status-im
/
sqlcipher
mirror of https://github.com/status-im/sqlcipher.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
sqlcipher/test/tester.tcl

2255 lines
66 KiB
Tcl
Raw Blame History

# 2001 September 15
#
# The author disclaims copyright to this source code. In place of
# a legal notice, here is a blessing:
#
# May you do good and not evil.
# May you find forgiveness for yourself and forgive others.
# May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements some common TCL routines used for regression
# testing the SQLite library
#
# $Id: tester.tcl,v 1.143 2009/04/09 01:23:49 drh Exp $
#-------------------------------------------------------------------------
# The commands provided by the code in this file to help with creating
# test cases are as follows:
#
# Commands to manipulate the db and the file-system at a high level:
#
# is_relative_file
# test_pwd
# get_pwd
# copy_file FROM TO
# delete_file FILENAME
# drop_all_tables ?DB?
# drop_all_indexes ?DB?
# forcecopy FROM TO
# forcedelete FILENAME
#
# Test the capability of the SQLite version built into the interpreter to
# determine if a specific test can be run:
#
# capable EXPR
# ifcapable EXPR
#
# Calulate checksums based on database contents:
#
# dbcksum DB DBNAME
# allcksum ?DB?
# cksum ?DB?
#
# Commands to execute/explain SQL statements:
#
# memdbsql SQL
# stepsql DB SQL
# execsql2 SQL
# explain_no_trace SQL
# explain SQL ?DB?
# catchsql SQL ?DB?
# execsql SQL ?DB?
#
# Commands to run test cases:
#
# do_ioerr_test TESTNAME ARGS...
# crashsql ARGS...
# integrity_check TESTNAME ?DB?
# verify_ex_errcode TESTNAME EXPECTED ?DB?
# do_test TESTNAME SCRIPT EXPECTED
# do_execsql_test TESTNAME SQL EXPECTED
# do_catchsql_test TESTNAME SQL EXPECTED
# do_timed_execsql_test TESTNAME SQL EXPECTED
#
# Commands providing a lower level interface to the global test counters:
#
# set_test_counter COUNTER ?VALUE?
# omit_test TESTNAME REASON ?APPEND?
# fail_test TESTNAME
# incr_ntest
#
# Command run at the end of each test file:
#
# finish_test
#
# Commands to help create test files that run with the "WAL" and other
# permutations (see file permutations.test):
#
# wal_is_wal_mode
# wal_set_journal_mode ?DB?
# wal_check_journal_mode TESTNAME?DB?
# permutation
# presql
#
# Command to test whether or not --verbose=1 was specified on the command
# line (returns 0 for not-verbose, 1 for verbose and 2 for "verbose in the
# output file only").
#
# verbose
#
# Set the precision of FP arithmatic used by the interpreter. And
# configure SQLite to take database file locks on the page that begins
# 64KB into the database file instead of the one 1GB in. This means
# the code that handles that special case can be tested without creating
# very large database files.
#
set tcl_precision 15
sqlite3_test_control_pending_byte 0x0010000
# If the pager codec is available, create a wrapper for the [sqlite3]
# command that appends "-key {xyzzy}" to the command line. i.e. this:
#
# sqlite3 db test.db
#
# becomes
#
# sqlite3 db test.db -key {xyzzy}
#
if {[info command sqlite_orig]==""} {
rename sqlite3 sqlite_orig
proc sqlite3 {args} {
if {[llength $args]>=2 && [string index [lindex $args 0] 0]!="-"} {
# This command is opening a new database connection.
#
if {[info exists ::G(perm:sqlite3_args)]} {
set args [concat $args $::G(perm:sqlite3_args)]
}
if {[sqlite_orig -has-codec] && ![info exists ::do_not_use_codec]} {
lappend args -key {xyzzy}
}
set res [uplevel 1 sqlite_orig $args]
if {[info exists ::G(perm:presql)]} {
[lindex $args 0] eval $::G(perm:presql)
}
if {[info exists ::G(perm:dbconfig)]} {
set ::dbhandle [lindex $args 0]
uplevel #0 $::G(perm:dbconfig)
}
set res
} else {
# This command is not opening a new database connection. Pass the
# arguments through to the C implementation as the are.
#
uplevel 1 sqlite_orig $args
}
}
}
proc getFileRetries {} {
if {![info exists ::G(file-retries)]} {
#
# NOTE: Return the default number of retries for [file] operations. A
# value of zero or less here means "disabled".
#
return [expr {$::tcl_platform(platform) eq "windows" ? 50 : 0}]
}
return $::G(file-retries)
}
proc getFileRetryDelay {} {
if {![info exists ::G(file-retry-delay)]} {
#
# NOTE: Return the default number of milliseconds to wait when retrying
# failed [file] operations. A value of zero or less means "do not
# wait".
#
return 100; # TODO: Good default?
}
return $::G(file-retry-delay)
}
# Return the string representing the name of the current directory. On
# Windows, the result is "normalized" to whatever our parent command shell
# is using to prevent case-mismatch issues.
#
proc get_pwd {} {
if {$::tcl_platform(platform) eq "windows"} {
#
# NOTE: Cannot use [file normalize] here because it would alter the
# case of the result to what Tcl considers canonical, which would
# defeat the purpose of this procedure.
#
return [string map [list \\ /] \
[string trim [exec -- $::env(ComSpec) /c echo %CD%]]]
} else {
return [pwd]
}
}
# Copy file $from into $to. This is used because some versions of
# TCL for windows (notably the 8.4.1 binary package shipped with the
# current mingw release) have a broken "file copy" command.
#
proc copy_file {from to} {
do_copy_file false $from $to
}
proc forcecopy {from to} {
do_copy_file true $from $to
}
proc do_copy_file {force from to} {
set nRetry [getFileRetries] ;# Maximum number of retries.
set nDelay [getFileRetryDelay] ;# Delay in ms before retrying.
# On windows, sometimes even a [file copy -force] can fail. The cause is
# usually "tag-alongs" - programs like anti-virus software, automatic backup
# tools and various explorer extensions that keep a file open a little longer
# than we expect, causing the delete to fail.
#
# The solution is to wait a short amount of time before retrying the copy.
#
if {$nRetry > 0} {
for {set i 0} {$i<$nRetry} {incr i} {
set rc [catch {
if {$force} {
file copy -force $from $to
} else {
file copy $from $to
}
} msg]
if {$rc==0} break
if {$nDelay > 0} { after $nDelay }
}
if {$rc} { error $msg }
} else {
if {$force} {
file copy -force $from $to
} else {
file copy $from $to
}
}
}
# Check if a file name is relative
#
proc is_relative_file { file } {
return [expr {[file pathtype $file] != "absolute"}]
}
# If the VFS supports using the current directory, returns [pwd];
# otherwise, it returns only the provided suffix string (which is
# empty by default).
#
proc test_pwd { args } {
if {[llength $args] > 0} {
set suffix1 [lindex $args 0]
if {[llength $args] > 1} {
set suffix2 [lindex $args 1]
} else {
set suffix2 $suffix1
}
} else {
set suffix1 ""; set suffix2 ""
}
ifcapable curdir {
return "[get_pwd]$suffix1"
} else {
return $suffix2
}
}
# Delete a file or directory
#
proc delete_file {args} {
do_delete_file false {*}$args
}
proc forcedelete {args} {
do_delete_file true {*}$args
}
proc do_delete_file {force args} {
set nRetry [getFileRetries] ;# Maximum number of retries.
set nDelay [getFileRetryDelay] ;# Delay in ms before retrying.
foreach filename $args {
# On windows, sometimes even a [file delete -force] can fail just after
# a file is closed. The cause is usually "tag-alongs" - programs like
# anti-virus software, automatic backup tools and various explorer
# extensions that keep a file open a little longer than we expect, causing
# the delete to fail.
#
# The solution is to wait a short amount of time before retrying the
# delete.
#
if {$nRetry > 0} {
for {set i 0} {$i<$nRetry} {incr i} {
set rc [catch {
if {$force} {
file delete -force $filename
} else {
file delete $filename
}
} msg]
if {$rc==0} break
if {$nDelay > 0} { after $nDelay }
}
if {$rc} { error $msg }
} else {
if {$force} {
file delete -force $filename
} else {
file delete $filename
}
}
}
}
if {$::tcl_platform(platform) eq "windows"} {
proc do_remove_win32_dir {args} {
set nRetry [getFileRetries] ;# Maximum number of retries.
set nDelay [getFileRetryDelay] ;# Delay in ms before retrying.
