Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
// @flow
|
|
|
|
|
|
2018-09-05 19:28:27 +00:00
|
|
|
const tmp = require("tmp");
|
|
|
|
|
|
2018-09-05 05:01:22 +00:00
|
|
|
const execDependencyGraph = require("../src/tools/execDependencyGraph");
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
|
2018-05-04 22:47:26 +00:00
|
|
|
main();
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
|
|
|
|
|
function main() {
|
|
|
|
|
const mode =
|
|
|
|
|
process.env["TRAVIS_EVENT_TYPE"] === "cron" ||
|
|
|
|
|
process.argv.includes("--full")
|
|
|
|
|
? "FULL"
|
|
|
|
|
: "BASIC";
|
2018-05-04 22:47:26 +00:00
|
|
|
execDependencyGraph(makeTasks(mode)).then(({success}) => {
|
|
|
|
|
process.exitCode = success ? 0 : 1;
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
});
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
function makeTasks(mode /*: "BASIC" | "FULL" */) {
|
2018-09-05 19:47:54 +00:00
|
|
|
const backendOutput = tmp.dirSync({
|
|
|
|
|
unsafeCleanup: true,
|
|
|
|
|
prefix: "sourcecred-test-",
|
|
|
|
|
}).name;
|
|
|
|
|
console.log("tmpdir for backend output: " + backendOutput);
|
|
|
|
|
|
|
|
|
|
function withSourcecredBinEnv(
|
|
|
|
|
invocation /*: $ReadOnlyArray<string> */
|
|
|
|
|
) /*: string[] */ {
|
|
|
|
|
return ["env", "SOURCECRED_BIN=" + backendOutput, ...invocation];
|
|
|
|
|
}
|
|
|
|
|
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
const basicTasks = [
|
2018-05-08 03:02:19 +00:00
|
|
|
{
|
|
|
|
|
id: "ensure-flow-typing",
|
|
|
|
|
cmd: ["./scripts/ensure-flow.sh"],
|
|
|
|
|
deps: [],
|
2018-05-26 02:27:31 +00:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
// eslint-disable-next-line no-useless-concat
|
|
|
|
|
id: "check-stop" + "ships",
|
|
|
|
|
// eslint-disable-next-line no-useless-concat
|
|
|
|
|
cmd: ["./scripts/check-stop" + "ships.sh"],
|
|
|
|
|
deps: [],
|
2018-05-08 03:02:19 +00:00
|
|
|
},
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
{
|
|
|
|
|
id: "check-pretty",
|
2018-05-03 02:10:37 +00:00
|
|
|
cmd: ["npm", "run", "--silent", "check-pretty"],
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
deps: [],
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
id: "lint",
|
2018-05-03 02:10:37 +00:00
|
|
|
cmd: ["npm", "run", "--silent", "lint"],
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
deps: [],
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
id: "flow",
|
2018-05-29 20:56:36 +00:00
|
|
|
cmd: [
|
|
|
|
|
"npm",
|
|
|
|
|
"run",
|
|
|
|
|
"--silent",
|
|
|
|
|
"flow",
|
|
|
|
|
"--",
|
|
|
|
|
"--quiet",
|
|
|
|
|
"--max-warnings=0",
|
|
|
|
|
],
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
deps: [],
|
|
|
|
|
},
|
|
|
|
|
{
|
2018-07-31 17:53:10 +00:00
|
|
|
id: "unit",
|
test: invoke Jest in CI mode (#803)
Summary:
CI mode prevents Jest from automatically writing snapshots, and also
causes obsolete snapshots to be an error instead of a warning. This is
consistent with the behavior on Travis, where the `CI=1` environment
variable is set. It should thus be the default when running `yarn test`
(but not `yarn unit`).
Test Plan:
Add a file `src/foo.test.js`:
```js
// @flow
describe("foo", () => {
it("bar", () => {
expect("baz").toMatchSnapshot();
});
});
```
Note that `yarn test` fails with the message, “new snapshot was not
written”.
Revert this change, then re-run `yarn test`; note that it passes,
writing a snapshot.
Then, reinstate this change and delete `src/foo.test.js`. Note that
running `yarn test` fails, due to an obsolete snapshot. Revert the
change again, and watch `yarn test` pass despite the obsolete snapshot.
Finally, remove the snapshot. :-)
wchargin-branch: test-jest-ci
2018-09-07 03:45:16 +00:00
|
|
|
cmd: ["npm", "run", "--silent", "unit", "--", "--ci"],
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
deps: [],
|
|
|
|
|
},
|
Add `sharness` for shell-based testing (#597)
Summary:
We will shortly want to perform testing of shell scripts; it makes the
most sense to do so via the shell. We could roll our own testing
framework, but it makes more sense to use an existing one. By choosing
Sharness, we’re in good company: `go-ipfs` and `go-multihash` use it as
well, and it’s derived from Git’s testing library. I like it a lot.
