Test plan: Open the cred explorer, and try clicking the + signs. They
will expand a recursive table showing the neighbor nodes and their cred.
Paired with @wchargin
`PagerankTable` is forked from `ContributionList`.
Test plan: I took it for a spin and it seemed OK. I'm not inclined to
write formal tests because we are in rapid prototyping mode stil.
Test Plan:
Load the cred explorer for the first time to see two empty boxes.
Refresh to see the same thing. Then, add some content to each box.
Refresh and see the same content.
wchargin-branch: cred-explorer-localstorage
This re-organizes the GitHub porcelain tests to be:
- organized by each method signature, rather than having blocks that
test many different methods on each wrapper
- make extensive use of snapshot tests for convenience
Test plan: Inspect the new unit tests, and the corresponding snapshots.
It should be relatively easy to do this because you can copy+paste the
urls to verify the properties.
Summary:
This fixes two problems in the previous version:
- A new JS file not checked into git, but with a `@flow` directive,
would cause `ensure-flow` to fail, because one list of files was
from `git grep` and the other was from `find`.
- Only the hard-coded directories `src config scripts` were searched.
Now, we search all JS files checked into Git, except for some hard-coded
exceptions, namely `flow-typed`.
Test Plan:
1. Add `foo.js`, not checked into Git. Note that `ensure-flow` passes.
2. Add `@flow` to `foo.js`, and note that `ensure-flow` still passes.
3. Remove `@flow` from `.eslintrc.js`, and note that `ensure-flow`
fails and nicely prints the filename. (Note: this file is at the
repository root.)
4. Create a file `echo stuff >$'naughty\nfilename.js'`, and note that
`ensure-flow` has the correct behavior in both positive and
negative cases.
wchargin-branch: ensure-flow-improvements
Summary:
Even though it’s not really a source file, and it lives at the
repository root, it might as well have typing to make sure that we don’t
do anything really dumb.
Test Plan:
`yarn flow` still passes.
wchargin-branch: flow-eslintrc
Test plan: Unit tests were added.
(Note: I haven't tested the error case, when there are an invalid number
of parents. I think this is OK for now, but I'm disclosing this so
reviewers can easily take issue with it. I'm planning to re-organize the
test code to be by method rather than by wrapper type (so the wrappers
section doesn't keep being a kitchen sink) and will hopefully
put that test in.)
Also updates the GitHub porcelain.
Existing observable behavior is unchanged, except that performance may
be improved for issueOrPrByNumber.
A bug that would afflict a multi-repository graph (namely, that calling
`repo.issues()` would get all issues for all repositories) is
pre-emptively removed. No test cases were added as we do not yet support
multi-repository graphs.
Test plan: existing unit test coverage is sufficient.
Currently, the `authors` method is attached at the Repository level.
This is incorrect; it actually finds all the authors in the graph, not
all the authors of that repository. This commit moves the method to the
correct class.
Test plan: This function is only used in test code. The tests still
pass.
Summary:
We don’t expect the results to be of good quality right now. Rather,
this gives us a starting point from which to iterate the algorithm.
The convergence criterion also needs to be adjusted. (In particular, it
should almost certainly not be a constant.)
Test Plan:
Run `yarn start`. Select a graph, like `sourcecred/example-github`. Open
the JS console and click “Run basic PageRank”. Watch the console.
wchargin-branch: basic-pagerank
Summary:
This commit enables the cred explorer to fetch pre-generated graphs. The
form has poor UX, but gets the job done. (To do later: saving in
localStorage, allowing fetching the list of possible graphs, linking the
submit button so that it’s triggered by `Enter`, etc.).
Test Plan:
Set up with `node ./bin/sourcecred.js graph sourcecred sourcecred`, then
run `yarn start` and check the following cases:
- success case: `sourcecred`/`sourcecred`
- error case: `sarcecrod`/`sarcecrod` (nice console error)
- error case: the repository owner or name is an empty string or has
invalid characters, like `../../secret.txt` (nice console error)
wchargin-branch: fetch-graphs
Summary:
This commit changes `yarn start` to run a production version of the API
server, which serves static files from a pre-built directory and also
handles API requests.
Test Plan:
```shell
$ yarn build
$ yarn backend
$ node ./bin/sourcecred.js start -d /tmp/srccrd &
$ mkdir -p /tmp/srccrd
$ echo hello >/tmp/srccrd/world
$ curl -s localhost:4000/ | file -
/dev/stdin: HTML document, ASCII text, with very long lines, with no line terminators
$ curl -s localhost:4000/api/v1/data/world
hello
```
wchargin-branch: cli-start-prod-server
Test plan: Run `yarn start`, and observe that the Cred Explorer is now
included in the nav bar, and can be selected, in which case a short
message is displayed.
testUtil contains some useful configuration endpoints for our frontend
testing. This commit moves it out of the artifact editor and up to
`src/app`.