foreach dirName $args {
# On windows, sometimes even a [remove_win32_dir] can fail just after
# a directory is emptied. The cause is usually "tag-alongs" - programs
# like anti-virus software, automatic backup tools and various explorer
# extensions that keep a file open a little longer than we expect,
# causing the delete to fail.
#
# The solution is to wait a short amount of time before retrying the
# removal.
#
if {$nRetry > 0} {
for {set i 0} {$i < $nRetry} {incr i} {
set rc [catch {
remove_win32_dir $dirName
} msg]
if {$rc == 0} break
if {$nDelay > 0} { after $nDelay }
}
if {$rc} { error $msg }
} else {
remove_win32_dir $dirName
}
}
}
proc do_delete_win32_file {args} {
set nRetry [getFileRetries] ;# Maximum number of retries.
set nDelay [getFileRetryDelay] ;# Delay in ms before retrying.
foreach fileName $args {
# On windows, sometimes even a [delete_win32_file] can fail just after
# a file is closed. The cause is usually "tag-alongs" - programs like
# anti-virus software, automatic backup tools and various explorer
# extensions that keep a file open a little longer than we expect,
# causing the delete to fail.
#
# The solution is to wait a short amount of time before retrying the
# delete.
#
if {$nRetry > 0} {
for {set i 0} {$i < $nRetry} {incr i} {
set rc [catch {
delete_win32_file $fileName
} msg]
if {$rc == 0} break
if {$nDelay > 0} { after $nDelay }
}
if {$rc} { error $msg }
} else {
delete_win32_file $fileName
}
}
}
}
proc execpresql {handle args} {
trace remove execution $handle enter [list execpresql $handle]
if {[info exists ::G(perm:presql)]} {
$handle eval $::G(perm:presql)
}
}
# This command should be called after loading tester.tcl from within
# all test scripts that are incompatible with encryption codecs.
#
proc do_not_use_codec {} {
set ::do_not_use_codec 1
reset_db
}
unset -nocomplain do_not_use_codec
# Return true if the "reserved_bytes" integer on database files is non-zero.
#
proc nonzero_reserved_bytes {} {
return [sqlite3 -has-codec]
}
# Print a HELP message and exit
#
proc print_help_and_quit {} {
puts {Options:
--pause Wait for user input before continuing
--soft-heap-limit=N Set the soft-heap-limit to N
--maxerror=N Quit after N errors
--verbose=(0|1) Control the amount of output. Default '1'
--output=FILE set --verbose=2 and output to FILE. Implies -q
-q Shorthand for --verbose=0
--help This message
}
exit 1
}
# The following block only runs the first time this file is sourced. It
# does not run in slave interpreters (since the ::cmdlinearg array is
# populated before the test script is run in slave interpreters).
#
if {[info exists cmdlinearg]==0} {
# Parse any options specified in the $argv array. This script accepts the
# following options:
#
# --pause
# --soft-heap-limit=NN
# --maxerror=NN
# --malloctrace=N
# --backtrace=N
# --binarylog=N
# --soak=N
# --file-retries=N
# --file-retry-delay=N
# --start=[$permutation:]$testfile
# --match=$pattern
# --verbose=$val
# --output=$filename
# -q Reduce output
# --testdir=$dir Run tests in subdirectory $dir
# --help
#
set cmdlinearg(soft-heap-limit) 0
set cmdlinearg(maxerror) 1000
set cmdlinearg(malloctrace) 0
set cmdlinearg(backtrace) 10
set cmdlinearg(binarylog) 0
set cmdlinearg(soak) 0
set cmdlinearg(file-retries) 0
set cmdlinearg(file-retry-delay) 0
set cmdlinearg(start) ""
set cmdlinearg(match) ""
set cmdlinearg(verbose) ""
set cmdlinearg(output) ""
set cmdlinearg(testdir) "testdir"
set leftover [list]
foreach a $argv {
switch -regexp -- $a {
{^-+pause$} {
# Wait for user input before continuing. This is to give the user an
# opportunity to connect profiling tools to the process.
puts -nonewline "Press RETURN to begin..."
flush stdout
gets stdin
}
{^-+soft-heap-limit=.+$} {
foreach {dummy cmdlinearg(soft-heap-limit)} [split $a =] break
}
{^-+maxerror=.+$} {
foreach {dummy cmdlinearg(maxerror)} [split $a =] break
}
{^-+malloctrace=.+$} {
foreach {dummy cmdlinearg(malloctrace)} [split $a =] break
if {$cmdlinearg(malloctrace)} {
sqlite3_memdebug_log start
}
}
{^-+backtrace=.+$} {
foreach {dummy cmdlinearg(backtrace)} [split $a =] break
sqlite3_memdebug_backtrace $value
}
{^-+binarylog=.+$} {
foreach {dummy cmdlinearg(binarylog)} [split $a =] break
set cmdlinearg(binarylog) [file normalize $cmdlinearg(binarylog)]
}
{^-+soak=.+$} {
foreach {dummy cmdlinearg(soak)} [split $a =] break
set ::G(issoak) $cmdlinearg(soak)
}
{^-+file-retries=.+$} {
foreach {dummy cmdlinearg(file-retries)} [split $a =] break
set ::G(file-retries) $cmdlinearg(file-retries)
}
{^-+file-retry-delay=.+$} {
foreach {dummy cmdlinearg(file-retry-delay)} [split $a =] break
set ::G(file-retry-delay) $cmdlinearg(file-retry-delay)
}
{^-+start=.+$} {
foreach {dummy cmdlinearg(start)} [split $a =] break
set ::G(start:file) $cmdlinearg(start)
if {[regexp {(.*):(.*)} $cmdlinearg(start) -> s.perm s.file]} {
set ::G(start:permutation) ${s.perm}
set ::G(start:file) ${s.file}
}
if {$::G(start:file) == ""} {unset ::G(start:file)}
}
{^-+match=.+$} {
foreach {dummy cmdlinearg(match)} [split $a =] break
set ::G(match) $cmdlinearg(match)
if {$::G(match) == ""} {unset ::G(match)}
}
{^-+output=.+$} {
foreach {dummy cmdlinearg(output)} [split $a =] break
set cmdlinearg(output) [file normalize $cmdlinearg(output)]
if {$cmdlinearg(verbose)==""} {
set cmdlinearg(verbose) 2
}
}
{^-+verbose=.+$} {
foreach {dummy cmdlinearg(verbose)} [split $a =] break
if {$cmdlinearg(verbose)=="file"} {
set cmdlinearg(verbose) 2
} elseif {[string is boolean -strict $cmdlinearg(verbose)]==0} {
error "option --verbose= must be set to a boolean or to \"file\""
}
}
{^-+testdir=.*$} {
foreach {dummy cmdlinearg(testdir)} [split $a =] break
}
{.*help.*} {
print_help_and_quit
}
{^-q$} {
set cmdlinearg(output) test-out.txt
set cmdlinearg(verbose) 2
}
default {
if {[file tail $a]==$a} {
lappend leftover $a
} else {
lappend leftover [file normalize $a]
}
}
}
}
set testdir [file normalize $testdir]
set cmdlinearg(TESTFIXTURE_HOME) [pwd]
set cmdlinearg(INFO_SCRIPT) [file normalize [info script]]
set argv0 [file normalize $argv0]
if {$cmdlinearg(testdir)!=""} {
file mkdir $cmdlinearg(testdir)
cd $cmdlinearg(testdir)
}
set argv $leftover
# Install the malloc layer used to inject OOM errors. And the 'automatic'
# extensions. This only needs to be done once for the process.
#
sqlite3_shutdown
install_malloc_faultsim 1
sqlite3_initialize
autoinstall_test_functions
# If the --binarylog option was specified, create the logging VFS. This
# call installs the new VFS as the default for all SQLite connections.
#
if {$cmdlinearg(binarylog)} {
vfslog new binarylog {} vfslog.bin
}
# Set the backtrace depth, if malloc tracing is enabled.
#
if {$cmdlinearg(malloctrace)} {
sqlite3_memdebug_backtrace $cmdlinearg(backtrace)
}
if {$cmdlinearg(output)!=""} {
puts "Copying output to file $cmdlinearg(output)"
set ::G(output_fd) [open $cmdlinearg(output) w]
fconfigure $::G(output_fd) -buffering line
}
if {$cmdlinearg(verbose)==""} {
set cmdlinearg(verbose) 1
}
}
# Update the soft-heap-limit each time this script is run. In that
# way if an individual test file changes the soft-heap-limit, it
# will be reset at the start of the next test file.
#
sqlite3_soft_heap_limit $cmdlinearg(soft-heap-limit)
# Create a test database
#
proc reset_db {} {
catch {db close}
forcedelete test.db
forcedelete test.db-journal
forcedelete test.db-wal
sqlite3 db ./test.db
set ::DB [sqlite3_connection_pointer db]
