `MintedTokensView` in order to display Owner and TMaster tokens.
- Added logic to `enable/disable` MINT and AIRDROP token depending on the owner / tmaster tokens deploy state.
- Added temp buttons in MINT and AIRDROP pages that keeps enabled the flows although owner and tmaster backend is not ready.
- Extended navigation from outsite to minting section, depending on user profile and owner and tmaster states.
- Hide footer options in case of owner token item visualized.
- Added retry flow.
Closes#11299
Modify the PermissionUtils a bit to return an array of `[key, channelName]`
instead of just the keys and use it to display the channel names in the
permissions overview panel
(I could have used `QVariantMap` or `QJSonObject` here but those are
always sorted by `key`, so had to resort to using a plain vector/array)
Fixes#11584
Adding the export control node popup. The popup is behind an authentication wall.
1. Create ExportControlNodePopup qml
2. Add the popup in storybook
3. Create authentication flow with qml callback to open the popup after authentication
4. Add the popup open action in Global.qml
- It creates a generic `TokenInfoPanel` that will be reused in different mint token views.
- It creates new `EditOwnerTokenView` and storybook page support.
- It adds new `EditOwnerTokenView` into the minting flow, linking sign transaction flow and adding needed method to the store to do the deployment.
Closes#11296
- Added start panel in tokens welcome page.
- Added start panel in airdrop welcome page.
- Updated e2e tests according to new requirements.
Closes#11284
1. Adding OverviewSettingsFooter.qml according to design
2. Adding the footer to storybook
3. Add the footer in the overview page
4. Remove the squish tests for the old footer
Lukáš Tinkl
Noelia
Anthony Laibe
Khushboo Mehta
Michał Cieślak
Alexandra Betouni
Dario Gabriel Lipicar
Stefan
Alex Jbanca
Igor Sirotin
MishkaRogachev
Patryk Osmaczko
Sale Djenic
Alex Jbanca
Anthony Laibe
Mikhail Rogachev
Michal Iskierko