Test plan: `yarn travis` passes.
@wchargin suggested that the entity-wrapping logic in porcelain
reference handling should be factored out as its own method. This was a
great suggestion; it will be very useful for plugin consumers, and it
also results in better test coverage.
Test plan: The new unit tests are nice. For your own safety, do not
question or quibble with the magnificent foo plugin.
Summary:
This way, our frontend can talk to a backend that can read from the
filesystem (among other things).
Paired with @decentralion.
Test Plan:
```
$ yarn backend
$ SOURCECRED_DIRECTORY=/tmp/srccrd yarn start
$ # verify that the browser looks good
$ mkdir /tmp/srccrd
$ echo hello >/tmp/srccrd/world
$ curl localhost:3000/api/v1/data/world
hello
$ curl localhost:4000/api/v1/data/world
hello
```
wchargin-branch: webpack-proxy
It was doing some clever array construction that added possible booleans
to the array, then filtered them out. To make the typing simpler for
Flow's inspection, we now only put string elements in the array.
Test plan: `yarn travis --full` passed, and the CLI still works.
Summary:
- The value of `process.stdout.isTTY` is either `true` or `undefined`.
Flow (reasonably) dislikes this, so we add an explicit check.
- More `package.json` burnination.
Test Plan:
Note that `require("./package.json").proxy === undefined` in the Node
console, and that `yarn start` works.
wchargin-branch: flow--scripts-start
- scripts/backend.js: We incorrectly set an environment variable to
a boolean, when in fact it must be a string. Fixed it to set a string
value "true", and updated usage in config/babel.js
- scripts/test.js: No changes
- scripts/build.js: Removed a call to printHostingInstructions, so that
we don't need to require the package.json.
Test plan:
`yarn travis --full` passes, and the SourceCred cli still works.
Fixing the flow error corresponded to (correctly) documenting that the
GitHub token is mandatory, not optional.
Test plan: `yarn travis --full` still passes.
- Fix accidental string-to-NaN coercion in ensureSlash
- Don't dynamically require package.json; to determine public url, just
use the environment variable or "/"
Test plan: `yarn start` and travis still work
Summary:
This way, different plugins can have `LocalStore`s with different cache
keys.
Test Plan:
Note that the app (`yarn start`) preserves the local store values from
before this change, and that updates continue to work.
wchargin-branch: generic-localstore
This commit modifies App.js to use routing, such that it's possible to
navigate between a home screen, and the Artifact Editor.
Test plan: Run `yarn start`, and navigate between the home screen and
artifact editor. Verify that the artifact editor still works as
expected.
This commit adds src/app/App.js, which proxies in the frontend from
src/plugins/artifact/editor/App.js. The observed behavior (run `yarn
start`; see Artifact Editor) is unchanged.
Test plan: Observe that `yarn start` has the same behavior, and travis
passes.
This commit executes a micro-refactor to move all top-level app setup
code out of src/plugins/artifact/editor and into src/app. The observed
behavior from `yarn start`, which is to show the artifact editor, is
unchanged.
Summary:
We need a way for our web applications to interact with data on the
filesystem. In this commit, we introduce a webserver that serves
statically from two directory trees: first, the result of a live-updated
Webpack build; second, the SourceCred data directory.
Test Plan:
Run `yarn backend` and `node ./bin/sourcecred.js start`. When ready,
navigate to the server’s root route in a web browser. Note that a nice
React app is displayed. Then, change something in that React app source.
Note that the server console displays Webpack’s update messages, and
that refreshing the page in the browser renders the new version of the
app. Finally, visit
/__data__/graphs/sourcecred/example-github/graph.json
in the browser to see the graph for the example repository, assuming
that you had generated its graph previously.
wchargin-branch: start
This script ensures that either //@flow or //@no-flow is present in
every js file. Every existing js file that would fail this check has
been given //@no-flow, we should work to remove all of these in the
future.
Test plan:
I verified that `yarn travis` fails before fixing the other js files,
and passes afterwards.
Now that we have repository nodes (#171), it makes sense that the Github
porcelain should provide a way to wrap the entire graph, and provide
easy access for the various repositories. This adds a `Porcelain` class
to fulfill that need.
The `Porcelain` is very straightforward: it takes in the whole graph,
and gives a way to get all the Repositories, or to request a particular
Repository by owner/name. In the odd case wherein a graph contains
multiple repository nodes with the same owner and name, an error is
thrown. Per standard JS map semantics (bleh), it can return undefined if
there is no matching repository.