if {[info exists ::SETUP_SQL]} {
db eval $::SETUP_SQL
}
}
reset_db
# Abort early if this script has been run before.
#
if {[info exists TC(count)]} return
# Make sure memory statistics are enabled.
#
sqlite3_config_memstatus 1
# Initialize the test counters and set up commands to access them.
# Or, if this is a slave interpreter, set up aliases to write the
# counters in the parent interpreter.
#
if {0==[info exists ::SLAVE]} {
set TC(errors) 0
set TC(count) 0
set TC(fail_list) [list]
set TC(omit_list) [list]
set TC(warn_list) [list]
proc set_test_counter {counter args} {
if {[llength $args]} {
set ::TC($counter) [lindex $args 0]
}
set ::TC($counter)
}
}
# Record the fact that a sequence of tests were omitted.
#
proc omit_test {name reason {append 1}} {
set omitList [set_test_counter omit_list]
if {$append} {
lappend omitList [list $name $reason]
}
set_test_counter omit_list $omitList
}
# Record the fact that a test failed.
#
proc fail_test {name} {
set f [set_test_counter fail_list]
lappend f $name
set_test_counter fail_list $f
set_test_counter errors [expr [set_test_counter errors] + 1]
set nFail [set_test_counter errors]
if {$nFail>=$::cmdlinearg(maxerror)} {
output2 "*** Giving up..."
finalize_testing
}
}
# Remember a warning message to be displayed at the conclusion of all testing
#
proc warning {msg {append 1}} {
output2 "Warning: $msg"
set warnList [set_test_counter warn_list]
if {$append} {
lappend warnList $msg
}
set_test_counter warn_list $warnList
}
# Increment the number of tests run
#
proc incr_ntest {} {
set_test_counter count [expr [set_test_counter count] + 1]
}
# Return true if --verbose=1 was specified on the command line. Otherwise,
# return false.
#
proc verbose {} {
return $::cmdlinearg(verbose)
}
# Use the following commands instead of [puts] for test output within
# this file. Test scripts can still use regular [puts], which is directed
# to stdout and, if one is open, the --output file.
#
# output1: output that should be printed if --verbose=1 was specified.
# output2: output that should be printed unconditionally.
# output2_if_no_verbose: output that should be printed only if --verbose=0.
#
proc output1 {args} {
set v [verbose]
if {$v==1} {
uplevel output2 $args
} elseif {$v==2} {
uplevel puts [lrange $args 0 end-1] $::G(output_fd) [lrange $args end end]
}
}
proc output2 {args} {
set nArg [llength $args]
uplevel puts $args
}
proc output2_if_no_verbose {args} {
set v [verbose]
if {$v==0} {
uplevel output2 $args
} elseif {$v==2} {
uplevel puts [lrange $args 0 end-1] stdout [lrange $args end end]
}
}
# Override the [puts] command so that if no channel is explicitly
# specified the string is written to both stdout and to the file
# specified by "--output=", if any.
#
proc puts_override {args} {
set nArg [llength $args]
if {$nArg==1 || ($nArg==2 && [string first [lindex $args 0] -nonewline]==0)} {
uplevel puts_original $args
if {[info exists ::G(output_fd)]} {
uplevel puts [lrange $args 0 end-1] $::G(output_fd) [lrange $args end end]
}
} else {
# A channel was explicitly specified.
uplevel puts_original $args
}
}
rename puts puts_original
proc puts {args} { uplevel puts_override $args }
# Invoke the do_test procedure to run a single test
#
# The $expected parameter is the expected result. The result is the return
# value from the last TCL command in $cmd.
#
# Normally, $expected must match exactly. But if $expected is of the form
# "/regexp/" then regular expression matching is used. If $expected is
# "~/regexp/" then the regular expression must NOT match. If $expected is
# of the form "#/value-list/" then each term in value-list must be numeric
# and must approximately match the corresponding numeric term in $result.
# Values must match within 10%. Or if the $expected term is A..B then the
# $result term must be in between A and B.
#
proc do_test {name cmd expected} {
global argv cmdlinearg
fix_testname name
sqlite3_memdebug_settitle $name
# if {[llength $argv]==0} {
# set go 1
# } else {
# set go 0
# foreach pattern $argv {
# if {[string match $pattern $name]} {
# set go 1
# break
# }
# }
# }
if {[info exists ::G(perm:prefix)]} {
set name "$::G(perm:prefix)$name"
}
incr_ntest
output1 -nonewline $name...
flush stdout
if {![info exists ::G(match)] || [string match $::G(match) $name]} {
if {[catch {uplevel #0 "$cmd;\n"} result]} {
output2_if_no_verbose -nonewline $name...
output2 "\nError: $result"
fail_test $name
} else {
if {[regexp {^[~#]?/.*/$} $expected]} {
# "expected" is of the form "/PATTERN/" then the result if correct if
# regular expression PATTERN matches the result. "~/PATTERN/" means
# the regular expression must not match.
if {[string index $expected 0]=="~"} {
set re [string range $expected 2 end-1]
if {[string index $re 0]=="*"} {
# If the regular expression begins with * then treat it as a glob instead
set ok [string match $re $result]
} else {
set re [string map {# {[-0-9.]+}} $re]
set ok [regexp $re $result]
}
set ok [expr {!$ok}]
} elseif {[string index $expected 0]=="#"} {
# Numeric range value comparison. Each term of the $result is matched
# against one term of $expect. Both $result and $expected terms must be
# numeric. The values must match within 10%. Or if $expected is of the
# form A..B then the $result term must be between A and B.
set e2 [string range $expected 2 end-1]
foreach i $result j $e2 {
if {[regexp {^(-?\d+)\.\.(-?\d)$} $j all A B]} {
set ok [expr {$i+0>=$A && $i+0<=$B}]
} else {
set ok [expr {$i+0>=0.9*$j && $i+0<=1.1*$j}]
}
if {!$ok} break
}
if {$ok && [llength $result]!=[llength $e2]} {set ok 0}
} else {
set re [string range $expected 1 end-1]
if {[string index $re 0]=="*"} {
# If the regular expression begins with * then treat it as a glob instead
set ok [string match $re $result]
} else {
set re [string map {# {[-0-9.]+}} $re]
set ok [regexp $re $result]
}
}
} elseif {[regexp {^~?\*.*\*$} $expected]} {
# "expected" is of the form "*GLOB*" then the result if correct if
# glob pattern GLOB matches the result. "~/GLOB/" means
# the glob must not match.
if {[string index $expected 0]=="~"} {
set e [string range $expected 1 end]
set ok [expr {![string match $e $result]}]
} else {
set ok [string match $expected $result]
}
} else {
set ok [expr {[string compare $result $expected]==0}]
}
if {!$ok} {
# if {![info exists ::testprefix] || $::testprefix eq ""} {
# error "no test prefix"
# }
output1 ""
output2 "! $name expected: \[$expected\]\n! $name got: \[$result\]"
fail_test $name
} else {
output1 " Ok"
}
}
} else {
output1 " Omitted"
omit_test $name "pattern mismatch" 0
}
flush stdout
}
proc dumpbytes {s} {
set r ""
for {set i 0} {$i < [string length $s]} {incr i} {
if {$i > 0} {append r " "}
append r [format %02X [scan [string index $s $i] %c]]
}
return $r
}
proc catchcmd {db {cmd ""}} {
global CLI
set out [open cmds.txt w]
puts $out $cmd
close $out
set line "exec $CLI $db < cmds.txt"
set rc [catch { eval $line } msg]
list $rc $msg
}
proc catchcmdex {db {cmd ""}} {
global CLI
set out [open cmds.txt w]
fconfigure $out -encoding binary -translation binary
puts -nonewline $out $cmd
close $out
set line "exec -keepnewline -- $CLI $db < cmds.txt"
set chans [list stdin stdout stderr]
foreach chan $chans {
catch {
set modes($chan) [fconfigure $chan]
fconfigure $chan -encoding binary -translation binary -buffering none
}
}
set rc [catch { eval $line } msg]
foreach chan $chans {
catch {
eval fconfigure [list $chan] $modes($chan)
}
}
# puts [dumpbytes $msg]
list $rc $msg
}
proc filepath_normalize {p} {
# test cases should be written to assume "unix"-like file paths
if {$::tcl_platform(platform)!="unix"} {
# lreverse*2 as a hack to remove any unneeded {} after the string map
lreverse [lreverse [string map {\\ /} [regsub -nocase -all {[a-z]:[/\\]+} $p {/}]]]
} {
set p
}
}
proc do_filepath_test {name cmd expected} {
uplevel [list do_test $name [
subst -nocommands { filepath_normalize [ $cmd ] }
] [filepath_normalize $expected]]