For now, we need a dummy test file; our test runner will fail if there
are no tests to run. As soon as we have a real test, we can remove this.
This commit was generated by following the “per-project installation”
instructions at https://github.com/chriscool/sharness, and by
additionally including that repository’s `COPYING` file as
`SHARNESS_LICENSE`, with a header prepended. I considered instead adding
Sharness as a submodule, which is supported and has clear advantages
(e.g., you can update the thing), but opted to avoid the complexity of
submodules for now.
Test Plan:
Create the following tests in the `sharness` directory:
```shell
$ cat sharness/good.t
#!/bin/sh
test_description='demo of passing tests'
. ./sharness.sh
test_expect_success "look at me go" true
test_expect_success EXPENSIVE "this may take a while" 'sleep 2'
test_done
# vim: ft=sh
$ cat sharness/bad.t
#!/bin/sh
test_description='demo of failing tests'
. ./sharness.sh
test_expect_success "I don't feel so good" false
test_done
# vim: ft=sh
```
Note that `yarn sharness` and `yarn test` fail appropriately. Note that
`yarn sharness-full` fails appropriately after taking two extra seconds,
and `yarn test --full` runs the latter. Each failure message should
print the name of the failing test case, not just the suite name, and
should indicate that the passing tests passed.
Then, remove `sharness/bad.t`, and note that the above commands all
pass, with the `--full` variants still taking longer.
Finally, remove `sharness/good.t`, and note that the above commands all
pass (and all pass quickly).
wchargin-branch: add-sharness
2018-08-06 19:56:25 +00:00
|
|
|
{
|
2018-09-05 19:47:54 +00:00
|
|
|
id: "backend",
|
Add `sharness` for shell-based testing (#597)
Summary:
We will shortly want to perform testing of shell scripts; it makes the
most sense to do so via the shell. We could roll our own testing
framework, but it makes more sense to use an existing one. By choosing
Sharness, we’re in good company: `go-ipfs` and `go-multihash` use it as
well, and it’s derived from Git’s testing library. I like it a lot.
For now, we need a dummy test file; our test runner will fail if there
are no tests to run. As soon as we have a real test, we can remove this.
This commit was generated by following the “per-project installation”
instructions at https://github.com/chriscool/sharness, and by
additionally including that repository’s `COPYING` file as
`SHARNESS_LICENSE`, with a header prepended. I considered instead adding
Sharness as a submodule, which is supported and has clear advantages
(e.g., you can update the thing), but opted to avoid the complexity of
submodules for now.
Test Plan:
Create the following tests in the `sharness` directory:
```shell
$ cat sharness/good.t
#!/bin/sh
test_description='demo of passing tests'
. ./sharness.sh
test_expect_success "look at me go" true
test_expect_success EXPENSIVE "this may take a while" 'sleep 2'
test_done
# vim: ft=sh
$ cat sharness/bad.t
#!/bin/sh
test_description='demo of failing tests'
. ./sharness.sh
test_expect_success "I don't feel so good" false
test_done
# vim: ft=sh
```
Note that `yarn sharness` and `yarn test` fail appropriately. Note that
`yarn sharness-full` fails appropriately after taking two extra seconds,
and `yarn test --full` runs the latter. Each failure message should
print the name of the failing test case, not just the suite name, and
should indicate that the passing tests passed.
Then, remove `sharness/bad.t`, and note that the above commands all
pass, with the `--full` variants still taking longer.
Finally, remove `sharness/good.t`, and note that the above commands all
pass (and all pass quickly).
wchargin-branch: add-sharness
2018-08-06 19:56:25 +00:00
|
|
|
cmd: [
|
|
|
|
|
"npm",
|
|
|
|
|
"run",
|
|
|
|
|
"--silent",
|
2018-09-05 19:47:54 +00:00
|
|
|
"backend",
|
|
|
|
|
"--",
|
|
|
|
|
"--output-path",
|
|
|
|
|
backendOutput,
|
Add `sharness` for shell-based testing (#597)
Summary:
We will shortly want to perform testing of shell scripts; it makes the
most sense to do so via the shell. We could roll our own testing
framework, but it makes more sense to use an existing one. By choosing
Sharness, we’re in good company: `go-ipfs` and `go-multihash` use it as
well, and it’s derived from Git’s testing library. I like it a lot.
For now, we need a dummy test file; our test runner will fail if there
are no tests to run. As soon as we have a real test, we can remove this.
This commit was generated by following the “per-project installation”
instructions at https://github.com/chriscool/sharness, and by
additionally including that repository’s `COPYING` file as
`SHARNESS_LICENSE`, with a header prepended. I considered instead adding
Sharness as a submodule, which is supported and has clear advantages
(e.g., you can update the thing), but opted to avoid the complexity of
submodules for now.