Test plan:
See that the unit tests now use the standard behavior, and a test
verifies behavior for non-existant repositories. I don't have a test
case where there are multiple repo nodes, but that itself would be an
error, so throwing an error in that case is just defensive programming.
This commit creates a new node type in the GitHub graph: the REPOSITORY
node. The REPOSITORY node has the following payload properties:
- url (string)
- name (string)
- owner (string)
Things this commit does:
- Add new node type and payload type (RepositoryNodePayload)
- Update parser to instantiate the new node type
- Update api.js to have Repository wrap the new node type (thus
Repository is a GitHub entity)
- Update snapshots
- Update users of GitHub node types to ensure they are exhaustive
Things that will come in a followon commit:
- Add CONTAINS edges from the repository to all its PRs and Issues
- Update the Repository porcelain to use those edges, rather than
scanning the graph for every possible Issue/PR (eventually those might
belong to other Repositories)
- Create a GitHubGraph abstraction in the porcelain, which makes it easy
to find all of the Repositories in a graph
Note that retrieving the repository owner technically involved fetching
the whole owner representation (as a GitHub user). I could have chosen
to add that user to the graph, with a "OWNS" edge pointing to the
repository. For simplicity's sake, I've declined to do that, and instead
just parse the owner's name directly.
Test plan:
Added tests to verify that the Repository porcelain entity has the right
properties. Combined with the snapshot tests, that should be sufficient.
When a GitHub user delete their account, all of their comments remain,
but with a `null` author. Previously, our code did not account for this
possibility. Now it does (by simply not adding an AUTHORSHIP edge).
Conveniently, our porcelain API already represents authors as a list, so
this doesn't require any change in porcelain API usage.
Test plan:
I did not add any unit tests, simply because
creating-and-deleting a GitHub user to make a repro seemed like a bit of
a pain. However, it is very unlikely that this bug will re-occur,
because the nullability of AuthorJSON is now enforced at the type level
inside graphql.js.
Also, running `node bin/sourcecred.js src-d go-git` now succeedsinstead
of failing.
Summary:
This solves two problems:
1. The “output directory” argument to `sourcecred graph` is also the
input directory to other commands, like `sourcecred analyze`
(hypothetically). In such cases, it would be nice for the flag to
have the same name, but clearly `--output-directory` does not always
make sense.
2. In addition to storing graphs, we’ll need to store other kinds of
data: settings, intermediate data for plugins to cache results, etc.
We should store these under a single umbrella.
With both of these problems in mind, it makes sense to create a
`SOURCECRED_DIRECTORY` flag under which we store all relevant data.
Test Plan:
Run:
```shell
$ yarn backend
$ node bin/sourcecred.js help graph
$ node bin/sourcecred.js graph sourcecred example-github
$ node bin/sourcecred.js graph sourcecred example-github -d /tmp/sorcecrod
$ SOURCECRED_DIRECTORY=/tmp/srccrd node bin/sourcecred.js graph sourcecred example-github
$ for dir in /tmp/{sourcecred,sorcecrod,srccrd}; do find "${dir}"; done
```
wchargin-branch: graph-directory
Our SourceCred CLI tool now ipmlements printCombinedGraph and
cloneAndPrintGitGraph, but with more principled implementations and
interfaces :)
Test plan:
`yarn travis --full` passes, so I didn't delete any needed test infra.
Previously, if a CLI command had an unhandled promise rejection, this
would result in a spurious success and zero exit value.
This commit causes all of our CLI commands to instead fail if they have
an unhandled promise rejection.
Test plan: Previously, `sourcecred graph src-d go-git` would claim to
succeed, although it actually fails due to an unrelated bug. After this
change is applied, it correctly fails to retrieve the GitHub graph (and
hte combine step is never run).
This commit pulls new information from GitHub about the url, name, and
owner of a GitHub repository. Part of #171.
Test plan: example-github-repo.json has been updated. `yarn travis
--full` passes. This should be sufficient.
Currently, we generate a `RepositoryJSON` object via querying GitHub.
That `RepositoryJSON` object has a `repository` field... which is weird,
and suggests we got the names slightly wrong.
This commit renames the top-level response to `GithubResponseJSON`, and
factors the `repository` field out as `RepositoryJSON`. Correspondingly,
the `addData` and `addRepository` methods on the parser are now
distinct.
This is a precursor for #171.
Test plan: This is a simple refactor; the fact that yarn travis passes
should be sufficient.
Dandelion Mané
William Chargin