}
proc realnum_normalize {r} {
# different TCL versions display floating point values differently.
string map {1.#INF inf Inf inf .0e e} [regsub -all {(e[+-])0+} $r {\1}]
}
proc do_realnum_test {name cmd expected} {
uplevel [list do_test $name [
subst -nocommands { realnum_normalize [ $cmd ] }
] [realnum_normalize $expected]]
}
proc fix_testname {varname} {
upvar $varname testname
if {[info exists ::testprefix]
&& [string is digit [string range $testname 0 0]]
} {
set testname "${::testprefix}-$testname"
}
}
proc normalize_list {L} {
set L2 [list]
foreach l $L {lappend L2 $l}
set L2
}
proc do_execsql_test {testname sql {result {}}} {
fix_testname testname
uplevel do_test [list $testname] [list "execsql {$sql}"] [list [list {*}$result]]
}
proc do_catchsql_test {testname sql result} {
fix_testname testname
uplevel do_test [list $testname] [list "catchsql {$sql}"] [list $result]
}
proc do_timed_execsql_test {testname sql {result {}}} {
fix_testname testname
uplevel do_test [list $testname] [list "execsql_timed {$sql}"]\
[list [list {*}$result]]
}
proc do_eqp_test {name sql res} {
uplevel do_execsql_test $name [list "EXPLAIN QUERY PLAN $sql"] [list $res]
}
#-------------------------------------------------------------------------
# Usage: do_select_tests PREFIX ?SWITCHES? TESTLIST
#
# Where switches are:
#
# -errorformat FMTSTRING
# -count
# -query SQL
# -tclquery TCL
# -repair TCL
#
proc do_select_tests {prefix args} {
set testlist [lindex $args end]
set switches [lrange $args 0 end-1]
set errfmt ""
set countonly 0
set tclquery ""
set repair ""
for {set i 0} {$i < [llength $switches]} {incr i} {
set s [lindex $switches $i]
set n [string length $s]
if {$n>=2 && [string equal -length $n $s "-query"]} {
set tclquery [list execsql [lindex $switches [incr i]]]
} elseif {$n>=2 && [string equal -length $n $s "-tclquery"]} {
set tclquery [lindex $switches [incr i]]
} elseif {$n>=2 && [string equal -length $n $s "-errorformat"]} {
set errfmt [lindex $switches [incr i]]
} elseif {$n>=2 && [string equal -length $n $s "-repair"]} {
set repair [lindex $switches [incr i]]
} elseif {$n>=2 && [string equal -length $n $s "-count"]} {
set countonly 1
} else {
error "unknown switch: $s"
}
}
if {$countonly && $errfmt!=""} {
error "Cannot use -count and -errorformat together"
}
set nTestlist [llength $testlist]
if {$nTestlist%3 || $nTestlist==0 } {
error "SELECT test list contains [llength $testlist] elements"
}
eval $repair
foreach {tn sql res} $testlist {
if {$tclquery != ""} {
execsql $sql
uplevel do_test ${prefix}.$tn [list $tclquery] [list [list {*}$res]]
} elseif {$countonly} {
set nRow 0
db eval $sql {incr nRow}
uplevel do_test ${prefix}.$tn [list [list set {} $nRow]] [list $res]
} elseif {$errfmt==""} {
uplevel do_execsql_test ${prefix}.${tn} [list $sql] [list [list {*}$res]]
} else {
set res [list 1 [string trim [format $errfmt {*}$res]]]
uplevel do_catchsql_test ${prefix}.${tn} [list $sql] [list $res]
}
eval $repair
}
}
proc delete_all_data {} {
db eval {SELECT tbl_name AS t FROM sqlite_master WHERE type = 'table'} {
db eval "DELETE FROM '[string map {' ''} $t]'"
}
}
# Run an SQL script.
# Return the number of microseconds per statement.
#
proc speed_trial {name numstmt units sql} {
output2 -nonewline [format {%-21.21s } $name...]
flush stdout
set speed [time {sqlite3_exec_nr db $sql}]
set tm [lindex $speed 0]
if {$tm == 0} {
set rate [format %20s "many"]
} else {
set rate [format %20.5f [expr {1000000.0*$numstmt/$tm}]]
}
set u2 $units/s
output2 [format {%12d uS %s %s} $tm $rate $u2]
global total_time
set total_time [expr {$total_time+$tm}]
lappend ::speed_trial_times $name $tm
}
proc speed_trial_tcl {name numstmt units script} {
output2 -nonewline [format {%-21.21s } $name...]
flush stdout
set speed [time {eval $script}]
set tm [lindex $speed 0]
if {$tm == 0} {
set rate [format %20s "many"]
} else {
set rate [format %20.5f [expr {1000000.0*$numstmt/$tm}]]
}
set u2 $units/s
output2 [format {%12d uS %s %s} $tm $rate $u2]
global total_time
set total_time [expr {$total_time+$tm}]
lappend ::speed_trial_times $name $tm
}
proc speed_trial_init {name} {
global total_time
set total_time 0
set ::speed_trial_times [list]
sqlite3 versdb :memory:
set vers [versdb one {SELECT sqlite_source_id()}]
versdb close
output2 "SQLite $vers"
}
proc speed_trial_summary {name} {
global total_time
output2 [format {%-21.21s %12d uS TOTAL} $name $total_time]
if { 0 } {
sqlite3 versdb :memory:
set vers [lindex [versdb one {SELECT sqlite_source_id()}] 0]
versdb close
output2 "CREATE TABLE IF NOT EXISTS time(version, script, test, us);"
foreach {test us} $::speed_trial_times {
output2 "INSERT INTO time VALUES('$vers', '$name', '$test', $us);"
}
}
}
# Run this routine last
#
proc finish_test {} {
catch {db close}
catch {db1 close}
catch {db2 close}
catch {db3 close}
if {0==[info exists ::SLAVE]} { finalize_testing }
}
proc finalize_testing {} {
global sqlite_open_file_count
set omitList [set_test_counter omit_list]
catch {db close}
catch {db2 close}
catch {db3 close}
vfs_unlink_test
sqlite3 db {}
# sqlite3_clear_tsd_memdebug
db close
sqlite3_reset_auto_extension
sqlite3_soft_heap_limit 0
set nTest [incr_ntest]
set nErr [set_test_counter errors]
set nKnown 0
if {[file readable known-problems.txt]} {
set fd [open known-problems.txt]
set content [read $fd]
close $fd
foreach x $content {set known_error($x) 1}
foreach x [set_test_counter fail_list] {
if {[info exists known_error($x)]} {incr nKnown}
}
}
if {$nKnown>0} {
output2 "[expr {$nErr-$nKnown}] new errors and $nKnown known errors\
out of $nTest tests"
} else {
set cpuinfo {}
if {[catch {exec hostname} hname]==0} {set cpuinfo [string trim $hname]}
append cpuinfo " $::tcl_platform(os)"
append cpuinfo " [expr {$::tcl_platform(pointerSize)*8}]-bit"
append cpuinfo " [string map {E -e} $::tcl_platform(byteOrder)]"
output2 "SQLite [sqlite3 -sourceid]"
output2 "$nErr errors out of $nTest tests on $cpuinfo"
}
if {$nErr>$nKnown} {
output2 -nonewline "!Failures on these tests:"
foreach x [set_test_counter fail_list] {
if {![info exists known_error($x)]} {output2 -nonewline " $x"}
}
output2 ""
}
foreach warning [set_test_counter warn_list] {
output2 "Warning: $warning"
}
run_thread_tests 1
if {[llength $omitList]>0} {
output2 "Omitted test cases:"
set prec {}
foreach {rec} [lsort $omitList] {
if {$rec==$prec} continue
set prec $rec
output2 [format {. %-12s %s} [lindex $rec 0] [lindex $rec 1]]
}
}
if {$nErr>0 && ![working_64bit_int]} {
output2 "******************************************************************"
output2 "N.B.: The version of TCL that you used to build this test harness"
output2 "is defective in that it does not support 64-bit integers. Some or"
output2 "all of the test failures above might be a result from this defect"
output2 "in your TCL build."