Test Plan:
Create the following tests in the `sharness` directory:
```shell
$ cat sharness/good.t
#!/bin/sh
test_description='demo of passing tests'
. ./sharness.sh
test_expect_success "look at me go" true
test_expect_success EXPENSIVE "this may take a while" 'sleep 2'
test_done
# vim: ft=sh
$ cat sharness/bad.t
#!/bin/sh
test_description='demo of failing tests'
. ./sharness.sh
test_expect_success "I don't feel so good" false
test_done
# vim: ft=sh
```
Note that `yarn sharness` and `yarn test` fail appropriately. Note that
`yarn sharness-full` fails appropriately after taking two extra seconds,
and `yarn test --full` runs the latter. Each failure message should
print the name of the failing test case, not just the suite name, and
should indicate that the passing tests passed.
Then, remove `sharness/bad.t`, and note that the above commands all
pass, with the `--full` variants still taking longer.
Finally, remove `sharness/good.t`, and note that the above commands all
pass (and all pass quickly).
wchargin-branch: add-sharness
2018-08-06 19:56:25 +00:00
|
|
|
],
|
|
|
|
|
deps: [],
|
|
|
|
|
},
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
{
|
2018-09-05 19:47:54 +00:00
|
|
|
id: {BASIC: "sharness", FULL: "sharness-full"}[mode],
|
|
|
|
|
cmd: withSourcecredBinEnv([
|
2018-09-05 19:28:27 +00:00
|
|
|
"npm",
|
|
|
|
|
"run",
|
|
|
|
|
"--silent",
|
2018-09-05 19:47:54 +00:00
|
|
|
{BASIC: "sharness", FULL: "sharness-full"}[mode],
|
|
|
|
|
]),
|
|
|
|
|
deps: ["backend"],
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
},
|
2018-05-03 05:16:48 +00:00
|
|
|
];
|
|
|
|
|
const extraTasks = [
|
2018-06-12 01:57:37 +00:00
|
|
|
{
|
2018-06-30 23:01:54 +00:00
|
|
|
id: "fetchGithubRepoTest",
|
2018-09-05 19:47:54 +00:00
|
|
|
cmd: withSourcecredBinEnv([
|
|
|
|
|
"./src/plugins/github/fetchGithubRepoTest.sh",
|
|
|
|
|
"--no-build",
|
|
|
|
|
]),
|
|
|
|
|
deps: ["backend"],
|
2018-06-12 01:57:37 +00:00
|
|
|
},
|
2018-06-20 22:28:37 +00:00
|
|
|
{
|
2018-06-30 23:01:54 +00:00
|
|
|
id: "loadRepositoryTest",
|
2018-09-05 19:47:54 +00:00
|
|
|
cmd: withSourcecredBinEnv([
|
|
|
|
|
"./src/plugins/git/loadRepositoryTest.sh",
|
|
|
|
|
"--no-build",
|
|
|
|
|
]),
|
|
|
|
|
deps: ["backend"],
|
2018-06-20 22:28:37 +00:00
|
|
|
},
|
Implement a custom CI script (#189)
Summary:
This CI script accomplishes two tasks:
1. It speeds up our build by parallelizing where possible.
2. It opens the possibility for running Travis cron jobs.
Currently, this script by default does the same amount of work as our
current CI script. However, I’d like to move `yarn backend` into the
list of basic actions: a backend build failure should fail CI.
Note: this script is written to be executable directly by Node, so we
can’t use Flow types with the standard syntax. Instead, we use the
comment syntax: https://flow.org/en/docs/types/comments/
Test Plan:
The following should pass with useful output:
- `npm run travis`
- `GITHUB_TOKEN="your_github_token" npm run travis -- --full`
The following should fail with useful output:
- `npm run travis -- --full` (fail)
To test different failure modes, it can be helpful to add
```js
{id: "doomed", cmd: ["false"], deps: []},
{id: "orphan", cmd: ["whoami"], deps: ["who", "are", "you"]},
```
to the list of `basicTasks` in `travis.js`.
To test performance:
```shell
$ time node ./config/travis.js >/dev/null 2>/dev/null
real 0m8.306s
user 0m20.336s
sys 0m1.364s
$ time bash -c \
> 'npm run check-pretty && npm run lint && npm run flow && CI=1 npm run test' \
> >/dev/null 2>/dev/null
real 0m12.427s
user 0m13.752s
sys 0m0.804s
```
A 50% savings is not bad at all—and the raw time saved should only
improve from here on, as the individual steps start taking more time.
wchargin-branch: custom-ci
2018-05-02 23:10:03 +00:00
|
|
|
];
|
|
|
|
|
switch (mode) {
|
|
|
|
|
case "BASIC":
|
|
|
|
|
return basicTasks;
|
|
|
|
|
case "FULL":
|
|
|
|
|
return [].concat(basicTasks, extraTasks);
|
|
|
|
|
default:
|
|
|
|
|
/*:: (mode: empty); */ throw new Error(mode);
|
|
|
|
|
}
|
|
|
|
|
}
|