output2 "******************************************************************"
}
if {$::cmdlinearg(binarylog)} {
vfslog finalize binarylog
}
if {$sqlite_open_file_count} {
output2 "$sqlite_open_file_count files were left open"
incr nErr
}
if {[lindex [sqlite3_status SQLITE_STATUS_MALLOC_COUNT 0] 1]>0 ||
[sqlite3_memory_used]>0} {
output2 "Unfreed memory: [sqlite3_memory_used] bytes in\
[lindex [sqlite3_status SQLITE_STATUS_MALLOC_COUNT 0] 1] allocations"
incr nErr
ifcapable memdebug||mem5||(mem3&&debug) {
output2 "Writing unfreed memory log to \"./memleak.txt\""
sqlite3_memdebug_dump ./memleak.txt
}
} else {
output2 "All memory allocations freed - no leaks"
ifcapable memdebug||mem5 {
sqlite3_memdebug_dump ./memusage.txt
}
}
show_memstats
output2 "Maximum memory usage: [sqlite3_memory_highwater 1] bytes"
output2 "Current memory usage: [sqlite3_memory_highwater] bytes"
if {[info commands sqlite3_memdebug_malloc_count] ne ""} {
output2 "Number of malloc() : [sqlite3_memdebug_malloc_count] calls"
}
if {$::cmdlinearg(malloctrace)} {
output2 "Writing mallocs.sql..."
memdebug_log_sql
sqlite3_memdebug_log stop
sqlite3_memdebug_log clear
if {[sqlite3_memory_used]>0} {
output2 "Writing leaks.sql..."
sqlite3_memdebug_log sync
memdebug_log_sql leaks.sql
}
}
foreach f [glob -nocomplain test.db-*-journal] {
forcedelete $f
}
foreach f [glob -nocomplain test.db-mj*] {
forcedelete $f
}
exit [expr {$nErr>0}]
}
# Display memory statistics for analysis and debugging purposes.
#
proc show_memstats {} {
set x [sqlite3_status SQLITE_STATUS_MEMORY_USED 0]
set y [sqlite3_status SQLITE_STATUS_MALLOC_SIZE 0]
set val [format {now %10d max %10d max-size %10d} \
[lindex $x 1] [lindex $x 2] [lindex $y 2]]
output1 "Memory used: $val"
set x [sqlite3_status SQLITE_STATUS_MALLOC_COUNT 0]
set val [format {now %10d max %10d} [lindex $x 1] [lindex $x 2]]
output1 "Allocation count: $val"
set x [sqlite3_status SQLITE_STATUS_PAGECACHE_USED 0]
set y [sqlite3_status SQLITE_STATUS_PAGECACHE_SIZE 0]
set val [format {now %10d max %10d max-size %10d} \
[lindex $x 1] [lindex $x 2] [lindex $y 2]]
output1 "Page-cache used: $val"
set x [sqlite3_status SQLITE_STATUS_PAGECACHE_OVERFLOW 0]
set val [format {now %10d max %10d} [lindex $x 1] [lindex $x 2]]
output1 "Page-cache overflow: $val"
set x [sqlite3_status SQLITE_STATUS_SCRATCH_USED 0]
set val [format {now %10d max %10d} [lindex $x 1] [lindex $x 2]]
output1 "Scratch memory used: $val"
set x [sqlite3_status SQLITE_STATUS_SCRATCH_OVERFLOW 0]
set y [sqlite3_status SQLITE_STATUS_SCRATCH_SIZE 0]
set val [format {now %10d max %10d max-size %10d} \
[lindex $x 1] [lindex $x 2] [lindex $y 2]]
output1 "Scratch overflow: $val"
ifcapable yytrackmaxstackdepth {
set x [sqlite3_status SQLITE_STATUS_PARSER_STACK 0]
set val [format { max %10d} [lindex $x 2]]
output2 "Parser stack depth: $val"
}
}
# A procedure to execute SQL
#
proc execsql {sql {db db}} {
# puts "SQL = $sql"
uplevel [list $db eval $sql]
}
proc execsql_timed {sql {db db}} {
set tm [time {
set x [uplevel [list $db eval $sql]]
} 1]
set tm [lindex $tm 0]
output1 -nonewline " ([expr {$tm*0.001}]ms) "
set x
}
# Execute SQL and catch exceptions.
#
proc catchsql {sql {db db}} {
# puts "SQL = $sql"
set r [catch [list uplevel [list $db eval $sql]] msg]
lappend r $msg
return $r
}
# Do an VDBE code dump on the SQL given
#
proc explain {sql {db db}} {
output2 ""
output2 "addr opcode p1 p2 p3 p4 p5 #"
output2 "---- ------------ ------ ------ ------ --------------- -- -"
$db eval "explain $sql" {} {
output2 [format {%-4d %-12.12s %-6d %-6d %-6d % -17s %s %s} \
$addr $opcode $p1 $p2 $p3 $p4 $p5 $comment
]
}
}
proc explain_i {sql {db db}} {
output2 ""
output2 "addr opcode p1 p2 p3 p4 p5 #"
output2 "---- ------------ ------ ------ ------ ---------------- -- -"
# Set up colors for the different opcodes. Scheme is as follows:
#
# Red: Opcodes that write to a b-tree.
# Blue: Opcodes that reposition or seek a cursor.
# Green: The ResultRow opcode.
#
if { [catch {fconfigure stdout -mode}]==0 } {
set R "\033\[31;1m" ;# Red fg
set G "\033\[32;1m" ;# Green fg
set B "\033\[34;1m" ;# Red fg
set D "\033\[39;0m" ;# Default fg
} else {
set R ""
set G ""
set B ""
set D ""
}
foreach opcode {
Seek SeekGE SeekGT SeekLE SeekLT NotFound Last Rewind
NoConflict Next Prev VNext VPrev VFilter
SorterSort SorterNext NextIfOpen
} {
set color($opcode) $B
}
foreach opcode {ResultRow} {
set color($opcode) $G
}
foreach opcode {IdxInsert Insert Delete IdxDelete} {
set color($opcode) $R
}
set bSeenGoto 0
$db eval "explain $sql" {} {
set x($addr) 0
set op($addr) $opcode
if {$opcode == "Goto" && ($bSeenGoto==0 || ($p2 > $addr+10))} {
set linebreak($p2) 1
set bSeenGoto 1
}
if {$opcode=="Once"} {
for {set i $addr} {$i<$p2} {incr i} {
set star($i) $addr
}
}
if {$opcode=="Next" || $opcode=="Prev"
|| $opcode=="VNext" || $opcode=="VPrev"
|| $opcode=="SorterNext" || $opcode=="NextIfOpen"
} {
for {set i $p2} {$i<$addr} {incr i} {
incr x($i) 2
}
}
if {$opcode == "Goto" && $p2<$addr && $op($p2)=="Yield"} {
for {set i [expr $p2+1]} {$i<$addr} {incr i} {
incr x($i) 2
}
}
if {$opcode == "Halt" && $comment == "End of coroutine"} {
set linebreak([expr $addr+1]) 1
}
}
$db eval "explain $sql" {} {
if {[info exists linebreak($addr)]} {
output2 ""
}
set I [string repeat " " $x($addr)]
if {[info exists star($addr)]} {
set ii [expr $x($star($addr))]
append I " "
set I [string replace $I $ii $ii *]
}
set col ""
catch { set col $color($opcode) }
output2 [format {%-4d %s%s%-12.12s%s %-6d %-6d %-6d % -17s %s %s} \
$addr $I $col $opcode $D $p1 $p2 $p3 $p4 $p5 $comment
]
}
output2 "---- ------------ ------ ------ ------ ---------------- -- -"
}
# Show the VDBE program for an SQL statement but omit the Trace
# opcode at the beginning. This procedure can be used to prove
# that different SQL statements generate exactly the same VDBE code.
#
proc explain_no_trace {sql} {
set tr [db eval "EXPLAIN $sql"]
return [lrange $tr 7 end]
}
# Another procedure to execute SQL. This one includes the field
# names in the returned list.
#
proc execsql2 {sql} {
set result {}
db eval $sql data {
foreach f $data(*) {
lappend result $f $data($f)
}
}
return $result
}
# Use a temporary in-memory database to execute SQL statements
#
proc memdbsql {sql} {
sqlite3 memdb :memory:
set result [memdb eval $sql]
memdb close
return $result
}
# Use the non-callback API to execute multiple SQL statements
#
proc stepsql {dbptr sql} {
set sql [string trim $sql]
set r 0
while {[string length $sql]>0} {
if {[catch {sqlite3_prepare $dbptr $sql -1 sqltail} vm]} {
return [list 1 $vm]
}
set sql [string trim $sqltail]
# while {[sqlite_step $vm N VAL COL]=="SQLITE_ROW"} {
# foreach v $VAL {lappend r $v}
# }
while {[sqlite3_step $vm]=="SQLITE_ROW"} {
for {set i 0} {$i<[sqlite3_data_count $vm]} {incr i} {
lappend r [sqlite3_column_text $vm $i]
}
}
if {[catch {sqlite3_finalize $vm} errmsg]} {
return [list 1 $errmsg]
}
}
return $r
}
# Do an integrity check of the entire database
#
proc integrity_check {name {db db}} {
ifcapable integrityck {
do_test $name [list execsql {PRAGMA integrity_check} $db] {ok}
}
}
# Check the extended error code
#
proc verify_ex_errcode {name expected {db db}} {
do_test $name [list sqlite3_extended_errcode $db] $expected
}
# Return true if the SQL statement passed as the second argument uses a
# statement transaction.
#
proc sql_uses_stmt {db sql} {
set stmt [sqlite3_prepare $db $sql -1 dummy]
set uses [uses_stmt_journal $stmt]
sqlite3_finalize $stmt
return $uses
}
proc fix_ifcapable_expr {expr} {
set ret ""
set state 0
for {set i 0} {$i < [string length $expr]} {incr i} {
set char [string range $expr $i $i]
set newstate [expr {[string is alnum $char] || $char eq "_"}]
if {$newstate && !$state} {
append ret {$::sqlite_options(}
}
if {!$newstate && $state} {
append ret )
}
append ret $char
set state $newstate
}
if {$state} {append ret )}
return $ret
}
# Returns non-zero if the capabilities are present; zero otherwise.
#
proc capable {expr} {
set e [fix_ifcapable_expr $expr]; return [expr ($e)]
}
# Evaluate a boolean expression of capabilities. If true, execute the
# code. Omit the code if false.
#
proc ifcapable {expr code {else ""} {elsecode ""}} {
#regsub -all {[a-z_0-9]+} $expr {$::sqlite_options(&)} e2
set e2 [fix_ifcapable_expr $expr]
if ($e2) {
set c [catch {uplevel 1 $code} r]
} else {
set c [catch {uplevel 1 $elsecode} r]
}
return -code $c $r
}
# This proc execs a seperate process that crashes midway through executing
# the SQL script $sql on database test.db.
#
# The crash occurs during a sync() of file $crashfile. When the crash
# occurs a random subset of all unsynced writes made by the process are
# written into the files on disk. Argument $crashdelay indicates the
# number of file syncs to wait before crashing.
#
# The return value is a list of two elements. The first element is a
# boolean, indicating whether or not the process actually crashed or
# reported some other error. The second element in the returned list is the
# error message. This is "child process exited abnormally" if the crash
# occurred.
#
# crashsql -delay CRASHDELAY -file CRASHFILE ?-blocksize BLOCKSIZE? $sql
#
proc crashsql {args} {
set blocksize ""
set crashdelay 1
set prngseed 0
set opendb { sqlite3 db test.db -vfs crash }
set tclbody {}
set crashfile ""
set dc ""
set sql [lindex $args end]
for {set ii 0} {$ii < [llength $args]-1} {incr ii 2} {
set z [lindex $args $ii]
set n [string length $z]
set z2 [lindex $args [expr $ii+1]]
if {$n>1 && [string first $z -delay]==0} {set crashdelay $z2} \
elseif {$n>1 && [string first $z -opendb]==0} {set opendb $z2} \
elseif {$n>1 && [string first $z -seed]==0} {set prngseed $z2} \
elseif {$n>1 && [string first $z -file]==0} {set crashfile $z2} \
elseif {$n>1 && [string first $z -tclbody]==0} {set tclbody $z2} \
elseif {$n>1 && [string first $z -blocksize]==0} {set blocksize "-s $z2" } \
elseif {$n>1 && [string first $z -characteristics]==0} {set dc "-c {$z2}" } \
else { error "Unrecognized option: $z" }
}
if {$crashfile eq ""} {
error "Compulsory option -file missing"
}
# $crashfile gets compared to the native filename in
# cfSync(), which can be different then what TCL uses by
# default, so here we force it to the "nativename" format.
set cfile [string map {\\ \\\\} [file nativename [file join [get_pwd] $crashfile]]]
set f [open crash.tcl w]
puts $f "sqlite3_crash_enable 1"
puts $f "sqlite3_crashparams $blocksize $dc $crashdelay $cfile"
puts $f "sqlite3_test_control_pending_byte $::sqlite_pending_byte"
# This block sets the cache size of the main database to 10
# pages. This is done in case the build is configured to omit
# "PRAGMA cache_size".
if {$opendb!=""} {
puts $f $opendb
puts $f {db eval {SELECT * FROM sqlite_master;}}
puts $f {set bt [btree_from_db db]}
puts $f {btree_set_cache_size $bt 10}
}
if {$prngseed} {
set seed [expr {$prngseed%10007+1}]
# puts seed=$seed
puts $f "db eval {SELECT randomblob($seed)}"
}
if {[string length $tclbody]>0} {
puts $f $tclbody
}
if {[string length $sql]>0} {
puts $f "db eval {"
puts $f "$sql"
puts $f "}"
}
close $f
set r [catch {
exec [info nameofexec] crash.tcl >@stdout
} msg]
# Windows/ActiveState TCL returns a slightly different
# error message. We map that to the expected message
# so that we don't have to change all of the test
# cases.
if {$::tcl_platform(platform)=="windows"} {
if {$msg=="child killed: unknown signal"} {
set msg "child process exited abnormally"
}
}
lappend r $msg
}
proc run_ioerr_prep {} {
set ::sqlite_io_error_pending 0
catch {db close}
catch {db2 close}
catch {forcedelete test.db}
catch {forcedelete test.db-journal}
catch {forcedelete test2.db}
catch {forcedelete test2.db-journal}
set ::DB [sqlite3 db test.db; sqlite3_connection_pointer db]
sqlite3_extended_result_codes $::DB $::ioerropts(-erc)
if {[info exists ::ioerropts(-tclprep)]} {
eval $::ioerropts(-tclprep)
}
if {[info exists ::ioerropts(-sqlprep)]} {
execsql $::ioerropts(-sqlprep)
}
expr 0
}
# Usage: do_ioerr_test <test number> <options...>
#
# This proc is used to implement test cases that check that IO errors
# are correctly handled. The first argument, <test number>, is an integer
# used to name the tests executed by this proc. Options are as follows:
#
# -tclprep TCL script to run to prepare test.
# -sqlprep SQL script to run to prepare test.
# -tclbody TCL script to run with IO error simulation.
# -sqlbody TCL script to run with IO error simulation.
# -exclude List of 'N' values not to test.
# -erc Use extended result codes
# -persist Make simulated I/O errors persistent
# -start Value of 'N' to begin with (default 1)
#
# -cksum Boolean. If true, test that the database does
# not change during the execution of the test case.
#
proc do_ioerr_test {testname args} {
set ::ioerropts(-start) 1
set ::ioerropts(-cksum) 0
set ::ioerropts(-erc) 0
set ::ioerropts(-count) 100000000
set ::ioerropts(-persist) 1
set ::ioerropts(-ckrefcount) 0
set ::ioerropts(-restoreprng) 1
array set ::ioerropts $args
# TEMPORARY: For 3.5.9, disable testing of extended result codes. There are
# a couple of obscure IO errors that do not return them.
set ::ioerropts(-erc) 0
# Create a single TCL script from the TCL and SQL specified
# as the body of the test.
set ::ioerrorbody {}
if {[info exists ::ioerropts(-tclbody)]} {
append ::ioerrorbody "$::ioerropts(-tclbody)\n"
}
if {[info exists ::ioerropts(-sqlbody)]} {
append ::ioerrorbody "db eval {$::ioerropts(-sqlbody)}"
}
save_prng_state
if {$::ioerropts(-cksum)} {
run_ioerr_prep
eval $::ioerrorbody
set ::goodcksum [cksum]
}
set ::go 1
#reset_prng_state
for {set n $::ioerropts(-start)} {$::go} {incr n} {
set ::TN $n
incr ::ioerropts(-count) -1
if {$::ioerropts(-count)<0} break
# Skip this IO error if it was specified with the "-exclude" option.
if {[info exists ::ioerropts(-exclude)]} {
if {[lsearch $::ioerropts(-exclude) $n]!=-1} continue
}
if {$::ioerropts(-restoreprng)} {
restore_prng_state
}
# Delete the files test.db and test2.db, then execute the TCL and
# SQL (in that order) to prepare for the test case.
do_test $testname.$n.1 {
run_ioerr_prep
} {0}
# Read the 'checksum' of the database.
if {$::ioerropts(-cksum)} {
set ::checksum [cksum]
}
# Set the Nth IO error to fail.
do_test $testname.$n.2 [subst {
set ::sqlite_io_error_persist $::ioerropts(-persist)
set ::sqlite_io_error_pending $n
}] $n
# Execute the TCL script created for the body of this test. If
# at least N IO operations performed by SQLite as a result of
# the script, the Nth will fail.
do_test $testname.$n.3 {
set ::sqlite_io_error_hit 0
set ::sqlite_io_error_hardhit 0
set r [catch $::ioerrorbody msg]
set ::errseen $r
set rc [sqlite3_errcode $::DB]
if {$::ioerropts(-erc)} {
# If we are in extended result code mode, make sure all of the
# IOERRs we get back really do have their extended code values.
# If an extended result code is returned, the sqlite3_errcode
# TCLcommand will return a string of the form: SQLITE_IOERR+nnnn
# where nnnn is a number
if {[regexp {^SQLITE_IOERR} $rc] && ![regexp {IOERR\+\d} $rc]} {
return $rc
}
} else {
# If we are not in extended result code mode, make sure no
# extended error codes are returned.
if {[regexp {\+\d} $rc]} {
return $rc
}
}
# The test repeats as long as $::go is non-zero. $::go starts out
# as 1. When a test runs to completion without hitting an I/O
# error, that means there is no point in continuing with this test
# case so set $::go to zero.
#
if {$::sqlite_io_error_pending>0} {
set ::go 0
set q 0
set ::sqlite_io_error_pending 0
} else {
set q 1
}
set s [expr $::sqlite_io_error_hit==0]
if {$::sqlite_io_error_hit>$::sqlite_io_error_hardhit && $r==0} {
set r 1
}
set ::sqlite_io_error_hit 0
# One of two things must have happened. either
# 1. We never hit the IO error and the SQL returned OK
# 2. An IO error was hit and the SQL failed
#
#puts "s=$s r=$r q=$q"
expr { ($s && !$r && !$q) || (!$s && $r && $q) }
} {1}
set ::sqlite_io_error_hit 0
set ::sqlite_io_error_pending 0
# Check that no page references were leaked. There should be
# a single reference if there is still an active transaction,
# or zero otherwise.
#
# UPDATE: If the IO error occurs after a 'BEGIN' but before any
# locks are established on database files (i.e. if the error
# occurs while attempting to detect a hot-journal file), then
# there may 0 page references and an active transaction according
# to [sqlite3_get_autocommit].
#
if {$::go && $::sqlite_io_error_hardhit && $::ioerropts(-ckrefcount)} {
do_test $testname.$n.4 {
set bt [btree_from_db db]
db_enter db
array set stats [btree_pager_stats $bt]
db_leave db
set nRef $stats(ref)
expr {$nRef == 0 || ([sqlite3_get_autocommit db]==0 && $nRef == 1)}
} {1}
}
# If there is an open database handle and no open transaction,
# and the pager is not running in exclusive-locking mode,
# check that the pager is in "unlocked" state. Theoretically,
# if a call to xUnlock() failed due to an IO error the underlying
# file may still be locked.
#
ifcapable pragma {
if { [info commands db] ne ""
&& $::ioerropts(-ckrefcount)
&& [db one {pragma locking_mode}] eq "normal"
&& [sqlite3_get_autocommit db]
} {
do_test $testname.$n.5 {
set bt [btree_from_db db]
db_enter db
array set stats [btree_pager_stats $bt]
db_leave db
set stats(state)
} 0
}
}
# If an IO error occurred, then the checksum of the database should
# be the same as before the script that caused the IO error was run.
#
if {$::go && $::sqlite_io_error_hardhit && $::ioerropts(-cksum)} {
do_test $testname.$n.6 {
catch {db close}
catch {db2 close}
set ::DB [sqlite3 db test.db; sqlite3_connection_pointer db]
set nowcksum [cksum]
set res [expr {$nowcksum==$::checksum || $nowcksum==$::goodcksum}]
if {$res==0} {
output2 "now=$nowcksum"
output2 "the=$::checksum"
output2 "fwd=$::goodcksum"
}
set res
} 1
}
set ::sqlite_io_error_hardhit 0
set ::sqlite_io_error_pending 0
if {[info exists ::ioerropts(-cleanup)]} {
catch $::ioerropts(-cleanup)
}
}
set ::sqlite_io_error_pending 0
set ::sqlite_io_error_persist 0
unset ::ioerropts
}
# Return a checksum based on the contents of the main database associated
# with connection $db
#
proc cksum {{db db}} {
set txt [$db eval {
SELECT name, type, sql FROM sqlite_master order by name
}]\n
foreach tbl [$db eval {
SELECT name FROM sqlite_master WHERE type='table' order by name
}] {
append txt [$db eval "SELECT * FROM $tbl"]\n
}
foreach prag {default_synchronous default_cache_size} {
append txt $prag-[$db eval "PRAGMA $prag"]\n
}
set cksum [string length $txt]-[md5 $txt]
# puts $cksum-[file size test.db]
return $cksum
}
# Generate a checksum based on the contents of the main and temp tables
# database $db. If the checksum of two databases is the same, and the
# integrity-check passes for both, the two databases are identical.
#
proc allcksum {{db db}} {
set ret [list]
ifcapable tempdb {
set sql {
SELECT name FROM sqlite_master WHERE type = 'table' UNION
SELECT name FROM sqlite_temp_master WHERE type = 'table' UNION
SELECT 'sqlite_master' UNION
SELECT 'sqlite_temp_master' ORDER BY 1
}
} else {
set sql {
SELECT name FROM sqlite_master WHERE type = 'table' UNION
SELECT 'sqlite_master' ORDER BY 1
}
}
set tbllist [$db eval $sql]
set txt {}
foreach tbl $tbllist {
append txt [$db eval "SELECT * FROM $tbl"]
}
foreach prag {default_cache_size} {
append txt $prag-[$db eval "PRAGMA $prag"]\n
}
# puts txt=$txt
return [md5 $txt]
}
# Generate a checksum based on the contents of a single database with
# a database connection. The name of the database is $dbname.
# Examples of $dbname are "temp" or "main".
#
proc dbcksum {db dbname} {
if {$dbname=="temp"} {
set master sqlite_temp_master
} else {
set master $dbname.sqlite_master
}
set alltab [$db eval "SELECT name FROM $master WHERE type='table'"]
set txt [$db eval "SELECT * FROM $master"]\n
foreach tab $alltab {
append txt [$db eval "SELECT * FROM $dbname.$tab"]\n
}
return [md5 $txt]
}
proc memdebug_log_sql {{filename mallocs.sql}} {
set data [sqlite3_memdebug_log dump]
set nFrame [expr [llength [lindex $data 0]]-2]
if {$nFrame < 0} { return "" }
set database temp
set tbl "CREATE TABLE ${database}.malloc(zTest, nCall, nByte, lStack);"
set sql ""
foreach e $data {
set nCall [lindex $e 0]
set nByte [lindex $e 1]
set lStack [lrange $e 2 end]
append sql "INSERT INTO ${database}.malloc VALUES"
append sql "('test', $nCall, $nByte, '$lStack');\n"
foreach f $lStack {
set frames($f) 1
}
}
set tbl2 "CREATE TABLE ${database}.frame(frame INTEGER PRIMARY KEY, line);\n"
set tbl3 "CREATE TABLE ${database}.file(name PRIMARY KEY, content);\n"
foreach f [array names frames] {
set addr [format %x $f]
set cmd "addr2line -e [info nameofexec] $addr"
set line [eval exec $cmd]
append sql "INSERT INTO ${database}.frame VALUES($f, '$line');\n"
set file [lindex [split $line :] 0]
set files($file) 1
}
foreach f [array names files] {
set contents ""
catch {
set fd [open $f]
set contents [read $fd]
close $fd
}
set contents [string map {' ''} $contents]
append sql "INSERT INTO ${database}.file VALUES('$f', '$contents');\n"
}
set fd [open $filename w]
puts $fd "BEGIN; ${tbl}${tbl2}${tbl3}${sql} ; COMMIT;"
close $fd
}
# Drop all tables in database [db]
proc drop_all_tables {{db db}} {
ifcapable trigger&&foreignkey {
set pk [$db one "PRAGMA foreign_keys"]
$db eval "PRAGMA foreign_keys = OFF"
}
foreach {idx name file} [db eval {PRAGMA database_list}] {
if {$idx==1} {
set master sqlite_temp_master
} else {
set master $name.sqlite_master
}
foreach {t type} [$db eval "
SELECT name, type FROM $master
WHERE type IN('table', 'view') AND name NOT LIKE 'sqliteX_%' ESCAPE 'X'
"] {
$db eval "DROP $type \"$t\""
}
}
ifcapable trigger&&foreignkey {
$db eval "PRAGMA foreign_keys = $pk"
}
}
# Drop all auxiliary indexes from the main database opened by handle [db].
#
proc drop_all_indexes {{db db}} {
set L [$db eval {
SELECT name FROM sqlite_master WHERE type='index' AND sql LIKE 'create%'
}]
foreach idx $L { $db eval "DROP INDEX $idx" }
}
#-------------------------------------------------------------------------
# If a test script is executed with global variable $::G(perm:name) set to
# "wal", then the tests are run in WAL mode. Otherwise, they should be run
# in rollback mode. The following Tcl procs are used to make this less
# intrusive:
#
# wal_set_journal_mode ?DB?
#
# If running a WAL test, execute "PRAGMA journal_mode = wal" using
# connection handle DB. Otherwise, this command is a no-op.
#
# wal_check_journal_mode TESTNAME ?DB?
#
# If running a WAL test, execute a tests case that fails if the main
# database for connection handle DB is not currently a WAL database.
# Otherwise (if not running a WAL permutation) this is a no-op.
#
# wal_is_wal_mode
#
# Returns true if this test should be run in WAL mode. False otherwise.
#
proc wal_is_wal_mode {} {
expr {[permutation] eq "wal"}
}
proc wal_set_journal_mode {{db db}} {
if { [wal_is_wal_mode] } {
$db eval "PRAGMA journal_mode = WAL"
}
}
proc wal_check_journal_mode {testname {db db}} {
if { [wal_is_wal_mode] } {
$db eval { SELECT * FROM sqlite_master }
do_test $testname [list $db eval "PRAGMA main.journal_mode"] {wal}
}
}
proc wal_is_capable {} {
ifcapable !wal { return 0 }
if {[permutation]=="journaltest"} { return 0 }
return 1
}
proc permutation {} {
set perm ""
catch {set perm $::G(perm:name)}
set perm
}
proc presql {} {
set presql ""
catch {set presql $::G(perm:presql)}
set presql
}
proc isquick {} {
set ret 0
catch {set ret $::G(isquick)}
set ret
}
#-------------------------------------------------------------------------
#
proc slave_test_script {script} {
# Create the interpreter used to run the test script.
interp create tinterp
# Populate some global variables that tester.tcl expects to see.
foreach {var value} [list \
::argv0 $::argv0 \
::argv {} \
::SLAVE 1 \
] {
interp eval tinterp [list set $var $value]
}
# If output is being copied into a file, share the file-descriptor with
# the interpreter.
if {[info exists ::G(output_fd)]} {
interp share {} $::G(output_fd) tinterp
}
# The alias used to access the global test counters.
tinterp alias set_test_counter set_test_counter
# Set up the ::cmdlinearg array in the slave.
interp eval tinterp [list array set ::cmdlinearg [array get ::cmdlinearg]]
# Set up the ::G array in the slave.
interp eval tinterp [list array set ::G [array get ::G]]
# Load the various test interfaces implemented in C.
load_testfixture_extensions tinterp
# Run the test script.
interp eval tinterp $script
# Check if the interpreter call [run_thread_tests]
if { [interp eval tinterp {info exists ::run_thread_tests_called}] } {
set ::run_thread_tests_called 1
}
# Delete the interpreter used to run the test script.
interp delete tinterp
}
proc slave_test_file {zFile} {
set tail [file tail $zFile]
if {[info exists ::G(start:permutation)]} {
if {[permutation] != $::G(start:permutation)} return
unset ::G(start:permutation)
}
if {[info exists ::G(start:file)]} {
if {$tail != $::G(start:file) && $tail!="$::G(start:file).test"} return
unset ::G(start:file)
}
# Remember the value of the shared-cache setting. So that it is possible
# to check afterwards that it was not modified by the test script.
#
ifcapable shared_cache { set scs [sqlite3_enable_shared_cache] }
# Run the test script in a slave interpreter.
#
unset -nocomplain ::run_thread_tests_called
reset_prng_state
set ::sqlite_open_file_count 0
set time [time { slave_test_script [list source $zFile] }]
set ms [expr [lindex $time 0] / 1000]
# Test that all files opened by the test script were closed. Omit this
# if the test script has "thread" in its name. The open file counter
# is not thread-safe.
#
if {[info exists ::run_thread_tests_called]==0} {
do_test ${tail}-closeallfiles { expr {$::sqlite_open_file_count>0} } {0}
}
set ::sqlite_open_file_count 0
# Test that the global "shared-cache" setting was not altered by
# the test script.
#
ifcapable shared_cache {
set res [expr {[sqlite3_enable_shared_cache] == $scs}]
do_test ${tail}-sharedcachesetting [list set {} $res] 1
}
# Add some info to the output.
#
output2 "Time: $tail $ms ms"
show_memstats
}
# Open a new connection on database test.db and execute the SQL script
# supplied as an argument. Before returning, close the new conection and
# restore the 4 byte fields starting at header offsets 28, 92 and 96
# to the values they held before the SQL was executed. This simulates
# a write by a pre-3.7.0 client.
#
proc sql36231 {sql} {
set B [hexio_read test.db 92 8]
set A [hexio_read test.db 28 4]
sqlite3 db36231 test.db
catch { db36231 func a_string a_string }
execsql $sql db36231
db36231 close
hexio_write test.db 28 $A
hexio_write test.db 92 $B
return ""
}
proc db_save {} {
foreach f [glob -nocomplain sv_test.db*] { forcedelete $f }
foreach f [glob -nocomplain test.db*] {
set f2 "sv_$f"
forcecopy $f $f2
}
}
proc db_save_and_close {} {
db_save
catch { db close }
return ""
}
proc db_restore {} {
foreach f [glob -nocomplain test.db*] { forcedelete $f }
foreach f2 [glob -nocomplain sv_test.db*] {
set f [string range $f2 3 end]
forcecopy $f2 $f
}
}
proc db_restore_and_reopen {{dbfile test.db}} {
catch { db close }
db_restore
sqlite3 db $dbfile
}
proc db_delete_and_reopen {{file test.db}} {
catch { db close }
foreach f [glob -nocomplain test.db*] { forcedelete $f }
sqlite3 db $file
}
# Close any connections named [db], [db2] or [db3]. Then use sqlite3_config
# to configure the size of the PAGECACHE allocation using the parameters
# provided to this command. Save the old PAGECACHE parameters in a global
# variable so that [test_restore_config_pagecache] can restore the previous
# configuration.
#
# Before returning, reopen connection [db] on file test.db.
#
proc test_set_config_pagecache {sz nPg} {
catch {db close}
catch {db2 close}
catch {db3 close}
sqlite3_shutdown
set ::old_pagecache_config [sqlite3_config_pagecache $sz $nPg]
sqlite3_initialize
autoinstall_test_functions
reset_db
}
# Close any connections named [db], [db2] or [db3]. Then use sqlite3_config
# to configure the size of the PAGECACHE allocation to the size saved in
# the global variable by an earlier call to [test_set_config_pagecache].
#
# Before returning, reopen connection [db] on file test.db.
#
proc test_restore_config_pagecache {} {
catch {db close}
catch {db2 close}
catch {db3 close}
sqlite3_shutdown
eval sqlite3_config_pagecache $::old_pagecache_config
unset ::old_pagecache_config
sqlite3_initialize
autoinstall_test_functions
sqlite3 db test.db
}
proc test_find_binary {nm} {
if {$::tcl_platform(platform)=="windows"} {
set ret "$nm.exe"
} else {
set ret $nm
}
set ret [file normalize [file join $::cmdlinearg(TESTFIXTURE_HOME) $ret]]
if {![file executable $ret]} {
finish_test
return ""
}
return $ret
}
# Find the name of the 'shell' executable (e.g. "sqlite3.exe") to use for
# the tests in shell[1-5].test. If no such executable can be found, invoke
# [finish_test ; return] in the callers context.
#
proc test_find_cli {} {
set prog [test_find_binary sqlite3]
if {$prog==""} { return -code return }
return $prog
}
# Find the name of the 'sqldiff' executable (e.g. "sqlite3.exe") to use for
# the tests in sqldiff tests. If no such executable can be found, invoke
# [finish_test ; return] in the callers context.
#
proc test_find_sqldiff {} {
set prog [test_find_binary sqldiff]
if {$prog==""} { return -code return }
return $prog
}
# If the library is compiled with the SQLITE_DEFAULT_AUTOVACUUM macro set
# to non-zero, then set the global variable $AUTOVACUUM to 1.
set AUTOVACUUM $sqlite_options(default_autovacuum)
# Make sure the FTS enhanced query syntax is disabled.
set sqlite_fts3_enable_parentheses 0
# During testing, assume that all database files are well-formed. The
# few test cases that deliberately corrupt database files should rescind
# this setting by invoking "database_can_be_corrupt"
#
database_never_corrupt
source $testdir/thread_common.tcl
source $testdir/malloc_common.tcl
Reference in New Issue View Git Blame Copy Permalink